Apex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials.

Transcription

1 pex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials. Responsive service for all your fastener tool needs. Made in the U.S.. since 1933.

2 The pex heritage of quality, delivery and support For more than half a century pex has maintained a position of leadership in industrial fastening tools. Today, pex stands ready to improve the productivity of assembly operations around the world with unsurpassed tool performance and customer service. Here s how: Highest quality pex quality begins with select raw materials. Only carefully chosen, high grade tool steel is used to make pex industrial fastener tools. Each tool is precision machined from solid bar stock to close-tolerance standards. You always get an exact, sure fit a fit not possible from tools made in a process that grows less precise with every stamp. Finally, each tool is tempered with the exclusive pex heat treating process that lets you select the degree of hardness you require. hoose from tough, nonbrittle durability that stands up to torque, to the hardest heat treat available for the ultimate in wear resistance. The tool you need, when you need it The most popular catalog items are available off-the-shelf for immediate delivery. omplete support for your requirements pex provides the broadest selection of fastener tools in the world. From this catalog you can choose from over 5,000 individual items: from bits, sockets and hand drivers to universal wrenches, extensions and adapters. If the tool you need is not in this catalog, call your pex representative. We may have what you need as a non-catalog item or our experienced staff of tooling experts can design and produce application specific fastener tools to suit your needs. oopertools iii

3 Table of ontents Important Notes onversion hart vi vii its Phillips 1 Slotted 8 Torx 17 Torx Plus 23 Pozidriv 24 Sel-O-Fit 27 Frearson 28.N..E. 29 Socket Head 30 Square Recess 39 lutch Head 40 Pipe Plug Inserts 40 Torq-Set 41 Tri-Wing 44 Hi-Torque 46 Triple Square 47 it Holders Hex rive 48 Female Square rive 51 Hand rivers Grip Plus 53 Grip Kit 60 it ase 61 Grip Plus Sets 62 Replaceable it 63 Torx Keys 64 wls 64 Pivex 64 Hex rive Nutsetters, Extensions and Universal Wrenches Nutsetters 65 Extensions 68 Universal Wrenches 72 1/4" rive Sockets, Extensions, dapters and Universal Wrenches SE Sockets and Universal Wrenches 77 Metric Sockets and Universal Wrenches 82 Spline and Torx Sockets 84 Extensions and dapters 86 3/8" rive Sockets, Extensions, dapters and Universal Wrenches SE Sockets and Universal Wrenches 87 Metric Sockets and Universal Wrenches 96 Spline and Torx Sockets 103 Extensions and dapters 104 1/2" rive Sockets, Extensions, dapters and Universal Wrenches SE Sockets and Universal Wrenches 106 Metric Sockets and Universal Wrenches 117 Spline and Torx Sockets 126 Extensions and dapters 127 5/8" rive Sockets, Extensions, dapters and Universal Wrenches SE Sockets, Universal Wrenches and udd Wheel Sockets 129 Metric Sockets 132 Extensions and dapters 133 3/4" rive Sockets, Extensions, dapters and Universal Wrenches SE Sockets, Universal Wrenches and udd Wheel Sockets 135 Metric Sockets 138 Spline Sockets, Extensions and dapters139 1" rive Sockets, Extensions and dapters SE Sockets and udd Wheel Sockets 141 Metric Sockets 145 Spline Sockets, Extensions and dapters /2" rive SE Sockets and dapters /2" rive SE Sockets and dapters 149 Special Sockets, dapters and ccessories Reversible Sockets 150 Tap Holding Sockets 151 Grease Fitting Sockets 152 rill Holders 153 #5 (1 5/8") Spline rive Sockets, Extensions, dapters,registered Universal Wrenches and udd Wheel Sockets 154 Socket Retaining Rings 155 dapters 156 Part Number Index 161 Registered trademarks: Pozidriv, Torq-Set, and Tri-Wing, Phillips Screw o.; pex, Sel-O-Fit, opper Industries, Inc.; Hi-Torque, Voi-Shan; Torx and Torx Plus, amcar iv. of Textron. iv

4 Quick Reference its 1 47 it Holders Hand rivers Hex rive Nutsetters, Extensions & Universal Wrenches /4" Sockets, Extensions, dapters & Universal Wrenches /8" Sockets, Extensions, dapters & Universal Wrenches /2" Sockets, Extensions, dapters & Universal Wrenches /8" 2 1/2" Sockets, Extensions, dapters & Universal Wrenches Special Sockets, dapters & ccessories Part Number Index v

5 Important Notes User safety tips lways wear safety glasses when using any tool. lways visually inspect tool for damage and cracking. Immediately replace all damaged tools. o not modify or alter any tool. o not use tools beyond their limit or useful life. ontact pex for the recommended operating torque of any tool. Selecting the proper heat treat for bits Warning hoosing the proper heat treat for screwdriver tools is important in achieving long tool life. ifferent applications, different operators, and different power tools require different heat treats. pex offers a choice of three heat treat hardness levels in many of our screwdriver bits to match the particular customer s application. These heat treats are specified by a letter suffix as follows: X - The hardest heat treat available I - Intermediate hardness R - Lowest hardness Selecting the heat treat best suited for a particular application may require some trial and error. The proper heat treat depends on the failure mode. If the bit breaks or shatters, select a bit with less hardness. If the failure mode is wear, select a harder bit. Many times both breakage and wear may occur within the same application. This can be due to a number of factors such a different operators, different torque values, and different power tool settings. In general, high torque applications require R heat treats to withstand twisting and resist breakage. The X heat treat is most suitable for low torque applications, particularly if hardened screws are used. If a failure occurs, a change in hardness may result in better service. The X heat treat is most common and should be selected unless the specifics of an application or an existing problem would suggest using I or R hardness. To specify a particular heat treat, add a letter suffix to the part number. For example, to specify X hardness in a #2 Phillips insert, the part number would be 440-2X. Not all pex bits are available in all heat treats. Special heat treats can be supplied for a particular application. ontact your pex representative for specific recommendations. Using any adapter may result in a torque overload and failure in the adapter, socket or fastener. o not use thin wall sockets with impact power tools. o not use universal wrenches with impact power tools. vi

6 onversion hart Inch, Fractions Inch, ecimals Millimeters Inch, Inch, Fraction ecimal Millimeters Inch, Inch, Fraction ecimal Millimeters Inch, Inch, Fraction ecimal Millimeters Inch, Inch, Fraction ecimal Millimeters 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / vii

7 In this section Insert and Power rive its viii For all these fastener styles: Phillips Sel-o-fit lutch Head Slotted Frearson Torq-Set Torx.N..E. Tri-Wing Torx Plus Socket Head Hi-Torque Pozidriv Square Recess Triple Square it Holders, Nutsetters, Extensions and Universal Wrenches it holders adapt hex drive and female square drive power tools to a variety of insert bits. Hex drive nutsetters, extensions and universal wrenches allow nutrunning in all types of applications. Hand rivers and Kits Grip Plus hand drivers are specially shaped and constructed for greater comfort. pex replaceable bit drivers offer easy to use versatility. Grip Plus drivers and select pex fastener tools are also available in handy kits. Selecting the correct Phillips point size pex bits in these five point sizes will drive NY Phillips screw Wood Screws Machine Screws Sheet Metal Screws Point ody Flat, Flat, Oval, Round, Truss, razier, Flat, Round, Oval, Size ia. Oval Round inding Fillister utton Stove, inding / / / /4 1/4 1/ / / /16 3/8 5/ /8 7/16 3/ /16 1/2 7/16 1/2 1/2 IMPORTNT The table above will enable you to determine the Phillips point size required for any Phillips screws or bolts. The 2 and 3 point sizes cover the range of Phillips screws most commonly used. The pex Phillips bits on the following pages are available in point sizes to drive any Phillips screw.

8 Phillips its 1/4" Hex Insert its Part Point Overall Length Number Size In. mm / / * For shallow screw recesses / / / / N 3 1 1/4 32 Large body / /16 33 *For shallow screw recesses. See Tool Tip on page 7 TOOL TIP What s the difference between an insert and a power bit? Insert bits are commonly used with a bit holder in power tool applications. This combination is economical, provides flexibility and allows a fastener to be magnetically held by the bit. Power bits are placed directly into the power tool chuck. See pages for a complete listing of pex bit holders. 1

9 Phillips its 1/4" Hex Insert its Limited learance Part Point Overall Length Turned Length Number Size In. mm In. mm / / /16 11 S / / * / /2 38 7/ / T 2 1 1/ T / T 2 2 1/ / T /4 57 * For shallow screw recesses see Tool Tip on page 7. TOOL TIP Reduced diameter bits are ideal for driving screws below the surface of drywall. 1/4" Hex Insert its R Part number suffix -R For removal Part number suffix - For driving No part number suffix For both removal and driving Part Point Overall Length Number Size In. mm R1-R R R R2-R R R R Limited learance R2-R R R R3-R R R R is a trademark of the Phillips Screw o.

10 Phillips its 5/16" Hex Insert its Part Point Overall Length Number Size In. mm / / * 2 1 1/4 32 For shallow screw recesses / / / / N 4 1 1/2 38 Large body /2 64 * For shallow screw recesses see Tool Tip on page 7. 5/16" Hex Insert its R Part number suffix -R For removal Part number suffix - For driving No part number suffix For both removal and driving Part Point Overall Length Number Size In. mm R2-R 2 1 1/ R / R / R3-R 3 1 1/ R / R / R4-R 4 1 1/ R / R /4 32 pex R insert bits special wing-face ribs grip screw recesses to reduce stripping and cam-out. hoose from bits ribbed for screw removal, driving or both. TOOL TIP If a Phillips bit jumps out of the fastener (often referred to as camout), the surrounding workpiece area can be damaged. R bits reduce the risk of camout and permit higher applied torque. R is a trademark of the Phillips Screw o. 3

11 Phillips its 5/16" Square Insert its 1/4" Hex Power rive Part Point Overall Length Number Size In. mm / / /8 29 For shallow screw recesses* / /8 29 Part Point Overall Length ody iameter Turned Length Number Size In. mm In. mm In. mm / / / /4 70 1/ /2 89 1/ / / / / / /4 70 3/ /2 89 3/ / / / / / / / /4 70 1/ /2 89 1/ / / / / * / / / * 2 2 3/4 70 1/ * 2 3 1/2 89 1/ / * / * / / MM / / S / S / / / /4 70 5/ / /2 89 5/ / / / / / /4 70 1/ /2 89 1/ / / / / / / * For shallow screw recesses. See Tool Tip on page 7. 4

12 Phillips its 1/4" Hex Power rive R Part number suffix -R For removal (diagram) Part number suffix - For driving (diagram) No part number suffix For both removal and driving (diagram) Part Point Overall Length ody iameter Turned Length Number Size In. mm In. mm In. mm 491-R1-R / / / R / / / R / / / R2-R / / / R / / / R / / / R2-R 2 2 3/4 70 1/ R /4 70 1/ R /4 70 1/ R2-R 2 3 1/2 89 1/ / R /2 89 1/ / R /2 89 1/ / R / R3-R / / R / / R / / TOOL TIP Painted, coated or corroded fasteners present special problems such as excessive camout. R bits, with their extra grip, are a good solution. R bits are available in both insert and power drives. 1/4" Hex Power rive with Finder Sleeve 7/16" Hex Power rive Part Point Overall Length Sleeve iameter Number Size In. mm In. mm S /2 89 7/ S / Part Point Overall Length ody iameter Turned Length Number Size In. mm In. mm In. mm /2 89 1/ / /2 89 5/ / /2 89 3/ /4 57 R is a trademark of the Phillips Screw o. 5

13 Phillips its 9/32" 130 Yankee rive Part Point Overall Length ody iameter Number Size In. mm In. mm /4 83 3/ /4 83 9/ /4 83 5/ /4 83 3/ Screw Shank rive Screw Shank rive Part Point Overall Length ody iameter Number Size In. mm In. mm /2 38 3/ / / /2 38 1/ R2* 2 1 1/2 38 1/4 6.4 S /4 45 1/ / / /2 38 5/ *Features R anti-camout ribs. See Tool Tip on page 3. Part Point Overall Length ody iameter Number Size In. mm In. mm / / / /4" 24 Screw Shank rive Part Point Overall Length ody iameter Number Size In. mm In. mm /2 38 3/ /2 38 1/ /2 38 5/

14 Phillips its 8 32 Screw Shank rive Part Point Overall Length ody iameter Number Size In. mm In. mm / / / / * 3 1 3/ / * For shallow screw recesses. TOOL TIP 27 Series bits are ideal for poorly recessed Phillips screws. wider tip design fills out an inexact recess to make better contact. Female Square Service rive Part Female Point Overall Length ody iameter Number Square rive Size In. mm In. mm 821 1/ / / / / /8 67 5/ / /8 67 5/ / /8 67 5/ / /8 73 5/ / /8 73 5/ / /8 73 3/8 9.5 Fein rive Part Point Length Number Size In. mm FN-1PH FN-2PH FN-2PH-70M 2 2 3/4 70 FN-3PH FN-3PH-70M 3 2 3/4 70 7

15 Slotted Screw Sizes Types of Heads Note: When ordering slotted bits, please remember that head sizes and slot widths of hardened, self tapping, and sheet metal screws do not conform to the same specifications as standard wood or machine screws described in the chart below. lso, because of variations in these dimensions among screws from different manufacturers, bits should be ordered to head and slot size rather than screw size. iameter of Head Flat Head Screw Oval Head Round Head Truss inding Fillister Pan Width Sizes Wood Mach. Wood Mach. Head Head ap Mach. Head of slot /4" /16" /8"

16 Slotted its 1/4" Hex Insert its Limited learance Part Screw Length lade Thickness lade Width Number Size In. mm In. mm In. mm F-2R F-3R F-4R F-5R F-6R F-7R F-3R 1 1/ F-4R 1 1/ F-5R 1 1/ F-6R 1 1/ F-7R 1 1/ /4" Hex Insert its Part Screw Length lade Thickness lade Width Number Size In. mm In. mm In. mm F-5R / F-8R / F-10R / F-12R / F-5R 1 1/ / F-8R 1 1/ / F-10R 1 1/ / F-12R 1 1/ / F-14R 1 1/ / F-16R 1 1/ / TOOL TIP pex s premium tool alloys and proprietary heat treat help avoid typical problems such as shattering and premature bit wear. Most pex bits are available in three different heat treat hardnesses. Refer to page vi for information on selecting the proper heat treat. 9

17 Slotted its 5/16" Hex Insert its 1/4" Hex Power rive Part Screw Length lade Thickness lade Width Number Size In. mm In. mm In. mm F-5R 1 1/ / F-8R 1 1/ / F-10R 1 1/ / F-12R 1 1/ F-14R 1 1/ F-16R 1 1/ F-18R 1 3/ / lade Width/ Part Screw Length lade Thickness ody iameter Number Size In. mm In. mm In. mm F-2R 1 15/ F-2R 2 3/ F-2R F-2R 3 1/ F-2R F-2R F-2R F-3R 1 15/ F-3R 2 3/ F-3R F-3R 3 1/ F-3R F-3R F-3R F-4R 1 15/ F-4R 2 3/ F-4R F-4R 3 1/ F-4R F-4R F-4R F-5R 1 15/ F-5R 2 3/ F-5R F-5R 3 1/ F-5R F-5R (continued on next page) 10

18 Slotted its 1/4" Hex Power rive (continued) lade Width/ Part Screw Length lade Thickness ody iameter Number Size In. mm In. mm In. mm F-5R F-6R 1 15/ F-6R 2 3/ F-6R F-6R 3 1/ F-6R F-6R F-6R F-6R 1 15/ F-6R 2 3/ F-6R F-6R 3 1/ F-6R F-6R F-6R F-8R 1 15/ F-8R 2 3/ F-8R F-8R 3 1/ F-8R F-8R F-8R F-10R 1 15/ F-10R 2 3/ F-10R F-10R 3 1/ F-10R F-10R F-10R F-12R 1 15/ F-12R 2 3/ F-12R F-12R 3 1/ F-12R F-12R F-12R F-14R 1 15/ F-14R 2 3/ F-14R F-14R 3 1/ F-14R F-14R F-14R

19 Slotted its 5/16" Hex Power rive lade Width/ Part Screw Length lade Thickness ody iameter Number Size In. mm In. mm In. mm F-6R 2 1/ F-8R 2 1/ F-10R 2 1/ F-12R 2 1/ F-14R 2 1/ F-16R 2 1/ F-20R 2 1/ F-22R 2 1/ Screw Shank rive lade Width/ Part Screw Length lade Thickness ody iameter Number Size In. mm In. mm In. mm F-2R 1 1/ F-3R 1 1/ F-4R 1 1/ F-5R 1 1/ F-6R 1 1/ F-7R 1 1/ F-8R 1 1/ F-10R 1 1/ F-12R 1 1/

20 Slotted its Screw Shank rive 1/4"-24 Screw Shank rive Part Screw Length lade Thickness lade Width Number Size In. mm In. mm In. mm F-3R 1 3/ F-4R 1 3/ F-5R 1 3/ F-6R 1 3/ F-7R 1 3/ F-8R 1 3/ F-10R 1 3/ F-12R 1 3/ F-14R 1 3/ /32" 130 Yankee rive lade Width/ Part Screw Length lade Thickness ody iameter Number Size In. mm In. mm In. mm F-2R 1 1/ F-3R 1 1/ F-4R 1 1/ F-5R 1 1/ F-6R 1 1/ F-7R 1 1/ F-8R 1 1/ F-10R 1 1/ F-12R 1 1/ F-14R 1 1/ F-16R 1 1/ lade Width/ Part Screw Length lade Thickness ody iameter Number Size In. mm In. mm In. mm F-4R 3 1/ F-5R 3 1/ F-6R 3 1/ F-7R 3 1/ F-8R 3 1/ F-10R 3 1/ F-12R 3 1/

21 Slotted its 1/4" Power rive with Finder Sleeves Each finder sleeve assembly part number begins with a letter prefix that denotes the particular sleeve used with that assembly. The chart below gives complete dimensional data for each finder sleeve. Max. E G Sleeve Sleeve Part Screw Max. Min. Length G iameter E Size In. mm In. mm In. mm In. mm NOL 4F-5R / /8 9.5 L 5F-6R / /8 9.5 M 6F-6R / / P 8F-6R / / NP 8F-10R / / R 10F-12R / S 12F-14R / T 14F-16R / / U 16F-20R / / W 20F-22R / / Y 24F-24R / / TOOL TIP finder sleeve makes it easy to engage slotted fasteners with the bit. It guides the bit so there is less searching for the proper alignment between blade and slot. 14

22 Slotted Power its with Finder Sleeves 1/4" Hex Power rive Part lade it ody omplete Part Screw it Length Thickness iameter ssembly it Only Size In. mm In. mm In. mm NOL L 4F-5R 3 3/ L L 5F-6R 3 3/ M M 6F-8R 3 3/ P P 8F-10R 3 3/ R R 10F-12R 3 3/ S S 12F-14R 3 7/ T T 14F-16R 4 1/ /4" Hex Power rive Extra Short Series Part lade it ody omplete Part Screw it Length Thickness iameter ssembly it Only Size In. mm In. mm In. mm OOOL L 2F-3R 2 3/ OOL L 3F-4R 2 3/ OL L 4F-5R 2 5/ L L 5F-6R 2 5/ M M 6F-8R 2 5/ P P 8F-10R 2 5/ R R 10F-12R 2 5/ /4" Hex Power rive Long Series Part lade it ody omplete Part Screw it Length Thickness iameter ssembly it Only Size In. mm In. mm In. mm L L 5F-6R 6 1/ M M 6F-8R 6 1/ P P 8F-10R 6 1/ R R 10F-12R 6 1/ S S 12F-14R 6 1/ T T 14F-16R 6 1/

23 Slotted its 7/16" Hex Power rive with Finder Sleeves Fein rive it ody Part Screw it Length lade Thickness iameter Number Size In. mm In. mm In. mm M-321 6F-8R 3 3/ P-321 8F-10R 3 3/ R F-12R 3 7/ S F-14R 3 7/ T F-16R 4 1/ U F-20R 4 1/ W F-22R 4 1/ Y F-24R 4 1/ See chart on page 14 for sleeve diameters. Part Width X Length Number Thickness (mm) In. mm FN X.5 2 1/8 53 FN X.5 2 1/8 53 FN X.6 2 1/8 53 FN X.6 2 1/8 53 FN-320-E 4 X.8 2 1/8 53 FN-320-F 5.5 X.8 2 1/8 53 FN-320-G 5.5 X /8 53 FN-320-H 6.5 X /8 53 FN-320-I 8 X /8 53 I YOU KNOW? pex Tool ribs feature the most popular pex screwdriver bits and nutsetters or sockets and extensions. Tool ribs are free to pex distributor when they purchase the following tool assortments: PXIT piece bits and nutsetters PXIT piece bits and nutsetters PXSKT piece sockets and extensions PXSKT piece sockets and extensions. 16

24 Torx its 1/4" Hex Insert its Part Torxalign river Overall Length Number Part Number Size (Ref.) In. mm 440-TX-05 - T TX-06 - T TX-07 - T TX-08 - T TX-09 - T TX TX-10-W T TX TX-15-W T TX T / TX TX-20-W T TX T / TX T TX TX-25-W T TX TX-27-W T TX TX-30-W T TX TX-40-W T TX-45* - T / TX-50* - T /4 32 * Hex will break before rated ultimate torque of the Torx point is met. TOOL TIP Torxalign bits wedge into the Torx recess to firmly hold the fastener to the bit. 1/4" Hex Insert its Tamper Resistant** Part river Overall Length Number Size (Ref.) In. mm 440-TX-07-H T-7-H TX-08-H T-8-H TX-09-H T-9-H TX-10-H T-10-H TX-15-H T-15-H TX-20-H T-20-H TX-25-H T-25-H TX-27-H T-27-H TX-30-H T-30-H TX-40-H T-40-H ** Tamper resistant Torx screws feature a post in the center of the recess this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. ontact your local pex representative for details. Torx and Torxalign are registered trademarks of the amcar ivision of Textron. 17

25 Torx its 5/16" Hex Insert its Part river Overall Length Number Size (Ref.) In. mm 480-TX-20 T / TX-25 T / TX-27 T / TX-30 T / TX-40 T / TX T / TX-40-4 T TX-45 T / TX-45-6 T TX-50 T / TX-55 T /4 32 5/16" Hex Insert its Tamper Resistant** Part river Overall Length Number Size (Ref.) In. mm 480-TX-40-H T-40-H / TX-45-H T-45-H / TX-50-H T-50-H / TX-55-H T-55-H /4 32 **Tamper resistant Torx bits are available on a restricted distribution basis. ontact your local pex representative for details. 5/8" Hex Insert its Part Hex river Overall Length Number Flat Type* Size (Ref.) In. mm SZ-TX-55- P T /16 40 SZ-TX-60- P T /16 40 SZ-TX-70- P T /16 40 SZ-TX TH T SZ-TX-80- TH T /16 40 *P-rill Point; TH-Thru Hole. 5/8" insert bits are used with S and RP adapters found on pages 51. 7/8" Hex Insert its Part Hex river Overall Length Number Flat Type* Size (Ref.) In. mm SZ-TX-90- TH T SZ-TX-100- TH T *TH-Thru Hole. 7/8" insert bits are used with RP adapters found on pages Torx and Torxalign are registered trademarks of the amcar ivision of Textron.

26 Torx its 1/4" Hex Power rive Part river ody iameter Overall Length Number Size (Ref.) In. mm In. mm 49-TX-05 T / TX-05 T / TX-05 T / TX-06 T / TX-06 T / TX-07 T / TX-07 T / TX-07 T / TX-07 T TX-08 T / TX-08 T / TX-08 T / TX-08 T TX-09 T / TX-09 T / TX-09 T / TX-09 T TX-10 T / TX-10 T /4 70 S-4693 T TX-10 T / TX-10 T TX-15 T / TX-15 T / TX-15 T / TX-15 T TX-20 T / TX-20 T / TX-20 T / TX-20-5 T TX-20 T TX-25 T / TX-25 T / TX-25 T / TX-25 T TX-27 T / TX-27 T / TX-27 T / TX-27 T TX-30 T / TX-30 T / TX-30 T / TX-30 T TX-40 T / TX-40 T / TX-40 T / TX-40 T

27 Torx its 1/4" Hex Power rive Torxalign Part river ody iameter Overall Length Number Size (Ref.) In. mm In. mm 49-TX-08-W T / TX-09-W T / TX-10-W T / TX-15-W T / TX-15-W T / TX-15-W T / TX-20-W T / TX-20-W T / TX-25-W T / TX-27-W T / TX-30-W T / TX-30-W T /2 89 1/4" Hex Power rive Tamper Resistant** Part river ody iameter Overall Length Number Size (Ref.) In. mm In. mm 49-TX-10-H T-10-H / TX-10-H T-10-H / TX-15-H T-15-H / TX-15-H T-15-H / TX-15-H T-15-H / TX-20-H T-20-H / TX-20-H T-20-H / TX-20-H T-20-H /4" Hex Power rive with Finder Sleeves 7/16" Hex Power rive ** Tamper resistant Torx bits are available on a restricted distribution basis. ontact your local pex representative for details. Part river Sleeve Sleeve iameter Overall Length Number Size Number* (Ref.) In. mm In. mm M-32-TX-15 T-15 M /2 89 M-32-TX-20 T-20 M /2 89 NP-32-TX-25 T-25 NP /4 95 R-32-TX-27 T-27 R /8 92 S-32-TX-30 T-30 S /8 98 *See page 14 for Sleeve Selection Part river ody iameter Overall Length Number Size (Ref.) In. mm In. mm 48-TX-40 T / TX-45 T / TX-50 T / TX-55 T / Torx and Torxalign are registered trademarks of the amcar ivision of Textron.

