Air Fittings Quick Disconnect Couplings, Perfecting N (MacDonald), P Series and Lubricators. U.S. Air King and Clamps

Transcription

1 A Air Fittings Quick Disconnect Couplings, Perfecting N (MacDonald), P Series and Lubricators pages 1-4 U.S. Air King and Clamps pages 5-7 European Compressor Couplings and Clamps page 8 King Cable Safety Device page 9 Telephone: +44 (0)

2 Perfecting Quick Acting Couplings - N Series Interchanges with Adlock, Bowes and MacDonald Couplings Sizes: 3/8 to 1 1 /4. Materials: Pressure (All sizes): Carbon Steel - Gold Chromate Plated, Brass, Stainless Steel (Upon request). Maximum working pressure: 600 p.s.i. - Water Maximum working pressure: 300 p.s.i. - Air **Please note 1 1 /4 Adlock parts come standard with 1 threads** MALE END x HOSE END N4CS3 3 /8 Steel N4CS4 1 /2 Steel N4CS6 3 /4 Steel N4CS8 1 Steel N8CS /4 Steel N4CS3-B 3 /8 Brass N4CS4-B 1 /2 Brass N4CS6-B 3 /4 Brass N4CS8-B 1 Brass N4CS10-B 1 1 /4 Brass P.O.A. FEMALE END x HOSE END 4NCS3 3 /8 Steel NCS4 1 /2 Steel NCS6 3 /4 Steel NCS8 1 Steel NCS /4 Steel NCS3-B 3 /8 Brass NCS4-B 1 /2 Brass NCS6-B 3 /4 Brass NCS8-B 1 Brass NCS10-B 1 1 /4 Brass MALE END x BSP Pl. FEMALE N4BF3 3 /8 Steel N4BF4 1 /2 Steel N4BF6 3 /4 Steel N4BF8 1 Steel N8BF /4 Steel P.O.A. N4BF3-B 3 /8 Brass N4BF4-B 1 /2 Brass N4BF6-B 3 /4 Brass N4BF8-B 1 Brass N4BF10-B 1 1 /4 Brass P.O.A. MALE END x NPT FEMALE N4F3 3 /8 Steel N4F4 1 /2 Steel N4F6 3 /4 Steel N4F8 1 Steel N4F /4 Steel P.O.A. N4F3-B 3 /8 Brass N4F4-B 1 /2 Brass N4F6-B 3 /4 Brass N4F8-B 1 Brass N4F10-B 1 1 /4 Brass P.O.A. 1 Telephone: +44 (0)

3 MALE HEAD X BSPT MALE END N4BM3 3 /8 Steel N4BM4 1 /2 Steel N4BM6 3 /4 Steel N4BM8 1 Steel N8BM /4 Steel P.O.A. N4BM3-B 3 /8 Brass N4BM4-B 1 /2 Brass N4BM6-B 3 /4 Brass N4BM8-B 1 Brass N4BM10-B 1 1 /4 Brass P.O.A. MALE HEAD X NPT MALE END N4M3 3 /8 Steel N4M4 1 /2 Steel N4M6 3 /4 Steel N4M8 1 Steel N4M /4 Steel P.O.A. N4M3-B 3 /8 Brass N4M4-B 1 /2 Brass N4M6-B 3 /4 Brass N4M8-B 1 Brass N4M10-B 1 1 /4 Brass P.O.A. FEMALE HEAD X BSPT MALE END 4NBM3 3 /8 Steel NBM4 1 /2 Steel NBM6 3 /4 Steel NBM8 1 Steel NBM /4 Steel P.O.A. 4NBM3-B 3 /8 Brass NBM4-B 1 /2 Brass NBM6-B 3 /4 Brass NBM8-B 1 Brass NBM10-B 1 1 /4 Brass P.O.A. FEMALE HEAD X NPT MALE END 4NM3 3 /8 Steel NM4 1 /2 Steel NM6 3 /4 Steel NM8 1 Steel NM /4 Steel P.O.A. 4NM3-B 3 /8 Brass NM4-B 1 /2 Brass NM6-B 3 /4 Brass NM8-B 1 Brass NM10-B 1 1 /4 Brass P.O.A. FEMALE HEAD X BSP PL. FEMALE END 4NBF3 3 /8 Steel NBF4 1 /2 Steel NBF6 3 /4 Steel NBF8 1 Steel NBF /4 Steel P.O.A. 4NBF3-B 3 /8 Brass NBF4-B 1 /2 Brass NBF6-B 3 /4 Brass NBF8-B 1 Brass NBF10-B 1 1 /4 Brass P.O.A. FEMALE HEAD X NPT FEMALE END 4NF3 3 /8 Steel NF4 1 /2 Steel NF6 3 /4 Steel NF8 1 Steel NF /4 Steel P.O.A. 4NF3-B 3 /8 Brass NF4-B 1 /2 Brass NF6-B 3 /4 Brass NF8-B 1 Brass NF10-B 1 1 /4 Brass P.O.A. MINI ADLOCK MALE HOSE TAIL N3CS4 1 /2 Steel MINI ADLOCK FEMALE HOSE TAIL 3NCS4 1 /2 Steel ADLOCK GASKET QBM2 SEAL TO FIT SIZES 3 /8, 1 /2, 3 /4 and Telephone: +44 (0)

