Model B. Thermostatic Valves FEATURES APPLICATIONS FLOW RATES OF USGPM TAMPER-PROOF TEMPERATURE SETTINGS OF 55 F F
|
|
- Kerrie Anthony
- 6 years ago
- Views:
Transcription
1 Model Thermostatic Valves FETURES FLOW RTES OF USGPM TMPER-PROOF TEMPERTURE SETTINGS OF 55 F F OMPLETELY SELF-ONTINED POSITIVE 3-WY VLVE TION VILLE IN ST IRON, DUTILE IRON, RONZE, STEEL, ND STINLESS STEEL 1-1/2" - 6" PIPE SIZES: FLNGED, ND THREDED ONNETION PPLITIONS ENGINE & OMPRESSOR OOLING SYSTEM LUE OIL SYSTEMS OGENERTION HET REOVERY LOOPS PROESS ONTROL TEMPERTURE MIXING OR DIVERTING MOT Model Thermostatic Valves are fully automatic, 3- way fluid temperature control valves for diverting or mixing applications. They provide reliable control of fluid temperatures in engine jacket water and lubrication oil cooling systems. These valves are suitable for process control and industrial applications where fluids must be mixed or diverted depending on their temperatures. They may also be applied to cogeneration systems to control temperatures in the heat recovery loop assuring proper engine cooling and maximizing heat recovery. TMPER-PROOF s with other MOT thermostatic valve the Model utilizes fully enclosed, factory-set temperature element assemblies which provide tamper-proof operation. To change a valve setting it is necessary to exchange the temperature element assemblies inside the valve. HIGH RESISTNE TO SHOK Model thermostatic valves display excellent reliability even under extreme shocks or vibration and many models have been qualified to MIL-S-901 and MIL-V MNUL OVERRIDE If desired, MOT Model thermostatic valves can be supplied with a manual override which allows the user to direct flows through Ports and. On valves equipped with the manual override option, there is one manual override device for each of the temperature element assemblies. To engage the manual override function, flip the lever(s) 180 from "uto" to "Manual" position. FORM 936
2 OPERTION The valve is supplied with the temperature element assemblies factory-set to the nominal temperature setting. Temperature is sensed at Port which remains open to Port (bypass) until the fluid temperature reaches a point 5-10 F below the nominal setting. s the temperature continues to rise, the sliding valve moves to close off Port and open Port (connected to the cooler or heat exchanger) Port is fully closed 8-10 F above the nominal setting. The valve continually modulates the fluid flow to maintain the nominal temperature. For optimum control, the system should be sized so about 1/2 the total fluid flow is passing through the cooler at full load. For long life, MOT Model valves should not be exposed to continuous temperatures exceeding 25 F above their nominal temperature setting. For occasional short periods (1/2 hour or less), they can be exposed to temperatures of 50 F above their nominal temperature setting, but not to exceed 250 F maximum. For higher over-temperatures, reduced stroke element assemblies (5566X) are available. They will withstand continuous temperatures of 60 F above their nominal temperature setting but add 30% to the valve pressure drop. Reduced stroke elements are not available in all temperatures. INSTLLTION MOT thermostatic valves operate in any position and may be oriented at the convenience of the system designer. In the smaller sizes, the valve may be supported by the connecting pipe but should not be subjected to excessive bending. Line up the piping before tightening the connecting bolts. Larger sizes should not be used to support long and heavy lengths of pipe nor used to draw up lengths of pipe which have been fabricated too short. If the valve is mounted at the high point of the system, the system should be properly vented to prevent trapping air at the temperature element