Gecko Connectors Introduction
|
|
- Francine Wiggins
- 6 years ago
- Views:
Transcription
1 Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male able ssemblies Tooling
2 Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining, this range brings the best of the high-reliability specifications to a smaller size. Gecko provides a low-profile, dual-row solution for all variations of cable-to-board, board-to-board and cable-to-cable interconnect requirements. With up to 50 contacts per connector, but still capable of 2 per contact, Gecko gives both significant weight and space-saving advantages over Micro-D connections. The Gecko range offers either latching connectors, for maximum weight and space-saving, or Screw-Lok connectors for maximum mating strain relief. GEKO 2 per contact (all electrically loaded; 2.8 per individual contact) 4-finger Patented* contact design to maintain electrical contact through high vibration and shock eryllium opper ontact for improved temperature range: -65 to ,000 Mating cycles durability Weight and Space-saving over Micro-D connector products Future-proofed Materials - Halogen-free, PFOS-free, SVH-free and RoHS compliant Low outgassing properties % TML, 0.01% VM, 0.26 WVR (Water Vapour Recovered) ll P connectors available in Tape and Reel for automation *Granted US , Pending G , Pending EP Gecko Screw-Lok Gecko with Latches Strong stainless-steel screw fixings for maximum strain relief Lightweight hoods for additional cable protection and shielding Pre-wired contacts available for prototyping and pre-production The maximum weight and space saving, designed with lightweight robust latches for minimal P real estate Product range includes complete cable assemblies, ideal for prototyping and pre-production 18
3 Gecko onnectors Product Features GEKO Four Finger eryllium opper ontact Unique patented pending high-reliability contact design ensures signal integrity under extremes of bump, vibration and shock. Durable to over 1,000 mating cycles. Keyway Polarisation Points 3 polarising points on each component prevent mis-mating. No. 1 Position identified, Potting Wall Housings are clearly marked with identifier for fast visual inspection. able connectors feature a rear potting wall adding an extra level of strain relief. Packaged in Tape & Reel ll connectors for P assembly are available packaged in industry standard Tape and Reel format for automated assembly. Gecko Screw-Lok - Robust Metal ackshells Lightweight aluminium hoods / backshells available for all connector sizes from stock. Supplied with tie-bands to attach external braiding for shielded cable assemblies. Gecko with Latches - Pre-assembled able onfigurations able connectors supplied in ready-made cable assemblies. Single and double-ended configurations available in standard lengths off-the-shelf, or custom assemblies on request. Gecko Screw-Lok - Maximum strain relief Fixings with 2mm screw thread for maximum board and connection retention or strain relief. Gecko with Latches - ombined Latching & P retention Optional latches allow simple and fast de-latching and require no special tooling. Solder tabs for SMT and barbs for P Tail versions ensure retention to the P. 19
4 Gecko onnectors Specifications Materials Mouldings: Female contacts: Male contacts PT/SMT: rimp: Finish: Screw-Loks: Latches: Electrical urrent Individual contacts in isolation: ll contacts simultaneously: Working voltage t sea level 1006 mbar: t altitude 44 mbar: Voltage proof t sea level 1013 mbar: ontact resistance Initial: fter conditioning: Insulation resistance Initial: fter conditioning: Glass-filled High Temperature Thermoplastic UL94V-0 eryllium opper Phosphor ronze rass μm (8 12μ") Gold, over μm (60 80μ") Nickel Stainless Steel opper lloy 2.8 max (t 25 ) 2.0 max (t 25 ) 450V D or peak 250V D or peak 600V D or peak 20mΩ max 25mΩ max 10GΩ min at 500V D >1GΩ min at 500V D Pin Numbering Mechanical ontact durability: 1000 operations Mating forces (per contact pair) Insertion force: 2.8N max Withdrawal force: 0.2N min ontact retention in moulding: 6N min Environmental Environmental classification: Operating temperature: *Vibration sensitivity: *ump severity: *Shock severity: *cceleration severity: 65/150/56 days at 93% RH -65 to Hz to 2000Hz, 1.5mm, 198mm/s 2 (20G) duration 6 hours 390m/s 2 (40G), 4000 ±10 bumps 981m/s 2 (100G) for 6ms in Z axis 490m/s 2 (50G) for 11ms in X & Y axes 490m/s 2 (50G) * Tested with latched connectors. GEKO FEMLE MLE
5 Gecko Screw-Lok Mating Profiles FEMLE GEKO SREW-LOK VERTIL P TIL VERTIL P TIL VERTIL SMT LE max MLE VERTIL SMT max LE max max max 21
