Commercial Body Fittings 8th Edition
|
|
- Amy Park
- 6 years ago
- Views:
Transcription
1 RIVTS & FSTRS Commercial ody Fittings 8th dition vex vex is a versatile breakstem fastener for use with a wide variety of material including metal, plastic and wood l Wide grip range l Fast installation from one side of the work piece l Good hole fill and positive stem retention l Installed with high speed, portable power tools with swivel and right-angled heads when access is difficult vex 1604 Series Countersunk Head 120 o luminium 2.5% agnesium lloy 5052 (plain finish) Stem: ow Carbon Steel (zinc coated) Range '' ia. '' ia. '' ia. '' ia. '' '' ox ox Q'ty min max min max min max min max max min max min 3.2 V1604/ V1604/ V1604/ V1604/ vex 1661 Series ow Profile Head luminium 2.5% agnesium lloy 5052 (plain finish) Stem: ow Carbon Steel (zinc coated) Range '' ia. '' ia. '' ia. '' ia. '' '' ox ox Q'ty min max min max min max min max max min max min 3.0 V1661/ V1661/ V1661/ V1661/ V1661/ V1661/ V1661/ V1661/ V1661/ V1661/ V1661/ Welwyn Garden City tel +44 (0) fax +44 (0)
2 Commercial ody Fittings 8th dition RIVTS & FSTRS vex 1641 Series arge Flange luminium 2.5% agnesium lloy 5052 (plain finish) Stem: ow Carbon Steel (zinc coated) Range '' ia. '' ia. '' '' ox Q'ty min max min max max max max V1641/ V1641/ V1641/ ox vinox 61 Series Stainless Steel reakstem ody: 304 Grade Stainless Steel (bright finish) Stem: 321 Grade Stainless Steel (plain finish) Range '' ia. '' ia. '' '' ia. '' '' ox Q'ty min max min max min max min max max ax min V61/ V61/ V61/ V61/ V61/ V61/ V61/ V61/ V61/ ox For a comprehensive range of riveting tools, see pages Welwyn Garden City tel +44 (0) fax +44 (0)
3 RIVTS & FSTRS Commercial ody Fittings 8th dition vtainers 2311 Series high quality fastener designed specifically for joining plywood or glass reinforced plastics to metal framing without damaging the materials or pulling through the composition. l Vibration and moisture resistant l Suitable for varying hole tolerances S T 2.16 max 4.19 max Pin & Shell: ow Carbon Steel (zinc plated) Seal: ylon (natural finish) ocking Slug: Polyester lastomer (natural finish) Shell 4.19 max vtainers & do not have shouldered pins. Under no circumstances should head of pin be placed directly against container board 10 Range '' 'S' 'T' ox Q'ty ox min max max min nom V2311/ / V2311/ / V2311/ V2311/ V2311/ V2311/ V2311/ V2311/ V2311/ V2311/ V2311/ V2311/ vtainers Shell ssembly (Includes ocking Slug) '' ia ox Q'ty ox 22.9mm dia. shell ( V ) must not be used directly against container board only against metal surfaces. V2321/ V2325/ Welwyn Garden City tel +44 (0) fax +44 (0)
4 Commercial ody Fittings 8th dition RIVTS & FSTRS ulbex F01 Series ulbex is an all aluminium corrosion resistant fastener. esigned for assemblies using soft, brittle and thin materials. uring installation the fastener collapses outwards forming three large tail segments. These spread the clamp load over a large surface area at the same time providing grip and strength. l For use with plastics, thin gauge materials, insulation fibreboard and fibreglass l Choice of coloured snap-on caps for matching finish a luminium lloy 5251 (natural finish) Stem: luminium lloy 5251 (natural finish ) 4.0 Range '' '' ia. '' '' '' ox Q'ty min max max min max min max max max VF01/ VF01/ VF01/ VF01/ VF01/ ox.t.r. Series high strength, all aluminium alloy fastener with a very large blind size area against the rear sheet. l Ideal for GRP & thin sheet materials l Water-resistant neoprene seal l a Seal luminium lloy (brightened finish) Stem: luminium lloy (natural finish) Range '' ia. '' ia. '' '' '' '' ox Q'ty min max max min max min max max max max ox VTR06W/ VTR06W/ VTR06W/ VTR06W/ VTR08W/ VTR08W/ Welwyn Garden City tel +44 (0) fax +44 (0)