28 Torx its Screw Shank rive Part river ody iameter Overall Length Number Size (Ref.) In. mm In. mm 50-TX-08 T / TX-10 T / TX-15 T / TX-20 T / Screw Shank rive Part river ody iameter Overall Length Number Size (Ref.) In. mm In. mm 55-TX-10 T / TX-15 T /16 30 S-4048 T / TX-20 T / TX-25 T / TX-30 T /16 30 Female Square Service rive Part river Square ody iameter Overall Length Number Size (Ref.) rive In. mm In. mm 834-TX-25 T / / TX T / / TX T / / TX T / / TX-45-5 T / TX-50 T / / TX-50 T / / TX M T / /8 150 TOOL TIP Torx fasteners are becoming more and more common in automotive and appliance assembly. pex provides a full selection of bits for Torx screws sockets for Torx bolts are listed on pages 88, and

29 Torx its 1" Square rive dapters with Torx Insert it Part river Overall Length it Length () Number Size (Ref.) In. mm In. mm SZ-8L-TX-70 T / SZ-TX-100 T / Fein rive Part river Overall Length Number Size (Ref.) In. mm FN-TX10 T /4 70 FN-TX15 T /4 70 FN-TX20 T /4 70 FN-TX25 T /4 70 FN-TX27 T /4 70 FN-TX30 T /4 70 FN-TX40 T /4 70 TOOL TIP Take the guesswork out of bit selection. pex Phillips and Torx ring gauges help you find the right bit for your fasteners. Order S-3749 for Phillips and S-4064-G for Torx. 22 Torx and Torxalign are registered trademarks of the amcar ivision of Textron.

30 Torx Plus its 1/4" Hex Insert its 1/4" Hex Power rive Part river Overall Length Number Size (Ref.) In. mm IP 10IP IP 15IP IP 20IP IP 25IP IP 27IP IP 30IP IP 40IP Part river Overall Length Number Size (Ref.) In. mm 49-10IP 10IP / IP 10IP / IP 10IP / IP 15IP / IP 15IP / IP 15IP / IP 20IP / IP 20IP / IP 20IP / IP 25IP / IP 25IP / IP 25IP / IP 27IP / IP 27IP / IP 27IP / IP 30IP / IP 30IP / IP 30IP / IP 40IP / IP 40IP / IP 40IP /2 89 Regular Torx TOOL TIP Torx Plus bits and fasteners feature a greater engagement area for higher torque transfer and reduced camout when driving Torx Plus fasteners. They can provide up to 100% more drive cycles. Torx Plus bits are not compatible with standard Torx fasteners. Torx Plus is a trademark of the amcar ivision of Textron. Torx Plus Tamper Resistent its are available on a limited basis. Please contact your rea istributor or Representative for more details. 23

31 Pozidriv its 1/4" Hex Insert its Part Point Overall Length Number Size In. mm PZ PZ 1 2 1/ PZ PZ 2 1 1/ PZ PZ 2 2 1/ PZ PZ 4 1 1/4 32 1/4" Hex Insert its Limited learance Part Point Overall Length Turned Length Number Size In. mm In. mm PZ / PZ / PZ / /16" Hex Insert its Part Point Overall Length Number Size In. mm PZ 1 1 1/ PZ 2 1 1/ PZ 3 1 1/ PZ 4 1 1/ N-PZ 4 1 1/2 38 Large body 24 Pozidriv is a registered trademark of the Phillips Screw ompany

32 Pozidriv its 1/4" Hex Power rive Part Point Overall Length ody iameter Turned Length Number Size In. mm In. mm In. mm 491-PZ / / / PZ 1 2 3/4 70 3/ PZ 1 3 1/2 89 3/ / PZ / PZ / / / PZ 2 2 3/4 70 1/ PZ 2 3 1/2 89 1/ / PZ / PZ / / PZ 3 2 3/4 70 5/ / PZ 3 3 1/2 89 5/ / PZ / /4"-24 Screw Shank rive Part Point Overall Length ody iameter Number Size In. mm In. mm 401-PZ 1 1 1/2 38 3/ PZ 2 1 1/2 38 1/ PZ 3 1 1/2 38 5/ Screw Shank rive Part Point Overall Length ody iameter Number Size In. mm In. mm 591-PZ 1 1 3/ / PZ 2 1 3/ / Screw Shank rive Part Point Overall Length ody iameter Number Size In. mm In. mm 502-PZ 2 1 1/2 38 1/4 6.4 S PZ 2 1 3/4 45 1/4 6.4 Pozidriv is a registered trademark of the Phillips Screw ompany 25

33 Pozidriv its Fein rive Part Point Overall Length Number Size In. mm FN-1PZ FN-2PZ FN-2PZ-70M 2 2 3/4 70 FN-3PZ FN-3PZ-70M 3 2 3/4 70 TOOL TIP Make sure you don't mistake Phillips bits and fasteners for Pozidriv. The shallow cross indention in the screw head identifies a Pozidriv fastener. The Pozidriv bit and recess design provides more metal-to-metal contact than a standard Phillips. This allows you to apply more torque with less possibility of camout. 26

34 Sel-O-Fit its 1/4" Hex Insert its Part Point Overall Length Number Size In. mm SF SF SF 2 1 1/ SF SF 2 2 1/ SF SF 4 1 1/4 32 1/4" Hex Insert its Limited learance Part Point Overall Length Turned Length Number Size In. mm In. mm SF / SF / /16" Hex Insert its 1/4" Hex Power rive Part Point Overall Length Number Size In. mm SF 2 1 1/ SF 3 1 1/ SF 4 1 1/ N-SF 4 1 1/2 38 Large body Part Point Overall Length ody iameter Turned Length Number Size In. mm In. mm In. mm 491-SF / / / SF 1 2 3/4 70 3/ SF 1 3 1/2 89 3/ / SF / SF / / / SF 2 2 3/4 70 1/ SF 2 3 1/2 89 1/ / SF / SF / / SF 3 2 3/4 70 5/ / SF 3 3 1/2 89 5/ / SF / Sel-O-Fit bits are designed to provide a more efficient means of driving Pozidriv screws. The Sel-O-Fit bit places torque on the strongest and most mechanically advantageous portion of the driver tip. This allows more torque to be applied while minimizing the possibility of breakage and camout. Sel-O-Fit is a registered trademark of ooper Industries. 27

35 Frearson its 1/4" Hex Insert its 5/16" Hex Insert it Part Point Overall Length Number Size In. mm 440-F ll F ll 1 25 For limited clearance Part Point Overall Length Number Size In. mm 480-F ll 1 3/8 35 1/4" Hex Power rive Part Screw Overall Length ody iameter Turned Length Number Size In. mm In. mm In. mm 491-F ll 1 15/ / / F ll 2 3/4 70 3/ F ll 3 1/2 89 3/ / F ll / F ll 1 15/ / / F ll 2 3/4 70 1/ F ll 3 1/2 89 1/ / F ll / F ll 1 15/ / F ll 2 3/4 70 5/ / F ll 3 1/2 89 5/ / F ll / The Frearson recess is designed so that any size bit will fit any size recess. hoose bits on the basis of body diameter the larger the screw, the larger the body diameter. 28

36 Frearson its Screw Shank rive 1/4" Female Square rive Part Screw Overall Length ody iameter Number Size In. mm In. mm 552-F ll 1 3/ Part Screw Overall Length ody iameter Number Size In. mm In. mm 822-F ll /4 6 3/8" Female Square rive Part Screw Overall Length ody iameter Number Size In. mm In. mm 832-F ll 2 5/8 67 1/ F ll 2 5/8 67 5/ F ll 2 5/8 67 3/8 10.N..E. its 1/4" Hex Insert its 1/4" Hex Insert its R Part Point Overall Length Number Size In. mm NE-3mm 3mm 1 1/8 29 NE-4mm 4mm 1 1/8 29 NE-5mm 5mm 1 1/8 29 NE-6mm 6mm 1 1/8 29 NE-8mm 8mm 1 1/8 29 Part Point Overall Length Number Size In. mm NE-4mm-R 4mm 1 1/8 29 NE-5mm-R 5mm 1 1/8 29 NE-6mm-R 6mm 1 1/8 29 R ribs for both removal and driving R is a trademark of the Phillips Screw o. 29

37 Socket Head Sizing hart SE Nominal Socket Head ap Screws Flat Head utton Hex Size, ap Head Set Shoulder Pressure Low Head Inches Series Series Screws ap Screws Screws Screws Plugs llenuts ap Screws , 1 1, 2 3, / , 4 3, 4 5, 6 5, 6 5/64 2, 3 3, 4 5, 6 5, /32 4, 5 5, /64 6 1/ /4 1/4 4, 5 1/4 9/ / /4 1/4 1/4 5/16 5/16 1/16 6 5/16 3/16 1/4 5/16 5/16 3/8 3/8 1/8 8, 10 3/8 7/32 5/16 3/8 3/8 7/16 7/16 1/4 5/16 7/16 1/2 1/2 1/4 1/4 1/2 5/16 3/8 3/8, 7/16 1/2 5/8 5/8 3/8 5/16 5/8 3/8 7/16, 1/2 1/2 5/8 3/4 3/4 1/2 3/8 7/16 7/16 1/2 5/8 5/8 3/4 7/8 1 1/2 9/16 3/4, 7/8 7/8 1, 1 1/8 3/4 5/8 3/ /4, 1 3/8 1 1/4 1 5/8 3/4 7/8, 1 1 1/8, 1 1/4, 1 3/8 1 1/8 1 1/2 1 1/4 3/4 7/8 1 1/8, 1 1/4 1 1/4, 1 3/8 1 1/2 7/ /8, 1 1/2 1 1/2 1 1/2 1 3/4, 2 1 3/4 1 1/2, /4 1 3/ /4 1 1/ /2 1 3/4 2 1/4, 2 1/2 1 3/ /4 Metric Nominal hex Size, Socket Head Flat Head utton Head Set Shoulder Low Head MM ap Screws ap Screws ap Screws Screws Screws llenuts ap Screws 1.5 M1.6, M1.7, M2 M3 2 M2.3, M2.5, M2.6 M3 M3 M4 2.5 M3 M4 M4 M5 3 M4 M5 M5 M6 6mm M3 M4 4 M5 M6 M6 M8 8mm M4 M5 5 M6 M8 M8 M10 10mm M5 M6 6 M8 M10 M10 M12, M14 12mm M6 M8 8 M10 M12 M12 M16 16mm M8 M10 10 M12 M14, M16 M20 20mm M10 M12 12 M14 M20 M24 M12 M14 14 M16 M16 17 M20 M16 M20, M22 19 M24 M24 30

38 Socket Head its 1/4" Hex Insert its 1/4" Hex Insert its Metric 5/16" Hex Insert its Part Hex Overall Length Number Size In. mm / / / / / / /32 1 5/ /16 1 5/ / /32 1 5/ /4 1 5/ /16 1 1/ /8 1 1/4 32 Part Hex Overall Length Number Size In. mm mm 1.5mm mm 2mm mm 2.5mm mm 3mm mm 4mm 1 5/ mm 5mm 1 5/ mm 6mm 1 5/ mm 7mm 1 1/ mm 8mm 1 1/ mm 9mm 1 1/ mm 10mm 1 1/4 32 Part Hex Overall Length Number Size In. mm /32 1 5/ /16 1 5/ /32 1 5/ /4 1 5/ /16 1 5/ /8 1 5/

39 Socket Head its 5/16" Hex Insert its Metric 1/4" Hex Power rive Part Hex Overall Length Number Size In. mm mm 2.5mm mm 3mm mm 4mm 1 5/ mm 5mm 1 5/ mm 6mm 1 5/ mm 7mm 1 5/ mm 8mm 1 5/ mm 9mm 1 5/ mm 10mm 1 3/ mm 12mm 1 1/ mm 14mm 1 1/4 32 Part Hex Overall Length Number Size In. mm M-02 1/ /16 49 M-02-5/ /16 49 M-03 3/ /16 49 M / M / M-03-7/ /16 49 M-04 1/8 1 15/16 49 M / M /8 3 1/2 89 M / M / M / M-04-9/ /16 49 M / M-05 5/ /16 49 M / M /32 3 1/2 89 M / M / M / M / M-06 3/ /16 49 M / M / M / M-07 7/ /16 49 M-08 1/4 1 15/16 49 M-10 5/ /

40 Socket Head its 1/4" Hex Power rive Metric 5/16" Hex Power rive Part Hex Overall Length Number Size In. mm M-1.5mm 1.5mm 1 15/16 49 M-2mm 2mm 1 15/16 49 M-2.5mm 2.5mm 1 15/16 49 M-3mm 3mm 1 15/16 49 M-3mm-3 3mm 3 76 M-3mm-4 3mm M-4mm 4mm 1 15/16 49 M-5mm 5mm 1 15/16 49 M-5mm-4 5mm M-6mm 6mm 1 15/16 49 M-6mm-4 6mm M-7mm 7mm 1 15/16 49 M-8mm 8mm 1 15/16 49 M-10mm 10mm 1 15/16 49 Part Hex Overall Length Number Size In. mm S-04 1/ S-05 5/ S-06 3/ S-07 7/ S-08 1/ S-10 5/ S-12 3/

41 Socket Head its 7/16" Hex Power rive 7/16" Hex Power rive Metric Part Hex Overall Length Number Size In. mm N-04 1/8 3 1/2 89 N-04-9/64 3 1/2 89 N-05 5/32 3 1/2 89 N / N-06 3/16 3 1/2 89 N / N-07 7/32 3 1/2 89 N / N-08 1/4 3 1/2 89 N / N-09 9/32 3 1/2 89 N-10 5/16 3 1/2 89 N / N-12 3/8 3 1/2 89 N / N-16 1/2 3 1/2 89 N / Part Hex Overall Length Number Size In. mm N-3mm 3mm 3 1/2 89 N-4mm 4mm 3 1/2 89 N-5mm 5mm 3 1/2 89 N-6mm 6mm 3 1/2 89 N-8mm 8mm 3 1/2 89 N-10mm 10mm 3 1/2 89 N-12mm 12mm 3 1/2 89 N-14mm 14mm 3 1/2 89 N-14mm-6 14mm

42 Socket Head its 5/8" Hex Power rive Fein rive Part Hex Overall Length Number Size In. mm P-08 1/ P-10 5/ P-12 3/ P-16 1/ P-18 9/ P-20 5/ P-24 3/ Part Hex Overall Length Number Size In. mm FN-185-3MM 3 mm 2 53 FN-185-4MM 4 mm 2 53 FN-185-5MM 5 mm 2 53 FN-185-6MM 6 mm 2 53 FN-185-8MM 8 mm 2 53 Socket Head its with Square rive dapters, SE 3/8" Square rive Part Number Overall Length dapter Insert Hex Length of Insert omplete Only Only Size In. mm In. mm SZ-9 S-314 SZ-9-3/32 2 3/ /8 35 SZ-7 S-314 SZ-7-7/64 2 3/ /8 35 SZ-10 S-314 SZ-10-1/8 2 3/ /8 35 SZ-11 S-314 SZ-11-5/32 2 3/ /8 35 SZ-12 S-314 SZ-12-3/16 2 3/ /8 35 SZ-13 S-314 SZ-13-7/32 2 3/ /8 35 SZ-14 S-314 SZ-14-1/4 2 3/ /8 35 SZ-15 S-314 SZ-15-5/16 2 3/ /8 35 SZ-16 S-314 SZ-16-3/8 2 3/ /8 35 SZ-17 S-314 SZ-17-1/2 2 3/ /8 35 SZ-18 S-314 SZ-18-9/16 2 3/ /8 35 SZ-19 S-314 SZ-19-5/8 2 3/ /

43 Socket Head its with Square rive dapters, SE 1/2" Square rive 7/16" Hex Insert it Only Part Number Overall Length dapter Insert Hex Length of Insert omplete Only Only Size In. mm In. mm SZ-40 S-514 SZ-10-1/8 2 1/ /8 35 SZ-41 S-514 SZ-11-5/32 2 1/ /8 35 SZ-20 S-514 SZ-12-3/16 2 1/ /8 35 SZ-21 S-514 SZ-13-7/32 2 1/ /8 35 SZ-22 S-514 SZ-14-1/4 2 1/ /8 35 SZ-23 S-514 SZ-15-5/16 2 1/ /8 35 SZ-24 S-514 SZ-16-3/8 2 1/ /8 35 SZ-25 S-514 SZ-17-1/2 2 1/ /8 35 SZ-42 S-520 SZ-31-1/2 2 1/ /16 40 SZ-43 S-514 SZ-18-9/16 2 1/ /8 35 SZ-44 RP-520 SZ-32-9/16 2 1/ /16 40 SZ-26 S-514 SZ-19-5/8 2 1/ /8 35 SZ-27 RP-520 SZ-33-5/8 2 1/ /16 40 dapters with an S prefix feature a set screw for locking in the bit. n RP prefix indicates adapters with a thru hole for a spring pin. Part Hex Overall Length Number Size In. mm SZ / SZ / SZ / SZ / SZ / SZ / SZ / SZ / SZ / SZ / SZ / SZ / Use 7/16" Hex Insert its with 7/16" Female Hex Square drive adapters, page 51. These bits feature a thru hole on the hex flat for use with a spring pin. 36

44 Socket Head its with Square rive dapters, SE 3/4" Square rive Part Number Overall Length it dapter Insert Hex Length of Insert Length () omplete Only Only Size In. mm In. mm In. mm SZ-30 S-720 SZ-30-3/8 2 5/ / /32 23 SZ-31 S-720 SZ-31-1/2 2 5/ / /32 23 SZ-32 RP-720 SZ-32-9/16 2 5/ / /32 23 SZ-33 RP-720 SZ-33-5/8 2 5/ / /32 23 SZ-34 RP-720 SZ-34-3/4 2 5/ / /32 23 SZ-37 RP-728 SZ-37-3/4 3 1/ /8 29 SZ-35 S-720 SZ-35-7/8 2 5/ / /32 23 SZ-38 RP-728 SZ-38-7/8 3 1/ /8 29 SZ-36 RP-720 SZ / / /32 23 SZ-39 RP-728 SZ / /8 29 1" Square rive Part Number Overall Length it dapter Insert Hex Length of Insert Length () omplete Only Only Size In. mm In. mm In. mm SZ-80 RP-820 SZ-31-1/2 3 1/ / /32 23 SZ-81 RP-828 SZ-81-1/2 3 1/ /8 29 SZ-82 RP-820 SZ-32-9/16 3 1/ / /32 23 SZ-83 RP-828 SZ-83-9/16 3 1/ /8 29 SZ-84 RP-820 SZ-33-5/8 3 1/ / /32 23 SZ-85 RP-828 SZ-85-5/8 3 1/ /8 29 SZ-86 RP-820 SZ-34-3/4 3 1/ / /32 23 SZ-87 RP-828 SZ-37-3/4 3 1/ /8 29 SZ-88 S-820 SZ-35-7/8 3 1/ / /32 23 SZ-89 RP-828 SZ-38-7/8 3 1/ /8 29 SZ-91 RP-828 SZ / /8 29 SZ-100 RP-848 SZ / / /8 35 SZ-101 RP-848 SZ /4 3 1/ / /8 35 SZ-102 RP-848 SZ /2 3 3/ / /8 35 SZ-104 RP-848 SZ /4 4 1/ / /32 51 n RP prefix indicates adapters with a roll pin that is inserted through the bit. Socket Head it and dapter Sets PH38 8 piece, 3/8" square drive: 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 PH56 6 piece, 1/2" square drive: 1/4, 5/16, 3/8, 1/2, 9/16, 5/8 37

45 Socket Head dapters & Inserts, Metric 3/8" Square rive 1/2" Square rive 3/4" Square rive 1" Square rive Socket Head it and dapter Sets Part Number Overall Length it dapter Insert Hex Length of Insert Length () omplete Only Only Size In. mm In. mm In. mm SZ-3-7-4mm S-314 SZ-7-4mm 4mm 2 3/ /8 35 7/8 22 SZ-3-7-5mm S-314 SZ-7-5mm 5mm 2 3/ /8 35 7/8 22 SZ-3-7-6mm S-314 SZ-7-6mm 6mm 2 3/ /8 35 7/8 22 SZ-3-7-8mm S-314 SZ-7-8mm 8mm 2 3/ /8 35 7/8 22 SZ mm S-314 SZ-7-10mm 10mm 2 3/ /8 35 7/8 22 Part Number Overall Length it dapter Insert Hex Length of Insert Length () omplete Only Only Size In. mm In. mm In. mm SZ-5-7-3mm S-514 SZ-7-3mm 3mm 2 1/ /8 35 7/8 22 SZ-5-7-4mm S-514 SZ-7-4mm 4mm 2 1/ /8 35 7/8 22 SZ-5-7-5mm S-514 SZ-7-5mm 5mm 2 1/ /8 35 7/8 22 SZ-5-7-6mm S-514 SZ-7-6mm 6mm 2 1/ /8 35 7/8 22 SZ-5-7-8mm S-514 SZ-7-8mm 8mm 2 1/ /8 35 7/8 22 SZ mm S-514 SZ-7-10mm 10mm 2 1/ /8 35 7/8 22 SZ mm S-514 SZ-7-12mm 12mm 2 1/ /8 35 7/8 22 SZ mm S-514 SZ-7-14mm 14mm 2 1/ / /16 24 SZ mm RP-520 SZ-10-14mm 14mm 2 1/ / /32 23 SZ mm RP-520 SZ-10-17mm 17mm 2 1/ / /32 23 SZ mm RP-520 SZ-10-19mm 19mm 2 1/ / /32 23 Part Number Overall Length it dapter Insert Hex Length of Insert Length () omplete Only Only Size In. mm In. mm In. mm SZ mm RP-720 SZ-10-10mm 10mm 2 1/ / /32 23 SZ mm RP-720 SZ-10-12mm 12mm 2 1/ / /32 23 SZ mm RP-720 SZ-10-14mm 14mm 2 1/ / /32 23 SZ mm RP-720 SZ-10-17mm 17mm 2 1/ / /32 23 Part Number Overall Length it dapter Insert Hex Length of Insert Length () omplete Only Only Size In. mm In. mm In. mm SZ mm RP-828 SZ-14-17mm 17mm 3 5/ /8 29 SZ mm RP-828 SZ-14-19mm 19mm 3 5/ /8 29 SZ mm RP-828 SZ-14-22mm 22mm 3 5/ /8 29 SZ mm RP-828 SZ-14-24mm 24mm 3 5/ /8 29 SZ mm RP-828 SZ-14-27mm 27mm 3 5/ /8 29 PH35M PH56M 5 piece, 3/8" square drive: 4mm, 5mm, 6mm, 8mm, 10mm 6 piece, 1/2" square drive: 6mm, 8mm, 10mm, 12mm, 14mm, 17mm 38

46 Square Recess its 1/4" Hex Insert its 1/4" Hex Power rive Part Point Nominal Size Overall Length Number Size In. In. mm / / / / Part Point Nominal Size Overall Length Number Size In. In. mm / / /16 2 3/ / / / /32 2 3/ /32 3 1/ / /8 1 15/ /8 2 3/ /8 3 1/ / / / /64 2 3/ /64 3 1/ / /4" Hex Power rive Turned ody Part Point Nominal Size Overall Length Turned Length Number Size In. In. mm In. mm / / / /16 2 3/ /16 3 1/ / / / / /32 2 3/ /32 3 1/ / /8 1 15/ / /8 2 3/ /8 3 1/ / / / / /64 2 3/ /64 3 1/ /4 70 Screw Size 3 & 4 5, 6, 7 8, 9, /4 Square Point Size

47 lutch Head its 1/4" Hex Insert its 1/4" Hex Power rive Standard G-Type lutch Overall Length Part Number Part Number Size In. mm G 3/32 1 1/ G 1/8 1 1/ G 5/32 1 1/ G 3/16 1 1/ G 1/4 1 1/ G 5/16 1 1/4 32 Type G power bits are available on request. Standard lutch Overall Length Part Number Size In. mm /8 1 15/ / / /32 2 3/ /32 3 1/ / / / /4 1 15/16 49 Male Square Inserts for Pipe Plugs 1/4" to 1/2" Male Square Male Male Overall Part Hex Square Length Number In. In. In. mm P /16 1/4 1 1/4 32 P /16 9/32 1 1/4 32 P /16 5/16 1 1/4 32 P /16 3/8 1 1/4 32 P /16 7/16 1 1/4 32 P /16 1/2 1 1/4 32 P /16 9/16 1 1/2 38 P /8 5/16 1 1/2 38 P /8 3/8 1 1/2 38 P /8 7/16 1 1/2 38 P /8 1/2 1 1/2 38 Note: For pipe plug inserts use S and RP bit holders found on page

48 Torq-Set its 1/4" Hex Insert its 1/4" Hex Insert its R vailable with R ribs for removal only 5/16" Hex Insert its 5/16" Hex Insert its R Part Point Overall Length Number Size In. mm /4 1/ Part Point Overall Length Number Size In. mm R 6 1 1/ R 8 1 1/ R / /4-R 1/4 1 1/4 32 Part Point Overall Length Number Size In. mm / / /4 1/4 1 1/ /16 5/16 1 1/ /8 3/8 1 1/4 32 vailable with R ribs for removal only Part Point Overall Length Number Size In. mm 212-1/4-R 1/4 1 1/ /16-R 5/16 1 1/4 32 I YOU KNOW pex offers a full selection of fastener tools common to aircraft assembly and maintenance, including Tri-Wing, Torq-Set, Hi- Torque and Phillips. Torq-Set and R are registered trademarks of the Phillips Screw ompany 41

49 Torq-Set its 5/16" Hex Power rive 7/16" Hex Power rive Part Point Overall Length Number Size In. mm /4 1 1/ /16 1 1/ /4 1/4 1 1/ /16 5/16 1 1/ /8 3/8 1 1/4 32 Part Point Overall Length Number Size In. mm 170-1/4 1/4 1 1/ /4 1/4 3 1/ /4 1/ /16 5/16 1 1/ /16 5/16 3 1/ /16 5/ /8 3/8 1 1/ /8 3/8 1 1/ /8 3/8 3 1/ /8 3/ /16 7/16 1 1/ /16 7/16 1 1/ /16 7/16 3 1/ /16 7/ /16" Hex Power rive R vailable with R ribs for removal only Part Point Overall Length Number Size In. mm 170-1/4-R 1/4 1 1/ /16-R 5/16 1 1/4 32 5/8" Hex Power rive Part Point Overall Length Number Size In. mm 170-1/2 1/4 1 1/ /16 9/16 1 1/ /8 5/8 1 1/ /8* 5/8 1 1/4 32 * 170-5/8 features a larger nose end diameter. Torq-Set and R are registered trademarks of the Phillips Screw ompany 43

50 Torq-Set its 1/4" Hex Power rive Part Point Overall Length Number Size In. mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / R* 6 1 1/ / / / / / R* 8 1 1/ / / / / / R* / / / / / /4 1/4 1 1/ /16 5/16 1 1/ /8 3/8 1 1/4 32 *Feature R anti-camout ribs.

51 Tri-Wing 1/4" Hex Insert its 1/4" Hex Insert its R Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TW TW TW TW TW TW / TW-6 6 1/4 5/ TW-7 7 5/16 3/ vailable with R ribs for removal only Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TW-4-R TW-5-R / /16" Hex Insert it Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TWE /4 32 TWE / /4 32 1/4" Hex Power rive Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TW /4 32 TW /4 32 TW /4 32 TW /4 32 TW /4 32 TW / /4 32 TW-6 6 1/4-28 5/ /4 32 TW-7 7 5/ / /4 32 TW-8 8 3/8-24 7/ / Tri-Wing and R are registered trademarks of the Phillips Screw ompany

52 Tri-Wing 1/4" Hex Power rive R Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TW-5-R / /4 32 5/16" Hex Power rive 7/16" Hex Power rive 5/8" Hex Power rive Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TW /4 32 TW / /4 32 TW-6 6 1/4-28 5/ /4 32 TW-7 7 5/ / /4 32 TW-8 8 3/8-24 7/ /4 32 Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TW-6 6 1/4-28 5/ /4 32 TW-7 7 5/ / /4 32 TW-8 8 3/8-24 7/ /4 32 Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TW-9 9 7/ / /4 32 TW /2-20 9/ /4 32 TW / / /4 32 TW /8-18 3/ /4 32 TW /4-16 7/ /2 64 3/4" Hex Power rive Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TW / TW Tri-Wing and R are registered trademarks of the Phillips Screw ompany 45

53 Hi-Torque its 1/4" Square rive Insert its 3/8" Square rive Insert its 1/2" Square rive Insert its 1/4" Hex Insert its Overall ody lade lade Part Length iameter Thickness Width Number Recess In. In. In. In. HTS / HTS / HTS / HTS / HTS / Overall ody lade lade Part Length iameter Thickness Width Number Recess In. In. In. In. HTS / HTS / HTS /4 3/ HTS /4 3/ Overall ody lade lade Part Length iameter Thickness Width Number Recess In. In. In. In. HTS / HTS / HTS /8 1 1/ HTS /8 1 1/ HTS /8 1 1/ Overall ody lade lade Part Length iameter Thickness Width Number Recess In. In. In. In. HTN /4 9/ HTN /4 5/ HTN /4 3/ HTN /4 1/ Nominal Screw Size /4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 Hi-Torque Recess Hi-Torque Rudy Vaughn, Licensor

54 Triple Square its 1/4" Hex Insert its 5/16" Hex Insert its 1/4" Hex Power rive Part Point Overall Length Number Size In. mm 440-TSQ-4M 4mm TSQ-5M 5mm TSQ-6M 6mm TSQ-8M 8mm TSQ-10M 10mm 1 25 Part Point Overall Length Number Size In. mm 480-TSQ-4M 4mm 1 1/ TSQ-5M 5mm 1 1/ TSQ-6M 6mm 1 1/ TSQ-8M 8mm 1 1/ TSQ-10M 10mm 1 1/ TSQ-12M 12mm 1 1/ TSQ-14M 14mm 1 1/4 32 Part Point Overall Length Number Size In. mm 49-TSQ-4M 4mm TSQ-5M 5mm TSQ-6M 6mm TSQ-8M 8mm TSQ-10M 10mm TSQ-12M 12mm /16" Hex Power rive Part Point Overall Length Number Size In. mm 48-TSQ-4M 4mm 3 1/ TSQ-5M 5mm 3 1/ TSQ-6M 6mm 3 1/ TSQ-8M 8mm 3 1/ TSQ-10M 10mm 3 1/ TSQ-12M 12mm 3 1/ TSQ-14M 14mm 3 1/

55 it Holders 1/4" Hex rive for 1/4" Hex Inserts Non-magnetic Part Overall Length Number In. mm / M Magnetic M /32 75 Magnetic M /32 79 Magnetic; 3/8" (9.5mm) reduced diameter M Magnetic M Magnetic M Magnetic M Magnetic M Magnetic M /4 83 Magnetic; for Flip-Tip reversible bits M /8 73 Magnetic; 3/8" (9.5mm) turned shank M Magnetic; 3/8" (9.5mm) turned shank RM /8 73 Magnetic; nose piece only, #490-RN RM Magnetic; nose piece only, #490-RN RM Magnetic; nose piece only, #490-RN M OR 2 51 Magnetic; with O-Ring retainer M-490-OR 3 76 Magnetic; with O-Ring retainer TOOL TIP it holders, like this pex M-490, let you use a variety of insert bits in power tool applications. You get economy and flexibility and fasteners can be magnetically held to the bit. 48

56 it Holders 1/4" Hex rive for 1/4" Hex Inserts, Quick Release Part Overall Length Number In. mm QR-M Magnetic; quick release QR-M /32 74 Magnetic; quick release QR-M Magnetic; quick release QR-M M 7 7/8 200 Magnetic; quick release TOOL TIP quick-release bit holder allows fast, easy insert bit changes while assuring that bits stay securely in the bit holder. Simply pull back on the knurled sleeve to release the bit. 1/4" Hex rive for 5/16" Hex Inserts Part Overall Length Number In. mm /8 60 M /16 78 Magnetic 5/16" Hex rive Part Overall Length Number In. mm /16 46 For 1/4" hex inserts M For 1/4" hex inserts; magnetic /2 64 For 5/16" hex inserts M /32 79 For 5/16" hex inserts; magnetic 5/16" uckeye-esoutter for 1/4" Hex Inserts Part Overall Length Number In. mm M /16 81 Magnetic 49

57 it Holders 7/16" Hex rive Part Overall Length Number In. mm /4 70 For 1/4" hex inserts M /16 78 For 1/4" hex inserts; magnetic /4 70 For 5/16" hex inserts M /16 84 For 5/16" hex inserts; magnetic M For 5/16" hex inserts; magnetic 9/32" 130- Yankee Type for 1/4" Hex Inserts Part Overall Length Number In. mm /4 57 M /8 86 Magnetic 5/16" 131- Yankee Type for 1/4" Hex Inserts Part Overall Length Number In. mm /4 57 M /8 86 Magnetic 7/32" 135- Yankee Type for 1/4" Hex Inserts Part Overall Length Number In. mm /4 57 M /8 86 Magnetic 1/4"-20 Screw Shank for 1/4" Hex Inserts Part Overall Length Number In. mm /16 30 M /32 60 Magnetic 1/4"-24 Screw Shank for 1/4" Hex Inserts Part Overall Length Number In. mm /8 29 M /32 61 Magnetic 50

58 it Holders 1/4" Female Square rive 3/8" Female Square rive 1/2" Female Square rive Part Overall Length Number In. mm For 1/4" hex inserts M /32 58 For 1/4" hex inserts; magnetic /32 18 For 1/4" square inserts Part Overall Length Number In. mm /2 38 For 1/4" hex inserts M /32 69 For 1/4" hex inserts; magnetic /2 38 For 5/16" hex inserts M /4 70 For 5/16" hex inserts; magnetic /2 38 For 5/16" square inserts Part Overall Length Number In. mm /4 45 For 1/4" hex inserts M /4 70 For 1/4" hex inserts; magnetic /4 45 For 5/16" hex inserts M /4 70 For 5/16" hex inserts; magnetic /4 45 For 5/16" square inserts it Holders/dapters with Set Screw or Thru Hole E Part Number Hex Square Overall ody Opening Set Screw Spring Pin Spring Pin Opening rive Length () iameter () epth (E) Lock Retainer Only () In. () In. In. mm In. mm In. mm S /4 1/4 1 1/4 32 3/4 19 5/8 16 S /4 3/8 1 1/2 38 3/4 19 5/8 16 S /4 1/2 1 1/2 38 7/8 22 5/8 16 S /16 1/ / /32 13 S-314 RP S /16 3/8 1 3/8 35 3/ /32 13 S-514 RP S /16 1/2 1 5/ / /32 13 S-614 RP S /16 5/8 1 3/ / /32 13 S-520 RP S /8 1/2 1 1/ / /16 17 S-620 RP S /8 5/8 1 1/ / /16 17 S-720 RP S /8 3/4 1 11/ / /16 17 S-820 RP S / / / /16 17 S-724 RP S /4 3/ /8 42 7/8 22 S-728 RP S /8 3/ / /64 23 S-828 RP S / / /8 54 5/8 23 Note: Use S and RP bit holders with socket head inserts (page 36) and pipe plug inserts (page 40). an be used with power bits. 51

59 it Holders Female Threaded rive, Quick Releasing hucks Part Female Hex Opening Overall Length Overall iameter Opening epth Number Thread In. In. mm In. mm In. mm QR-08 3/8"-24 1/4 1 3/4 45 3/ /64 24 QR-14 3/8"-24 7/ / /16 27 QRF-08 1/2"-20 1/4 1 3/4 45 3/ /64 24 QRF-14 1/2"-20 7/ / /16 27 QRF-20 1/2"-20 5/8 2 5/ / /2 38 Female Square rive, Quick Releasing hucks F E Hex Square Overall ody Sleeve Opening Opening rive Length iameter iameter epth Part () () () () (E) (F) Number In. In. In. mm In. mm In. mm In. mm QR-108 1/4 1/4 1 1/2 38 3/4 19 3/ /64 24 QR-308 1/4 3/8 1 3/4 45 3/4 19 3/ /64 24 QR-508 1/4 1/2 2 1/8 54 7/8 22 3/ /64 24 QR-314 7/16 3/ / /32 28 QR-514 7/16 1/2 2 1/ / /16 27 QR-614 7/16 5/8 2 1/ / / /16 27 QR-714 7/16 3/4 2 3/ / / /16 27 QR-520 5/8 1/2 2 5/ / / /2 38 QR-620 5/8 5/8 2 5/ / / /2 38 QR-720 5/8 3/4 3 1/ / / /2 38 QR-820 5/ / / / /2 38 QR-824 3/ / / /8 41 TOOL TIP pex quick release chucks provide fast and easy power bit changes. 52

60 Grip Plus iamond Series Hand rivers Phillips Part Overall Length lade Length Number Size In. mm In. mm GPH GPH GPH GPH Slotted Part Overall Length lade Length lade Thickness lade Width Number In. mm In. mm In. mm In. mm GS GS GS TOOL TIP Grip Plus hand drivers are ideally shaped for the hand and include areas of soft cushioning around a solid core. The result is a tool that conforms perfectly to your grip for maximum comfort and reduced fatigue. You can also transfer more torque compared to some hand drivers, the Grip Plus design requires only half the energy to produce the same amount of driving force. Pozidriv is a registered trademark of the Phillips Screw o. 53

61 Grip Plus Heavy uty Series Hand rivers Phillips Part Overall Length lade Length Number Size In. mm In. mm GPHR GPHR GPHR GPHR GPHR GPHR GPHR Phillips, Stubby Part Overall Length lade Length Number Size In. mm In. mm GPHR GPHR Phillips, Hex Shaft Slotted Part Overall Length lade Length Number Size In. mm In. mm GPHH GPHH GPHH GPHH Part Overall Length lade Length lade Thickness lade Width Number In. mm In. mm In. mm In. mm GSR GSR GSR GSR Slotted, Hex Shaft Part Overall Length lade Length lade Thickness lade Width Number In. mm In. mm In. mm In. mm GSH GSH GSH GSH GSH

62 Grip Plus Heavy uty Series Hand rivers Slotted, abinet Part Overall Length lade Length lade Thickness lade Width Number In. mm In. mm In. mm In. mm GSR GSR GSR GSR GSR PZ for Pozidriv Screws Part Overall Length lade Length Number Size In. mm In. mm GPZ GPZ GPZ GPZ Pozidriv is a registered trademark of the Phillips Screw o. 55

63 Grip Plus Heavy uty Series Hand rivers Torx Part Overall Length lade Length Number Size In. mm In. mm GTX5-60 T GTX6-60 T GTX7-60 T GTX8-60 T GTX9-60 T GTX10-80 T GTX15-80 T GTX T GTX T GTX T GTX T GTX T GTX T Torx Tamper Resistant** Part Overall Length lade Length Number Size In. mm In. mm GTXH10-80 T GTXH15-80 T GTXH T GTXH T GTXH T GTXH T GTXH T ** Tamper resistant Torx screws feature a post in the center of the recess this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. ontact your local pex representative for details. 56 Torx is a registered trademark of the amcar ivision of Textron.

64 Grip Plus T-Handle rivers Torx Part Overall Length lade Length Number Size In. mm In. mm TTX6-100 T TTX7-100 T TTX8-100 T TTX9-100 T TTX T TTX T TTX T TTX T TTX T TTX T TTX T TTX T TTX T Torx is a registered trademark of the amcar ivision of Textron. 57

65 Grip Plus T-Handle rivers Nut rivers, SE Nut rivers, Metric Part Overall Length lade Length Number Size In. mm In. mm TN1/ / TN5/ / TN3/ / TN7/ / TN1/ / TN9/ / TN5/ / Part Overall Length lade Length Number Size In. mm In. mm TN5M TN5.5M TN6M TN7M TN8M TN9M TN10M TN11M TN12M TN13M TN14M TN15M TN16M TN17M Male Square rive dapters with pin lock Part Overall Length lade Length Number Size In. mm In. mm TQ / TQ /

66 Grip Plus ombo ombo rivers ombo Hex it Holder/dapter 6mm Hex Shaft ombo river GH Use with adapters and extension shown below. ombo Ratchet river GHR Use with adapters and extension shown below. ombo T-Handle river TH Use with adapters and extension shown below. ombo T-Handle Ratchet river THR Use with adapters and extension shown below. ombo it Holding river G ombo it Holding river, Magnetic GM ombo it Holding river with Hollow Handle GMH GMH- ombo Square rive dapter 6mm Hex Shaft ombo Extension 6mm Hex Shaft With Phillips bits #1,#2, #3 and Slotted bits 4F-5R, 6F-8R, 10F-12R Without bits Part Overall Length lade Hex Number Size In. mm In. mm 1/ M 1/ Magnetic Part Overall Length lade Hex Number Size In. mm In. mm SQ 1/ Overall Length Male Hex Female Hex Part In. mm In. mm In. mm E Use with all ombo dapters 59

67 Grip Kit Tool ssortments 14 Piece Set GK-14 Metal carrying case includes: Replaceable it T-Handle Ratchet river Hex it Holder Extension Phillips bits: #1, #2, #3, #4 Slotted bits: 4F-5R, 6F-8R Torx bits: T-20, T-25, T-30, T-40 Pozidriv bit: #2 17 Piece Set 34 Piece Set 44 Piece Set GK-17 Metal carrying case includes: Replaceable it T-Handle Ratchet river Hex it Holder Extension Phillips bits: #1, #2, #3, #4 Slotted bits: 4F-5R, 6F-8R, 10F-12R Torx bits: T-20, T-25, T-30, T-40 Pozidriv bits: #1, #2, #3 GK-34 Metal carrying case includes: Replaceable it Hand river Replaceable it T-Handle Ratchet river Phillips bits: #1, #2, #3, #4 Slotted bits: 4F-5R, 6F-8R, 10F-12R Torx bits: T-10, T-15, T-20, T-25, T-30, T-40 Pozidriv bits: #1, #2, #3 Square bits: 3/32", 1/8" Sockets (SE): 3/16", 1/4", 5/16", 3/8" Sockets (Metric): 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm GK-44 Metal carrying case includes: Replaceable it Hand river Replaceable it T-Handle Ratchet river Hex it Holder 1/4" Square rive dapter Extension Phillips bits: #1, #2, #3 Slotted bits: 4F-5R, 6F-8R, 10F-12R Torx bits: T-8, T-9, T-10, T-15, T-20, T-25, T-27, T-30, T-40 Pozidriv bits: #1, #2, #3 Square bits: 3/32", 1/8", 9/64" Hex bits: 3/32", 1/8", 9/64", 5/32", 3/16", 3mm, 4mm Sockets (SE): 3/16", 1/4", 5/16", 3/8" Sockets (Metric): 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm 60 Torx is a registered trademark of the amcar ivision of Textron. Pozidriv is a registered trademark of the Phillips Screw ompany.

68 it ase Tool ssortments 6 it ssortments 6- Plastic carrying case includes: Phillips bits: #1, #2, #3 Slotted bits: 4F-5R, 6F-8R, 10F-12R Magnetic it Holder: M /4" Hex 9 it ssortments* it ssortments Plastic carrying case includes: Phillips bits: #1, #2 Slotted bits: 4F-5R, 6F-8R Pozidriv bits: #1, #2 Magnetic it Holder: M /4" Hex Plastic carrying case includes: Torx bits: T-10, T-15, T-20, T-25, T-30, T-40 Magnetic it Holder: M /4" Hex Plastic carrying case includes: Phillips bits: #1, #2, #3 Slotted bits: 4F-5R, 6F-8R Pozidriv bits: #1, #2 Square bits: 3/32", 1/8" Magnetic it Holder: M-490-1/4" Hex Plastic carrying case includes: Phillips bits: #1, #2, #3 Torx bits: T-10, T-15, T-20, T-25, T-30, T-40 Magnetic it Holder: M-490 1/4" Hex *9 it ssortments do not include QR holder as pictured. Plastic carrying case includes: Phillips bits: 20 ea. #1, 30 ea. #2, 10 ea. #3 Magnetic it Holder: M-490 1/4" Hex Plastic carrying case includes: Phillips bits: 10 ea. #1, #2, #3 Slotted bits: 10 ea. 4F-5R, 6F-8R, 10F-12R Magnetic it Holder: M-490 1/4" Hex Plastic carrying case includes: Phillips bits: 6 ea. #1, #2, #3 Slotted bits: 3 ea. 4F-5R, 6F-8R, 10F-12R Pozidriv bits: 3ea. #1, #2, #3 Torx bits: 3 ea. T-10, T-15, T-20, T-25, T-30, T-40 Square bits: 3 ea. 3/32", 1/8" Quick Release Magnetic it Holder: QR-M-490-1/4" Hex Torx is a registered trademark of the amcar ivision of Textron. Pozidriv is a registered trademark of the Phillips Screw ompany. 61

69 Grip Plus Hand river Sets 5 and 8 Piece Sets GSP-5 5 piece Phillips Set with cloth carrying case includes: #2 x 1" #3 x 6" #4 x 3" #4 x 8" #2 x 4" GS-5 GS-8 GST-8 GS Pouch5 GS Pouch8 5 piece ombination Set with cloth carrying case includes: #1 x 3" Phillips 3/16" x 4" Slotted #2 x 4" Phillips 1/4" x 6" Slotted 3/8" x 8" Slotted 8 piece ombination with cloth carrying case includes: #1 x 3" Phillips 1/8" x 4" Slotted #2 x 4" Phillips 3/16" x 4" Slotted #3 x 6" Phillips 1/4" x 6" Slotted 5/32" x 6" Slotted 3/8" x 8" Slotted 8 piece Torx with cloth carrying case includes: T8 x 2.5" T25 x 4" T10 x 3" T27 x 4" T15 x 3" T30 x 4.5" T20 x 4" T40 x 5" 5 piece pouch only (slanted pocket) 8 piece pouch only 62

70 Hand rivers rivers with Self-ontained Insert its Replaceable it rivers Replaceable it rivers Magnetic Replaceable Socket Nut Runners Part Female Overall Length lade Projection Hex Size In. mm In. mm M-15-S 1/4 8 1/ /8 111 Phillips #1, #2, #3; Slotted 4F-5R, 10F-12R; hollow handle. M-15-S- 1/4 8 1/ /8 111 Without bits; hollow handle. M /4 8 1/ /8 111 Phillips #1, #2, #3; Slotted 4F-5R, 10F-12R; bit recesses in handle. M /4 8 1/ /8 111 Without bits; bit recesses in handle. Part Female Overall Length lade Projection Hex Size In. mm In. mm 1505-P 1/4 1 7/ P 1/4 2 3/4 70 7/ P 5/16 2 7/8 73 7/ P 1/4 7 1/ / P 5/ / Part Female Overall Length lade Projection Hex Size In. mm In. mm M-1505-P 1/4 2 3/8 60 3/8 10 M-1500-P 1/4 8 1/ /8 111 M-1550-P 5/ / Part rive Type Overall Length lade Projection Number Size Lock. In. mm In. mm SW-911-P 1/4" Sqr. Pin 7 1/ SW-911-P 1/4" Sqr. all 7 1/ SWS-911-* 1/4" Sqr. all 8 5/ /8 92 *Hollow handle with 3/16, 1/4, 5/16 and 3/8 sockets. Industrial it Kit 24 it Kit Tool kit includes plastic carrying case with: Magnetic hand driver and magnetic bit holder. Phillips bits: #1,#2, #3 Slotted bits: 3F-4R, 4F-5R, 6F-8R, 8F-10R, 10F-12R Torx bits: T-10. T-15, T-20, T-25, T-27, T-30, T-40 Square Recess bits: 3/32", 1/8" Hex bits: 5/64", 3/32", 7/64", 1/8", 9/64" Pozidriv bits: #1, #2 Pozidriv is a registered trademark of the Phillips Screw o. Torx is a registered trademark of the amcar ivision of Textron. 63

71 Hand rivers Torx Keys Part Number river Size Ref. Short rm In. mm Long rm In. mm 71-TX-06* T / / TX-07 T / / TX-08 T / / TX-09 T / / TX-10 T / TX-15 T / / TX-20 T / / TX-25 T / / TX-27 T / / TX-30 T / / TX-40 T / TX-45 T / / TX-50 T / / TX-55 T / / *T-6 key has Torx tip on short arm only. wls Part river Short rm Long rm Number Size Ref. In. mm In. mm W / / W-95-LS 7 1/ /8 79 W-95-L /8 105 W-95-LL 8 7/ W / Use awls to line up hole and scratch mark surfaces. Pivex Pivot rivers Part Overall Length Number In. mm 15PV /4" it Holder M-15PV /4" Magnetic it Holder MQR-15PV /4" Magnetic Quick-Release it Holder M-15PVH* /4" Magnetic it Holder, Hollow Handle with its M-15PVH /4" Magnetic it Holder, Hollow Handle without its *Includes Phillips #1, 2, 3 and Slotted 4F-5R, 10F-12R bits. The pex Pivex replaceable bit hand driver has a jointed shaft that allows the handle to pivot 180. This lets you apply five times more torque than an ordinary hand driver of the same length. 64

72 1/4" Hex rive Nutsetters for SE Sheet Metal Screws 6 Point Power rive Part Overall Socket Nose Number Size Length iameter 6 Point In. In. In. -08* 1/4 2 9/16 7/16 Non-magnetic -10* 5/16 2 9/16 1/2 Non-magnetic -12* 3/8 2 9/16 9/16 Non-magnetic M-08 1/4 1 3/4 7/16 Magnetic M-10 5/16 1 3/4 1/2 Magnetic M-12 3/8 1 3/4 9/16 Magnetic M-14 7/ /16 Magnetic M-08 1/4 2 9/16 7/16 Magnetic 5/16" Shank iameter M-10 5/16 2 9/16 1/2 Magnetic 5/16" Shank iameter M-12 3/8 2 9/16 9/16 Magnetic 5/16" Shank iameter M-14 7/16 2 9/16 5/8 Magnetic 5/16" Shank iameter M-08 1/4 2 9/16 7/16 Magnetic 3/8" Shank iameter M-10 5/16 2 9/16 1/2 Magnetic 3/8" Shank iameter M-12 3/8 2 9/16 9/16 Magnetic 3/8" Shank iameter Insert MHM /4 1 1/8 7/16 Magnetic MHM /16 1 1/8 1/2 Magnetic MHM /8 1 3/4 9/16 Magnetic 1/4" Hex rive Nutsetters for Metric Sheet Metal Screws 6 Point Power rive Part Overall Socket Nose Number Size Length iameter 6 Point mm mm mm M-6mm Magnetic M-7mm Magnetic M-8mm Magnetic M-10mm Magnetic Insert MHM-6mm Magnetic MHM-7mm Magnetic MHM-8mm Magnetic MHM-10mm Magnetic 65

73 1/4" Hex rive Nutsetters 6 Point and 6 Point Magnetic 6 Point, olt learance Part Part Overall Socket Nose Number Number Size Length iameter 6 Point Magnetic In. In. In. 6N M6N /16 2 5/16 6N M6N /16 3 5/16 6N /16 4 5/16 - M6N /16 5 5/16 6N M6N /16 6 5/16 6N M6N /4 2 7/16 6N M6N /4 3 7/16 6N M6N /4 4 7/16 6N M6N /4 5 7/16 6N M6N /4 6 7/16 6N M6N /16 2 1/2 6N M6N /16 3 1/2 6N M6N /16 4 1/2 6N M6N /16 5 1/2 6N M6N /16 6 1/2 6N M6N /32 2 9/16 6N M6N /32 3 9/16 6N M6N /8 2 9/16 6N M6N /8 3 9/16 6N M6N /8 4 9/16 6N M6N /8 6 9/16 6N M6N / /32 6N M6N / /32 6N M6N / /32 6N M6N / /32 6N M6N /2 2 3/4 6N M6N /2 3 3/4 6N M6N / /16 Part Overall Socket Nose epth of Number Size Length iameter learance () 6 Point In. In. In. In /4 3 1/4 7/16 1 3/ /32 3 1/4 1/2 1 3/ /16 3 1/4 1/2 1 3/ /32 3 1/4 9/16 1 3/ /8 3 1/4 9/16 1 3/ /16 3 1/4 21/32 1 3/ /2 3 1/4 3/4 1 3/ /16 3 1/4 13/16 1 3/ /8 3 1/4 7/8 1 3/8 See bolt clearance Tool Tip page

74 7/16" Hex rive Nutsetters 6 Point Part Overall Socket Nose Number Size Length iameter 6 Point In. In. In. 6N /16 3 9/16 6N /8 2 9/16 6N /8 3 9/16 6N /16 3 3/4 6N /2 3 13/16 6N /2 4 13/16 6N /2 6 13/16 6N /16 3 7/8 6N /16 4 7/8 6N /16 6 7/8 6N /16 8 7/8 6N / N / N / /8 6N / /8 5/8" Hex rive Nutsetters 6 Point Part Overall Socket Nose Number Size Length iameter 6 Point In. In. In. 6N / /8 6N / /8 TOOL TIP olt clearance nutsetters (see page 66) allow the bolt or stud to recess into the nutsetter body as the nut is driven down. olt clearance nutsetters are prefixed with the numbers

75 Hex Extensions Male Hex rive with 1/4" Male Square Part Hex rive Type of Overall Length Number In. Lock In. mm EX-250 1/4 Pin 1 3/8 35 EX-250-1/4 all 1 3/8 35 EX /4 Pin 2 51 EX /4 all 2 51 EX /4 Pin 3 76 EX /4 all 3 76 EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX-262 5/16 Pin 1 1/2 38 EX-262-5/16 all 1 1/2 38 EX /16 Pin 2 51 EX /16 all 2 51 EX /16 Pin 3 76 EX /16 Pin EX /16 all EX /16 Pin EX /16 all EX-251 7/16 Pin 1 3/8 35 EX-251-7/16 all 1 3/8 35 EX /16 Pin 2 51 EX /16 all 2 51 EX /16 Pin 3 76 EX /16 all 3 76 EX /16 Pin EX /16 all EX /16 Pin EX /16 Pin EX /16 Pin

76 Hex Extensions Male Hex rive with 3/8" Male Square Part Hex rive Type of Overall Length Number In. Lock In. mm EX-370 1/4 Pin 1 5/8 41 EX-370-1/4 all 1 5/8 41 EX /4 Pin 2 51 EX /4 all 2 51 EX /4 Pin 3 76 EX /4 all 3 76 EX /4 Pin EX /4 all EX /4 Pin EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX-380 5/16 Pin 1 1/2 38 EX-380-5/16 all 1 1/2 38 EX /16 Pin 2 51 EX /16 all 2 51 EX /16 Pin 3 76 EX /16 Pin EX /16 Pin EX-371 7/16 Pin 1 3/4 45 EX-371-7/16 all 1 3/4 45 EX /16 Pin 2 51 EX /16 all 2 51 EX /4 7/16 Pin 2 3/4 70 EX /16 Pin 3 76 EX /16 all 3 76 EX /16 Pin EX /16 all EX /16 Pin EX /16 Pin EX /16 all EX /16 Pin EX /16 Pin EX /16 Pin EX /16 Pin

77 Hex Extensions Male Hex rive with 1/2" Male Square Part Hex rive Type of Overall Length Number In. Lock In. mm EX /4 Pin 2 51 EX /4 all 2 51 EX /4 Pin 3 76 EX /4 all 3 76 EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX /16 Pin 2 51 EX /16 all 2 51 EX /16 Pin 3 76 EX /16 all EX /16 Pin 2 1/8 54 EX /16 all 2 1/8 54 EX /16 Pin 3 76 EX /16 all 3 76 EX /16 Pin EX /16 all EX /16 Pin EX /16 all EX /16 Pin EX /16 all EX /16 Pin EX /16 all EX /16 Pin EX /16 all EX /16 Pin EX /16 all EX /16 Pin EX-502 5/8 Pin 2 51 EX-502-5/8 all 2 51 EX /8 Pin 3 76 EX /8 all 3 76 EX /8 Pin EX /8 all EX /8 Pin EX /8 Pin EX /8 Pin

78 Extensions Male Hex rive with 5/8" Male Square Part Hex rive Type of Overall Length Number In. Lock In. mm EX /16 Pin 3 76 EX /16 Pin EX /8 Pin 3 76 EX /8 all 3 76 EX /8 Pin EX /8 Pin EX /8 Pin Male Hex rive with 3/4" Male Square Part Hex rive Type of Overall Length Number In. Lock In. mm EX /16 7/32 rill Hole 3 76 EX /16 all 3 76 EX /8 7/32 rill Hole EX /8 all EX /8 7/32 rill Hole EX /8 all EX /8 7/32 rill Hole EX /4 7/32 rill Hole Threaded Screw Shank Part Male Square Male Thread Overall Length ody iameter Number In. In. In. mm In. mm TH-256 1/4 1/ /8 41 7/16 11 TH-376 3/8 1/ /8 41 1/2 13 TH-250 1/4 1/ /8 41 7/16 11 TH-370 3/8 1/ /4 45 1/2 13 TH-252 1/4 1/ /4 45 7/16 11 TH-372 3/8 1/ /4 45 1/2 13 TH-254 1/ /4 45 3/8 10 Morse Taper Shank Part Male Square Morse Type of Overall Length Number In. Taper Lock In. mm MT-502 1/2 2 Pin MT-503 1/2 3 Pin MT-752 3/4 2 7/32 rill Hole MT-753 3/4 3 7/32 rill Hole MT-754 3/4 4 7/32 rill Hole

79 1/4" Male Hex Universal Wrenches, SE 6 Point, Standard and Tension Type Extension Standard Type Tension Type Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension In. () In. () In. () In. () In. (E) In. K /4 3 3/4 5/8 3/8 3/8 K /4 4 3/4 5/8 3/8 3/8 K-25-6 KS /4 6 3/4 5/8 3/8 3/8 K-25-9 KS /4 9 3/4 5/8 3/8 3/8 K KS /4 12 3/4 5/8 3/8 3/8 K /16 3 3/4 5/8 7/16 3/8 K /16 4 3/4 5/8 7/16 3/8 K-26-6 KS /16 6 3/4 5/8 7/16 3/8 K-26-9 KS /16 9 3/4 5/8 7/16 3/8 K KS / /4 5/8 7/16 3/8 K /16 3 3/4 3/4 7/16 5/16 K KS /16 6 3/4 3/4 7/16 5/16 - KS /16 9 3/4 3/4 7/16 5/16 K / /4 3/4 7/16 5/16 K /32 3 3/4 5/8 1/2 3/8 K-27-6 KS /32 6 3/4 5/8 1/2 3/8 K / /4 5/8 1/2 3/8 K /32 3 3/4 3/4 15/32 5/16 K KS /32 6 3/4 3/4 15/32 5/16 K /8 3 13/16 5/8 9/16 7/16 K /8 4 13/16 5/8 9/16 7/16 K-28-6 KS /8 6 13/16 5/8 9/16 7/16 K-28-9 KS /8 9 13/16 5/8 9/16 7/16 K KS / /16 5/8 9/16 7/16 K /8 3 13/16 3/4 9/16 3/8 K KS /8 6 13/16 3/4 9/16 3/8 K KS /8 9 13/16 3/4 9/16 3/8 K /16 3 7/8 5/8 5/8 1/2 K-29-6 KS /16 6 7/8 5/8 5/8 1/2 - KS /16 9 7/8 5/8 5/8 1/2 K / /8 5/8 5/8 1/2 K / /16 3/4 5/8 1/2 K KS / /16 3/4 5/8 1/2 K KS / /16 3/4 5/8 1/2 K /2 3 7/8 11/16 11/16 1/2 K /2 4 7/8 11/16 11/16 1/2 K-30-6 KS /2 6 7/8 11/16 11/16 1/2 K-30-9 KS /2 9 7/8 11/16 11/16 1/2 - KS /2 12 7/8 11/16 11/16 1/2 K / /4 3/4 9/16 K KS / /4 3/4 9/16 K KS / /4 3/4 9/16 K / /4 3/4 9/16 72

80 1/4" Male Hex Universal Wrenches, SE 6 Point, Standard and Tension Type Extension (continued) Standard Type Tension Type E Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension In. () In. () In. () In. () In. (E) In. K / /16 13/16 9/16 K / /16 13/16 9/16 K KS / /16 13/16 9/16 K KS / /16 13/16 9/16 K / /16 13/16 9/16 1/4" Male Hex Universal Wrenches, Metric 6 Point, Standard and Tension Type Extension Standard Type Tension Type Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension In. () mm () mm () mm () mm (E) mm K-5-7m K-5-7m K-5-7m-6 KS-5-7m K-5-7m-9 KS-5-7m KS-5-7m K-6-8m K-6-8m K-6-8m-6 KS-6-8m K-6-8m-9 KS-6-8m K-6-9m K-6-9m K-6-10m K-6-10m K-6-10m-6 KS-6-10m K-6-10m-9 KS-6-10m K-6-10m K-7-11m K-7-11m-6 KS-7-11m K-7-11m-9 KS-7-11m K-7-12m K-7-12m K-7-12m K-7-13m K-7-13m-6 KS-7-13m K-7-13m-9 KS-7-13m KS-7-13m

81 7/16" Hex rive Universal Wrenches, SE 6 Point, Standard and Tension Type Extension Standard Type Tension Type Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension In. () In. () In. () In. () In. (E) In. K /4 3 3/4 5/8 3/8 3/8 K /4 4 3/4 5/8 3/8 3/8 K-40-6 KT /4 6 3/4 5/8 3/8 3/8 K-40-9 KT /4 9 3/4 5/8 3/8 3/8 K /8 3 13/16 5/8 7/32 7/16 K /8 4 13/16 5/8 7/32 7/16 K-43-6 KT /8 6 13/16 5/8 7/32 7/16 - KT /8 9 13/16 5/8 7/32 7/16 K /16 3 7/8 5/8 5/8 1/2 K /16 4 7/8 5/8 5/8 1/2 K-44-6 KT /16 6 7/8 5/8 5/8 1/2 K-44-9 KT /16 9 7/8 5/8 5/8 1/2 K KT / /8 5/8 5/8 1/2 K /2 3 7/8 11/16 11/16 1/2 K /2 4 7/8 11/16 11/16 1/2 K-45-6 KT /2 6 7/8 11/16 11/16 1/2 K-45-9 KT /2 9 7/8 11/16 11/16 1/2 K KT /2 12 7/8 11/16 11/16 1/2 K / /4 3/4 9/16 K KT / /4 3/4 9/16 K KT / /4 3/4 9/16 K KT / /4 3/4 9/16 K / /8 11/16 15/32 K KT / /8 11/16 15/32 - KT / /8 11/16 15/32 K KT / /8 11/16 15/32 K / /16 7/16 K KT / /16 7/16 K KT / /16 7/16 K / /16 13/16 9/16 K / /16 13/16 9/16 K KT / /16 13/16 9/16 - KT / /16 13/16 9/16 K KT / /16 13/16 9/16 K / /16 7/8 3/4 17/32 K KT / /16 7/8 3/4 17/32 K KT / /16 7/8 3/4 17/32 K KT / /16 7/8 3/4 17/32 K KT / /8 1 3/4 9/16 74

82 7/16" Hex rive Universal Wrenches, SE 6 Point, Standard and Tension Type Extension (continued) Standard Type Tension Type E Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension In. () In. () In. () In. () In. (E) In. K KT / /8 1 3/4 9/16 K KT / /8 1 3/4 9/16 K KT / /8 1 3/4 9/16 K / /8 7/8 7/8 19/32 K / /8 7/8 7/8 19/32 K KT / /8 7/8 7/8 19/32 K KT / /8 7/8 7/8 19/32 K KT / /8 7/8 7/8 19/32 K / / /32 5/8 K / / /32 5/8 K KT / / /32 5/8 K KT / / /32 5/8 K KT / / /32 5/8 K / / /16 K KT / / /16 K KT / / /16 K KT / / /16 K / /4 1 1/8 1 1/8 11/16 K / /4 1 1/8 1 1/8 11/16 K KT / /4 1 1/8 1 1/8 11/16 K KT / /4 1 1/8 1 1/8 11/16 K KT / /4 1 1/8 1 1/8 11/16 7/16" Hex rive Universal Wrenches, Metric 6 Point, Standard and Tension Type Extension Standard Type Tension Type Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension mm () mm () mm () mm () mm (E) mm K-6-10m K-6-10m-6 KT-6-10m K-6-10m-9 KT-6-10m KT-6-10m K-7-11m K-7-11m K-7-11m-6 KT-7-11m K-7-11m

83 7/16" Hex rive Universal Wrenches, Metric 6 Point, Standard and Tension Type Extension (continued) Standard Type Tension Type E Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension mm () mm () mm () mm () mm (E) mm K-7-12m K-7-12m K-7-13m K-7-13m K-7-13m-6 KT-7-13m K-7-13m-9 KT-7-13m K-7-13m K-7-14m K-7-14m K-7-14m-6 KT-7-14m K-7-14m-9 KT-7-14m KT-7-14m KT-7-15m KT-7-15m K-8-15m-6 KT-8-15m K-8-15m-9 KT-8-15m K-8-15m-12 KT-8-15m K-8-16m K-8-16m-6 KT-8-16m K-8-16m-9 KT-8-16m K-8-17m-12 KT-8-16m K-8-17m K-8-17m-6 KT-8-17m K-8-17m-9 KT-8-13m K-8-17m-12 KT-8-13m K-8-18m K-8-18m-6 KT-8-18m K-8-18m-9 KT-8-18m K-8-18m-12 KT-8-18m K-10-19m K-10-19m-6 KT-10-19m K-10-19m KT-10-19m Universal wrenches must not be used with impact drivers. Maximum operating angle is

84 In this section Impact Sockets pex industrial grade impact sockets are available in a wide range of lengths and wall thicknesses, and with single or double hex openings. Square openings are available in select sizes. Fixed Magnetic Sockets Magnetic sockets hold the fastener in driving position, even when working straight down. Time-wasting motions are eliminated when starting fasteners or working in hard-to-reach areas. These sockets are identified with a M- prefix. Magnetic olt learance Sockets s the nut is run down, a spring-loaded or hollow cylinder magnet allows the bolt or stud to retract into the socket body. Nuts are held firmly in the socket. These sockets are identified with a M- prefix. Surface rive Sockets Large openings on the six corners of the opening create a floating action that allows the socket to slip quickly and easily onto the nut or bolt. Ideal for compensating for imperfect alignment between the tool and fastener. Not generally recommended for impact use. These sockets are identified with a SF- prefix. Fast Lead Sockets esigned for power tool and multiple spindle power tools, a specially tapered opening provides complete engagement with the nut almost instantly upon engagement. This speeds productivity and extends tool life. Engagement is possible without starting and stopping the tool for each nut. These sockets are identified with a FL- prefix. Special Sockets You ll find Spline, Torx, tap holding, udd Wheel, grease fitting and other sockets for special applications. Extensions and dapters pex provides the accessories needed to adapt sockets to nearly every tool and application. Square rive Universal Wrenches Hard-to-reach areas are no problem with pex s wide range of universal and extension universal wrenches. 77

85 1/4" Square rive Sockets, SE Standard Length, 6 Point and 12 Point inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /32 7/8 1/4 1/2 3/ /16 7/8 5/16 1/2 3/ /32 7/8 3/8 1/2 5/ /4 7/8 3/8 1/2 5/32 X-1108* - 1/4 7/8 3/8 1/2 5/ /32 1 7/16 1/2 3/ /16 1 1/2 1/2 3/16 X-1110* - 5/16 1 1/2 1/2 3/16 H-510-5/16 7/8 7/16 7/16 3/ /32 1 1/2 1/2 3/ /8 1 9/16 9/16 1/ /32 1 5/8 5/8 1/ /16 1 5/8 5/8 9/ / /16 11/16 9/ /2 1 11/16 11/16 11/ /32 1 3/4 3/4 11/ / /16 13/16 7/ /32 1 7/8 7/8 7/ /8 1 7/8 7/8 7/16 * Parts have a harder heat treat. Long Length, 6 Point and 12 Point inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /16 1 3/4 5/16 1/2 3/ /32 1 3/4 3/8 1/2 5/ /4 1 3/4 3/8 1/2 5/ /32 1 3/4 7/16 1/2 3/ /16 1 3/4 1/2 1/2 3/ /32 1 3/4 1/2 1/2 3/ /8 1 3/4 9/16 9/16 1/ /32 1 3/4 5/8 5/8 1/ /16 1 3/4 5/8 5/8 9/ /32 1 3/4 11/16 11/16 9/ /2 1 3/4 11/16 11/16 11/ /32 1 3/4 3/4 3/4 11/ /16 1 3/4 13/16 13/16 7/ /8 2 7/8 7/8 7/16 78

86 1/4" Square rive Sockets, SE Extra Long Length, 6 Point and 12 Point inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /4 3 3/8 1/2 5/ /32 3 3/8 1/2 5/ /16 3 1/2 1/2 3/ /32 3 1/2 1/2 3/ /8 3 9/16 9/16 1/ /32 3 9/16 9/16 1/ /16 3 5/8 5/8 9/ /2 3 11/16 11/16 11/ / /16 13/16 7/ /8 3 7/8 7/8 7/16 Magnetic, Standard Length, 6 Point inches Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet In. () () () () M /32 7/8 5/16 1/2 3/32 M /16 7/8 5/16 1/2 3/32 M /32 7/8 3/8 1/2 5/32 MX-1108* 1/4 7/8 3/8 1/2 5/32 M-1108-E* 1/4 7/8 3/8 1/2 5/32 MX-1109* 9/32 1 7/16 1/2 3/16 M /16 1 1/2 1/2 3/16 MX-1110* 5/16 1 1/2 1/2 3/16 MX /32 1 1/2 1/2 3/16 MH-510 5/16 7/8 7/16 7/16 3/16 M /8 1 9/16 9/16 1/4 MX-1112* 3/8 1 9/16 9/16 1/4 M /16 1 5/8 5/8 9/32 M /2 1 11/16 11/16 11/32 M / /16 11/16 11/32 M /8 1 11/16 11/16 11/32 *Parts have a harder heat treat; MX-1108-E has no lead-in chamfer. 1/4" Square rive Sockets, SE Magnetic, Long and Extra Long Length, 6 Point Part Part Hex Overall iameter iameter Opening Fixed Magnetic olt Opening Length Nose End rive End epth Magnet learance In. () () () () - M /16 1 3/4 5/16 1/2 5/32 M-1208 M /4 1 3/4 3/8 1/2 5/32 - M /4 3 3/8 1/2 5/32 M-1209 M /32 1 3/4 7/16 1/2 3/16 M-1210 M /16 1 3/4 1/2 1/2 3/16 79

87 1/4" Square rive Sockets, SE Magnetic, Long Length and Extra Long, 6 Point inches Part Part Hex Overall iameter iameter Opening Fixed Magnetic olt Opening Length Nose End rive End epth Magnet learance In. () () () () M-1211 M /32 1 3/4 1/2 1/2 3/16 - M /32 3 1/2 1/2 3/16 M-1212 M /8 1 3/4 9/16 9/16 1/4 - M /8 3 9/16 9/16 1/4 M-1214 M /16 1 3/4 5/8 5/8 9/32 - M /16 3 5/8 5/8 9/32 M-1216 M /2 1 3/4 11/16 11/16 11/32 - M /16 1 3/4 13/16 13/16 7/16 * For explanation of magnets, see Tool Tip on page 120. Surface rive and Fast Lead, Standard and Long Length Part Part Hex Overall iameter iameter Opening Surface Number Opening Length Nose End rive End epth rive Fast Lead In. () () () () - FL /4 7/8 3/8 1/2 5/32 - FL /32 7/8 3/8 1/2 5/32 - FL /16 1 1/2 1/2 3/16 - FL /32 1 1/2 1/2 3/16 SF-1112 FL /8 1 9/16 9/16 1/4 SF-1212 FL /8 1 3/4 9/16 9/16 1/4 SF-1114 FL /16 1 5/8 5/8 9/32 - FL /16 1 3/4 5/8 5/8 9/32 SF-1116 FL /2 1 11/16 11/16 11/32 - FL /2 1 3/4 11/16 11/16 11/32 SF-1118 FL / /16 13/16 7/16 inches 1/4" Square rive Sockets For SE Sheet Metal Screws 6 Point and 6 Point Magnetic, For Predrilled Holes* Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic In. () () () () 1E06 M1E06 3/16 7/8 5/16 1/2 3/32 1E07 M1E07 7/32 7/8 3/8 1/2 5/32 1E08 M1E08 1/4 7/8 3/8 1/2 5/32 1E09 M1E09 9/32 7/8 7/16 1/2 3/16 1E10 M1E10 5/16 7/8 1/2 1/2 3/16 1E11 M1E11 11/32 1 1/2 1/2 3/16 1E12 M1E12 3/8 1 5/8 5/8 1/4 1E14 M1E14 7/ /16 11/16 9/32 1E16 M1E16 1/2 1 11/16 11/16 11/32 inches 80

88 1/4" Square rive Sockets For SE Sheet Metal Screws 6 Point and 6 Point Magnetic, for Self-rilling and Tapping Screws* Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic In. () () () () 1P06 M1P06 3/16 7/8 5/16 1/2 3/32 1P07 M1P07 7/32 7/8 3/8 1/2 5/32 1P08 M1P08 1/4 7/8 7/16 1/2 5/32 1P09 M1P09 9/32 7/8 1/2 1/2 3/16 1P10 M1P10 5/16 7/8 1/2 1/2 3/16 1P11 M1P11 11/32 1 1/2 1/2 3/16 1P12 M1P12 3/8 1 5/8 5/8 1/4 1P14 M1P14 7/ /16 11/16 9/32 1P16 M1P16 1/2 1 11/16 11/16 11/32 inches * Sockets for predrilled holes are intermediate hardness; sockets for self-drilling and tapping screws are maximum hardness. 1/4" Square rive Sockets For SE Square Nuts Single Square and ouble Square Part Part Hex Overall iameter iameter Opening Number ouble Opening Length Nose End rive End epth Square Square In. () () () () /4 1 1/2 1/2 3/ /32 1 9/16 9/16 3/ /16 1 5/8 5/8 1/ /32 1 3/4 3/4 1/ /8 1 3/4 3/4 1/ / /16 13/16 9/32 inches 1/4" Square rive Universal Wrenches, SE 6 Point and 12 Point Part Part Hex Overall Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth 6 Point 12 Point In. () () () () (E) S-25 S-25-1/4 1 7/32 3/4 5/8 3/8 3/8 S-26 S-26-5/ /32 3/4 5/8 7/16 3/8 S-28 S-28-3/8 1 19/32 13/16 5/8 17/32 7/16 S-29 S-29-7/ /32 7/8 5/8 5/8 1/2 S-30 S-30-1/2 1 21/32 7/8 11/16 11/16 1/2 S-65-9/ /32 7/8 11/16 11/16 1/2 E Universal wrenches must not be used with impact drivers. Maximum operating angle is

89 1/4" Square rive Sockets, Metric Standard Length, 6 Point and 12 Point mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point mm () () () () 3.5mm mm mm mm mm mm11 6mm mm11 7mm mm11 8mm mm11 9mm mm11 10mm mm11 11mm mm11 12mm mm11 13mm mm11 14mm mm11 15mm mm Long Length, 6 Point and 12 Point Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point mm () () () () 5mm mm mm mm21 7mm mm21 8mm mm21 9mm mm21 10mm mm21 11mm mm21 12mm mm21 13mm mm mm21 15mm mm mm 82

90 1/4" Square rive Sockets, Metric Magnetic, Standard Length, 6 Point Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet mm () () () () mm M-5mm M-5.5mm M-6mm M-7mm M-8mm M-9mm M-10mm M-11mm M-12mm M-13mm M-14mm M-15mm Magnetic, Long Length, 6 Point mm * For an explanation of magnets, see Tool Tip on page 120. Part Part Hex Overall iameter iameter Opening Fixed Magnetic olt Opening Length Nose End rive End epth Magnet learance mm () () () () M-5mm21 M-5mm M-5.5mm M-6mm21 M-6mm M-7mm21 M-7mm M-8mm21 M-8mm M-9mm21 M-9mm M-10mm21 M-10mm M-11mm21 M-11mm M-12mm21 M-12mm M-13mm21 M-13mm M-14mm21 M-14mm M-15mm M-16mm Surface rive, Standard and Long Length mm Part Number Hex Overall iameter iameter Opening Surface Opening Length Nose End rive End epth rive mm () () () () SF-10mm SF-10mm SF-11mm SF-11mm SF-12mm SF-13mm SF-13mm SF-14mm SF-14mm SF-15mm

91 1/4" Square rive Sockets For Metric Sheet Metal Screws 84 6 Point and 6 Point Magnetic E Standard and Long Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic mm () () () () 3.5mmE1 M-3.5mmE mmE1 M-4mmE mmE1 M-4.5mmE mm11 M-5mmE mmE1 M-5.5mmE mmE1 M-6mmE mmE1 M-7mmE mmE1 M-8mmE mmE1 M-9mmE mmE1 M-10mmE mmE1 M-11mmE mmE1 M-12mmE mmE1 M-13mmE /4" Square rive Universal Wrenches, Metric mm 6 Point Part Hex Overall Socket Socket Nose End Opening Number Opening Length Length iameter iameter epth 6 Point mm () () () () (E) S-15-6m S-15-7m S-16-8m S-16-10m Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 1/4" Square rive Sockets For Spline Fasteners Overall iameter iameter Part Spline Nominal Length () Nose End () rive End () Number Size Size In. mm In. mm In. mm MS /32 7/ /64 8 7/16 11 MS / /64 8 7/16 11 MS /4 7/8 22 3/8 10 7/16 11 MS / /8 10 7/16 11 MS /32 7/8 22 7/ /16 11 MS / / /16 11 MS /16 7/ / /64 12 MS / / /64 12 MS /8 7/ / /32 14 MS / / /64 16 pex spline sockets conform to military specifications MS and MIL-W-8982.

92 1/4" Square rive Torx Sockets For External Torx Screws Overall Nose End rive End Part river Length () iameter () iameter () Number Size In. mm In. mm In. mm TX-1104 E / / TX-1105 E / / TX-1106 E / / TX-1108 E / / TX-1110 E / / TX-1112 E / / For External Torx Screws, Thin Wall Overall Nose End rive End Part river Length () iameter () iameter () Number Size In. mm In. mm In. mm TX-1404 E / / TX-1405 E / / TX-1406 E / / TX-1407 E / / TX-1408 E / / TX-1410 E / / TX-1411 E / / TX-1412 E / / For Torx Nuts Overall Nose End rive End Part river Length () iameter () iameter () Number Size In. mm In. mm In. mm TX-1E04 E-4 7/ / / TX-1E05 E-5 7/ / / TX-1E06 E-6 7/ / / TX-1E08 E-8 7/ / / TX-1E10 E / / TX-1E12 E / / Sockets for Torx nuts have a larger lead-in chamfer than sockets for external Torx screws. Most Torx sockets have a IN (pin and o-ring) groove. id you know...? Like Torx screws, Torx bolts are becoming commonplace in a variety of assembly applications. pex offers a wide variety of Torx sockets. 85

93 1/4" Square rive Extensions 7/8" to 14" (22mm to 356mm) Length Part Male Square Type of Overall Length Number In. Lock In. mm EX-252 1/4 Pin 7/8 22 EX-252-1/4 all 1 25 EX /4 Pin 2 51 EX /4 all 2 51 EX /4 Pin 3 76 EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX /4 Pin EX /4 Pin EX /4 Pin EX /4 Pin /4" Square rive dapters 1/4" to 3/8" Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX-372 3/8 1/4 Pin 1 0 EX-372-3/8 1/4 all /4" Square rive Universal dapters Male Square to Female Square Part Male Female Type of Overall Length Largest iameter Number Sq. In. Sq. In. Lock In. mm In. mm MF-25 1/4 1/4 Pin 1 5/8 41 5/8 16 MF-25 1/4 1/4 all 1 5/8 41 5/8 16 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. TOOL TIP universal adapter gives all of your sockets the versatility of a universal wrench. Universal adapters must not be used with impact drivers. 86

94 3/8" Square rive Sockets, SE 6 Point and 12 Point, Short and Standard Length inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /4 1 1/4 7/16 3/4 5/ /32 1 1/4 7/16 3/4 3/ /16 7/8 1/2 3/4 3/ /16 1 1/4 1/2 3/4 3/ /32 1 1/4 1/2 3/4 3/ /8 7/8 19/32 3/4 3/ /8 1 1/4 19/32 3/4 1/ /32 1 1/2 11/16 3/4 1/ /16 7/8 11/16 3/4 9/ /16 1 1/2 11/16 3/4 9/32 SW-604 SW-604-7/16 1 1/2 21/32 3/4 9/ /32 1 1/2 3/4 3/4 9/ /2 7/8 13/16 13/16 5/ /2 1 1/2 13/16 13/16 11/32 H-3816 H /2 1 1/2 11/16 11/16 11/ /32 1 1/2 13/16 13/16 11/ /16 7/8 7/8 7/8 5/ /16 1 1/2 7/8 7/8 7/16 SW-343 SW-343-9/16 1 1/2 3/4 3/4 7/16 SW-605 SW-605-9/16 1 1/2 3/4 13/16 7/ /32 1 1/2 7/8 7/8 7/ /8 1 15/16 15/16 7/ /8 1 1/2 15/16 15/16 7/ /32 1 1/2 15/16 15/16 7/ / / /16 1 1/ / / /16 1 1/16 7/ /4 1 1/2 1 1/16 1 1/16 15/ / /8 1 1/8 7/ /16 1 1/2 1 1/8 1 1/8 7/ / /4 1 1/4 7/16 87

95 3/8" Square rive Sockets, SE 6 Point and 12 Point, Thin Wall, Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /4 1 1/4 7/16 3/4 5/ /32 1 1/4 7/16 3/4 3/ /16 1 1/4 1/2 3/4 3/ /32 1 1/4 1/2 3/4 3/ /8 1 1/2 19/32 3/4 1/ /16 1 1/2 5/8 3/4 9/ /2 1 1/2 3/4 3/4 11/ /16 1 1/2 25/32 13/16 7/ /8 1 1/2 7/8 7/8 7/ /16 1 1/2 15/16 15/16 7/ /4 1 1/ / /16 1 1/2 1 1/8 1 1/8 17/ /8 1 1/2 1 3/16 1 1/4 9/ /16 1 1/2 1 5/16 1 5/16 5/ /2 1 3/8 1 3/8 5/ /16 1 1/2 1 1/2 1 1/2 11/16 inches 6 Point and 12 Point, Long and Extra Long Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /4 2 7/16 3/4 5/ /4 3 1/2 7/16 3/4 5/ /32 2 7/16 3/4 3/ /16 2 1/2 3/4 3/ /16 3 1/2 1/2 3/4 3/ /32 2 1/2 3/4 3/ /32 3 1/2 1/2 3/4 3/ /8 2 19/32 3/4 1/ /8 3 1/2 19/32 3/4 1/ / /16 3/4 9/ /16 3 1/2 11/16 3/4 9/ /2 2 13/16 13/16 11/ /2 3 1/2 13/16 13/16 11/ /16 2 7/8 7/8 7/ /16 3 1/2 7/8 7/8 7/ /8 2 15/16 15/16 7/ /8 3 1/2 15/16 15/16 7/ / / /16 3 1/ / / /16 1 1/16 15/ /4 3 1/2 1 1/16 1 1/16 15/ / /4 1 1/4 17/ /16 3 1/2 1 1/4 1 1/4 17/ / /4 1 1/4 9/ /8 3 1/2 1 1/4 1 1/4 9/16 88 inches

96 3/8" Square rive Sockets, SE 6 Point and 12 Point, Thin Wall, Long Length inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /16 2 1/2 3/4 3/ /32 2 1/2 3/4 3/ /8 2 19/32 3/4 1/ /8 2 5/8 3/4 1/ /16 2 5/8 3/4 9/ /2 2 3/4 3/4 11/ / /32 13/16 7/ / /16 15/16 7/ / / / /16 1 5/16 5/ /8 1 3/8 5/ / /2 1 1/2 11/16 Magnetic, Short and Standard Length Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet In. () () () () M /4 1 1/4 7/16 3/4 5/32 M /32 1 1/4 7/16 3/4 3/16 M /16 1 1/4 1/2 3/4 3/16 M /32 1 1/4 1/2 3/4 3/16 M /8 7/8 19/32 3/4 3/16 M /8 1 1/4 19/32 3/4 1/4 M /16 7/8 11/16 3/4 9/32 M /16 1 1/2 11/16 3/4 9/32 MSW-604 7/16 1 1/2 21/32 3/4 9/32 M /32 1 1/2 3/4 3/4 9/32 M /2 7/8 13/16 13/16 5/16 M /2 1 1/2 13/16 13/16 11/32 MH /2 1 1/2 11/16 11/16 11/32 M /32 1 1/2 13/16 13/16 11/32 M /16 1 1/2 7/8 7/8 7/16 MSW-343 9/16 1 1/2 3/4 3/4 7/16 M /32 1 1/2 7/8 7/8 7/16 M /8 1 1/2 15/16 15/16 7/16 M /16 1 1/ /16 inches 89

97 3/8" Square rive Sockets, SE Magnetic, Thin Wall, Standard Length Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet In. () () () () M /4 1 1/4 7/16 3/4 5/32 M /32 1 1/4 7/16 3/4 3/16 M /16 1 1/4 1/2 3/4 3/16 M /32 1 1/4 1/2 3/4 3/16 M /8 1 1/2 19/32 3/4 1/4 M /16 1 1/2 5/8 3/4 9/32 M /2 1 1/2 3/4 3/4 11/32 M /16 1 1/2 25/32 13/16 7/16 M /8 1 1/2 7/8 7/8 7/16 M /4 1 1/ /32 M /16 1 1/2 1 1/8 1 1/8 17/32 M /16 1 1/2 1 5/16 1 5/16 17/32 inches Magnetic, Long Length and Extra Long Length Part Part Hex Overall iameter iameter Opening Fixed Magnetic olt Opening Length Nose End rive End epth Magnet learance In. () () () () M-3212 M /8 2 19/32 3/4 1/4 M-3214 M / /16 3/4 9/32 - M /16 3 1/2 11/16 3/4 9/32 M-3216 M /2 2 13/16 13/16 11/32 M-3218 M /16 2 7/8 7/8 7/16 - M /16 3 1/2 7/8 7/8 7/16 - M /8 2 15/16 15/16 7/16 inches Magnetic, Thin Wall, Long Length Part Part Hex Overall iameter iameter Opening Fixed Magnetic olt Opening Length Nose End rive End epth Magnet learance In. () () () () - M /8 2 19/32 3/4 1/4 M-3514 M /16 2 5/8 3/4 9/32 - M /2 2 3/4 3/4 11/32 inches 90

98 3/8" Square rive Sockets, SE Surface rive and Fast Lead, Short and Standard Length Part Part Hex Overall iameter iameter Opening Surface Number Opening Length Nose End rive End epth rive Fast Lead In. () () () () SF-3108 FL /4 1 1/4 7/16 3/4 5/32 SF /16 7/8 1/2 3/4 3/16 SF-3110 FL /16 1 1/4 1/2 3/4 3/16 SF-3012 FL /8 7/8 19/32 3/4 3/16 SF-3112 FL /8 1 1/4 19/32 3/4 1/4 SF-3014 FL /16 7/8 11/16 3/4 9/32 SF-3114 FL /16 1 1/2 11/16 3/4 9/32 SF-3016 FL /2 7/8 13/16 13/16 5/16 SF-3116 FL /2 1 1/2 13/16 13/16 11/32 SF-H3816-1/2 1 1/2 11/16 11/16 11/32 SF-3018 FL /16 7/8 7/8 7/8 5/16 SF-3118 FL /16 1 1/2 7/8 7/8 7/16 - FL /32 1 1/2 7/8 7/8 7/16 - FL /8 1 15/16 15/16 7/16 SF-3120 FL /8 1 1/2 15/16 15/16 7/16 - FL / /16 15/16 7/16 SF-3122 FL /16 1 1/ /16 - FL / /16 1 1/16 7/16 SF-3124 FL /4 1 1/2 1 1/16 1 1/16 15/32 SF / /4 1 1/4 9/16 inches Surface rive and Fast Lead, Thin Wall, Standard Length Part Part Hex Overall iameter iameter Opening Surface Number Opening Length Nose End rive End epth rive Fast Lead In. () () () () - FL /16 1 1/4 1/2 3/4 3/16 SF-3412 FL /8 1 1/2 19/32 3/4 1/4 SF-3414 FL /16 1 1/2 5/8 3/4 9/32 SF /2 1 1/2 3/4 3/4 11/32 SF /16 1 1/2 25/32 13/16 7/16 SF /8 1 1/2 7/8 7/8 7/16 SF /16 1 1/2 15/16 15/16 7/16 SF /16 1 1/2 1 5/16 1 5/16 7/16 SF /2 1 3/8 1 3/8 5/8 inches 91

99 3/8" Square rive Sockets, SE Surface rive and Fast Lead, Long and Extra Long Length Part Part Hex Overall iameter iameter Opening Surface Number Opening Length Nose End rive End epth rive Fast Lead In. () () () () inches - FL /16 2 1/2 3/4 3/16 SF-3212 FL /8 2 19/32 3/4 1/4 SF-3312 FL /8 3 1/2 19/32 3/4 1/4 SF-3214 FL / /16 3/4 9/32 SF-3314 FL /16 3 1/2 11/16 3/4 9/32 SF-3216 FL /2 2 13/16 13/16 11/32 SF-3316 FL /2 3 1/2 13/16 13/16 11/32 SF-3218 FL /16 2 7/8 7/8 7/16 SF-3318 FL /16 3 1/2 7/8 7/8 7/16 SF-3220 FL /8 2 15/16 15/16 7/16 SF-3320 FL /8 3 1/2 15/16 15/16 7/16 SF / /16 SF /16 3 1/ /16 SF / /16 1 1/16 15/32 SF-3324 FL /4 3 1/2 1 1/16 1 1/16 15/32 SF / /4 1 1/4 17/32 - FL /16 3 1/2 1 1/4 1 1/4 17/32 Surface rive, Thin Wall, Long Length Part Hex Overall iameter iameter Opening Surface Opening Length Nose End rive End epth rive In. () () () () SF /8 2 19/32 3/4 1/4 SF /16 2 5/8 3/4 9/32 SF /2 2 3/4 3/4 11/32 SF / /32 13/16 7/16 SF / /32 inches TOOL TIP Use surface drive sockets if tools are still running when they engage the fasteners (such as on this multi-spindle machine). They re easier to engage and will result in less tool wear. 92

100 3/8" Square rive Sockets For SE Sheet Metal Screws 6 Point and 6 Point Magnetic, For Predrilled Holes* Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic In. () () () () 3E06-3/16 1 1/4 5/16 3/4 3/32 3E07-7/32 1 1/4 3/8 3/4 5/32 3E08 M3E08 1/4 1 1/4 7/16 3/4 5/32 3E09 M3E09 9/32 1 1/4 7/16 3/4 3/16 3E10 M3E10 5/16 1 1/4 1/2 3/4 3/16 3E11 M3E11 11/32 1 1/4 1/2 3/4 3/16 3E12 M3E12 3/8 1 1/4 19/32 3/4 1/4 3E14 M3E14 7/16 1 1/4 11/16 3/4 9/32 3E16 M3E16 1/2 1 1/2 13/16 13/16 11/32 3E18 M3E18 9/16 1 1/2 7/8 7/8 7/16 6 Point and 6 Point Magnetic, For Self-Tapping Screws* Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic In. () () () () 3P06 M3P06 3/16 1 1/4 5/16 3/4 3/32 3P07 M3P07 7/32 1 1/4 3/8 3/4 5/32 3P08 M3P08 1/4 1 1/4 7/16 3/4 5/32 3P09 M3P09 9/32 1 1/4 7/16 3/4 3/16 3P10 M3P10 5/16 1 1/4 1/2 3/4 3/16 3P11 M3P11 11/32 1 1/4 9/16 3/4 3/16 3P12 M3P12 3/8 1 1/4 5/8 3/4 1/4 3P14 M3P14 7/16 1 1/4 11/16 3/4 9/32 3P16 M3P16 1/2 1 1/2 13/16 13/16 11/32 3P18 M3P18 9/16 1 1/2 7/8 7/8 7/16 *Sockets for predrilled holes are intermediate hardness; sockets for self-tapping screws are maximum hardness. 3/8" Square rive Sockets For SE Square Nuts inches inches Single Square and ouble Square inches Part Part Square Overall iameter iameter Opening Number ouble Opening Length Nose End rive End epth Square Square In. () () () () /32 1 1/2 7/16 3/4 3/ /4 1 1/2 1/2 3/4 3/ /32 1 1/2 9/16 3/4 3/ /16 1 1/2 5/8 3/4 1/ /8 1 1/2 3/4 3/4 1/ /16 1 1/2 7/8 7/8 9/ /2 1 1/ / /16 1 1/ / /8 1 1/2 1 1/8 1 1/8 7/ /16 1 1/2 1 1/4 1 1/4 7/ /4 1 1/2 1 3/8 1 3/8 15/32 93

101 3/8" Square rive Socket Sets, SE 6 Point PS38 8 piece, standard length: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 PS38L 8 piece, long length: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 3/8" Square rive Universal Wrenches, SE 6 Point and 12 Point E Part Part Hex Overall Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth 6 Point 12 Point In. () In. () In. () In. () In. (E) In. S-120 S-120-5/ /64 3/4 3/4 7/16 5/16 S-122 S-122-3/8 1 57/64 13/16 3/4 9/16 3/8 S-200-3/8 1 15/16 7/8 7/8 9/16 11/32 S-123 S-123-7/16 2 1/64 15/16 3/4 19/32 1/2 S-201-7/ /16 7/8 5/8 13/32 S-124 S-124-1/2 2 5/64 1 3/4 3/4 9/16 S-202 S-202-1/2 2 1/16 1 7/8 11/16 15/32 S-301-1/2 2 1/ /16 7/16 S-125 S-125-9/16 2 1/8 1 13/16 13/16 9/16 S-203 S-203-9/16 2 1/16 1 1/16 7/8 3/4 17/32 S-302-9/16 2 1/8 1 1/8 1 3/4 9/16 S-205 S-205-5/8 2 1/8 1 1/8 7/8 7/8 19/32 S-304-5/8 2 3/16 1 3/ /32 5/8 S /16 2 5/16 1 1/ /16 S-306 S-306-3/4 2 5/16 1 1/4 1 1/8 1 1/8 11/16 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 3/8" Square rive Universal Wrench Set, SE 6 Point PU37 7 piece, standard length: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 TOOL TIP Universal wrenches are available with a longer socket to allow a stud to recess into the socket opening. heck with your pex representative for details. 94

102 3/8" Square rive Universal Wrenches, SE Extension 6 Point, Standard and Tension Type Tension Type Standard Type Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E Part Part Hex Overall Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth 6 Point 12 Point In. () In. () In. () In. () In. (E) In. K /8 3 13/16 5/8 17/32 7/16 K /8 4 13/16 5/8 17/32 7/16 K-43-6 K /8 6 13/16 5/8 17/32 7/16 - K /8 9 13/16 5/8 17/32 7/16 K /16 3 7/8 5/8 5/8 1/2 K /16 4 7/8 5/8 5/8 1/2 K-44-6 K /16 6 7/8 5/8 5/8 1/2 - K /16 9 7/8 5/8 5/8 1/2 - K / /8 5/8 5/8 1/2 K / /16 3/4 19/32 1/2 K / /16 3/4 19/32 1/2 K K / /16 3/4 19/32 1/2 K /2 3 7/8 11/16 11/16 1/2 K /2 4 7/8 11/16 11/16 1/2 K-45-6 K /2 6 7/8 11/16 11/16 1/2 K-45-9 K /2 9 7/8 11/16 11/16 1/2 K K /2 12 7/8 11/16 11/16 1/2 K / /4 3/4 9/16 K / /4 3/4 9/16 K K / /4 3/4 9/16 K / /4 3/4 9/16 K K / /4 3/4 9/16 K K / /16 13/16 9/16 K K / /16 13/16 9/16 K K / /16 13/16 9/16 K K / /16 13/16 9/16 K K / /16 13/16 9/16 K / /8 7/8 7/8 19/32 K K / /8 7/8 7/8 19/32 - K / /8 7/8 7/8 19/32 Tension Type Standard Type TOOL TIP universal wrench with a tension sleeve holds the socket at the desired driving angle while aligning the tool and fastener. Other universal wrench sockets can flop making engagement difficult. 95

103 3/8" Square rive Socket Head its, SE 96 omplete, dapter Only, Insert Only See page 35 for more 3/8" drive complete socket head bits. 3/8" Square rive Sockets, Metric Part Number Overall Length dapter Insert Hex Length of Insert () omplete Only Only Size In. mm In. mm SZ-10 S-314 SZ-10-1/8 2 3/ /8 35 SZ-11 S-314 SZ-11-5/32 2 3/ /8 35 SZ-12 S-314 SZ-12-3/16 2 3/ /8 35 SZ-13 S-314 SZ-13-7/32 2 3/ /8 35 SZ-14 S-314 SZ-14-1/4 2 3/ /8 35 SZ-15 S-314 SZ-15-5/16 2 3/ /8 35 SZ-16 S-314 SZ-16-3/8 2 3/ / Point and 12 Point, Short and Standard Length mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point mm () () () () 6mm mm mm mm mm13 8mm mm03 9mm mm13 9mm mm03 10mm mm13 10mm mm03 11mm mm13 11mm mm03 12mm mm13 12mm mm03 13mm mm13 13mm mm03 14mm mm13 14mm mm03 15mm mm13 15mm mm03 16mm mm13 16mm mm03 17mm mm13 17mm mm03 18mm mm13 18mm mm03 19mm mm13 19mm mm mm mm mm mm mm

104 3/8" Square rive Sockets, Metric 6 Point and 12 Point, Thin Wall, Standard Length mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point mm () () () () 6mm mm43 7mm mm43 8mm mm43 9mm mm43 10mm mm43 11mm mm43 12mm mm43 13mm mm43 14mm mm43 15mm mm43 16mm mm43 17mm mm43 18mm mm43 19mm Point and 12 Point, Long and Extra Long Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point mm () () () () 6mm mm mm23 8mm mm23 9mm mm23 10mm mm mm23 11mm mm23 12mm mm23 13mm mm mm23 14mm mm23 15mm mm33 15mm mm23 16mm mm23 17mm mm23 18mm mm23 19mm mm23 20mm mm mm mm 97

105 3/8" Square rive Sockets, Metric Magnetic, Short and Standard Length Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet mm () () () () M-6mm M-7mm M-8mm M-9mm M-10mm M-10mm M-11mm M-11mm M-12mm M-12mm M-13mm M-13mm M-14mm M-15mm M-15mm M-16mm M-17mm M-18mm M-18mm mm Magnetic, Thin Wall, Standard Length Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet mm () () () () M-6mm M-8mm M-9mm M-10mm M-11mm M-12mm M-13mm M-14mm M-15mm mm 98

106 3/8" Square rive Sockets, Metric Magnetic, Long and Extra Long Length Part Number Hex Overall iameter iameter Opening Magnetic Opening Length Nose End rive End epth olt learance mm () () () () M-6mm M-7mm M-8mm M-9mm M-10mm M-10mm M-11mm M-12mm M-13mm M-13mm M-14mm M-15mm M-15mm M-16mm M-17mm M-18mm mm Surface rive, Short and Standard Length Part Number Hex Overall iameter iameter Opening Magnetic Opening Length Nose End rive End epth olt learance mm () () () () SF-8mm SF-9mm SF-10mm SF-10mm SF-11mm SF-11mm SF-12mm SF-12mm SF-13mm SF-13mm SF-14mm SF-14mm SF-15mm SF-15mm SF-16mm SF-17mm SF-17mm SF-18mm SF-18mm SF-19mm SF-19mm mm 99

107 3/8" Square rive Sockets, Metric Surface rive, Thin Wall, Standard Length Part Number Hex Overall iameter iameter Opening Surface Opening Length Nose End rive End epth rive mm () () () () SF-10mm SF-11mm SF-12mm SF-13mm SF-15mm SF-16mm SF-17mm SF-18mm SF-19mm Surface rive, Long and Extra Long Length Part Number Hex Overall iameter iameter Opening Surface Opening Length Nose End rive End epth rive mm () () () () SF-10mm SF-10mm SF-11mm SF-12mm SF-13mm SF-13mm SF-15mm SF-15mm SF-17mm SF-18mm SF-19mm /8" Square rive Sockets For Metric Sheet Metal Screws mm mm 6 Point and 6 Point Magnetic, for Predrilled Holes mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic mm () () () () 6mmE3 M-6mmE mmE3 M-7mmE mmE3 M-8mmE mmE3 M-9mmE mmE3 M-10mmE mmE3 M-11mmE mmE3 M-12mmE mmE3 M-13mmE

108 3/8" Square rive Socket Sets, Metric 6 Point PS38M 8 piece, standard length: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm PS312M 12 piece, standard length: 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm PS38LM 8 piece, long length: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm PS312LM 12 piece, long length: 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm Universal Wrenches 3/8" Square rive, Metric 6 Point Part Hex Overall Socket Socket Nose End learance Number Opening Length Length iameter iameter epth 6 Point mm () mm () mm () mm () mm (E) mm E S-36-10m S-37-11m S-37-12m S-37-13m S-37-14m S-38-15m S-38-17m S-38-18m Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 3/8 Square rive Universal Wrench Set, Metric 6 Point PU37M 7 piece, standard length: 10mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm TOOL TIP universal wrench is ideal and often the only solution for hard-to-reach bolt locations. Universal wrenches must not be used with impact drivers. 101

109 3/8" Square rive Universal Wrenches, Metric Extension 6 Point, Standard and Tension Type Tension Type Standard Type Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension mm () mm () mm () mm () mm (E) mm K-6-10m K-6-10m K-6-10m-6 K-6-10m K-6-10m-9 K-6-10m K-6-10m-12 K-6-10m K-7-11m K-7-11m-6 K-7-11m K-7-11m K-7-11m-12 K-7-11m K-7-12m K-7-12m K-7-12m-6 K-7-12m K-7-12m-9 K-7-12m K-7-12m-12 K-7-12m K-7-13m K-7-13m K-7-13m-6 K-7-13m K-7-13m-9 K-7-13m K-7-13m-12 K-7-13m K-7-14m K-7-14m K-7-14m-6 K-7-14m K-7-14m-9 K-7-14m K-7-14m K-8-15m K-8-15m K-8-15m-6 K-8-15m K-8-15m-9 K-8-15m K-8-15m-12 K-8-15m /8" Square rive Socket Head its, Metric omplete, dapter Only, Insert Only Part Number Overall Length dapter Insert Hex Length of Insert () omplete Only Only Size In. mm In. mm SZ-3-7-4mm S-314 SZ-7-4mm 4mm 2 3/ /8 35 SZ-3-7-5mm S-314 SZ-7-5mm 5mm 2 3/ /8 35 SZ-3-7-6mm S-314 SZ-7-6mm 6mm 2 3/ /8 35 SZ-3-7-8mm S-314 SZ-7-8mm 8mm 2 3/ /8 35 SZ mm S-314 SZ-7-10mm 10mm 2 3/ /

110 3/8" Square rive Sockets For Spline Fasteners Standard and Long Length Overall iameter iameter Part Spline Nominal Length () Nose End () rive End () Number Size Size In. mm In. mm In. mm MS / / /32 17 MS /8 2 1/ / /32 17 MS /16 1 1/ / /16 18 MS /16 2 1/8 54 5/ /16 18 MS /2 1 1/ / /32 18 MS /16 1 1/ / /16 21 MS /16 2 3/ / /16 21 MS /8 1 3/ /8 22 7/8 22 MS /8 2 3/8 60 7/8 22 7/8 22 pex spline sockets conform to military specifications MS and MIL-W /8" Square rive Torx Sockets For External Torx Screws Overall Nose End rive End Part river Length () iameter () iameter () Number Size In. mm In. mm In. mm TX-3106 E-6 1 1/4 32 3/8 10 3/4 19 TX-3107 E-7 1 1/4 32 3/8 10 3/4 19 TX-3108 E-8 1 1/4 32 7/ /4 19 TX-3110 E /4 32 1/2 13 3/4 19 TX-3112 E /4 32 5/8 16 3/4 19 TX-3114 E / / /4 19 TX-3116 E / / /16 21 For External Torx Screws, Thin Wall Overall Nose End rive End Part river Length () iameter () iameter () Number Size In. mm In. mm In. mm TX-3406 E-6 1 1/4 32 5/16 8 5/8 16 TX-3407 E-7 1 1/ /32 9 5/8 16 TX-3408 E-8 1 1/4 32 3/8 10 5/8 16 TX-3410 E /4 32 1/2 13 5/8 16 TX-3412 E /4 32 9/ /8 16 TX-3414 E /4 32 5/8 16 3/4 19 TX-3416 E /4 32 3/4 19 3/4 19 Some Torx sockets have a IN (pin and o-ring) groove. 103

111 3/8" Square rive Torx Sockets For Torx Nuts Overall Nose End rive End Part river Length () iameter () iameter () Number Size In. mm In. mm In. mm TX-3E08 E-8 1 1/4 32 5/8 16 5/8 16 TX-3E10 E /4 32 5/8 16 5/8 16 TX-3E12 E / / /16 17 TX-3E14 E /4 32 3/4 19 3/4 19 TX-3E16 E / / /16 21 Sockets for Torx nuts have a larger lead-in chamfer than sockets for external Torx screws. Some Torx sockets have a IN (pin and o-ring) groove. 3/8" Square rive Extensions 1 1/4" to 18" (32mm to 457mm) Length Part Male Square Type of Overall Length Number In. Lock In. mm EX-374 3/8 Pin 1 1/4 32 EX-374-3/8 all 1 1/4 32 EX /8 Pin 2 51 EX /8 all 2 51 EX /8 Pin 3 76 EX /8 all 3 76 EX /8 Pin EX /8 all EX /8 Pin EX /8 all EX /8 Pin EX /8 all EX /8 Pin EX /8 all EX /8 Pin EX /8 all EX /8 Pin EX /8 all EX /8 Pin EX /8 all EX /8 Pin EX /8 all EX /8 Pin

112 3/8" Square rive dapters 1/4" to 3/4" Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX-254 1/4 3/8 Pin 1 1/4 32 EX-254-1/4 3/8 all 1 1/4 32 EX /4 3/8 Pin 2 51 EX /4 3/8 all 2 51 EX /4 3/8 Pin 3 76 EX /4 3/8 all 3 76 EX /4 3/8 Pin EX /4 3/8 all EX /4 3/8 Pin EX /4 3/8 all EX /4 3/8 Pin EX /4 3/8 all EX-503 1/2 3/8 Pin 1 1/2 38 EX-503-1/2 3/8 all 1 1/2 38 EX /2 3/8 Pin 2 51 EX /2 3/8 Pin 3 76 EX /2 3/8 all 3 76 EX /2 3/8 Pin EX /2 3/8 all EX /2 3/8 Pin EX /2 3/8 all EX-622 5/8 3/8 Pin 1 1/2 38 EX-750 3/4 3/8 7/32 rill Hole 1 1/2 38 EX-750-3/4 3/8 all 1 1/2 38 3/8" Square rive Universal dapters Male Square to Female Square Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 3/8" Square rive Universal dapters Extension Male Square to Female Square (Standard Type Shown) Standard lengths are 3", 6", 9" and 12" (76, 152, 229 and 305mm) Part Male Female Type of Overall Length Largest iameter Number Square In. Square In. Lock In. mm In. mm MF-27 1/4 3/8 Pin 1 5/ /4 19 MF-27 1/4 3/8 all 1 5/ /4 19 MF-37 3/8 3/8 Pin 2 1/8 54 3/4 19 MF-37 3/8 3/8 all 2 1/8 54 3/4 19 MF-38 3/8 3/8 Pin 2 1/2 64 7/8 22 MF-38 3/8 3/8 all 2 1/2 64 7/8 22 Part Number Male Female Type of Largest iameter Standard Tension Square In. Square In. Lock In. mm KM-25-3 KM /4 3/8 Pin 5/8 16 KM-37-3 KM /8 3/8 Pin 3/4 19 KM KM /8 3/8 all 3/4 19 KM-38-6 KM /8 3/8 Pin 7/

113 1/2" Square rive Sockets, SE 6 Point and 12 Point, Standard Length inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /4 1 1/2 7/16 15/16 5/ /32 1 1/2 7/16 15/16 3/ /16 1 1/2 1/2 15/16 3/ /32 1 1/2 9/16 15/16 3/ /8 1 1/2 5/8 15/16 1/ /32 1 1/2 11/16 15/16 1/ /16 1 1/2 11/16 15/16 9/ /32 1 1/2 3/4 15/16 9/ /2 1 1/2 13/16 15/16 11/32 SH-335 SH-335-1/2 1 1/2 45/64 15/16 11/ /32 1 1/2 7/8 15/16 11/ /16 1 1/2 7/8 15/16 7/16 SH-336 SH-336-9/16 1 1/2 27/32 15/16 7/ /32 1 1/2 15/16 15/16 7/ /8 1 1/ /16 SH-338 SH-338-5/8 1 1/2 15/16 1 7/ /32 1 1/ / /16 1 1/2 1 1/8 1 1/8 7/16 SH-339 SH /16 1 1/2 1 1/64 1 1/16 7/16 SW-282 SW-282-3/4 1 1/2 1 1/4 1 1/4 15/ /4 1 1/2 1 1/8 1 1/8 15/ /32 1 1/2 1 1/4 1 1/4 15/ /16 1 1/2 1 1/4 1 1/4 17/ /8 1 1/2 1 5/16 1 5/16 9/ /32 1 1/2 1 3/8 1 3/8 5/ /16 1 1/2 1 3/8 1 3/8 5/ /32 1 1/2 1 1/2 1 1/2 5/ /2 1 1/2 1 1/2 5/ /16 1 5/8 1 1/2 1 1/2 11/ /8 1 5/8 1 5/8 1 5/8 3/ /16 1 5/8 1 3/4 1 3/4 3/ /4 1 3/4 1 3/4 1 3/4 13/ /16 1 3/4 1 7/8 1 7/8 13/ /8 1 7/ / / / / /8 2 1/ / /4 2 1/ / /8 2 3/8 1 1/ / /8 2 3/8 1 1/ / /2 2 1/2 1 1/8 106

114 1/2" Square rive Sockets, SE 6 Point and 12 Point, Thin Wall, Standard Length inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /16 1 1/2 19/32 15/16 1/ /8 1 1/2 19/32 15/16 1/ /16 1 1/2 21/32 15/16 9/ /2 1 1/2 23/32 15/16 11/ /16 1 1/2 13/16 15/16 7/ /8 1 1/2 7/8 15/16 7/ /32 1 1/2 29/32 15/16 7/16 HE-2422 HE /16 1 1/ /16 *5422 * /16 1 1/2 15/16 15/16 7/ /4 1 1/2 1 1/32 1 1/8 15/ /32 1 1/2 1 1/16 1 1/8 15/ /16 1 1/2 1 1/8 1 1/8 17/32 HE-1028 HE /8 1 1/2 1 1/4 1 1/4 9/16 *5428 *5428-7/8 1 1/2 1 3/16 1 1/4 9/16 HE-530 HE /16 1 1/2 1 5/16 1 5/16 5/8 *5430 * /16 1 1/2 1 1/4 1 1/4 5/ /2 1 3/8 1 3/8 5/ /16 1 5/8 1 7/16 1 7/16 11/ /8 1 5/8 1 1/2 1 1/2 3/ /16 1 5/8 1 5/8 1 5/8 3/ /4 1 3/4 1 11/16 1 3/4 13/ /16 1 3/4 1 25/32 1 7/8 13/16 *Extra thin wall TOOL TIP Thin wall sockets accommodate countersunk or limited clearance nut or bolt locations. Many of these sockets have a shouldered body design that can fit in tight quarters. 107

115 1/2" Square rive Sockets, SE 6 Point and 12 Point, Long and Extra Long Length inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /16 2 1/4 1/2 15/16 3/ /16 3 1/4 1/2 15/16 3/ /8 2 1/4 5/8 15/16 1/ /8 3 1/4 5/8 15/16 1/ /16 2 1/4 11/16 15/16 9/ /16 3 1/4 11/16 15/16 9/ /2 2 1/4 13/16 15/16 11/ /2 3 1/4 13/16 15/16 11/32 HE-9518 HE /16 2 1/4 7/8 7/8 7/ /16 2 1/4 7/8 15/16 7/ /16 3 1/4 7/8 15/16 7/ /8 2 1/ / /8 3 1/ / /16 2 1/4 1 1/8 1 1/8 7/ /16 3 1/4 1 1/8 1 1/8 7/ /4 2 1/4 1 1/8 1 1/8 15/ /4 3 1/4 1 1/8 1 1/8 15/32 SW-493 SW-493-3/4 2 1/4 1 1/4 1 1/4 15/ /16 2 1/4 1 1/4 1 1/4 17/ /16 3 1/2 1 1/4 1 1/4 17/ /8 2 1/4 1 5/16 1 5/16 9/ /8 3 1/2 1 5/16 1 5/16 9/ /16 2 1/4 1 3/8 1 3/8 5/ /16 3 1/2 1 3/8 1 3/8 5/ /4 1 1/2 1 1/2 5/ /2 1 1/2 1 1/2 5/ /16 2 3/8 1 1/2 1 1/2 11/ /16 3 1/2 1 1/2 1 1/2 11/ /8 2 3/8 1 5/8 1 5/8 3/ /8 3 1/2 1 5/8 1 5/8 3/ /16 2 3/8 1 3/4 1 3/4 3/ /16 3 1/2 1 3/4 1 3/4 3/ /4 2 1/2 1 3/4 1 3/4 13/ /4 3 1/2 1 3/4 1 3/4 13/ /16 2 1/2 1 7/8 1 7/8 13/ /16 3 1/2 1 7/8 1 7/8 13/ /8 2 1/ / /8 3 5/ / /16 2 1/ / /16 3 5/ / /2 2 1/2 2 1/8 2 1/ /2 3 3/4 2 1/8 2 1/

116 1/2" Square rive Sockets, SE 6 Point and 12 Point, Thin Wall, Extra Long Length inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /16 3 1/4 1/2 15/16 3/ /8 3 1/4 19/32 15/16 1/ /16 3 1/4 21/32 15/16 9/ /2 3 1/4 23/32 15/16 11/ /16 3 1/4 13/16 15/16 7/ /8 3 1/4 7/8 15/16 7/ /16 3 1/4 15/16 15/16 7/ /4 3 1/4 1 1/32 1 1/8 15/ /16 3 1/2 1 1/8 1 1/8 17/ /8 3 1/2 1 3/16 1 1/4 9/ /16 3 1/2 1 1/4 1 1/4 5/ /2 1 3/8 1 3/8 5/ /16 3 1/2 1 7/ /16 11/16 Magnetic, Standard Length inches Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet In. () () () () M /4 1 1/2 7/16 15/16 5/32 M /16 1 1/2 1/2 15/16 3/16 M /8 1 1/2 5/8 15/16 1/4 M /16 1 1/2 11/16 15/16 9/32 M /2 1 1/2 13/16 15/16 11/32 MSH-335 1/2 1 1/2 45/64 15/16 11/32 M /16 1 1/2 7/8 15/16 7/16 MSH-336 9/16 1 1/2 27/32 15/16 7/16 M /8 1 1/ /16 M /16 1 1/2 1 1/8 1 1/8 7/16 M /4 1 1/2 1 1/8 1 1/8 15/32 M /16 1 1/2 1 1/4 1 1/4 17/32 Magnetic, Thin Wall, Standard Length inches Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet In. () () () () M /8 1 1/2 19/32 15/16 1/4 M /16 1 1/2 21/32 15/16 9/32 M /2 1 1/2 23/32 15/16 11/32 M /16 1 1/2 13/16 15/16 7/16 M /8 1 1/2 7/8 15/16 7/16 109

117 1/2" Square rive Sockets, SE 110 Magnetic, Long Length and Extra Long Length inches *Thin Wall Part Part Hex Overall iameter iameter Opening Number Magnetic olt Opening Length Nose End rive End epth 6 Point learance In. () () () () - M /16 2 1/4 5/8 15/16 1/4 - M /8 2 1/4 5/8 15/16 1/4 M-5512* - 3/8 3 1/4 19/32 15/16 1/4 - M /16 2 1/4 11/16 15/16 9/32 M-5216 M /2 2 1/4 13/16 15/16 11/32 M /2 3 1/4 13/16 15/16 11/32 M /16 2 1/4 7/8 15/16 7/16 - M-HE9518 9/16 2 1/4 7/8 15/16 7/16 M /16 3 1/4 7/8 15/16 7/16 M-5518* - 9/16 3 1/4 13/16 15/16 7/16 M-5220 M /8 2 1/ /16 Surface rive and Fast Lead, Standard Length inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Fast Lead In. () () () () SF-5112 FL /8 1 1/2 5/8 15/16 1/4 SF-5114 FL /16 1 1/2 11/16 15/16 9/32 SF-5116 FL /2 1 1/2 13/16 15/16 11/32 SF-SH-335 FL-SH-335 1/2 1 1/2 45/64 15/16 11/32 SF-5118 FL /16 1 1/2 7/8 15/16 7/16 SF-SH-336 FL-SH-336 9/16 1 1/2 27/32 15/16 7/16 SF-5120 FL /8 1 1/ /16 - FL-SH-338 5/8 1 1/2 15/16 1 7/16 SF-5122 FL /16 1 1/2 1 1/8 1 1/8 7/16 SF-5124 FL /4 1 1/2 1 1/8 1 1/8 15/32 SF-SW-282 FL-SW-282 3/4 1 1/2 1 1/4 1 1/4 15/32 SF-5126 FL /16 1 1/2 1 1/4 1 1/4 17/32 SF-5128 FL /8 1 1/2 1 5/16 1 5/16 9/16 SF-5130 FL /16 1 1/2 1 3/8 1 3/8 5/8 SF-5132 FL /2 1 1/2 1 1/2 5/8 SF-5134 FL /16 1 5/8 1 1/2 1 1/2 11/16 Surface rive and Fast Lead, Thin Wall, Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Fast Lead In. () () () () SF /8 1 1/2 19/32 15/16 1/4 SF-5414 FL /16 1 1/2 21/32 15/16 9/32 SF-5416 FL /2 1 1/2 23/32 15/16 11/32 SF-5418 FL /16 1 1/2 13/16 15/16 7/16 SF /8 1 1/2 7/8 15/16 7/16 SF /16 1 1/2 15/16 15/16 7/16 SF /4 1 1/2 1 1/32 1 1/8 15/32 SF /16 1 1/2 1 1/8 1 1/8 17/32

118 1/2" Square rive Sockets, SE Surface rive and Fast Lead, Long and Extra Long Length inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Fast Lead In. () () () () SF /8 2 1/4 9/16 15/16 9/32 SF-5214 FL /16 2 1/4 11/16 15/16 9/32 SF /16 3 1/4 11/16 15/16 9/32 SF-5216 FL /2 2 1/4 13/16 15/16 11/32 SF-5316 FL /2 3 1/4 13/16 15/16 11/32 SF-HE9518 FL- HE9518 9/16 2 1/4 7/8 7/8 7/16 SF-5218 FL /16 2 1/4 7/8 15/16 7/16 SF-5318 FL /16 3 1/4 7/8 15/16 7/16 SF-5220 FL /8 2 1/ /16 SF-5320 FL /8 3 1/ /16 SF-5222 FL /16 2 1/4 1 1/8 1 1/8 7/16 SF-5322 FL /16 3 1/4 1 1/8 1 1/8 7/16 SF-5224 FL /4 2 1/4 1 1/8 1 1/8 15/32 - FL-SW-493 3/4 2 1/4 1 1/4 1 1/4 15/32 SF-5324 FL /4 3 1/4 1 1/8 1 1/8 15/32 SF-5226 FL /16 2 1/4 1 1/4 1 1/4 17/32 SF-5326 FL /16 3 1/2 1 1/4 1 1/4 17/32 SF-5228 FL /8 2 1/4 1 5/16 1 5/16 9/16 SF /8 3 1/2 1 5/16 1 5/16 9/16 SF /16 2 1/4 1 3/8 1 3/8 5/8 SF /16 3 1/2 1 3/8 1 3/8 5/8 SF /4 1 1/2 1 1/2 5/8 SF /2 1 1/2 1 1/2 5/8 SF /16 3 1/2 1 1/2 1 1/2 11/16 Surface rive, Thin Wall, Extra Long Length inches Part Number Hex Overall iameter iameter Opening Surface Opening Length Nose End rive End epth rive In. () () () () SF /16 3 1/4 21/32 15/16 9/32 SF /2 3 1/4 23/32 15/16 11/32 SF /16 3 1/4 13/16 15/16 7/16 SF /8 3 1/4 7/8 15/16 7/16 SF /16 3 1/4 15/16 15/16 7/16 SF /4 3 1/4 1 1/32 1 1/8 15/32 SF /16 3 1/4 1 1/8 1 1/8 17/32 SF /8 3 1/2 1 3/16 1 1/4 9/16 SF /2 1 3/8 1 3/8 5/8 SF /16 3 1/2 1 7/16 1 7/16 11/16 111

119 1/2" Square rive Sockets For SE Sheet Metal Screws 1/2" Square rive Sockets For SE Square Nuts Point and 6 Point Magnetic, for Predrilled Holes* inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic In. () () () () 5E08 M5E08 1/4 1 1/2 7/16 15/16 5/32 5E10 M5E10 5/16 1 1/2 1/2 15/16 3/16 5E12 M5E12 3/8 1 1/2 5/8 15/16 1/4 5E14 M5E14 7/16 1 1/2 11/16 15/16 9/32 5E16 M5E16 1/2 1 1/2 13/16 15/16 11/32 5E18 M5E18 9/16 1 1/2 15/16 15/16 7/16 6 Point and 6 Point Magnetic, for Self-Tapping Screws* inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic In. () () () () 5P08 M5P08 1/4 1 1/2 7/16 15/16 5/32 5P10 M5P10 5/16 1 1/2 1/2 15/16 3/16 5P12 M5P12 3/8 1 1/2 5/8 15/16 1/4 5P14 M5P14 7/16 1 1/2 11/16 15/16 9/32 5P16 M5P16 1/2 1 1/2 13/16 15/16 11/32 5P18 M5P18 9/16 1 1/2 15/16 15/16 7/16 * Sockets for predrilled holes are intermediate hardness; sockets for self-tapping screws are maximum hardness. Single Square and ouble Square, Standard Length inches Part Part Square Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Square In. () () () () /4 1 1/2 1/2 15/16 3/ /32 1 1/2 1/2 15/16 3/ /16 1 1/2 5/8 15/16 1/ /8 1 1/2 3/4 15/16 1/ /16 1 1/2 7/8 15/16 9/ /2 1 1/ / /16 1 1/2 1 1/8 1 1/8 7/ /32 1 1/2 1 1/8 1 1/8 7/ /8 1 1/2 1 1/4 1 1/4 7/ /16 1 1/2 1 1/4 1 1/4 7/ /4 1 1/2 1 3/8 1 3/8 15/ /16 1 1/2 1 1/2 1 1/2 17/ /8 1 1/2 1 5/8 1 5/8 5/ /8 1 3/4 1 3/4 5/ /16 1 3/4 1 7/8 1 7/8 11/ /8 1 3/ /4

120 1/2" Square rive Sockets For SE Square Nuts Single Square and ouble Square, Thin Wall, Standard Length Part Part Square Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth Square ouble Square In. () () () () /16 1 1/2 19/32 15/16 1/ /8 1 1/2 11/16 15/16 1/ /16 1 1/2 25/32 15/16 9/ /2 1 1/2 15/16 15/16 11/ /16 1 1/ / /8 1 1/2 1 3 /32 1 1/8 7/16 inches Single Square and ouble Square, Long and Extra Long Length inches Part Part Square Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth Square ouble Square In. () () () () /8 2 1/4 3/4 15/16 1/ /8 3 1/4 3/4 15/16 1/ /16 2 1/4 7/8 15/16 9/ /16 3 1/4 7/8 15/16 9/ /2 2 1/ / /2 3 1/ / /16 2 1/4 1 1/8 1 1/8 7/ /16 3 1/4 1 1/8 1 1/8 7/ /8 2 1/4 1 1/4 1 1/4 7/ /8 3 1/2 1 1/4 1 1/4 7/ /16 3 1/2 1 1/4 1 1/4 7/ /4 2 1/4 1 3/8 1 3/8 15/ /16 3 1/2 1 1/2 1 1/2 17/ /8 2 1/4 1 5/8 1 5/8 5/ /8 3 1/2 1 5/8 1 5/8 5/ /4 1 3/4 1 3/4 5/ /16 3 1/2 1 5/8 1 5/8 5/ /2 1 3/4 1 3/4 5/ /16 3 1/2 1 7/8 1 7/8 11/ /8 3 1/ /4 1/2" Square rive Socket Sets, SE 6 Point PS58 8 piece, standard length: 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 PS piece, standard length: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 PS58XL 8 piece, extra long length: 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 113

121 Universal Wrenches 1/2" Square rive, SE 6 Point and 12 Point E Part Part Hex Overall Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth 6 Point 12 Point In. () In. () In. () In. () In. (E) In. S-216 S-216-3/8 2 11/64 7/8 7/8 9/16 11/32 S-217 S-217-7/ /64 15/16 7/8 5/8 13/32 S-316-7/ /64 15/16 1 5/8 3/8 S-218 S-218-1/2 2 19/64 1 7/8 11/16 15/32 S-317-1/2 2 31/ /16 7/16 S-219 S-219-9/ /64 1 1/16 7/8 3/4 17/32 S-318 S-318-9/ /64 1 1/8 1 3/4 9/16 S-221 S-221-5/8 2 27/64 1 1/8 7/8 7/8 19/32 S-320 S-320-5/8 2 33/64 1 3/ /32 5/8 S-402 S-402-5/8 2 49/64 1 1/4 1 1/4 7/8 33/64 S-321 S / /64 1 1/ /16 S-322 S-322-3/4 2 37/64 1 1/4 1 1/8 1 1/8 11/16 S-404 S-404-3/4 2 57/64 1 3/8 1 1/4 1 1/32 5/8 S-501-3/4 3 1/32 1 5/8 1 1/2 1 1/8 25/32 S / /64 1 3/8 1 1/4 1 1/8 41/64 S-407-7/8 2 57/64 1 3/8 1 3/16 1 5/16 41/64 S-409 S / /64 1 3/8 1 5/16 1 5/16 41/64 S /16 3 5/32 1 3/4 1 1/2 1 3/8 29/32 S /64 1 7/16 1 1/2 1 1/2 45/64 S /16 3 1/64 1 1/2 1 1/2 1 1/2 49/64 S /8 3 9/32 1 7/8 1 5/8 1 5/8 1 1/32 S /4 3 13/ /4 1 3/4 1 5/32 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 1/2 Square rive Universal Wrench Set, SE 6 Point PU56 6 piece, standard length: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 TOOL TIP Quality design and construction give pex universal wrenches a long service life and durability that stands up to torque. Remember, universal wrenches, extensions and adapters are not to be used with impact drivers. 114

122 Universal Wrenches 1/2" Square rive, SE Extension 6 Point, Standard and Tension Type Tension Type Standard Type Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E Part Part Hex Shank Socket Socket Nose End Opening Number Number Opening Length Length iameter iameter epth Standard Tension In. () In. () In. () In. () In. (E) In. KH /8 3 13/16 5/8 17/32 7/16 KH-43-6 KN /8 6 13/16 5/8 17/32 7/16 KH-43-9 KN /8 9 13/16 5/8 17/32 7/16 KH /16 3 7/8 5/8 5/8 1/2 KH-44-4 KN /16 4 7/8 5/8 5/8 1/2 KH-44-6 KN /16 6 7/8 5/8 5/8 1/2 KH /16 9 7/8 5/8 5/8 1/2 - KN / /8 5/8 5/8 1/2 KH /2 3 7/8 11/16 11/16 1/2 KH /2 4 7/8 11/16 11/16 1/2 KH-45-6 KN /2 6 7/8 11/16 11/16 1/2 - KN /2 9 7/8 11/16 11/16 1/2 KH / /4 3/4 9/16 KH / /4 3/4 9/16 KH KN / /4 3/4 9/16 KH KN / /4 3/4 9/16 KH KN / /4 3/4 9/16 KH / /8 11/16 15/32 KH KN / /8 11/16 15/32 - KN / /8 11/16 15/32 KH KN / /8 11/16 15/32 KH / /16 13/16 9/16 KH / /16 13/16 9/16 KH KN / /16 13/16 9/16 - KN / /16 13/16 9/16 KH KN / /16 13/16 9/16 KH / /16 7/8 3/4 17/32 KH / /16 7/8 3/4 17/32 KH KN / /16 7/8 3/4 17/32 KH KN / /16 7/8 3/4 17/32 KH KN / /16 7/8 3/4 17/32 KH KN / /8 1 3/4 9/16 KH KN / /8 1 3/4 9/16 KH KN / /8 1 3/4 9/16 KH / /8 1 3/4 9/16 KH / /8 7/8 7/8 19/32 KH / /8 7/8 7/8 19/32 KH KN / /8 7/8 7/8 19/32 KH KN / /8 7/8 7/8 19/32 KH KN / /8 7/8 7/8 19/32 KH / / /32 5/8 115

123 Universal Wrenches 1/2" Square rive, SE Extension 6 Point, Standard and Tension Type (continued) Tension Type Standard Type Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension In. () In. () In. () In. () In. (E) In. KH KN / / /32 5/8 KH KN / / /32 5/8 KH KN / / /32 5/8 KH / / /16 KH / / /16 KH KN / / /16 KH KN / / /16 KH / / /16 KH / /4 1 1/8 1 1/8 11/16 KH / /4 1 1/8 1 1/8 11/16 KH KN / /4 1 1/8 1 1/8 11/16 KH KN / /4 1 1/8 1 1/8 11/16 KH KN / /4 1 1/8 1 1/8 11/16 KH / /8 1 1/4 1 1/32 41/64 KH / /8 1 1/4 1 1/32 41/64 KH KN / /8 1 1/4 1 1/32 41/64 KH KN / /8 1 1/4 1 1/32 41/64 KH KN / /8 1 1/4 1 1/32 41/64 KH / /8 1 5/16 1 5/16 41/64 KH / /8 1 5/16 1 5/16 41/64 KH / /8 1 5/16 1 5/16 41/64 KH / /8 1 5/16 1 5/16 41/64 KH / /8 1 5/16 1 5/16 41/64 1/2" Square rive Socket Head its, SE omplete, dapter Only, Insert Only Part Number Overall Length dapter Insert Hex Length of Insert () omplete Only Only Size In. mm In. mm SZ-22 S-514 SZ-14-1/4 2 1/ /8 35 SZ-23 S-514 SZ-15-5/16 2 1/ /8 35 SZ-24 S-514 SZ-16-3/8 2 1/ /8 35 SZ-25 S-514 SZ-17-1/2 2 1/ /8 35 SZ-42 S-520 SZ-31-1/2 2 1/ /16 35 SZ-43 S-514 SZ-18-9/16 2 1/ /8 35 SZ-44 RP-520 SZ-32-9/16 2 1/ /16 35 SZ-26 S-514 SZ-19-5/8 2 1/ /8 35 For a complete listing, see page 36. dapters with an S prefix feature a set screw for locking in the bit. n RP prefix indicates adapters with a roll pin that is inserted through the bit. 116

124 1/2" Square rive Sockets, Metric 6 Point and 12 Point, Standard Length mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point mm. () () () () 10mm15 10mm mm15 11mm mm15 12mm mm15 13mm mm15 14mm mm15 15mm mm15 16mm mm15 17mm mm15 18mm mm15 19mm mm15 20mm mm15 21mm mm15 22mm mm15 23mm mm15 24mm mm15 25mm mm15 26mm mm15 27mm mm15 28mm mm15 29mm mm15 30mm mm15 32mm mm mm mm mm Point and 12 Point, Thin Wall, Standard Length mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point mm () () () () 10mm45 10mm mm45 11mm mm45 12mm mm45 13mm mm45 14mm mm45 15mm mm45 16mm mm45 17mm mm45 18mm mm45 19mm mm mm45 21mm mm45 22mm

125 1/2" Square rive Sockets, Metric 6 Point and 12 Point, Long Length mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point mm () () () () 10mm25 10mm mm25 11mm mm25 12mm mm25 13mm mm mm25 15mm mm25 16mm mm25 17mm mm25 18mm mm25 19mm mm25 20mm mm25 21mm mm25 22mm mm25 23mm mm25 24mm mm mm mm mm mm25 29mm mm25 30mm mm Point and 12 Point, Extra Long Length mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point mm () () () () 10mm35 10mm mm35 11mm mm35 12mm mm35 13mm mm35 14mm mm35 15mm mm35 16mm mm35 17mm mm35 18mm mm35 19mm mm35 20mm mm35 21mm mm35 22mm mm mm35 24mm mm

126 1/2" Square rive Sockets, Metric 6 Point and 12 Point, Thin Wall, Extra Long Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point mm () () () () 10mm55 10mm mm mm55 12mm mm55 13mm mm55 14mm mm55 15mm mm55 16mm mm55 17mm mm55 18mm mm55 19mm mm mm55 21mm mm55 22mm mm mm55 24mm mm mm55 27mm mm mm mm mm mm Magnetic, Standard Length Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet mm () () () () M-10mm M-11mm M-12mm M-13mm M-14mm M-15mm M-16mm M-17mm M-18mm M-19mm M-21mm mm 119

127 1/2" Square rive Sockets, Metric Magnetic, Thin Wall, Standard Length Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet mm () () () () M-10mm M-11mm M-12mm M-13mm M-14mm M-15mm M-16mm mm Magnetic, Long Length Part Part Hex Overall iameter iameter Opening Fixed Magnetic olt Opening Length Nose End rive End epth Magnet learance mm () () () () - M-10mm M-11mm M-12mm M-13mm25 M-13mm M-14mm M-15mm25 M-15mm M-16mm M-18mm25 M-18mm mm Magnetic, Extra Long Length mm Part Part Hex Overall iameter iameter Opening Fixed Magnetic olt Opening Length Nose End rive End epth Magnet learance mm () () () () M-12mm M-13mm M-13mm55* M-15mm35 M-15mm M-18mm35 M-18mm M-18mm55* * Thin Wall TOOL TIP In addition to a fixed magnet socket (center), pex offers spring-loaded (left) and cylindrical (right) magnet styles that allow the bolt to recess into the socket body as the nut is driven down. Fixed magnet sockets are designated by a M- part number prefix, spring-loaded by M- prefix and cylindrical by a SM- prefix. 120

128 1/2" Square rive Sockets, Metric Surface rive, Standard Length Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth Surface rive mm () () () () SF-10mm SF-11mm SF-12mm SF-13mm SF-14mm SF-15mm SF-16mm SF-17mm SF-18mm SF-19mm SF-20mm SF-21mm SF-22mm SF-23mm SF-24mm mm Surface rive, Thin Wall, Standard Length Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth Surface rive mm () () () () SF-10mm SF-11mm SF-12mm SF-13mm SF-14mm SF-15mm SF-16mm SF-17mm SF-18mm SF-19mm SF-20mm SF-21mm SF-22mm mm 121

129 1/2" Square rive Sockets, Metric Surface rive, Long Length mm Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth Surface rive mm () () () () SF-10mm SF-11mm SF-12mm SF-13mm SF-14mm SF-15mm SF-16mm SF-17mm SF-18mm SF-19mm SF-21mm SF-22mm SF-23mm SF-24mm Surface rive, Extra Long Length mm Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth Surface rive mm () () () () SF-10mm SF-12mm SF-13mm SF-14mm SF-15mm SF-16mm SF-17mm SF-18mm SF-19mm SF-21mm SF-22mm SF-23mm SF-24mm

130 1/2" Square rive Sockets, Metric Surface rive, Thin Wall, Extra Long Length mm Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth Surface rive mm () () () () SF-10mm SF-11mm SF-12mm SF-13mm SF-14mm SF-15mm SF-16mm SF-17mm SF-18mm SF-19mm SF-21mm SF-22mm SF-24mm /2" Square rive Sockets For Metric Sheet Metal Screws 6 Point and 6 Point Magnetic, For Regular Screws Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic mm. () () () () 13mmE5 M-13mmE mmE5 M-15mmE mm 1/2" Square rive Socket Sets, Metric 6 Point PS58M 8 piece, standard length: 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm PS511M 11 piece, standard length: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm PS58XLM 8 piece, extra long length: 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm 123

131 1/2" Square rive Universal Wrenches, Metric 6 Point Part Hex Overall Socket Socket Nose End learance Number Opening Length Length iameter iameter epth 6 Point mm () mm () mm () mm () mm (E) mm S-57-13m S-57-14m S-58-15m S-58-16m S-58-17m S-58-18m S m S m S m S m S m S m E 1/2 Square rive Universal Wrench Set, Metric 6 Point PU56M 6 piece, standard length: 13mm, 14mm, 15mm, 16mm, 17mm, 18mm 1/2" Square rive Universal Wrenches, Metric Extension 6 Point, Standard and Tension Type Tension Type Standard Type E Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension mm () mm () mm () mm () mm (E) mm KH-7-12m KH-7-12m KH-7-12m-6 KN-7-12m KH-7-12m-9 KN-7-12m KH-7-12m KH-7-13m KH-7-13m KH-7-13m-6 KN-7-13m Universal wrenches must not be used with impact drivers. Maximum operating angle is

132 1/2" Square rive Universal Wrenches, Metric Extension 6 Point, Standard and Tension Type (continued) Tension Type Standard Type Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension mm () mm () mm () mm () mm (E) mm KH-7-13m-9 KN-7-13m KH-7-13m-12 KN-7-13m KH-7-14m KH-7-14m-6 KN-7-14m KN-7-14m KH-7-14m KH-8-15m KH-8-15m KH-8-15m-6 KN-8-15m KH-8-15m-9 KN-8-15m KH-8-15m-12 KN-8-15m KH-8-16m KH-8-16m KH-8-16m-6 KN-8-16m KH-8-16m-9 KN-8-16m KH-8-16m-12 KN-8-16m KH-8-17m KH-8-17m KH-8-17m-6 KN-8-17m KH-8-17m-9 KN-8-17m KH-8-18m KH-8-18m KH-8-18m-6 KN-8-18m KH-8-18m-9 KN-8-18m KN-8-18m KH-10-19m KH-10-19m KH-10-19m KH-10-19m KH-10-19m /2" Square rive Socket Head its, Metric omplete, dapter Only, Insert Only Part Number Overall Length dapter Insert Hex Length of Insert () omplete Only Only Size In. mm In. mm SZ-5-7-8mm S-514 SZ-7-8mm 8mm 2 1/ /8 35 SZ mm S-514 SZ-7-10mm 10mm 2 1/ /8 35 SZ mm S-514 SZ-7-12mm 12mm 2 1/ /8 35 SZ mm S-514 SZ-7-14mm 14mm 2 1/ /8 35 SZ mm RP-520 SZ-10-14mm 14mm 2 1/ /16 40 SZ mm RP-520 SZ-10-17mm 17mm 2 1/ /16 40 For a complete listing, see page

133 1/2" Square rive Sockets For Spline Fasteners Standard and Long Length Overall iameter iameter Part Spline Nominal Length () Nose End () rive End () Number Size Size In. mm In. mm In. mm MS /2 1 1/ / /8 22 MS /16 1 1/ / /8 22 MS /8 1 1/2 38 7/8 22 7/8 22 MS /16 1 1/ / /32 25 MS /4 1 1/ / /32 26 MS /16 1 1/ / /8 29 MS /16 3 1/ / /8 29 MS /8 1 1/ / /16 30 MS /16 1 1/ / /4 32 MS /16 3 1/ / /4 32 pex spline sockets conform to military specifications MS and MIL-W /2" Square rive Torx Sockets For External Torx Screws Overall iameter iameter Part river Length () Nose End () rive End () Number Size In. mm In. mm In. mm TX-5110 E /2 38 9/ TX-5112 E /2 38 5/ TX-5114 E / / TX-5116 E / / TX-5118 E /2 38 7/ TX-5120 E / /16 30 TX-5124 E / / /16 33 For External Torx Screws, Thin Wall Overall iameter iameter Part river Length () Nose End () rive End () Number Size In. mm In. mm In. mm TX-5408 E-8 1 1/2 38 3/8 10 7/8 22 TX-5410 E /2 38 1/2 13 7/8 22 TX-5412 E /2 38 9/ /8 22 TX-5414 E /2 38 5/8 16 7/8 22 TX-5416 E /2 38 7/8 22 7/8 22 TX-5418 E / / /16 24 TX-5420 E / / /

134 1/2" Square rive Extensions 1 23/32" to 18" (44mm to 457mm) Length Part Male Square Type of Overall Length Number In. Lock In. mm EX-504 1/2 Pin 1 23/32 44 EX-504-1/2 all 1 23/32 44 EX /2 Pin 2 51 EX /2 all 2 51 EX /2 Pin 3 76 EX /2 all 3 76 EX /2 Pin EX /2 all EX /2 Pin EX /2 all EX /2 Pin EX /2 all EX /2 Pin EX /2 all EX /2 Pin EX /2 all EX /2 Pin EX /2 all EX /2 Pin EX /2 all EX /2 Pin EX /2 all EX /2 Pin EX /2 Pin /2" Square rive dapters 1/4" to 3/8" Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX-260 1/4 1/2 Pin 1 1/2 38 EX-260-1/4 1/2 all 1 1/2 38 EX /4 1/2 Pin 2 51 EX /4 1/2 all 2 51 EX /4 1/2 Pin EX /4 1/2 Pin EX-375 3/8 1/2 Pin 1 1/2 38 EX-375-3/8 1/2 all 1 1/2 38 EX /8 1/2 Pin 2 51 EX /8 1/2 all 2 51 EX /8 1/2 Pin 3 76 EX /8 1/2 all 3 76 EX /8 1/2 Pin EX /8 1/2 all

135 5/8" Square rive Sockets, SE 6 Point and 12 Point, Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /2 1 7/8 13/16 1 1/4 11/ /16 1 7/8 7/8 1 1/4 7/ /8 1 7/ /4 7/ /16 1 7/8 1 1/8 1 1/4 7/ /4 1 7/8 1 1/4 1 1/4 15/ /16 1 7/8 1 1/4 1 1/4 17/ /8 1 7/8 1 3/8 1 3/8 9/ / /2 1 1/2 5/ /8 1 5/8 5/ / /8 1 5/8 11/ / /8 1 5/8 3/ / /4 1 3/4 3/ / /8 1 7/8 13/ / / /8 2 1/ / /16 2 1/8 2 1/8 2 1/8 15/ /2 2 1/4 2 1/8 2 1/8 1 inches 6 Point and 12 Point, Thin Wall Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /16 1 7/8 11/16 1 1/4 9/ /16 1 7/8 7/8 1 1/4 7/ /8 1 7/8 15/16 1 1/4 7/ /4 1 7/8 1 1/16 1 1/4 15/ /16 1 7/8 1 1/8 1 1/4 17/ /8 1 7/8 1 3/16 1 1/4 9/ / /16 1 5/16 5/ /8 1 3/8 5/ / /2 1 1/2 11/ / /2 1 1/2 3/ / /4 1 3/4 13/ /8 2 1/8 1 7/8 1 7/8 13/16 inches 129

136 5/8" Square rive Sockets, SE 6 Point and 12 Point, Extra Long Length inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /8 3 1/ /4 7/ /16 3 1/2 1 1/8 1 1/4 7/ /4 3 1/2 1 1/4 1 1/4 15/ /16 3 1/2 1 1/4 1 1/4 17/ /8 3 1/2 1 3/8 1 3/8 9/ /16 3 1/2 1 1/2 1 1/2 5/ /2 1 5/8 1 5/8 5/ /16 3 1/2 1 5/8 1 5/8 11/ /8 3 1/2 1 5/8 1 5/8 3/ /16 3 1/2 1 3/4 1 3/4 3/ /4 3 1/2 1 7/8 1 7/8 13/ /16 3 1/ / /8 3 1/ / /16 3 1/2 2 1/8 2 1/8 15/ /2 3 1/2 2 1/8 2 1/ /8 3 3/4 2 1/4 2 1/4 1 1/8 6 Point and 12 Point, Thin Wall, Extra Long Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /8 3 1/2 15/16 1 1/4 7/ /16 3 1/ /4 7/ /4 3 1/2 1 1/16 1 1/4 15/ /16 3 1/2 1 1/8 1 1/4 17/ /8 3 1/2 1 3/16 1 1/4 9/ /16 3 1/2 1 5/16 1 5/16 5/8 inches Surface rive and Fast Lead, Standard Length Part Part Hex Overall iameter iameter Opening Surface Number Opening Length Nose End rive End epth rive Fast Lead In. () () () () SF /16 1 7/8 7/8 1 1/4 7/16 SF-6418* - 9/16 1 7/8 7/8 1 1/4 7/16 SF-6120 FL /8 1 7/ /4 7/16 SF /16 1 7/8 1 1/8 1 1/4 7/16 SF-6124 FL /4 1 7/8 1 1/4 1 1/4 15/32 SF-6424* - 3/4 1 7/8 1 1/16 1 1/4 15/32 SF /16 1 7/8 1 1/4 1 1/4 17/32 SF-6128 FL /8 1 7/8 1 3/8 1 3/8 9/16 SF / /2 1 1/2 5/8 - FL /8 1 5/8 5/8 *Thin Wall inches 130

137 5/8" Square rive Sockets, SE Surface rive and Fast Lead, Extra Long Length Part Part Hex Overall iameter iameter Opening Surface Number Opening Length Nose End rive End epth rive Fast Lead In. () () () () SF-6320 FL /8 3 1/ /4 7/16 SF-6520* - 5/8 3 1/2 15/16 1 1/4 7/16 SF-6522* - 11/16 3 1/ /4 7/16 SF-6324 FL /4 3 1/2 1 1/4 1 1/4 15/32 SF-6524* - 3/4 3 1/2 1 1/16 1 1/4 15/32 SF-6326 FL /16 3 1/2 1 1/4 1 1/4 17/32 SF-6526* - 13/16 3 1/2 1 1/8 1 1/4 17/32 SF-6328 FL /8 3 1/2 1 3/8 1 3/8 9/16 SF-6330 FL /16 3 1/2 1 1/2 1 1/2 5/8 *Thin Wall 5/8" Square rive Universal Wrenches, SE 6 Point inches E udd Wheel Socket Part Hex Overall Socket Socket Nose End learance Number Opening Length Length iameter iameter epth 6 Point In. () In. () In. () In. () In. (E) In. S-430 9/ /64 1 1/4 1 1/4 2 5/32 33/64 S-432 5/8 2 59/64 1 1/4 1 1/4 7/8 33/64 S-434 3/4 3 3/64 1 3/8 1 1/4 1 1/32 41/64 S /16 3 3/64 1 3/8 1 1/4 1 1/8 41/64 S-563 7/8 3 1/8 1 3/4 1 1/2 1 5/16 29/32 S /16 3 3/64 1 3/8 1 5/16 1 5/16 41/64 S /16 3 1/8 1 3/4 1 1/2 1 3/8 29/32 S /8 3 1/4 1 7/8 1 5/8 1 5/8 1 1/32 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. ombo. 13/16" Square 1 1/2" Hex Part Overall Length Number rive In. mm W-648 5/8 Square

138 1/2" Square rive dapters 128 3/8" to 3/4" Male Square (continued) Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX /8 1/2 Pin EX /8 1/2 all EX /8 1/2 Pin EX /8 1/2 all EX /8 1/2 Pin EX /8 1/2 all EX /8 1/2 Pin EX /8 1/2 all EX /8 1/2 Pin EX /8 1/2 all EX /8 1/2 Pin EX-623 5/8 1/2 Pin 1 1/2 38 EX-623-5/8 1/2 all 1 1/2 38 EX /8 1/2 Pin 3 76 EX /8 1/2 Pin EX /8 1/2 Pin EX-751 3/4 1/2 7/32 rill Hole 1 13/16 46 EX-751-3/4 1/2 all 1 13/ /2" Square rive Universal dapters 3/8" to 3/4" Male Square Part Male Female Type of Overall Length Largest iameter Number Square In. Square In. Lock In. mm in. mm MF-39 3/8 1/2 Pin 2 9/ /8 22 MF-39 3/8 1/2 all 2 9/ /8 22 MF-50 1/2 1/2 Pin 2 11/ MF-50 1/2 1/2 all 2 11/ MF-55 1/2 1/2 Pin 3 1/ /4 32 MF-55 1/2 1/2 all 3 1/ /4 32 MF-70 3/4 1/2 7/32 rill Hole 3 5/ /2 38 MF-70 3/4 1/2 all 3 5/ /2 38 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 1/2" Square rive Universal dapters Extension 1/2" Male Square (Standard Type Shown) Part Number Male Female Type of Largest iameter Standard Tension Sq. In. Sq. In. Lock In. mm KHM-37-6 KNM /8 1/2 Pin 3/4 19 KHM-38-6 KNM /8 1/2 Pin 7/8 22 KHM-50-6 KNM /2 1/2 Pin 1 25 KHM KNM /2 1/2 all 1 25 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. Standard lengths are 3", 6", 9" and 12" (76, 152, 229 and 305mm)

139 5/8" Square rive Sockets, Metric 6 Point and Surface rive, Standard Length mm Part Part Hex Overall iameter iameter Opening Number Surface Opening Length Nose End rive End epth 6 Point rive mm () () () () 15mm16 SF-15mm mm16 SF-16mm mm16 SF-17mm mm16 SF-18mm mm16 SF-19mm mm mm16 SF-21mm mm16 SF-22mm mm mm16 SF-24mm Point and Surface rive, Extra Long Length Part Part Hex Overall iameter iameter Opening Number Surface Opening Length Nose End rive End epth 6 Point rive mm () () () () 15mm36 SF-15mm mm mm36 SF-18mm mm36 SF-19mm mm36 SF-21mm mm36 SF-22mm mm mm36 SF-24mm /8" Square rive Extensions 1 7/8" to 15" (48mm to 381mm) Length Part Male Square Type of Overall Length Number In. Lock In. mm EX-624 5/8 Pin 1 7/8 48 EX-624-5/8 all 1 7/8 48 EX /8 Pin 3 76 EX /8 Pin EX /8 Pin EX /8 Pin EX /8 Pin EX /8 Pin EX /8 Pin

140 5/8" Square rive dapters 1/2" to 3/4" Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX-505 1/2 5/8 Pin 1 7/8 48 EX-505-1/2 5/8 all 1 7/8 48 EX /2 5/8 Pin 3 76 EX /2 5/8 Pin EX /2 5/8 Pin EX /2 5/8 Pin EX /2 5/8 Pin EX /2 5/8 Pin EX-752 3/4 5/8 7/32 rill Hole 1 7/8 48 EX-752-3/4 5/8 all 1 7/8 48 5/8" Square rive Universal dapters 1/2" to 5/8" Male Square Part Male Female Type of Overall Length Largest iameter Number Square In. Square In. Lock In. mm in. mm MF-51 1/2 5/8 Pin 3 5/ /4 32 MF-51 1/2 5/8 all 3 5/ /4 32 MF-62 5/8 5/8 Pin 3 1/ /4 32 MF-62 5/8 5/8 all 3 1/ /4 32 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. TOOL TIP Extensions with pin locks securely hold the socket in power applications. For hand applications, ball locks allow sockets to be changed quickly and easily. 133

