Hand Shut-Off Valves for Standard and Extended Bonnets

Transcription

1 and hut-off Valves for tandard and Extended Bonnets Product Bulletin 80-0 K Type: Angle, Globe T & Globe Y Purpose: Refrigerating pecialties Division offers a complete line of cast steel body valves with stainless steel trim. and valves are available in threaded (FPT), socket weld (W) and weld neck (WN) connections with options in globe T, angle, and globe Y body style. Designed and built to maintain reliability both in their seating and back seating functions. Maintenance costs are reduced and simplified with bolt-on bonnets. Contact Information: Parker annifin Corporation Refrigerating pecialties Division 244 outh 2th. Avenue Broadview, I phone (08) fax (08) Product Features: uitable for Ammonia, R-22, R-0, R-4a, CO 2, Nitrogen and other common refrigerants ATM 2 CB Cast teel Body 6 00 mm ( 4-2 ) Fluid Temperature Range: -0 C to 204 C (-60 F to 400 F) Type 0 tainless teel tem and packing nut; 04 tainless teel Bolts Reliable Back eating Complete ine of Bolted Bonnets 2% Carbon Filled PTFE eat inear flow Y Pattern Globe Bodies ( 4-2 ) for ow Pressure Drop Extended Bonnets for Insulation and wheel and eal Cap Interchangeable on ame Valve

2 Bulletin 80-0 K Technical Data Material: Body Cast teel (A-2 GR, CB) tandard Bonnet: 6mm - 8mm ( 4-2 ) Forged teel 0mm - 200mm (2-8 ) Ductil Iron Extended Bonnet: 6mm - 00mm ( 4-4 ) CB Cast teel tem tainless teel Packing % Carbon Filled PTFE Temperature Range: tandard Bonnet C to 204 C (-20 F to 400 F) Extended Bonnet C to 204 C (-60 F to 400 F) Maximum Rated Pressure (MRP) bar (400 psig) Description This complete line of all steel bodied valves with bolt-on bonnets is designed and built to maintain reliability both in their seating and back seating functions. This entire line is supplied with stainless steel stems for maximum corrosion resistance and back seating capability. A unique carbon filled PTFE seat is standard throughout the line, lending durability to the seating surface. In addition, a dual O-ring stem packing design along with a stem packing seal is standard on all valves 4 thru 2. This innovative design seals both the valve stem and bonnet bore with independent O-rings, which are captured in a carbon PTFE carrier. The addition of the packing provides for backup sealing capability in the unlikely event of an O-ring failure. Machined Bonnet Bore and Valve tem Packing Nut Carbon PTFE Washer Retaining Ring Carbon PTFE O-Ring Carrier and Wheel Non Asbestos Graphite Packing A packing nut design with either 4 or 6 flats provides a generous wrench engagement area, with little likelihood of rounding the flats. With the O-ring cartridge used in all valve bonnets, there will typically be no need to loosen the packing nut when opening or closing a valve. In most cases, stem resistance will be negligible, allowing the valve to be easily repositioned. Extended Bonnet The extended bonnet is available for globe style valves in the Tee body configuration and in angle style bodies. Valves are available with either hand wheel or seal cap. These caps are exclusive to this series of valves and should not be exchanged with seal caps from other R/ service valves. Note: The new hand expansion valve plugs and bonnet assemblies will not retrofit to either a prior design hand expansion valve body or to prior design stop valve. Installation crewed End The most important factor other than the valve itself in achieving a leak-tight and secure threaded valve installation is selection and preparation of mating piping. Pipe 2 and smaller should be chedule 80 teel ATM A-06 Grade B or equal, properly cut to correct length and cleanly and properly threaded with U.. National Tapered Male Pipe Threads. The male thread sealant is recommended. ealant should be applied evenly to act as a lubricant between the threads to avoid any chance of metal-tometal galling. Valve and piping should be adequately tightened with two wrenches positioned as close together as possible, but not touching the pipe threads. In horizontal piping of suction, overfeed gas return, or condenser drain lines, globe valve or angle valve stems should be horizontal to avoid liquid trapping of gas flow at the valve body casting seat orifice. eat Disc Cross-ection: Part Descriptions Before putting valves into service, all pipe connections, valve seats, bonnet seals, and stem seals should be tested for leaks at pressure levels called for in appropriate codes. ocket Weld (W) and Weld Neck (WN) Welding valves may be installed in horizontal or vertical pipelines. tems may be horizontal, vertical, or angled upward. Globe valves in horizontal suction lines or liquid overfeed return lines, condenser drain lines, purge lines, oil pot drain lines, and level control column isolation valves should preferably have stems horizontal, rather than upward, to avoid liquid or gas trapping at valve seat orifices. Inlet pressure for all valve sizes should normally be under seat valve disc, although not required. The valve stem should be open during welding. Normally, it is not necessary to disassemble valves for welding. owever, if welding is prolonged enough to overheat the body, a wet rag should be wrapped around the valve bonnet and upper body during welding. The codes applicable to the welding of socket weld valves require that the pipe be inserted into the socket until bottomed against the stop. The pipe is then to be backed out approximately /6 of an inch before welding. Use of welding rings is optional but recommended for Weld Neck valves. They help alignment, control gap for full penetration welding, and reduce welding debris entry. Welds should be annealed as necessary in accordance with good practice. Painting of valves and welds is recommended for corrosion protection. Pipe covering where applied, should have proper moisture barrier. 2