5 RIVTS & FSTRS Commercial ody Fittings 8th dition T-ok 01 Series T-ok produces a positive, efficient and cost effective method of assembly l For applications involving joining metal to wood, GRP, plastics,rubber and glassfibre materials l High resistance to pull-out loads C V * V = etal face thickness ody: ow carbon steel (zinc plated & gold passivated) Stem: ow Carbon Steel (zinc plated) 4.3 '' ia. '' ia. 'C' '' ia. '' ia. 'V' '' '' ox min max min max min min max max min max min max min max V01/ V01/ V01/ V01/ ox S.R. Sealed Rivet SR01 Series Sealed and corrosion resistant locked stem fastener l ir and water resistant seal l Operates efficiently with oversize or elongated holes ody: luminium 5% agnesium lloy 5052 (natural finish) Stem: ow Carbon Steel (phosphated) Range '' ia. '' ia. '' min max min max min max min max 182 Welwyn Garden City tel +44 (0) fax +44 (0) '' ox VSR01/ VSR01/ VSR01/ VSR01/ VSR01/ VSR01/ VSR01/ ox VSR01/
6 Commercial ody Fittings 8th dition RIVTS & FSTRS vdelok high strength, vibration resistant bolt-type fastener l For applications demanding durable high quality assemblies l vailable with various adaptors and nose extensions l liminates problems associated with loose nuts, lock nuts, bolts and solid rivets l vdelok olts 2611 Series Pin: Carbon oron Steel (zinc plated finish) Collar: ow Carbon Steel (zinc plated) range shown is with a full collar. Use of half collar increases the grip range to that of the next longest pin. Range '' '' ox min max nom nom ox V2611/ Range '' '' ox min max nom nom ox V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ l vdelok olts 2612 Series 90⁰ Countersunk Head Type Pin: Carbon oron Steel (zinc plated) Collar: ow Carbon Steel (zinc plated) range shown is with a full collar. Use of half collar increases the grip range to that of the next longest pin. Range '' '' ox min max nom nom Welwyn Garden City tel +44 (0) fax +44 (0) ox V2612/ V2612/ V2612/ V2612/ V2612/ V2612/
7 RIVTS & FSTRS Commercial ody Fittings 8th dition vdelok Full Collars 2662 Series To Suit 2611 & 2612 Series S S ow Carbon Steel (zinc plated) H J 2611 H J 2612 '' '' '' 'H' 'J' '' 'S' ox min max min max max Rad max max max max V2662/ V2662/ V2662/ V2662/ vdelok Flange Collars 2615 Series To Suit 2611 & 2612 Series ox U S T T ow Carbon Steel (zinc plated) H P J 2611 H P J 2612 '' '' '' 'H' 'J' '' 'P' 'S' 'T' 'U' ox min max min max max Rad max max max max max max max V2615/ V2615/ V2615/ V2615/ ox IPORTT Zinc plating is only classed as a sacrificial coating (gives itself up to the corrosive media). protective barrier (i.e. paint) is recommended to protect against moisture. CF cannot be held responsible for the effects of corrosion on zinc plated parts. 184 Welwyn Garden City tel +44 (0) fax +44 (0)
8 Commercial ody Fittings 8th dition RIVTS & FSTRS axlok versatile fastener with an extensive grip range. Swaging of the collar into the locking grooves ensures a high quality fastening. Common grip and break grooves along the pin allow flush break-off during installation axlok olts 1901 Series razier Head R H Pin: edium Carbon, High anganese Steel Collar: ow Carbon Steel (zinc plated & passivated) C Range '' ia. '' '' ia. '' '' 'H' 'R' 'C' Ref ox min max min max ref min max max min max rad max max V1901/ V1901/ V1901/ V1901/ axlok olts 1902 Series 90 o Countersunk Head R ox F Pin: edium Carbon, High anganese Steel Collar: ow Carbon Steel (zinc plated & passivated) H Range '' ia. '' ia. '' 'H' '' ia. '' min max min max min max nom rad min max min max 'F' ox V1902/ V1902/ ox Commercial ody Fittings reserve the right to alter and amend product specifications without prior notice. ll specifications, weights and dimensions printed in this catalogue are intended as a guide only ny fixings therefore should not be determined until relevant goods are received on site. Welwyn Garden City tel +44 (0) fax +44 (0)
9 RIVTS & FSTRS Commercial ody Fittings 8th dition axlok olts 1903 Series ushroom Head R b a Pin: edium Carbon, High anganese Steel Collar: ow Carbon Steel (zinc plated & passivated) b h Range '' ia. 'b' '' Ref '' '' 'H' 'R' 'a' Ref ox min max min max Ref min max max min max rad max max V1903/ V1903/ V1903/ V1903/ ox P axlok Flanged Collars 1981 Series To Suit 1901, 1902, 1903, 1905 Series T S J 'J' '' 'P' Ref 'S' 'T' ox min max min max min max min max min max V1981/ V1981/ ox P1-16 P18-19 P P P P P91-93 P Welwyn Garden City tel +44 (0) fax +44 (0)
