Accessories. magnaloy coupling company P.O. Box 455 Alpena, MI INDEX: Filler Breather Adapters...3
|
|
- Buddy Shields
- 5 years ago
- Views:
Transcription
1 Accessories INDEX: Magnaloy General Information... What You Should Know About Filler Breathers... Filler Breather Adapters... Filler Breathers...4 Filler Breather Cap Types...4 Mounting Flanges...4 Screen Materials...4 Filler Breather Accessories & Assemblies...5 Reservoir Flanges...6 Suction Strainers...7 Liquid Level Gauges...8 Standard Line...8 Premium Line...8 Gauge Isolators... Single Position Gauge... Six Positon Gauge... Pressure Switchs...10 Modular O-Ring Kits...11 Other Magnaloy Products Catalog No. AP Magnaloy Coupling Co.
2 General Information What You Should Know About Filler Breathers! Sizing is based on the reservoir air exchange requirements, NOT the pump output. Magnaloy Filler Breather Assemblies are sized for a maximum pressure drop of.45 in. Hg. Hydraulic users rarely change the breather filter, which can contribute to pump cavitation. A routine of regularly changing or cleaning the air filter should be developed. A vacuum indicator can be very helpful. The NFPA standard calls for TWO filler openings, each of which should pass a minimum of 5 GPM. They should be located on opposite sides or ends of the reservoir. The maximum air filtration allowed is 40 micron. All of Magnaloy s Filler Breather Cap are 10 micron. The filler screen should be at least 0 mesh and should have an internal metal guard to prevent the fill spout from puncturing the screen. All Magnaloy s screens are 0 mesh and we offer a screen guard as on option. For More Product Information Check Out! It is a well established fact that the major cause of failure in an elastomeric insert type drive coupling is hysteresis failure which results from overworking the insert by application of cyclic loads and the associated heat generation. Load-Lock Design is simple and effective. The drive-lug configuration is tapered from top to base, as are the mating lugs of the opposing coupling hub. Under load, the insert conforms to the tapers, inter-locking the two hubs. This load-lock design protects bearings and equipment by eliminating end thrust in both directions... and it requires only one set-screw in each hub. Flexible Drive Couplings Pump/Motor Mounts Cylinder Rod End Alignment Couplers Hydraulic Manifold & Manifold Accessories Fluid Power Accessories Product Updates Customer Support Magnaloy is a registered trademark of the Douville Johnston Corp.
3 Filler Breather Adaptors High Capacity Spin-On Converts standard breather installation to accept a high efficiency spin-on air breather Features: Material - Anodized 6061 Aluminum. Flange Adopter - Accepts 1 1/-16 UN Threaded Spin-On Filters, uses same mounting bolt circle as our Filler Breather Screens and comes complete with mounting hardware and gaskets. Bayonet Adapters - Accept either 1 1/-16 UN, 1 1/8-16 UN or 1-1 UN threaded Spin-On Filters, fits all popular filler breather bayonet flanges and utilizes a Buna-N gasket to insure proper sealing. D-THREAD B NPT Style Spin-On C A FBS P FBS P FBS P A B C D un 1 1/8-16 un 1 1/ - 16 un E /4 - NPT /4 - NPT 1 1/4 - NPT E-THREAD 1/4 NPT (FG STYLE ONLY) D-THREAD B C A Flange Style Spin-On FBS F FBS FG A B C D / - 16 un 1 1/ - 16 un D-THREAD B Bayonet Style Spin-On A B C D C A FBS-1001-B FBS-1016-B FBS B un 1 1/8-16 un 1 1/ - 16 un
4 Filler Breathers Allows Filtered Air to Easily Flow in and out of the Hydraulic Reservoir while Preventing Airborne Contaminants from Entering the System. Filler Breather Cap Features: Stainless Steel. 10 Micron Filter. Flows to 50 GPM. Types: A Cap: D Cap: H Cap: K Cap: 0 GPM, Stainless Steel. 0 GPM, Stainless Steel. 10 GPM, Stainless Steel. Pressure Cap, 0 PSI-no relief, Chrome Plated. GPM rating is equivalent air flow through cap to compensate for oil flow into and out of reservoir. Mounting Flange Features: Blue Zinc Plated Three Lengths Available Sizes: 008 Flange: 108 Flange: 600 Flange: Screen Materials: C* Screen: N* Screen: P Screen: R* Screen: V* Screen: W Screen: X Screen: Y Screen: Z Screen: Height 1/ Height 1 1/ Height 6 *Check with factory for availability. 16 Mesh, Stainless, Length 00 Mesh, Brass, 6 Length 0 Mesh, Nylon, 4 Length 0 Mesh, Brass, 4 Length 0 Mesh, Brass, 1/4 Length 0 Mesh, Stainless, 1/4 Length 0 Mesh, Stainless, 6 1/4 Length 0 Mesh, Stainless, 8 1/4 Length 0 Mesh, Stainless, 10 1/4 Length 4
5 Filler Breather Accessories G PL L SM D Options: G - PL - L - SM - D - Screen Guard (Required by NFPA Standard). Pad Lock, not included with locking cap option. Locking Cap. Side Mounting Kit. Dipstick, specify length, measured from bottom of mounting flange to end of dipstick. DIPSTICK LENGTH How to Order: Standard Assemblies: FB-A008W: FB-A008P: FB-K008W: Stainless steel, weatherproof, 10 micro, 0 GPM Cap; 1/ Mounting Flange; 0 mesh, 1/4, stainless steel Screen. Stainless steel, weatherproof, 10 micro, 0 GPM Cap; 1/ Mounting Flange; 0 mesh, 4, nylon Screen. Pressurized, chrome plated, 0 PSI Cap; 1/ Mounting Flange; 0 mesh, 1/4, stainless steel Screen. Custom Assemblies: Select the components that best meet your particular hydraulic system requirements and custom build the part number as follows: F B - A Y - D 8 Option (8 Dipstick) Screen Type (Y) Flange Length (1/ ) Cap Type (A) 5
