Low Pressure Filters. Low Pressure Filters LOW PRESSURE FILTERS

Transcription

1 Low Pressure Filters Low pressure filters are the most common type of filter found in hydraulic circuits used most often in return line applications. Low Pressure Filters Donaldson low pressure filters are rated for working pressures up to 35 psi ( kpa). In-tank and in-line configurations are available to accommodate virtually any application. Section Index Max Operating Pressure < 35 psi ( bar) Models arranged from low to maximum flow rates Spin-on Filters SP15/ W HBK SP5/... SP8/9... SP1/ TT15/3/... 5 In-tank Filters WL WL1... FIK... SRK Combo...7 In-line Cartridge Filters HRK1...7 Hydraulic Filtration 9

2 SP15/5 Max Flow: 3 gpm (11 lpm) SP15/5 Spin-On Filters Maximum Working Pressures to: 15 psi 135 kpa 1.3 bar Rated Static Burst to: Flow Range To: 375 psi 59 kpa 5.9 bar 3 gpm 11 lpm Features The SP15/5 series are economical, low pressure filters with spin-on convenience and a wide range of cleanliness ratings. Filters are available with the bypass ratings of your choice 5 psi, 15 psi, 5 psi or no bypass. Take advantage of our mix and match system of in-stock heads and filters, so you can get exactly what you need. Choose the media type and configuration that s best for your application. Options include Donaldson s exclusive Synteq, natural fiber cellulose, stainless steel wire-mesh or water absorbing media. Beta Rating Performance to ß (c) =1 Porting Size Options ½", ¾" NPT SAE-8, SAE-1 O-ring Replacement Filter Lengths Synteq 5.35" / 13 mm Synteq 7.87" / mm Cellulose 5.35" / 13 mm Standard Bypass Ratings 5 psi / 17.5 kpa / 1.7 bar 15 psi / 97 kpa /.97 bar 5 psi / 3.5 kpa /.3 bar No Bypass Assembly Weight 5.35": 1. lbs /.7 kg (approximately) 7.87":. lbs / 1 kg (approximately) Operating Temperatures Cellulose 7.87" / mm - F to 5 F / -3 C to 17 C Wire Mesh 5.35" / 13 mm Water Absorbing 5.35" / 13 mm 3 Hydraulic Filtration Filter Collapse Ratings 1 psid / 9 kpa /.9 bar (standard)

3 SP15/5 Specification Illustrations Assembly - Side View 3.7" (95mm) SP15/5 Max Flow: 3 gpm (11 lpm) Applications Fluid Conditioning Systems In-Plant Systems Mobile Equipment Power Transmissions Process Systems Short Assembly.98" (177mm) Long Assembly 9.5" (1mm) Head - Top View 1.87" (8mm) ¼"xx.5"(x) 1.5" (38mm) Hydraulic Filtration 31

4 SP15/5 Max Flow: 3 gpm (11 lpm) SP15/5 Components Filter Choices Media ß x(c) = ß x(c) = 1 Length Donaldson Comments Type Rating based on ISO 1889 in mm Part No. Synteq Synthetic µm P597 µm 7.87 P µm 7.87 P µm P593 3 µm P59 Cellulose 5 µm P551 7 µm P µm 7.87 P µm P µm 7.87 P55 Water Absorbing 1 µm P55 Absorbs approximately oz/17 ml of psid/1. bar Wire Mesh 15 µm P557 1 mesh Filter Notes * Thread size 1"-1 UNF Head Choices Port Bypass Gauge ports Gauge Port Donaldson Size Range (drill, tap, plug) Location Part No. ½" NPT 15 psi / 13. kpa / 1.3 bar () 1/8" NPT upstream side P5388 ¾" NPT 5 psi / 17.5 kpa / 1.7 bar () 1/8" NPT upstream side P51131 ¾" NPT 5 psi / 3.5 kpa /.3 bar () 1/8" NPT downstream side P5113 ¾" NPT 5 psi / 17.5 kpa / 1.7 bar none na P5113 ¾" NPT 5 psi / 3.5 kpa /.3 bar none na P51135 ¾" NPT none none na P5113 ¾" NPT 15 psi / 13. kpa / 1.3 bar none na P5378 SAE-1 none none na P51133 SAE-1 none (1) SAE- upstream side, LH P51137 SAE-1 5 psi / 3.5 kpa /.3 bar none na P511 SAE-1 5 psi / 17.5 kpa / 1.7 bar none na P5111 SAE-1 15 psi / 13. kpa / 1.3 bar none na P5379 SAE-1 5 psi / 17.5 kpa / 1.7 bar () 1/8" NPT upstream side P538 SAE-8 5 psi / 17.5 kpa / 1.7 bar none na P51138 Note: On a return line system the gauge port should be on the upstream side. We suggest a 5 psi bypass. If head is used on a suction line, the gauge port should be on the downstream side very low bypass. Mix and Match Donaldson s mix and match system provides the great performance and functional advantages of custom engineered filters with the convenience and speedy delivery of in-stock parts. Choose your options and build a filter model to suit your specifications. 3 Hydraulic Filtration

5 Filter Service Gauges - Visual Indicators Donaldson Pressure Use With Bypass Valve Rating Type Part No. P53978 P53979 P539 Range 5 to 3 psi field adj.* -5 to 15 in to 1 psi 15 psi / 13. kpa / 1.3 bar or 5 psi / 17.5 kpa / 1.7 bar or No Bypass 5 psi / 3.5 kpa /.3 bar Hg field adj.* or No Bypass 15 psi / 13. kpa / 1.3 bar or 5 psi / 17.5 kpa / 1.7 bar or No Bypass Return indicator, electrical Suction indicator, electrical Return indicator, numeric scale P5397 to 1 psi 15 psi / 13. kpa / 1.3 bar Bypass Return indicator, color coded P5398 to 1 psi 5 psi / 17.5 kpa / 1.7 bar or No Bypass Return indicator, color-coded P5399 to -3 Hg 5 psi / 3.5 kpa /.3 bar or No Bypass Suction indicator, numeric scale SP15/5 Max Flow: 3 gpm (11 lpm) P539 - P5399 Notes * NOT PRESET: Setting adjustable for desired application P53978 P53979 #1 Common; # Normally Closed; #3 Normally Open Instructions 1. Remove DIN adaptor. Remove small brass screw 3. Using 1/8" allen wrench adjust clockwise to increase set point/counter-clockwise to decrease set point. NO / NC Adjustment screw located in center of electric prongs Performance Data SP15 Filter Only (Synthetic, 5.35"/13mm) µm 11µm 3µm 1 SP15 Filter Only (Cellulose, 5.35"/13mm) µm 5µm 17µm Wire Mesh Water Absorbing SP15/5 Head Only SAE-8.5 NPT SAE-1.75 NPT SP5 Filter Only (Synthetic, 7.87"/mm) SP5 Filter Only (Cellulose, 7.87"/mm) µm µm 17µm Hydraulic Filtration 33

6 W3 Max Flow: gpm (7 lpm) W3 Spin-On Filters Working Pressures to: Rated Static Burst to: 15 psi 135 kpa 1.3 bar 5 psi 175 kpa 17. bar Applications Fluid Conditioning Systems In-Plant Systems Mobile Equipment Power Transmissions Process Systems Flow Range to: gpm 7 lpm Features This versatile spin-on series is an excellent choice for use in high corrosion environments. The gray iron head construction can be ordered with gauge or differential pressure indicator ports. Take advantage of our mix and match system of heads and filters, so you get exactly what you need. You can choose the media type and configurations that s best for your application. Beta Rating Performance to ß <(c) =1 Porting Size Options 1¼" NPT SAE- O-ring Replacement Filter Lengths.7" / 17 mm Standard Bypass Ratings 5 psi / 35 kpa / 3.5 bar No bypass Assembly Weight 7.lbs / 3. kg (short) 8. lbs / 3. kg (long) Operating Temperatures 1.7" / 71 mm - F to 5 F / -3 C to 17 C Filter Collapse Ratings 1 psid / 9 kpa /.9 bar 3 Hydraulic Filtration

7 W3 Specification Illustrations All dimensions are shown in millimeters [inches]. Assembly - Side View W3 Max Flow: gpm (7 lpm) Head - Top View Hydraulic Filtration 35

8 W3 Max Flow: gpm (7 lpm) W3 Components Filter Choices Media ß x(c) = ß x(c) = 1 Length Donaldson Comments Type Rating based on ISO 1889 in mm Part No. Synteq Synthetic < µm P1779 Viton O-ring & square seal kit µm.7 17 P171 3-seal kit µm P157 3-seal kit 11 µm.7 17 P seal kit 11 µm P seal kit 13 µm.7 17 P179 Viton O-ring & square seal kit 13 µm P1795 Viton O-ring & square seal kit 3 µm.7 17 P seal kit 3 µm P seal kit 5 µm.7 17 P seal kit 5 µm P seal kit Cellulose 5 µm.7 17 P seal kit 5 µm P555 3-seal kit 7 µm.7 17 P seal kit 7 µm P seal kit 17 µm.7 17 P seal kit 17 µm P555 3-seal kit Water Absorbing 1 µm P51183 Cellulose media, 3-seal kit. Absorbs 35 ml water. Wire Mesh 15 µm.7 17 P5575 Stainless steel wire mesh, 3-seal kit 15 µm P557 Stainless steel wire mesh, 3-seal kit Filter Notes * All models have 1½-1 UNF threads except where otherwise noted. All models measure 5."/17 mm outer diameter. Head Assembly Choices Port Bypass Seal Indicator Style Donaldson Size Rating Material & Location Part No. SAE- O-Ring 5 psi / 3.5 bar Buna-N Port Machined & Plugged P /'' NPT None Buna-N Port Machined & Plugged P Hydraulic Filtration

9 W3 Max Flow: gpm (7 lpm) Indicator Choices Indicator Connector Seal Donaldson Thermal Surge Reset Pressure Setting Style Material Part No. Lockout Control Visual Pop-up Models 15 psi / 13 kpa N/A Buna-N P5735 No No Auto 35 psi / 1 kpa N/A Buna-N P5737 No No Auto 35 psi / 1 kpa N/A Buna-N P5738 Yes Yes Manual 35 psi / 1 kpa N/A Viton P575 Yes Yes Manual Electrical / Visual Models 15 psi / 13 kpa Hirschmann Buna-N P5733 No No Auto 15 psi / 13 kpa 3-wire flying leads Buna-N P573 No No Auto 35 psi / 1 kpa Hirschmann Buna-N P5737 No No Auto 35 psi / 1 kpa Brad Harrison Buna-N P5739 No No Auto 35 psi / 1 kpa Hirschmann Buna-N P5738 Yes Yes Manual 35 psi / 1 kpa Hirschmann Viton P5758 Yes Yes Manual 35 psi / 1 kpa 3-wire flying leads Buna-N P5739 No No Auto Electrical Models 15 psi / 13 kpa Hirschmann Buna-N P57355 No No Auto 35 psi / 1 kpa Hirschmann Buna-N P57359 No No Auto 35 psi / 1 kpa Brad Harrison Buna-N P5731 No No Auto Performance Data W3 Filter Only (Synthetic,.7"/17mm) µm 11µm 13µm 3µm 5µm W3 Filter Only (Synthetic, 1.7"/71mm) <µm 11µm µm 3µm 13µm 5µm W3 Filter Only (Cellulose,.7"/17mm) µm 5µm W3 Filter Only (Cellulose, 1.7"/71mm) µm Wire Mesh Water Absorbing W3 Head Only µm 5µm 15 17µm Brad Harrison is a registered trademark of Woodhead Industries, Inc. Wire Mesh Hirschmann is a registered trademark of Richard Hirschmann of America Inc. Buna-N and Viton are registered trademarks of E. I. DuPont de Nemours and Co Hydraulic Filtration 37

10 HBK5 Max Flow: gpm (7 lpm) HBK5 Spin-On Filters Working Pressures to: 15 psi 135 kpa 1.3 bar Rated Static Burst to: Flow Range to: 5 psi 175 kpa 17. bar gpm 7 lpm Features HBK5 is a strong and durable low pressure filter with a spin-on design that simplifies servicing and reduces maintenance costs. Its heavy-duty steel canister has a rigid steel attachment plate for added strength. The head-to-canister O-ring seal is designed to ensure seal integrity beyond 5 psi/17 bar. The head is made of die-cast aluminum. Take advantage of our mix and match system of in-stock heads and filters so you can get exactly what you need, HBK5 is available with your choice of visual or electrical service indicators, and bypass ratings of 5 psi, 5 psi, or 5 psi. The filter media is Synteq, our proprietary synthetic media specifically designed for liquid filtration. HBK5 filters ship with "L", square, and O-ring gaskets (unless noted with Viton seals, then with square and o-ring gaskets). All HBK5 filters are interchangeable with SP5/, SP8/9 and SP1/1 spin-ons, and have 1½" - 1 UN threads. Viton is a registered trademark of E. I. DuPont de Nemours and Company. Beta Rating Standard Bypass Ratings Performance to ß <(c) =1 5 psi / 35 kpa / 3. bar Porting Size Options 1¼" NPT SAE- O-ring Replacement Filter Lengths.7" / 17 mm (short) 1.7" / 71 mm (long) 5 psi / 17.5 kpa / 1.7 bar 5 psi / 3.5 kpa /.3 bar Assembly Weight.9 lbs / 3.1 kg (long) 5.7 lbs /. kg (short) Operating Temperatures Filter Collapse Ratings - F to 5 F / -3 C to 17 C 15 psid / 83 kpa / 8. bar 38 Hydraulic Filtration

11 HBK5 Specification Illustrations All dimensions are shown in inches [millimeters]. Assembly - Side View Long Assembly HBK5 Max Flow: gpm (7 lpm) Applications Cooling Circuits Fluid Conditioning Systems Hydrostatic Charge Pumps Lube Oil Systems Power Transmissions Return Lines Side Loop Systems Short Assembly Head - Top View with DC Electrical Service Indicator with AC/DC Electrical Service Indicator Hydraulic Filtration 39

12 HBK5 Max Flow: gpm (7 lpm) HBK5 Components Filter Choices Media ß x(c) = ß x(c) = 1 Length Donaldson Comments Type Rating based on ISO 1889 in mm Part No. Synteq Synthetic < µm P1779 Viton Seal µm.7 17 P171 µm P µm.7 17 P µm P µm.7 17 P179 Viton Seal 13 µm P1795 Viton Seal 3 µm.7 17 P µm P µm.7 17 P µm P1588 Water Absorbing 1 µm P51183 Cellulose media, 3-seal kit. Absorbs 35 ml water. Filter Notes * Thread size 1"-1 UNF Viton is a registered trademark of E. I. DuPont de Nemours and Company. Head Choices Port Bypass Indicator Style Donaldson Size Rating & Location Part No. 1¼" NPT 5 psi / 35 kpa Visual, Both Sides P ¼" NPT 5 psi / 17 kpa Visual, Both Sides P118 1¼" NPT 5 psi / 3 kpa Visual, Both Sides P15 SAE- O-Ring 5 psi / 17 kpa Visual, Both Sides P139 Note * Donaldson uses the inlet port as the reference point. "Left side," for instance, means that the indicator mounts on the side of the filter head that is on your left when you face the inlet port. Service Indicator Options Use with Bypass Indicator Valve Pressure of: Part No. Style (3) Description Electric Models (1) 5 psi / 3.5 kpa P13 A Single post DC. Normally open. 15 psi / 13 kpa P131 A Single post DC. Normally open. 5 psi / 17.5 kpa P13839 A Single post DC. Normally closed. 5 psi / 17.5 kpa P1 A Single post DC. Normally open. 5 psi / 17.5 kpa P17113 B -wire with Cannon connector. Normally open. 5 psi / 17.5 kpa P1739 C 3-wire: White = normally open. Red = normally closed. Black = common 5 psi / 7 kpa P5797 E DC -wire. Normally closed. Gold contacts. Microprocessor compatible. Hydraulic Filtration Mix and Match Donaldson s mix and match system provides the great performance and functional advantages of custom-engineered filters with the convenience and speedy delivery of in-stock parts. Choose your options and build an HBK5 filter to suit your specifications. Service Indicator Options Use with Bypass Indicator Valve Pressure of: Part No. Style (3) Visual Models () 5 psi / 3.5 kpa P19 D 15 psi / 13 kpa P1 D 5 psi / 17.5 kpa P19 D N/A P1598 (blank plate) 5 psi / 17.5 kpa P57533 H (Visual pop up) 5 psi / 35 kpa P H (Visual pop up) Indicator Notes (1) All electric models have a maximum operating temperature of 5 F/ 11 C. () All visual models have a maximum operating temperature of 18 F/ 8 C. (3) See indicator illustrations on facing page.

13 HBK5 Service Parts SERVICE PARTS NOTE: Some service parts may not be stocked. Please contact your Donaldson sales representative for lead time details. Service Indicator Styles (See table on opposite page) HBK5 Max Flow: gpm (7 lpm) Plug P15983 (remove only for installation of Electric Indicator) O-Rings Filter Notes If you re filtering petroleum-based oil, filters with seals made of Buna-N are appropriate for most applications. If you re filtering diester, phosphate ester fluids, water glycol, water/oil emulsions and HWCF over 15 F/ 83 C, use filters with seals made of fluorocarbon, such as Viton from DuPont Dow Elastomers, or Fluorel from 3M Company. Refer to the table in the Technical Reference Guide for fluid compatibility with our filter media. Viton and Buna-N are registered trademarks of E. I. DuPont de Nemours and Company. Spin-On Filter Gaskets Each filter ships with a 3-seal kit, containing an "L" shaped, a square cut, and an O-ring gasket seal, unless otherwise noted. Use only one of the following seals. Installation instuctions can be found in the technical reference section. Head to Filter Seal P135 # P151 - Square cut gasket for use with Non-Donaldson heads L Shaped Use with filter heads with no groove or a wide groove. Square Cut Use with filter heads with a narrow groove. O-Ring - Use with Donaldson HBK5 heads only. Performance Data Hydraulic Filtration 1

14 SP5/ Max Flow: gpm (7 lpm) SP5/ Spin-On Filters Working Pressures to: 15 psi 135 kpa 1.3 bar Rated Static Burst to: Flow Range to: 5 psi 175 kpa 17. bar gpm 7 lpm Features The SP5/ spin-on filter is an economical, low-pressure model with a broad selection of media ratings. The die cast aluminum head and steel body ensure strength and durability perfect for a wide variety of mobile and inplant applications. Take advantage of Donaldson s mix and match system of in-stock heads and filter choices so you can get exactly what you need. Filter options include: synthetic media, natural-fiber cellulose, water-absorbing cellulose media and wire mesh media. SP5/ spin-on filters are interchangeable with HBK5 filters. Beta Rating Performance to ß <(c) =1 Porting Size Options 1¼" NPT SAE- O-ring Replacement Filter Lengths.7" / 17 mm 7." / 178 mm 1.7" / 71 mm Filter Collapse Ratings Standard Bypass Ratings 5 psi / 17.5 kpa / 1.7 bar 15 psi / 13. kpa / 1.3 bar 5 psi / 3.5 kpa /.3 bar.5 psi / 17. kpa /.17 bar No Bypass Assembly Weight.7 lbs /.1 kg (short) 5. lbs /.5 kg (long) Operating Temperatures 1 psid / 9 kpa /.9 bar - F to 5 F / -3 C to 17 C Hydraulic Filtration

15 SP5/ Specification Illustrations All dimensions are shown in inches [millimeters]. Assembly - Side View SP5/ Max Flow: gpm (7 lpm) Applications Fluid Conditioning Systems In-Plant Systems Mobile Equipment Power Transmissions Process Systems Pressure Gauge Pressure Gauge Head - Top View.75" (19.1) deep.75" (19.1) deep Hydraulic Filtration 3

16 SP5/ Max Flow: gpm (7 lpm) SP5/ Components Filter Choices Media ß x(c) = ß x(c) = 1 Length Donaldson Comments Type Rating based on ISO 1889 in mm Part No. Synteq Synthetic < µm P1779 Viton O-ring & square seal kit µm.7 17 P171 3-seal kit µm P157 3-seal kit 11 µm.7 17 P seal kit 11 µm P seal kit 13 µm.7 17 P179 Viton O-ring & square seal kit 13 µm P1795 Viton O-ring & square seal kit 3 µm.7 17 P seal kit 3 µm P seal kit 5 µm.7 17 P seal kit 5 µm P seal kit Cellulose 5 µm.7 17 P seal kit 5 µm P555 3-seal kit 7 µm.7 17 P seal kit 7 µm P seal kit 7 µm P555 Square seal kit, 1¼" BSP thread 17 µm.7 17 P seal kit 17 µm P555 3-seal kit 7 µm P1711 Square seal kit, 1¼" BSP thread Water Absorbing 1 µm P51183 Cellulose media, 3-seal kit. Absorbs 35 ml water. Wire Mesh 15 µm.7 17 P5575 Stainless steel wire mesh, 3-seal kit 15 µm P557 Stainless steel wire mesh, 3-seal kit All models have 1½-1 UNF threads except where otherwise noted. All models measure 5."/17 mm outer diameter. Viton is a registered trademark of E. I. DuPont de Nemours and Company. Head Choices Port Size Bypass Rating Gauge Ports (drill, tap, plug) Gauge Port Location Donaldson Part No. 1¼" NPT 15 psi / 13. kpa / 1.3 bar () 1/8" NPT upstream side P537 1¼" NPT 5 psi / 17.5 kpa / 1.7 bar () 1/8" NPT upstream side P538 1¼" NPT 5 psi / 3.5 kpa /.3 bar () 1/8" NPT downstream side P539 1¼" NPT 15 psi / 13. kpa / 1.3 bar none na P537 1¼" NPT No Bypass () 1/8" NPT downstream side P5195 1¼" NPT.5 psi / 17.3 kpa /.17 bar none na P539 1¼" NPT.5 psi / 17.3 kpa /.17 bar () 1/8" NPT downstream side P5391 1¼" NPT 5 psi / 17.5 kpa / 1.7 bar none na P539 SAE- 5 psi / 3.5 kpa /.3bar () 1/8" NPT downstream side P5733 SAE- 15 psi / 13. kpa / 1.3 bar () 1/8" NPT upstream side P5371 SAE- 5 psi / 17.5 kpa / 1.7 bar () 1/8" NPT upstream side P537 SAE- No Bypass () 1/8" NPT upstream side P517 Gaskets Each filter ships with a 3-seal kit, containing an "L" shaped, a square cut, and an O-ring gasket seal, unless otherwise noted. Use only one of the following seals. Installation instuctions can be found in the technical reference section. L Shaped Use with filter heads with no groove or a wide groove. Hydraulic Filtration Square Cut Use with filter heads with a narrow groove. Note: On a return line system the gauge port should be on the upstream side. We suggest a 5 psi bypass. If head is used on a suction line, the gauge port should be on the downstream side very low bypass. O-Ring - Use with Donaldson HBK5 heads only.

17 Optional Filter Service Indicators This handy pressure gauge, mounted on the side of an SP5/ filter head, will tell you when it s time to service the filter. Donaldson Pressure Use With Bypass Type Part No. Range Valve Rating P to 3 psi 15 psi / 13. kpa / 1.3 bar or Return indicator, electrical field adj.* 5 psi / 17.5 kpa / 1.7 bar or No Bypass P to 15 in 5 psi / 3.5 kpa /.3 bar or No Bypass Suction indicator, electrical Hg field adj.* P539 to 1 psi 15 psi / 13. kpa / 1.3 bar Return indicator, numeric scale or 5 psi / 17.5 kpa / 1.7 bar or No Bypass P5397 to 1 psi 15 psi / 13. kpa / 1.3 bar Bypass Return indicator, color coded P5398 to 1 psi 5 psi / 17.5 kpa / 1.7 bar or No Bypass Return indicator, color-coded P5399 to -3 Hg 5 psi / 3.5 kpa /.3 bar or No Bypass Suction indicator, numeric scale SP5/ Max Flow: gpm (7 lpm) P539 - P5399 Notes * NOT PRESET: Setting adjustable for desired application P53978 P53979 #1 Common; # Normally Closed; #3 Normally Open Instructions 1. Remove DIN adaptor. Remove small brass screw 3. Using 1/8" allen wrench adjust clockwise to increase set point/counter-clockwise to decrease set point. NO / NC Adjustment screw located in center of electric prongs Performance Data SP5 Filter Only (Synthetic,.7"/17mm) µm 5µm µm 13µm 3µm SP5 Filter Only (Cellulose,.7"-7"/17-178mm) µm 7µm 5µm 7µm Wire Mesh SP5/ Head Only SAE- 1.5 NPT µm 13µm 5µm SP Filter Only (Synthetic, 1.7"/71mm) <µm µm 11µm SP Filter Only (Cellulose, 1.7"/71mm) Water Absorbing Wire Mesh 5 3 7µm 5µm 15 17µm Hydraulic Filtration 5

18 SP8/9 Max Flow: 1 gpm (379 lpm) SP8/9 Spin-On Filters Working Pressures to: 15 psi 135 kpa 1.3 bar Rated Static Burst to: Flow Range to: 5 psi 175 kpa 17. bar 1 gpm 379 lpm Features SP8/9 double filter head allows for double the flow capacity, with two filters to hold more contaminant. Aluminum casting and Buna-N seals standard. SP8/9 filters are interchangeable with SP5/ filters. Buna-N is a registered trademark of E. I. DuPont de Nemours and Company. Beta Rating Performance to ß <(c) =1 Porting Size Options 1½" NPT SAE- O-ring " SAE -Bolt Flange Code 1 Replacement Filter Lengths.7" / 17 mm 7." / 178 mm Standard Bypass Ratings 5 psi / 17.5 kpa / 1.7 bar 15 psi / 13. kpa / 1.3 bar 5 psi / 3.5 kpa /.3 bar no bypass Assembly Weight 1. lbs /.5 kg (short) - approximate 11.8 lbs / 5. kg (long) Operating Temperatures 1.7" / 71 mm - F to 5 F / -3 C to 17 C Filter Collapse Ratings 1 psid / 9 kpa /.9 bar Hydraulic Filtration

19 SP8/9 Specification Illustrations All dimensions are shown in inches [millimeters]. Assembly - Side View Combination 1½" NPT and " SAE -Bolt Flange (Both Ends) or SAE- & " SAE- Bolt SP8/9 Max Flow: 1 gpm (379 lpm) Applications Fluid Conditioning Systems In-Plant Systems Mobile Equipment Power Transmissions Process Systems Head - Top View Hydraulic Filtration 7