10 Commercial ody Fittings 8th dition RIVTS & FSTRS onobolt high performance flush break fastener designed to build-in strength, security, quality and cost saving benefits for the most demanding assembly requirements onobolt 2711 Series Protruding Head 2 1 imited Rear Clearance T o Rear Obstruction ody & Stem: ustenitic stainless steel modified by addition of 3%-4% copper T is the minimum clearance behind sheet to any obstruction is over uncrimped portion of body Range '' ia. '' '1' '2' '' '' 'T' ox min max min max min max min max max min max max min V2711/ V2711/ V2711/ V2711/ ox onobolt 2761 Series Countersunk Head 2 1 ody: Carbon Steel (zinc plated) Stem: Carbon Steel (zinc plated clear trivalent passivated) imited Rear Clearance T o Rear Obstruction T is the minimum clearance behind sheet to any obstruction is over uncrimped portion of body Range '' ia. '' '1' '2' '' '' 'T' ox min max min max min min max max min max max min 6.35 V2761/ ox Welwyn Garden City tel +44 (0) fax +44 (0)
11 RIVTS & FSTRS Commercial ody Fittings 8th dition onobolt 2771 Series Protruding Head 1 2 ody: Carbon Steel (zinc plated) Stem: Carbon Steel (zinc plated clear trivalent passivated) imited Rear Clearance T o Rear Obstruction T is the minimum clearance behind sheet to any obstruction is over un-crimped portion of body Range '' ia. '' '1' '2' '' '' 'T' ox ox min max min max min max min max max min max max min V2771/ V2771/ V2771/ V2771/ V2771/ Hemlok 2221 Series high performance fastener designed to meet the requirements of manufacturing industries using thin gauge back sheet materials in product assemblies. Provides high strength and good clamp-up without deforming thin sheet metal. The salient feature is the large load bearing tail formation ody: edium Carbon Steel Stem: Carbon oron Steel 6.35 Range '' ia. '' Ref '' '' '' '' ox ox min max min max min max min max max min max max V2221/ V2221/ V2221/ V2221/ V2221/ V2221/ Welwyn Garden City tel +44 (0) fax +44 (0)
12 Commercial ody Fittings 8th dition RIVTS & FSTRS GRIP-TIR The high strength GRIP-TIR system is designed to improve the assembly of commercial vehicle bodies. The GRIP-TIR is ideally suited for the plastic honeycomb panel, as the clamp force can be controlled, unlike break-loaded fasteners. They are removable, re-usable, sealed and come with a high grade plating specification. COOUR CO S OT UT C l Fully sealed l Controlled clamp l o expensive tooling required l o waste material l Re-usable l High speed placing l Colour coded seals l Can be supplied with plastic encapsulated heads l Robust plating l ow profile l Tamperproof OT Part umber & imensions range can be achieved by using the corresponding adjacent nut. i.e. GT1/ + GT1/ZP = min / max grip range C HSIV OCIG PTCH Technical Information: Recommended hole size: 10.3mm Thread: 5/16 UC Shear strength: 14n Tensile strength 20n Recommended assembly torque: 17-20n rive bit: T55 Corresponding UT Part umber & imensions Range min max C ox ox GT00/R GT0/WHT GT0/WHT GT0/WHT GT1/ GT1/ GT2/U GT2/U GT2/U GT3/Y GT3/Y GT3/Y GT4/R GT4/R GT4/R GT4/R GT5/GR GT5/GR GT5/GR Seal Colour C ox ox GT0/ZP GT0/ZP GT1/ZP GT2/ZP GT1/ZP GT2/ZP GT1/ZP GT2/ZP GT3/ZP GT1/ZP GT2/ZP GT3/ZP GT1/ZP GT2/ZP GT3/ZP GT4/ZP GT2/ZP GT3/ZP GT4/ZP Welwyn Garden City tel +44 (0) fax +44 (0)
13 RIVTS & FSTRS Commercial ody Fittings 8th dition ock olt ulti- high performance fastener designed to meet the requirements of manufacturing industries using thin gauge back sheet materials in product assemblies. Provides high strength and good clamp-up without deforming thin sheet metal. The salient feature is the large load bearing tail formation. o. RF/RS mm range: mm 10.50kg/1000 o. RF/RS mm range: mm 11.26kg/1000 l Truss head l Zinc / Clear passivate Collar to suit o. V2662/0800 vdelok full collar l See page 184 for further information ome Head Rivets ong -Range ost versatile type of head, it retains enough bearing surface to retain all kinds of materials (except those extremely smooth and brittle) ody: luminium l g 3,5 andrel: Steel Zinc plated d2 l Wide and extended grip range l Fast installation from one side of the work-piece l Good hole fill l Steel versions available to order d1 W d1 min Range max d2 mm mm W 0 mm nominal mm ox Quantity Weight per 1000 rill 0 mm FSTR0101/ FSTR0101/ FSTR0101/ FSTR0101/ FSTR0101/ FSTR0101/ FSTR0101/ FSTR0101/ FSTR0101/ FSTR0101/ FSTR0101/ FSTR0101/ FSTR0101/ FSTR0101/ FSTR0101/ FSTR0101/ Welwyn Garden City tel +44 (0) fax +44 (0)