assemblies. For piping diagrams regarding specific applications, refer to Form 913, MOT Thermostatic Valves General Information. Figure 1 SELETION MOT thermostatic valves are selected by the anticipated flow rate through the valve. Refer to Fig. 1. Pressure drop across the valve is usually limited to approximately 2 psi to 7 psi to maintain good temperature regulation. Threaded end connections are available on 1 1/2 and 2 inch sizes. Models with cast iron, ductile iron, or bronze housings have NSI 125 lb flat fare flanges. Steel or Stainless Steel housings feature NSI lass 150 or 300 raised face flanges. Metric connections also available. Models with steel housings have NSI 150 lb/300 lb lass compatible raised face flanges. Versions available from US factory. ast Iron 1-1/2OT 1-1/2HT 2OT 2HT 2MF 2F 2FF 2-1/2OF 2-1/2MF 3OF 3MF 4EF 4OF 4MF 5OF 5MF 6OF 6MF Ductile Iron 2MDF 2FDF 2-1/2MDF 3ODF 4EDF 4ODF 4MDF 5ODF 5MDF 6ODF 6MDF Indicates Non-Standard PIPING DIGRMS ronze 1-1/2OT 2OT 2F 2FF 2-1/2MF 3OF 3MF 4EF 4OF 4MF 5OF 5MF 6OF 6MF MODELS O,, M Steel 2SJ 2SH 2MSJ 2MSH 2-1/2OSJ 2-1/2MSJ 3OSJ 3MSJ 3OSH FOR MIXING PPLITIONS FOR DIVERTING PPLITIONS Pressure Drop - Pounds Per Square Inch 1-1/ / Flow in U.S. Gallons Per Minute Recommended pressure drop is 2 to 7 psi. old Mixed Mixed Hot Hot Heat Exchanger Heat Source MODEL 1-1/2, 2, O, H, F Heat old Exchanger Heat Source y Pass y Pass
3 SPEIFITIONS Internal Trim Materials... ronze and Stainless Steel Standard Seal Material... una N Max. Pressure Drop cross Valve psi (1.4 ar) Valve Pressure Ratings at 250 F ast Iron, Ductile Iron, ronze psi (10 ar) ast Iron, Model H psi (23 ar) Steel, lass 150, psi (17 ar) Steel, lass 300, psi (46 ar) Stainless Steel lass 150, psi (15 ar) Stainless Steel lass 300, psi (41ar) Shipping Weights: ast Ductile Iron Iron ronze Steel 1-1/2O/2O /2H/2H /2M , M F / HOW TO ORDER (Refer to Model ode System elow.) When ordering please specify the following: 1. Valve size connection (see Table ). 2. Valve Type (see Table ). 3. Housing material (see Table ). 4. Type of End onnection (see Table D). 5. Nominal temperature setting (see Table E). 6. ny of the following special features if required: a) Viton or neoprene seals (instead of una N). b) Electroless Nickel plated temperature element assembly. c) Element leak hole (see Table G). d) Reduced stroke element assembly for high over-temperature. This product may be ordered using the full description as shown above or by constructing a Model No. using the Model ode System below. For special requirements, contact the MOT factory or your local representative. MODEL ODE SYSTEM 3 O F ( ) Special Requirements, (MTO) Made-To-Order Element ssembly Leak Hole, See Table G Element ssembly Type, See Table F Temperature Setting, See Table E TLE Valve Size Inches (mm) 1-1/2 (40) 2 (50) 2-1/2 (65) 3 (80) 4 (100) 5 (125) 6 (150) 8 (200) TLE E Temperature Setting ode Nominal Temp No. F ( ) * (13) (24) (32) (35) (38) (41) (43) (46) (49) * (54) (57) (60) (63) * (66) (69) TLE Valve Type ode No. O M F H R Standard Manual Override Tee config, Flanged 1-1/2, 2" only Flanged, 2" only 1-1/2, 2" only Manual override (UK) TLE ody Material ode No.Material S D R TLE E (ontinued) Temperature Setting ode Nominal Temp No. F ( ) (71) (74) (77) (79) (83) (85) (91) (96) (102) (107) (110) (113) (116) Temperatures apply only to 1096 and 2433 Element ssemblies. ast Iron Steel ronze Ductile Iron Stainless Steel ode No. ode No. F J H N P T V W TLE F Element TLE D* onnections End Type NSI 16.1 lass 125 FF Flange NSI 16.5 lass 150 RF Flange NSI lass 300 RF Flange ND6 (Metric) Flange ND10 (Metric) Flange ND16 (Metric) Flange Navy Flange JIS 5K FF Flange NPT Threaded SP-TR / JIS Threaded SE Threaded (straight thread, O-ring seal) ssembly Type TLE G Element ssembly Leak Hole ode Size No. Inches (mm) X Standard P Plated with Viton none (standard) X with Viton seals X Manual Override 1/2" (12.5) X Reduced stroke 1/4" (6.4) S Saltwater 3/8" (9.5) X with Neoprene D 1/8" (3.2) P with Neoprene E 1/16" (1.6) X with Viton F 3/32" (2.4) P Plated G 3/16" (4.8) X with Viton H 5/16" (7.9) K Electroless Nickel with Neoprene * = lso avail. as reduced stroke. ontact factory for other temps. Indicates Non-Standard, MTO
