SNAP-TOP STANDOFFS BULLETIN SSA 708 R E V. 409

S ELF-CLINCHING S TANDOFFS. Revised 409 SO-1. PennEngineering

S EF-INING S TANDOFFS Revised 409 SO-1 SEF-INING STANDOFFS These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted

SELF-CLINCHING STANDOFFS BULLETIN

BUETIN SO 213 R e v 414 PEM self-clinching standoffs, which use the proven self-clinching design, provide ideal solutions for applications where mounting, spacing or stacking of panels, boards or components

S ELF-CLINCHING S TANDOFFS

S EF-INING S TANOFFS SEF-INING STANOFFS These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted in the thin

NC Self-Clinching Nuts

NC Self-Clinching Nuts Features Provide load-bearing threads in thin sheets. vailable in a broad selection of inch and metric thread sizes. Self-clinching design provides quick and permanent installation

CONCEALED-HEAD SELF-CLINCHING STUDS AND STANDOFFS BULLETIN

ONEED-HED SE-INHING STUDS ND STNDOS BUETIN H 813 R e v 814 ONEED-HED SE-INHING STUDS ND STNDOS PEM self-clinching concealed-head studs and standoffs install permanently in steel or aluminum sheets as thin

SELF-CLINCHING STUDS AND PINS

SELF-LINING STUDS AND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the

S E L F - C L I N C H I N G S T U D S A N D P I N S

S E L F - L I N I N G S T U D S A N D P I N S SELF-LINING STUDS AND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard

Flush Head Self Clinching Studs

SB Flush Head Self Clinching Studs Features Provide permanent male threads in sheets as thin as.040 (1.00mm). Ribbed self-clinching design mounts flush on the back of the sheet while transferring excellent

Self-Clinching Standoffs Series CFSO, CFSOS, CFSOA (Through Threads)

self-clinching standoffs are designed for quick, easy installation with any standard pneumatic, hydraulic or mechanical press. -threaded standoffs are used in metal panels with thickness of.040 in. (1.0

SELF-CLINCHING STANDOFFS

SEF-INING STANOFFS Page 1 of 7 These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted in the thin sheet. PEM

PERFORMANCE DATA. Type FH and FHS Flush-Head Studs

PERFORMANCE DATA The pushout, torque-out, and pull thru values reported here pertain only to the holding power of the stud to the sheet into which it is installed. These values in no way pertain to the

Axial Strength and Mating Screw Recommended Tightening Torque for PEM Brand Self-clinching Nuts

Brand S Nuts - Unified S-256-0ZI 665 180 2.6 2.9 4.1 5.8 7.3 S-256-1ZI 665 180 2.7 3.1 4.4 6.2 7.7 S-256-2ZI 665 180 2.7 3.1 4.4 6.2 7.7 S-348-0ZI 800 180 3.8 4.3 6.1 8.6 11 S-348-1ZI 875 180 4.1 4.7 6.6

NA/NAL. Self Clinching Floating Nuts. NA /NAL Self Clinching Floating Nuts

/L Self linching Floating uts Features Internal floating nut feature allows up to.030 (0.76mm) lateral adjustment to compensate for misalignment with mating fastener. Permanent installation in aluminum,

SHEET METAL FASTENERS

SHT MTAL FASTNRS Wherever you are... we have the solution! The P-FH / P-FHS SLF is a threaded fastener which incorporates a knurled platform under the head, which when embedded in the sheet, displaces

Specifications are subject to change without notice. Not responsible for errors or omissions. Self-Clinching Fasteners

Specifications are subject to change without notice. Not responsible for errors or omissions. Self-Clinching Fasteners Table of Contents 2011 CPTIVE FSTENER SERIES ESCRIPTION PGE bout the Company / Product

Axial Strength and Mating Screw Recommended Tightening Torque for PEM Brand Self-clinching Nuts

Brand S Nuts - Metric Mating Screw Recommended Tightening Torque, (N m) S-M2-0ZI 2.53 1220 0.15 0.19 0.28 0.40 0.45 0.59 0.68 S-M2-1ZI 2.53 1220 0.15 0.19 0.28 0.40 0.45 0.59 0.68 S-M2-2ZI 2.53 1220 0.15

AUTOMATIC TOOLING GUIDE FOR PEMSERTER SERIES 4 AUTOMATIC FEED PRESS

Page 1 of 9 This tooling guide references the automatic tooling available for the Series 4AF Press Nut Tooling for S & CLS S, CLS PEM Self-Clinching Nuts Unified and Metric Combined Size -0,-1,-2 Color

SHEET METAL FASTENERS

SHEET METAL FASTENERS The fasteners shown below feature attachment by mechanical means avoiding the damage and uncertainty often associated with weld nuts and studs allowing their use in pre-finished materials.

