Baumann Series Flexsleev Control Valve Instructions
|
|
- Lawrence Nicholson
- 6 years ago
- Views:
Transcription
1 Instruction Baumann Series Instructions Baumann Series Flexsleev Control Valve Instructions Contents Introduction...1 Scope...1 Safety Precautions...1 Maintenance...2 Installation...3 Air Piping...3 Disassembly of Valve...3 Reassembly of Valve...4 Changing Valve Travel...5 Parts List...7 Dimensions...8 Weights...8 INTRODUCTION The Baumann Series Flexsleev Control Valve is excellent for the precise control of acids or caustic process media. The Series Flexsleev valve incorporates the benefi ts of packless valves with the corrosion resistance of all-plastic wetted parts. Available in rated Cv s from 1 through 5.2, this valve features a ductile iron body with fl ange connections that mate with 1 class 125 Flat Face (FF) or 150 Raised Face (RF) fl anges. SCOPE OF MANUAL This instruction manual includes installation, maintenance, and parts information for the Baumann series Flexsleev sanitary control valve. No person may install, operate or maintain an series control valve without first being fully trained and qualifi ed in valve, actuator and accessory installation, operation and maintenance, and carefully reading and understanding the contents of this manual. If you have any questions about these instructions contact your Fisher sales offi ce before proceeding. NOTE Neither Emerson, Emerson Process Management, Fisher, nor any of their affiliated entities assumes responsibility for the selection, use and maintenance of any product. Responsibility for the selection, use and maintenance of any product remains with the purchaser and end-user. Always wear protective gloves, clothing, and eye wear when performing any installation operations to avoid personal injury. Personal injury or equipment damage caused by sudden release of pressure or bursting of pressure retaining parts might result if service conditions exceed those for which the product was intended. To avoid injury or damage, provide relief valve for over pressure protection as required by government or accepted industry codes and good engineering practices. Check with your process or safety engineer for any additional measures that must be taken to protect against process media. If installing into an existing application, also refer to the WARNING at the beginning of the Maintenance section in this instruction manual. 1
2 Baumann Series Instructions Instruction This valve is intended for a specific range of pressures, temperatures and other application specifications. Applying different pressures and temperatures to the valve could result in parts damage, malfunction of the control valve or loss of control of the process. Do not expose this product to service conditions or variables other than those for which the product was intended. If you are not sure what these conditions are you should contact your Fisher sales office for more complete specifications. Provide the product serial numbers (shown on the nameplate) and all other pertinent information. If you move or work on an actuator installed on a valve with loading pressure applied, keep your hands and tools away from the stem travel path to avoid personal injury. Be especially careful when removing the stem connector to release all loading on the actuator stem whether it be from air pressure on the diaphragm or compression in the actuator springs. Likewise take similar care when adjusting or removing any optional travel stop. Refer to the relevant actuator maintenance instructions. MAINTENANCE Avoid personal injury or property damage from sudden release of process pressure or bursting of parts. Before performing any maintenance operations: Always wear protective gloves, clothing, and eye wear when performing any maintenance operations to avoid injury. Disconnect any operating lines providing air pressure, electric power or a control signal to the actuator. Be sure the actuator cannot suddenly open or close the valve. Use bypass valves or completely shut off the process to isolate the valve from the process pressure. Relieve the process pressure from both sides of the valve. Depending on the actuator construction, it will be necessary to manage the pneumatic actuator spring pre-compression. It is essential to refer to the relevant actuator instructions in this manual for safe removal of the actuator from the valve. Use lock-out procedures to be sure that the above measures stay in effect while you work on the equipment. The valve packing box may contain process fluids that are pressurized, even when the valve has been removed from the pipeline. Process fluids may spray out under pressure when removing the packing hardware or packing rings, or when loosening the packing box pipe plug. 2