4 DIMENSIONS 8 O,, E, M F H, O(-)T Principal Flange Drilling Nominal Dimensions Width No. Dia. No. of Pipe in the of of olt Element Model No. Size "S" "W" "Z" Other Plane Holes Holes ircle ssemblies 1-1/2O(-)T 1-1/2 3-13/ /16 3-9/16 5-1/2 1 (40) (97) (246) (90) (140) 1-1/2HT 1-1/2 4-1/ / /4 1 (40) (103) (271) (102) (146) 2(-)F 2 4-7/16 8-7/8 5-7/ /4 4-3/4 1 2M(-)F (50) (113) (225) (149) (152) (19) (121) 2F(-)F 2 4-3/4 10-5/8 4-7/ /4 4-3/4 1 (50) (121) (270) (113) (152) (19) (121) 2SJ 2 4-7/16 8-7/8 5-7/ /4 4-3/4 1 2MSJ (50) (112) (225) (149) (152) (19) (121) 2SH 2 4-7/16 8-7/8 5-7/ / MSH (50) (112) (225) (149) (152) (19) (127) 2O(-)T / /16 3-9/16 5-1/2 1 (50) (97) (246) (90) (140) 2HT 2 4-1/ / /4 1 (50) (103) (271) (102) (146) 2-1/2O(-)F 2-1/ /2 8-1/4 4 3/4 5-1/ /2M(-)F (65) (127) (254) (165) (210) (19) (140) 2-1/2OSJ 2-1/ /2 8-1/4 4 3/4 5-1/ /2MSJ (65) (127) (254) (165) (210) (19) (140) 3O(-)F 3 5-1/4 10-1/2 6-3/4 8-1/4 4 3/ M(-)F (80) (133) (267) (172) (210) (19) (152) 3OSJ 3 5-1/4 10-1/2 6-3/4 8-1/4 4 3/ MSJ (80) (133) (267) (172) (210) (19) (152) 3OSH 3 5-1/4 10-1/2 6-3/4 8-1/4 8 3/4 6-5/8 2 3MSH (80) (133) (267) (172) (210) (19) (168) 4O(-)F / /8 8-9/ /8 8 3/4 7-1/2 4 4M(-)F (100) (201) (403) (218) (308) (19) (190) 5O(-)F 5 9-5/8 19-1/4 9-1/2 13-3/4 8 7/8 8-1/2 6 5M(-)F (125) (249) (489) (241) (349) (22) (216) 6O(-)F 6 9-5/8 19-1/ /8 9-1/2 9 6M(-)F (150) (244) (489) (254) (483) (22) (241) 8O(-)F / /16(500) 8 7/8 11-3/4 18 8R(-)F (200) (420) (840) (280) 26-3/4(680) (22) (298) Dimensions in inches. Millimeters in ( ).
5 Model F Model O, SERVIE PRTS FOR MODELS O,, F, H, M Ref Part No. No. Description L001 Seat, olted-in (Except M) L002 Seat (M only) Sleeve L050 apscrew Lockwasher Element O-ring, una N (Standard) L002 Element O-ring Seal, Viton X(temp) Element ssembly (Standard) P(temp) Element ssembly, plated X(temp) Element ssembly, manual override O-ring 1-1/2 3, una N 9 761L001 O-ring 1-1/2 3, Viton Gasket 2-1/2, 3, (Old Versions) Gasket Gasket Gasket O-ring, una N (M only) L001 O-ring, Viton (M only) This Parts List effective with Valve Serial No Model M MINTENNE Properly applied and installed, MOT Thermostatic Valves require practically no maintenance. If necessary, temperature element assemblies may be easily replaced. Remove Nuts (12) or olts (6) and separate the Upper (1) and Lower (2) Housing. Remove Element ssembly (8) and Element O-ring Seal (7). Remove Housing O-ring (9) or Gasket and clean any foreign material from sealing surfaces. Lubricate new Element O-ring Seal (7) with a good grade of petroleum grease and re-insert in the groove in Upper Housing (1). Insert Element ssembly (8) through Element O-ring Seal (7) with a twisting motion. Install Housing O-ring (9) or Gasket around the Element ssembly Flange and bolt on Lower Housing (2). MOT designs and tests all its products to ensure that high quality standards are met. For good product life, carefully follow MOT's installation and maintenance instruction; failure to do so could result in damage to the equipment being protected or controlled. When communicating with MOT regarding operation of a control, always give the Model No. and Serial No. If ordering service parts, also include description, part no., and quantity desired. If any parts are ordered by Reference No. only, please include the Form No., Revision No., and date of this brochure.
6 MOT US 8824 Fallbrook Dr Houston, TX Tel: Fax: MOT Western Way ury St. Edmunds IP33 3SZ Suffolk England Tel: Fax: MOT SINGPORE 10 Eunos Road 8 # Singapore Post entre Singapore Tel: Fax: Form
Thermostatic Control Valve
Thermostatic Control Valve Model J Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationModel J. Thermostatic Control Valves. Typical applications. Key benefits. Key features. Accreditations available
Thermostatic Control Valves Model J Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationModel E. Thermostatic Control Valves. Typical applications
Thermostatic Control Valves Model E Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationThermostatic Control Valve
Thermostatic Control Valve Model R Typical applications Refrigeration compressors Industrial compressors Turbines Engines Gear boxes High pressure applications Model R Key benefits No leak design --No
More informationModel H. Thermostatic Control Valves. Typical applications. Key benefits. Key features. Accreditations
Thermostatic Control Valves Model H Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationThermostatic Control Valve
Thermostatic Control Valve Model C Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More information3-Way Temperature Control Valve
12/06 3-Way Temperature Control Valve G Valve Typical applications Lubricating oil temperature control Jacket water cooling Charge air temperature control Central cooling Sea water cooling Key benefits
More informationThermostatic Control Valves
Thermostatic Control Valves Model H Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationModulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
More informationThermostatic Valve. Filterstat - Model FJA. Typical applications. Key features and benefits. Mixing Diverting
Thermostatic Valve Filterstat - Model FJ Typical applications Mixing Diverting Key features and benefits Direct filter connection Integral differential pressure switch Integral oil filter manifold Mount
More informationThermostatic Valve. Filterstat - Model FJA. Typical applications. Key features and benefits. Mixing Diverting
Thermostatic Valve Filterstat - Model FJA Typical applications Mixing Diverting Key features and benefits Direct filter connection Integral differential pressure switch Integral oil filter manifold Mount
More informationTemperature Sensors. How to Order Consult factory for pricing and lead time. Normally Open (Closed on temperature rise)
Temperature Sensors 0916 Normally Open (losed on temperature rise) ontact Rating 6 MPS T 120 V 4 MPS T 240 V Voltage 0.1 to 240 volts or 12 VD 8 MPS, 24 VD 4 MPS Pressure 1,000 PSI operating Material 303
More information2-Way Temperature Sensing Valves
2-Way Temperature Sensing Valves Models 2230 and 4430 Overview Model 2230/4430 is a normally-closed, 2-way valve which is opened by increasing temperature of engine cooling water, lubricating oil, high
More informationPilot Operated 2-Way Gas Valves
Pilot Operated 2-Way Gas Valves Model 2180ED - ductile iron Model 2180ES - cast steel Overview AMOT Model 2180 valves will shut off the fuel gas and vent the manifold when used on an internal combustion
More informationHeat Exchanger Accessories
TEMPERTURE CONTROL - SERIES 123W May be used directly to control small electric motors etc using SINGLE phase power supply to maximum of 6 amps. lso for low volt (12 or 24) DC power supplies to maximum
More informationMagHex Fan Controller
MagHex Fan ontroller 0916 ompact Programmable Temperature Sensor This combined sensor and controller is designed to mount directly to the heat exchanger. It provides accurate temperature control by cycling
More informationElectronic Temperature Control & Bulb Well Assembly (AC)
Electronic Temperature ontrol & ulb Well ssembly () 0916 86816 This is a line voltage single-stage electronic temperature control with singlepole, double-throw relay output and LED indication. It is designed
More informationFEATURES. 3 position models can be equipped with special 180 operators offering two 90 steps.
2" 8" (DN 50 200) OTTOM PORTED 3-WY FLNGED LL VLVES Jamesbury bottom ported 3-way ball valves provide a variety of flow paths not commonly found in other 3-way designs.the basic design is suitable for
More informationVB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
More informationFTV-S (Straight) & FTV-A (Angle Body) Tri-Service Valve
VLVES & ESSORIES FTV-S (Straight) & FTV- (ngle ody) SERVIE REOMMENDTIONS: The Model FTV-S & FTV- is primarily designed for installation in pump discharge piping where it functions as a spring loaded silent
More informationW94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection
Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2
More informationD I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO
NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -
More informationKTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
More informationResilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
More informationResilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
More informationValves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
More informationGTW 3-WAY CONTROL VALVE SIZES 1/2" 12" ANSI CLASS 125/250, 150/300
GTW ONTROL VLVE PPLITION DT Process control systems for food, pulp and paper, chemical, petrochemical & other industries HV systems Feed water and fuel system controls in boiler rooms Packaged systems
More information2010B. Available Materials Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
OVER EQUIPMENT VRE 0 / 00 Series PRESSURE N VUUM RELIEF VLVE The 0/00 protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation.
More informationVB-9313 Series. Application. Features. Applicable Literature
V-9313 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Three-Way Mixing s General Instructions pplication V-9313 series three-way mixing valves control hot or chilled water in heating or
More informationPressure and Temperature Switches
Pressure and Temperature Switches Model 4140 Typical applications Suitable for industrial and marine applications Providing protection and safety of: --Diesel engines --Compressors --Pumps --Transmissions
More informationModel 4418F. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve
High Pressure Control Valve Model 4418F Overview The 4418F has been designed specifically for use as an air start valve for diesel engines or as a fuel shut-off valve for gas turbine applications. Its
More informationIFC Series DR Retainerless Dual Disc Check Valves
IF Series DR Retainerless Dual Disc heck Valves 6 1 2 3 4 9 7 8 5 10 Design Features Retainerless design meets industry fugitive emissions control requirements. This design eliminates the potential leak
More information2-WAY AND 3-WAY MOTORIZED VALVES FOR STEAM, VACUUM AND HOT WATER APPLICATIONS
R O R P O R T I O N -WY ND 3-WY MOTORIZED VLVES FOR STEM, VUUM ND HOT WTER PPLITIONS VLVE ND TUTOR FETURES Valve Sizes range from ½ inch to 8 inches -Way and 3-Way Single Seated and -Way Double Seated
More informationVisibility & REliability Sight Flow Indicators & Sight Windows
Visibility & REliability Sight Flow Indicators & Sight Windows Featuring KSF SIHt Flow INDITORS Engineered Liquid Flow Solutions www.kenco-eng.com SIHT FLOW INDITORS KENO Engineering ompany offers a variety
More informationSection 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.
Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...
More informationModel 4418F. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve
High Pressure Control Valve Model 4418F Overview The 4418F has been designed specifically for use as an air start valve for diesel engines or as a fuel shut-off valve for gas turbine applications. Its
More information3-Way Temperature Control Valve
3-Way Temperature Control Valve Model G, Versions GEF, GPD and Accessories Typical applications For engines, turbines, gearboxes and heat exchangers: Charge air cooling Secondary cooling systems Fuel and
More informationV5013B,C,F Three-Way Mixing and Diverting Valves
V50,C,F Three-Way Mixing and Diverting Valves FETURES PRODUCT DT Mixing or diverting models. ronze body with threaded connections or cast iron body with flanged-end connections. Stainless steel stem and
More informationRaytherm Selection Guide
The ot Water Management Experts SM Raytherm Selection uide Specifications for ommercial tmospheric: ydronic eating oilers Water eaters Specifications and Dimensions The Raytherm Selection uide is a ready-reference
More informationSeries PV30. Split-Body Pinch Valve. CLA-VAL Copyright Cla-Val 2007 Printed in USA Specifications subject to change without notice.
OPERTION The la-val Series PV30 Pinch Valves provide a positive means to control flow of hard to handle, aggressive media such as slurries, sludges and dry solids.the standard, pure gum elastomer sleeve,
More informationSTEAM INJECTION HUMIDIFIER LIVESTEAM. Submittal Drawings
STEAM INJETION HUMIDIFIER LIVESTEAM Submittal Drawings Date: Job Name: ontractor: ontractor or Order No.: Engineer: Agent: Agent P.O. No.: Date Ordered: Date Required: U.S.A. 2207 90th St., Sturtevant,
More information3-Way Linked Globe Valve Assemblies with Linear Series Actuators
Linked Globe Valve ssemblies with Linear Series ctuators Note: hoose a valve assembly having a close-off pressure capability sufficient for the application. Not all valve body and actuator combinations
More informationSELECTION. Easily Selectable Easily Serviceable. Interchangeability as easy as 1-2-3
SELETION Terminal Unit Zone Valve 1 Select your valve body Female Thread Solder ouble Union 2 Select your cartridge type hoice of V Hot and hilled Water 50% Glycol Low Pressure Steam Pressure alanced Male
More informationVB-9213 Series. Application. Features. Applicable Literature
VB-9213 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Stem Down to Close Two-Way Valves General Instructions pplication VB-9213 series single seat, stem down to close, twoway valves control
More informationVB-9313 Series. Application. Features. Applicable Literature
V-9313 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Three-Way Mixing s General Instructions pplication V-9313 series three-way mixing valves control hot or chilled water in heating or
More informationElectro Controls. Valves / Linkages WattsIndustries.co.uk
Electro Controls Valves / Linkages - 07 WattsIndustries.co.uk valves / linkages Section MOUNTING INSTRUCTIONS FOR LINKGES EE.. M K / EE..ES / EE..RD EE..MK UTO MNUL UTO MNUL UTO MNUL. Push the valve spindle
More informationSelf-Acting Temperature Control Valve
GLOE & NEELE Northeast ontrols Inc. Tel: 8454183435 Fax: 8455952471 www.dwyerstore.com Selfcting Temperature ontrol Valve Require No External Power Selfcting Temperature ontrol Valves require no external
More informationSV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
More informationSTEAM TRAPS. Float and Thermostatic Steam Traps (continued) Series C and X. Dimensions in. (mm)
STM TRPS loat and Thermostatic (continued) Series and X or large high capacity units s available: Series : 1 1 /4" NPT and SPT 1 1 /2" NPT and SPT 2" NPT and SPT 2 1 /2" NPT Series X: 2" NPT Resistant
More informationVALVULAS. Modelo 215V, 337 Sección VIII, Vacío De Asme Aire/Gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV'
VLVULS Modelo 215V, 337 Sección VIII, Vacío De sme ire/gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV' Descripciones Modelo Model 337: Tiene dispositivo para la elevación 'tirar-anillo'
More informationSuperior Quality And Delivery At A Great Price.
Thermostatic Control Valves From Fluid Power Energy: Superior Quality And Delivery At A Great Price. Fluid Power Energy (FPE), an ISO 9001-2000 Certified Company, was established in 1975 with one goal
More informationMetal Particle Detector
Metal Particle Detector Model MPD Stainless steel Overview The Metal Particle Detector switch from AMOT can detect and alert equipment operations of the presence of metal particles in non-conductive fluid
More informationELECTRIC ACTUATORS 400 N
ELECTRIC CTUTORS 400 N SE4 PPLICTION Electric actuator SE4 is suitable to drive valve body series in HVC systems. Two action types are available: - floating (3-point) - modulating Vdc and m. ctuator is
More informationAloyco. Corrosion Resistant Valves. The First Name In Corrosion Resistant Valves
loyco Corrosion Resistant s The First Name In Corrosion Resistant s Stainless Steel s General Index Figure No. Type Pressure Class End Connection Material vailable Size Range Catalog Page 0 Gate, RS 00
More informationCONTROL VALVES W910 Series
ONTROL ompact ontrol Valve Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel ompany Models W910, W910, W910, W910T, W910EP,
More informationRS Series. Three way rotary valves for temperature control systems
RS Series Three way rotary valves for temperature control systems R S RS Three way rotary valve for temperature control systems RS 3-way rotary valve for temperature control systems High Efficiency Mixing
More informationElectronic Globe Valve Guide Specifications
Electronic Globe Valve Guide Specifications Two and Three-Way Screwed Valves Valves 1/2" through 2" shall be bronze body, NPT screw type, and shall be rated for NSI Class 250 working pressure. The operating
More informationFluid Cooling Shell & Tube B / SB Series
Fluid ooling Shell & Tube / S Series 0916 erformance Notes Young Touchstone thermal interchange ompetitively priced 1/4" or 3/8" tubes available Water to water applications Sea water applications, O-Ring,
More informationApplications. T98H Part Matrix. Specifications. Spring Range. Materials of Construction. T98H Regulator Rebuild Kits. marshbellofram.
TH Back Regulator / Valve The TH monitors upstream pressure and opens to relieve excess pressure increases above setpoint. s a Back Regulator, the upstream pressure is monitored and released downstream
More informationThe Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York Bulletin 617 Rev. C
ulletin 617 Rev. Model R ommercial Riser Riser Manifold for ommercial pplications ulletin 617 Rev. vailable Sizes/Pressure Ratings: 1 1 / 2 (40mm) and 2 (50mm) Threaded - 250 psi (17,2 bar) Working Pressure
More informationBase mounted pumps - INGE AND PUMP
ase mounted pumps - INE ND PUMP Type T E FETURES PROVIDE ENEFITS ack Pull-out Construction Easy removal of rotating assembly without disturbing casing and piping t Simplified rotor repair, minimized maintenance
More informationG765, 3-Way, Mixing Flanged Globe Valve
G765, 3-Way, Mixing langed Globe Valve pplication This valve is typically used in large ir Handling Units (HU) on heating or cooling coils. This valve is suitable for use in a hydronic system with variable
More informationSeries 36-WW COMBINATION AIR VALVES DATA AND SIZING WASTEWATER SERVICE. (Single Body Style) Installation. Specifications. Purchase Specification
Series -WW COMINTION IR S DT ND SIZING WSTEWTER SERVICE (Single ody Style) Stainless Steel T Trim Standard Stainless Steel Floats Guaranteed Fully Ported s - No Restrictions Engineered For Drip Tight Seal
More informationSmith Meter Truck Meter Packages Specifications
Issue/Rev. 0.4 (8/12) P Meter Smith Meter Truck Meter Packages Specifications ulletin SS01095 TP (Ticket Printer) LN (Large Numeral ounter) Preset ounter Air Eliminator/ Strainer Faucet P Meter Smith Meter
More informationquick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data
HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM
More information2-Way and 3-Way Globe Valve Assemblies. Two-Way Pneumatic Spring Return Models
2-Way and 3-Way lobe Valve ssemblies Note: hoose a valve assembly with a maximum operating differential pressure apability suffiient for the appliation. onsult Table-1 on page 5 for lose-off pressure ratings.