4 Perfecting Quick Acting Couplings - P Series Interchanges with National A Type and Thor PHC Series Couplings, Dixon Dual Lock. Sizes: Materials: Pressure: Details: 3/8 to 1 NPT Threads. Carbon Steel, Chromate Plated. Rated to 300 p.s.i. Dual Lock air couplings designed for use with pneumatic air tool's: Spring loaded interlocking engagement Full opening permits full line pressure to tool PM and PF series to be used with mating locking sleeve fittings PIPE THREAD MALE P4M3 3 / P4M4 1 / P4M6 3 / P4M PIPE THREAD FEMALE P4F3 3 / P4F4 1 / P4F6 3 / P4F HOSE END BARB WITH LOCKING SLEEVE 4PCS3 3 / PCS4 1 / PCS6 3 / PCS PIPE THREAD MALE WITH LOCKING SLEEVE 4PM3 3 / PM4 1 / PM6 3 / Telephone: +44 (0)

5 PIPE THREAD FEMALE WITH LOCKING SLEEVE 4PF4 1/2 4PF6 3 / REPLACEMENT GASKET PART NO. PRICE LOCKING KEY PART NO. PRICE DUAL-LOCK QUICK-ACTING COUPLINGS WITH FERRULES PART N.O. SIZE O.D. RANGE (mm) PRICE FROM: TO: PHL8WF 1 / PHL12WF 3 / IN-LINE LUBRICATORS PART NO. NPT OIL MAX WORKING AIR FLOW PRICE CAPACITY PRESSURE AT 70 P.S.I. PL300 1 /2 1.4 Fluid ozs 500 p.s.i.g. 30 s.c.f.m PL400 3 /4 3.7 Fluid ozs 200 p.s.i.g. 70 s.c.f.m PL400L 3 / Fluid ozs 300 p.s.i.g. 70 s.c.f.m PL Fluid ozs 250 p.s.i.g. 100 s.c.f.m Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms. Each time an air tool is operated, a fine mist of oils is injected into it along with the air from the compressor. Installation is recommended within 25 feet of the tool to be lubricated. Transparent sight disc allows visual inspection of oil level. Oil flow regulated by screwdriver screw adjustment. Not recommended for constant flow applications. Type of oil to use: Use any petroleum-base, non-detergent lightweight oil (SAE 10/150SSU) which will readily break up into a mist, i.e. MOBIL DTE light or comparable oil. Do not use any synthetic oil or oils containing additives or solvents. Telephone: +44 (0)