20 SP8/9 Max Flow: 1 gpm (379 lpm) SP8/9 Components Filter Choices Media ß x(c) = ß x(c) = 1 Length Donaldson Comments Type Rating based on ISO 1889 in mm Part No. Synteq Synthetic < µm P1779 Viton O-ring & square seal kit µm.7 17 P171 3-seal kit µm P157 3-seal kit 11 µm.7 17 P seal kit 11 µm P seal kit 13 µm.7 17 P179 Viton O-ring & square seal kit 13 µm P1795 Viton O-ring & square seal kit 3 µm.7 17 P seal kit 3 µm P seal kit 5 µm.7 17 P seal kit 5 µm P seal kit Cellulose 5 µm.7 17 P seal kit 5 µm P555 3-seal kit 7 µm.7 17 P seal kit 7 µm P seal kit 7 µm P555 Square seal kit, 1¼" BSP thread 17 µm.7 17 P seal kit 17 µm P555 3-seal kit 7 µm P1711 Square seal kit, 1¼" BSP thread Water Absorbing 1 µm P51183 Cellulose media, 3-seal kit. Absorbs 35 ml water. Wire Mesh 15 µm.7 17 P5575 Stainless steel wire mesh, 3-seal kit 15 µm P557 Stainless steel wire mesh, 3-seal kit All models have 1½-1 UNF threads except where otherwise noted. All models measure 5."/17mm outer diameter. Viton is a registered trademark of E. I. DuPont de Nemours and Company. Head Choices Port Bypass Gauge Ports Gauge Port Donaldson Size Rating (drill, tap, plug) Location Part No. 1½" NPT & " SAE Bolt 15 psi / 13. kpa / 1.3 bar () 1/8" NPT upstream & downstream sides P5373 1½" NPT & " SAE Bolt 5 psi / 17.5 kpa / 1.7 bar () 1/8" NPT upstream & downstream sides P537 1½" NPT & " SAE Bolt No Bypass () 1/8" NPT upstream & downstream sides P5375 1½" NPT & " SAE Bolt 5 psi / 3.5 kpa /.3 bar () 1/8" NPT upstream & downstream sides P537 SAE- O-Ring 5 psi / 17.5 kpa / 1.7 bar () 1/8" NPT upstream & downstream sides P589 SAE- No Bypass () 1/8" NPT upstream & downstream sides P57317 Note: On a return line system the gauge port should be on the upstream side. We suggest a 5 psi bypass. If head is used on a suction line, the gauge port should be on the downstream side very low bypass. Gaskets Each filter ships with a 3-seal kit, containing an "L" shaped, a square cut, and an O-ring gasket seal, unless otherwise noted. Use only one of the following seals. Installation instuctions can be found in the technical reference section. L Shaped Use with filter heads with no groove or a wide groove. 8 Hydraulic Filtration Square Cut Use with filter heads with a narrow groove. O-Ring - Use with Donaldson HBK5 heads only.

21 Optional Filter Service Indicators for Left Side Donaldson Pressure Use With Bypass Type Part No. Range Valve Rating P53978 P to 3 psi field adj.* -5 to 15 in Hg field adj.* 15 psi / 13. kpa / 1.3 bar or 5 psi / 17.5 kpa / 1.7 bar or No Bypass Return indicator, electrical 5 psi / 3.5 kpa /.3 bar or No Bypass Suction indicator, electrical P539 to 1 psi 15 psi / 13. kpa / 1.3 bar or 5 psi / 17.5 kpa / 1.7 bar or No Bypass Return indicator, numeric scale P5397 to 1 psi 15 psi / 13. kpa / 1.3 bar Bypass Return indicator, color coded P5398 to 1 psi 5 psi / 17.5 kpa / 1.7 bar or No Bypass Return indicator, color-coded P5399 to -3 Hg 5 psi / 3.5 kpa /.3 bar or No Bypass Suction indicator, numeric scale SP8/9 Max Flow: 1 gpm (379 lpm) P539 - P5399 Notes * NOT PRESET: Setting adjustable for desired application P53978 P53979 #1 Common; # Normally Closed; #3 Normally Open Instructions 1. Remove DIN adaptor. Remove small brass screw 3. Using 1/8" allen wrench adjust clockwise to increase set point/counter-clockwise to decrease set point. NO / NC Adjustment screw located in center of electric prongs Optional Filter Service Indicators for Right Side Refer to page 189 in the accessories section for right side electrical filter service indicator options. Performance Data SP8 Filter Only (Synthetic,.7"/17mm) µm SP9 Filter Only (Synthetic, 1.7"/71mm) <µm µm 11µm 13µm 3µm µm 3 11µm 15 3µm 13µm 5µm SP8 Filter Only (Cellulose,.7"-7"/17-178mm) SP9 Filter Only (Cellulose, 1.7"/71mm) µm Water Absorbing 7µm 5µm 7µm Wire Mesh Wire Mesh µm 5µm 15 17µm SP8/9 Head Only SAE- 1.5" NPT & " SAE Bolt Hydraulic Filtration 9

22 SP1/1 Max Flow: 1 gpm (379 lpm) SP1/1 Spin-On Filters Working Pressures to: 15 psi 135 kpa 1.3 bar Rated Static Burst to: Flow Range to: 5 psi 175 kpa 17. bar 1 gpm 379 lpm Features SP1/1 double filter head allows for double the flow capacity and a unique, space-saving configuration. Aluminum casting and Buna-N seals standard. SP1/1 filters are interchangeable with SP5/ filters. Buna-N is a registered trademark of E. I. DuPont de Nemours and Company. Beta Rating Performance to ß <(c) =1 Porting Size Options 1½" NPT Replacement Filter Lengths.7" / 17 mm Standard Bypass Ratings 5 psi / 17.5 kpa / 1.7 bar Assembly Weight 7. lbs / 3. kg (short) 8.8 lbs /. kg (long) Operating Temperatures 7." / 178 mm - F to 5 F / -3 C to 17 C 1.7" / 71 mm Filter Collapse Ratings 1 psid / 9 kpa /.9 bar 5 Hydraulic Filtration

23 SP1/1 Specification Illustrations All dimensions are shown in inches [millimeters]. Assembly - Side View SP1/1 Max Flow: 1 gpm (379 lpm) Applications Fluid Conditioning Systems In-Plant Systems Hydraulic Filtration 51

24 SP1/1 Max Flow: 1 gpm (379 lpm) SP1/1 Components Filter Choices Media ß x(c) = ß x(c) = 1 Length Donaldson Comments Type Rating based on ISO 1889 in mm Part No. Synteq Synthetic < µm P1779 Viton O-ring & square seal kit µm.7 17 P171 3-seal kit µm P157 3-seal kit 11 µm.7 17 P seal kit 11 µm P seal kit 13 µm.7 17 P179 Viton O-ring & square seal kit 13 µm P1795 Viton O-ring & square seal kit 3 µm.7 17 P seal kit 3 µm P seal kit 5 µm.7 17 P seal kit 5 µm P seal kit Cellulose 5 µm.7 17 P seal kit 5 µm P555 3-seal kit 7 µm.7 17 P seal kit 7 µm P seal kit 7 µm P555 Square seal kit, 1¼" BSP thread 17 µm.7 17 P seal kit 17 µm P555 3-seal kit 7 µm P1711 Square seal kit, 1¼" BSP thread Water Absorbing 1 µm P51183 Cellulose media, 3-seal kit. Absorbs 35 ml water. Wire Mesh 15 µm.7 17 P5575 Stainless steel wire mesh, 3-seal kit 15 µm P557 Stainless steel wire mesh, 3-seal kit All models have 1½-1 UNF threads except where otherwise noted. All models measure 5."/17 mm outer diameter. Viton is a registered trademark of E. I. DuPont de Nemours and Company. Head Choice Port Size Bypass Rating Gauge Ports (drill, tap, plug) Gauge Port Location Donaldson Part No. 1½" NPT 5 psi / 17.5 kpa / 1.7 bar () 1/8" NPT upstream & downstream sides P5377 Note: On a return line system the gauge port should be on the upstream side. We suggest a 5 psi bypass. If head is used on a suction line, the gauge port should be on the downstream side very low bypass. Gaskets Each filter ships with a 3-seal kit, containing an "L" shaped, a square cut, and an O-ring gasket seal, unless otherwise noted. Use only one of the following seals. Installation instuctions can be found in the technical reference section. L Shaped Use with filter heads with no groove or a wide groove. 5 Hydraulic Filtration Square Cut Use with filter heads with a narrow groove. O-Ring - Use with Donaldson HBK5 heads only.

25 Optional Filter Service Indicators This handy pressure gauge, mounted on the side of an SP1/1 filter head, will tell you when it s time to service the filter. Donaldson Pressure Use With Bypass Type Part No. Range Valve Rating P to 3 psi 15 psi / 13. kpa / 1.3 bar or Return indicator, electrical field adj.* 5 psi / 17.5 kpa / 1.7 bar or No Bypass P to 15 in 5 psi / 3.5 kpa /.3 bar or No Bypass Suction indicator, electrical Hg field adj.* P539 to 1 psi 15 psi / 13. kpa / 1.3 bar or Return indicator, numeric scale 5 psi / 17.5 kpa / 1.7 bar or No Bypass P5397 to 1 psi 15 psi / 13. kpa / 1.3 bar Bypass Return indicator, color coded P5398 to 1 psi 5 psi / 17.5 kpa / 1.7 bar or No Bypass Return indicator, color-coded P5399 to -3 Hg 5 psi / 3.5 kpa /.3 bar or No Bypass Suction indicator, numeric scale SP1/1 Max Flow: 1 gpm (379 lpm) P539 - P5399 Notes * NOT PRESET: Setting adjustable for desired application P53978 P53979 #1 Common; # Normally Closed; #3 Normally Open Instructions 1. Remove DIN adaptor. Remove small brass screw 3. Using 1/8" allen wrench adjust clockwise to increase set point/counter-clockwise to decrease set point. NO / NC Adjustment screw located in center of electric prongs Performance Data SP1 Filter Only (Synthetic,.7"/17mm) µm 11µm 3 13µm 3µm 15 5µm SP1 Filter Only (Cellulose,.7"-7"/17-178mm) µm 7µm 5µm 7µm Wire Mesh SP1/1 Head Only " NPT SP1 Filter Only (Synthetic, 1.7"/71mm) µm 15 3µm 13µm 5µm <µm µm 5 SP1 Filter Only (Cellulose, 1.7"/71mm) Water Absorbing Wire Mesh 5 3 7µm 5µm 15 17µm Hydraulic Filtration 53

26 TT15/3/ Max Flow: 5 gpm (189 lpm) TT15/3/ Tank Top Return Spin-On Filters Working Pressures to: 1 psi 9 kpa.9 bar Applications In-Plant Systems Mobile Equipment Return Lines Rated Static Burst to: Flow Range to: 5 psi 175 kpa 17. bar 5 gpm 189 lpm Features TT15/3/ Tank Top filters are designed for industrial service. Aluminum casting and Buna-N seals standard. Used with mineral and synthetic based fluids, these return filters conveniently mount to tank tops with four screws. Common holes are used to mount the filter head to the reservoir without welding. A down pipe is attached to a threaded port and the gasket surface provides a watertight seal. Each filter provides a new bypass valve and anti-drainback valve for easy filter change. Buna-N is a registered trademark of E. I. DuPont de Nemours and Company. Beta Rating Performance to ß 7(c) = Porting Size Options 5 Hydraulic Filtration Standard Bypass Ratings psi / 15 kpa / 1.5 bar Assembly Weight ¾", 1½" NPT. lbs /.9 kg TT15 Replacement Filter Lengths.3 lbs /. kg TT3 5.83" / 18mm TT15 5. lbs /. kg TT 7.5" / 179mm TT3 Operating Temperatures 9.9" / 3mm TT - F to 5 F / -3 C to 17 C Filter Collapse Ratings 5 psid / 175 kpa / 17. bar TT15/3/ Components Filter Choices Media ß x(c) = Length Donaldson Comments Type Rating based on ISO 1889 in mm Part No. Cellulose 7µm P55 TT15 Series 1 µm P17135 TT3 Series 1 µm P171 TT Series Performance Data Pressure Drop (psi) TT Filters Only µm 1µm P µm P

27 TT15/3/ Max Flow: 5 gpm (189 lpm) Head Choices Port Bypass Gauge Ports Gauge Port Donaldson Description Head to Tank** Size Rating* (drill, tap, plug) Location Part No. Seal Part No. ¾" NPT psi / 15 kpa / 1.5 bar () 1/8" NPT upstream side P538 TT15 Series P ½" NPT psi / 15 kpa / 1.5 bar () 1/8" NPT upstream side P53973 TT3/ Series P5397 Note * Bypass valve is integral part of replacement filter. ** Included with head. On a return line system the gauge port should be on the upstream side. We suggest a 5 psi bypass. If head is used on a suction line, the gauge port should be on the downstream side very low bypass. Optional Filter Service Indicators Donaldson Pressure Use With Type Part No. Range Series P533 to 3 psi TT15/3/ Return indicator, color-coded P to 3 psi field adj.* TT15/3/ Return indicator, electrical P5398 to 1 psi TT15/3/ Return indicator, color-coded Notes * NOT PRESET: Setting adjustable for desired application Instructions 1. Remove DIN adaptor. Remove small brass screw 3. Using 1/8" allen wrench adjust clockwise to increase set point/counter-clockwise to decrease set point. NO / NC #1 Common; # Normally Closed; #3 Normally Open P /8" - 7 NPTF threads Built in snubber to minimize damage caused by pressure surges Compatible with petroleum and mineral-based fluids Anti-splash P5398 P533 Adjustment screw located in center of electric prongs TT 15 & 3/ Specification Illustrations All dimensions are shown in inches [millimeters]. Assembly - Side View.8 H [] TT15 1. H [5] TT3/.51 A 3. [93] D A 9.9 [51] or 7.8 [198].9 [1] D 1 B[5].3 C [1] 1. [3] D 1.5 B [38].8 C [].3 [58] D Head - Top View TT15 3. [9] TT3/.7 [1] 3. [7].5 [] 3.8 [9].7 [1] 3.9 [1] 3.7 [9] 3.7 [9] 5.1 [13].7 [1] 3.9 [1] Hydraulic Filtration 55

28 WL15 Max Flow: 5 gpm (189 lpm) WL15 In-Tank Filters Working Pressures to: Rated Static Burst to: Flow Range to: psi 138 kpa 13.8 bar 3 psi 7 kpa 7 bar 5 gpm 189 lpm Applications Cooling Circuits Fluid Conditioning Systems Lube Oil Systems Meets HF Specification Process Systems Return Lines Side Loop Systems Features WL15 in-tank filter meets HF automotive standard. The quick disconnect cover allows for easy and efficient filter change outs. An optional secondary inlet port offers the use of a second return line. DT high-performance replacement filters are available in five different media grades to fit any application. Beta Rating (per ISO 1889) Performance to ß 5(c) =1 Porting Size Options SAE- O-ring 1½" SAE -Bolt Flange Code 1 Replacement Filter Lengths 9." / 3 mm Filter Collapse Ratings 15 psi / 135 kpa / 1.3 bar 5 Hydraulic Filtration Standard Bypass Ratings 5 psi / 35 kpa / 3.5 bar 5 psi / 17.5 kpa / 1.7 bar Assembly Weight Code 3: 5.5 lbs /.38 kg Code 9 (with 11" extension tube):.5 lbs /.8kg Operating Temperatures -5 to 5 F (-3 to 11 C)

29 WL15 Specification Illustrations All dimensions are shown in millimeters [inches]. Assembly - Side View WL15 Max Flow: 5 gpm (189 lpm) INLET PORT 15.mm.15" 1/8" NPT (GAUGE PORT, PLUGGED) PLACES 9.mm 1.9" 11.18mm." 3.1mm [1.7"] 193.5mm [7."] 3.8mm [1."] 38.1mm 1.5" Optional Extention Tube.7mm [1.5"] OUTLET TO TANK Head - Top View 111.8mm." 5/1-18 BOLTS. EQUAL SPACE ON (.5) BOLT CIRCLE INLET PORT 15.mm.15" 1/8" NPT (GAUGE PORT, PLUGGED) PLACES 9.mm 1.9" 11.18mm." 3.1mm Hydraulic Filtration 57

30 WL15 Components High-Performance DT Filter Choices Media ß x(c) = 1 Length Donaldson Comments Type Rating based on ISO 1889 in mm Part No. DT Synteq Synthetic WL15 Max Flow: 5 gpm (189 lpm) 5 µm 9. 3 P57 DT-HF-9-5UM 8 µm 9. 3 P571 DT-HF-9-8UM 1 µm 9. 3 P57 DT-HF-9-1UM 3 µm 9. 3 P573 DT-HF-9-5UM All Donaldson DT filters utilize glass fiber media with an epoxy-based resin system for the ultimate in chemical compatibility. All Donaldson DT filters are potted with epoxy-based adhesives. Standard collapse designs are double wire-backed using epoxy-coated steel mesh for maximum pleat support and dirt capacity. Viton seals are standard on all Donaldson DT filters. Viton is a registered trademark of E. I. DuPont de Nemours and Company. Performance Data 3 WL15 Housing Only WL15 9" DT Filter Only DT-HF-9, 9"/9mm µm 5µm 8µm 1µm 3µm Hydraulic Filtration

31 WL15 Max Flow: 5 gpm (189 lpm) Filter Assembly Choices Port Bypass Seal Indicator Style Housing Assembly Donaldson Size Rating Material & Location Length Length Part No. SAE- O-ring 5 psi / 1.7 bar Buna-N Port Machined & Plugged 9" (8.mm) 1.7" (3.1mm) P5731 SAE- O-ring 5 psi / 3.5 bar Buna-N Port Machined & Plugged 9" (8.mm) 1.7" (3.1mm) P57593 SAE- O-ring 5 psi / 1.7 bar Buna-N Port Machined & Plugged 9" (8.mm) w/ 11" (79.mm) extension.88" (31.9mm) P /" SAE Bolt Flange Code 1 5 psi / 3.5 bar Buna-N Port Machined & Plugged 9" (8.mm) w/ 11" (79.mm) extension.88" (31.9mm) P57595 Indicator Choices Indicator Connector Donaldson Pressure Setting Style Part No. Visual Pressure Gauges, - psi 5 psi / 17 kpa NA X psi / 35 kpa NA X1175 Visual Pressure Gauges, - psi 5 psi / 35 kpa NA X11 Electrical Service Indicator 18 psi / 1 kpa Hirschman X psi / 1 kpa Hirschman X11 18 psi / 1 kpa Brad Harrison X psi / 1 kpa Brad Harrison X11 Head/Bowl/Housing Seal Kits Donaldson Part No. Material X111 Buna X1111 Viton Hydraulic Filtration 59

32 WL1 Max Flow: gpm (757 lpm) WL1 In-Tank Filters Working Pressures to: psi 138 kpa 13.8 bar Rated Static Burst to: Flow Range to: 3 psi 7 kpa.7 bar gpm 757 lpm Features WL1 in-tank filters meet the HF automotive standard. The quick disconnect cover allows for easy and efficient filter change-outs. An optional secondary inlet port offers the use of a second return line. These units can be top or side reservoir mounted. Use the optional anti-backflow valve (X1153) when installing this filter assembly to the side of a reservoir. DT high-performance replacement filters are available in five different media grades to fit any application. Head Material: aluminum Housing Material: Steel Beta Rating Performance to ß 5(c) =1 Porting Size Options SAE- O-ring 1½" SAE -Bolt Flange Code 1 Replacement Filter Lengths 9." / 3 mm 18.8" / 59 mm 7.51" / 99 mm Standard Bypass Ratings 5 psi / 35 kpa / 3.5 bar 5 psi / 17.5 kpa / 1.7 bar Assembly Weight Single Length, 5.5 lbs /.3 kg Double Length, 1 lbs / 7.3 kg Triple Length, 3 lbs / 1 kg Operating Temperatures -5 to 5 F (-3 to 11 C) Filter Collapse Ratings 15 psid / 135 kpa / 1.3 bar Hydraulic Filtration

33 WL1 Specification Illustrations All dimensions are shown in millimeters [inches]. Assembly - Side View WL1 Max Flow: gpm (757 lpm) Applications Cooling Circuits Fluid Conditioning Systems Lube Oil Systems Meets HF Specification Process Systems Return Lines Side Loop Systems Short: 7.57" (19.8mm) Medium: 1.9" (3.8mm) Long:.31" (8.7mm).8" (1.8mm) 117.mm (Ø.3") Head - Top View optional Hydraulic Filtration 1

34 WL1 Max Flow: gpm (757 lpm) WL1 Components High-Performance DT Filter Choices Media ß x(c) = 1 Length Donaldson Comments Type Rating based on ISO 1889 in mm Part No. DT Synteq Synthetic µm 9. 3 P5881 DT-HF-9-UM 5 µm 9. 3 P57 DT-HF-9-5UM 8 µm 9. 3 P571 DT-HF-9-8UM 1 µm 9. 3 P57 DT-HF-9-1UM 3 µm 9. 3 P573 DT-HF-9-5UM µm P58817 DT-HF-18-UM 5 µm P57 DT-HF-18-5UM 8 µm P575 DT-HF-18-8UM 1 µm P57 DT-HF-18-1UM 3 µm P577 DT-HF-18-5UM µm P58818 DT-HF-7-UM 5 µm P578 DT-HF-7-5UM 8 µm P579 DT-HF-7-8UM 1 µm P58 DT-HF-7-1UM 5 µm P581 DT-HF-7-5UM All Donaldson DT filters utilize glass fiber media with an epoxy-based resin system for the ultimate in chemical compatibility. All Donaldson DT filters are potted with epoxy-based adhesives. Standard collapse designs are double wire-backed using epoxy-coated steel mesh for maximum pleat support and dirt capacity. Viton seals are standard on all Donaldson DT filters. Viton is a registered trademark of E. I. DuPont de Nemours and Company. Performance Data WL1 Housing Only WL1 Bypass Valve PSID cracking 5 PSID cracking WL1 9" DT Filter Only DT-HF-9, 9"/9mm WL1 18" DT Filter Only DT-HF-18, 18"/57mm 15 1 WL1 7" DT Filter Only DT-HF-7, 7"/8mm µm 9 5µm 8µm 1µm 3 5µm µm 8µm 8 1µm 5µm µm 3 1µm 8µm 5µm Hydraulic Filtration

35 WL1 Max Flow: gpm (757 lpm) Filter Assembly Choices Port Bypass Seal Indicator Style Housing Assembly Donaldson Size Rating Material & Location Length Length Part No. () SAE- O-ring 5 psi / 1.7 bar Buna-N Port Machined & Plugged 9" (8.mm) 1.7" (3.1mm) P573 () SAE- O-ring 5 psi / 1.7 bar Buna-N Port Machined & Plugged 18" (57.mm) 1.9" (535.mm) P5733 () SAE- O-ring 5 psi / 1.7 bar Buna-N Port Machined & Plugged 7" (85.8mm) 3." (773.mm) P573 () 1-1/" SAE Bolt Flange Code 1 5 psi / 1.7 bar Buna-N Port Machined & Plugged 18" (57.mm) 1.9" (535.mm) P5735 (1) 1-1/" SAE Bolt Flange Code 1 5 psi / 3.5 bar Buna-N Port Machined & Plugged 18" (57.mm) 1.9" (535.mm) P573 (1) 1-1/" SAE Bolt Flange Code 1 5 psi / 3.5 bar Buna-N Port Machined & Plugged 7" (85.8mm) 3." (773.mm) P5737 () SAE- O-ring 5 psi / 3.5 bar Buna-N Port Machined & Plugged 18" (57.mm) 1.9" (535.mm) P5759 Indicator Choices Indicator Connector Donaldson Pressure Setting Style Part No. Visual Pressure Gauges, - psi 5 psi / 17 kpa NA X psi / 35 kpa NA X1175 Visual Pressure Gauges, - psi 5 psi / 35 kpa NA X11 Electrical Service Indicator 18 psi / 1 kpa Hirschman X psi / 1 kpa Hirschman X11 18 psi / 1 kpa Brad Harrison X psi / 1 kpa Brad Harrison X11 Head/Bowl/Housing Seal Kits Donaldson Part No. Material X111 Buna X1111 Viton Outlet Check Valve Donaldson Part No. X1153 Hydraulic Filtration 3

36 FIK Max Flow: 17 gpm ( lpm) FIK In-Tank Filters Working Pressures to: 15 psi 1 kpa 1 bar Rated Static Burst to: Flow Range to: 17 psi 15 kpa 15 bar 17 gpm lpm Features STYLE A STYLE B STYLE C STYLE D FIK in-tank filters are economical, space-saving units offering a variety of options including aluminum or plastic access covers, mounting option, breathers and accessories including diffusers and oil dipsticks. FIK filters, featuring a die-cast aluminum head and a steel or plastic canister are designed to handle heavy-duty applications. The head (and the inlet) sit above the tank, while the housing remains inside the tank, offering design-in flexibility. Optional air breather featuring T.R.A.P. technology are available with style A and B, designed to allow the breather to be mounted directly in the FIK filter head, thus eliminating the cost associated with an additional penetration to the hydraulic tank for breather installation. FIK filters offer three service indicators to choose from: pressure gauge, visual indicator and electrical indicator. FIK filter assemblies are shipped from the factory with cellulose or Synteq synthetic filter media, and replacement cartridges are offered in a range of media types and performance ratings. STYLE E Beta Rating Performance to ß 8(c) =1 Porting Size Options Standard Bypass Ratings psi / 15 kpa / 1.5 bar Operating Temperatures ½", ¾", 1" NPT - F to 19 F / - C to 9 C SAE-8, SAE-1, SAE-1, SAE-, SAE- O-ring " SAE -Bolt Flange Code 1 Collapse Ratings 15 psid / 1 kpa / 1 bar Hydraulic Filtration

37 Redesigned with Features for Application Flexibility, Improved Servicing and Enhanced Filtration Performance STYLE B Shown Below FIK Max Flow: 17 gpm ( lpm) Applications Cooling Circuits Fluid Conditioning Systems Lube Oil Systems Process Systems Return Lines Side Loop Systems Multifunctional Ports (custom) Contact your Donaldson sales representative for details Can be converted into auxiliary inlet ports The two secondary inlet ports can be used in conjunction with the main inlet port for higher flow rates T.R.A.P. Breather Technology Breather ordered separately Plug ships standard. Pressurized & atmospheric breathers available. Quick fit connection Anti-splash design allows smooth operation under tilt conditions Keeps reservoir free from condensation Flat Gasket Design For leak-tight operation Service Indicator Ports Electrical, visual or pressure gauge options Accessories (custom) Contact your Donaldson sales representative for details Oil dipstick Diffuser Extension tube Flexible Mounting Configurations or hole mounting option Better sealing and stability Enhanced stability on plastic tanks Reverse compatible retrofit existing tanks with the new hole configuration Built-In By-Pass Valve New by-pass valve installed with every filter replacement Filter Media Technology Wide range of Donaldson media offerings to meet various performance targets and cleanliness standards Hydraulic Filtration 5

38 FIK Max Flow: 17 gpm ( lpm) FIK Specification Illustrations Low Flow Assemblies < 3 gpm (1 lpm) High Flow Assemblies 5-17 gpm (18-3 lpm) STYLE A K3319 STYLE B K811 K81 K813 K178 STYLE C, D, E Assembly part numbers on following page Improved Design Feature or hole mounting options Built-in by-pass valve in the cartridge Improved seal design Anti-splash air flow path Optional mini T.R.A.P. breather Improved Design Feature or hole mounting options Built-in by-pass valve in the cartridge Improved seal design Anti-splash air flow path Optional mini T.R.A.P. breather Multifunctional ports for accessories Improved Design Feature Improved seal design Built-in by-pass valve in the cartridge Assembly - Side Views STYLE A STYLE B STYLE C, D, E Head - Top Views Ports for service indicator Hydraulic Filtration

39 High Flow Assemblies 5-17 gpm (18-3 lpm) FIK Max Flow: 17 gpm ( lpm) STYLE C K177 K177 K1771 K799 K177 K798 K1773 K317 ( point mount only) Improved Design Feature or hole mounting options Head - Top Views STYLE D K78 K711 K79 K71 K75 K713 Design Feature hole mounting STYLE E K51 K553 Design Feature 3 hole mounting STYLE C STYLE D STYLE E Port for service indicator Port for service indicator Dimensions ASSEMBLY DIMENSIONS Port for service indicator ASSEMBLY PART NUMBER STYLE A STYLE B STYLE C STYLE D STYLE E K1771 K177 K1773 K177 K799 K3319 K811 K81 K813 K178 K317 pt mount only K177 K798 K78 K711 K79 K71 K75 K713 K51 K553 mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in C D S SERVICE CLEARANCE G B TANK OPENING H J K F POINT MOUNT Ø. Ø N/A N/A N/A N/A N/A N/A N/A N/A F1 Ø8 Ø3.3 Ø11 Ø.1 Ø11 Ø.1 Ø11 Ø N/A N/A N/A N/A N/A N/A N/A N/A F Ø9 Ø3.5 Ø11 Ø.57 Ø11 Ø.57 Ø11 Ø.57 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N 3 POINT MOUNT N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Ø11 Ø.3 N1 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 5 5 N N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 1 1 N3 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Ø175 Ø.89 E POINT MOUNT N/A N/A Ø1.5 Ø.1 Ø11 Ø.3 Ø11 Ø.3 N/A N/A E1 Ø8 Ø3.31 Ø1 Ø.9 Ø1 Ø.9 Ø1 Ø.9 N/A N/A Ø115 Ø.53 Ø115 Ø.53 Ø115 Ø N/A N/A E Ø9 Ø3.5 Ø13 Ø5.1 Ø13 Ø5.1 Ø13 Ø5.1 N/A N/A Ø1 Ø.9 Ø1 Ø.9 Ø1 Ø N/A N/A E3 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Ø Ø8. Ø Ø8. Ø Ø8. N/A N/A WEIGHT lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg K Hydraulic Filtration 7

40 FIK Max Flow: 17 gpm ( lpm) FIK Components Assembly Choices Bypass Assembly ß x(c) Filter Provided Filter Diameter Filter Length Flow Range Port Size Rating* Part No. = 1 Media with Filter (in./mm) (in./mm) (@~5 psid / 3.5 kpa) additional filter choices on following pages to meet various performance requirements Low Flow Assemblies STYLE A SAE-8 O-Ring psi/1.5 bar K µm Cellulose P / 3.38 / 1 1 gpm / 38 lpm STYLE B SAE-1 O-Ring psi/1.5 bar K811 3 µm Cellulose P / / 8 1 gpm / 53 lpm SAE-1 O-Ring psi/1.5 bar K81 3 µm Cellulose P / 7 5. / 18 3 gpm / 8 lpm SAE- O-Ring psi/1.5 bar K813 3 µm Cellulose P / / 1 3 gpm / 1 lpm SAE- O-Ring psi/1.5 bar K µm Synthetic P / / 1 8 gpm / 1 lpm High Flow Assemblies STYLE C 1/" NPT psi/1.5 bar K317 3 µm Cellulose P / 5. / 7 5 gpm / 18 lpm 1" NPT psi/1.5 bar K177 3 µm Cellulose P / / 8 15 gpm / 5 lpm 3/" NPT psi/1.5 bar K µm Cellulose P / 7 5. / gpm / 8 lpm 1" NPT psi/1.5 bar K177 3 µm Cellulose P / 7 5. / 18 1 gpm / 79 lpm SAE-1 O-Ring psi/1.5 bar K µm Cellulose P / 7 5. / gpm / 8 lpm SAE-1 O-Ring psi/1.5 bar K µm Synteq P / 7 5. / gpm / 9 lpm SAE-1 O-Ring psi/1.5 bar K799 3 µm Cellulose P / 7 5. / 18 1 gpm / 79 lpm SAE-1 O-Ring psi/1.5 bar K798 3 µm Cellulose P / 7 8. / 9 3 gpm / 1 lpm STYLE D SAE- O-Ring psi/1.5 bar K78 3 µm Cellulose P / / 3 gpm / 8 lpm SAE- O-Ring psi/1.5 bar K µm Synteq P / / 3 gpm / 15 lpm " SAE -Bolt psi/1.5 bar K79 3 µm Cellulose P / / 5 1 gpm / 399 lpm " SAE -Bolt psi/1.5 bar K71 11 µm Synteq P / / 5 7 gpm / 78 lpm " SAE -Bolt psi/1.5 bar K75 3 µm Cellulose P / / 17 gpm / 3 lpm " SAE -Bolt psi/1.5 bar K µm Synteq P / / 1 gpm / 51 lpm STYLE E SAE- O-Ring psi/1.5 bar K51 3 µm Cellulose P / / 3 7 gpm / 177 lpm SAE- O-Ring psi/1.5 bar K µm Synteq P / / 3 3 gpm / 1 lpm Note *Bypass valve is an integral part of the replacement filter. Service indicator port available for all assemblies. Filter Notes FIK filters utilize either glass fiber, cellulose, or wire mesh media. All FIK filters are potted with polyurethane adhesives. Synteq media designs are double wire-backed using epoxy-coated steel mesh for maximum pleat support and dirt capacity. Buna-N seals are standard on all FIK filters. Buna-N is a registered trademark of E. I. DuPont de Nemours and Company. 8 Hydraulic Filtration

41 T.R.A.P. Breather Choices For Redesigned Style A and B Assemblies with Hole Mounting Configurations Only Note: T.R.A.P. breathers are not compatible on older style assemblies with hole mounting configuration Part No. Description Efficiency Fits Assembly Models: STYLE A FIK Max Flow: 17 gpm ( lpm) P5739 Mini T.R.A.P. 3 97% K3319 STYLE B Black P758 Standard plug (no air exchange) N/A K811, K81, K813, K178 STYLE A Blue P753 Atmospheric pressure 1 98% K811, K81, K813, K178 Red P psi (½ bar) pressurized 1 98% K811, K81, K813, K178 STYLE B Standard Breather Choices Replacement Breathers for Older Style A and B Assemblies with Hole Mounting Configuration Only Part No. Efficiency Fits Assembly Models: STYLE A P µm K3319 STYLE B P173 1 µm K811, K81, K813 Service Indicators Pressure Gauges P17195 G 1/8" (center back) DC Electrical Indicator P psi / 1. bar (8V AC/DC) Visual Indicator P psi / 1. bar P G 1/8" (bottom mount) -1.5 to 7 psi -1 to +5 bar G 1/8" G 1/8" Hydraulic Filtration 9

42 FIK Max Flow: 17 gpm ( lpm) FIK Components Filter Choices - Low Flow Assemblies Media ß x(c) = ß x(c) = 1 Length Donaldson Type Rating based on ISO 1889 in mm Part No. STYLE A K3319 Synteq Synthetic µm.38 1 P µm.38 1 P µm.38 1 P1718 Cellulose 7 µm.38 1 P µm.38 1 P17183 Wire Mesh µm.38 1 P µm.38 1 P17183 Filter Choices - Low Flow Assemblies Media ß x(c) = ß x(c) = 1 Length Donaldson Type Rating based on ISO 1889 in mm Part No. STYLE B K811 Synteq Synthetic 11 µm P µm P1715 Cellulose 7 µm P µm P17158 Wire Mesh µm P µm P1715 K81 Synteq Synthetic µm P µm P µm P17153 Cellulose 7 µm P µm P17153 Wire Mesh µm P µm P17153 K813 Synteq Synthetic µm P µm P µm P17183 Cellulose 7 µm P µm P Wire Mesh µm P17183 K178 Synteq Synthetic µm P µm P µm P17183 Cellulose 7 µm P µm P Wire Mesh µm P Hydraulic Filtration

43 High Flow Assemblies Media ß x(c) = ß x(c) = 1 Length Donaldson Type Rating based on ISO 1889 in mm Part No. STYLE C K317 Synteq Synthetic µm. 7 P µm. 7 P µm. 7 P1715 Cellulose 7 µm. 7 P µm. 7 P1715 Wire Mesh µm. 7 P µm. 7 P1715 K177 Synteq Synthetic 11 µm P µm P1715 Cellulose 7 µm P µm P17158 Wire Mesh µm P µm P1715 K1771, K177, K1773, K177, K799 Synteq Synthetic µm P µm P µm P17153 Cellulose 7 µm P µm P17153 Wire Mesh µm P µm P17153 K798 Synteq Synthetic µm 8. 9 P µm 8. 9 P µm 8. 9 P17183 Cellulose 7 µm 8. 9 P µm 8. 9 P Wire Mesh µm 8. 9 P17183 FIK Max Flow: 17 gpm ( lpm) High Flow Assemblies Media ß x(c) = ß x(c) = 1 Length Donaldson Type Rating based on ISO 1889 in mm Part No. STYLE D K78, K711 Synteq Synthetic µm P µm P µm P17155 Cellulose 7 µm P µm P Wire Mesh µm P K79, K71 Synteq Synthetic µm P µm P µm P17157 Cellulose 7 µm P µm P17157 Wire Mesh 9 µm P17157 K75, K713 Synteq Synthetic µm P µm P µm P17158 Cellulose 7 µm P µm P17158 Wire Mesh µm P µm P STYLE E K51, K553 Synteq Synthetic µm P µm P µm P Cellulose 7 µm P µm P1715 Wire Mesh µm P µm P17153 Hydraulic Filtration 71

44 FIK Max Flow: 17 gpm ( lpm) Performance Data STYLE A K3319 Assembly (.38"/1mm) µm 11µm3µm7µm7µm 5 /9µm Synthetic Cellulose Wire Mesh NOTE: Please note that the line styles used represent different media types Synteq Synthetic Cellulose Wire Mesh STYLE B K811 Assembly (3.3"/8mm) µm 3µm 7µm 7µm /9µm Synthetic Wire Mesh Cellulose K81 Assembly K813 & K178 Assemblies (8.7"/1mm) (5."/18mm) µm 7µm µm 11µm 3µm 7µm 7µm µm 11µm µm 5 7µm 5 /9µm3 3 Synthetic Wire Mesh Cellulose 3 1 Synthetic Wire Mesh Cellulose STYLE C K317 Assembly (."/7mm) µm 7 7µm 5 11µm 3µm /9µm 7µm Synthetic Wire Mesh Cellulose K177* Assembly (3.3"/8mm) µm 3µm 7µm 7µm /9µm Synthetic Wire Mesh Cellulose K1771**, K177, K1773**, K177** & K799 Assemblies (5."/18mm) µm 11µm 3µm 7µm 7µm/9µm Synthetic Wire Mesh Cellulose *Subtract ½ psi **Add ½ psi 7 Hydraulic Filtration

45 Performance Data STYLE C, continued K798 Assembly (8."/9mm) µm 7µm µm 7µm 11µm µm Synthetic Wire Mesh Cellulose FIK Max Flow: 17 gpm ( lpm) STYLE D µm 11µm 3µm7µm 7µm K78 & K711 Assemblies (7.9"/3mm) Synthetic Cellulose µm 11µm 7µm 7µm 3µm 9µm µm 11µm 3µm 5 5 7µm 7µm 3 3 /9µm K79 & K71 Assemblies (9.8"/5mm) Synthetic Cellulose Wire Mesh K75 & K713 Assemblies (15.75"/mm) Synthetic Cellulose Wire Mesh STYLE E K51 & K553 Assemblies (7.9"/3mm) Synthetic µm 11µm 3µm 7µm 7µm Cellulose Wire Mesh /9µm 1 Hydraulic Filtration 73

46 SRK Combo Max Flow: 79 gpm (3 lpm) SRK Suction/Return Combination In-Tank Filters Working Pressures to: 15 psi 1 kpa 1. bar Applications Hydrostatic Transmissions Mobile Equipment Rated Static Burst to: Flow Range to: 17 psi 197 kpa 15. bar 79 gpm 3 lpm Features The SRK tank-mounted suction and return filter is a popular choice for hydrostatic transmissions. The filtered flow is maintained at a slight backpressure to provide clean, pressurized oil, mainly for charge pumps in hydrostatic transmission systems. The pressurized flow is designed to reduce cavitation risks. This patented design uses an integrated main flow and bypass flow filter filter, which is capable of delivering filtered and pressurized oil, even in bypass situations. Emergency suction flow is also filtered. The SRK operates in a standard flow (outside to inside) configuration. SAE O-Ring ports are standard to meet popular application requirements. -point mounting Head material: aluminum Buna-N is a registered trademark of E. I. DuPont de Nemours and Company. Housing material: steel Cover material: glass-filled nylon Buna-N seals standard Main filters include integrated bypass filters Beta Rating (per ISO 1889) Performance to ß 13(c) =1 Porting Size Options Assembly Weight 1.8 lbs /.9 kg Operating Temperatures Inlet: SAE-1, SAE- O-ring - F to 1 F / -3 C to 1 C Outlet: SAE-1 O-Ring Replacement Filter Lengths 18." / 7 mm Standard Bypass Ratings 3 psi / 5 kpa /.5 bar Standard Backpressure Ratings Filter Collapse Ratings 15 psid / 1 kpa / 1 bar Return Flow Rate 79 gpm (3 lpm) Emergency Suction Flow Rate 7 gpm (1 lpm) 7.3 psi / 5 kpa /.5 bar 7 Hydraulic Filtration

47 SRK Filter Assemblies Donaldson Part No. Inlet Port Connections Outlet Port Connections Bypass Valve Emergency Suction SRK Combo Max Flow: 79 gpm (3 lpm) Comments K13 SAE- & SAE-1 () - SAE-1 3 psi (.5 bar) 15 µm Wire Mesh Indicator not included Filter Choices Media ß x(c) = 1 Length Donaldson Bypass Comments Type Rating based on ISO 1889 in mm Part No. Synteq Synthetic 13 µm P µm Wire For Combo 3 Assemblies Standard collapse designs are double wire-backed using epoxy-coated steel mesh for maximum pleat support and dirt capacity. All SRK filters are standard flow (outside to inside). Buna-N seals are standard on all SRK filters. Suction Filter Choices Media ß x(c) = Length Donaldson Type Rating based on ISO 1889 in mm Part No. Wire Mesh 15 µm P7183 Indicator Options Donaldson Part No. Set Point Style Connection P77 3 psi (.5 bar) 3 VDC, N.O. G1/8" P713 3 psi (.5 bar) 3 VDC, N.C. G1/8" P71 3 psi (.5 bar) Visual G1/8" Assembly - Side View Performance Data All dimensions are shown in millimeters [inches]. Head - Top View optional Flow Schematic Hydraulic Filtration 75

48 HRK1 Max Flow: 3 gpm (1135 lpm) HRK1 In-Line Cartridge Filters Working Pressures to: 15 psi 135 kpa 1.3 bar Rated Static Burst to: Flow Range to: 5 psi 35 kpa 3.5 bar 3 gpm 1135 lpm Features The HRK1 high flow filter combines the best features of its predecessor, the HEK11: ANSI inlet port options, top cover filter servicing for ease of maintenance, and a selection of service indicators. The HRK1 all-steel housing design provides a strong, durable, and dependable unit. It offers standard features like deep pleat filters for higher dirt holding capacity and standard Donaldson DT -layer media filter construction. This technology, combined with many other standard features, is ideal for today s applications in pulp and paper, power generation and steel mill applications. Five standard grades of media are offered. A port for an electrical indicator is incorporated into the differential indicator block. Robust "Twist & Lift" cover for simplified servicing Multiple bypass valve design assures proper operation Wide variety of bypass valve ratings Reverse flow (inside to outside) filters for positive contamination containment Beta Rating (per ISO 1889) Performance to ß <(c) =1 Porting Size Options " ANSI Flange, 8-bolt 15# Replacement Filter Lengths 1.99" / 559 mm Filter Collapse Ratings 1 psid / 89 kpa /.9 bar Fluorocarbon seals standard Housing & cover material: steel Drain plug in bottom Bleed valve in cover Fill plug in cover Standard Bypass Ratings 5 psi / 3.5 kpa /.3 bar 5 psi / 17 kpa / 1.7 bar 5 psi / 35 kpa / 3. bar No Bypass Assembly Weight 1 lbs / kg Operating Temperatures - F to 5 F ( -9 to 11 C) 7 Hydraulic Filtration