3 Bulletin 80-0 K hut-off valves leading to atmosphere, even if it is temporary, must be plugged or capped to prevent corrosion inside of the valve as well as leakage due to vibration, pressure shock, or improper opening; the valve seat should be cracked open to prevent hydrostatic expansion between the valve and the cap. Valves should never directly feed a water tank because of potential internal corrosion or seat opening caused by vibration. Before putting valves into service, all pipe connections, valve seats, bonnet seats, and stem seals should be tested for leaks at pressure levels called for in appropriate codes. and Valve pecifications Flow Path Globe Angle Globe Angle Globe Angle Globe Angle Connections Threaded &.W. Threaded &.W..W. & B.W. Weld Neck izes 4, 8, 2 4,, 4, 2 2, 2 2,, 4,, 6, 8 0, 2 Bonnet Material Forged teel Forged teel Ductile Iron Fabricated teel Body Material Cast teel Cast teel Cast teel Cast teel Packing Material Non-Asbestos Graphite Non-Asbestos Graphite Non-Asbestos Graphite Non-Asbestos Graphite eat Materials 2% Carbon Filled PTFE 2% Carbon Filled PTFE 2% Carbon Filled PTFE 2% Carbon Filled PTFE and hut Off Valve General Information Flow Coefficients Weights Globe T Globe Y Angle Globe T Globe Y Angle mm in Kv Cv Kv Cv Kv Cv kg lb kg lb kg lb Valve Bolt Torque Recommendations Torque Bolt ize Qty Bonnet crews Packing Nut mm in mkg ft lb mkg ft lb x x x x x x x x x

4 Bulletin 80-0 K FPT tandard Bonnet FPT tandard Bonnet Parts ist No. Description Material Qty 4-20 ex Jam Nut Nylon,.. 2 Washer, Flat.. Name Plate Aluminum 2 4 andwheel Ductile Iron eal Cap Aluminum 20-T 4 6 Gasket, eal Cap Nylon Nut, Packing O-ring Neoprene 9 Gland, O-ring Carbon, PTFE 0 O-ring Neoprene Washer, Packing Teflon, Carbon 2 2 Packing, tem Crane Foil Bonnet A0 4 Bolts, 6-8 x ticker, Warning 6 tem, 6 - mm ( 4-2 ) 0.. tem, 20-2mm ( 4 - ) Gasket Garlock eat Disc Ebolon 48, Carbon 20 Washer, Flat Zinc 2 Ring, Retaining Carbon 22 Globe-T Body CB ATM A2 2 Angle Body CB ATM A2 (2) mm ( 4 - ) mm ( 4-2 ) Explosion View: FPT Globe T and Angle tandard Bonnet Valves 4

5 FPT tandard Bonnet Bulletin 80-0 K Item Kit Description FPT tandard Bonnet Replacement Part Kits 6 mm ( 4 ) 0 mm ( 8 ) mm ( 2 ) ( 4 ) 2 mm ( ), 2, 4 and Wheel , 6 eal Cap Packing , 6, 8-2 Plug tem , - 2 Plug tem , 8-2 Bonnet Assembly , - 2 Bonnet Assembly (6) Gasket Pkg, Bonnet (6) Gasket Pkg, eal Cap W 6 mm ( 4 ) 0 mm ( 8 ) mm ( 2 ) ( 4 ) 2 mm ( ) 9. mm (.69 ) 9. mm (.69 ) 9. mm (.69 ) 99.6 mm (.92 ) 99.6 mm (.92 ) 4. mm (4.0 ) 4. mm (4.0 ) 4. mm (4.0 ) 2.4 mm (6.00 ) 2.4 mm (6.00 ) 4.0 mm (.6 ) 4.0 mm (.6 ) 4.0 mm (.6 ) 90. mm (.0 ) 90. mm (.0 ) Dimensional Data: FPT Globe T tandard Bonnet Valve 6. mm (2.0 ) 6. mm (2.0 ) 6. mm (2.0 ) 08.0 mm (4.2 ) 08.0 mm (4.2 ) W 6 mm ( 4 ) 0 mm ( 8 ) mm ( 2 ) ( 4 ) 2 mm ( ) 44. mm (. ) 44. mm (. ) 44. mm (. ) 2.4 mm (2.06 ) 2.4 mm (2.06 ) 4. mm (4.0 ) 4. mm (4.0 ) 4. mm (4.0 ) 2.4 mm (6.00 ) 2.4 mm (6.00 ) 4.0 mm (.6 ) 4.0 mm (.6 ) 4.0 mm (.6 ) 90. mm (.0 ) 90. mm (.0 ) Dimensional Data: FPT Angle tandard Bonnet Valve 6. mm (2.0 ) 6. mm (2.0 ) 6. mm (2.0 ) 08.0 mm (4.2 ) 08.0 mm (4.2 )

