LKH Centrifugal Pump ) ) ( (
|
|
- Willa Lambert
- 6 years ago
- Views:
Transcription
1 D L entrifugal ump pplication he L pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical resistance. L is available in twelve sizes, L-5, -10, -15, -20, -25, -35, -40, -45, -50, -60, -70 and -80. tandard design he L pump consists of a standard motor, stub shaft, mechanical compression coupling (L-5 with pin bolts), adaptor, back plate, impeller, pump casing and shaft seal. (L-5 has clamp connection between pump casing and back plate). he L pump is designed for I with emphasis on large internal roundings and cleanable seals. he sanitary version of L has a stainless steel shroud for protection of the motor, and the complete unit is supported on four adjustable stainless steel legs. he industrial version of L has no shroud. haft seals he L pump is equipped with either an external single or a flushed shaft seal. oth have stationary seal rings in acid-resistant steel II 329 with sealing surface in silicon carbide and rotating seal rings in carbon. he secondary seal of the flushed seal is a long lasting lip seal. he pump may also be equipped with a double mechanical shaft seal. Materials roduct wetted steel parts: cid-resistant steel II 316L. Other steel parts: tainless steel II 304. inish: emi bright. roduct wetted seals: DM rubber. echnical data Max. inlet pressure: L-5: 600ka (6 bar) L-10-80: 1000 ka (10 bar). emperature range: to (DM). oise level (at 1 m): d (). lushed shaft seal (L-5 to L-80): Water pressure inlet: max. 1 bar. Water consumption: l/min. Double mechanical shaft seal: Water pressure inlet, L-5 to -60: Max. 500 ka (5 bar). Water pressure inlet, L-70 and -80: Max. 300 ka (3 bar). Water consumption: l/min. ig. 1. L-10 with shroud and legs. onnections for and DM: 1/8" () external thread. Motor oot-flanged motor according to the I metric standard, 2 poles = 3000/3600 rpm. at 50/60 z, I 55 (with drain hole with labyrinth plug), insulation class. Voltage and frequency 3 ~, 50 z, V D/ VY 4 kw 3 ~, 60 z, V D/ VY 4.6 kw ( ( 3 ~, 50 z, V D/ VY ³ 5.5 kw 3 ~, 60 z, V D ³ 6.4 kw ) ) Motor sizes 50 z: kw. 60 z: kw.
2 Dimensions (mm) - anitary and Industrial version (900002/3) D I ig. 2. Dimensions -. anitary version. L-5 (anitary) 0.75/1.1 kw 1.5 kw 2.2 kw min max min max Weight (kg) Industrial version. L-5 (Industrial) 0.75/1.1kW 1.5 kw 2.2 kw min max min max ** min max Weight (kg) L-10 (anitary) 1.5 kw 2.2 kw 3 kw 4 kw min max min max Weight (kg) L-10 (Industrial) 1.5 kw 2.2 kw 3 kw 4 kw min max min max ** min max Weight (kg) ** widest dimension (motorflange or casing)
3 Dimensions (mm) - anitary and Industrial version (900002/3) D I ig. 3. Dimensions -. anitary version.. Industrial version. L-15 (anitary) 3 kw 4 kw 5.5 kw min max min max Weight (kg) L-15 (Industrial) 3 kw 4 kw 5.5 kw min max min max ** min max Weight (kg) L-20 (anitary) 1.5 kw 2.2 kw 3 kw 4 kw 5.5/7.5 kw min max min max Weight (kg) L-20 (Industrial) 1.5 kw 2.2 kw 3 kw 4 kw 5.5/7.5 kw min max min max ** min max Weight (kg) ** widest dimension (motorflange or casing)
4 Dimensions (mm) - anitary and Industrial version (900002/3) D I ig. 4. Dimensions -. anitary version. L-25 (anitary) 5.5/7.5 kw 11/15 kw min max min max Weight (kg) /134. Industrial version. L-25 (Industrial) 5.5/7.5 kw 11/15 kw min max min max ** min max Weight (kg) /122 L-35 (anitary) 4 kw 5.5/7.5 kw 11/15 kw min max min max Weight (kg) /134 L-35 (Industrial) 4 kw 5.5/7.5 kw 11/15 kw min max min max ** min max Weight (kg) /122 ** widest dimension (motorflange or casing)
5 Dimensions (mm) - anitary and Industrial version (900002/3) D I ig. 5. Dimensions -. anitary version. L-40 (anitary) 7.5 kw 11/15/18.5 kw 22 kw min max min max Weight (kg) /137/ L-45 (anitary) 4 kw 5.5/7.5 kw 11/15 kw min max min max Weight (kg) /136. Industrial version. L-40 (Industrial) 7.5 kw 11/15/18.5 kw 22 kw min max min max ** min max Weight (kg) /125/ L-45 (Industrial) 4 kw 5.5/7.5 kw 11/15 kw min max min max ** min max Weight (kg) /124 ** widest dimension (motorflange or casing)