6 Reservoir Flanges Positive Sealing Suction and Return Line Flanges Features: Positive Urethane Seal - protects against particulate and liquid contamination. Mounting Hardware - required screws, bolts, washers and gaskets are included. Available in Many Popular Tube and Pipe Sizes - 1 sizes available, 1/ thru. Large Suction Line Flange Plate - allows easy access for suction line strainer installation and maintenance. Rigid/Heavy Duty Zinc Plated Die Cast Flange - will not deflect or distort, provides sealing forces to urethane seal. 4 /4 /8 R Y X 1/8 /4 F E B A Tube Sizes: From 1/ to Return Line Flange: 4 Suction Line Flange: C D Part Number RLF-008T RLF-01T RLF-100T RLF-104T RLF-108T RLF-00T Part Number RLF-008P RLF-01P RLF-100P RLF-104P RLF-108P RLF-00P Nominal Tube Size 1/ / /4 1 1/ Nominal Pipe Size 1/ / /4 1 1/ Tube OD X Pipe OD X Clearance Hole Dia. Y Pipe Sizes: From 1/ to Return Line Flange: Clearance Hole Dia. Y Part Number SLF-008T SLF-01T SLF-100T SLF-104T SLF-108T SLF-00T Part Number SLF-008P SLF-01P SLF-100P SLF-104P SLF-108P SLF-00P Nominal Tube Size 1/ / /4 1 1/ Nominal Pipe Size 1/ / /4 1 1/ A B C D Suction Line Flange: A B C D Tube OD E Pipe OD E All assemblies are supplied with complete mounting hardware: including screws, bolts, washers and gaskets as required. Clearance Hole Dia. F Clearance Hole Dia. F
7 Suction Strainers Offers front-line fluid filtration in the Tank Features: Die cast aluminum end covers. By-pass valve available (see chart). End caps are designed to provide a positive interlock with epoxy bond to prevent leakage. Rated flow capacity of 5 ft./sec. Suitable with all petroleum base oils & fire resistant hydraulic fluids, coolants & lubricants. OUTLET PORT A (FEMALE PIPE THREAD) 100 MESH (140 MICRON) CLEANABLE STAINLESS STEEL WIRE CLOTH OPTIONAL BY-PASS (SEE CHART) B C D Part Number SS-008P01 SS-008P01- SS-014P016 SS-014P016- SS-0P00 SS-0P00- SS-0P04 SS-0P04- SS-05P0 SS-05P0- SS-116P048 SS-116P048- A Outlet Port Rated Flow Capacity * 8 GPM 8 GPM 14 GPM 14 GPM GPM GPM GPM GPM 5 GPM 5 GPM 116 GPM 116 GPM B Wrench Flat C Overall Length D Outside Dia By-Pass NONE PSI NONE PSI NONE PSI NONE PSI NONE PSI NONE PSI * Measured at 5 ft/sec outlet line velocity. Resulting pressure drop is substantially less than 1/ PSI (1 Hg.) 7
8 Liquid Level Gauges For Continuous reading of Fluid Level and Temperature Standard Line Features: Ultrasonically Welded Transparent Polyamid Case. All Around Visibility of the Fluid Level. Buna-N O-Ring Seals. Zinc Plated Bolts. Suitable for Pressurized Reservoirs to 10 PSI. 5 Model Available with Optional Cast Aluminum Cover to provide Additional Breakage Protection. Includes Thermometer - 5 Model has Blue Fluid, all others have Red Fluid. Descripton A B C D SLLG-0T SLLG-05T SLLG-05T-C SLLG-10T Std. inch w/temp. Std. 5 inch w/temp. Std. 5 inch w/temp. & cover Std. 10 inch w/temp B A Premium Line Features: Borosilicate sight glass compatible with all hydraulic fluids and will not discolor. 0 PSI max working pressure at 50 o F temperature. May be front mounted by threading tank holes or rear mount with provided nuts. Mounting bolts provide 1/16 alignment adjustment to facilitate installation. Low profile body offers wide sight opening for visibility. Machined from solid aluminum bar stock. Includes Internal Thermometer - External Thermometer available, consult factory. C D PLLG-0T PLLG-05T PLLG-10T Descripton Prem. inch w/temp. Prem. 5 inch w/temp. Prem. 10 inch w/temp. A B C D B A C D 8
9 0.8 Gauge Isolators A High Quality Push-to-Read Device that Isolates and Protects your Gauge. Read up to Six Port Signals from a Single Gauge. Magnaloy Gauge Isolators are manufactured from high quality steel hexagonal bar stock and machined to exact tolerances. Pressure is supplied to the gauge only when requested, by pushing the knob. This prevents gauge failure caused by continuous exposure of the gauge to damaging pressure surges and helps extend the life of the gauge and maintain its accuracy. This design provides simple mounting options and an attractive, compact package. Single Position Gauge Isolator Specifications: Push to read. Operating Temperature - 0 o F to 40 o F. 5,000 PSI working pressure. Viton Seals. 1/4 NPT or #4 SAE O-Ring ports. Panel or inline mounting. Maximum panel thickness 5/ Hex. Body () #10- Mounting Hole.56 Deep Panel Mount Pilot.86 Dia NOTE: Max. Stroke Gauge Port Pressure Port Tank Port Six Position Gauge Isolator Specifications: 4.88 Turn to select position, push to read 1 Operating Temperature - 0 o F to 40 o 6 F. 5,000 PSI working pressure. 5 Viton Seals #4 SAE O-Ring ports. o Typ. Pressure Ports Panel mounting. Read up to 6 pressure signals from a single gauge. Ordering Specifications: 1.5 (). Dia. Mounting Holes on.56 Dia. B.C. for 10- Soc. Hd. Scr. Gauge Ports 60 o 60 o Tank Ports 1.88 Hex. Body.5 Dia. Clearance Hole Required Positions Port Type GI-01-SAE GI-01-NPT GI-06-SAE Single Single Six #4 SAE O-Ring 1/4 NPT #4 SAE O-Ring
10 Pressure Switch 1.71 A Dependable Pressure-Sensing Device that Converts a set Hydraulic Pressure to an Electrical Signal - up to THREE Signals in a Single Switch Technical Specifications Operating Characteristics: Adjustable Range: 00 -,600 PSI. Pressure Reset: PSI nominal. Rated Pressure: 4,000 PSI. Burst Pressure: 1,000 PSI. Temperature Rating: -0 o F to 160 o F. Repeatability: % of set pressure. Electrical Characteristics: U.L. Listed Switching Elements..05 Rating: 4 amps, 50 VAC VDC, amps. Options: 1 5 Second and Third independently adjustable switches Factory pre-set to specified pressures 00-1,50 PSI range (L) (15-00 psi reset) 500-4,000 PSI range (H), High cycle unit ( psi reset) 7 8 Pressure Switch Wiring Instructions: 6 4 Switch #1 Switch # Switch # Normally Open Red Red w/one Yellow Stripe Red w/two Yellow Stripes Common 1. Triple Versatility. As many as three White White w/one Yellow Stripe White w/two Yellow Stripes Normally Closed Black Black w/one Yellow Stripe Black w/two Yellow Stripe switching elements can be independently adjusted over the full PS-400 Pressure Switch is tested but NOT pre-set pressure range. (Note: factory will pre-set pressure for a nominal charge) Important! Lock nut torque range: 6-8 in. lbs.. Fluid Compatibility. Viton seal with Teflon back-up ring compatible with most hydraulic fluids. How to Order:. Easy Pressure Adjustment. External PS Single Switch Assembly, adjustment nut is easily accessible for quick pressure reset. NEMA 1 enclosure, Viton Seals, 4. Save Plumbing Cost. Single pressure 00 -,600 PSI Range. tap (1/8 NPT female) serves all three PS Double Switch Assembly, piston mounted microswitches. NEMA 1 enclosure, Viton Seals, 5. Oil Tight Case (NEMA 1) 00 -,600 PSI Range. 6. Standard Conduit Connection. 1/ Triple Switch Assembly, NPT female. PS Easy Installation. Two mounting NEMA 1 enclosure, Viton Seals, holes provided for No. 10 screws. 00 -,600 PSI Range. 8. Positive Locking. Pressure Adjusting To specify pre-set pressure(s), note setting(s) after part number. Screw. For optional operating ranges specify (L) or (H) after part number. 10
11 Modular O-Rings A Cost Saving, Easy to Identify, Inventory of Commonly used Buna-N or Viton O-Rings. Sized for Vickers Industrial Valves. How to Order: ORK-1000 ORK-1001 Buna-N O-Ring Kit Vitron O-Ring Kit Each kit contains the following size and quantities of either Buna-N or Viton O-Rings: Plug Number Quantity Buna-N Vicker s Part No. Viton Vicker s Part No. Plug Number Quantity Buna-N Vicker s Part No. Viton Vicker s Part No
12 Motor Dampening Bars Standard Features: Reduced vibration and structure borne noise. Bolt or weld down design for easy installation. Four sizes accommodate NEMA frames 056C through 405TC. Vulcanized rubber to metal bond. No metal to metal contact. Completely drilled and tapped for NEMA frame motors. Optional Weld Pad Kit available for welding to reservoir surface. Shipped in sets of bars, (Order 1 Set for Each Motor). T D L 1.75".50" Dimensional Data NEMA Frame Size L W A B D T Weight per Set MDB C, 14TC, 145TC 1/ 8 6 1/ /16 5/16-NC 8 lbs. MDB-15 TC, 4TC, 1TC, 15TC /4 /16 /8-16NC 11 lbs. MDB TC, 56TC, 84TC, 86TC 16 1/4 14 /4 1 1/4 /16 1/-10UN lbs. MDB TC, 6TC, 64TC, 65TC, 404TC, 405TC 1 1 1/4 17 1/ 1/16 5/8-11NC /4-10NC 0 lbs. Note: If Motor Dampening Bars are welded directly to reservoir, they must be welded only on the extreme ends (across Dim. W) to avoid excessive heat at the rubber to metal interface. Note: Due to product improvement, specifications are subject to change without notice. 1
13 Motor Dampening Bars Weld Pad Kit Standard Features: Eliminates drilling and tapping of reservoir surface. Eliminates possible heat damage to rubber and loss of vulcanized bond on the motor dampening bar. Added motor height for ease of plumbing. Order 1 kit per set of Dampening bars ordered. Each kit contains a set of 4 pads. T H Dimensional Data S S Use With Motor Dampening Bar Number S T H Weight per Kit MWP MDB , MDB-15 1/-1NC 1/ lbs. MWP54-86 MDB /-1NC 1/ 5 lbs. MWP4-405 MDB4-405 /4-10NC /4 7 lbs. The weld pads are designed to weld directly to the reservoir surface and provide tapped mounting holes for the Motor Dampening Bars. This procedure allows the mounting of the Motor Dampening Bars without welding directly on the bar or drilling and tapping of the reservoir surface. Any rubber to metal bond can be damaged if the interface point of rubber and steel reaches a temperature of 500 o F. Welding adjacent to the rubber to metal interface is virtually impossible without exceeding this 500 o F threshold and precipitating the separation of the rubber to metal bond. Because of the potential separation problem, we insist on welding only the extreme ends of the Motor Dampening Bars. We highly recommend the utilization of the Weld Pad Kit to preclude the possibility of damage to the rubber to metal vulcanization, or more specifically to completely isolate the rubber to metal interface from the heat of welding. Note: Due to product improvement, specifications are subject to change without notice.