3 Instruction INSTALLATION NOTE Whenever a gasket seal is disturbed by removing or shifting gasketed parts, install a new gasket during reassembly. This provides a good gasket seal because the used gasket may not seal properly. Before attempting to do any work on a valve while the system is in operation, the valve must be isolated 100% from the active system and the isolated line voided of pressure and/or hazardous fluids. CAUTION The seating core (2) protrudes slightly beyond one side of valve body (1); to avoid equipment damage the included PTFE encapsulated line flange adapter gaskets (21) should be utilized. (Refer to Figure 1). Avoid personal injury or property damage by thoroughly cleaning the line of all dirt, welding chips, scale, oil or grease, and other foreign material. Failure to do so could result in damage to the seating and sealing surfaces of the valve and result in release of process materials. Baumann Series Instructions 1. Before installing the valve in the pipeline, thoroughly clean the line of all dirt, welding chips, scale, oil or grease, and other foreign material. A micron size filter is recommended upstream of the valve. 2. Install the valve so the controlled fl uid will fl ow through the valve body in the direction indicated by the arrow on the valve body. 3. A three-valve bypass must be used to permit removal of the control valve from the line without shutting down the system. 4. In case of a heat-insulated installation, insulate the valve body only, not the bonnet. AIR PIPING 1. For an air-to-extend actuator (air-to-close action), con nect the actuating air pressure line to the 1/4 NPT opening in the upper diaphragm case. For an air-to-retract actuator (air-to-open action) connect the actuating air pressure line to the 1/4 NPT in the lower diaphragm case. 2. Use 1/4 in. (6.4 mm) O.D. tubing or equivalent for all air lines except if air lines exceed 25 ft. (8 m) in length, then 3/8 in. (9.5 mm) tubing should be used. Air lines must not leak and air pressure should not exceed 35 psig (2.5 barg). 3. To detect a rupture of the sealing tube (5), connect vent of opening (12) to a separate vessel, vent area or to a pressure gauge. Pressure buildup indicates internal seal damage. Shut down system immediately! (Refer to Figure 1). BODY DISASSEMBLY (Refer to Figures 1, 2, and 3) 1. Mount the valve in a vise taking care not to damage the inserts, or clamp by the lip of the fl ange in a soft jaw insert in the vise (Figure 1). Caution must be taken not to damage the flange faces or seating core. 2. Unscrew yoke drive nut (9) and lift complete actuator, with amplifi cation mechanism (8) from valve body (1). Stem (3) should be at maximum upper extension (pull up). 3
4 Baumann Series Instructions Instruction 3. Using a small, round plastic or wooden rod, placed in Port B of seating core (2), gently tap seating core (2) together with sealing tube (5) from the body (1). 4. Slide sealing tube (5) off seating core (2) by pulling and turning (Figure 2). 5. Inspect seating surface (2A) and seating core (2) for damage and replace if necessary. NOTE: For changing fl ow capacity, you may need to use a core with a different orifi ce diameter (Parts Table 1). 6. Replace o-rings (6). 7. Inspect sealing tube (5) for wear and replace if necessary. 8. Remove plug (4) and stem (3) from body by holding plug (4) by hand and unscrewing stem (3) by using a 1/2 in. open wrench on the hex head. Inspect and replace packing follower subassembly (10) if necessary. REASSEMBLY 1. Slide sealing tube (5) over seating core (2) with o-rings (6) in place. 2. Replace plug (4) in body. Apply low strength LOCTITE no. 222MS, that can be mechanically separated, on thread of stem (3). Supporting plug (4) by hand, screw stem (3) onto plug using a 1/2 inch open wrench on the hex head. 3. Slide seating core (2) with sealing tube (5) into body (1) from "A" side of the valve body. Orifice (2A, Figure 2) must point exactly vertical up. Locate small hole in core fl ange (2B) to match center punch mark (1B) on surface of body fl ange (Figures 1 and 2). 4. When raised rim of seating core (2) enters recess of body (1), use flat smooth piece of wood or plastic to tap rim into the recess. Support spacer (120) to keep it from extending. 5. Attach a temporary pipe flange with air connection to inlet body flange and apply 10 to 50 psi air. Push down stem (3), and see if valve shuts off. If valve leaks, then core may be rotated off vertical center. Repeat step 3 and An Internal Seals Leak Test is very important and should be performed at this point. Attach a bolt-on blind fl ange to the "B" side of the valve. Be sure to install a line flange adapter gasket (21) between body and blind fl ange. Apply 50 lbs. of pressure on the "A" side of the valve. Remove bottom plug and either apply a bubble-tech solution or attach a small length of hose. If using the hose, insert 1/4 inch into a container of water. Initially, bubbles may appear but should slow to none. If there is a steady stream of bubbles the seals may be compromised. If this is the case, check core, o-rings and sealing tube for dents or grooves. Replace any damaged parts and proceed from step 2 above. 