6 Bulletin 80-0 K FPT Extended Bonnet FPT Extended Bonnet Parts ist No. Description Material Qty 4-20 ex Jam Nut Nylon,.. 2 Washer, Flat.. 2 Name Plate Aluminum 4 andwheel Ductile Iron 4 eal Cap Aluminum 20-T 6 Gasket, eal Cap Nylon 6 Nut, Packing O-ring Neoprene 9 Gland, O-ring Carbon, PTFE 0 O-ring Neoprene Washer, Packing Teflon, Carbon 2 2 Packing, tem Crane Foil 9 (2) 8 0 Bonnet A0 4 Bolts, 6-8 x ticker, Warning 6 tem, 6 - mm ( 4-2 ) 0.. tem, 20-2mm ( 4 - ) Gasket Garlock eat Disc Ebolon 48, Carbon 20 Washer, Flat Zinc 2 Ring, Retaining Carbon 22 Globe-T Body CB ATM A2 2 Angle Body CB ATM A mm ( 4 - ) mm ( 4-2 ) Explosion View: FPT Globe T and Angle Extended Bonnet Valves 2 6

7 FPT Extended Bonnet Bulletin 80-0 K Item Kit Description FPT Extended Bonnet Replacement Part Kits 6 mm ( 4 ) 0 mm ( 8 ) mm ( 2 ) ( 4 ) 2 mm ( ), 2, 4 and Wheel , 6 eal Cap Packing , 6, 8-2 Bonnet Assembly , - 2 Bonnet Assembly (6) Gasket Pkg, Bonnet (6) Gasket Pkg, eal Cap W mm ( 2 ) ( 4 ) 2 mm ( ) 9. mm (.69 ) 99.6 mm (.92 ) 99.6 mm (.92 ) 84.2 mm (.2 ) 2.9 mm (8.0 ) 2.9 mm (8.0 ) 206. mm (8. ) 24.0 mm (0.0 ) 24.0 mm (0.0 ) Dimensional Data: FPT Globe T Extended Bonnet Valves 6. mm (2.0 ) 08.0 mm (4.2 ) 08.0 mm (4.2 ) W mm ( 2 ) ( 4 ) 2 mm ( ) 44. mm (. ) 2.4 mm (2.06 ) 2.4 mm (2.06 ) 84.2 mm (.2 ) 2.9 mm (8.0 ) 2.9 mm (8.0 ) 206. mm (8. ) 24.0 mm (0.0 ) 24.0 mm (0.0 ) Dimensional Data: FPT Angle Extended Bonnet Valves 6. mm (2.0 ) 08.0 mm (4.2 ) 08.0 mm (4.2 )

8 Bulletin 80-0 K ocket Weld (W) tandard Bonnet ocket Weld (W) tandard Bonnet Parts ist No. Description Material Qty 4-20 ex Jam Nut Nylon,.. 2 Washer, Flat.. Name Plate Aluminum 4 andwheel Ductile Iron 8 2 eal Cap Aluminum 6 Gasket, eal Cap Nylon 4 crew, ex Washer, Ext - tar 4 ID Nut, Packing O-ring Neoprene Gland, O-ring Carbon, PTFE 2 O-ring Neoprene 0 9 Washer, Packing Teflon, Carbon 2 4 Packing, tem Crane Foil Bonnet A0 Bolts: 6-2 mm ( 4-4 ) 6-8 x 2 mm ( 4 ) 8-6 x 2 4 (2) mm ( 2-2 ) 8-4 x mm (2 2 - ) 2 - x 2 00 mm (4 ) 8 - x 2 ticker, Warning 8 tem, 6 - mm ( 4-2 ) tem, 20-2mm ( 4 - ) Gasket Garlock eat Disc Ebolon, Carbon 22 Washer, Flat Zinc 2 Ring, Retaining Carbon 24 tem, 2-00 mm ( 4-4 ) Gasket Garlock eat Disc Ebolon, Carbon 2 Washer, Retaining Zinc - Chromate 28 Ring, Retaining Carbon - Termper teel 29 Globe-T Body CB ATM A2 0 Angle Body CB ATM A2 Glove-Y Body CB ATM A mm ( 4-4 ) mm ( 4 - ) mm ( 4-2 ) 29 0 Explosion View: ocket Weld (W) tandard Bonnet Valves 8