Avex Series Countersunk Head. B Dia
RIVTS & FSTRS vex vex is a versatile breakstem fastener for use with a wide variety of material including metal, plastic and wood Wide grip range Fast installation from one side of the workpiece Good hole
More informationLOCKBOLTS Konnect 8M x 25MM Metric Tape Measure & RIVETS
LOCKBOLTS & RIVETS 116 Sign up today for Konnect s new online store KonnectShop Available 24 hours a day, 7 days a week Buy online at any time via the easy to use Shopping Cart facility Browse & choose
More information(E) WIDE BEARING ENCAPSULATED (M) MEDIUM BEARING ENCAPSULATED CLEARANCE SLEEVE MEDIUM BEARING SLEEVE WIDE BEARING SLEEVE
HUCK INTERACTIVE CD ROM : SPECIFICATION DRAWINGS C C 10.03 10.03 B B F E D F E D (E) WIDE BEARING ENCAPSULATED (M) MEDIUM BEARING ENCAPSULATED J J J K K K WIDE BEARING SLEEVE MEDIUM BEARING SLEEVE CLEARANCE
More informationCommercial Body Fittings 8th Edition. Door Hinge Raised Blade Zinc Plated & Stainless Steel. Door Hinge Raised Blade Zinc Plated & Stainless Steel
HINGES Commercial Body Fittings 8th Edition Door Hinge Raised Blade & No. HNVN731/SS wgt. 0.88kg l 30G Polished stainless steel No. HNVN731/ZP wgt. 0.88kg l mild steel Door Hinge Raised Blade & 22 85 105
More informationMarson Rivets, Rivet Nuts and Installation Tools
Marson Rivets, Rivet Nuts and Installation Tools Table of Contents Arconic Fastening Systems (AFS) offers the broadest line of blind fasteners in the industry. The breadth of the line is supported by the
More informationATLAS FM FULL METRIC INSERTS CATALOG
TLS F FULL ETRI INSERTS TLOG 915 TLS F FULL ETRI LIND THREDED INSERTS TLS F metric blind threaded inserts offer ideal solutions for blind attachment applications where only one side of a panel is accessible
More information16 - Swivels & Joining Links
16 - Swivels & Joining inks Quicklinks - Stainless Stainless "C" inks 316 grade stainless steel. n alternative to shackles or snaps allowing quick entry via a threaded hexagon locking nut. S 1 R S S..
More informationAvseal II Blind Sealing Plug
Avseal II Blind Sealing lug Since 1922 Since 1936 2010 Avseal II The new range of Avseal II blind sealing plugs is unique in the efficient sealing performance provided in low- and high-pressure hole sealing
More informationAvseal II. Blind Sealing Plug
Avseal II Blind Sealing Plug Avseal II The new range of Avseal II blind sealing plugs is unique in the efficient sealing performance provided in lowand high-pressure hole sealing applications. The rapidly
More informationHARRISON SILVERDALE LTD
FASTENERS FOR SHEET METAL Harrison Silverdale Harrison Silverdale has been supplying Industrial Fasteners since 1982. Over the years we have gained an enviable reputation for quality and reliability serving
More information341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
More informationSTEERING AND SUSPENSION section 2
STEERING AND SUSPENSION section TRRT-PC piece Track Rod Removal Tool Kit Quality, kit designed for easy removal and installation of ball joints on track rods. Knurled handle provides extra grip and three
More informationKD Fittings. Product range:
K Fittings Product range: ll-threads rackets rass Heads ams & olts ross owels Flush Mounts Inserts Insex Screws Maxi Luna Fittings Modeez Fasteners Panel onnectors Screws Stretcher Plates Tee Nuts Unita
More information10. Universal Clips. 254 Product overview 2013 We reserve the right to change designs and technical specifications of our products.
10. Universal lips Whether you need ceiling, wall or floor mounted clips, Flamco has the solution. We offer a wide range of universal mounting clips with a variety of closures, connections and finishes.
More informationLarge Flange - Provides greater bearing surface for fastening soft and brittle facing materials such as plywood and plastics including, vinyl, etc.