7. Attach temporary air line to actuator if air-to-retract (ATO) and bring actuator stem all the way up. Slide actuator with amplifi er assembly (8) half way over valve bonnet. Slip in drive nut (9) and engage bonnet thread. 8. Tighten actuator yoke with drive nut (9). 9. With air pressure in actuator (see step 7), slowly extend actuator stem down by varying the pneumatic actuator signal. Valve should shut off between 3 and 5 psig (depending on the internal pressure selected) for air-to-retract (ATO), or between 13 and 15 psig for air-to-extend (ATC). If shut-off is not obtained, loosen jam nut (27) and turn pusher pin (13) out of actuator stem in order to increase load on upper linkage (8A). If both upper link (8A) and lower link (8B) touch at lowest actuator travel and valve does not close, this indicates that the valve stem (3) is too short. Hold hex head with 1/2 inch open wrench and turn button-head screw (11) partially out of the stem (3). This may be necessary if core (2) is replaced. NOTE: If actuator travel is 1/8 inch short, this will require 1 turn of the screw (11) if linkage is 4:1 or 1/2 turn if linkage is 8:1. 4
5 Instruction Baumann Series Instructions CHANGING VALVE TRAVEL A change in the valve fl ow capacity may involve a different seating core (2) and a change in the valve travel. This is done by replacing the lower link (8B). Simply remove the cotter pin (8E, Table 2) to release the clevis pin (8C), slide out the lower link (8B) and add the new link. NOTE: The longer link reduces valve travel. Readjust pusher pin (13) or button head screw (11) as required for correct seating of valve. 5
6 Baumann Series Instructions Instruction A B Figure 1. Valve Body Assembly 8A 2A 8B 2B D 8C 8F Figure 2. Seating Core, Sealing Tube and O-Rings Figure 3. Mechanical Linkage Assembly, Key No. 8. 6
7 Instruction Baumann Series Instructions Table 1. PARTS LIST KEY NO. QTY DESCRIPTION PART NO. 1 1 Body Seating Core, Cv = Seating Core, Cv = 2.0 and Seating Core, Cv = Stem Plug * 1 Sealing Tube * 3 O-Ring Sleeve Mechanical Linkage Subassembly, Cv = 1.0 and Mechanical Linkage Subassembly, Cv = 3.8 and Drive Nut (Yoke) * 1 Packing Follower Subassembly Button Head Cap Screw Hex Head Pipe Plug Pusher Pin Compression Spring Washer Line Flange Adapter Gaskets Locknut Travel Indicator Spacer * Recommended Spare Parts Table 2. MECHANICAL LINKAGE ASSEMBLY, KEY NO. 8, TABLE 1. KEY Cv = 1.0 & 2.0 Cv = 3.8 & 5.2 QTY DESCRIPTION NO. PART NO. 8A 1 Upper Link B 1 Lower Link C 2 Clevis Pin D 1 Support Bracket E 2 Cotter Pin ( not visible from front) F 2 Bushing (not shown)
8 Baumann Series Instructions Instruction 3660/3661 Direct PTFE covered line fl ange adapter gaskets provided with valve. Figure 4. Dimensions; Actuator requires 4-1/2 in (115 mm) vertical clearance. (Valves rotated 90 0 for clarity.) CAUTION: The PTFE valve body insert protrudes slightly beyond both sides of valve body, it is highly recommended that the included PTFE encapsulated line fl ange adapter gaskets (21) be utilized. Table 3. VALVE AND ACTUATOR WEIGHTS DVC6010 FIELDVUE Digital Valve Controller PTFE covered line fl ange adapter gaskets provided with valve. (See CAUTION below) VALVE WEIGHT ACTUATOR WEIGHT lbs kg Type lbs kg FIELDVUE, Flexsleev, Fisher and Baumann are marks owned by Fisher Controls International LLC, a member of the Emerson Process Management business division of Emerson Electric Co. Emerson and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners. This product may be covered under one or more of the following patents 4,882,002, 4,953,824 or under pending patent applications. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifi cations of such products at any time without notice. Neither Emerson, Emerson Process Management, Fisher, nor any of their affi liated entities assumes responsibility for the selection, use and maintenance of any product. Responsibility for the selection, use and maintenance of any product remains with the purchaser and end-user. Emerson Process Management Fisher Controls International LLC 130 International Drive Portsmouth, NH T 1 (603) F 1 (603) Fisher Controls International LLC 2007; All Rights Reserved Printed in USA 8
Baumann 24000C Carbon Steel Little Scotty Control Valve Instructions
Instruction Manual D103356X012 24000C Control Valve Baumann 24000C Carbon Steel Little Scotty Control Valve Instructions CONTENTS Introduction...1 Scope...1 Safety Precautions...1 Maintenance...2 Flow
More informationBaumann Mikroseal Control Valve
Instruction Manual 81000 Valve Baumann 81000 Mikroseal Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Maintenance... 3 Installation... 3 Air Piping... 4 Flow Direction...
More informationBaumann Sanitary Diaphragm Angle and Inline Control Valve
Instruction Manual 84000 Valve Baumann 84000 Sanitary Diaphragm Angle and Inline Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Maintenance... 2 Flow Direction...