9 ocket Weld (W) tandard Bonnet Bulletin 80-0 K Item Kit Description 6 mm ( 4 ) ocket Weld (W) tandard Bonnet Replacement Part Kits 0 mm ( 8 ) mm ( 2 ) ( 4 ), 2, 4 and Wheel mm ( ) 2 mm ( 4 ) ( 2 ) 0 mm 6 mm (2 2 ) mm ( ) 00 mm (4 ) 2, 4,, 8 and Wheel , 6 eal Cap Packing , 8, , , Plug tem Plug tem Plug tem Disc , , , 9-2 Disc Bonnet Assembly Bonnet Assembly , 2068 Bonnet Assembly * (6) Gasket Pkg, Bonnet (6) Gasket Pkg, Bonnet (6) Gasket Pkg, eal Cap * 2 Globe T valve body only Port ize D W 6 mm ( 4 ) 9. mm (.69 ) 0.4 mm (0.4 ) 4. mm (4.0 ) 42.9 mm (.6 ) 6. mm (2.0 ) 0 mm ( 8 ) 9. mm (.69 ) 0.4 mm (0.4 ) 4. mm (4.0 ) 42.9 mm (.6 ) 6. mm (2.0 ) D D mm ( 2 ) ( 4 ) 2 mm ( ) 9. mm (.69 ) 99. mm (.92 ) 99. mm (.92 ) 0.4 mm (0.4 ) 2. mm (0.0 ) 2. mm (0.0 ) 4. mm (4.0 ) 2.4 mm (6.00 ) 2.4 mm (6.00 ) 42.9 mm (.6 ) 90. mm (.0 ) 90. mm (.0 ) 6. mm (2.0 ) 08.0 mm (4.2 ) 08.0 mm (4.2 ) 2 mm ( 4 ) 4.8 mm (6.88 ) 4. mm (0.6 ) 6. mm (6.0 ) mm (8. ) ( 2 ) 20.8 mm (8.8 ) 4. mm (0.6 ) 68. mm (6.2 ) (8.2 ) 0 mm 20.8 mm (8.8 ). mm (0.68 ). mm (6. ) 29. mm (8.6 ) 6 mm (2 2 ) 24. mm (9.0 ). mm (0.68 ) (8.2 ) 2.8 mm (9. ) Dimensional Data: W Globe T tandard Bonnet Valves 9

10 Bulletin 80-0 K ocket Weld (W) tandard Bonnet D D D D Port ize 6 mm ( 4 ) 0 mm ( 8 ) mm ( 2 ) ( 4 ) 2 mm ( ) 2 mm ( 4 ) ( 2 ) 0 mm 6 mm (2 2 ) mm ( ) 00 mm (4 ) D W 44. mm (. ) 44. mm (. ) 44. mm (. ) 2.4 mm (2.06 ) 2.4 mm (2.06 ) 6.6 mm (2.66 ) 66. mm (2.6 ) 8. mm (.08 ) 92. mm (.6 ) 92. mm (.6 ) 2.0 mm (4.4 ) 0.4 mm (0.4 ) 0.4 mm (0.4 ) 0.4 mm (0.4 ).6 mm (0. ) 2. mm (0.0 ) 4. mm (0.6 ) 4. mm (0.6 ). mm (0.68 ). mm (0.68 ). mm (0.68 ) 20.8 mm (0.82 ) 4. mm (4.0 ) 4. mm (4.0 ) 4. mm (4.0 ) 2.4 mm (6.00 ) 2.4 mm (6.00 ) 6. mm (6.0 ) 68. mm (6.2 ). mm (6. ) (8.2 ) 2.2 mm (0. ) 2. mm (0. ) 42.9 mm (.6 ) 42.9 mm (.6 ) 42.9 mm (.6 ) 90. mm (.0 ) 90. mm (.0 ) mm (8. ) (8.2 ) 29. mm (8.6 ) 2.8 mm (9. ) 29. mm (.6 ) 08.0 mm (2. ) 6. mm (2.0 ) 6. mm (2.0 ) 6. mm (2.0 ) 08.0 mm (4.2 ) 08.0 mm (4.2 ) 8.8mm (6.2 ) 8.8mm (6.2 ) Port ize 2 mm ( 4 ) ( 2 ) 0 mm 6 mm (2 2 ) mm ( ) 00 mm (4 ) D W 8.8 mm (6.2 ) 8.8 mm (6.2 ) mm (.9 ) mm (9.00 ) 28.8 mm (.2 ) 9. mm (.8 ) 4. mm (0.6 ) 4. mm (0.6 ). mm (0.68 ). mm (0.68 ). mm (0.68 ) 20.8 mm (0.82 ) 6. mm (6.0 ) 6. mm (6.0 ) 4.6 mm (6.88 ) 2.9 mm (8.0 ) 2.2 mm (0. ) 29.4 mm (.00 ) 96.9 mm (. ) 96.9 mm (. ) (8.2 ) 2.8 mm (9. ) 28.8 mm (.2 ) 04.8 mm (2.00 ) Dimensional Data: W Globe Y tandard Bonnet Valves 8.8mm (6.2 ) 8.8mm (6.2 ) Dimensional Data: W Angle tandard Bonnet Valves 0

