ATLAS FM FULL METRIC INSERTS CATALOG

Transcription

1 TLS F FULL ETRI INSERTS TLOG 915

2 TLS F FULL ETRI LIND THREDED INSERTS TLS F metric blind threaded inserts offer ideal solutions for blind attachment applications where only one side of a panel is accessible for assembly. These inserts install quickly and easily from the accessible front side with only a single mating screw required to complete final component attachment. These fasteners are ideally suited for tubing, extrusion, and other similar types of single sided applications. Install into metric size round or hex holes. vailable in thread sizes 3 to 10. vailable in a variety of head styles: Flat, thin, and countersunk. vailable in a variety of body types: Round (smooth and knurled), half hex, and full hex. vailable in a variety of materials: Steel, stainless steel, aluminum, and brass. PRT NUER KEY E F K S ZI Finish ode: ZI - RoHS compliant zinc clear per ST 633, Fe/Zn 8, Type V Z - RoHS compliant zinc yellow per ST 633, Fe/Zn 8, Type VI ZN - Zinc nickel here indicates closed end thread. S here indicates sealant under the head. ode: The number shown is the max grip in millimeters. Thread ode. Unified threads available on special order. aterial ode: = 300 Stainless Steel (Limited availablity. all for more info) S = Low arbon Steel (Standard) = lloy No. 260 rass (vailable on special order) = 6053-T4 or 6061-T4 luminum (vailable on special order) ody Type: H = Half hex shank R = Round, smooth K = Round, knurled HH = Full hex shank, round counterbore Head Style: F = Flat T = Thin = ountersunk F-2 tlas Engineering.

3 TLS F FULL ETRI LIND THREDED INSERTS INDEX Full etric lind Threaded Inserts TYPE EFR - FLT HED ROUND ODY 4 Flat head design for high load applications. TYPE ETR - THIN HED ROUND ODY 4 llows near-flush installations with no need for special hole preparations. TYPE EFK - FLT HED KNURLED ROUND ODY 5 Flat head design for high load applications. Knurled body for high torque applications. TYPE ETK - THIN HED KNURLED ROUND ODY 5 llows near-flush installations with no need for special hole preparations. Knurled body for high torque applications. TYPE EFH - FLT HED SEIHEX ODY HEX OUNTERORE 6 Flat head design for high load applications. Semihex body for improved torque-out resistance. TYPE ETH - THIN HED SEIHEX ODY HEX OUNTERORE 6 llows near-flush installations with no need for special hole preparations. Semihex body for improved torque-out resistance. TYPE EFHH - FLT HED HEX ODY ROUND OUNTERORE 7 Flat head design for high load applications. Full hex feature for high torque applications. TYPE ETHH - THIN HED HEX ODY ROUND OUNTERORE 7 llows near-flush installations with no need for special hole preparations. Full hex feature for high torque applications. TYPE ER - OUNTERSUNK HED ROUND ODY 8 ountersunk head allows insert to be installed flush with sheet surface. TYPE EK - OUNTERSUNK HED KNURLED ROUND ODY 8 ountersunk head allows insert to be installed flush with sheet surface. Knurled body for high torque applications. aterial and Finish Specifications 9 TLS Tool Selector Guide 9 Tooling and Installation Value dded Options 12 F-3

4 TLS F FULL ETRI LIND THREDED INSERTS TYPE EFR - FLT HED ROUND ODY losed End Hole Size ll dimensions are in millimeters. Thread Type Open losed Hole Size Size x Grip In Sheet Pitch Steel Range ±0.25 ±0.25 ±0.13 ax. Ref. ±0.25 ±0.25 ±0.13 ax. Ref X 0.5 EFRS x 0.7 EFRS x x 1 8 x 1.25 EFRS EFRS EFRS x 1.5 EFRS TYPE ETR - THIN HED ROUND ODY losed End Hole Size ll dimensions are in millimeters. F-4 Thread Type Open losed Hole Size Size x Grip In Sheet Pitch Steel Range ±0.25 ±0.25 ±0.13 ax. Ref. ±0.25 ±0.25 ±0.13 ax. Ref X 0.5 ETRS x 0.7 ETRS x x 1 8 x 1.25 ETRS ETRS ETRS x 1.5 ETRS