More informationBaumann Sanitary Control Valve
Instruction Manual 89000 Valve Baumann 89000 Sanitary Control Valve Contents Introduction... 2 Scope of Manual... 2 Educational Services... 2 Safety Precautions... 3 Maintenance... 4 Installation... 4
More informationBaumann Way Control Valve
Instruction Manual 24003 Valve Baumann 24003 3-Way Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Educational Services... 3 Maintenance... 3 Installation... 3 Air
More informationBaumann Sanitary Angle Control Valve
Baumann 83000 Sanitary Angle Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Educational Services... 2 Maintenance... 3 Installation... 3 Air Piping... 4 Flow Direction...
More informationBaumann Little Scotty Bronze Control Valve
Instruction Manual 24000 Valve Baumann 24000 Little Scotty Bronze Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Maintenance... 2 Installation... 3 Air Piping...
More informationBaumann 24000F Wafer Control Valve
Instruction Manual 24000F Valves Baumann 24000F Wafer Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Maintenance... 2 Installation... 3 Air Piping... 3 Disassembly...
More informationBaumann Sanitary Diaphragm Angle & In-Line Control Valve Instructions
Instruction Manual D103370X012 84000 Control Valve Baumann 84000 Sanitary Diaphragm Angle & In-Line Control Valve Instructions CONTENTS Introduction...1 Scope...1 Safety P recautions...1 Maintenance...2
More informationFisher 3024C Diaphragm Actuator
Instruction Manual 3024C Actuator Fisher 3024C Diaphragm Actuator Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 3 Installation... 5 Mounting the Actuator on the Valve...
More informationBaumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Valve Instructions
Instruction Manual D103360X012 24000CVF/SVF Control Valve Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Valve Instructions CONTENTS Introduction...1 Scope of Manual...1 Safety Precautions...1-2
More informationFisher 2052 Diaphragm Rotary Actuator
Instruction Manual 2052 Actuator Fisher 2052 Diaphragm Rotary Actuator Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 4 Installation... 4 Actuator Mounting and Changing
More informationFisher RSS Lined Globe Valve
Instruction Manual D0990 November 009 RSS Valve Fisher RSS Lined Globe Valve Contents Introduction............................... Scope of Manual.......................... Description...............................
More informationBaumann Pneumatic Actuators
Instruction Manual Baumann Pneumatic Actuators Baumann Pneumatic Actuators Contents Introduction... 1 Scope of Manual... 1 Design Notes... 2 Installation... 2 Attaching an Air-to-Retract (ATR) Actuator
More informationFisher RSS Lined Globe Valve
Instruction Manual D0990 RSS Valve July 07 Fisher RSS Lined Globe Valve Contents Introduction... Scope of Manual... Description... Educational Services... Specifications... Installation... Maintenance...
More informationFisher 656 Diaphragm Actuator
Instruction Manual 656 Actuator Fisher 656 Diaphragm Actuator Contents Introduction... 1 Scope of Manual... 1 Description... 1 Principle of Operation... 2 Specifications... 2 Maximum Pressure Limitations...
More informationFisher 644 and 645 Differential Pressure Pump Governors
Instruction Manual 644 and 645 Pump Governors Fisher 644 and 645 Differential Pressure Pump Governors Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Educational Services...
More informationType 644 and 645 Differential Pressure Pump Governors
Instruction Manual 644 and 645 Pump Governors Type 644 and 645 Differential Pressure Pump Governors Introduction Scope of Manual This instruction manual provides information on installation, adjustment,
More informationFisher 1B and 1BR Constant Pressure Pump Governor Actuators
Instruction Manual 1B Actuator Fisher 1B and 1BR Constant Pressure Pump Governor Actuators Figure 1. Fisher 1B Actuator on Direct Acting easy e Valve W2232 1 Introduction Scope of Manual This instruction
More informationFisher D2T FloPro Control Valve
Instruction Manual D2T FloPro Valve Fisher D2T FloPro Control Valve Contents Introduction... 1 Scope of Manual... 1 Description... 1 Educational Services... 2 Specifications... 3 Installation... 3 Setting
More informationFisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
More informationFisher 685 Piston Actuator
Instruction Manual 685 Piston Actuator Fisher 685 Piston Actuator Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Educational Services... 3 Principle of Operation...
More informationM Series Manual Handwheel Gear Actuator
Instruction Manual M Series Actuator M Series Manual Handwheel Gear Actuator Contents Introduction............................... 1 Scope of Manual......................... 1 Description..............................