141 3/4" Square rive Sockets, SE 6 Point and 12 Point, Standard Length inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /2 2 13/16 1 1/2 11/ /16 2 7/8 1 1/2 7/ / /16 1 1/2 7/ / /8 1 1/2 7/ / /4 1 1/2 15/ / /8 1 1/2 17/ / /2 1 1/2 9/ / /2 1 1/2 5/ /8 1 5/8 5/ / /4 1 3/4 11/ /8 2 1/8 1 3/4 1 3/4 3/ /16 2 1/8 1 7/8 1 3/4 3/ /4 2 1/ /4 13/ /16 2 1/ /4 13/ /8 2 1/8 2 1/8 2 1/8 13/ /16 2 1/4 2 1/4 2 1/8 15/ /2 2 1/4 2 1/4 2 1/ /16 2 1/4 2 3/8 2 1/ /8 2 1/4 2 1/2 2 1/8 1 1/ /16 2 1/4 2 1/2 2 1/8 1 1/ /4 2 1/4 2 5/8 2 1/8 1 1/ /16 2 1/4 2 3/4 2 1/8 1 1/ /8 2 1/4 2 3/4 2 1/8 1 1/ /16 2 1/4 2 7/8 2 1/8 1 1/ /8 2 7/8 2 1/8 1 3/ /16 2 3/ /8 1 3/ /8 2 3/8 3 1/8 2 1/8 1 3/ /16 2 1/2 3 1/8 2 1/8 1 1/ /4 2 1/2 3 1/4 2 1/8 1 1/ /16 2 1/2 3 3/8 2 1/8 1 1/ /8 2 5/8 3 1/2 2 1/8 1 5/ /16 2 5/8 3 1/2 2 1/8 1 5/ /2 2 5/8 3 1/2 2 1/8 1 5/8 134

142 3/4" Square rive Sockets, SE 6 Point and 12 Point, Thin Wall, Standard Length inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () / /8 1 3/8 15/ / /4 1 3/8 17/ / /16 1 3/8 9/ / /8 1 3/8 5/ /16 1 7/16 5/ / /2 1 1/2 11/ /8 2 1/8 1 5/8 1 5/8 3/ /16 2 1/8 1 5/8 1 5/8 3/ /4 2 1/8 1 3/4 1 3/4 13/ /16 2 1/8 1 7/8 1 3/4 13/ /8 2 1/ /4 13/ /16 2 1/ /4 15/ /2 2 1/4 2 1/8 2 1/ /16 2 1/4 2 3/16 2 1/8 1 1/ /8 2 1/4 2 1/4 2 1/8 1 1/ /16 2 1/4 2 3/8 2 1/8 1 1/ /4 2 1/4 2 7/16 2 1/8 1 1/ /16 2 1/4 2 1/2 2 1/8 1 1/ /8 2 1/4 2 5/8 2 1/8 1 1/ /8 2 3/4 2 1/8 1 3/ /16 2 3/8 2 13/16 2 5/8 1 3/ /16 2 3/ /8 1 3/ /4 2 3/ /8 1 3/8 135

143 3/4" Square rive Sockets, SE 6 Point and 12 Point, Extra Long Length inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () / /16 1 1/2 11/ / /16 1 1/2 7/ / /8 1 1/2 7/ / /4 1 1/2 15/ / /8 1 1/2 17/ / /16 1 1/2 9/ / /2 1 1/2 5/ /2 1 1/2 5/ / /8 1 5/8 11/ / /4 1 3/4 3/ / /4 1 3/4 3/ / /8 1 3/4 13/ / /4 13/ / /8 2 1/8 13/ / /8 2 1/8 15/ / /4 2 1/ / /8 2 1/ / /2 2 1/8 1 1/ / /2 2 1/8 1 1/ / /8 2 1/8 1 1/ / /4 2 1/8 1 1/ / /4 2 1/8 1 1/ / /4 2 1/8 1 1/ /8 2 7/8 2 1/8 1 3/ /4 4 1/4 3 1/4 2 1/8 1 1/ /8 4 1/4 3 3/8 2 1/8 1 5/8 6 Point and 12 Point, Thin Wall, Extra Long Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () / /8 1 3/8 15/ / /4 1 3/8 17/ / /8 1 3/8 9/ / /8 1 3/8 5/ /16 1 7/16 5/ / /2 1 1/2 11/ / /8 1 5/8 3/ / / /16 3/ / /4 1 3/4 13/ / /8 1 3/4 13/ / /4 13/ / /4 15/ / /8 2 1/ / /4 2 1/8 1 1/ / /2 2 1/8 1 1/ /8 2 3/4 2 1/8 1 3/8 136 inches

144 3/4" Square rive Sockets For SE Square Nuts Single Square and ouble Square, Standard Length Part Part Square Overall iameter iameter Opening Single ouble Opening Length Nose End rive End epth Square Square In. () () () () / /4 1 1/2 7/ / /8 1 1/2 7/ / /2 1 1/2 15/ / /8 1 5/8 17/ / /4 1 3/4 5/ /16 2 1/8 1 7/8 1 3/4 5/ / /4 5/ /16 2 1/ /4 11/ /8 2 1/8 2 1/8 2 1/8 3/ /16 2 1/8 2 1/4 2 1/8 5/ /4 2 1/8 2 1/4 2 1/8 5/ /16 2 1/8 2 1/2 2 1/8 5/8 3/4" Square rive Universal Wrenches, SE 6 Point inches E Part Hex Overall Socket Socket Nose End learance Number Opening Length Length iameter iameter epth 6 Point In. () In. () In. () In. () In. (E) In. S / /32 1 3/4 1 1/2 1 3/8 29/32 S /16 4 1/ /16 1 3/4 1 1/2 29/32 S / /32 1 7/8 1 5/8 1 5/8 1 1/32 S /16 4 3/ /4 1 5/8 31/32 S / / /16 1 3/16 S /8 3 29/32 1 7/8 1 5/8 1 5/8 1 1/32 S /8 4 5/32 2 1/16 1 3/4 1 3/4 1 1/32 S /4 4 7/32 2 1/8 1 7/8 1 7/8 1 3/32 S /16 4 7/32 2 1/8 1 7/8 1 7/8 1 3/32 S / /32 2 1/4 2 1/8 2 1/8 1 5/32 S /2 4 11/32 2 1/4 2 1/4 2 1/4 1 5/32 S /8 4 11/32 2 3/8 2 3/8 2 3/8 1 3/16 S /8 4 11/32 2 3/8 2 5/8 2 5/8 1 3/16 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 3/4" Square rive udd Wheel Sockets 13/16" Square and ombo. 13/16" Square 1 1/2" Hex Part Overall Length Number rive In. mm W /4" Square /16" Square W-748 3/4" Square 3 3/8 86 ombo. 13/16 Square 1 1/2" Hex 137

145 3/4" Square rive Sockets, Metric Point, Standard Length Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point mm () () () () 17mm mm mm mm mm mm mm47* mm mm mm47* mm mm mm mm47* mm mm mm mm47* mm mm47* mm mm mm mm mm mm mm mm *Thin Wall 3/4" Square rive Sockets, Metric mm 6 Point, Extra Long Length mm Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point mm () () () () 21mm mm57* mm mm57* mm mm mm57* mm mm mm *Thin Wall

146 3/4" Square rive Sockets, Metric 6 Point, Extra Long Length (continued) Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point mm () () () () 27mm57* mm mm mm mm57* mm mm mm mm mm mm *Thin Wall 3/4" Square rive Sockets for Spline Fasteners mm Standard Length Overall iameter iameter Part Spline Nominal Length () Nose End () rive End () Number Size Size In. mm In. mm In. mm MS /4 1 3/ / /8 35 MS /16 1 3/ / /8 35 MS /8 1 13/ / /8 35 MS /16 1 7/ / /8 35 MS / / /16 37 MS / / /32 39 pex spline sockets conform to military specifications MS and MIL-W /4" Square rive Extensions 2 1/4" to 15" (57mm to 381mm) Length Part Male Square Type of Overall Length Number In. Lock In. mm EX-753 3/4 7/32 rill Hole 2 1/4 57 EX-753-3/4 all 2 1/4 57 EX /4 7/32 rill Hole EX /4 all EX /4 7/32 rill Hole EX /4 all EX /4 7/32 rill Hole EX /4 all EX /4 7/32 rill Hole EX /4 all EX /4 7/32 rill Hole EX /4 all EX /4 7/32 rill Hole EX /4 all

147 3/4" Square rive dapters 1/2" to 1" Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX-506 1/2 3/4 Pin 2 51 EX-506-1/2 3/4 all 2 51 EX /2 3/4 Pin 3 76 EX /2 3/4 all 3 76 EX /2 3/4 Pin EX /2 3/4 all EX /2 3/4 all EX /2 3/4 Pin EX /2 3/4 all EX /2 3/4 Pin EX /2 3/4 all EX-625 5/8 3/4 Pin 2 51 EX-625-5/8 3/4 all 2 51 EX /8 3/4 Pin 3 76 EX /4 9/32 rill Hole 2 9/16 65 EX /4 all 2 9/ /4" Square rive Universal dapters 3/4" Male Square Part Male Female Type of Overall Length Largest iameter Number Sq. In. Sq. In. Lock In. mm In. mm MF-75 3/4 3/4 7/32 rill Hole /2 38 MF-75 3/4 3/4 all /2 38 MF-76 3/4 3/4 7/32 rill Hole 4 3/ /4 45 MF-76 3/4 3/4 all 4 3/ /4 45 MF-79 3/4 3/4 7/32 rill Hole 4 1/ MF-79 3/4 3/4 all 4 1/

148 1" Square rive Sockets, SE 6 and 12 Point, Standard Length inches Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /4 2 1/8 1 5/ / /16 2 1/8 1 3/8 2 13/ /8 2 1/8 1 1/2 2 13/ /16 2 1/8 1 1/2 2 13/ /8 1 5/8 2 13/ /16 2 1/8 1 11/ / /8 2 1/8 1 3/4 2 13/ /16 2 1/8 2 1/8 2 13/ /4 2 1/8 2 1/8 2 1/8 13/ /16 2 1/8 2 1/8 2 1/8 13/ /8 2 1/8 2 1/8 2 1/8 13/ /16 2 1/4 2 1/4 2 1/8 15/ /2 2 1/4 2 1/4 2 1/8 15/ /16 2 1/4 2 3/8 2 1/8 15/ /8 2 3/8 2 1/2 2 1/8 15/ /16 2 3/8 2 1/2 2 1/8 15/ /4 2 3/8 2 5/8 2 5/8 1 1/ /16 2 1/2 2 3/4 2 5/8 1 1/ /8 2 1/2 2 3/4 2 5/8 1 1/ /16 2 1/2 2 7/8 2 5/8 1 1/ / /8 1 3/ /16 2 5/ /8 1 3/ /8 2 5/8 3 1/8 2 5/8 1 3/ /16 2 3/4 3 1/4 3 1/4 1 5/ /4 2 3/4 3 1/4 3 1/4 1 5/ /16 2 3/4 3 3/8 3 1/4 1 3/ /8 2 7/8 3 1/2 3 1/4 1 3/ /16 2 7/8 3 1/2 3 1/4 1 3/ /2 2 7/8 3 3/4 3 1/4 1 3/ / /4 3 1/4 1 1/ / /4 3 1/4 1 1/ / /4 1 1/ /4 3 1/ /4 1 5/ /16 3 1/ /4 1 5/8 141

149 1" Square rive Sockets, SE 6 and 12 Point, Thin Wall Standard Length inches 6 Point, Long Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point In. () () () () /16 2 1/8 1 7/16 1 7/8 13/ /8 1 1/2 1 7/8 13/ /16 2 1/8 1 9/16 1 7/8 13/ /8 2 1/8 1 5/8 1 7/8 13/ /16 2 1/8 1 3/4 2 13/ /4 2 1/8 1 13/ / /16 2 1/8 1 7/8 2 13/ /8 2 1/8 1 15/ / /16 2 1/ / /2 2 1/4 2 1/8 2 1/8 15/ /8 2 3/8 2 5/16 2 1/8 15/ /16 2 3/8 2 3/8 2 1/8 15/ /4 2 3/8 2 7/16 2 1/8 1 1/ /16 2 1/2 2 9/16 2 1/8 1 1/ /8 2 1/2 2 5/8 2 5/8 1 1/ /8 2 3/4 2 5/8 1 3/ /8 2 5/8 2 15/16 2 5/8 1 3/ /4 2 3/4 3 1/8 2 5/8 1 5/ /2 2 7/8 3 3/8 3 1/4 1 7/16 Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point In. () () () () / /8 2 1/8 17/ / /16 2 1/8 9/ / /2 2 1/8 5/ /8 2 1/8 5/ / /4 2 1/8 3/ / /8 2 1/8 13/ / /8 2 1/8 13/ / /8 2 1/8 13/ / /4 2 1/8 15/ /2 3 1/4 2 1/4 2 1/8 15/16 inches 142

150 1" Square rive Sockets, SE 6 Point, Extra Long Length inches Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point In. () () () () /4 4 1/4 1 1/4 2 1/8 15/ /16 4 1/4 1 3/8 2 1/8 17/ /8 4 1/4 1 7/16 2 1/8 9/ /16 4 1/4 1 1/2 2 1/8 5/ /4 1 9/16 2 1/8 5/ /16 4 1/4 1 5/8 2 1/8 11/ /8 4 1/4 1 3/4 2 1/8 3/ /16 4 1/4 1 7/8 2 1/8 3/ /4 4 1/4 2 1/8 2 1/8 13/ /16 4 1/4 2 1/8 2 1/8 13/ /8 4 1/4 2 1/8 2 1/8 13/ /16 4 1/4 2 1/4 2 1/8 15/ /2 4 1/4 2 1/4 2 1/ /16 4 1/4 2 3/8 2 1/ /8 4 1/4 2 1/2 2 1/8 1 1/ /16 4 1/4 2 1/2 2 1/8 1 1/ /4 4 1/4 2 5/8 2 5/8 1 1/ /16 4 1/4 2 3/4 2 5/8 1 1/ /8 4 1/4 2 3/4 2 5/8 1 1/ /16 4 1/4 2 7/8 2 5/8 1 1/ /8 2 7/8 2 5/8 1 3/ /16 4 3/ /8 1 3/ /8 4 3/8 3 1/8 2 5/8 1 3/ /16 4 1/2 3 1/8 2 5/8 1 1/ /4 4 1/2 3 1/4 3 1/4 1 1/ /16 4 1/2 3 3/8 3 1/4 1 1/ /8 4 1/2 3 1/2 3 1/4 1 5/ /16 4 1/2 3 1/2 3 1/4 1 5/ /2 4 1/2 3 1/2 3 1/4 1 5/ /16 4 1/2 3 3/4 3 1/4 1 3/ /8 4 1/2 3 3/4 3 1/4 1 3/ /16 4 1/ /4 1 3/ /4 4 5/ /4 1 7/ /16 4 5/ /4 1 7/8 6 Point, Thin Wall, Extra Long Length inches Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point In. () () () () /8 4 1/4 1 7/16 2 1/8 9/ /16 4 1/4 1 1/2 2 1/8 5/ /16 4 1/4 1 9/16 2 1/8 3/ /8 4 1/4 1 5/8 2 1/8 3/ /4 4 1/4 1 13/16 2 1/8 13/ /16 4 1/4 1 7/8 2 1/8 13/ /2 4 1/4 2 1/8 2 1/

151 1" Square rive Sockets, Metric 6 Point, Standard Length mm 6 Point, Long Length mm Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point mm () () () () 21mm mm mm mm mm mm mm mm mm mm mm48* mm mm mm mm mm mm mm mm mm mm mm mm mm *Thin Wall Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point mm () () () () 21mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

152 1" Square rive Sockets for Spline Fasteners Standard Length Overall iameter iameter Part Spline Nominal Length () Nose End () rive End () Number Size Size In. mm In. mm In. mm MS / / MS /16 2 1/ / MS /16 2 3/ / pex spline sockets conform to military specifications MS and MIL-W " Square rive Extensions 2 13/16" to 15" (71mm to 381mm) Length Part Male Square Type of Overall Length Number In. Lock In. mm EX /32 rill Hole 2 13/16 71 EX all 2 13/16 71 EX /32 rill Hole EX all EX /32 rill Hole EX all EX /32 rill Hole EX all EX /32 rill Hole EX all EX /32 rill Hole EX all EX /32 rill Hole EX all I YOU KNOW? pex features a wide selection of extension lengths, styles and sizes. See the Table of ontents for a complete listing. 146

153 1" Square rive dapters 3/4" to 1 1/2" Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX-754 3/4 1 7/32 rill Hole 2 13/16 71 EX-754-3/4 1 all 2 13/16 71 EX /4 1 7/32 rill Hole EX /4 1 all EX /4 1 7/32 rill Hole EX /4 1 all EX /4 1 7/32 rill Hole EX /4 1 all EX /2 1 3/8 rill Hole 3 9/ " Square rive Universal dapters 3/4" to 1" Male Square Part Male Female Type of Overall Length Largest iameter Number Sq. In. Sq. In. Lock In. mm In. mm MF-77 3/4 1 7/32 rill Hole 4 3/ MF-77 3/4 1 all 4 3/ MF /32 rill Hole MF all Universal wrenches must not be used with impact drivers. Maximum operating angle is /4" Square rive dapter 1" Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX /4 9/32 rill Hole 3 1/

154 1 1/2" Square rive Sockets, SE Point, Standard Length inches Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point In. () () () () /4 2 3/4 2 1/ / /16 2 3/4 2 5/ / /8 2 3/4 2 3/ / /16 2 3/4 2 7/ / /2 2 3/4 2 1/ /16 2 3/4 2 5/ /8 2 7/8 2 3/ / /16 2 7/8 2 13/ / /4 2 7/8 2 7/ / / / / / / / /4 3 1/4 1 1/ /8 3 1/4 3 1/4 1 3/ /16 3 1/8 3 1/4 3 1/4 1 3/ /8 3 1/8 3 1/4 3 1/4 1 3/ /16 3 1/4 3 1/4 3 1/4 1 1/ /4 3 1/4 3 3/8 3 1/4 1 1/ /16 3 1/4 3 3/8 3 1/4 1 1/ /8 3 3/8 3 1/2 3 1/4 1 5/ /16 3 3/8 3 1/2 3 1/4 1 5/ /2 3 3/8 3 3/4 3 1/4 1 5/ /16 3 1/2 3 3/4 3 1/4 1 3/ /8 3 1/ / /16 3 1/ / /4 3 5/8 4 1/ / /16 3 5/8 4 1/ / /8 3 5/8 4 1/ / /16 3 5/8 4 1/ / /8 4 1/ / /16 3 5/8 4 3/ / /8 3 7/8 4 3/ / /16 3 7/8 4 3/ / / / / / / / /16 4 1/8 5 1/ / /2 4 1/4 5 1/ / /8 4 1/4 5 1/ / /4 4 1/4 5 1/ / /8 4 1/4 5 3/ / /8 5 3/ / /8 4 1/ / /4 4 3/ /8 4 3/4 6 1/ /2 4 7/8 6 1/ / /4 5 1/8 6 3/ /8

155 1 1/2" Square rive dapters 1" Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX /2 9/32 rill Hole 3 15/ EX /2 all 3 15/ /2" Square rive Sockets, SE 6 Point, Standard Length Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point In. () () () () /4 4 1/8 3 3/ / /8 4 1/8 3 7/ / /2 4 1/ / /8 4 1/ / /4 4 1/8 4 1/ / /8 4 1/8 4 1/ / /8 4 3/8 4 7/ / /2 4 3/4 5 1/2 5 1/2 2 1/ /8 4 3/4 5 1/2 5 1/2 2 1/ /4 4 3/4 5 3/4 5 3/4 2 1/ /8 4 3/ / / / /4 5 1/ /2 5 3/8 6 1/ /8 inches 2 1/2" Square rive dapter 1 1/2" Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX /2 2 1/2 3/8 rill Hole 5 3/

156 Reversible Sockets for SE Hex Head Sheet Metal Screws 150 Standard Magnetic Part Number Hex Size Overall Length Outside iameter Roll Pin Part Number SW-350 1/4 9/16 3/8 21-S SW-90 1/4 9/16 7/16 21-S SW-90-* 1/4 9/16 7/16 21-S SW-984 5/16 9/16 9/16 21-S SH /32 9/16 9/16 21-S SH-400 3/8 11/16 11/16 21-S SH-401 7/16 23/32 3/4 21-S SH /16 3/4 13/16 21-S *Tapered Ends Part Number Hex Size Overall Length Outside iameter Spring Pin Part Number MSW-350 1/4 31/32 3/8 21-S MSW-90 1/4 31/32 7/16 21-S MSW-90-* 1/4 31/32 7/16 21-S MSW-984 5/16 31/32 9/16 21-S MSW-984-* 5/16 31/32 9/16 21-S MSH /32 31/32 9/16 21-S MSH-400 3/8 1 1/8 11/16 21-S MSH-401 7/16 1 5/32 3/4 21-S MSH /16 1 3/16 13/16 21-S *Tapered Ends Shanks for Reversible Sockets Part Number Male Hex Power rive Male Hex Size Overall Length SH-629 1/4 1/4 2 SH /4 1/4 3 SH /4 1/4 4 SH /4 1/4 5 SH /4 1/4 6 SH-57 1/4 1/4 2 Full Length Hex SH /4 1/4 3 Full Length Hex SH /4 1/4 4 Full Length Hex SH /4 1/4 6 Full Length Hex SH /4 1/4 8 Full Length Hex SH-59 1/4 5/16 2 SH /4 5/16 3 SH /4 5/16 4 SH /4 5/16 6 SH-412 1/4 3/8 2 SH-413 1/4 7/16 2 SH-414 1/4 1/2 2 SH-913 7/16 5/16 2 SH-404 7/16 3/8 2 SH-406 7/16 1/2 2

157 Tap Holding Sockets Male Hex rive, SE (Tap not included) Male Hex rive, Metric Tap Male Socket Length Socket iameter Part Number Size Hex In. mm In. mm SJ-935-1/4 1/4 7/16 15/ /8 16 SJ-935-5/16 5/16 1/2 15/ /8 16 SJ-935-3/8FS 3/8 9/ /32 17 SJ-935-7/16 7/16 5/ /4 19 SJ-935-1/2 1/2 3/4 1 1/4 32 7/8 22 (Tap not included) Tap Male Socket Length Socket iameter Part Number Size Hex In. mm In. mm SJ MXM6 M / /8 16 SJ MXM8 M / /8 16 SJ MXM10 M /32 17 SJ MXM8 M /16 21 SJ MXM12 M /16 21 Female Square rive, SE Tap Female Socket Length Socket iameter Part Number Size Hex In. mm In. mm H #10 3/8 1 1/2 38 3/4 19 H-100-1/4 1/4 3/8 1 1/2 38 3/4 19 H-100-5/16 5/16 3/8 1 1/2 38 3/4 19 H-100-3/8FS 3/8 3/8 1 1/2 38 3/4 19 H-100-7/16 7/16 3/8 1 1/2 38 3/4 19 H-100-1/2 1/2 3/8 1 1/2 38 3/4 19 H-100-5/8 5/8 3/8 1 3/ H-100-3/4 3/4 3/ HE-100-1/4 1/4 1/2 1 1/2 38 7/8 22 HE-100-5/16 5/16 1/2 1 1/2 38 7/8 22 HE-100-3/8FS 3/8 1/2 1 1/2 38 7/8 22 HE-100-7/16 7/16 1/2 1 1/2 38 7/8 22 HE-100-1/2 1/2 1/2 1 5/8 41 7/8 22 HE-100-5/8 5/8 1/2 1 3/ HE-100-3/4 3/4 1/ TOOL TIP n pex tap holding adapter allows you to convert your power tool into a tap drill. 151

158 Grease Fitting Sockets For ngled Grease Fittings, eep and Shallow roach epth For Straight Grease Fittings Part Number Hex Square Overall Length roach epth Magnet epth 6 Point Magnetic Size rive In. mm In. mm In. mm ZN-112-3/8 1/4 1 1/4 32 9/ ZN-312 MZN-312 3/8 3/8 1 1/2 38 9/ /32 6 ZN-512-3/8 1/2 1 1/2 32 9/ ZN-114-7/16 1/4 1 1/4 32 7/ ZN-314 MZN-314 7/16 3/8 1 1/2 38 7/ /16 11 ZN-514 MZN-514 7/16 1/2 1 1/2 38 7/ /16 11 ZE-112-3/8 1/4 1 1/4 32 1/ ZE-312-3/8 3/8 1 1/2 38 1/ ZE-512-3/8 1/2 1 1/2 32 1/ ZE-314-7/16 3/8 1 1/2 38 3/ ZE-514-7/16 1/2 1 1/2 38 3/ Part Number Hex Square Overall Length roach epth Magnet epth 6 Point Magnetic Size rive In. mm In. mm In. mm Z-110 M Z-110 5/16 1/ /8 3 21/64 8 Z-310 M Z-310 5/16 3/8 1 1/4 32 1/8 3 21/64 8 Z-510 M Z-510 5/16 1/2 1 1/2 38 1/8 3 19/64 7 Z-112-3/8 1/ / Z-312-3/8 3/8 1 1/4 32 1/ Z-512-3/8 1/2 1 1/2 38 1/ Z-314 M Z-314 7/16 3/8 1 1/4 32 3/ /64 9 Z-514 M Z-514 7/16 1/2 1 1/2 38 3/16 5 3/8 10 TOOL TIP Specially designed pex sockets are the easy way to install or remove grease fittings. 152