PANEL BLIND RIVETS PANEL BLIND RIVETS s: / IFI Grade 11 Steel Rivets: Plated Steel Rivet/Coated IFI Grade 30 Dome Head - Most popular for industrial applications. The low profile head diameter is twice
More informationPANEL FASTENERS AND HOLE PLUGS
NYLON MINI RIVETS Mini Rivets consist of a male and female component. Mini Rivets are used to fasten a variety of materials. Simply press together for fast, easy assembly. Male and female rivets are packaged
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More informationHARRISON SILVERDALE LTD
FASTENERS FOR PLASTIC Harrison Silverdale Harrison Silverdale has been supplying Industrial Fasteners since 1982. Over the years we have gained an enviable reputation for quality and reliability serving
More informationbrands you trust. ALOYCO Corrosion Resistant Stainless Steel Valves
brands you trust. LOYCO Corrosion Resistant Stainless Steel s Key Features and pplications Key Features and enefits Full material offering including CF8M, CF3M, and CN7M (lloy 20) road pressure classes
More informationDistributed by: Marson. Rivets, rivet nuts and installation tools
istributed by: Marson Rivets, rivet nuts and installation tools TM Table of Contents New marson head Introduction...2 General Information Blind Rivets...3 esign Information...4 Steel Rivets...5 Aluminum
More informationForged Steel Bolted & Welded Bonnet Gate Valves Sizes: 1/4 thru 3 Pressure Class: 150 thru 4500
Forged Steel olted & Welded onnet Gate Valves s: 1/4 thru 3 Pressure lass: 150 thru 4500 Manufactured by Newmans Rev: 052109 13 Typical Newco Forged Steel olted & Welded onnet Gate Valve Expanded View
More informationCOUPLERS 5. Fax: +44 (0)
COUPLERS Fax: +44 (0)1992 09890 3 COMPOSITE JAW COUPLERS (SERIES FS) L1 2.0 mm Max L2 2.0 mm Max L3 Bore B s 032-037 s 02-08 max features Low mass Freedom from corrosion Good damping properties Low cost
More informationDoor Hinge (Raised Blade) Zinc Plated or Stainless Steel. No. HNVN7314/ZP wgt. 0.88kg Zinc plated mild steel c/w 304G Stainless steel pin
HINGES Coercial Body Fittings Door Hinge (Raised Blade) or 22 5 No. HNVN731/ZP wgt. 0.88kg Zinc plated mild steel No. HNVN731/SS wgt. 0.88kg 30G Polished stainless steel 85 105 Ø10 pin Ø8.5 21 25 8 89
More informationPLASTI-GRIP* Terminals and Splices
PLASTI-GRIP* s and Splices Application Specification 114-2161 29 MAR 16 Rev G All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
More informationSPRING LOADED DEVICES
Spring Loaded Devices SPRING LOADED DE VICES Plungers: Plungers, Spring...38 39 Plungers, Spring, Metric... 40 41 Plungers, Shortie Spring... 42 Plungers, Shortie Spring Stainless Steel... 42 Plungers,
More informationGround Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB
lamps Waterpipe Ground lamps Waterpipe Ground lamps Waterpipe Ground lamps 2-T Ground Wire Size Water Pipe Size 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, #2 WG 4 2-1/2
More information2600/2700 Series. Determining the stud length number when using receptacle: Type 1 + 3* G = P + F. * For Type 3: G = 9,9 mm min.
Particular Features Max. tensile strength 1.330 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle designs. 2600 Series: Fillister head; 2700 Series:
More informationPUSH-PULL CLAMPS. Installation: When mounting clamps ensure that the mechanism clears the mounting bracket or fixture.
Features: With the exception of model P50, which is a light duty base mounted clamp, these push-pull clamps are mounted either directly into a threaded or plain hole in a fixture, or can be mounted in
More informationFlexible sided ladders
Flexible sided ladders Made in the UK for over 40 years What are flexible sided ladders... Please Note: Flexible sided ladders and their accessories are not Personal Protective Equipment. Flexible sided
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More information5F Series. Miniature Stud Assemblies and Receptacles
5F Series. Miniature Stud ssemblies and Receptacles Features: Minimum stud head projection. Wide range of head styles. Variety of materials. Stud available with either retaining ring or snap-in grommet
More informationCHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70
Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile
More informationbrands you trust. ALOYCO Corrosion Resistant Stainless Steel Valves Crane ChemPharma & Energy
brands you trust. LOYCO Corrosion Resistant Stainless Steel Valves Crane ChemPharma & Energy Key Features and pplications Key Features and enefits Full material offering including CF8M, CF3M, and CN7M
More informationH13.11 HANDLES H13 HORIZONTAL AND VERTICAL PIVOT WINDOWS
H13 HORIZONTL N VERTIL PIVOT WINOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - coercial@sobinco.com - www.sobinco.com ONTENTS 1. General information....03
More informationFIX-WHEEL RAILS. rationalisation, transportation, automation
FIX-WHEE RIS DBGM rationalisation, transportation, automation IN SOCK he following items can always be delivered immediately from stock: CCESSORIES broad range of standard accessories supplements and simplifies
More informationConnecting Rods External Thread
Power Transmission Connecting Rods External Thread Round Double End External Right Hand Threads Steel and Aluminum Coarse and Fine Threads ROD DIAMETER RIGHT HAND THREAD LENGTH OVERALL LENGTH RIGHT HAND
More informationHigh Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
More informationDoor thickness Max. 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06) Frame for top latching. R 0.5 (.02) Max. 8.6 (.34)
64 62 Compression Latch Small Lift & turn series Flush style Adjustable grip Low profile when latched Zinc alloy, powder coated or chrome plated and steel, zinc plated Max. static load: 220N (50 lbf) Compression
More informationPortable, lightweight vertical access Made in the UK for over 40 years
Flexible Sided Ladders Portable, lightweight vertical access Made in the UK for over 40 years Lyon Equipment flexible sided ladders Lyon Equipment is the leading manufacturer of flexible sided ladders.