More informationModel DF233 Control Valve
Figure 1 DF233 Control Valve TABLE OF CONTENTS Introduction 2 Body and Packing Reassembly 7 Specifications 3 Fail Closed Actuator Reassembly 8 Valve Sizes 3 Fail Open Actuator Reassembly 9 Unpacking 4
More informationBaumann Pneumatic Pressure Controller (for Industrial and Sanitary Applications)
Bulletin Baumann 96000 Pneumatic Pressure Controller Baumann 96000 Pneumatic Pressure Controller (for Industrial and Sanitary Applications) The Baumann 96000 Pressure Controller is a very rugged instrument
More informationModel DF269 Control Valve
Figure 1 DF269 Control Valve TABLE OF CONTENTS Introduction 2 Fail Open Actuator Disassembly 6 General 2 Body and Packing Reassembly 7 Scope 2 Fail Closed Actuator Resassembly 8 Specifications 3 Fail Open
More informationFisher TBX Hydro Plug Fixture
Instruction Manual TBX Hydro-Plug Fixture Fisher TBX Hydro Plug Fixture Contents Introduction... 1 Scope of Manual... 1 Description... 2 Educational Services... 2 Principle of Operation... 2 Maintenance...
More informationDesign GX Control Valve and Actuator System
Instruction Manual GX Valve and Actuator Design GX Control Valve and Actuator System Contents Introduction............................... 1 Scope of Manual......................... 1 Description..............................
More informationM Series Manual Handwheel Gear Actuator
Instruction Manual D500237X0 M Series Actuator M Series Manual Handwheel Gear Actuator Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 1 Installation... 3 Operation...
More informationFisher CVX Hydro Plug Fixture
Instruction Manual CVX Hydro-Plug Fixture Fisher CVX Hydro Plug Fixture Contents Introduction... 1 Scope of Manual... 1 Description... 1 Educational Services... 2 Principle of Operation... 2 Maintenance...
More informationFisher 657 Diaphragm Actuator Sizes and 87
Instruction Manual 657 Actuator (30-70 and 87) Fisher 657 Diaphragm Actuator Sizes 30 70 and 87 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Installation... 3 Mounting
More informationFisher D4 Control Valve Assembly
Fisher D4 Control Valve Assembly Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Educational Services... 2 Installation... 4 Spring Adjustment... 5 Maintenance... 6
More informationBaumann Corrosion Resistant Control Valve
Product Bulletin D103337X012 Baumann 26000 Corrosion Resistant Control Valve The Baumann 26000 (figures 1 and 2) is a unique corrosion resistant control valve featuring a flangeless wafer valve body and
More informationFisher SS-263 Volume Booster
Instruction Manual SS-263 Volume Booster Fisher SS-263 Volume Booster Contents Figure 1. Fisher SS-263 Volume Booster Introduction... 1 Scope of Manual... 1 Description... 1 Educational Services... 2 Specifications...
More informationWARNING. Mounting Instructions D103778X012 June 2013
Mounting Instructions D08X0 June 0 Use these instructions to mount a Fisher FIELDVUE DVC00 digital valve controller mounting kit for Universal (side mounting), sliding stem applications. WARNING Avoid
More informationWARNING. Mounting Instructions D103998X012 June DVC6200/DVC2000 Digital Valve Controller Linear Actuator Side Mount
Mounting Instructions Use these instructions to mount a FIELDVUE DVC6200/DVC2000 to a Linear Side Mount Actuator WARNING Avoid personal injury or property damage from sudden release of process pressure
More informationFisher GX Control Valve and Actuator System
Instruction Manual D103175X012 GX Valve and Actuator Fisher GX Control Valve and Actuator System Contents Introduction............................... 1 Scope of Manual.......................... 1 Description...............................
More informationLOW PRESSURE BALANCED VALVE DIAPHRAGM BALANCED
DIAPHRAGM BALANCED All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to
More informationWARNING. Mounting Instructions D103996X012 May DVC6200/DVC2000 Digital Valve Controller on Linear Actuator
Use these instructions to mount a FIELDVUE to a. WARNING Avoid personal injury or property damage from sudden release of process pressure or bursting of parts. Before performing any maintenance operations:
More informationBaumann Flexsleev Sanitary Control Valve
87000 Valve Product Bulletin Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve is excellent for throttling high purity liquid or gaseous media commonly found in the food and
More informationMETERING VALVE 2" STEM GUIDED
2" STEM GUIDED All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to be construed
More informationFisher GX Control Valve and Actuator System
Instruction Manual GX Valve and Actuator Fisher GX Control Valve and Actuator System Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Educational Services... 2 Valve
More informationFisher 585C Series Piston Actuators
Instruction Manual D102087012 585C Actuator Fisher 585C Series Piston Actuators Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Educational Services... 2 Principle
More informationFisher 685SE and 685SR Piston Actuator
Instruction Manual 685SE/685SR Piston Actuator Fisher 685SE and 685SR Piston Actuator Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Principle of Operation... 3 Installation...
More informationFisher D and DA Valves
Instruction Manual Fisher D and DA Valves Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Educational Services... 2 Ceramic Trim... 3 Installation... 3 Maintenance...