14 Make the Connection with... Whatever your Fluid Power Unit needs, magnaloy has the products to keep you connected. Flexible Drive Couplings Top-of-the-line magnesium couplings are lighter, yet stronger than either cast iron or aluminum. They also offer better corrosion resistance and easier handling. Pump/Motor Mounts Precision machined aluminum & custom steel pump/motor mounts directly connect the motor and pump while ensuring accurate shaft alignment and enclosing the coupling. Vertical and horizontal models readily available from stock. PM 0 Couplings Economical PM-0 Iron Powder Couplings have long lasting nitrile, hytrel or urethane inserts. Double set screws give excellent gripping power. Magnaloy Hydraulic Bar Manifolds & Accessories Complete line of inline Bar Manifolds, Subplates, Cover Plates, Valve Adaptors, Integrated Circuit Manifolds, and Accessories to make the design and fabrication of Hydraulic Circuitry simple and easy. Wide range of sizes include: D0, D05, D05H & D08 in aluminum and steel with ports available in SAE,, BSPP, and BSPT styles. Custom design and fabrication also available, consult factory. Accessories Filler Breather Adaptors, Filler Breathers, Reservoir Flanges, Suction Strainers, Gauge Isolators, Liquid Level Gauges, Modular O-Ring Kits. Rod End Couplers Two models of accurately machined high tensile cylinder rod end alignment couplers offer 7 o or 10 o spherical and 1/8 parallel misalignment capabilities. Magnaloy Reservoirs & Reservoir Accessories Magnaloy offers a complete line of standard reservoirs and reservoir accessories. In addition, we offer custom reservoir fabrication to meet our customer specific needs. Reservoirs accessories such as Clean Out Covers and SAE Couplings are available for the do-it-yourself reservoir manufacturer Magnaloy Pressure Switch Pressure Sensing switch capable of sensing up to three () separate pressures. Each sensor is externally independently adjustable from 00 to 4000 psi. Viton seals provide wide fluid compatibility range. 1
Pump/Motor Mounts. magnaloy coupling company P.O. Box 455 Alpena, MI Leading the Industry in Quality, Service and Availability
Pump/Motor Mounts Leading the Industry in Quality, Service and Availability INDEX: Magnaloy General Information...2 Flexible Drive Couplings...2 SAE & Metric Mount Dimensions...3 NEMA C Motor Dimensions...4
More informationSECTION 5 MAGNALOY RESERVOIR ACCESSORIES
Reservoir Accessories SECTION MAGNALOY RESERVOIR ACCESSORIES NOTE: Due to Magnaloy s policy of continuous improvement, specificaitons are subject to change without notice. Check with the factory or our
More informationMagnaloy Products Catalog North America s Favorite Source for Fluid Power Accessories
Magnaloy Products Catalog North America s Favorite Source for Fluid Power Accessories A Division of Douville Johnston Corporation Fax: 989 35-190 Catalog No. PC0910 2010 Magnaloy Coupling Co. http://www.magnaloy.com
More informationMB SERIES SMB SERIES MINIATURE TANK BREATHERS MINIATURE TANK BREATHERS ACCCESSORIES. Phone (608) Fax (608)
G1 MB SERIES MINIATURE TANK BREATHERS 10 Micron Filtration (Nominal) Shatter Resistant Plastic Construction Temperatures Up to +225 F Model A B Number Thread Size Overall Height MB-02-10 1/4 NPT 1.8 MB-03-10
More informationmagnaloy coupling company 501 Commerce Drive Alpena, MI Effective Oct 7, 2013 Subject to change upon notice
LIST PRICES Effective Oct 7, 2013 Subject to change upon notice Flexible Drive Couplings PM 90 Couplings Pump/Motor Mounts Hydraulic Manifolds & Manifold Accessories Reservoirs Reservoir Accessories Rod
More informationThreaded Adapters for Creating Tank Breathers. Element Attachment. Thread. O-Ring (Buna-N) Aluminum Construction. Male Pipe.
Reservoir Breathers Breathers are available in a variety of styles, materials and sizes. Breathers provide clean airflow into reservoirs and other storage containers where there is an exchange of air during
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationQUICK INDEX. Series SMA Aluminum. Pancake and conventional lengths 1 1/8 thru 3 bore. Series SMS Solid Stainless
QUICK INDEX A U R O R A A I R P R O D U C T S Series SMA Aluminum Pancake and conventional lengths /8 thru 3 bore Series SMS Solid Stainless Pancake and conventional lengths for hostile environments Series
More informationLow Pressure Filters. Low Pressure Filters LOW PRESSURE FILTERS
Low Pressure Filters Low pressure filters are the most common type of filter found in hydraulic circuits used most often in return line applications. Low Pressure Filters Donaldson low pressure filters
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationHIGH PERFORMANCE FILTERS INDUSTRIAL HYDRAULIC AND LUBRICATION APPLICATIONS
HIGH PERFORMANCE FILTERS INDUSTRIAL HYDRAULIC AND LUBRICATION APPLICATIONS Microfil III media are made from micro-fine glass fibers which are randomly laid into a multilayered web. The media are impregnated
More informationhydroline filters and accessories
hydroline filters and accessories 12 Hydroline Filters and Accessories SECTION 12 Prices Suction Strainer Filters Inline Spin on Filter Tank Immersed Gauge Indicators Level Gauge Sight Level Gauge Threaded
More informationaccessories Hydroline Filters and Accessories hydroline filters & 14 hydroline filters & accessories Filters Inline Spin on
hydroline filters & accessories Hydroline Filters and Accessories hydroline filters & accessories Prices Sec:2 Suction Strainer Sec:4 Filters Inline Spin on Sec:5 Filter Tank Top Sec:9 Gauge Indicators
More informationAccessories. Service, In-Line and Reservoir. Accessories ACCESSORIES
Accessories Donaldson offers an extensive line of accessories for hydraulic circuits, lines and reservoirs that will help you maintain proper ISO cleanliness levels. Accessories Service, In-Line and Reservoir
More informationPHONE: 937/ FAX:
Magnetic Tank Cleaners Multi Magnet Standard or Heavy Duty Lenz magnetic tank cleaners pick up material that ordinary filters miss and thus maintain cleaner oil. The cleaner the oil; the less problems
More informationBreathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /.
BF...3 & BF...4 Series Maximum flow rate - 31 scfm / 230 gpm at 0.04 bar Epoxy coated steel cap Zinc-plated internals Threaded connection Pressurized breather with relief valve (optional - BF3 only) Phenolic
More informationModuflow. ILP and RFP Low Pressure Filters. Series
Moduflow ILP and RFP Low Pressure Filters Series 27 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile
More informationA Filtration Primer. Filter Elements. High Pressure Filters. Tank-Mounted, Return Line and Medium Pressure Filters. Water Service Filters
A Filtration Primer Filter Elements High Pressure Filters Tank-Mounted, Return Line and Medium Pressure Filters Water Service Filters Section 6 Reservoir Accessories SCHROEDER INDUSTRIES 259 Principles
More informationPT Series Tank Top Filters
Tank Top Filters 9 Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions. Build global confidence. Redefine new limits.
More informationAccessories. Service, In-Line and Reservoir. Accessories ACCESSORIES
Accessories Donaldson offers an extensive line of accessories for hydraulic circuits, lines and reservoirs that will help you maintain proper ISO cleanliness levels. Accessories Service, In-Line and Reservoir
More informationMedium Pressure Filters
Medium Pressure Filters Medium pressure filters can be used in applications up to psi (379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters Donaldson Duramax
More information180VC WITH B5 FLANGE / M ,6 0, / M l 5,0 0,7 192 / M ,0 0,9 223
METRIC (IEC) FRAME THYRISTOR RATED DC METRIC (IEC) FRAME MOTORS IP54 These metric dimensioned motors are built to IEC 34-1 electrical and mechanical standards. The IEC 63 and smaller frames are stocked
More informationDC MOTORS NEMA FRAME SCR RATED
NEMA FRAME SCR RATED NEMA FRAME MOTORS SCR RATED High voltage permanent magnet DC motors are typically used with an SCR (thyristor) controller in applications requiring adjustable speed and constant torque
More informationTABLE OF CONTENTS. Accessories. Filler Breather 7 Filler Heads 11 Foot Brackets 6 J. Jaw Couplings 9 Jaw Couplings - Dimensions/HP ratings 8 S
accessor i es TABLE OF CONTENTS Accessories F Filler Breather 7 Filler Heads 11 Foot Brackets 6 J Jaw Couplings 9 Jaw Couplings - Dimensions/HP ratings 8 S Strainers 12 Stroke Limiter 3 Subplates 10 BORE
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock 1 1/8, 1, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of
More informationHIGH PRESSURE FILTERS
HIGH PRESSURE FILTERS Series DF & LF Pressures to 6 PSI Flows to 18 GPM APPLICATION HYDAC DF & LF In-line High Pressure Filters are designed for use on hydraulic power units, machine tools, plastics machinery,
More informationCatalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA
Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.