6 Gecko Screw-Lok onnectors Female P Tail 4-finger eryllium opper contact. Stainless steel screw fixing to mate with applicable male connector. Positive keyway polarisation features. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to GEKO SREW-LOK 3mm P TIL LULTION x (Total No. of contacts - 2) D M D No. 1 contact 2.00 Ø Ø3.00 Ø /F HEX Ø0.55 Recommended P oard Pattern G125 - F V1 XX 05 F1 X PKGING R Tape & Reeled P Loose TYPE V1 3mm P Tail 05 Gold TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 22
7 Gecko Screw-Lok onnectors Female Surface Mount GEKO SREW-LOK 4-finger eryllium opper contact. Stainless steel screw fixing to mate with applicable male connector. Positive keyway polarisation features. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to vailable in Tape and Reel Packaging, with Pick and Place cap. SURFE MOUNT LULTION x (Total No. of contacts - 2) D M D No. 1 contact 0.15 max 2.00 Ø Ø /F HEX 1.20 Ø Recommended P oard Pattern G125 - F S1 XX 05 F1 X PKGING R Tape & Reeled P Loose TYPE S1 Surface Mount 05 Gold TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 23
8 Gecko Screw-Lok onnectors Female rimp Housings Features 2.5mm potting wall for extra security. No. 1 position identified on moulding. 3 polarising points on each housing prevent mis-mating. vailable without fixing screws, for use with metal hoods shown on a following page. Use with female crimp contacts and pre-cabled contacts shown on following pages. GEKO SREW-LOK FEMLE LULTION x (Total No. of contacts - 2) D D No. 1 contact M Ø /F HEX TOOLS Recommended rimp Tool Z Positioner Z ontact Insertion/Removal Tool Z Female contacts shown on following pages. Instruction sheets available at /instructions. G XX 96 XX TYPE 224 Female Housing TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 LTHES F1 Floating Hex Socket fixings 00 No fixings (use with Metal Hoods) 96 Housing 24
9 Gecko Screw-Lok onnectors Female rimp ontacts, Dummy ontact GEKO SREW-LOK 4-finger eryllium opper contact on a female connector. rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to Instruction video online at /harwintv. Dummy ontact can be used for additional polarisation of keying of multiple connectors. lso called lanking Plug. ONTTS DUMMY ONTT 26 WG WG WIRE STRIPPING DETILS Ident Groove 26 WG - Ø0.80 max 28 to 32 WG - Ø0.72 max 1.50 to 1.75 TOOLS Recommended rimp Tool Z Positioner Z ontact Insertion/Removal Tool Z Female crimp housing shown on previous page. Pre-cabled contacts shown on following page. Instruction sheets available at /instructions. G125 0XX TYPE 001 Female 26 WG crimp contact 002 Female WG crimp contact 020 Dummy ontact (blanking plug) 05 Gold 25
10 Gecko Screw-Lok onnectors Female rimp ontacts Pre-rimped Wires 4-finger eryllium opper contact. Ready for assembling to housing. rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to For non-standard cable lengths, please visit harwin.com/cable-assemblies and fill in your requirements. GEKO SREW-LOK FEMLE SINGLE ENDED FEMLE FEMLE able Length able Length TOOLS ontact Insertion/Removal Tool Z Female crimp housing and loose contacts shown on previous pages. Instruction sheets available at /instructions. G125 F WX XXXX X 94 GENDER - FIRST END F Female LE SIZE W1 26 WG W2 28 WG W3 30 WG W4 32 WG LE OLOUR 94 White TERMINTION - SEOND END L Loose cut end F Female LE LENGTH mm mm (double-ended) mm (single-ended) 26
11 Gecko Screw-Lok onnectors Female Metal Hood / ackshell GEKO SREW-LOK Supplied as a kit, including 2 metal hood halves, tie-band (not shown), extended fixing screws for female connectors, and short screws to join the two hood halves together. Use with G xx9600 female crimp housings without fixings - fixings are supplied with these hoods. Tie-band can be used to attached external braid, to construct a shielded cable assembly. HOOD / KSHELL D 6.20 LULTION x (Total No. of contacts - 2) D /F HEX 9.60 M G XX F1 TOTL NO. OF ONTTS 06, 10, 12, 16 27
12 Gecko Screw-Lok onnectors Male Vertical P Tail Stainless steel screw fixing to mate with applicable female connector. Order nuts for board-mount separately - see bottom of page. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to GEKO SREW-LOK P TIL LULTION x (Total No. of contacts - 2) M2 No. 1 contact Ø2.20 Ø M2 Ø0.55 Recommended P oard Pattern TYPE V1 3mm P Tail TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 G125 M V1 XX 05 M2 X PKGING R Tape & Reeled P Loose 05 Gold REQUIRED HRDWRE Order separately from connector Hexagonal oard Mount Nut Slotted oard Mount Nut 1.60 Ø4.00 M2 M /F ORDER ODE ORDER ODE G G
13 Gecko Screw-Lok onnectors Male Vertical Surface Mount GEKO SREW-LOK Stainless steel screw fixing to mate with applicable female connector. Order nuts for board-mount separately - see bottom of page. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to SURFE MOUNT LULTION x (Total No. of contacts - 2) M2 No. 1 contact 1.20 Ø Ø max M Recommended P oard Pattern TYPE S1 Surface Mount TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 G125 M S1 XX 05 M2 X PKGING R Tape & Reeled P Loose 05 Gold REQUIRED HRDWRE Order separately from connector Hexagonal oard Mount Nut Slotted oard Mount Nut 1.60 Ø4.00 M2 M /F ORDER ODE ORDER ODE G G