More informationY690A Series Pressure Reducing Regulators
Instruction Manual Form 5463 Y690A Series April 1999 Y690A Series Pressure Reducing Regulators Introduction Scope of Manual This manual provides instructions for installation, startup, maintenance, and
More informationHIGH PRESSURE CONTROL VALVE PISTON BALANCED
PISTON BALANCED All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to be
More informationFisher 1061 Pneumatic Piston Rotary Actuator with Style F & G Mounting Adaptations
Instruction Manual 1061 F & G Actuator Fisher 1061 Pneumatic Piston Rotary Actuator with Style F & G Mounting Adaptations Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications...
More informationHIGH PRESSURE CONTROL VALVE R2L ACTUATOR
R2L ACTUATOR All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to be construed
More informationDesign CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet
Instruction Manual Form 5410 November 1998 Design CP/ENVIRO-SEAL Bellows Seal Design CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet Contents Introduction.............................. 1 Scope of
More informationFisher 657NS Diaphragm Actuators Size 40, 45, 70, and 80
Instruction Manual 657NS Actuator Fisher 657NS Diaphragm Actuators Size 40, 45, 70, and 80 Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 3 Educational Services... 3
More informationFisher 1061 Pneumatic Piston Rotary Actuator with Style H & J Mounting Adaptations
Instruction Manual 1061 H & J Actuator Fisher 1061 Pneumatic Piston Rotary Actuator with Style H & J Mounting Adaptations Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications...
More informationFisherr V150S Slurry Vee-Ball Control Valve NPS 3 through 12
Instruction Manual V150S Slurry Vee-Ball Valve Fisherr V150S Slurry Vee-Ball Control Valve through 12 Contents Introduction... 1 Scope of Manual... 1 Specification table... 2 Description... 2 Installation...
More informationFisher 480 Series Yokeless Piston Actuators
Instruction Manual 480 Series Actuators Fisher 480 Series Yokeless Piston Actuators Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 1 Educational Services... 4 Actuator
More informationJ Flow Controls Model Numbering
4665 Interstate Dr Cincinnati, OH 45246 Phone 513-731-2900 Fax 513-731-6939 3500 Series Valve Instruction and Maintenance Manual Caution: Prior to performing any repairs or maintenance on the valve assembly,
More informationDVG/AF Variable Geometry Desuperheater
Instruction Manual D101616X012 DVG/AF Desuperheater DVG/AF Variable Geometry Desuperheater Contents Introduction............................... 1 Scope of Manual.......................... 1 Description...............................
More informationType 1089 Valve Valve
Instruction Manual 1089 Valve Type 1089 Valve Contents Introduction............................... 1 Scope of manual......................... 1 Description.............................. 2 Specifications............................
More informationType 657 Diaphragm Actuator Sizes and 87
Instruction Manual Form 1900 January 2000 Type 657-70 & 87 Type 657 Diaphragm Actuator Sizes 30-70 and 87 Contents Introduction............................... 1 Scope of Manual.............................
More informationFisher 1052 Size 70 Diaphragm Rotary Actuator
Instruction Manual 1052 Size 70 Actuators Fisher 1052 Size 70 Diaphragm Rotary Actuator Contents Introduction... 1 Scope of Manual... 1 Description... 3 Specifications... 3 Educational Services... 3 Installation...
More informationFisher VBL Volume Booster
Instruction Manual VBL Volume Booster Fisher VBL Volume Booster Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Educational Services... 2 Installation... 4 Mounting...
More informationY690A Series Pressure Reducing Regulators
Instruction Manual Form 5463 Y690A Series February 2009 Y690A Series Pressure Reducing Regulators! Warning Fisher regulators must be installed, operated, and maintained in accordance with federal, state,
More informationFisherr D4 Control Valve Assembly
Instruction Manual D4 Valve Fisherr D4 Control Valve Assembly Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Installation... 4 Spring Adjustment... 5 Maintenance...
More informationFisher DSV High Performance Digester Switching Valve
Instruction Manual D101871X012 DSV Valve Fisher DSV High Performance Digester Switching Valve Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 1 Installation... 3 Maintenance...
More informationModel DFR 026 Rotary Actuator
Figure DFR 026 and 57 Control Valve TABLE OF CONTENTS General 2 Actuator Assembly 4 Scope 2 Bushing Installation 4 Principles of Operation 2 Mounting Yoke / Hub Assembly 4 Safety Caution 2 Spring / Adjuster
More informationConnectors for Diagnostic Testing with the FlowScanner Valve Diagnostic System
Instruction Manual Connectors for FlowScanner System Connectors for Diagnostic Testing with the FlowScanner Valve Diagnostic System Contents Introduction............................... 1 Scope of Manual.........................