More informationMagnaloy Products Catalog North America s Favorite Source for Fluid Power Accessories
agnaloy Products Catalog North America s Favorite Source for Fluid Power Accessories magnaloy coupling company 50 Commerce Drive Alpena, I 49707 989 356-286 A Division of Douville Johnston Corporation
More informationSmith-Blair OMNI Coupling System Advantages:
OMNI Coupling System SmithBlair s OMNI Coupling System utilizes the tremendous tensile strength of ductile iron to your best advantage. Applying the principles of space age technology to engineer the OMNI
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationSwitches for Pressure to 8000 psig, Vacuum, Differential, or Level Control with General Purpose, Watertight or Explosion-Proof Enclosures
S-SERIES Pressure Switches Switches for Pressure to 8000 psig, Vacuum, Differential, or Level Control with, or s Features: Set point repeatability, +1% of operating range. All wiring terminals, adjustments
More informationGraphic Symbol 100 L 140 G25. R -M V 4 4 G P E. Perm.* 2 Magnet. Differential Pressure P. Connection. R: BSP.F Thd. O: Not Fitted.
ollowing are the Accessories used in the Hydraulic Systems iller Breather Model Code Method of Representation: According to Model Code in the above table. Suction Strainer Model Code SS 15 evel Gauge iltration
More informationIFP S.A.E. 4 BOLT FLANGE FITTINGS
3¼ 4 5 IFP S.A.E. 4 BOLT FLANGE FITTINGS 2-214 2-218 2-222 2-225 2-228 2-232 2-237 Supplied complete with mounting hardware (O-ring, Socket Head Cap Screw & Hi- Collar Lock Washer ) J 1.2 IFP FILLER /
More informationSERIES G603 STANDARD FRONT MOUNT GAGE
LIQUID LEVEL GAGE -FRONT MOUNT, FLEXIBLE, CLEAR Economical, versatile and durably constructed. Available in mounting lengths to 600 inches (15240mm). Practical where oil level readings are necessary on
More informationValves. E Valves. Multiple Hydraulic System Applications
s Multiple Hydraulic System Applications Parker Check s are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid back pressure. Offered
More informationOil Solutions. GA/BGAH Series Medium Pressure Filters. Global Filtration Technology. Filtration.
Oil Solutions Medium Pressure Filters Filtration Global Filtration Technology www.oilsolutions.com.au Features/Applications for Medium Pressure Inline Filters GA Series Pressures to 750 PSI Flows to 100
More informationCatalog PowrFlowTM PVX Vane Pumps
Catalog PowrFlowTM PVX Vane Pumps Your source for vane pumps for the most demanding applications. What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane Pumps deliver
More informationControl Valves & Valve Accessories
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Stainless Steel 0- Fully Ported valve with M5 threads available- contact factory Viton is a registered trademark
More informationFLUID HANDLING: Drum Filter Cart
FLUID HANDLING: Drum Filter Cart This cart is ideal for pre-cleaning, protecting, and transferring oil from a conveniently attachable, secured drum. A drum adapter kit with a desiccant breather is included
More informationFLUID HANDLING: Drum Filter Cart
FLUID HANDLING: Drum Filter Cart This cart is ideal for pre-cleaning, protecting, and transferring oil from a conveniently attachable, secured drum. A drum adapter kit with a desiccant breather is included
More information12AT/50AT Series. Spin-On Filters. Global Filtration Technology
1AT/5AT Series Spin-On Filters Global Filtration Technology 1 1AT/5AT Series Applications for Spin-On Filters n Mobile Equipment n Hydrostatic Drives n Industrial Power Units n Reservoir Breathers Often,
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationThe following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves.
VALVE ACTUATORS The following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves. One of the most versatile items in the Clippard line. Permits wide circuit
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More information12AT/50AT Series Spin-On Filters
1 Applications for Mobile Equipment Hydrostatic Drives Industrial Power Units Reservoir Breathers Often, economic conditions dictate what type of filter is used on a piece of equipment. When costs are
More informationPneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves
Quic-Pics Catalogue Pneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves Contents: Product Line Overviews 2 Manually Operated Valves 5 Pushbuttons 6 Toggle Switch 8 Knob
More informationPump/Motor Mounts. magnaloy coupling company 501 Commerce Drive Alpena, MI
Pump/Motor Mounts Leading the Industry in Quality, Service and Availability INDEX: Magnaloy General Information...2 Flexible Drive Couplings...2 SAE & Metric Mount Dimensions...3 NEMA C Motor Dimensions...4
More information1/8 NPT (F) 1/8 NPT (F)
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Features l Compact size (.5 OAL) l 4 Porting configurations l High flow l Single stem design l Plumbing
More informationPowrFlow PVX Vane Pumps
PowrFlow PVX Vane Pumps POWRFLOW PVX VANE PUMPS YOUR SOURCE FOR VANE PUMPS FOR THE MOST DEMANDING APPLICATIONS What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane
More informationModuflow Series IL2/RF2/CF2 Low Pressure Filters
IL/RF/CF Low Pressure Filters 35 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile filter available
More informationEAGLE SERIES VALVES E3 AND E4 SERIES. A Solenoid coil is available in AC or. B Manual override plunger provides. C Valve body is tapped #10-32 and may
EAGLE SERIES VALVES E3 AND E SERIES A A Solenoid coil is available in AC or DC with LED and plug-in connector or wire leads. B Manual plunger provides valve actuation with no electrical power. B C Valve
More information12CS/50CS Series. Coreless Spin-on Filters
12CS/5CS Series Coreless Spin-on Filters 65 12CS/5CS Series Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
More informationPressure Controller. Cataloge K Code Characteristics Index. K00-2 Pressure Controller Brief Introduction
K Pressure Controller Cataloge Code Characteristics Index K00-2 Pressure Controller Brief Introduction KC32 Screw Tube Differential Pressure Controller K01 KY10 Bellows Type Differential Pressure Controller
More informationPerformance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-0547 Features Single stem design Compact size Four input options Numerous porting configurations Fully ported
More informationE. Clark & Associates 10 Brent Drive Hudson, MA Tel. 978 / Fax 978 / Two Switch Output Hex Screw Adjustment
CLARK SOLUTIONS 400 Series, Pressure, Vacuum, Diff. Pressure & Temp. Switches 1,2 & 3 Switch output, Adjustable Ranges 30 Vac to 6000 PSI, -180 to 650 o F DESCRIPTION The 400 Series is a versatile family
More informationPRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE
PROJECT NAME LOCATION PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2-1/2 in. (65 mm) through 18 in. (450 mm) Control
More informationPRESSURE RELIEF / SUSTAINING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART
More informationBRUTE II 4-VALVE Manifold
gauges Leak Detectors Detectors 20 BRUTE II 4-VALVE Manifold The Brute II 4-Valve Test Charging Manifold provides the flow that s proven faster than any conventional manifold. The aluminum alloy is forged
More informationLow & High Pressure ProGuard Filters
56 ±.2 (2.2 ±.5) ø13 +1.5 (5.12 +.6 ) INDICATOR PLUG 193 (7.6) 14 (5.51) 95 (3.74) LABEL 1 5/8-12UNF IN. OR G 1 1/4 PORT SAE-2 PORT 2 PL'S 196 (7.72) 58 (2.28) ø13.2 (5.13) L (4 Low & High Pressure ProGuard
More informationSeries PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2661-CD/US zp2 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference Only
More informationFlexible Drive Couplings
leible Drive Couplings INDEX: agnaloy Coupling Designeatures... Load Lock Design... Radial Lug Design... Lug Design Comparisons... Premiium leible Drive Couplings... Performance Specifications... Dimension
More informationGEORGIAN EQUIPMENT LTD.
GEORGIAN EQUIPMENT LTD. A COMPREHENSIVE SELECTION OF HIGH QUALITY HYDRAULIC PRODUCTS For more information 705-325-3431 E Electric Motor Pump Adaptors - PAE Series 5 F Filler Breathers - FB Series 15 Filter
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationFILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
More informationHIGH PRESSURE BALL VALVES
HIGH PRESSURE BALL VALVES HIGH PRESSURE BALL VALVES TABLE OF CONTENTS Page Description 3 Valve Design 3 Product Features 3 Available Options 3 2-Way with NPT and SAE Connections 4 2-Way with SAE Split
More information1500 Series. Roller Bearing Gear Pumps and Motors (Bi-Rotational) High Performance Features: Hydreco
Roller Bearing Gear Pumps and Motors (Bi-Rotational) High Performance Features: The 1500K Series Pump/Motor utilizes the many design and application features of the widely accepted HYDRECO Series modern
More informationALTITUDE CONTROL VALVES FOR ONE WAY FLOW
PROJECT NAME LOCATION ALTITUDE CONTROL VALVES FOR ONE WAY FLOW INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1
More informationMid-West Instrument. Piston Type Model 220. Hazardous Locations. Indicating / Non-Indicating Differential Pressure Switch or Transmitter
BULLETIN NO. 220/11 (SUPERSEDES BULLETIN NO. 220/06) Mid-West Instrument Piston Type Model 220 Hazardous Locations Indicating / Non-Indicating Differential Pressure Switch or Transmitter Low cost piston
More informationCOMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES 2.01 COMBINATION RESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVE
PROJECT NAME LOCATION COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900
More informationLow Profile J Series Power Unit with Vane Pump
Low Profile J Series Power Unit with Vane Pump READ ALL INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING
More informationMINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM
MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM Muncie Power Products OPTIMUM Series gear pumps/motors offer premier performance for a wide variety of applications across several industries.
More informationENGINEERING DATA. Quick Reference Chart. Variable Volume Vane Pumps Models SV-20 & SV-25 Flange & Subplate Mounted. Industrial Hydraulics
ENGINEERING DATA Industrial Hydraulics Variable Volume Vane Pumps Models SV-20 & SV-25 Flange & Subplate Mounted SYMBOL Quick Reference Chart GPM @ MAXIMUM PRESSURE THEORETICAL INPUT HP MODEL 100 PSI &
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationPremium Flexible Drive Couplings
Premium Flexible Drive Couplings agnaloy is the original lightweight, heavy-duty flexible drive coupling. Light weight magnesium construction makes agnaloy couplings 76% lighter than cast iron and 36%
More information3/8 & 1/2 NPT. with 3/8 and 1/2 NPT ports for 4 Way - 2 & 3 Position see Pg locate counterbores in body to control static squeeze on seals.
8 SERIES /8 Ported Air Valves 1/ Ported Air Valves /8 & 1/ 1, 1A, 1B & 8 Series Note! Spring return & spring centered models NOT suitable for dry air service. Features & Way - Position. Way - &. operator
More information12CS/50CS Series Coreless Medium Pressure Filters
12CS/5CS Series Coreless Medium Pressure Filters 65 12CS/5CS Series Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
More informationRF4 Series. Return Line Filters
RF Series Return Line Filters 7 RF Series Applications for RF Filters Mobile Equipment Mining Equipment Industrial Power Units Automotive Specified Equipment The RF is a rugged, industry proven filter
More informationJHawk Instrument Inc. warrants the
Warranty Statement JHawk Instrument Inc. warrants the component parts and workmanship of its products under normal use and service for a period of one year from the date of the shipment. All obligations
More informationTransportation Products
Transportation Products Butterfly Valves Hopper Tees Actuators Accessories A Name You ve Trusted for Years... Resilient Seated Butterfly Valves 400 & 480 Series 1 Piece Body Design This economical, resilient
More informationRosemount 8750WA Magnetic Flowmeter System For Water and Wastewater Industries
Product Data Sheet January 214 813-1-475, Rev FA Rosemount 875WA Magnetic Flowmeter System For Water and Wastewater Industries THE 875WA MAGNETIC FLOWMETER Rosemount reliability in a customized offering
More informationMedium Pressure Filters
Medium Pressure Filters Medium pressure filters can be used in applications up to 2 psi (1379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters MEDIUM PRESSURE
More informationTable of Contents. Page. See Catalog and Product Updates on our Website
2 Table of Contents Page Sapphire Orifice Assemblies... 3-5 Metal Orifice Assemblies - Barb Connections... 6-7 Metal Orifice Assemblies - NPT Connections... 8-9 Metal Orifice Assemblies - Inserts... 10-13
More informationFlexible Drive Couplings
Flexible Drive Couplings INDEX: agnaloy Coupling Design Features...2 Load Lock Design...2 Radial Lug Design...2 Lug Design Comparisons...2 Premium Flexible Drive Couplings...3 Performance Specifications...3
More informationW91/W94 Series TEMPERATURE REGULATORS. Self-Operated Temperature Regulators. Design & Operation W91 Non-Indicating W94 Dial Thermometer
Design & Operation W91 Non-Indicating W94 Dial Thermometer Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company CAPILLARY
More informationPRESSURE REDUCING CONTROL VALVE
PRESSURE REDUCING CONTROL VALVE 06/08 Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) X P/L Standard Components 1 Main
More informationMid-West Instrument. Diaphragm Type Model 240. Hazardous Locations. Indicating / Non-Indicating Differential Pressure Switch or Transmitter
BULLETIN NO. 240/11 (SUPERSEDES BULLETIN NO. 240/06) Mid-West Instrument Diaphragm Type Model 240 Hazardous Locations Indicating / Non-Indicating Differential Pressure Switch or Transmitter Field wireable
More informationMid-West Instrument. Piston Type Differential Pressure Gauges Switches & Transmitters Model 124
BULLETIN NO. 124/12 (SUPERSEDES BULLETIN NO. 124/11) Mid-West Instrument Piston Type Differential Pressure Gauges Switches & Transmitters A low cost differential pressure gauge for use in measuring the
More informationPort Flow Rate/ Function Series Actuators Page Number Size Factor
Section dex Port Flow Rate/ Function Series Actuators Page Number Size Factor 0- Cv = 0.05 Way Modular Solenoid. -. & to Way Manifold /8 NPT Cv = 0. Way, Position Modular /8 NPT Cv = 0.05 Way Hex Solenoid.5.6
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationTransportation Valves
Transportation Valves A Name You ve Trusted for Years... 780 Series Butterfly Valves Features: Available in sizes 3 thru 6 One handle fits sizes 3 thru 6 Integrated 180º notch plate eliminates mounting
More informationEZ-View Flow Meters. General Design Features OPERATING PRINCIPLE
General Design Features 9 8 5 6 7 4 3 2 1 10 OPERATING PRINCIPLE The EZ-View Flow Meter is a variable area instrument. A precisionmolded, sharp-edged Orifice 1, located within the Piston Assembly, 2 forms
More informationDouble Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company
PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce
More informationClippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More informationSOLENOID CONTROL VALVE
PROJECT NAME LOCATION SOLENOID CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 4 in. (100 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
More informationFLUID POWER GROUP PRODUCT CATALOG / MARADYNE.COM
FLUID POWER GROUP PRODUCT CATALOG 800-537-7444 / MARADYNE.COM CAPABILITIES Filter Manufacturing Assembly Complex Manufacturing Injection & Roto Molding Electric Motors & Fans ISO 5011 Air Filter Lab PRODUCTS
More informationMid-West Instrument. Diaphragm Type Differential Pressure Gauge & Switch Model 130. Shown here with Range 0-5 H2O
Diaphragm Type Differential Pressure Gauge & Switch BULLETIN NO. 130/11 (SUPERSEDES BULLETIN NO. 130/02) is a rugged general purpose differential pressure gauge with a 4-1/2" round dial. Common Applications:
More informationAGS/MPN Series. Medium Pressure Filters. Global Filtration Technology
Medium Pressure Filters Global Filtration Technology 63 Features/Applications for Medium Pressure Inline Filters AGS Series Rated Working Pressure 1000 PSI Rated Static Pressure 1500 PSI Flows to 25 GPM
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More information