More information/ CABLE TIES & WIRE FASTENERS /
Standard Self-locking Cable Ties information INFO Melting point: 265 C (509 F) Brittleness temperature: -112 C (-169 F) at 2% water Provide up to 50% more tensile strength and 15% larger bundle diameters
More informationCommercial Body Fittings 8th Edition
Commercial Body Fittings 8th Edition RETAINERS Retainer Heavy Duty 97 Retainer Heavy Duty 148 No. FRET180/HKZP wgt. 0.18kg l Suits No. FRET180/SMZP Plate: L76 x W45mm Hook: L97mm No. FRET190/HKZP wgt.
More informationDOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
More informationTITGEMEYER Tb1421GB(1115)1. TIFAS LockBolt Pin and collar fastening system
TITGEMEYER Tb1421GB(1115)1 TIFAS LockBolt Brazier head Steel, hardened (Type 5) EN 10263-4 zinc, passivate Nominal pin ø Hole ø Grip range Shear Tensile Clamp Part No. -0.2 s L1 max L2 max d1-0.2 d2* k
More informationApex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials.
pex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials. Responsive service for all your fastener tool needs. Made in the U.S.. since 1933. The
More informationE3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
More informationSection 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.
Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...
More informationBronze Gate Valves. SECTION 2a. Tel: +44 (0) Fax: +44 (0)
SETION 2a ronze Gate Valves Tel: +44 (0)1695 712800 Fax: +44 (0)1695 712820 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents ronze Gate Valves ontents Page Figure Number Index
More informationMarson Rivets, rivet nuts and installation tools
Marson Rivets, rivet nuts and installation tools Table of Contents New marson head Introduction...2 General Information Blind Rivets... esign Information...4 Steel Rivets...5 Aluminum Rivets...6 Aluminum/Steel
More informationSELF-SEALING FASTENERS
CATALOG SF300 SELF-SEALING FASTENERS & SELF- SEALING WASHERS Recognized WHEN JUST FASTENING ISN T ENOUGH When just fastening isn t enough. Pre-assembled O-Ring Seals in Geometric Groove Visit our website
More informationKEYSTONE SERIES GRF RESILIENT SEATED BUTTERFLY VALVES
KEYSTONE SERIES GRF RESIIENT SETE UTTERFY VVES heavy duty double flanged concentric design resilient seated butterfly valve FETURES GENER PPICTION These valves are for water or air service where a drop-tight
More informationB12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS
B12 TILT-TURN WINDOWS B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationDOOR MECHANISMS. Commercial Body Fittings 7th Edition
mm Unbushed Door Locking Mechanism Zinc Plated Comm Lock 27mm Bushed Door Locking Mechanism Galvanized Self-aligning snug fit Cam Cam Weld Recess Ø Handle Cover Bushed Bracket c/w plastic insert Bracket
More informationTWD-U Die cast body Urethane soft tread for hard floors 50mm (2 ) & 60mm. TWH & TWH-U Heavy duty nylon body Hard or urethane tread 75mm, 100mm, 125mm
Capacities to 175 lbs. High Style casters for use on seating, business machines, or institutional equipment. Meets or exceeds IFM durability standards. Hundreds of combinations of bodies, attachments,
More informationAlcoa Fastening Systems. Camloc Quick-Operating Fasteners
Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...
More information2: Ecokit Ecokit 11 Overview A 2_ Ecokit 11 Sub Rack Configuration A 2_ Width A 2_ Height / Depth A 2_6
2: Ecokit 11 2.1 Ecokit 11 Overview 2_3 2.2 Ecokit 11 Sub Rack Configuration 2_5 2.2.1 Width 2_5 2.2.2 Height / Depth 2_6 2.2.3 Handles 2_6 2.2.4 Line Drawing 2_7 2.3 daptation Kits 2_8 2.3.1 daptation
More informationSKF Power Transmission products
SK Power Transmission products 100 ouplings rid couplings................ 104 ear couplings................ 109 SK lex couplings............. 119 SK lex spacer coupling........ 121 hain couplings...............
More informationMILD STEEL CHAIN & FITTINGS
MILD TEEL CHAIN & ITTING CHAIN IDENTIICATION 84 PWB GADE L CHAIN 85-86 AMOGALV 86 PWB POO COIL CHAIN 87-88 PLIT LINK 89 PWB Anchor Chain identification Grade L Chain - Chain identification (6.00mm - 22.00mm)
More informationCollet Chucks and Collets
ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16
More informationRush and setup xstage S4
Rush and setup xstage S4 S4 is an ideal option for use during the biggest events, thanks to its unique adjustability from 1 m (39.37") up to 2.5 m (98.4") (floor height). Very large adjustability range,
More informationLift & turn series Flush style Adjustable grip. Door thickness Maximum 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06)
96 62 Compression Latch Lift & turn series Flush style Adjustable grip Low profile Easy grip adjustment Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 220N (50 lbf)
More informationT ~ \ u " NEW. Data sheet Enclosures. Klippon STB Stainless Steel Enclosures
ata sheet nclosures Klippon S Stainless Steel nclosures NW ~ \ u " For many decades the name Klippon has been synonymous for competence and quality in our proven supply of enclosures and customer solutions
More informationDesigner Casters Capacities to 175 lbs.