6 Dimensions (mm) - anitary and Industrial version (900002/3) D I ig. 6. Dimensions -. anitary version. L-50 (anitary) L-60 (anitary) 5.5/7.5 kw 11/15/18.5 kw 22 kw min max min max Weight (kg) /139/ motor OO-motor 5.5/7.5 kw 11/15/18.5 kw 22 kw 30 kw D " clamp 6" D " clamp 6" min max min max D " clamp 6" Weight (kg) /147/ Industrial version. L-50 (Industrial) 5.5/7.5 kw 11/15/18.5 kw 22 kw min max min max ** min max Weight (kg) /128/ L-60 (Industrial) -motor OO-motor 5.5/7.5 kw 11/15/18.5 kw 22 kw 30 kw min max D D D D min max ** min max D D Weight (kg) /134/ ** widest dimension (motorflange or casing)
7 Dimensions (mm) - anitary and Industrial version (900002/3) D I ig. 7. Dimensions -. anitary version. L-70 (anitary) -motor OO-Motor 18.5 kw 22 kw 30/37/45 kw 55/75 kw /349 4" "clamp/D " "clamp/D min max " "/D min max " "clamp/D / Weight (kg) /381/ /570. Industrial version. L-70 (Industrial) -motor OO-Motor 18.5 kw 22 kw 30/37/45 kw 55/75 kw min /776 max / /349 D D D D min max D D ** D /1168 D /1278 D80 min D100 min D80 max D100 max D D / Weight (kg) /363/ /546 ** widest dimension (motorflange or casing)
8 Dimensions (mm) - anitary and Industrial version (900002/3) D I ig. 8. Dimensions -. anitary version.. Industrial version. L-80 (anitary) -motor OO-Motor 18.5kw 22 kw 30/37/45 kw 55/75 kw / min max min max / Weight (kg) /392/ /581 ** widest dimension (motorflange or casing) L-80 (Industrial) -motor OO-Motor 18.5kw 22 kw 30/37/45 kw 55/75 kw min /776 max / / min max ** /1285 min min / Weight (kg) /374/ /557
9 ig. 8. low chart +Ã )X\ÃÃ+] 6ÃV\ÃÃ Ã ' 7 4Ã onnections (mm) anitary version L-5 D l 51 IO IO DI M D D ll 38 lamp Male Male Male Male Male M l M ll L-10, -20, -35 D l 63.5 IO IO DI M D D ll 51 lamp Male Male Male Male Male M l M ll L-25 D l 76.1 IO IO DI M D D ll 63.5 lamp Male Male Male Male Male M l M ll L-40 D l 76.1 IO IO DI M D D ll 63.5 lamp Male Male Male Male Male M l M ll L-60 D l IO IO DI M D D ll lamp Male Male Male Male Male M l M ll L-60, -70, -80 D l D150 DI D l 6" IO D ll D100 Male D ll 4" lamp M l 50 M l 38 M ll 30 M ll 16 Industrial version Inlet D l Outlet D ll lange accord. to lange accord. to DI2642/4505 DI2642/4505 L-5 W50 W40 L-10, -20, -35 W65 W50 L-25, -40 W80 W65 L-15, -45, -50, -70 W100 W80 L-60 W100 W100 L-60, -70, -80 W150 W100 L-15, -45, -50, -70 D l IO IO DI M D D ll 76.1 lamp Male Male Male Male Male M l M ll
10 Options quipment ) Impeller with reduced diameter. ) Impeller screw/nut (standard for L-70 and -80). ) Motor for other voltage and/or frequency. D) 1500 rpm. motor. ) Motor with increased safety/flame proof motor. ) Inducer (only L-10 to -50). ) lushed shaft seal. ) Double mechanical shaft seal. I) ounter flanges, seal rings and bolts for flanged connections (industrial version). ) Wider clearance between impeller and backplate if there is a risk of buliding up a hard layer of product. tandard clearance is 0.5 mm (1 mm for L-70/80) and can be made up to 2.5 mm). Material grades ) urface roughness, product wetted parts: a 0.8 mm. L) roduct wetted seals of itrile (), luorinated rubber (M) or. M) otating seal ring of ilicon arbide. Ordering lease state the following when ordering: - ump size. - Version, sanitary or industrial. - onnections. - Impeller diameter. - Motor size. - Voltage and frequency. - low, pressure and temperature. - Density and viscosity of the product. - Options. ote! or further details, see also D and IM he information contained herein is correct at the time of issue, but may be subject to change without prior notice. D anitary quipment, eadquarter lfa Laval LD, weden elephone: ax: mail: sanitary.equipment@alfalaval.com
LKH UltraPure Centrifugal Pump
PD 66322 GB1 2000-08 LKH UltraPure Centrifugal Pump Application The LKH UltraPure pump is a highly efficient and economical centrifugal pump, which meets the requirements of the pharmaceutical industries.