11 ocket Weld (W) Extended Bonnet Bulletin 80-0 K ocket Weld (W) Extended Bonnet Parts ist No. Description Material Qty 4-20 ex Jam Nut Nylon,.. 2 Washer, Flat.. Name Plate Aluminum andwheel Ductile Iron eal Cap Aluminum 4 6 Gasket, eal Cap Nylon crew, ex Washer, Ext - tar 4 ID.. 9 Nut, Packing O-ring Neoprene Gland, O-ring Carbon, PTFE 2 O-ring Neoprene Washer, Packing Teflon, Carbon 2 4 Packing, tem Crane Foil Bonnet A (2) Bolts: 6-2mm ( 4-4 ) 6-8 x 2mm ( 4 ) 8-6 x mm ( 2-2 ) 8-4 x mm (2 2 - ) 2 - x 2 00 mm (4 ) 8 - x 2 ticker, Warning 8 tem, 6 - mm ( 4-2 ) tem, 20-2mm ( 4 - ) Gasket Garlock eat Disc Ebolon, Carbon mm ( 4-4 ) mm ( 4 - ) mm ( 4-2 ) 22 Washer, Flat Zinc 2 Ring, Retaining Carbon 24 tem, 2-00 mm ( 4-4 ) Gasket Garlock eat Disc Carbon - Ebolon 48 2 Washer, Retaining Zinc - Chromate 28 Ring, Retaining Carbon - Termper teel 29 Globe-T Body CB ATM A Angle Body CB ATM A2 Glove-Y Body CB ATM A Explosion View: ocket Weld (W) Extended Bonnet Valves

12 Bulletin 80-0 K ocket Weld (W) Extended Bonnet Item Kit Description 6 mm ( 4 ) ocket Weld (W) Extended Bonnet Replacement Part Kits 0 mm ( 8 ) mm ( 2 ) ( 4 ) 2 mm ( ), 2, 4 and Wheel mm ( 4 ) ( 2 ) 0 mm 6 mm (2 2 ) mm ( ) 00 mm (4 ) 2, 4,, 8 and Wheel , 6 eal Cap Packing Disc , , , 9-2 Disc Bonnet Assembly Bonnet Assembly , 209 Bonnet Assembly * (6) Gasket Pkg, Bonnet (6) Gasket Pkg, Bonnet (6) Gasket Pkg, eal Cap * 2 Globe T valve body only 2

13 ocket Weld (W) Extended Bonnet Bulletin 80-0 K D D D D Port ize mm ( 2 ) ( 4 ) 2 mm ( ) 2 mm ( 4 ) ( 2 ) 0 mm 6 mm (2 2 ) D W 9. mm (.69 ) 99. mm (.92 ) 99. mm (.92 ) 4.8 mm (6.88 ) 20.8 mm (8.8 ) 20.8 mm (8.8 ) 24. mm (9.0 ) 0.4 mm (0.4 ) 2. mm (0.0 ) 2. mm (0.0 ) 4. mm (0.6 ) 4. mm (0.6 ). mm (0.68 ). mm (0.68 ) 42.9 mm (.6 ) 90. mm (.0 ) 90. mm (.0 ) mm (8. ) (8.2 ) 29. mm (8.6 ) 2.8 mm (9. ) 84.2 mm (.2 ) 2.9 mm (8.0 ) 2.9 mm (8.0 ) 2.2 mm (0. ) 292. mm (.0 ) 292. mm (.0 ).2 mm (2.2 ) Dimensional Data: W Globe T Extended Bonnet Valves 6. mm (2.0 ) 08.0 mm (4.2 ) 08.0 mm (4.2 ) Port ize mm ( 2 ) ( 4 ) 2 mm ( ) 2 mm ( 4 ) ( 2 ) 0 mm 6 mm (2 2 ) mm ( ) 00 mm (4 ) D W 44. mm (. ) 2.4 mm (2.06 ) 2.4 mm (2.06 ) 6.6 mm (2.66 ) 66. mm (2.6 ) 8. mm (.08 ) 92. mm (.6 ) 92. mm (.6 ) 2.0 mm (4.4 ) 44. mm (. ) 2.4 mm (2.06 ) 2.4 mm (2.06 ) 6.6 mm (2.66 ) 66. mm (2.6 ) 8. mm (.08 ) 92. mm (.6 ) 92. mm (.6 ) 2.0 mm (4.4 ) 42.9 mm (.6 ) 90. mm (.0 ) 90. mm (.0 ) mm (8. ) (8.2 ) 29. mm (8.6 ) 2.8 mm (9. ) 29. mm (.6 ) 08.0 mm (2. ) 84.2 mm (.2 ) 2.9 mm (8.0 ) 2.9 mm (8.0 ) mm (9.00 ) 244. mm (9.6 ) 24.0 mm (0.00 ) 266. mm (0.0 ) mm (. ) 2.0 mm (2.88 ) 6. mm (2.0 ) 08.0 mm (4.2 ) 08.0 mm (4.2 ) 8.8mm (6.2 ) 8.8mm (6.2 ) Dimensional Data: W Angle Extended Bonnet Valves