5 TLS F FULL ETRI LIND THREDED INSERTS TYPE EFK - FLT HED KNURLED ROUND ODY losed End Hole Size ll dimensions are in millimeters. Thread Type Open losed Hole Size Size x Grip In Sheet Pitch Steel Range ±0.25 ±0.25 ±0.13 ax. Ref. ±0.25 ±0.25 ±0.13 ax. Ref X 0.5 EFKS x 0.7 EFKS x x 1 8 x 1.25 EFKS EFKS EFKS x 1.5 EFKS TYPE ETK - THIN HED KNURLED ROUND ODY losed End Hole Size ll dimensions are in millimeters. Thread Type Open losed Hole Size Size x Grip In Sheet Pitch Steel Range ±0.25 ±0.25 ±0.13 ax. Ref. ±0.25 ±0.25 ±0.13 ax. Ref X 0.5 ETKS x 0.7 ETKS x x 1 8 x 1.25 ETKS ETKS ETKS x 1.5 ETKS F-5

6 TLS F FULL ETRI LIND THREDED INSERTS TYPE EFH - FLT HED SEIHEX ODY HEX OUNTERORE losed End Hex Hole Size ll dimensions are in millimeters. Thread Type Open losed Hex Size x Grip Hole Size Pitch Steel Range ±0.25 ±0.25 ±0.13 ax. Ref. ±0.25 ±0.25 ±0.13 ax. Ref X 0.5 EFHS x 0.7 EFHS x x 1 8 x 1.25 EFHS EFHS EFHS x 1.5 EFHS Transform round holes to hexagonal holes. See RIV990 and RIV991 tools on page TYPE ETH - THIN HED SEIHEX ODY HEX OUNTERORE losed End Hex Hole Size ll dimensions are in millimeters. Thread Type Open losed Hex Size x Grip Hole Size Pitch Steel Range ±0.25 ±0.25 ±0.13 ax. Ref. ±0.25 ±0.25 ±0.13 ax. Ref X 0.5 ETHS x 0.7 ETHS x x 1 8 x 1.25 ETHS ETHS ETHS x 1.5 ETHS Transform round holes to hexagonal holes. See RIV990 and RIV991 tools on page 11. F-6

7 TLS F FULL ETRI LIND THREDED INSERTS TYPE EFHH - FLT HED HEX ODY ROUND OUNTERORE losed End Hex Hole Size ll dimensions are in millimeters. Thread Type Open losed Hex Size x Grip Hole Size Pitch Steel Range ±0.25 ±0.25 ±0.13 ax. Ref. ±0.25 ±0.25 ±0.13 ax. Ref X 0.5 EFHHS x 0.7 EFHHS x x 1 8 x 1.25 EFHHS EFHHS EFHHS x 1.5 EFHHS Transform round holes to hexagonal holes. See RIV990 and RIV991 tools on page 11. TYPE ETHH - THIN HED HEX ODY ROUND OUNTERORE losed End Hex Hole Size ll dimensions are in millimeters. Thread Type Open losed Hex Size x Grip Hole Size Pitch Steel Range ±0.25 ±0.25 ±0.13 ax. Ref. ±0.25 ±0.25 ±0.13 ax. Ref X 0.5 ETHHS x 0.7 ETHHS x x 1 8 x 1.25 ETHHS ETHHS ETHHS x 1.5 ETHHS Transform round holes to hexagonal holes. See RIV990 and RIV991 tools on page 11. F-7

8 TLS F FULL ETRI LIND THREDED INSERTS TYPE ER - OUNTERSUNK HED ROUND ODY losed End 90 ll dimensions are in millimeters. Thread Type Open losed Hole Size Size x Grip In Sheet Pitch Steel Range ±0.25 ±0.25 ±0.13 ax. Ref. ±0.25 ±0.25 ±0.13 ax. Ref X 0.5 ERS x 0.7 ERS x x 1 8 x 1.25 ERS ERS ERS x 1.5 ERS Hole Size TYPE EK - OUNTERSUNK HED KNURLED ROUND ODY losed End 90 ll dimensions are in millimeters. Thread Type Open losed Hole Size Size x Grip In Sheet Pitch Steel Range ±0.25 ±0.25 ±0.13 ax. Ref. ±0.25 ±0.25 ±0.13 ax. Ref X 0.5 EKS x 0.7 EKS x x 1 8 x 1.25 EKS EKS EKS Hole Size x 1.5 EKS F-8

9 TLS F FULL ETRI LIND THREDED INSERTS TERIL ND FINISH SPEIFITIONS ode aterial Threads Standard Finish S luminum Low arbon Steel Stainless Steel rass etric, 6H per SE 1.13 None etric, RoHS compliant zinc clear per ST 633, 6H per SE 1.13 Fe/Zn8, Type V etric, 6H per SE 1.13 etric, 6H per SE 1.13 Passivated None TLS TOOL SELETOR GUIDE Various applications may affect TLS insert installation. We recommend this tooling guide be used as a reference only. Please contact our TLS ustomer Service department with questions regarding your specific installation tooling requirements. The installation tool can reliably install all material types. The installation tool is rated for Steel, luminum, ONEL, and rass. The installation tool conditions must be optimal for reliable installation. This combination of tool and insert is not recommended. TLS F INSERTS Insert Thread RIV939 Type Size RIV938 RIV912 RIV942 RIV998V RIV938S RIV916 RIV916 RIV790 RIV990 RIV991 EF #4-40, 3 EF #6-32 EF #8-32, 4 EF #10, 5 EF 1/4, 6 EF 5/16, 8 EF 3/8, 10 EF 1/2, 12 SUGGESTED SSELY TORQUE VLUES TO PRODUE ORRESPONDING OLT LODS SE Grade 5 olts lamp Load lamp Load ssembly Torque (in lbs.) ssembly Torque (N m) Thread Size (lbs.) (kn) Dry Plated Dry Plated #4-40 / #6-32 / #8-32 / # #10-32 / /4-20 / / /16-18 / / /8-16 / / ONEL is a registered trademark of Special etals orporation. F-9

10 TLS F FULL ETRI LIND THREDED INSERTS INSTLLTION TOOLS For more information visit TLS RIV938 PULL-TO-PRESSURE TOOL The pressure controlled installation of the TLS RIV938 pull-to-pressure tool assures consistent installations and improves mandrel life. Pressure controlled setting allows the installation of the same insert into various material thickness without any adjustment of the tool. Pull-to-pressure feature extends mandrel life. andrel is a hardened socket head cap screw which is easy to replace when necessary. The auto-reverse feature after installation increases production rate. Eliminates over installing and double installing ensuring fastener thread integrity. RIV938 ( tool only) - nose pieces sold separately. RIV938-T (metric kit) - includes a gun and tooling to install thread sizes 4 through 10. Tool Specifications ir pressure regulator. Thread Sizes Weight (1) ir (2) ir Use 3 to 10 (female threaded inserts) 4 to 8 (male threaded inserts) inimum ax. xial ax. Hose Size I.D. Pulling Load Stroke 1.8 kg. 6 R 5 liters 9.5 mm 19 6 R 6.5 mm (1) With nose piece. (2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 R for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended. TLS Stud ETRI NOSE SSELY PRT NUERS Part No. For Part No. For Thread omplete Insert omplete Stud Size Nose ssembly Nose ssembly TLS RIV939 POWERFUL PULL-TO-PRESSURE TOOL FOR RIVET NUTS UP TO 12 The pressure controlled setting of the TLS RIV939 pull-to-pressure tool allows the installation of the same insert into various metal thickness without any adjustment of the tool. The pull-to-pressure feature extends mandril life. TLS Stud TLS RIV938S SLL, LIGHTWEIGHT PULL-TO-PRESSURE TOOL The pressure controlled installation of the TLS RIV938S pull-to-pressure tool assures consistent installations and improves mandrel life. F-10

11 TLS F FULL ETRI LIND THREDED INSERTS TLS RIV949 VERTIL HYDROPNEUTI TOOL The RIV949 is a pull-to-pressure or stroke tool. One pull is enough to start the automatic stroke. When hung on a balancer, this innovative tool makes vertical applications quicker and easier. TLS Stud TLS RIV912 PULL-TO-STROKE SPIN-PULL TOOL The RIV912 spin-pull tool provides powerful spin/pull action to easily install TLS axtite fasteners. TLS Stud TLS RIV942 PULL-TO-PRESSURE OR STROKE TOOL The RIV942 spin-pull tool can easily install TLS SpinTite and axtite fasteners. The tool has two different systems of regulation, pressure or stroke, for installing inserts. TLS Stud TLS RIV998V PNEUTI PULL-TO-STROKE TOOL The pressure controlled installation of the TLS RIV938S pull-to-pressure tool assures consistent installations and improves mandrel life. TLS Stud TLS RIV916 PULL-TO-STROKE TOOL FOR PLUS+TITE INSERTS The RIV916 tool is designed with a long stroke to easily install TLS straight shank and pre-bulbed Plus+Tite fasteners. TLS RIV V LITHIU TTERY OPERTED TOOL The RIV790 tool can install inserts from #4-40 to 3/8 and 3 to 10 thread sizes. TLS RIV990 HEXUTTER TOOL FOR HEXGONL HOLES UP TO 8 The RIV990 tool is used to transform round holes to hexagonal holes. TLS RIV991 HEXUTTER TOOL FOR HEXGONL HOLES UP TO 12 The RIV991 tool is used to transform round holes to hexagonal holes. TLS RIV901 HND TOOL Unified kit includes tooling to install #6-32, #8-32, #10-32 and 1/4-20 rivet nuts. etric kit includes tooling to install 3, 4, 5 and 6 rivet nuts. TLS RIV903 HND TOOL Unified kit includes tooling to install #6-32, #8-32, #10-32, 1/4-20, and 5/16-16 rivet nuts etric kit includes tooling to install 3, 4, 5, 6, 8 and 10 rivet nuts. TLS RIV905 HYDRULI HND TOOL Simple to operate and easy to handle. Hydraulic force allows for installation of high-strength rivet nuts. TLS Stud F-11

12 INSTLLTION TLS F FULL ETRI LIND THREDED INSERTS fter preparing properly sized hole in sheet, thread insert onto the pull-up stud of the installation tool and insert into the prepared hole. ctivate tool and the pull-up stud retracts and bulges the unthreaded portion of the fastener shank against the flat undersurface. The installation tool stud is removed, leaving the insert secure and ready for the attachment screw. VLUE-DDED OPTIONS EH Half Hex Stud Photo shown with ES insert assembled in EH insert. an also be assembled in an EK insert. This insert combines a variety a features; a half-hex, dog point stud with a PV form seal bonded to the underside of the head. Wedge Head Sealed Head Wedges under the head provide greater torque, especially in soft or thin materials. PV form seal is bonded to the underside of the head to provide a watertight seal. These parts conform to G1131, type D. ONEL Inserts Half Square Shank Insert Type EK inserts are available in ONEL. They have superior corrosion resistance and are excellent for use in food and medical industries. any sizes are in stock and available for immediate shipment. Half square shank for extremely high anti-rotation applications. ONEL is a registered trademark of Special etals orporation. Regulatory compliance information is available in Technical Support section of our website PennEngineering. Specifications subject to change without notice. See our website for the most current version of this bulletin. F-12 Technical support techsupport@pemnet.com