More informationLKH-90 4 poles = 1500/1800 rpm at 50/60 Hz.
. kythe Premium Pump ky LKH Centrifugal Pump Applications The LKH pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical
More informationLKH-904poles = 1500/1800 rpm at 50/60 Hz. Voltage and frequency 3~,50Hz, V / VY 4kW 3~,60Hz, V / VY 4.
. kythe Premium Pump ky Centrifugal Pump Applications The pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical
More informationkythe Compact Pump LKH-110 and LKH-120/P Multi-Stage Centrifugal Pump
. kythe Compact Pump LKH-110 and LKH-120/P Multi-Stage Centrifugal Pump Application LKH-110 and -120/P are highly efficient and economical multistage centrifugal pumps, which meet the requirements of sanitary
More informationkythe Premium Pump LKH Centrifugal Pump
. kythe Premium Pump ky LKH Centrifugal Pump Applications The LKH pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical
More informationkythe Premium Pump LKH Centrifugal Pump
. kythe Premium Pump ky LKH Centrifugal Pump Applications The LKH pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical
More informationkythe Premium Pump for Air and Gas Applications
. kythe Premium Pump for Air and Gas Applications LKHSP Self-priming Centrifugal Pump Application The LKHSP self-priming centrifugal pump is specially designed for pumping liquids containing air or gas
More informationInstruction Manual. SolidC Pump ESE00797-EN Original manual
Instruction Manual SolidC Pump ESE00797-EN3 2010-02 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without prior notice 1. EC Declaration
More informationTri-Clover SP328 Centrifugal Pump
Tri-Clover SP328 Centrifugal Pump Mfg: Tri Clover Stock No. OIP025. Model: SP328ME-00-S Serial No. E3152 Tri-Clover SP328 Centrifugal Pump. Model SP328ME-00-S. S/N E3151. Capacity: up to 380 gpm. Impeller:
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 THERMAL INSULATION DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationInstruction Manual. SolidC UltraPure ESE00680-EN Original manual
Instruction Manual SolidC UltraPure 3009-0004 ESE00680-EN5 2014-09 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without prior notice
More informationInstruction Manual. LKH Centrifugal Pump IM70737-EN
Instruction Manual LKH Centrifugal Pump IM70737-EN11 2008-05 2 Declaration of Conformity The designating company Alfa Laval Company Name Albuen 31, DK-6000 Kolding, Denmark Address +45 79 32 22 00 Phone
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationCENTRIFUGAL PROCESS PUMPS MODEL A100 ANSI B73.1
CENTRIFUGAL PROCESS PUMPS MODEL A ANSI B7.1 Heavy Duty Design Features Permit a Wide Range of Process Services All EAGLE A pumps have 1 lb. raised face flanges as standard except 1" and " casings which
More informationINTERNAL GEAR: STAINLESS STEEL HYGIENIC PUMPS SERIES DESCRIPTION OPERATING RANGE: NOMINAL FLOW RATES: Section 230 Page 230.