Capacities to 175 lbs. High Style casters for use on seating, business machines, or institutional equipment. Meets or exceeds IFM durability standards. Hundreds of combinations of bodies, attachments,
More informationSolenoid valve, Metal
Solenoid valve, etal Construction The 4/2 way compact indirectly controlled valve with aluminium body, piston slide valve and detachable coil encapsulated in plastic has got a T-ring piston slide valve
More informationProduct catalogue. Mechanical accessories for pumps and mixers
Product catalogue Mechanical accessories for pumps and mixers Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15
More informationFor the right ball valve
A or the right ball valve usinesses from food and beverage to pharmaceutical and cosmetics have trusted radford sanitary ball valves for many years. he reason: ixon anitary has the quality valves they
More informationLindapter Fixing. Product Guide BAPP. G r o u p o f C o m p a n i e s
Lindapter Fixing Product Guide Steelwork Fixings ype A Nose Recess ype A Malleable iron, bright zinc plated / hot dip galvanised Clamping Area K Skirt ail Steelwork clamp with recessed top to hold the
More informationDOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
More informationSERVICE CAMPAIGN SP JULY, 2007 SERVICE MANAGERS / PARTS MANAGERS HAULMAAX SUSPENSION PLATE UPGRADE EXPIRES: 31 DECEMBER 2007
ATTENTION: SUBJECT: SERVICE MANAGERS / PARTS MANAGERS HAULMAAX SUSPENSION PLATE UPGRADE EXPIRES: 31 DECEMBER 2007 Service Campaign Information This service campaign is a product modification that Autocar
More informationEasy Slide Rails ov -easy_slide_divider - U pdated
Easy Slide Rails ov-easy_slide_divider - Updated - 18-09-2017 163 Easy Slide Rails Easy Slide Rails Introduction The Easy Slide family of linear rails have a compact cross-section and low-friction movement.
More informationV Mesh Fencing DO NOT SCALE DRAWINGS firstfence.co.uk
0283 52 0283 480 522 sales@firstfence.co.uk firstfence.co.uk V Mesh encing MM X M PROIL NING PNLS OVRVIW 800MM HIGH V MSH NING 0MM HIGH V MSH NING 20MM HIGH V MSH NING MM HIGH V MSH NING O NOT SL RWINGS
More informationPULLERS & SEPARATORS
Workshop Solutions PULLERS & SEPARATORS INTRODUCTION Sykes-Pickavant has been at the forefront of providing specialist Workshop Solutions for Industry, for more than 75 years, and this latest catalogue
More informationCommercial Body Fittings 8th Edition. Underbody Access Step Galvanized 2-Rung, Heavy Duty. Frame: L595 x W350mm
STEPS Commercial Body Fittings 8th Edition No. ABUS871/BRGV wgt. 6.00kg No. ABUS876/BRGV wgt. 11.20kg Underbody Access Step with Platform 2-Rung, Heavy Duty Step: L600 x W285mm Frame: L815 x W340mm l Platform
More informationFrom a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling
ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers
More informationPull handles, tubular handles, recessed handles
, tubular handles, recessed handles 303 K0187 170 R25 55 14 M8 35 R12 140 32 82 R8 14 M8 57 uroplast PF 31, black. ushing brass or galvanized steel. igh-gloss polished. K0187.101 25 ssembly: From the rear.
More information26000 litre ISOTANK SPECIFICATION FOR HAZARDOUS CHEMICALS TRANSPORT AND STORAGE SPECIFICATION T11.
26000 litre ISOTANK SPECIFICATION FOR HAZARDOUS CHEMICALS TRANSPORT AND STORAGE SPECIFICATION T11. DESCRIPTION: 26 000 LITRE INSULATED UN PORTABLE TANK, TYPE T11 For transport of product classes 3, 4,
More informationShop Supplies. Shop Supplies. To order call: Fax:
1 Hose Reels Jack Stands Air Hose Reels - Heavy Duty Steel Frame Corrosion resistant powder coat finish. Features spring tension brake and solid brass swivel. Mounts on floor, wall or workbench. REEL CAPACITY
More informationAccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173
T- & GEN2 T- Durable and precise, holders provide a strong and rigid platform for the drilling of hydraulic ports. The holders precision ground insert location surfaces ensure total repeatability and simple,
More informationBreakstem Systems Since 1922 Since
Breakstem Systems Since 1922 Since 1936 2010 Intelligent Systems for versatile Fastening Joining components and diverse materials that vary in thickness and composition is a fundamental aspect of Avdel
More informationIndicator Lights (Neon, LED and Filament Lamp)
Indicator ights (Neon, ED and Filament amp) Colours and voltages: Neon Red, Amber, Green, Clear 100/130V (marked 110V), 200/250V (marked 230V) ED Red, Yellow, Green /2.2V Resistors for other voltages available
More informationSales & Marketing Director Trainor Communications. (815) (313)
For Immediate Release Photos Page 5-6 Media Contacts Bob DeVoe Tim Trainor Sales & Marketing Director Trainor Communications Avdel North America Public Relations (815) 455-5683 (313) 822-4000 bdevoe@acument.com
More informationP Series Puller 1000 and 2000 lb Capacity
P Series Puller 1000 and 2000 lb Capacity Features / Wire Puller: 4:1 design factor. Meets SM 30.21. Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. ll steel parts
More informationPneumatic Connectors, Tubing & Cylinder Control Accessories
Pneumatic Pneumatic onnectors, Tubing & ylinder ontrol ccessories 290 G-ca Index Page No Push-in Fittings Overview.3 -.7 Push-in Fittings.8 -.22 Push-in Fitting Dimensions.23 -.47 ylinder ontrol ccessories
More informationAir-Oil Systems, Inc. Gas Springs AGS 15 - AGS 28
Gas Springs GS 15 - GS 28 Gas Springs ontrols gas springs are reliable units designed to handle the demanding needs of the industrial and commercial markets. They are maintenance free and self-contained.