HARRISON SILVERDALE LTD

FASTENERS FOR SHEET METAL Harrison Silverdale Harrison Silverdale has been supplying Industrial Fasteners since 1982. Over the years we have gained an enviable reputation for quality and reliability serving

SI THREADED INSERTS FOR PLASTICS BULLETIN

SI THRDD INSRTS FOR PLSTIS BULLTIN SI 410 SI THRDD INSRTS FOR PLSTIS SI inserts are typically specified in applications where strong, durable metal threads are required in plastic material, especially

ATLAS FM FULL METRIC INSERTS CATALOG

TLS F FULL ETRI INSERTS TLOG 915 TLS F FULL ETRI LIND THREDED INSERTS TLS F metric blind threaded inserts offer ideal solutions for blind attachment applications where only one side of a panel is accessible

> Continuous > Butt > Specialty

> Continuous > Butt > Specialty CONTENTS 6 Hinge Nomenclature 8 Continuous Hinges 14 316 STS Hinges 14 Electrogalvanized Hinges 14 Raw Brass 14 Polished Stainless w/holes 15 Preplated Steel w/holes 15

P.F. Hexagon Head Bolts/Screws

Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel

THREADED INSERTS FOR PLASTICS

Bulletin SI-1017 Rev 918 SI brand inserts employ press-in, molded-in, or heat/ultrasonic installation methods to provide strong, reusable, permanent threads in plastic. SI THRDD INSRTS FOR PLSTIS SI inserts

are widely used because they provide a standardized surface for testing.

Steel Panels Steel panels are made from standard low-carbon, cold-rolled steel complying with ASTM A1008, A-109 and QQS- 698. Smooth Finish Steel Panels, Type QD have a smooth, bright finish produced at

OPERATION AND MAINTENANCE MANUAL PNEUMATIC PRESS SERIAL NUMBER RAM CAP

OPERATION AND MAINTENANCE MANUAL FOR PEMSERTER SERIES 4 - MODEL J PNEUMATIC PRESS SERIAL NUMBER RAM CAP NOTE: Your New PEMSERTER Series 4 Pneumatic Press has been assigned a Serial Number as indicated

Technical features overview

Technical features overview Reference Product name Extraction Size Material Stroke direction Snap Locking* 5 Damping Max. load capacity per pair [N] Product category Product Section Steel X* 4 A B BM EG

4002 Series. Determing the stud length number when using receptacle: Type Type 3. G = P + F (8,9 min.) Release January 2009 G-1

Particular Features Max. tensile strength.00 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle design. Floating receptacles available. Selection Instructions

Lift & turn series Flush style Adjustable grip. Door thickness Maximum 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06)

96 62 Compression Latch Lift & turn series Flush style Adjustable grip Low profile Easy grip adjustment Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 220N (50 lbf)

Door thickness Max. 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06) Frame for top latching. R 0.5 (.02) Max. 8.6 (.34)

64 62 Compression Latch Small Lift & turn series Flush style Adjustable grip Low profile when latched Zinc alloy, powder coated or chrome plated and steel, zinc plated Max. static load: 220N (50 lbf) Compression

D8 DZUS PANEX Quarter-Turn Fasteners

392 DZUS ANEX Quarter-Turn Fasteners Studs Size 4 Studs: Steel, zinc plated plus chromate or chrome plated Bail cover: ABS, black H Head Styles - Tool Actuated Oval Slot Hex Recess hillips Recess 1.3 (.051)

Series 801 Mighty Mouse Double-Start ACME Thread Receptacle

ouble-start ACME Thread Receptacle 801-009 and 801-010 Ordering Information Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02/12/22 In-Line Style 01 How To Order Sample Part Number 801-010

A Series 1-4 Pole Rotary Switches

1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small

LG G5 Mobile Device. PennEngineering

LG G5 Mobile Device May 19 th, 2016 by Jennifer Lake PennEngineering 1 LG G5 2 Details & Findings Pictures and Description of the LG G5 and our disassembly process. 3 Removal of Sim Card Tray The SIM/microSD

Your Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual

Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...