More informationBaumann Sanitary Angle Control Valve
83000 Valve Product Bulletin Baumann 83000 Sanitary Angle Control Valve The Baumann 83000 sanitary control valve is excellent for the control of high purity fluids or gaseous media. A low-friction-force
More informationModel DFR 070/156/220 Rotary Actuator
Figure 1 DFR 156 TABLE OF CONTENTS General 2 Actuator Assembly 18 Scope 2 Bushing / Yoke Assembly 18 Principles of Operation 2 Spring Barrel Assembly 18 Safety Caution 2 Diaphragm Plate Assembly 20 Specifications
More informationFisher 667NS Diaphragm Actuators Size 40, 45, 70, and 80
Instruction Manual 667NS Actuator Fisher 667NS Diaphragm Actuators Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 3 Educational Services... 3 Maximum Pressure Limitations...
More informationBaumann Series Sanitary Regulators
Bulletin 84000 Series Regulators Baumann 84000 Series Sanitary Regulators Pressure regulation for your sanitary process. The Baumann 84000 series of sanitary regulators are designed specifically for those
More informationFisher 377 Trip Valve
Instruction Manual Fisher 377 Trip Valve Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 3 Educational Services... 3 Installation... 4 Supply Pressure Requirements...
More informationBaumann 24000S Stainless Steel Control Valve
24000S Valve Product Bulletin Baumann 24000S Stainless Steel Control Valve The Baumann 24000S versatile, pneumatic, control valve may be used for the control of pressure, temperature, level, and flow.
More informationFisher V250 Ball Valve
Instruction Manual Fisher V250 Ball Valve Contents Introduction... 1 Scope of Manual... 1 Description... 1 Installation... 3 Maintenance... 6 Replacing the Follower Shaft Seal... 6 Replacing the Drive
More informationFisher ENVIRO SEAL Packing System for Rotary Valves
D0X0 July 07 Fisher ENVIRO SEAL Packing System for Rotary Valves Contents Introduction... Scope of Manual... Valve/Actuator Shaft Coupler... Description... Installation... Removing the Actuator... Installing
More informationPRESSURE REGULATOR BACK PRESSURE TO ATMOSPHERE WITH OUTSIDE SUPPLY
PRESSURE REGULATOR BACK PRESSURE TO ATMOSPHERE WITH OUTSIDE SUPPLY All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been
More informationFisher 2625 and 2625NS Volume Boosters
Instruction Manual 2625 and 2625NS Volume Booster Fisher 2625 and 2625NS Volume Boosters Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 3 Educational Services... 3 Installation...
More informationModel DF2000 Control Valve
Figure 1 DF2000 Control Valve & DFC Actuator TABLE OF CONTENTS Introduction 2 Jam Style Packing - Figure 2 9 General 2 Body Reassembly 7 Scope 2 Seat Ring Installation 7 Specifications 3 Packing Box 7
More informationPressure Relief Valve Maintenance Manual
Technical Manual 1098T Pressure Relief Valve Maintenance Manual Farris Engineering Division of Curtiss-Wright Flow Control Corporation TABLE OF CONTENTS - Manual Revision 0 Introduction & Safety Tips...
More information490 Series Actuators. 490 Series. Contents. Introduction
Instruction Manual Form 049 May 1992 490 Series 490 Series Actuators Contents Introduction.............................. 1 Scope of Manual............................. 1 Description..................................
More informationDesign EUD, EUT-2, EWD, and EWT-2 Valves
Instruction Manual EUD, EUT-2, EWD, and EWT-2 Valves Design EUD, EUT-2, EWD, and EWT-2 Valves Contents Introduction............................... 1 Scope of Manual.......................... 1 Description...............................
More informationTypes 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators
Instruction Manual Form 5116 Types 1808 and 1808A July 2010 Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators! Warning Failure to follow these instructions or to properly install
More informationFisher 1051 and 1052 Style H and J Sizes 40, 60 and 70 Rotary Actuators
Instruction Manual 1051 and 1052 H & J Actuators Fisher 1051 and 1052 Style H and J Sizes 40, 60 and 70 Rotary Actuators Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications...
More informationANDERSON GREENWOOD SERIES 500 PILOT OPERATED SAFETY RELIEF VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS
Before installation these instructions must be fully read and understood TABLE OF CONTENTS 1. General valve description and start-up... 1 2. Main valve maintenance... 1 3. Pilot maintenance... 5 4. Pilot
More informationFisher 249 Caged Displacer Sensors
Instruction Manual 249 Caged Sensors Fisher 249 Caged Displacer Sensors Contents Introduction... 1 Scope of Manual... 1... 2 Type Number... 3 Educational Services... 4 Maintenance... 4 Cleaning the Cage...