6 Air King Universal Couplings AIR HOSE COUPLINGS This form of energy can be one of the most dangerous because it is used in so many applications and, when mishandled, can have more serious results than fluids. Air, as a gas, is compressible (fluids press only against hose or vessel walls and lose little volume under pressure). When pressurised air releases suddenly, it does so with explosive force and can cause rapid hose whip, which can do serious physical harm to personnel or damage to nearby objects. This is why the selection of proper hose and couplings for air-lines is so important, along with their proper installation and maintenance. Never take for granted that a coupling is installed properly or a clamp fully tightened on an air hose check it regularly and use safety devices (see King Cable Hose Restraint Section). Air King universal couplings can be recommended for 10 bar (150psi) working pressure at ambient temperature (21 C / 70 F). It is recommended that an Air King safety clip or wire retainer is used to avoid accidental disconnection. Also a King cable should be standard practice on the supply end of the hose. Boss or Air King interlocking type bolt clamps should be used and both components of an Air King assembly should be Dixon products standard Air King fittings are fitted with AWR4 washers. Air King is also available to meet MIL spec. WWC-633D. 4-lug King quick-acting couplings may only be used in conjunction with an Air King Safety Clip. Note: Air King is for Air and Water service only. NEVER use any AIR KING for STEAM SERVICE. HOSE END AMH 3 /8 Malleable Iron 6.41 AM1 1 /2 Malleable Iron 4.10 AM5 5 /8 Malleable Iron 5.72 AM6 3 /4 Malleable Iron 3.99 AM11 1 Malleable Iron 5.55 ABH 3 /8 Brass AB1 1 /2 Brass 9.42 AB5 5 /8 Brass 9.65 AB6 3 /4 Brass AB11 1 Brass RAM1 1 /2 316 Stainless Steel RAM6 3 /4 316 Stainless Steel RAM Stainless Steel MALE NPT END AMB1 1 /4 Malleable Iron 6.35 AMB 3 /8 Malleable Iron 4.91 AM2 1 /2 Malleable Iron 4.33 AM7 3 /4 Malleable Iron 4.62 AM12 1 Malleable Iron 5.37 ABB1 1 /4 Brass ABB 3 /8 Brass AB2 1 /2 Brass AB7 3 /4 Brass AB12 1 Brass RAM2 1 /2 316 Stainless Steel RAM7 3 /4 316 Stainless Steel RAM Stainless Steel Telephone: +44 (0)

7 FEMALE NPT END AMC1 1 /4 Malleable Iron 5.83 AMC 3 /8 Malleable Iron 5.43 AM3 1 /2 Malleable Iron 4.27 AM8 3 /4 Malleable Iron 4.39 AM13 1 Malleable Iron 5.60 ABC1 1 /4 Brass ABC 3 /8 Brass AB3 1 /2 Brass AB8 3 /4 Brass AB13 1 Brass RAM3 1 /2 316 Stainless Steel RAM8 3 /4 316 Stainless Steel RAM Stainless Steel AIR KING BLANK CAP PART NO. MATERIAL PRICE AM0 Malleable Iron 6.87 AB0 Brass RAM0 316 Stainless Steel AIR KING TRIPLE CONNECTOR PART NO. MATERIAL PRICE AM10 Malleable Iron AB10 Brass AIR KING UNIVERSAL SWIVELS AM2SWIV 1 /2 Male NPT AM6SWIV 3 /4 Hose End AM7SWIV 3 /4 Male NPT AM8SWIV 3 /4 Female NPT SAFETY CLIPS SAFETY CLIPS AC1 (In bags of 25) 0.12 ea Same size for all coupling sizes SAFETY CLIPS STAINLESS STEEL CLIPS AC7 Same size for all coupling sizes 1.08 Telephone: +44 (0)

8 LANYARDS LR7 Stainless Steel 2.67 ACL8 Synthetic Cord (In bags of 25) 0.17ea Same size for all coupling sizes AIR KING CLAMPS PART NO. SIZE FROM - TO TORQUE (FT.LBS) PRICE CD 3 / A4 1 / A9 3 / A10* A Torque values for clamps are based on Dry Bolts. The use of lubricant on bolts will adversely effect clamp performance. *Can be used with AM6 and AM11 Couplings. AIR KING WITH FERRULES PART NO. SIZE OD.RANGE MATERIAL PRICE AM1WF 1 / Malleable Iron 6.12 AM6WF 3 / Malleable Iron 5.83 AM11WF Malleable Iron 8.44 AM11WF Malleable Iron 7.97 RAM6WF 3 / Stainless Steel KING 4 LUG QUICK-ACTING HOSE END COUPLINGS AM /4 Malleable Iron AM /2 Malleable Iron AM26 2 Malleable Iron AB /4 Brass AB /2 Brass AB26 2 Brass Must be used in conjunction with an Air King safety clip. KING QUICK-ACTING FEMALE NPT END COUPLINGS AM /4 Malleable Iron AM /2 Malleable Iron AM28 2 Malleable Iron AB /4 Brass AB /2 Brass AB28 2 Brass WASHERS for 4-LUG WASHERS for 2-LUG PART NO. PRICE AWR Fits All Sizes EAWR4* Black Natural Rubber 0.29 AWS6* Neoprene 0.50 *Sold only in bags of Telephone: +44 (0)

9 European Compressor Couplings and Clamps. Sizes: 3/8 to 1 (DN10 to DN25). Material: Ductile Iron, Malleable Iron, Investment Cast Carbon Steel. Gold Chromate Plated. Couplings: Generally designed to interchange with DIN 3489:2001 couplings. Clamps: Generally designed to interchange with DIN 20039:1998 clamps. Pressure: Couplings: Maximum working pressure 150psi/10 Bar. Claw Clamps: Maximum working pressure 360psi/25 Bar. Non-ClawClamp: Maximum working pressure 232psi/16 Bar. Threads: BSP/BSPT in accordance with ISO 228. MALE ADAPTOR QDM38M QDM50M QDM75M 3/8 1/2 3/ QDM100M FEMALE ADAPTOR QDF38M 3/ QDF50M 1/ QDF75M 3/ QDF100M HOSE END QDHE38M QDHE50M QDHE75M 3/8 (No Collar) 1/2 (No Collar) 3 / 4 (With Collar) QDHE100M 1 (No Collar) 3.65 WASHERS FOR 2-LUG EAWR4* Black Natural Rubber 0.29 AWS6* Neoprene 0.50 *Sold only in bags of 50. Temperature Range: -20 F F. SERIES TSC - TWO-BOLT SADDLE CLAMPS (MALLEABLE IRON) PART NO. INCHES HOSE O.D. RANGE MM PRICE TSC25 5 /8-15 / TSC31 15 / / TSC / / TSC /4-1 7 / TSC / / TSC / / TSC /8-3 1 / TSC / / TSC / / TSK34 1 WITH SAFETY CLAWS /8" /4" (Investment Cast Steel) Telephone: +44 (0)

10 King Safety Cable Size: 1/2 to 1 1 /4. Length: 20 1 /4 to 38 1 /4. Materials: Details: Steel with Copper Ferrules. Stainless Steel (Upon request). These strong steel cables help prevent hose whip in case of accidental separation of coupling or clamp device. KING CABLE reaches across the hose fittings to provide stand-by safety for hose. Spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose. Thoroughly tested with years of proven service. A Positive Safeguard for Hose Connections. STYLE WSR, FOR HOSE-TO-TOOL SERVICE PART NO. CABLE SIZE LENGTH PRICE WSR1 1 /8 1 /2-1 1 / / WSR2 1 /4 1 1 / STYLE W, FOR HOSE-TO-HOSE SERVICE PART NO. CABLE SIZE LENGTH PRICE WB1 1 /8 1 /2-1 1 / / WA2 1 /4 1 1 / COPPER FERRULES FOR OFFSHORE/MINING APPLICATIONS PART NO. CABLE SIZE LENGTH PRICE WB-1/C 1 /8 1 /2-1 1 / /4 P.O.A. WA-2/C 1 /4 1 1 / P.O.A. King Cable safety restraint cables Pt. No. WB1 ( 1 /8 cable for 1 /2 to 1 1 /4 inclusive hose sizes) have a nominal breaking strain of 850 Kg using snatch test. King Cable safety restraint cables Pt. No. WA2 ( 1 /4 cable for 1 1 /2 to 3 inclusive hose sizes) have a nominal breaking strain of 2250 Kg using snatch test. This is based on maximum working pressure of 200psi (13.8bar) and cable size of 3mm for WB1 and 6mm for WA1. Telephone: +44 (0)