Please ask your local representative for your individual front panel design. You find your contact person on our home-page

Front Panels In addition to the wide range of standard front panels we also provide on request individual customer specific custom front panels with punching, surface finish and silk screening. Textured

TPC TYPE N21 FEATURES. [Conformable standards] UL1059(2004) File No.E82309 EN Certificate No.B Ground terminal block

Ground terminal block TPC TYPE FEATURES The TPC terminal block provides electrical continuity with the mounting rail (TUB) simply by wiring. Common grounding is ensured by connecting a ground wire to a

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting

ANT. Materials. Features. Miniature Toggle

Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical

The HMC-Lite Construction Guide

The HMC-Lite Construction Guide The Heavy Metal-Lite Chassis is constructed using two identical drive modules. The drive modules are constructed using 3 mechanical sub-assemblies. The drive modules are

style vision & miscellaneous miscellaneous section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS

miscellaneous vision & style miscellaneous INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 311 miscellaneous No. 16377 No. 16858 Carb

AMPLIMITE Cable Connector Accessories

MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address

KOENIG-expander CV PLUGS THE WORLD S LEADING SEALING SYSTEM

KOENIG-expander CV PLUGS THE WORLD S LEADING SEALING SYSTEM 2011 JOINED TO LAST. Table of Contents CV 143 - English Anodized Aluminum Sleeve, Stainless Steel Ball CV 163 - English Allodined Aluminum Sleeve,

Polyline Polycarbonate Enclosures

TM Polyline Polycarbonate Enclosures Authorized Distributor: From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications WESCHLER INSTRUMENTS 800-903-9870

Ford Fabricated Steel Products

Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas

Surface Mount Terminal Blocks. 950-D-SMD-DS 5.00 mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 950-D-SMD-DS

page 1/5 Surface Mount Terminal Blocks 950-D-SMD-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-D-SMD-DS TECHNICAL INFORMATION Description 5 mm spacing, surface mount adapted terminal block for

MIRROR, GLASS AND PANEL TRIM

... MIRROR, GLASS AND PANEL TRIM RIGHT SHAPES RIGHT PRICE RIGHT NOW J CAP ALUMINUM CAP FOR 1/16" MATERIAL FR 0230, BC ALUMINUM CAP FOR 3/32" MATERIAL FR 0330, BC ALUMINUM CAP FOR 5/32" MATERIAL FR 0430,

FAN ACCESSORIES Filters. Fan Guards. Fan Mounting Accessories

FAN ACCESSORIES Fan accessories provide protection and mounting for small DC and AC fans. Suitable for industrial and computing applications. Fan Guards prevent debris falling into the fan blades and accidental

7000 Series Miniature Rocker & Lever Handle Switches

Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications

Steam & Hot Water INSTRUMENTS. Adjustable Angle Industrial Thermometer. Econo Thermometer. ] Aluminum Stem. ] Air-Duct Stem

Adjustable Angle Industrial Thermometer Recognized globally as the Trerice BX Industrial Thermometer, this is an instrument of extreme accuracy and rugged dependability. Available in scale lengths of 7"(AX),

Bulletin 1494D Fixed-Depth Flange-Mounted Circuit Breakers

Bulletin 1494D Fixed-Depth Flange-Mounted Circuit Breakers Bulletin 1494D Fixed Depth Flange Mounted Circuit Breaker Operating Mechanism Industrial rated circuit breaker operating mechansim pre-assembled

7000 Series Miniature Rocker & Lever Handle Switches

Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant

The Impressor. The Impressor. Hand-Held Portable Hardness Tester

The Hand-Held Portable Hardness Tester Aluminum Aluminum Alloys Soft Metals Plastics Fiberglass Introduction Portable Easy to Use The is a convenient tool for testing the hardness of aluminum, aluminum

Beam Clamps. Materials & Finishes (Unless otherwise

Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports

Industrial Threaded Products Inc. An authority on threaded products since 1979

R Industrial Threaded Products Inc. An authority on threaded products since 1979 Knowledge, integrity, and a dedication to service guide our business. At ITP, we stand by these principles as we have for

SCC Inc. BRx Series. Technical Instructions. Document No. CPBK-2000 September 15, BR-AS Bracket Assemblies for use with SQM Actuators