More informationPneumatic Indicating Relay
Pneumatic Indicating Relay Model 2400D Overview The AMOT Model 2400D Pneumatic Indicating Relay pinpoints trouble and instantly provides easily visible trip indication. The first-out indication is held
More informationW91/W94 Series TEMPERATURE REGULATORS. Self-Operated Temperature Regulators. Design & Operation W91 Non-Indicating W94 Dial Thermometer
Design & Operation W91 Non-Indicating W94 Dial Thermometer Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company CAPILLARY
More informationSection 8. Copper Series
Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for
More informationPRESSURE INDEPENDENT CONTROL VALVE
PRESSURE INEPENENT ONTROL VLVE T2873.1_00 EN pril 2015 PROUTION RNGE Version without pressure plugs Version with pressure plugs Size P - Pa flow rate - m 3 /h artridge colour 2873.04.50 1/2" 16 200 0,037
More informationHow efficient is your temperature control?
How efficient is your temperature control? Prime movers need reliable temperature control to enable fast warm up, accurate control and efficient operation, minimising emissions and maximising output Thermostatic
More informationINSTALLATION INSTRUCTIONS FOR PART APPLICATIONS. Mazda
INSTLLTION INSTRUTIONS FOR PRT 99-7504 99-7504 KIT FETURES DIN Mount Radio Provision with Pocket ISO Mount Radio Provision with Pocket onus Display Replacement Pocket Retains Factory Display For utomatic
More informationG7100S, 3-Way, Mixing Flanged Globe Valve
pplication This valve is typically used in large ir Handling Units (HU) on heating or cooling coils. This valve is suitable for use in a hydronic system with variable flow. Suitable ctuators Non-Spring
More informationSelection Guide. Vx-7000 & Vx-9000 Series Mx4x-6xxx & Mx4x-7xxx Series. Globe Valve Assemblies. Actuator/Linkage Assemblies
Vx-7000 & Vx-9000 Series Mxx-6xxx & Mxx-7xxx Series Selection Guide Linked Globe Valve ssemblies ctuator/linkage ssemblies with DuraDrive ctuators Globe Valve ssemblies The V, VF, and VS-7000 and -9000
More informationHousings and Miscellaneous Parts
Housings and Miscellaneous Parts Standard and Special Valve Housings, Orifice Disks, Orifice Sizing harts, Pilot Pistons, dapters, djustment Kits and Seal Kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1
More informationOptimise your temperature control
Optimise your temperature control Fast response, low pressure drop valves for tighter temperature control 3-Way Temperature Control Valve - Model G Overview Introducing the Model G 3-Way Temperature Control
More informationMINIMATIC COMPACT - COMPETITIVE - FLOW CONTROL NORTHVALE KORTING LTD
MINIMTI OMPT - OMPETITIVE - FLOW ONTROL NORTHVLE KORTING LT MINIMTI ontrol Valves range of compact, lightweight, low cost control valves for use on liquid steam or gas applications. vailable in 2 way and
More informationBronze Gate Valves. SECTION 2a. Tel: +44 (0) Fax: +44 (0)
SETION 2a ronze Gate Valves Tel: +44 (0)1695 712800 Fax: +44 (0)1695 712820 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents ronze Gate Valves ontents Page Figure Number Index
More informationDimensions / Technical Data / Order Codes
Fluid Level / Temperature Indicators / / rder odes Level Gauge SN D Design of Scale Plates Thermometer ptions apillary Tube Thermometer with a dual elsius / Fahrenheit scale up to +80 / +80 F L3 YUR LG
More informationTubing, Fittings and Air Handling System Components
Tubing, Fittings and ir Handling System omponents INDEX Tubing 5 METLLI TUING ND FITTINGS FOR IR HNDLING SYSTEMS Standard fittings Special fittings Vacuum system inlet valves Special fabrication services
More informationStandard Product Range
Standard Product Range Standard Pressure onnection Nominal size inch Product code mm ASME 150/200 psi Wafer Lugged 1 150/200 DJ 1 150/200 DJL Standard Product Range EN PN10 PN16 PN25 Wafer Lugged Wafer
More informationVG2000 Series Cast Iron Flanged Globe Valves
Installation Instructions VG2000 Issue ate November 15, 2002 VG2000 Series ast Iron Flanged Globe Valves pplication VG2000 Series ast Iron Flanged Globe Valves are primarily designed to regulate the flow
More informationBC SERIES CHECK VALVE
SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG
More informationModel ZW204 Non-Modulating Float Valve
Model Z04 Non-Modulating loat Valve pplication The Zurn ilkins Model Z04 Non-Modulating loat Operated ontrol Valve is designed to be either fully open or fully closed in response to the position of the
More informationOptional Features and Accessories
Optional Features and ccessories Million Cycle Valves Vacuum Research Valves have been designed to eliminate sliding friction to extend operating life and reduce particle generation. For example, all of
More informationG765, 3-Way, Mixing Flanged Globe Valve
pplication This valve is typically used in large ir Handling Units (HU) on heating or cooling coils. This valve is suitable for use in a hydronic system with variable flow. Suitable ctuators Non-Spring
More informationAIR/VACUUM VALVE AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION
AIR/VACUUM AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION Scope. This specification is intended to cover the design, manufacture, and testing of / in. (3 mm) through 0 in. (00 mm) Air/Vacuum Valves suitable
More informationPiston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
More informationMILLCENTRIC B ALANCING PLUG VALVE
ISO 9001 ertified MILLNTI LNING PLUG VLV alancing Service egulation of multi-circuit chilled water and hot water systems is essential to achieve design performance. MILLNTI valves have excellent throttling
More information* Optional PRESSURE COMPENSATOR - FLANGED TYPE B A X 2.2. Typical application VR5P with flow control valve
* Veljan 3 ports pressure compensator Valve are designed for improved operation safety and reduced mountg cost. These valves are used to mata a constant pressure drop External PD, External PP Internal
More informationAir and Vacuum Sewer Valves. Stainless Steel Trim Standard. Short Air & Vacuum Sewer Series
ir and Vacuum Sewer Valves ir and Vacuum Sewer Valves Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable
More informationIntake Air Shut-off Valve
Intake Air Shut-off Valve Model 4261M Overview Diesel run-away is a potential problem that can cause damage to equipment. A diesel engine can run away and self destruct on hydrocarbon vapors, even if the
More informationRPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
More informationThree Way Control Valves
No. SS2-HDT110-0100 Three Way Control Valves Model HDT OVERVIEW The valve model HDT is a three-way control valve for diverting service. It has a small-sized, high-output diaphragm motor which is suitable
More informationHV gate valve with protective ring Series 17
HV gate valve with protective ring Series 17 Main applications Isolation valve for contaminating processes Ordering information Series 17., Valve with manual actuator turning handle Ordering numbers ISO-F
More informationSelf-Operating Temperature Regulators
Self-Operating Temperature Regulators Remote Bulb for Heating, Cooling, Mixing and By-Pass Applications Powers # Regulators With Powers # Self-Operating Temperature Regulators, you no longer need external
More informationWater Wastewater Air Valves Check Valves
Water Wastewater ir s Check s Water ir s ir Release ir and Vacuum Combination Vacuum reaker Check s Silent Check Swing Check Two-Door Check Foot Flex Check Wastewater & Sewage ir s ir Release ir and Vacuum
More informationwith the specific application. Always read and understand the installation
Worldwide Contacts www.tyco-fire.com Resilient-Seated Gate Valves Outside Screw and Yoke General Description TYCO Resilient-Seated Gate Valves are used in Fire Protection Systems for on/off operation.
More informationbrands you trust. ALOYCO Corrosion Resistant Stainless Steel Valves
brands you trust. LOYCO Corrosion Resistant Stainless Steel s Key Features and pplications Key Features and enefits Full material offering including CF8M, CF3M, and CN7M (lloy 20) road pressure classes
More informationDimensions and Weights
Sizing & Selection 2 Dimensions and Weights This section provides typical dimensions for Valtek's basic line of control valves. This dimensional information is for estimating only and is not certified
More information