INTRNL R: RI 157, 4157, 257, 4257 age 230.1 Issue RI RITION ORTIN RN: iking s Hygienic eries positive displacement pumps are designed to conform to International standards for sanitary processing of foods,
More information- CONTENTS SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 120 203 PERFORMANCE CHART 200 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL
More informationHygienic self-priming GEA Tuchenhagen -VARIFLOW centrifugal pump Series TPS
Hygienic self-priming GEA Tuchenhagen -VARIFLOW centrifugal pump Series TPS Process Equipment GEA Tuchenhagen GEA Tuchenhagen -VARIFLOW Series TPS The hygienic self-priming GEA Tuchenhagen -VARIFLOW TPS
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 1506 203 PERFORMANCE CURVE 2006 203 PERFORMANCE CURVE 3006 203 PERFORMANCE CURVE 4006 203
More informationFigure 15: FPH & FPHP 3542 and FPH 3552 Assembly
18 Figure 15: FPH & FPHP 3542 and FPH 3552 Assembly 1. Impeller Nut 2. Cover Nut 3. Cover Gasket 4. Housing Stud 5. Pump Housing 6. Impeller 7. Impeller Key 8. Rotating Seal o-ring 9. Seal Driver 10. Rotating
More informationVERTICAL MULTISTAGE PUMPS SSV-F Hz
VERTICAL MULTISTAGE PUMPS SSV-F 1-3 - 6-1 - 15 5Hz TABLE OF HYDRAULIC PERFORMANCES AT 5Hz PUMP TYPE RATED POWER H1 Q = DELIVERY l/min 8,3 16,7, 33,3 2 5, 58,3 67 75, m³/h,5 1 1,5 2 2,5 3 3,5,5 kw HP Bar
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationCombiTemp Temperature Measuring System
CombiTemp Temperature Measuring ystem Flexible building block concept All wetted parts in acid-proof, stainless steel ome hygienic connections conform to -A standards, FDA demands and EHEDG guidelines
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 FITTINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 25/08 204 PERFORMANCE CURVE 25/15 205 PERFORMANCE CURVE 25/25 206
More information2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 PERFORMANCE RANGE and SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 150 203 PERFORMANCE CURVE 200 204 PERFORMANCE CURVE 300 205 PERFORMANCE CURVE 400 206 - CONSTRUCTIONS
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
More informationGIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN
GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW) 205 PERFORMANCE CURVE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW)
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING TECHNICAL DATA 500
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE BEST 2 203 PERFORMANCE CURVE BEST 3 203 PERFORMANCE CURVE BEST 4 203 PERFORMANCE CURVE BEST
More information-SPECIFICATIONS Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart
1 4 &(175,)8*$/38036 &217(176 -SPECIFICATIONS Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart 103 -PERFORMANCE CURVES Performance Curve 150 200 Performance
More informationChemical Motor Pump Unit BN
MB / General Pump BN-type motor pump units are normal-priming, singlestage, plastic centrifugal pumps in block design with horizontal axis. Their dimensions and flow rates mainly correspond to DIN/EN.
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
More informationCVM. EBARA PUMPS EUROPE S.p.A. MULTISTAGE CENTRIFUGAL PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 kw) 203 PERFORMANCE CURVE A (FROM 0.75 kw UP TO 1.1 kw) 204 PERFORMANCE CURVE
More informationseal-less Magnetic drive PuMPs
seal-less Magnetic drive Pumps MAXP Magnetic Drive ANSI Process Pumps MP / MPL / MPH ANSI & Sub ANSI Magnatex MAXP Series ANSI process pumps are available in a wide variety of materials to meet demanding
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING TECHNICAL DATA 500
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE BEST 2 203 PERFORMANCE CURVE BEST 3 204 PERFORMANCE CURVE BEST 4 205
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 THERMAL INSULATION 301 MECHANICAL SEAL 302 BEARINGS DIMENSIONS and WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY amd CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS
More informationSÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS
SÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS SÜDMO HYGIENIC CENTRIFUGAL PUMPS Designed for continuous operation on thin liquids (milk, wine, cream, beer, wort, etc.).