14 Gecko Screw-Lok onnectors Male rimp Housing Features 2.5mm potting wall for extra security. No. 1 position identified on moulding. 3 polarising points on each housing prevent mis-mating. Use with male crimp contacts and pre-cabled contacts shown on following pages. GEKO SREW-LOK MLE LULTION x (Total No. of contacts - 2) M2 No. 1 contact TOOLS Recommended rimp Tool Z Positioner Z ontact Insertion/Removal Tool Z Male contacts shown on following pages. Instruction sheets available at /instructions. G XX 96 M1 TYPE 324 Male Housing 96 Housing TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 30
15 Gecko Screw-Lok onnectors Male rimp ontacts, Dummy ontact GEKO SREW-LOK rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to Instruction video online at /harwintv. Dummy ontact can be used for additional polarisation of keying of multiple connectors. lso called lanking Plug. ONTTS DUMMY ONTT 26 WG WG WIRE STRIPPING DETILS Ident Groove 26 WG - Ø0.80 max 28 to 32 WG - Ø0.72 max 1.50 to 1.75 TOOLS Recommended rimp Tool Z Positioner Z ontact Insertion/Removal Tool Z Male crimp housing shown on previous page. Pre-cabled contacts shown on following page. Instruction sheets available at /instructions. G125 XXX TYPE 101 Male 26 WG crimp contact 05 Gold 102 Male WG crimp contact 020 Dummy ontact (blanking plug) 31
16 Gecko Screw-Lok onnectors Male rimp ontacts Pre-rimped Wires Ready for assembling to housing. rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to For non-standard cable lengths, please visit harwin.com/cable-assemblies and fill in your requirements. GEKO SREW-LOK MLE SINGLE ENDED MLE MLE able Length able Length MLE FEMLE TOOLS ontact Insertion/Removal Tool Z able Length Male crimp housing and loose contacts shown on previous pages. Instruction sheets available at /instructions. GENDER FIRST END M Male LE SIZE W1 26 WG W2 28 WG W3 30 WG W4 32 WG G125 M WX XXXX X 94 LE OLOUR 94 White TERMINTION SEOND END L Loose cut end F Female M Male LE LENGTH mm mm (double-ended) mm (single-ended) 32
17 Gecko Screw-Lok onnectors Male Metal Hood / ackshell GEKO SREW-LOK Supplied as a kit, including 2 metal hood halves, tie-band (not shown), and short screws to join the two hood halves together. Use with G xx96M1 male crimp housings. Tie-band can be used to attached external braid, to construct a shielded cable assembly. HOOD / KSHELL D 6.20 LULTION x (Total No. of contacts - 2) D /F HEX G XX 00 TOTL NO. OF ONTTS 06, 10, 12, 16 33
18 Gecko with Latches Mating Profiles FEMLE VERTIL P TIL VERTIL P TIL VERTIL SMT LE max GEKO WITH GEKO LTHES HORIZONTL P TIL max MLE VERTIL SMT max LE 9.10 max 9.20 max 9.70 max 34
19 Gecko with Latches onnectors Female P Tail GEKO WITH GEKO LTHES 4-finger eryllium opper contact. Positive keyway polarisation features. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to mm P TIL 4.5mm P TIL No. 1 contact No. 1 contact Ø0.40 Ø0.40 Ø0.55 min Recommended P oard Pattern LULTION x (Total No. of contacts - 2) G125 - F VX XX 05 L0 X Ø0.55 min Recommended P oard Pattern PKGING R Tape & Reeled P Loose TYPE V1 V2 3mm P Tail 4.5mm P Tail 05 Gold TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 35
20 Gecko with Latches onnectors Female Surface Mount 4-finger eryllium opper contact. Positive keyway polarisation features. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to vailable in Tape and Reel Packaging, with Pick and Place cap. SURFE MOUNT LULTION x (Total No. of contacts - 2) GEKO WITH LTHES No. 1 contact Ø0.40 Recommended P oard Pattern 0.15 max G125 - F S1 XX 05 L0 X PKGING R Tape & Reeled P Loose TYPE S1 Surface Mount 05 Gold TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 36
21 Gecko with Latches onnectors Female rimp Housings GEKO WITH LTHES Features potting wall for extra security. No. 1 position identified on moulding. Withstands extremes of temperature: -65 to polarising points on each housing prevent mis-mating. FEMLE LULTION x (Total No. of contacts - 2) No. 1 contact TOOLS Recommended rimp Tool Z Positioner Z ontact Insertion/Removal Tool Z Female contacts shown on following pages. Instruction sheets available at /instructions. G XX 96 L0 LTHES L0 No Latches TYPE 204 Female Housing 96 Housing TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 37
22 Gecko with Latches onnectors Female rimp ontacts, Dummy ontact 4-finger eryllium opper contact on a female connector. rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to Instruction video online at /harwintv. Dummy ontact can be used for additional polarisation of keying of multiple connectors. lso called lanking Plug. ONTTS DUMMY ONTT GEKO WITH LTHES 26 WG WG WIRE STRIPPING DETILS Ident Groove 26 WG - Ø0.80 max 28 to 32 WG - Ø0.72 max 1.50 to 1.75 TOOLS Recommended rimp Tool Z Positioner Z ontact Insertion/Removal Tool Z Female crimp housing shown on previous page. Pre-cabled contacts shown on following page. Instruction sheets available at /instructions. G125 0XX TYPE 001 Female 26 WG crimp contact 002 Female WG crimp contact 020 Dummy ontact (blanking plug) 05 Gold 38
23 Gecko with Latches onnectors Female rimp ontacts Pre-rimped Wires GEKO WITH LTHES 4-finger eryllium opper contact. Ready for assembling to housing. rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to For non-standard cable lengths, please visit harwin.com/cable-assemblies and fill in your requirements. FEMLE SINGLE ENDED FEMLE FEMLE able Length able Length TOOLS ontact Insertion/Removal Tool Z Female crimp housing and loose contacts shown on previous pages. Full able assemblies shown on following page. Instruction sheets available at /instructions. G125 F WX XXXX X 94 GENDER - FIRST END F Female LE SIZE W1 26 WG W2 28 WG W3 30 WG W4 32 WG LE OLOUR 94 White TERMINTION - SEOND END L Loose cut end F Female LE LENGTH mm mm (double-ended) mm (single-ended) 39
24 Gecko with Latches onnectors Female able ssemblies 4-finger eryllium opper contact. No. 1 position identified on moulding. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to ack potted for added strain relief. For non-standard cable lengths, please visit harwin.com/cable-assemblies and fill in your requirements. PRT NUMERING SYSTEM GEKO WITH LTHES G125 F X XX 05 L0 - XXXX X TERMINTION - SEOND END L Loose cut end F Female connector GENDER - FIRST END F Female LE SIZE 1 26 WG 2 28 WG 3 30 WG 4 32 WG LE LENGTH mm mm (double-ended) mm (single-ended) LTHES L0 No Latches TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, Gold 40
25 Female able ssemblies GEKO WITH GEKO LTHES See previous page for cable length options. able assemblies are constructed with ontact 1 attached to ontact 1, ontact 2 to ontact 2, etc. FEMLE SINGLE ENDED No. 1 contact able Length ORDER ODE G125-FXXX05L0-XXXXL FEMLE FEMLE No. 1 contact able Length No. 1 contact ORDER ODE G125-FXXX05L0-XXXXF 41
26 Gecko with Latches onnectors Male Vertical P Tail Secure fixing to the P via retention barbs for through hole. Easy-to-release latches require no tooling. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to P TIL LULTION x (Total No. of contacts - 2) GEKO WITH GEKO LTHES No. 1 contact Oval holes required for latches Latch Tail 1.00 Ø0.55 Ø0.40 Recommended P oard Pattern G125 M VX XX 05 LX X TYPE V1 3mm P Tail V2 4.5mm P Tail TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 PKGING R Tape & Reeled P Loose LTH L0 No Latch L1 Latch for 1.6mm P (use with V1) L2 Latch for 2.4mm P (use with V2) 05 Gold 42
27 Gecko with Latches onnectors Male Horizontal P Tail Latched GEKO WITH LTHES Secure fixing to the P via retention barbs for through hole. Surface mount option for automated assembly. Easy-to-release latches tooling available for additional assistance with releasing latches see part numbers Z xx00. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to P TIL LTH SURFE MOUNT LTH No. 1 contact No. 1 contact 8.00 arbs 5.50 Ø0.40 Tail 2.20 Ø0.40 Tail Ø Recommended P oard Pattern LULTION x (Total No. of contacts - 2) Ø SMT Pads Recommended P oard Pattern G125 M HX XX 05 LX X PKGING R Tape & Reeled TYPE H1 H2 3.3mm P Tail 4.8mm P Tail LTH L1 L2 P Loose arbs for 3.3mm P Tail arbs for 4.8mm P Tail TOTL NO. OF ONTTS L3 Surface Mount Latch 06, 10, 12, 16, 20, 26, 34, Gold 43
28 Gecko with Latches onnectors Male Horizontal P Tail Without Latch Secure fixing to the P via retention barbs for through hole. Surface mount option for automated assembly. 2 current capacity. Withstands extremes of temperature: -65 to P TIL FIXING SURFE MOUNT FIXING GEKO WITH LTHES 6.20 No. 1 contact arbs No. 1 contact 5.50 Ø0.40 Tail 2.20 Ø0.40 Tail Ø Recommended P oard Pattern LULTION x (Total No. of contacts - 2) Ø SMT Pads Recommended P oard Pattern TYPE H1 3.3mm P Tail H2 4.8mm P Tail TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 G125 M HX XX 05 LX X PKGING R Tape & Reeled P Loose FIXING L5 arbs for 3.3mm P Tail L6 arbs for 4.8mm P Tail L7 Surface Mount Fixing 05 Gold 44
29 Gecko with Latches onnectors GEKO WITH LTHES Male Vertical Surface Mount Secure fixing to the P via hold-down tabs (SMT). Easy-to-release latches require no tooling. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to P TIL LTH SURFE MOUNT LTH Ø0.40 Ø0.40 No. 1 contact No. 1 contact Holes required for latches Recommended P oard Pattern Latch max 5.80 LULTION x (Total No. of contacts - 2) End pads required for latches max Recommended P oard Pattern TYPE S1 Surface Mount G125 M S1 XX 05 LX X PKGING R Tape & Reeled P Loose TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, Gold LTH L0 L1 L2 L3 No Latch Latch for 1.6mm P Latch for 2.4mm P Surface Mount Latch 45
30 Gecko with Latches onnectors Male rimp Housing Features potting wall for extra security. No. 1 position identified on moulding. Withstands extremes of temperature: -65 to polarising points on each housing prevent mis-mating. Easy to release latches require no tooling. MLE LULTION x (Total No. of contacts - 2) GEKO WITH LTHES No. 1 contact TOOLS Recommended rimp Tool Z Positioner Z ontact Insertion/Removal Tool Z Male contacts shown on following pages. Instruction sheets available at /instructions. G XX 96 LX LTH L0 L4 No Latches Latches (Male Only) TYPE 304 Male Housing 96 Housing TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 46
31 Gecko with Latches onnectors Male rimp ontacts GEKO WITH LTHES rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to Instruction video online at /harwintv. Dummy ontact can be used for additional polarisation of keying of multiple connectors. lso called lanking Plug. ONTTS DUMMY ONTT 26 WG WG WIRE STRIPPING DETILS Ident Groove 26 WG - Ø0.80 max 28 to 32 WG - Ø0.72 max 1.50 to 1.75 TOOLS Recommended rimp Tool Z Positioner Z ontact Insertion/Removal Tool Z Male crimp housing shown on previous page. Pre-cable contacts shown on following page. Instruction sheets available at /instructions. G125 XXX TYPE 101 Male 26 WG crimp contact 05 Gold 102 Male WG crimp contact 020 Dummy ontact (blanking plug) 47
32 Gecko with Latches onnectors Male rimp ontacts Pre-rimped Wires Ready for assembling to housing. rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to For non-standard cable lengths, please visit harwin.com/cable-assemblies and fill in your requirements. MLE SINGLE ENDED MLE MLE GEKO WITH LTHES able Length able Length MLE FEMLE TOOLS ontact Insertion/Removal Tool Z able Length Male crimp housing and loose contacts shown on previous pages. Full able assemblies shown on following page. Instruction sheets available at /instructions. GENDER FIRST END M Male LE SIZE W1 26 WG W2 28 WG W3 30 WG W4 32 WG G125 M WX XXXX X 94 LE OLOUR 94 White TERMINTION SEOND END L Loose cut end F Female M Male LE LENGTH mm mm (double-ended) mm (single-ended) 48
33 Gecko with Latches onnectors Male able ssemblies GEKO WITH LTHES No. 1 position identified on moulding. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to ack potted for added strain relief. 4-finger eryllium opper contact on the female connector. For non-standard cable lengths, please visit harwin.com/cable-assemblies and fill in your requirements. PRT NUMERING SYSTEM G125 M X XX 05 LX - XXXX X TERMINTION - SEOND END L Loose cut end F Female connector M Male connector GENDER - FIRST END M Male LE SIZE 1 26 WG 2 28 WG 3 30 WG 4 32 WG TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 LE LENGTH mm mm (double-ended) mm (single-ended) LTHES L0 No Latches L4 Latches (male connectors only) 05 Gold 49
34 Male able ssemblies See previous page for cable length options. able assemblies are constructed with ontact 1 attached to ontact 1, ontact 2 to ontact 2, etc. MLE SINGLE ENDED able Length GEKO WITH GEKO LTHES No. 1 contact ORDER ODE G125-MXXX05LX-XXXXL MLE FEMLE MLE MLE able Length able Length ORDER ODE G125-MXXX05LX-XXXXF ORDER ODE G125-MXXX05LX-XXXXM 50
35 Gecko onnectors Tooling Instruction sheets can be accessed at /instructions. Gecko rimping Instruction video is available at /harwintv. GEKO HND RIMP TOOL Precision tool with ratchet mechanism and 8-indent form. Must be used with positioner. Instruction sheet available. POSITIONER Must be used with hand crimp tool. ORDER ODE Z ORDER ODE Z INSERTION/REMOVL TOOL For inserting and removing crimped contacts into the rear of mouldings. Instruction sheet available. DE-LTH TOOL For assisting with unmating latched connectors. ORDER ODE Z ORDER ODE Z xx00 Replace xx with No. of ontacts: 06, 10, 12, 16, 20, 26, 34 or 50 51
36 Gecko onnectors Tooling Instruction sheets can be accessed at /instructions. HEX DRIVE IT 1.5mm /F Hex end for Gecko Screw-Lok Hex Socket fixings. For use with torque tooling or similar equipment. LL HEX DRIVER 1.5mm /F Hex end for Gecko Screw-Lok Hex Socket fixings. all-shaped end can be used at a wide range of angles. GEKO ORDER ODE Z ORDER ODE Z SREWDRIVER For use with Gecko Screw-Lok board mount nuts. oard mount nuts to be tightened to a torque of 21 ±2cmN. ORDER ODE Z
Gecko Connectors. SPECIFICATIONS Gecko. mating PROFiles. Mechanical. Materials. Environmental. Electrical.