More informationType 289P Pilot-Operated Relief Valve
Instruction Manual D102680X012 Type 289P July 2017 Type 289P Pilot-Operated Relief Valve Figure 1. 1 NPT Type 289P Pilot-Operated Relief Valve Figure 2. 2 NPT Type 289P Pilot-Operated Relief Valve Introduction
More informationI & M 8000 Series. Ideal Installation Schematic. Preferred Installation. Trouble Shooting
I & M 8000 Series 3170 Wasson Road Cincinnati, OH 45209 USA Phone 513-533-5600 Fax 513-871-0105 lowflow@richardsind.com www.lowflowvalve.com Installation & Maintenance Instructions for 8000 Series Low
More informationtype 122a three-way Switching Valve
Instruction Manual Form 2279 Type 122A January 2016 type 122a three-way Switching Valve! WarnIng Failure to follow these instructions or to properly install and maintain this equipment could result in
More informationBaumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
24000CVF and 24000SVF Valves Product Bulletin Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the
More informationI & M Mark 78 Series. Ideal Installation. Start-Up. Installation & Maintenance Instructions for Mark 78 Control Valves (1-1/2-2 )
I & M Mark 8 Series 0 Wasson Road Cincinnati, OH 4509 USA Phone 5-5-5600 Fax 5-8-005 info@richardsind.com www.jordanvalve.com Installation & Maintenance Instructions for Mark 8 Control Valves (-/ - ) Warning:
More informationFisher CHP Control Valve
Instruction Manual D103463X012 CHP Valve Fisher CHP Control Valve Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 1 Installation... 2 Maintenance... 3 Packing Maintenance...
More informationKimray reserves the right to modify or improve the designs or specifications of such products at any time without prior notice Kimray Inc.
TREATER VALVE All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to be construed
More informationI & M Mark 78 Series. Ideal Installation. Start-Up. Installation & Maintenance Instructions for Mark 78 Control Valves (1/2-1 )
I & M Mark 8 Series 30 Wasson Road Cincinnati, OH 4509 USA Phone 53-533-5600 Fax 53-8-005 info@richardsind.com www.jordanvalve.com Installation & Maintenance Instructions for Mark 8 Control Valves (/ -
More informationAnderson Greenwood Series 400 Piston Pilot POPRV Installation and Maintenance Instructions
Before installation these instructions must be fully read and understood As capacity relief of the system is satisfied, system pressure will begin to decrease. When it does, the pilot will actuate and
More informationFisher EZ easy e Control Valve
Instruction Manual EZ Valve Fisher EZ easy e Control Valve Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Educational Services... 2 Installation... 2 Maintenance...
More informationType 1051 and 1052 Size 33 Diaphragm Rotary Actuator
Instruction Manual Type 1051 and 1052 Size 33 Diaphragm Rotary Actuator 1051 & 1052 Actuator Contents Introduction............................. 1 Scope of Manual........................... 1 Description................................
More informationAnderson Greenwood Series 800 POSRV Installation and Maintenance Instructions
Before installation these instructions must be fully read and understood Table of contents 1. General valve description and start-up... 1 2. Main valve maintenance... 2 3. Pilot maintenance... 6 4. Pilot
More informationZero Point Calibration HART Communicating Fisher FIELDVUE DVC6200 Digital Valve Controllers
Zero Point Calibration HART Communicating Fisher FIELDVUE s The Zero Point Calibration procedure allows you replace an existing DVC6200 digital valve controller without performing a travel calibration.
More informationType 1035/El-O-Matic Rack-and-Pinion Rotary Actuator
Instruction Manual 1035/El-O-Matic Actuator Type 1035/El-O-Matic Rack-and-Pinion Rotary Actuator Contents Introduction............................... 1 Scope of Manual......................... 1 Description..............................
More informationFisher 2625, 2625SST, and 2625NS Volume Boosters
Instruction Manual 2625, 2625SST, and 2625NS Volume Booster Fisher 2625, 2625SST, and 2625NS Volume Boosters Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Educational
More informationONYX VALVE CO MODEL DAO-PFC Installation & Maintenance
ONYX VALVE CO MODEL DAO-PFC Installation & Maintenance OPERATION: (4-2010) The Onyx DAO-PFC pinch valve is an open frame valve without housing enclosure and fails closed on loss of air. The actuator drives
More informationFisher ED and EAD easy e Valves CL125 through CL600
Instruction Manual ED Valve Fisher ED and EAD easy e Valves CL25 through CL600 Contents Introduction... Scope of Manual... Description... 2 Specifications... 3 Installation... 3 Maintenance... 4 Packing
More information