14 Bulletin 80-0 K Weld Neck (WN) tandard Bonnet (2) mm (0-2 ) mm ( - 8 ) 2-00 mm (-/4-4 ) Explosion View: Weld Neck (WN) tandard Bonnet Valves 2 4

15 Weld Neck (WN) tandard Bonnet Bulletin 80-0 K Item Kit Description Weld Neck (WN) tandard Bonnet Replacement Part Kits 2 mm ( 4 ) ( 2 ) 0 mm 6 mm (2 2 ) mm ( ) 00 mm (4 ), 2,, and Wheel , Cap, eal Packing , - 2 Plug tem Disc , - 2 Disc Bonnet Assembly * (6) Gasket, Bonnet (6) Gasket, eal Cap * 2 Globe T valve body only Item Kit Description Weld Neck (WN) tandard Bonnet Replacement Part Kits 2 mm ( ) 0 mm (6 ) 200 mm (8 ) (0 ) 00 mm, 2, 4 and Wheel Kit , Cap, eal Packing , 2 Plug tem * 2040 * * Plug tem Disc Disc , 8-2, 22-2 Bonnet Assembly , 24-0 Bonnet Assembly (2) Gasket, Bonnet (2) Gasket, Bonnet (6) Gasket, eal Cap * Plug stem are for valve 2006 and present. For valves older than 2006 purchase a complete bonnet assembly kit

16 Bulletin 80-0 K Weld Neck (WN) tandard Bonnet Parts ist No. Description Material Qty crew, ex Washer, Ext - tar 4 ID.. Washer, Flat.. 4 Name Plate Aluminum andwheel Ductile Iron 6 eal Cap Aluminum 20-T Gasket, eal Cap Nylon 8 Nut, Packing O-ring Neoprene 0 Gland, O-ring Carbon, PTFE O-ring Neoprene 2 Washer, Packing Teflon, Carbon 2 Packing, tem Crane Foil 4 Bonnet: 2-00 mm ( 4-4 ) A0 Bolts: 2 mm ( 4 ) 8-6 x 40-0 mm ( 2-2 ) 8-4 x mm (2 2 - ) 2 - x 2 00 mm (4 ) 8 - x mm ( - 6 ) 8 - x Weld Neck (WN) tandard Bonnet W mm ( ) 00 mm (4 ) mm (. ) 04.8 mm (2.00 ) 08.0 mm (2. ) 90. mm (.8 ) 46. mm (.6 ) 42. mm (6. ) 8.8 mm (6.2 ) 8.8 mm (6.2 ) Dimensional Data: Weld Neck (WN) Globe T tandard Bonnet Valves 200 mm (8 ) 8 - x mm (0-2 ) 8-9 x ticker, Warning tem: 2-00 mm ( 4-4 ) eat Disc Ebolon 48, Carbon 9 Washer, Retaining Zinc - Chromate 20 Ring, Retaining Carbon - teel 2 Gasket Garlock Bonnet: mm ( - 8 ) A0 2 tem: mm ( - 8 ) Bonnet: mm (0-2 ) A0 2 tem: mm (0-2 ) eat Disc Carbon PTFE 2 Ring, Retaining A6 28 Washer, Int. tar 0.2 ID.. 29 crew, 4-20 x Gasket Garlock 290 Globe-T Body CB ATM A2 2 Angle Body CB ATM A2 Glove-Y Body CB ATM A2 6