SCC Inc. BRx Series BR-AS Bracket Assemblies for use with SQM Actuators Technical Instructions September 15, 2015 Description Features Application BRx series bracket assemblies installed with Cxx series

SERVICE BULLETIN REVISION

Revision 1 REVISION TRANSMITTAL SHEET This sheet transmits Revision 1 to. A. Adds Sheet 4 to Figure 1. B. Adds instructions to make the cutouts in the stiffener on the upper engine cowl larger. NOTE: This

Inverter Grade Screw Terminal

Inverter Grade Screw Terminal electrolytic high 350 to 22,000 µf 250 to 500 WVdc 10% +50% 40 to +85 ºC Ambient Temperature +35 ºC +45 ºC +55 ºC +65 ºC +75 ºC +85 ºC 2.45 2.25 2.00 1.70 1.40 1.00 Rated

FIG Gruvlok Flanges

Gruvlok Flanges The Gruvlok Fig. 7012 Flange allows direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The two interlocking halves of the 2" thru 12" sizes of the

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871

Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability

Colorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US

Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.

7000 Series Miniature Toggle Switches

Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available

AC-20 Multi Point Actuator

29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator

Marson Rivets, Rivet Nuts and Installation Tools

Marson Rivets, Rivet Nuts and Installation Tools Table of Contents Arconic Fastening Systems (AFS) offers the broadest line of blind fasteners in the industry. The breadth of the line is supported by the

Ford Service Saddles and Tapping Sleeves

DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast

Miniature Pneumatic Solenoid Valve

V Valve 15 mm Pneumatic Solenoid Valve Typical Applications Oxygen Conservers Flow control/shut-off valve Portable Medical Devices Product Specifications Mechanical Valve Type: /3 Port, Direct-acting poppet

onlinecomponents.com

eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications

TECHNICAL. AVAILABLE UPON REqUEST CHAPTER CONTENTS. Optical comparator: For process control during serial production.

TECHNICAL INFORmATION INFORmATION ABOUT CV / RE AVAILABLE UPON REqUEST Optical comparator: For process control during serial production. Engineering: Development and design using the latest CAD systems.

7000 Series Miniature Toggle Switches

Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available

FIG Gruvlok Flange Adapter

FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method

PIPE/CONDUIT CLAMPS, SUPPORTS AND HANGERS FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL

PIPE/CONDUIT CLMPS, SUPPORTS ND HNGERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Pipe/Conduit Clamps Pipe Hangers Pipe Rollers Pipe Brackets Reference Tables 2 40 4 44 MTERIL Unistrut pipe supports, unless

DIAL DAMPER REGULATOR SET (1/4 ) Product Data Sheet

DIAL DAMPER REGULATOR SET (/4 ) Elgen s Dial Damper Regulator Set is used for controlling the damper inside the ductwork. /4 regulator sets for dampers up to 0. Quick and easy installation Kit Components

PT SS/MI - Pass Thru

PT 2424-24 SS/MI - Pass Thru TABLE OF CONTENTS 1) 2) 3) 4) Pass Thru Brochure Pass Thru Drawing Operation Instructions Parts List Latch Info Hinge Info Spring Info Halco Warranty Pgs. 2-3 Pg. 4 Pgs. 6-8

WARNING. BX Suzuki Grand Vitara Installation Instructions. Bolt Torque Specifications. Bolt Torque Specifications

Attachment Tab Height: 21-1/2 Attachment Tab Width: 24 Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and accessories are

Style 99 Roust-A-Bout Couplings

R IPS CARBON STEEL PIPE PLAIN END SYSTEM Style 99 Roust-A-Bout Couplings 14.02 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION 1 1 / 2-12" Sizes 14-18" Sizes Style 99 Roust-A-Bout couplings

Contents Project: Model: Chk d: Date:

Contents Model DSHU6. DSHU6.7 DSHU6. DSU6. DSHU6. DSU6.7 DSHU6.7 8DSU6. 8DSHU6. 8DSU6.7 8DSHU6.7 DSU6. DSU67. Section Page Specifications -7, 8 Selection Chart -7., 8. Performance Curves -6 Outline Drawings

The TeleControl Series Technical Drawings

The TeleControl Series Technical Drawings TeleControl TeleControl Enclosures Dimensions SIZE ID NUMBER OVERALL H X W X D INSIDE A X B X C E X F J K L M N HOLE DIA. SHIPPING WEIGHT PANEL NUMBER J1407TC

The Polaris MA1 is the first liquid flow meter offered by Magnetrol, expanding the already diverse level and flow measurement portfolio that has been

The Polaris MA1 is the first liquid flow meter offered by Magnetrol, expanding the already diverse level and flow measurement portfolio that has been established over the last 80 years. The electromagnetic

Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle

Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order

Alcoa Fastening Systems. Camloc Quick-Operating Fasteners

Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...