onnectors SPEIFITIONS Materials Mouldings: Female ontacts: Male ontacts: Finish: Electrical Glass-filled thermoplastic UL94V-0 opper lloy PT / SMT: Phosphor ronze rimp: rass Gold urrent (individual contacts
More informationM300 Connectors Introduction
ontents Introduction Specifications Mating Profiles Jackscrew mm Pitch High-Reliability onnectors Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male
More informationM40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
More informationComponent Specification
1.0 DESCRIPTION OF CONNECTOR AND INTENDED APPLICATION. The M80 series stamped female Trio-Tek open barrel crimp contact and rectangular Trio-Tek crimp housing form part of the Datamate J-Tek range of 2mm
More informationCircular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories
ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors
More information2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
More information17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
More informationDynamic Series Connectors
3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available,
More informationSpecifications. Features. Crimp Type Connectors For Mating To Mate With Pin Wafer Ass y. 2.5mm Pitch Connectors Wire to Board 0.
05 rimp Type onnectors For Mating To Mate With ss y Pitch onnectors Wire to oard onnectors connectors are miniature type connectors which were developed with concepts for versatile usage for P.. board
More informationconnectors D range Connectors Special D Standard D Crimp D High Density D D Accessories COMMERCIAL D SUB-MINIATURE HIGH PERFORMANCE D SUB-MINIATURE
connectors range Special OMMIL SU-MINITU Standard HIGH POMN SU-MINITU LXIL N ST SSMLY SU-MINITU High ensity INS NSITY SU-MINITU ccessories onnectors Special OMMIL SU-MINITU Special range of connectors
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationSCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
More informationPCB layouts. High Density D only. 50 way 50 way DIMENSIONS. 15 way High Density D 26 way High Density D. 62 way High Density D. 44 way High Density D
Straight p.c. - way 0º p.c. - way P layouts 2.84 S 2 Ø 0.76 min. S 2 Ø 0.76 min. Plug viewed from above, socket viewed from below. 2 holes at Ø 3.2 min. (2 holes at Ø 3.0/3. boardlock only)* ONT 2 holes
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses
More informationLow Mating Force how to order (military types)
how to order (military types) M, D, P onnectors Military Part Ordering Procedure Example part number M55302/16610X1 is shown as follows: ody Type/ ontact Style Rows M55302 /166 10 X 1 ontacts per Row Tail
More informationµcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors
Harsh Environment 10Gb Ethernet Micro onnectors 15mm Description µom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping
More informationHow to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationPicoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
More informationHBB CONNECTOR SERIES. Engineering Superior Solutions. September 2015 Smiths Connectors. smithsconnectors.com
HBB CONNECTOR SERIES Engineering Superior Solutions September 2015 Smiths Connectors HBB CONNECTOR SERIES High Power, Quick Release Connectors 2 Table of Contents 4 PRODUCT OVERVIEW 9 COMPETITIVE ADVANTAGES
More information1.27mm DUAL ROW STRAIGHT HEADER
1.27mm DUL ROW STRIGHT HEDER 1295 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ). For PC Solder! vailable in 8 through 100 circuits! Suitable for Low profile and high density 1.27mm pitch! Thermoplastic UL 94V-0.
More informationPCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch
XW4H/XW4K/XW4 P Terminal locks: Push-in SMT Terminals with mm Pitch Push-in Terminals to Easily omplete onnections. P Terminal locks with mm Pitch. Push-in connection method allows repeated repairs. Hold-down
More informationPCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch
New Product XW4H/XW4K/XW4 P Terminal locks: Push-in SMT Terminals with mm Pitch Push-in Terminals to Easily omplete onnections. P Terminal locks with mm Pitch. Push-in connection method allows repeated
More informationThe Centi Line -.075" Contact Spacing
The enti Line -.075" ontact Spacing The annon enti connectors are especially suitable for commercial applications such as computers, instrumentation, communications and audio equipment. They are available
More informationCONNECTORS 2MM SERIES
EDITION 2011 ATI ELECTRONIQUE CONNECTORS 2MM SERIES 210 SERIES INTRODUCTION 210 series is a range of 2 mm pitch connectors for printed-circuit, created for low intensity applications. Its small mass allows
More informationW Electrical Connector Subsea / Underwater / Marine
www.re-marine.com W Electrical onnector Subsea / Underwater / Marine The most common applications: ROV ive ell onnectors Underwater ameras and Lights Underwater Thruster Strain Termination Key eature:
More information2mm pitch, high reliability with lock, board to cable and cable to cable connector
NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet
More informationMIL Class M Series D*M D*MA connectors and crimp contacts
eatures/enefits *M (Removable crimp contacts technology) : QPL listed 24308 class M onnectors *M (Solder bucket) : QPL listed 24308 class M onnectors *M (90 P) : QPL listed 24308 class M onnec tors Non-Magnetic
More informationElectrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
More informationD-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
More informationLuminus Series Amphenol Pcd
Luminus Series Amphenol Pcd Amphenol Pcd Pcd is is one one of of the the world s leading suppliers of of interconnect products for for Military, Commercial Aerospace and and Industrial applications. Located
More informationEMC Shielding. Contents
EMC Shielding Contents Introduction SMT Shielding Clips Shielding Cans for SMT Clips Spring Contacts Positive Stop Extended (Antenna) Box Style Multi-Directional Development Kit EMC Shielding Introduction
More informationMICRO-CONNECTOR CMM SERIES
MICRO-CONNECTOR CMM SERIES CMM Series Micro-connectors NICOMATIC specializes in the design, development and manufacture of electronic connectors. The CMM MICRO CONNECTOR interconnection system is a 2mm
More informationMODULAR TELEPHONE JACKS
dam Technologies, Inc. MODULR TELEPHONE JKS INTRODUTION: dam Tech MTJ series Modular Telephone Jacks are a complete line of P and wire leaded jacks which are UL and S approved and meet all required F rules
More informationEMC Shielding Introduction. RFI Shield Clips Summary EMC SHIELDING.
EMC Shielding Introduction Harwin provides a range of Surface Mount Shield Clips, compatible Shield Cans, and a comprehensive selection of Spring Contacts, to solve a variety of EMC/RFI and grounding issues.
More information1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
More informationDT Family. Contents. DT Family Overview 18 DTV Series 28. Part Numbering System 18 DTMH Series 29. Dimensions 19 DTMN Series 30
ontents T amily Overview 18 TV Series 28 Part Numbering System 18 TMH Series 29 imensions 19 TMN Series 30 onfigurations 20 How To Instructions 31 Required omponents 21-22 Special Modifications 22-23 ccessories
More informationSMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
More informationMicro-D Printed Circuit Board Connectors
PB Printed ircuit Board onnectors ondensed Board Straight BS.075 Inch Spacing Save Space On Your ircuit Board These connectors feature.075 inch row spacing. The board footprint is reduced to match the
More informationA Complete Miniature Range Threaded, Break Away, Bayonet
omplete Miniature Range Threaded, reak way, ayonet onnection Technologies Presentation The micro38999 ranges are made to meet a new generation of applications where space and weight are limited (Tactical
More informationMicro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector
Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
More informationCONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
More informationBRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2
RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14
More information3.3 mm Contact Pitch, Connectors for Internal Power Supplies
. mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5
More informationMiniature Rugged Connector Series
Miniature Rugged Connector Series Miniature Rugged Connector Series Intended for harsh environment applications and used extensively in soldier communications, Amphenol Terrapin is a miniature series of
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.
More informationRWZ CONNECTOR. 1Certified LR Features. Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
isconnectable rimp style Wire-to-wire connectors Features urability With the bellows type contacts, 2, cycles of mating/unmating is guaranteed. In addition, low insertion and withdrawal force is realized.
More information.050" IDC CONNECTORS DUAL ROW SOCKET / PADDLEBOARD PLUG HFCS & HFDP SERIES ADAM TECHNOLOGIES ORDERING INFORMATION HFCS 50 SG. RoHS
DM TECHNOLOGIES.050" IDC CONNECTORS DUL ROW SOCKET / PDDLEORD PLUG HFCS & SERIES INTRODUCTION: dam Tech HFCS Series.050 IDC Sockets are low profile, precision designed flat cable sockets that feature either.050
More informationRA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST
More information0.5mm and 1mm Pitch FPC/FFC Connectors
0.5mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear
More informationSEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
0.5mm and 1mm Pitch onnectors For FP/FF FH Series Flip-lock Features 1. Ease of Use and Space Savings Only one finger or.9n (Newtons) of force is required to lock Hirose s rotational actuator (flip-lock)
More information3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
More information0.5 mm and 1 mm Pitch FPC/FFC Connectors
0.5 mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear
More information8D Series D38999 Aluminum Series
onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationMAXIMUM. Mill-Max Spring-loaded Connectors Minimize Noise
MXIMUM solutions Mill-Max Spring-loaded Connectors Minimize Noise When the power is on, you don t want shock or vibration to create spurious signals. Mill-Max Spring-loaded Connectors provide a reliable
More informationFAZ CONNECTOR. 1Certified LR Connectors for FFC. Features. Specifications. Standards. 1.0mm
mm pitch FZ ONNETOR onnectors for FF Emboss Tape Features Zero insertion force mechanism (ZIF) ZIF mechanism improves wear resistance and extends the mating life of the connector. y moving the slider into
More informationHBB power connector. Product description
HBB power connector Product description Contact technology guarantees high reliability Push lock to mate connector Quick release latch to unmate Ruggedised metal and plastic versions available Cable and
More informationPRODUCT SPECIFICATION
MultiCat TM In-line Power Connector System WIRE-TO-WIRE AND WIRE-TO-BOARD MALE CRIMP CONTACT (201845-00X0) FEMALE CRIMP CONTACT (201846-00X0) PLUG HOUSING (201840-00XX) RECEPTACLE HOUSING (201841-00XX)
More informationRack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS
MR Series Miniature Rectangular / #16 Contacts /.062" Dia. / 13 mps MR 34S-G MR 34P-G Hood The MR Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current
More informationMicrominiature. Micro Edgeboard -.050" Contact Spacing MEB. Specifications. How to Order.
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro dgeboard -.050" ontact Spacing M The Micro dgeboard (M) connector series provides a combination of high density and high reliability for applications in airborne
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
rawing for the most current and accurate design information. 0.5mm and mm Pitch onnectors For FP/FF FH Series Flip-lock Features. ase of Use and Space Savings Only one finger or.9n (Newtons) of force is
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More informationFire & Smoke Resistant Connector
Fire & Smoke Resistant onnector The plastic rectangular solution offering an excellent fire and smoke resistance for Railway indoor applications. ompliant to railway standards Tested according to N 50
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information0.5 mm and 1 mm Pitch FPC/FFC Connectors
0.5 mm and mm Pitch FP/FF onnectors FH Series pr..0 opyright 0 HIROS LTRI O., LT. ll Rights Reserved. Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate
More informationSTRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationmicro38999 SERIES High Vibration Miniature Connectors Qualified According MIL-DTL-38999
micro38999 SERIES High Vibration Miniature onnectors Qualified ccording MIL-TL-38999 8, 8 & 8LT Series Presentation The micro38999 Series (8, 8 and 8LT ranges) is made to meet a new generation of applications
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm (.050") pitch ribbon cables
IDC.54mm (.00") pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm (.0") pitch ribbon cables Features Twin U-slot The twin U-slot is the most important IDC element in JST's
More informationEH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm
Crimp.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19") high
More information9 ORDERING INFORMATION MTJ MTJ SERIES
MODULR JKS Introduction: dam Tech MTJ series Modular Jacks are a complete line of P and wire leaded jacks which are UL and S approved and meet all required F rules and regulations. dam Tech offers a multitude
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
More informationPROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
More informationabout us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.
table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts
More informationMICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
More information0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Features 1. Strong actuator retention Actuator will not be dislodged
More informationWILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
More informationWaterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Product Specifications Ratings Ratings Ratings urrent rating Voltage rating Operating temperature range Storage temperature range Shell size urrent rating 13 16
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
More informationDT Family. DT Family Overview DTM SERIES OVERVIEW DT SERIES OVERVIEW DTP SERIES OVERVIEW
T amily Overview UTSH T, TM, and TP series environmentally sealed connectors are designed for cable to cable and cable to board applications. The T connectors are used in harsh environment applications
More informationSpecifications A2001 SERIES. Standards E E326732
Specifications Current rating:2 C,DC Voltage rating:100v C,DC Temperature range:-40 C~+105 C Contact resistance:10m Max. Insulation resistance:1000m Min. Withstanding voltage:800v C/minute *Compliant with
More informationOur Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
More information0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC
Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables
More informationODU-MINI-SNAP. Series F - IP50 and IP68 FP-Locking Concept Keying with Halfshells. Series F
OU-MINI-SNAP Series - IP and IP68 P-Locking oncept Keying with Halfshells Series OU-MINI-SNAP Series The Push-Pull Locking Principle: P Locking roove onical Sleeve Locking ingers Outer Housing Back Nut
More information0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
0.3 or mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features
More informationTajimi Electronics Co
1108 series 1108 series connectors are built compact and the tight waterproofing mechanism allows the model to be at a depth 30 meters under water. This model is also ideal for application where units
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded
More informationVG95328 Qualified Bayonet-Lock Connectors
Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
80 Mighty Mouse Technical Reference Reference SRIPTION RQUIRMNT PROUR TRI ontact resistance S S39029 Table V Max Wire Test Voltage Size urrent rop 12 23 42 14 17 40 16 13 49 20 7.5 55 22 5 73 24 3 45 26
More information8N45S NC Series Non-safety classified connectors for EPR reactors
Description Quick-connect ¼ turn bayonet coupling mechanism Straight backshell with sealing gland and cable clamp Integrated 60 ground termination mechanism compliant with EPR reactors wiring specifications
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
More information