17 Weld Neck (WN) tandard Bonnet Bulletin 80-0 K W 2 mm ( 4 ) ( 2 ) 0 mm 6 mm (2 2 ) mm ( ) 00 mm (4 ) 2 mm ( ) 0 mm (6 ) 200 mm (8 ) (0 ) 00 mm 6.6 mm (2.66 ) 66. mm (2.6 ). mm (.04 ) 92. mm (.6 ) 9.4 mm (.60 ) 2.0 mm (4.4 ) 4.0 mm (6.06 ) 62.6 mm (6.40 ) mm (.88 ) 24. mm (9. ) 266. mm (0.0 ) 6. mm (6.0 ) 68. mm (6.2 ). mm (6. ) (8.2 ) 2.2 mm (0. ) 2. mm (0. ) 0.6 mm (.88 ) 84.2 mm (. ) 44. mm (.6 ). mm (4.6 ) 6.6 mm (29.00 ) mm (8. ) (8.2 ) 29. mm (8.6 ) 2.8 mm (9. ) 29. mm (.6 ) 08.0 mm (2. ) 400. mm (. ) mm (9.00 ) 46. mm (2.0 ) mm (26.88 ) 9.8 mm (.2 ) 8.8mm (6.2 ) 8.8mm (6.2 ) 04.8 mm (2.00 ) 04.8 mm (2.00 ) 04.8 mm (2.00 ) 42.8 mm (6.2 ) 42.8 mm (6.2 ) Dimensional Data: Weld Neck (WN) Angle tandard Bonnet Valves W 2 mm ( 4 ) ( 2 ) 0 mm 6 mm (2 2 ) mm ( ) 00 mm (4 ) 2 mm ( ) 0 mm (6 ) 200 mm (8 ) (0 ) 00 mm.8 mm (.00 ) 9.8 mm (.6 ) mm (8.2 ) 24. mm (9. ) 28.8 mm (.2 ) 00. mm (.82 ) mm (9.2 ).6 mm (2.88 ).6 mm (28.2 ) mm (. ) 02.4 mm (40.4 ) 6. mm (6.0 ) 6. mm (6.0 ) 4.6 mm (6.88 ) 2.9 mm (8.0 ) 2.2 mm (0. ) 29.4 mm (.00 ).8 mm (4.88 ) 4.2 mm (8.00 ) 46. mm (2.0 ) 0. mm (28. ) mm (.2 ) 96.9 mm (. ) 96.9 mm (. ) (8.2 ) 2.8 mm (9. ) 28.8 mm (.2 ) 04.8 mm (2.00 ) 44. mm (.6 ) 2. mm (20. ) 66.0 mm (24.2 ). mm (0.8 ) 88.8 mm (4.88 ) 8.8 mm (6.2 ) 8.8 mm (6.2 ) 04.8 mm (2.00 ) 04.8 mm (2.00 ) 04.8 mm (2.00 ) 42.8 mm (6.2 ) 42.8 mm (6.2 ) Dimensional Data: Weld Neck (WN) Globe Y tandard Bonnet Valves

18 Bulletin 80-0 K Weld Neck (WN) Extended Bonnet Weld Neck (WN) Extended Bonnet Parts ist No. Description Material Qty crew, ex Washer, Ext - tar 4 ID.. Washer, Flat.. 4 Name Plate Aluminum andwheel Ductile Iron eal Cap Aluminum 20-T Gasket, eal Cap Nylon 8 Nut, Packing O-ring Neoprene 0 Gland, O-ring Carbon, PTFE O-ring Neoprene 2 Washer, Packing Teflon, Carbon 2 Packing, tem Crane Foil 4 Bonnet: 2-00 mm ( 4-4 ) A0 Bolts: 2 mm ( 4 ) 8-6 x (2) 40-0 mm ( 2-2 ) 8-4 x mm (2-/2 - ) 2 - x mm (4 ) 8 - x 2 6 ticker, Warning tem: 2-00 mm ( 4-4 ) eat Disc Ebolon 48, Carbon 9 Washer, Retaining Zinc - Chromate 20 Ring, Retaining Carbon - teel 2 Gasket Garlock Globe-T Body CB ATM A2 2 Angle Body CB ATM A2 24 Glove-Y Body CB ATM A mm (-/4-4 ) Explosion View: Weld Neck (WN) Extended Bonnet Valves 8