More informationCDX CENTRIFUGAL PUMPS EPA
4 CONTENTS V4 - SPECIFICATIONS Page Features & Applications 00 Typical Exploded View 0 Pump & Motor Specifications 02 Selection Chart / Type key 03 - PERFORMANCE CURVES Performance Curve Specifications
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 150 203 PERFORMANCE CURVE 200 204 PERFORMANCE CURVE 300 205 PERFORMANCE
More informationProlac MSHCP. Centrifugal Pump. I Application. I Design and features. I Mechanical seal. I Technical specifications
Prolac MSHCP I Application Due to the choice of aterials and its design, PROLAC HCP is appropriate for applications requiring a high level of hygiene, it offers gentle handling of the product and resistance
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 201 CURVE SPECIFICATIONS 202 PERFORMANCE CHART IDROGO PERFORMANCE CHART IDROGO
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 201 CURVE SPECIFICATIONS 202 PERFORMANCE CHART 40 203 PERFORMANCE CHART 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW 301
More information- CONTENTS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART IDROGO PERFORMANCE CHART IDROGO
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART 40 202 PERFORMANCE CHART 80 203 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW 301 MECHANICAL SEAL 302 DIAGRAM
More informationSÜDMO NEW SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS
SÜDMO SP SERIES - NEW HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS SÜDMO SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD
More informationbar. A) d = 8 mm A) d = 8 mm D) Cleaning Nozzles B) d = 7 mm Nozzles B) d = 7 mm E) Mixing C) d = 6 mm C) d = 6 mm.
IM 15 Rotary Jet Mixer Tank gitators and Mixers Flow rate Relationship between inlet pressure and flow rate for liquids with waterlike properties for the IM 15 Rotary Jet Mixer. Volumetric flow rate [m
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 80 203 PERFORMANCE CURVE 100 204 PERFORMANCE CURVE 120 205 PERFORMANCE CURVE 150 206 - CONSTRUCTIONS
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING TECNICAL DATA 500 MOTOR DATA 500
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 056 203 PERFORMANCE CURVE 066 204 PERFORMANCE CURVE 086 205 - CONSTRUCTIONS 300 SECTIONAL
More informationMMI L STAINLESS STEEL CENTRIFUGAL PUMPS Clean or slightly muddy liquids Corrosive fluids - Acids - Solvents OPERATING RANGES APPLICATIONS
OPERATING RANGES Flow rates of up to: m /h Manometric head of up to: mcl Max. operating pressure: / bar Temperature range: - C to + C DN (nominal diameter) of ports: Male Max. viscosity: cst MMI L STAINLESS
More informationGoulds GIS Series. ISO Frame & Stub Shaft Pumps. Goulds Pumps
Goulds GIS Series ISO Frame & Stub Shaft Pumps Goulds Pumps ISO End Suction Centrifugal Pump - Technical Sales Data The ITT Goulds brand is renowned for manufacturing the highest quality pumping equipment
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
More information- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX DIMENSION TABLE MATRIX PACKING 403
CONTENTS Page - SPECIFICATIONS 200-201 SELECTION CHART 202 SELECTION CHART TABLE 203 TYPE KEY AND CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 3 ( 2-3-4-5 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 6-7-8-9 IMPELLERS
More informationGoulds GIS Series. ISO Frame & Stub Shaft Pumps. Goulds Pumps
Goulds GIS Series ISO Frame & Stub Shaft Pumps Goulds Pumps ISO End Suction Centrifugal Pump - Technical Sales Data The ITT Goulds brand is renowned for manufacturing the highest quality pumping equipment
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE 32-250/9.2
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 BEARINGS 303 THERMAL INSULATION 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 300 203 PERFORMANCE CURVES 500 204 - CONSTRUCTIONS 300 SECTIONAL
More information- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE DWC PERFORMANCE CURVE DWC
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 300 203 PERFORMANCE CURVE 500 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 80 203 PERFORMANCE CURVE 100 204 PERFORMANCE CURVE 120 205 PERFORMANCE
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
More informationSingle Seal Driver O-Ring
Fristam Pumps 0 FM3 (HP3) Assembly Single Rotating Single Stationary Double Stationary Double Rotating Spring Set Screw Single Rotating 265000334 Rev A Driver Drive Ring Double Single Stationary Single
More informationLPCD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 40 204 PERFORMANCE CURVE 50 205 PERFORMANCE CURVE 65 207 PERFORMANCE CURVE 80 208 PERFORMANCE
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 20 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
More informationMatrix_Techdata_SS_V14
Matrix_Techdata_SS_V4 CONTENTS V4 SPECIFICATIONS Page Features & Applications Typical Exploded View Pump & Motor Specifications Selection Chart / Type key 3 Selection Chart 4 PERFORMANCE CURVES Performance
More informationNBE50-250/205 A-F2-A-BAQE
GRUNDFOS DATA BOOKLET NBE5-25/25 A-F2-A-BAQE Grundfos pump 9518635 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nbe/9518635/nbe-5-25-25-a-f2-a-e-baqe.html
More informationSMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm
PD 6544 GB1 9911 SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm Application SMP-BCA is an aseptic double seat valve with PTFE diaphragm. It is available as a stop- or divert valve. The valve is suited
More informationABS submersible sewage pump AFP
BS submersible sewage pump FP - Robust, reliable submersible pumps from. to kw for pumping wastewater and sewage from buildings and sites in private, commercial, industrial and municipal areas in accordance
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
More informationC-Series CENTRIFUGAL PUMPS. Featuring Sealed Impeller Design!
C-Series CENTRIFUGAL PUMPS Featuring Sealed Impeller Design! Versatile Waukesha C Series Centrifugal Pumps from Waukesha Cherry-Burrell find broad application throughout sanitary and industrial processes.
More informationInstruction Manual. LKH Centrifugal Pump ESE00698-EN Original manual
Instruction Manual LKH Centrifugal Pump 3000-0059 ESE00698-EN21 2017-05 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without prior
More informationTechnical Data BEST 2~5. Stainless Steel Submersible Sump Pumps EBARA PUMPS AUSTRALIA PTY. LTD. Best 2-5_Techdata_SS_V10
Technical Data BEST 2~5 Stainless Steel Submersible Sump Pumps EBARA PUMPS AUSTRALIA PTY. LTD. Best 2-5_Techdata_SS_ CONTENTS -SPECIFICATIONS Page Features & Applications 100 Exploded View 101 Pump & Motor
More informationNB /193 A-F2-A-BAQE
GRUNDFOS DATA BOOKLET NB100-200/193 A-F2-A-BAQE Grundfos Pump 98305367 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nb000/98305367/nb-100-200-193-a-f2-a-e-baqe.html
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 LPC4 32 205 LPC4 40 206 LPC4 50 211 LPC4 65 215 LPC4 80 219 LPC4 100 222 LPC4 125 225 LPC4 150 226 - CONSTRUCTIONS
More informationInstruction Manual. LKH Centrifugal Pump ESE00698-EN Original manual
Instruction Manual LKH Centrifugal Pump 3000-0059 ESE00698-EN14 2012-10 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without prior
More informationFixed Displacement Pump A2FO
RE 91401/01.97 Brueninghaus Hydromatik eries 6, for open circuits Axial tapered piston - bent axis design izes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91401/01.97 replaces 11.95
More informationVulcan Parallel Spring O -Ring Mounted Seals. Section
Vulcan arallel pring O -Ring Mounted eals 64 ection NRODCON he Vulcan ype 95 to 98 eries (referred to below as the ype 9x range) mechanical seals are robust, general purpose, parallel spring, seals, to
More information(%$5$ PUMPS EUROPE S.p.A. &(175,)8*$/38036':2. &217(176 50Hz
&(175,)8*$/38036':2 &217(176 50Hz Page 63(&,),&$7,216 200 SELECTION CHART 201 PERFORMANCE CHART 150 202 PERFORMANCE CHART 200 203 PERFORMANCE CHART 300 204 PERFORMANCE CHART 400 205 &216758&7,216 300 SECTIONAL
More informationSelf-priming Centrifugal Pumps ACL
Self-priming Centrifugal Pumps ACL Description Series ACL, ACLD and ACLDR pumps are horizontal, self-priming segmental-type side-channel pumps. They are manufactured single and multiple staged. In type
More informationSCHMITT. product information. Kreiselpumpen. U Pump Series. normal priming, centrifugal pumps with a single mechanical seal.