More information> clamping force up to kn. > operating pressure up to 500 bar. > piston with internal thread. > for push- and pull operation
Block CYLINDERS for VARIOUS DESIGN APPLICATIONS > clamping force up to 155.5 kn > operating pressure up to 500 bar > piston with internal thread > for push- and pull operation > with longitudinal and cross
More informationA.15 HANDLES FOR PERIMETER LOCKING SETS. Contents. Horizontal and vertical pivoting windows
.15 Horizontal and vertical pivoting windows HNLES FOR PERIMETER LOKING SETS ontents 1. General information.15.02 1.1. Handles series 501, 502 and 503.15.02 1.2. Handles series 5010, 5020 and 5030.15.02
More informationProducts Recommended for Steam Service
oss ouplings Products Recommended for Steam Service Quick isconnect ittings ~ actory nly Quick disconnect fittings (socket and plug) are available in solid brass with stainless steel springs and locking
More informationSpring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
More informationReverse Bayonet Coupling Connectors
Reverse ayonet oupling onnectors Series RoS ompliant onforming Standard -T-5015 Wa t e r p r o o f P67 P55 ock Type ayonet OUT series is a bayonet coupling connector which utilizes -T-5015 insert arrangements
More informationIP65 enclosures orion plus
IP65 enclosures orion plus One system for indoor and outdoor application Sheet steel or glass reinforced polyester - the orion plus enclosures are suited for harshest conditions and can be applied for
More information19 Swell Action Latch
150 19 Swell Action Latch Plastic ylon and glass-filled nylon black with rubber bushing Ø 2.4 (.09) Acorn nut M6 Thread 39 (1.53) Handle / tee shaft sub-assembly 1.5 (.059) 400 (90lbf) 2.5 (.098) 690 (155lbf)
More informationADMIRAL HYDRANT. clowvalve.com
clowvalve.com ADMIRAL HYDRANT AWWA C502 UL LISTED FM APPROVED NSF 61/372 CERTIFIED 250 PSI WORKING PRESSURE 350 PSI WORKING PRESSURE AVAILABLE 10-YEAR LIMITED WARRANTY Clow Valve, A Division of McWane,
More informationNUTS, WASHERS, SCREWS & STUDS WDS SECTION 8 - NUTS, WASHERS, SCREWS & STUDS
SECTION 8 - NUTS, WASHERS, SCREWS & STUDS NUTS, WASHERS, SCREWS Hexagon (Standard) Nuts M4-M2 Collar Nuts Spherical Seating Nuts Acorn Nuts Coupling Nuts Quick Action Nuts Standard Washers Heavy Duty Jig
More informationGRW/GRL Sizes NPS 2-36
KEYSTONE The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications. Features Wafer and lugged body design with face-toface dimension, according
More informationL Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationMinimally protruding jaw shank for greater capacity in tight spaces.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationCONTENTS OVERHEAD SLEEVES AND LUGS
CONTENTS OVERHEAD SLEEVES AND LUGS SECTION 5 SECTION 5 OVERHEAD CONDUCTOR SLEEVES & LUGS..................45 NON TENSION SLEEVES.......................................46 FULL TENSION SLEEVES TYPE A...............................46
More informationMETAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
More informationDesign and Construction
ublication 940-711 ontents esign & onstruction page 1 Technical Information page 2 lange ixing Units page 4 olt ixing Units page 6 ase ixing Units page 8 Tube ixing & lamp ixing Units page 11 lide Units
More informationGas Springs AGS 15 - AGS 28
Gas Springs GS 15 - GS 28 Gas Springs ontrols gas springs are reliable units designed to handle the demanding needs of the industrial and commercial markets. They are maintenance free and self-contained.
More informationK17.13 DOOR STAYS K17 DOORS
K17 DOORS K17.13 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Door stays n 684(C)-500...K17.13.03 1.1.
More information