19 Weld Neck (WN) Extended Bonnet Bulletin 80-0 K Item Kit Description Weld Neck (WN) Extended Bonnet Replacement Part Kits 2 mm ( 4 ) ( 2 ) 0 mm 6 mm (2 2 ) mm ( ) 00 mm (4 ), 2,, and Wheel , Cap, eal Packing Disc , - 2 Disc Bonnet Assembly * Gasket, Bonnet Gasket, eal Cap * 2 Globe T valve body only W mm ( ) 00 mm (4 ) mm (.2 ) 2.9 mm (2. ) 6.6 mm (.2 ) 8.4 mm (.2 ) 46. mm (.6 ) 42. mm (6. ) 8.8 mm (6.2 ) 8.8 mm (6.2 ) Dimensional Data: Weld Neck (WN) Globe T Extended Bonnet Valves W 2 mm ( 4 ) ( 2 ) 0 mm 6 mm (2 2 ) 6.6 mm (2.66 ) 66. mm (2.6 ) 8. mm (.08 ) 92. mm (.6 ) mm (8. ) (8.2 ) 29. mm (8.6 ) 2.8 mm (9. ) mm (9.00 ) 244. mm (9.6 ) 24.0 mm (0.00 ) 266. mm (0.0 ) mm ( ) 92. mm (.6 ) 29. mm (.6 ) mm (. ) 8.8mm (6.2 ) 00 mm (4 ) 2.0 mm (4.4 ) 08.0 mm (2. ) 2.0 mm (2.88 ) 8.8mm (6.2 ) Dimensional Data: Weld Neck (WN) Angle Extended Bonnet Valves 9

20 and hut-off Bonnet ole Dimensions A B 6 mm ( 4 ) 0 mm ( 8 ) 44. mm (. ). mm (.24 ) mm ( 2 ) ( 4 ) 2 mm ( ) 6.9 mm (2.24 ) 42. mm (.68 ) A B 2 mm ( 4 ) 69.9 mm (2. ).6 mm (2.0 ) ( 2 ) 0 mm 88.9 mm (.0 ) 6.0 mm (2.6 ) 6 mm (2 2 ) 04.9 mm (4. ) 6.2 mm (.00 ) mm ( ) 20. mm (4. ) 9.9 mm (.62 ) 00 mm (4 ) 46. mm (. ) 0.0 mm (4. ) B A andwheel Kit for ubbel Valves ubbell Valve O.D. Reference R/ Valve ize Kit tem Dimension to /6 quare to /6 quare to /8 quare to /2 quare to /4 quare /4 quare /4 4 to /8 quare afe Operation (ee Bulletin RBV) People doing any work on a refrigeration system must be qualified and completely familiar with the system and the Refrigerating pecialties Division valves involved, or all other precautions will be meaningless. This includes reading and understanding pertinent Refrigerating pecialties Division Product Bulletins and afety Bulletin RB prior to installation or servicing work. Where cold refrigerant liquid lines are used, it is necessary that certain precautions be taken to avoid damage which could result from liquid expansion. Temperature increase in a piping section full of solid liquid will cause high pressure due to the expanding liquid which can possibly rupture a gasket, pipe or valve. All hand valves isolating such sections should be marked, warning against accidental closing, and must not be closed until the liquid is removed. Check valves must never be installed upstream of solenoid valves, or regulators with electric shut-off, nor should hand valves upstream of solenoid valves or downstream of check valves be closed until the liquid has been removed. It is advisable to properly install relief devices in any section where liquid expansion could take place. Avoid all piping or control arrangements which might produce thermal or pressure shock. For the protection of people and products, all refrigerant must be removed from the section to be worked on before a valve, strainer, or other device is opened or removed. Flanges with OD connections are not suitable for ammonia service. Warranty All Refrigerating pecialties products are under warranty against defects in workmanship and materials for a period of one year from date of shipment from factory. This warranty is in force only when products are properly installed, field assembled, maintained, and operated in use and service as specifically stated in Refrigerating pecialties Catalogs or Bulletins for normal refrigeration applications, unless otherwise approved in writing by the Refrigerating pecialties Division. Defective products, or parts thereof returned to the factory with transportation charges prepaid and found to be defective by factory inspection, will be replaced or repaired at Refrigerating pecialties option, free of charge, F.O.B. factory. Warranty does not cover products which have been altered, or repaired in the field, damaged in transit, or have suffered accidents, misuse, or abuse. Products disabled by dirt or other foreign substances will not be considered defective. The express warranty set forth above constitutes the only warranty applicable to Refrigerating pecialties products, and is in lieu of all other warranties, expressed or implied, written including any warranty of merchantability, or fitness for a particular purpose. In no event is Refrigerating pecialties responsible for any consequential damages of any nature whatsoever. No employee, agent, dealer or other person is authorized to give any warranties on behalf of Refrigerating pecialties, nor to assume, for Refrigerating pecialties, any other liability in connection with any of its products. 202 Parker annifin Corporation 002 K ECN: /0/2 IO 900 CERTIFIED