SCHMITT Kreiselpumpen chemical resistant pumps for corrosive and highly pure media product information U Pump Series normal priming, centrifugal pumps with a single mechanical seal materials: PVDF Description
More informationfranklinwater.eu 50 HZ EH - EHsp SERIES HORIZONTAL MULTISTAGE AND SELF-PRIMING PUMPS
franklinwater.eu 5 HZ EH - EHsp SERIES HORIZONTAL MULTISTAGE AND SELF-PRIMING PUMPS INDEX Stainless Steel Horizontal Multistage (EH) and Self-Priming (EHsp) Pumps 2 Family curves 3 Pump identification
More informationSNM / SNM-V. Close - Coupled Centrifugal Pumps ATEX SNM EN
EN ISO 9905 SN / SNV Close Coupled Centrifugal umps ATEX SN 00 1111 EN General Information SN / SNV Liquids Handled SN / SNV type pumps are suitable for nonaggresive, clean or slightly contaminated liquids
More informationSubmersible Stainless Steel Semi-Vortex Pumps Pumps
Technical Data Right Submersible Stainless Steel Semi-Vortex Pumps Pumps EBARA PUMPS AUSTRALIA PTY. LTD. DWVOX_Techdata_SS_ Right_Techdata_DS_ CONTENTS -SPECIFICATIONS Page Features & Applications 100
More informationWTX. Complete Stainless Steel Monoblock Process Pumps
Complete Stainless Steel Monoblock Process Pumps FEATURES, stainless steel, horizontal shaft, non-self-priming, single stage centrifugal volute pumps are made by advanced techniques such as pressing welding
More informationWater cooled condensers. Shell and tube condensers for fresh and sea water applications
Water cooled condensers Shell and tube condensers for fresh and sea water applications Water cooled condensers 4 5 6 7 8 9 10 11 12 13 14-15 16 17 18 19 20 21 22 23 The widest range world of applications
More informationFor the right ball valve
A or the right ball valve usinesses from food and beverage to pharmaceutical and cosmetics have trusted radford sanitary ball valves for many years. he reason: ixon anitary has the quality valves they
More informationNB /263 AS-F2-A-BAQE
GRUNDFOS DATA BOOKLET NB125-25/263 AS-F2-A-BAQE Grundfos pump 9832195 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nb/9832195/nb-125-25-263-as-f2-a-e-baqe.html
More informationZS Stainless steel horizontal single stage centrifugal pump
ZS Series PRESENTATION Hydroo Pump Industries SL is an enterprise specialised in the research, development and large-scale production of Stainless Steel centrifugal pumps. We have a vertical integration
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE RIGHT PERFORMANCE CURVE RIGHT
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 75 204 PERFORMANCE CURVE 100 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 BEARINGS 301 MECHANICAL
More informationEuro-HYGIA. Euro-HYGIA s. Construction. Technical data. Applications. Materials. Sanitary pumps 50 Hz. Euro-HYGIA I and II. Food and beverage industry
Euro-HYGIA Euro-HYGIA s Construction Euro-HYGIA pumps are single-stage, end-suction centrifugal pumps designed to meet the hygienic requirements of sterile process technology. The pumps are CIP and SIP
More informationMMD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
More informationNB /438 A-F1-A-GQQE
GRUNDFOS DATA BOOKLET NB15-4/438 A-F1-A-GQQE Grundfos pump 983626 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nb/983626/nb-15-4-438-a-f1-a-e-gqqe.html
More informationTP /2-A-F-A-BAQE 400D 50HZ
GRUNDFOS DATA BOOKLET TP 32-38/2-A-F-A-BAQE 4D 5HZ Grundfos Pump 968677 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/968677/tp-32-38-2-a-f-a-baqe.html
More informationTP /4-A-F-A-BQQE 400Y 50HZ
GRUNDFOS DATA BOOKLET TP 4-1/4-A-F-A-BQQE 4Y 5HZ Grundfos Pump 9686883 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/9686883/tp-4-1-4-a-f-a-bqqe.html
More informationNK /310A2F1AE-SBAQE
GRUNDFOS DATA BOOKLET NK15-315/31A2F1AE-SBAQE Grundfos Pump 98318632 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nkbasis/98318632/nk-15-315-31-a2-f-a-e-baqe.html
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 80 203 PERFORMANCE CURVE 100 204 PERFORMANCE CURVE 120 205 PERFORMANCE CURVE 150 206 - CONSTRUCTIONS
More informationMMD 4 Poles. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE MMD4 32-250 205 PERFORMANCE CURVE MMD4 40-250 206 PERFORMANCE CURVE MMD4 50-250 207 PERFORMANCE
More informationInstruction Manual. LKH Evap ESE01861-EN Original manual
Instruction Manual LKH Evap 3000-0059 ESE01861-EN5 2017-09 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without prior notice 1.
More informationInstruction Manual. LKHex UltraPure Centrifugal Pump EN Original manual
Instruction Manual LKHex UltraPure Centrifugal Pump 3001-0064 100000157-EN1 2018-02 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change
More informationEbara Submersible Sewage Pumps (Single Channel Impeller)
Ebara Submersible Sewage Pumps (Single Channel Impeller) Features and Applications Model DML 50Hz + Features! Non-clog single channel impeller Non-clog single channel impeller has 3 spherical passage and
More information