Please read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.

2009-15 Dodge Ram 1500 Sport/ST/Laramie Limited Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and accessories are intended

Bonding & Grounding. Telecommunications Main Ground Bars. Telecommunications Main Ground Bar Kits

PhysicalSupport.D 1/21/08 2:10 PM Page 121 GB4X12TMGB GB4X20TMGB GB4X12TMGBKIT Telecommunications Main Ground Bars and Kits Manufactured of 1/4 thick electrolytic tough pitch 110 alloy copper bar. Includes

6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR

C Table of Contents 6, 6 6, 6 supply ceiling diffusers feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is available. 62, 62 62FR, 629F supply,

E Series Sealed Miniature Rocker and Lever Handle Switches

Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical

Primus Wind Power. AIR Circuit Replacement Instructions

Primus Wind Power AIR Circuit Replacement Instructions Items included with this kit: (see Exploded View p. 3) ITEM ITEM NAME QUANTITY 1 SCREW - SOCKET HEAD - 10-24 X 1-1/2" 4 includes 1 spare 2 O-RING

BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS. Ideal contacts for A AA AAA N Contacts available for.062 and.093

BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS Ideal contacts for A AA AAA N Contacts available for.062 and.093 size batteries. thick PC boards Space saving design installs directly onto

Rail Fittings. Top Fittings Handrail Fittings Handrails Track Fittings Hinge Fittings Head Screws

5 Top Fittings Handrail Fittings Handrails Track Fittings Hinge Fittings Head Screws Connectors Stanchion & End Fittings Elbow Tees Rail Tees Canvas Fasteners Rail Fittings 5 Rail Fittings BIMINI FITTINGS

North American Miscellaneous Connectors

Combustion North American Miscellaneous Connectors 8775 Quick Disconnects for Oil, Compressed Air, and Natural Gas Bulletin 8770 FEATURES The 8775 couplings allow you to couple and uncouple your hoses

Section N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products

DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section N 09/2017 Web Revision 10/23/2017 Ford Fabricated Steel Products Contents Page Product Numbering System... 3 Information...............................................................

COLD AIR INTAKE INSTALLATION INSTRUCTIONS. # D Fits: E92 328i & xdrive PARTS LIST

COLD AIR INTAKE INSTALLATION INSTRUCTIONS # D760-9001 Fits: 2007-13 E92 328i & xdrive PARTS LIST (1) Intake Snorkel (1) Flex Tube (1) Brake Scoop Assy (1) Front Grill (1) Filter (1) Hardware Kit (2) Edge

CHAINS.

CHAINS www.vanguardsteel.com CHAIN TABLE OF CONTENTS Page Chain Grade 30 Dimensions 1 Grade 30 Bright 2 Grade 30 Galvanized 3 Grade 30 Zinc Plated 4 Grade 70 5 Grade 80 6 Grade 100 7 Jack 8 Long Link 9

THE ENCLOSURE HARDWARE SUPPLIER

FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...

E3 VISE ACTION Compression Latch

38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull

Please read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment.

Serial Number BX2246 Please read BOTH these and the General Towing Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed

Phone: Fax: Web: -

control series The larger ontrol Series offers standard features as well as full-panel access and all usable panel space. In addition, the standard grey cover is available with or without a full-length

WARNING Acura MDX Installation Instructions BX1015. Serial Number

Please read BOTH these and the General Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed by Blue Ox Dealers who

Modularity and simplicity in action. ÂÂ Cost effective, easy to design and install

84 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of

LoD Offroad. Jeep JK Door Linked Rear Bumper with Tire Carrier Installation Instructions

LoD Offroad Jeep JK Door Linked Rear Bumper with Tire Carrier Installation Instructions Please read through the instructions before beginning any part of the installation process. Packaging List: 1-Rear

6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR

C1 Table of Contents 1, 15 51, 515 supply ceiling diffusers feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is available. 2, 52 2FR, 2F supply,

CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70

Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile