AC-20 Multi Point Actuator

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "AC-20 Multi Point Actuator"

Transcription

1 29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator 4X Ø ± 0.1 (.210 (3.75) ±.005) (.50) 80.9 (3.19) (5.18) (.68) 119 (4.7) Panel Preparation 18.2 (.72) Pull-to-open Paddle 170 (6.7) 95.2 (3.75) (.50) (3.69) (5.18) 18.2 (.72) Maximum Door Thickness - 8 (.32) 170 (6.7) (3.69) 52 (2.05) 52 (2.05) Single or multi-point actuation capability Compatible with a wide range of rotary latches Environmentally sealed Housing: Glass-filled nylon, black Paddle: Zinc alloy, black powder coated or chrome plated Installation Notes Maximum tightening torque on supplied mounting nuts 3 N m (27 in lbf) Notes For lock core selection and a complete overview of the SOUTHCO Key-Choice System see page 158 Can be configured with 1 or 2 cables, see page 272. Recommended cable type 7 263B PP Paddle Finish 30 Chrome, polished 50 Black powder coated See table L Locking Options 1 Reversible Key (No Keys - R001) 2 Reversible Key (2 Keys included - R001) 3 Reversible Key (Keyed differently - 2 keys included) 4 Standard Key (No keys - CH751) 5 Standard Key (2 Keys included - CH751) 6 Standard Key (Keyed differently - 2 keys included) 9 No Lock Plug installed (See notes for more information) AC L 1 - PP - KC KC Key Codes (Omit for Locking Options 1, 2, 4, 5 and 9) *KD10 Keyed Differently (Only used if L =3 or 6) *MK10 Master Keyed Differently (Only used if L =6) * Supplied in multiples of 10 with 10 different key codes.

2 263C R3-22 Multi Point Actuator Pull-to-open Paddle Single or multi-point actuation capability Compatible with a wide range of rotary latches Environmentally sealed (5.07) Front flange 71 (2.8) Cable retaining clips included Latch assembly: Zinc alloy, black or white powder coated or chrome plated. Mounting bracket: Steel, zinc plated 116 (4.57) Front flange 110 () 68.5 (2.7) Installation Notes Maximum tightening torque on mounting screws: 2 N m (14 in lbf) Notes For lock core selection and a complete overview of the SOUTHCO Key-Choice System see page 158 Multi-point cables (not supplied) 102 (4) Mounting screws (4x) see table below (sold separately) Panel Preparation Mounting bracket R (sold separately) 2X 16.5 (.65) Can be configured with 1 or 2 cables. Recommended cable type 7. Cable mounting brackets sold separately. (See page 275). 85 (3.35) 100 (3.94) 9 (.35) 118 (4.65) Backside panel Order latch, bracket and mounting screws separately For latch see table For mounting bracket, order part number R See table for mounting screws Mounting bracket (sold separately) Frontside panel of door ( ) L Locking Options 0 Non-locking 1 Reversible Key (No keys - R001) 2 Reversible Key (2 keys included - R001) 4 Standard Key (No keys - CH751) 5 Standard Key (2 Keys included - CH751) 9 No lock plug installed (see notes for more information) 118 (4.65) Backside panel 100 (3.94) 118 (4.65) R L 0 - F ( ) Backside panel of door F Finish 1 Polished chrome 5 Black powder coated 7 White powder coated Screws for Mounting Bracket R Front Door Thickness No. 8 Self Tapping Screw (order 4 per latch) 1.5 (.062) (.187) R (.187) (.375) R

3 AC-10 Actuator (8.6) 65 (2.5) Large handle Flush mount Rear mount installation Flush mounting style Single, multi-point or direct pull actuation capability Multiple key code options Non-Locking option Direct Pull Recommended to use with Trigger Pull Trigger Pull 43.5 (1.71) 21.5 (.85) Multi-Point Without Cable Bracket 48.9 (1.93) Housing, handle, rotating linkage: glass-filled reinforced nylon, black 16 (1.) (.6) (8.32) Housing and handle gaskets: adhesive backed foam, black Mounting nut (M6 x 1) not supplied. Installation torque of mounting nuts not to exceed 7 N m (62 in-lbf) Notes 35 (1.4) Multi-Point With Cable Bracket (5.16) Recommended to use with Cables: see AC Cable drawing J-AC-C for cable selection. Panel Preparation ±0.3 (6 ±.01) 12X R4 (.16) ACTUAL SIZE AC-10 can only use snub end coupling (Type 6 or 7 cable). 120 (4 3X Ø 7 (.3) Recommended to use with Rods M6 x 20 (4) Threaded stud and cable bracket retainers: steel, zinc nickel Installation Notes R X Ø7 ± (2.84) (3.98) 86 ±0.3 (3.39 ±.012) 23.1 (.91) (5.41) 32.2 (1.27) Selection Notes: For use with Rods / Cables, recommended Snap-in Retainer for Rotator Plate: Southco Part Number R See Trade Drawing J-R for more details and options. For lock core selection, detailed key information and a complete overview of the SOUTHCO KeyChoice System see PK Lock Cores section. S Actuation Style L Locking Options Single Point, Direct Pull Multi-Point, without Cable Bracket Multi-Point, with Cable Bracket AC S L KC Non-Locking Reversible key (No keys - R001) Reversible key (2 keys included - R001) Reversible key (keyed differently - 2 keys included) Standard key (No keys - CH751) Standard key (2 keys included - CH751) Standard key (keyed differently - 2 keys included) No Lock Plug installed (See notes for more information) For unique key code options, please contact customer service. KC Key Codes (Omit for Locking Options 0, 1, 2, 4, 5 and 9) *KD10 Keyed Differently (Only used if L =3 or 6) *MK10 Master Keyed Differently (Only used if L =6) * Supplied in multiples of 10 with 10 different key codes. 1 (

4 AC-15 Actuator 265 Large Handle Surface Mount 84 (3.3) 84 (3.3) 55 (2.2) 55 (2.2) 120 (4.7) 218 (8.6) 120 (4.7) 218 (8.6) 65 (2.5) 65 (2.5) Housing, handle, linkage: glass-filled reinforced nylon, black (1.3) (1.3) Rear mount installation Surface mounting style Direct pull actuation Multiple key code options Non-locking option Threaded inserts: brass, natural Housing and handle gaskets: adhesive backed foam, black Trigger Pull Installation Notes Trigger Pull Panel Preparation R Actuator is recommended to use with Trigger Pull 38.1 (1.50) 38.1 (1.50) 29.8 (1.17) (1.17) 120 (4.7) 3X Ø 7 (.3) 120 (4.7) 3X Ø 7 (.3) Mounting hardware (M6 x 1) not supplied. Recommended screw length=panel thickness (.39) Installation torque of mounting nuts not 29.8to exceed 7 N m (62 in-lbf) 2.9 (.11) 2.9 (.11) 16 (1.) (.6) 16 (1.) (.6) 35 (1.4) 35 (1.4) 105 (4.1) 105 (4.1) Selection Notes: AC L KC L Locking Options Non-Locking Reversible key (No keys - R001) Reversible key (2 keys included - R001) Reversible key (keyed differently - 2 keys included) Standard key (No keys - CH751) Standard key (2 keys included - CH751) Standard key (keyed differently - 2 keys included) No Lock Plug installed (See notes for more information) KC Key Codes (Omit for Locking Options 0, 1, 2, 4, 5 and 9) *KD10 Keyed Differently (Only used if L =3 or 6) *MK10 Master Keyed Differently (Only used if L =6) * Supplied in multiples of 10 with 10 different key codes. For lock core selection, detailed key information and a complete overview of the SOUTHCO KeyChoice System see PK Lock Cores section. For unique key code options, please contact Southco.

5 266 AC-30 Multi Point Actuator Push-Button Single or multi-point actuation capability Accommodates wide panel thickness Multiple key code options Single hole install Button: Nylon Housing: Zinc or Stainless steel Lock Plug: Zinc Cam, Washer, Rivet: Stainless steel, passivated With cam attachment shown 28 (1.10) 64 (2.52) Without cam attachment shown 2 X Ø5 ±0.1 (.197 ±.004) Spacer not required if panel thickness > 10.3 (.41) Panel Thickness from 1 to 22 (.04 to.87) Max Push Travel 12 (.47) 10 (.39) Cam/ Cable Travel Ø 38.3 (1.51) 51.4 (2.02) Tab washer Mounting nut Cable holder Ø4.1 (.16) 2 (.08) ACTUAL SIZE 28 (1.10) Push Down 12 (.47) 42 (1.65) Ø 32.4 (1.27 ) Panel preparation (1.15 ) Selection E End Style 1 With Cam attached 3 Without Cam attachment H Housing Material 1 Zinc alloy with black powder coat 3 Stainless steel with black powder coat AC E L M - H B - KC B Button Material 1 Nylon, black L Locking Option 1 Reversible key (No keys - R001) 2 Reversible key (2 keys included - R001) 3 Reversible key (Multiple key codes - 2 keys included) 4 Standard key (No keys - CH751) 5 Standard key (2 keys included - CH751) 6 Standard key (Multiple key codes - 2 keys included) K Key Codes (Omit for locking options 1,2,4 and 5) KD10 Keyed differently (10 codes) MK10 Master keyed, keyed differently M Mounting Method 1 With spacer mounting (must have if glass panel) 2 Without spacer mounting

6 AC-40 Multi Point Actuator Push-Button Handle 267 With cam attachment shown Spacer not required if panel thickness > 4.6 (.18) (1.) (7.14) 47 (1.85) (1.) Single or multi-point actuation capability Accommodates wide panel thickness Multiple key code options Easy Grip Panel Thickness from 1 to 16.8 (.04 to.66) Max. Without cam attachment shown 43 (1.) 2 X Ø5 ±0.1 (.197 ±.004) 58 (2.28) 51.4 (2.02) Cam/Cable Travel 10 (.39) Ø 4.1 (.16) 142 ±1 (5.59 ±.02) Button: Nylon Housing: Zinc Alloy or Stainless steel Lock plug: Zinc Alloy Cam, Washer, Rivet: Stainless steel, passivated Ø44 (1.73) 36 (1.42) 12 (.47) Push Down M8 X 1.25 (.05) thread 18 deep (Max mounting torque: 40 (1.57) N M) Ø (1.27 ) ±1 (5.59 ±.02) 8.4 ±0.1 (.33 ±.004) 13 ±0.2 (.510±.008) E End Style 1 With Cam attached 3 Without Cam attachment H Handle Material 1 Black GF nylon with zinc housing insert 2 Black GF nylon with stainless steel housing insert Selection AC E L M - H B - KC B Button Material 1 Nylon, black L Locking Option 1 Reversible key (No keys - R001) 2 Reversible key (2 keys included - R001) 3 Reversible key (Multiple key codes - 2 keys included) 4 Standard key (No keys - CH751) 5 Standard key (2 keys included - CH751) 6 Standard key (Multiple key codes - 2 keys included) K Key Codes (Omit for locking options 1,2,4 and 5) KD10 Keyed differently (10 codes) MK10 Master keyed, keyed differently M Mounting Method 1 Cable parallel (or no cable), with spacer mounting (must have if glass panel) 2 Cable parallel (or no cable), without spacer mounting 3 Cable cross with spacer mounting (must have if glass panel) 4 Cable cross without spacer mounting

7 268 AC Single Point Actuator T-handle Surface mount installation Generous grip area Pull to activate Cable clip 20.8 (.82) 21.7 (.85) 23 (.91) Housing: PC/ABS, black T-handle and slide: Glass-filled nylon, black Clip: Acetal, black Spring: Stainless steel, passivated See table 56 (2.20) 40±0.2 (1.57±.008) 45 (1.77) Housing 25±0.2 (.98±.008) 4 x Ø 4.5±0.1 (.18±.004) (For thru hole mounting) (4.11) 117 Open (4.61) T-handle 60 (2.36) Pull direction AC AC Single Point Actuator Plastic paddle and housing Front mount installation Flush Two cable mounting options Paddle and housing: Glass-filled nylon, black Spring: Stainless steel, passivated (.22) (1.13) 53.7 (2.11) (4.26) Panel 91.6±0.3 (3.61±.012) 80±0.3 4 x R5 (.2) Maximum (3.15±.012) 2 x Ø 4.5±0.1 (.177±.004) (For thru hole mounting) 42±0.5 (1.65±.02) 21±0.2 (.83±.008) 5.8±0.1 (.23±.004) 38.3 (1.51) Panel thickness See table Cable placement 2 Cable placement 1 AC Cable Orientation Panel Thickness Cable Travel Placement (.49) maximum 11.1 (.44) Placement 2 16 (.63) maximum 13.2 (.52)

8 AC Single Point Actuator Push-button (.24) 64.6 (2.54) Knob Ø 26 (1.02) Ø 38 (1.50) Mounting nut Housing Door panel 26 (1.02) Maximum panel thickness +1 Ø (1.26 ) -0 30±0.2 (1.18±.008) Double-D hole preparation Flush Mounting hardware included Push button and housing: PC/ABS, black Cam: Glass-filled nylon, black Spring: Stainless steel, passivated Cam 13.7 (.54) Cable travel See table ACTUAL SIZE AC AC Single Point Actuator Aluminum paddle and housing 73 (2.87) 4X R5 Max 2X Ø 4.5 ±0.1 (.177±.004) (For thru hole mounting) 18.9 (0.74) 38.9 (1.53) Front mount installation Three cable mounting options Low profile Robust material Cable Placement 1 Cable Placement (3.78) Cable Placement 3 13 (0.51) 35.9 (1.41) 30.3 (1.2) 81 (3.2) AC ±0.1 (0.15 ±0.003) Cable Orientation Panel Thickness Cable Travel Placement (.49) max (.44) Placement 2 16 (.63) max (.52) Placement 3 16 (.63) max (.52) Paddle and housing: Aluminum, black powder coated Notes AC-75 can only use snub end coupling (Type 6 or 7 cable). See table

9 270 AC-50 Single Point Actuator Squeeze handle Single actuation capability Accomodates tubular construction or rounded mounting surfaces Squeeze Handle Handle travel Housing, handle: Glass-filled nylon, black Installation Notes Installation torque of screws not to exceed 2 N m maximum (Countersunk screws or rivets recommended) Pull Direction 12 Cable travel Retaining clip included R Use Southco cable end fitting type B (L type) (Cable sold separately. Refer to Southco drawing J-AC-C for Cable Selection Guide.) AC Panel Preparation (.8) X M5 Thread Squeeze handle assembly Customer installation tube

10 AC Single Point Actuators Stainless Steel M1 Style Actuator mm (1.5 ) Shown actual size 50mm (2 ) Shown actual size Ø 44 (1.73) Ø 61 (2.41) Locking handle shown (also available as non-locking) Actuator Assembly (38mm (1.5) shown) Single, round-hole installation Locking style restricts access Premium finish and corrosion resistance Latch: 316 grade stainless steel, bright polished Spacer: Nylon, black Contact Southco for other finishes Performance Details Max. static load: 545 N (122 lbf) Accessories - 38mm (1.5 ) Spacer: M Mounting screws: M One key supplied per latch for additional keys order M S 38mm (1.5) Ø38.1 ±0.5 (1.50 ±.02) mm (2) Ø50 (2.00 ) - 0 Mounting Bracket Phillips Recess Pan Head Mounting Screws (included) Cable mounting bracket (Sold separately) See page 275 (1/8 Mounting screws not included) Retainer Clip (Sold separately) R (1.) Door Thickness Door Accessories - 50mm (2 ) For lock style 4 Key (pair) Part number: M1-546 For lock style 7 Overmolded key S008 (pair) Part number: M S008 Size Actuator Assembly Door Thickness Cable Mounting Bracket 38mm (1.5) 50mm (2) Locking (2 keys supplied) Non-Locking Locking (2 keys supplied) Non-Locking AC-M AC-M mm R mm R mm R mm R AC-M mm R AC-M mm R AC-M mm R AC-M mm R Cable Travel 13 (.5) Cable Mounting Bracket Cables Constructed from marine grade stainless materials, the cable is suitable for multiple bends and can be further customized upon request. Key-Locking keyed alike S008 AC-M mm R AC-M mm R mm (1.5) 2.5 (.10) 50mm (2) 3 (.12)

11 271A 64 Push-to-Close Actuator Pull-to-open Paddle handle actuator Multi-point Large Flush mounting installation Multiple mounting styles Locking and Non-Locking options (5.50) 29 (1.14) Latched 25 (1.0) Unlatched Stainless steel, polished, steel, zinc plated or black powder coated Accessories Flat key, keyed alike CH751 (2 keys per ring) Part number: PK (4.25) Available with or without lock (see part number selection) 4 x Ø H rivet mounting only 47 (1.85) Unlatched 70 (2.75) Latched 1.2 (.05) 23 (.91) 40.9 (1.61) Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK Ø 2.3 (.09) Ø 3 (.13) 12 (.45) 118 (4.65) 95.2 (3.75) Notes AC Cable end fitting must be eyelet for this actuator (Page 272) (2 PL) For use with AC Cables, must use eyelet fitting. Use cotter pin to secure end fitting (3.81) 86 (3.38) 4 x R 5 (.20) Maximum Door H 4 x Ø Rivet mounting only Selection H Housing 0 Weld 1 Rivet through hole 4.9 (.19) 2 Rivet through hole 5.2 (.20) L H - M M Material 10 Steel, zinc plated 20 Stainless steel, polished 50 Steel, black powder coated L Lock style 0 Non-locking 1 Key-locking keyed alike CH751 (2 Flat keys supplied)

12 AC Cable Splitter 271B 110 (1) 54.2 (2.15) 97 (3.82) 4.5 (.18) dia x 3 15 (.59) 30 (1.18) Allows one actuation point for two rotary latches or two actuation points for one rotary latch Adjustable to fine tune timing of actuation points Cable splitter and cables sold separately Housing: Black Polypropylene Slider: Black Glass-filled nylon See page 272 and 273 for cable end fitting and cable type ø 4.5 (.18) optional locking screw point - use PT K60 screw not supplied 23.4 (.92) 115 (4.53) Cables shown for illustration only - to be ordered separately Packaged Delivery Condition After customer assembly Clips detached from slider and installed to secure cables. PULL One actuation point for two rotary latches Two actuation points for one rotary latch Latches Latch Actuator PULL Actuators PULL PULL AC

13 AC Cables Cable Accessories 275 Retainer Clip C E Ø B D For use with Ø 4 (.157) rod or Southco cable assembly Clip: Acetal Latch Series Trigger / Lever Type Part Number R4-05 Bottom R Beige Color B C D E 5.9 (.23) 3.5 (.13) 16.4 (.65) 2.8 (.11) Trigger / Lever Hole Diameter 6.4 Trigger / Lever Thickness 3 (.12) Bracket: Steel See table Perpendicular In-line Two Point R R Black Red 5.9 (.23) 2.5 (.10) 14.4 (.57) 2 (.08) R4-10 Bottom / Top R Black Dual Trigger 5.9 (.23) R Black 5.9 R Red (.23) R Black 5.9 (.23) 4.5 (.18) 2.5 (.10) 4.5 (.18) 16.4 (.65) 14.4 (.57) 16.4 (.65) 4 (.16) 2 (.08) 4 (.16) R4-30 Perpendicular Two Point R Black 5.9 R Red (.23) Bottom R Black 5.9 (.23) 2.5 (.10) 4.5 (.18) 14.4 (.57) 16.4 (.65) 2 (.08) 4 (.16) R4-20 Bottom R4-50 Perpendicular R White 4.5 (.18) 16.4 (.65) 6.7 (.26) 4 (.16) Cable Mounting Bracket 1.9 (.07) 28.1 (1.11) A R (1.22) A R (1.10) R (.75) Actuator Assembly Mounting Bracket Retainer Clip Mounting Screws Cable Mounting Bracket (1/8 Mounting screws not included)

Multiple key codes Tool actuation Change key codes in future Configure to order. Page 164 Page 164

Multiple key codes Tool actuation Change key codes in future Configure to order. Page 164 Page 164 162 CM Cam Locks Selection Removable core options provide maximum flexibility Fixed core options provide simple, economic solutions Sealed housings are available Multiple finishes A broad selection of

More information

H3 Swinghandle System

H3 Swinghandle System 192 H3 Swinghandle System Medium / large Sealed / non-sealed Zinc alloy swinghandle system Multiple locking options; including DIN profile Indoor/outdoor version Available for medium (125mm x 25mm and

More information

Swing Handles & Latches

Swing Handles & Latches ov-swing-handles-&-paddle-latches-divider - Updated - 12-01-2017 w Swing Handles - Cam Control Swing Handles - Rod Control Flush T-handle Latches Paddle Latches Swing Handles & Latches 30 Swing Handles

More information

RZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0

RZT TWIN STICK HYDRO DRIVE 250 Z 44 & 50 SERIES 0 Parts Manual for RZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0 MODEL ERZT185440BVE RZT22500BVE2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 1,

More information

Weld-on Hinges Weld-on Hinges

Weld-on Hinges Weld-on Hinges 54 53 Weld-on Hinges 7004.00 Satin Brass Washer Pin Grease Nipple Weld-on Hinges 7004.90 Aluminium Satin Stainless Washer Stainless Pin Grease Nipple 55 Weld-on Hinges 7005.00.080, 7005.00.100 Satin Brass

More information

Part Numbers: TTU-BGP14 & TTU-BGB14

Part Numbers: TTU-BGP14 & TTU-BGB14 Date: 10.14.2015 TOYOTA TUNDRA 2014-17 Billet Grille Part Numbers: TTU-BGP14 & TTU-BGB14 Grille Hardware Bag Contents Item # Quantity. Description 1 6 U-Nuts 2 8 #10 Screws 3 2 #8 Screws 4 2 2 Flange Brackets

More information

Personal Care Commode

Personal Care Commode Parts Catalog Issued: Jun 2, 2009 Personal Care Commode Yes, you can. Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service

More information

Short-throw Shifter Installation Guide

Short-throw Shifter Installation Guide Short-throw Shifter Installation Guide Removal Procedure 1) Remove the shift control knob. A. Lift up on the rear portion of the shift control closeout boot retaining ring and detach the retaining ring

More information

A Series 1-4 Pole Rotary Switches

A Series 1-4 Pole Rotary Switches 1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small

More information

ADJUSTABLE FOOT INSERTS FOR ROUND TUBING

ADJUSTABLE FOOT INSERTS FOR ROUND TUBING ADJUSTABLE FOOT INSERTS FOR ROUND TUBING J D E F A B C G H I K INSERTS FOR 1-5/8 IN. (40MM) O. D. 16 GA. ROUND TUBING HEX FOOT Thermoplastic, or die-cast Zamak insert body with die cast or stainless steel

More information

D8 DZUS PANEX Quarter-Turn Fasteners

D8 DZUS PANEX Quarter-Turn Fasteners 392 DZUS ANEX Quarter-Turn Fasteners Studs Size 4 Studs: Steel, zinc plated plus chromate or chrome plated Bail cover: ABS, black H Head Styles - Tool Actuated Oval Slot Hex Recess hillips Recess 1.3 (.051)

More information

LOCK PLUG SYSTEM. Section D - Cabinet Locks & Latches. Timberline Interchangeable Lock Plug System One Lock Plug Fits All Cylinder Body Applications

LOCK PLUG SYSTEM. Section D - Cabinet Locks & Latches. Timberline Interchangeable Lock Plug System One Lock Plug Fits All Cylinder Body Applications LOCK PLUG SYSTEM Timberline Interchangeable Lock Plug System One Lock Plug Fits All Cylinder Body Applications Why Interchangeable Lock Plugs? If a new key is required to work a series of locks, substantial

More information

Material: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated

Material: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated 4-249 Hinge Pr01 180 Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt

More information

H E AV Y G L ASS PROLINE DESIGNER SERIES

H E AV Y G L ASS PROLINE DESIGNER SERIES H E AV Y G L ASS PROLINE DESIGNER SERIES Alumax ProLine FRAMELESS SLIDERS Now available in Oil-Rubbed Bronze! Our ProLine sliders feature minimal hardware and frameless 3/8 heavy glass for a truly open

More information

Entry and Cabin door Locks & Latches (Swing)

Entry and Cabin door Locks & Latches (Swing) MARINE PRODUCT OVERVIEW Engineered Access Solutions 2 Entry and Cabin door Locks & Latches (Swing) Electronic Access Solutions Hinges & Display Mounts Entry Door Locks & Latches (Slide) Compression, Cam

More information

Key in Lever and Key in Knob Locksets

Key in Lever and Key in Knob Locksets Key in Lever and Key in Knob Locksets Locksets Key in Knob and Key in Lever Key in Knob and Key in Lever Locksets Overview Lockwood offers a range of Key in Knob and Key in Lever locksets for all architectural,

More information

ACCESSORIES. Accessories/Body/Tools/Exhaust Section (E) Version 01 March/05

ACCESSORIES. Accessories/Body/Tools/Exhaust Section (E) Version 01 March/05 Accessories/Body/Tools/Exhaust ACCESSORIES MIRROR ADAPTORS Mirror Adaptor Set - 10mm. adaptor for Left hand threads, allows use of all conventional mirrors on Yamaha s (Yamaha s mirrors have Left hand

More information

Size 225mm. 425mm 760mm. Code. Code. Size 225mm SYK038600

Size 225mm. 425mm 760mm. Code. Code. Size 225mm SYK038600 STRAP WRENCH - HEAVY DUTY - RT12/273B STRAP WRENCH - 12005 Lever handle made from hardened heavy gauge steel Heavy duty bonded strap for extra strength Comfortable vinyl grip Ideal for use on automotive

More information

PARTS LIST ELECTRIC CHARGER 1500

PARTS LIST ELECTRIC CHARGER 1500 PARTS LIST ELECTRIC CHARGER 1500 HANDLE ASSEMBLY - 5293999 120 VOLT - 75 FOOT CORD HANDLE ASSEMBLY - 5296609-240 VOLT - 75 FOOT SHUKO CORD ITEM PART NO. PART DESCRIPTION QTY. 101 5092322 BLACK VINYL COVER

More information

Parts Catalog Issued: Feb 5, Invacare I-Lift. Patient Transport Lift

Parts Catalog Issued: Feb 5, Invacare I-Lift. Patient Transport Lift Parts Catalog Issued: Feb 5, 2016 Invacare I-Lift Patient Transport Lift Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains

More information

LH: 21.1 GROUP CODE MATERIAL. Plastic. Keyed alike. 01 For cams please check page: Keyed differ Stainless steel dust cap (Keyed alike)

LH: 21.1 GROUP CODE MATERIAL. Plastic. Keyed alike. 01 For cams please check page: Keyed differ Stainless steel dust cap (Keyed alike) 107 KNOB - ON LOCK 261 L: 21.1 27 Clip fixing for easy assembly. Mounting nut not required. Special 20mm x 26mm cut out. There is no IP 65 version of this lock. 1.8mm maximum panel thickness. Clips to

More information

21" STEEL DECK WALK BEHIND MOWER "MR" SERIES 17

21 STEEL DECK WALK BEHIND MOWER MR SERIES 17 Parts Manual for "MR" SERIES 17 PUSH MODELS MR216017B MR216017BV MRP216517B WMR216017B WMR216017BV WMR216517B PROPELLED MODELS MRP216017B MRP216017BV MRP216517B WMRP216017B WMRP216517B EMRP216017B EMRP216517B

More information

about southco CONNECT CREATE INNOVATE 5 Years of Continuous Development

about southco CONNECT CREATE INNOVATE 5 Years of Continuous Development Southco s ROTARY Latching solutions CONNECT CREATE INNOVATE THE R4 ROTARY LATCH SYSTEM 5 Years of Continuous Development Over the last 5 years, Southco has invested in the expansion of our rotary latching

More information

METALPLAST-SOPRANA srl BRUINO TO VIA VOLVERA 88/4 TELEPHONE FAX

METALPLAST-SOPRANA srl BRUINO TO VIA VOLVERA 88/4 TELEPHONE FAX 1 5 LOCKS >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 COMPRESSION LEVER LATCH WITH KEY CODES 140143-140142

More information

Rail Fittings. Top Fittings Handrail Fittings Handrails Track Fittings Hinge Fittings Head Screws

Rail Fittings. Top Fittings Handrail Fittings Handrails Track Fittings Hinge Fittings Head Screws 5 Top Fittings Handrail Fittings Handrails Track Fittings Hinge Fittings Head Screws Connectors Stanchion & End Fittings Elbow Tees Rail Tees Canvas Fasteners Rail Fittings 5 Rail Fittings BIMINI FITTINGS

More information

Replacement Part Diagrams SG12 Series Surface Grinder

Replacement Part Diagrams SG12 Series Surface Grinder Replacement Part Diagrams SG Series Surface Grinder SG GrinderS FOrM GOMxxxxxxxx, VerSiOn.0, AUTHOriZATiOn: xxx, PAGe: Frame Assembly SG/E Surface Grinder SG GrinderS FOrM GOMxxxxxxxx, VerSiOn.0, AUTHOriZATiOn:

More information

HOW BENDS ARE MEASURED EXAMPLES BEND INFORMATION. The degree of a bend may be measured with either a protractor or an angle finder.

HOW BENDS ARE MEASURED EXAMPLES BEND INFORMATION. The degree of a bend may be measured with either a protractor or an angle finder. HOW BENDS ARE MEASURED EXAMPLES The degree of a bend may be measured with either a protractor or an angle finder. 90 OBTUSE ANGLE 45 135 DEGREE OF BEND 45 A B 0 BEND INFORMATION 180 The bend radius is

More information

CONNECTORS - SINGLE POLE

CONNECTORS - SINGLE POLE CONNECTORS - SINGLE POLE CROCODILE CLIPS DAVID USE PHOTO SD0010 TERMINAL POSTS SOLDER TAGS CRIMP CONNECTORS CRIMPING TOOLS DAVID USE PHOTO SD0010 BOOTLACE FERRULES 2127 CABLE SPLICES 2128 CRIMP CONNECTORS

More information

VOLKSWAGEN AMAROK 3 PIECE HARD TONNEAU COVER INSTALLATION INSTRUCTIONS

VOLKSWAGEN AMAROK 3 PIECE HARD TONNEAU COVER INSTALLATION INSTRUCTIONS VOLKSWAGEN AMAROK 3 PIECE HARD TONNEAU COVER INSTALLATION INSTRUCTIONS Care Instructions: Clean Tonneau Cover with a mild detergent and water solution. Do not use abrasive cleaners or solvents. Place these

More information

Installation instructions for Camaro/Firebird and Nova* Windshield Wiper Systems

Installation instructions for Camaro/Firebird and Nova* Windshield Wiper Systems Installation instructions for 1967-69 Camaro/Firebird and 1968-74 Nova* Windshield Wiper Systems The Raingear 1967-69 Camaro/Firebird and 1964-74 Nova wiper system is designed for ease of installation

More information

Champion Series Zero-Turn Riders & Mower Decks

Champion Series Zero-Turn Riders & Mower Decks Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP

More information

Numatic International Spare Parts Numatic International Spare Parts Model No: Twintec Squeegee Assy (650mm Scrub Width/38mm Hose)

Numatic International Spare Parts Numatic International Spare Parts Model No: Twintec Squeegee Assy (650mm Scrub Width/38mm Hose) 0 Model No: Twintec Squeegee Assy (0mm Scrub Width/mm Hose) NB: FOR WIRING SEE DRAWING: N/A DRAWING: DRW- ISS: A0 0//00 Model No: Twintec Squeegee Assy (0mm Scrub Width/mm Hose) 0 (0MM SCRUB WIDTH) ALUMINIUM

More information

Commercial Body Fittings 8th Edition. Underbody Access Step Galvanized 2-Rung, Heavy Duty. Frame: L595 x W350mm

Commercial Body Fittings 8th Edition. Underbody Access Step Galvanized 2-Rung, Heavy Duty. Frame: L595 x W350mm STEPS Commercial Body Fittings 8th Edition No. ABUS871/BRGV wgt. 6.00kg No. ABUS876/BRGV wgt. 11.20kg Underbody Access Step with Platform 2-Rung, Heavy Duty Step: L600 x W285mm Frame: L815 x W340mm l Platform

More information

Spring Steel Fasteners

Spring Steel Fasteners Conduit Supports 1 Available for 3/8 No tools needed! in. through 2 in. Finger friendly trade sizes for design! EMT, flexible conduit and MC/ AC cable Available with either a plain hole for 1/4 in. bolt

More information

BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS. Ideal contacts for A AA AAA N Contacts available for.062 and.093

BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS. Ideal contacts for A AA AAA N Contacts available for.062 and.093 BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS Ideal contacts for A AA AAA N Contacts available for.062 and.093 size batteries. thick PC boards Space saving design installs directly onto

More information

2300/2320. MORTISE LOCKS AND HANDLESET ACCESSORIES (Keepers, Spacers, Adapters and Bumpers)

2300/2320. MORTISE LOCKS AND HANDLESET ACCESSORIES (Keepers, Spacers, Adapters and Bumpers) HANDLES & LOCKSETS MORTISE LOCK APPLICATIONS 2300/2320 Truth Hardware realizes that each profile in the marketplace may require its own particular hardware component due to the variety of mounting applications

More information

BESTEEL 170 SERIES CURTAIN TRACKS

BESTEEL 170 SERIES CURTAIN TRACKS BESTEEL 170 SERIES CURTAIN TRACKS BL = Black Finish 2XX Series Track Systems have a black finish. Parts Included 170 (270) 170 BESTEEL CWANA code CORD OPERATED/MOTORIZED 171 (271) 171-R (271-R) 260 172

More information

Cat. No Printed 11/94 PORTABLE SERVICE EQUIPMENT & SUPPLIES WITH PARTS LIST Culligan International Company Printed in USA

Cat. No Printed 11/94 PORTABLE SERVICE EQUIPMENT & SUPPLIES WITH PARTS LIST Culligan International Company Printed in USA Cat. No. 01-8819-44 Printed 11/94 PORTABLE SERVICE EQUIPMENT & SUPPLIES WITH PARTS LIST 1994 Culligan International Company Printed in USA PORTABLE SERVICE EQUIPMENT & SUPPLIES WITH PARTS LIST Table of

More information

PANASONIC Models: MC-9410, MC-9420, MC-9430, MC-9440

PANASONIC Models: MC-9410, MC-9420, MC-9430, MC-9440 Dust Cover and Attachments A1... P-12429... Indicator Plate, 9410 A1... P-12430... Indicator Plate, 9420 A1... P-12431... Indicator Plate, 9430 A1... P-12432... Indicator Plate, 9440 A2... P-12433... Indicator

More information

Allegis Outswing Latch Installation

Allegis Outswing Latch Installation Allegis Latch Kit F E D B A A B Latch Mechanism Foam Gasket C Tinnerman Escutcheon G D Lock Nut C E Roller Cam J F G Inside Handle Flange Nut H Outside Door Handle I H I J Machine Screw Screw Cover Plug

More information

Door Hinges Concealed Hinges

Door Hinges Concealed Hinges Concealed mortise hinge For installation in wall recesses For flush wooden or metal doors Suitable for DIN left hand and DIN right hand Certified for fire resistant and smoke control doors in compliance

More information

Times-2 Speed Files INSTALLATION INSTRUCTIONS

Times-2 Speed Files INSTALLATION INSTRUCTIONS Times-2 Speed Files INSTALLATION INSTRUCTIONS AURORA from RICHARDS-WILCOX, INC. 600 South Lake Street Aurora, Illinois 60506 Phone: 630-897-6951 Fax: 630-897-6994 Toll Free: 800-277-1699 TIMES-2 SPEED

More information

WESTWOOD GARDEN TRACTORS 1983 PARTS CATALOGUE CONTENTS

WESTWOOD GARDEN TRACTORS 1983 PARTS CATALOGUE CONTENTS WESTWOOD GARDEN TRACTORS 1983 PARTS CATALOGUE CONTENTS PAGE No. W6R, W6E, W8E/28, W8C UPPER FRAME, BONNET & GRILLE, CONSOLE, ELECTRICAL, SEAT, STEERING WHEEL, ROAD WHEELS 2 3 W8E, W11C, W11E UPPER FRAME,

More information

X Series. Features. comparison chart. Lock type. Glossary and finish chart. MA Series. RU Series

X Series. Features. comparison chart. Lock type. Glossary and finish chart. MA Series. RU Series Lock type finish chart MA X Grade 1, heavy-duty cylindrical knob locks RU T When you need a tough, reliable lock that can also withstand the corrosive conditions of a marine environment you need a Falcon

More information

Petrol chainsaw----p File: Version: 1.0 Ihr Ersatzteilspezialist im Internet

Petrol chainsaw----p File: Version: 1.0 Ihr Ersatzteilspezialist im Internet Petrol chainsaw----p File: Version: 1.0 Spare Parts list File: 0040100903BD Version: 1.0 Petrol chainsaw----pcs46b Pos. No Part code English QTY 1 905207 front handle assy 1 B350012 2 Hexagon lobular

More information

DA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED

DA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED VALBIA ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth

More information

Stanley Hand tools Features & benefits stanley Fatmax screwdrivers. 11 piece stanley Fatmax screwdriver set

Stanley Hand tools Features & benefits stanley Fatmax screwdrivers. 11 piece stanley Fatmax screwdriver set Stanley Hand tools Features & benefits stanley Fatmax screwdrivers Ergonomically designed tri-lobular handle provides more torque than traditional-style screwdrivers for less effort. High strength polypropylene

More information

FIRE DOORS FIBERGLASS & STEEL SYSTEMS

FIRE DOORS FIBERGLASS & STEEL SYSTEMS FIBERGLASS & STEEL SYSTEMS JELD-WEN Fire Door Systems are engineered to conform to either 90-minute or 20-minute fire codes. Unmatched adjustability, ease of installation and reliability distinguish the

More information

Cetra Assembly Instructions

Cetra Assembly Instructions 99877 Revision F- Complete Series Master Packet If you have any questions concerning these instructions, please call Kimball Office Customer Service. 0 Kimball International, Inc. T 800.8.88 F 8.8.800

More information

57 FIN MOLDING FIN MOLDING PIN SETS. NOMAD Only MOLDING CLIPS

57 FIN MOLDING FIN MOLDING PIN SETS. NOMAD Only MOLDING CLIPS PHONE: 215-348-5568 / FAX: 215-348-0560 115 57 FIN MOLDING 20-007 Fin CORNER MOLDING CLIPS, 57, Pr. 10.50 R Fin Molding Clips These have an Orange enamel finish These are the only ones made in the USA

More information

Kin Kei Hardware Industries Limited

Kin Kei Hardware Industries Limited Kin Kei Hardware Industries Limited E-mail: kinkei@hardware.com.hk Website: www.hardware.com.hk Rim Cylinder Euro Cylinder Mortise Cylinder VOLAR 1 INDEX A) Cylinder 1) Euro Profile Cylinders a) Yale Keyway

More information

BRACKETS, HOLDERS & ACCESSORIES

BRACKETS, HOLDERS & ACCESSORIES DELUXE BANNER ARM MOUNTING SETS Each set contains cast aluminum mounting bracket(s) with stainless steel mounting straps. Crossbars are fabricated from 1 1 /2 outside diameter clear anodized aluminum poles

More information

Product Data For FARNELL

Product Data For FARNELL ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:

More information

iqpc912 PARTS MANUAL PC912PM v1

iqpc912 PARTS MANUAL PC912PM v1 iqpc912 PARTS MANUAL PC912PM v1 See Page 10 See Page 6 & See Page 12 See Page 2 See Page 16 See Page 1 See Page 1 See Page See Page 22 See Page 20 See Page 2 See Page 26 3 16 19 1 17 1 1 11 13 12 10 9

More information

21" STEEL DECK WALK BEHIND MOWERS SERIES 17

21 STEEL DECK WALK BEHIND MOWERS SERIES 17 Parts Manual for 21" STEEL DECK WALK BEHIND MOWERS SERIES 17 PUSH MODELS 216517B 2167517BV R215517HC R2167517BV PROPELLED MODELS P215517HC P216517B P2167517BV P2167517BVE P217017BV P217017BVE RP215517HC

More information

UFP PRODUCTS. Unique Functional Products. 1. Actuator. 2. Couplers. 3. Stainless Steel Bearing Protectors, Buddy Brake

UFP PRODUCTS. Unique Functional Products. 1. Actuator. 2. Couplers. 3. Stainless Steel Bearing Protectors, Buddy Brake 1. Actuator 2. Couplers 3. Stainless Steel Bearing Protectors, Buddy Brake 4. Wheel Bearing Kits, Grease Seals 5. Spindo Seal Kits 6. Trailer Buddy Products 7. Hubs & Hub/Drums 8. Disc Brakes 9. Springs

More information

Parts Catalog Issued: Jan 17, Bed Rails

Parts Catalog Issued: Jan 17, Bed Rails Parts Catalog Issued: Jan 17, 2017 Bed Rails Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for. If you have

More information

EUROPEAN REAR ENGINE RIDER SERIES 20

EUROPEAN REAR ENGINE RIDER SERIES 20 Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,

More information

RZCG... AP54... AP6452 AP6462 AP6472. Open cells foam for protection loudspeakers. Thickness from 5 to 20 mm. Protection grilles for Speaker

RZCG... AP54... AP6452 AP6462 AP6472. Open cells foam for protection loudspeakers. Thickness from 5 to 20 mm. Protection grilles for Speaker 1 2 RZCG... Open cells foam for protection loudspeakers. Thickness from 5 to 20 mm material: Polyurethane weight: 75-300 gr/m² AP54... Protection grilles for Speaker material: Steel 12/10 weight: 80-960

More information

182 Pigtails, Brackets and Grommets

182 Pigtails, Brackets and Grommets 182 Pigtails, Brackets and Grommets 66930 66931 67001 66850 66851 66801 Thin-Line LED Pigtails Factory-molded plugs for use with ULTRA-BLUE-SEAL trailer wiring system UBS sealing ring Uses patented double-seal

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS OV310G MINI RACK OVEN ML-132515 OV310G A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43242 Rev. D (January 2018) F-43242 Rev. D (January

More information

CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70

CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70 Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile

More information

Parts Manual for (L.E.) SINGLE STAGE SNOW THROWER SERIES 0 MODELS LE3170R LE3170E LE30R LE30E ELE30R 30M (1694382) 30E (1694383) IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE

More information

365L (2001) Page 1 of 36 54" Deck Assembly

365L (2001) Page 1 of 36 54 Deck Assembly 365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting

More information

Laboratory Clamps & Supports

Laboratory Clamps & Supports Laboratory Clamps & Supports Multi-Purpose Clamps Specialty Clamps Clamp Accessories Connectors & Holders Lab-Frames Support Stands & Plates Safety Equipment Lab-Lifts Flow Control MULTI-PURPOSE UltraJaws

More information

SECTION METAL LOCKERS. A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.

SECTION METAL LOCKERS. A. ADAAG Americans with Disabilities Act, Accessibility Guidelines. SECTION 10 51 13 METAL LOCKERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Heavy Duty Welded Gear Lockers. B. Locker benches. 1.02 REFERENCES A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.

More information

Laboratory Clamps & Supports

Laboratory Clamps & Supports By Laboratory Clamps & Supports Multi-Purpose Clamps Specialty Clamps Clamp Accessories Connectors & Holders Lab-Frames Support Stands & Plates Safety Equipment Lab-Lifts Flow Control MULTI-PURPOSE UltraJaws

More information

Ford Frame and Suspension

Ford Frame and Suspension 20 1941-48 FORD Hot Rod Suspension Parts Please see page 12 For information on our 1941-48 Frame exchange program FRONT SHOCK KIT Super strong - 3 point mounting on upper bracket insures against breakage.

More information

Durulite Door Hardware Manual

Durulite Door Hardware Manual R Durulite Door Hardware Manual World s Leading Manufacturer Of Traffic Doors Cincinnati, Ohio and Redmond, Oregon Phone: 1-800-543-4455 FAX: 1-800-245-7045 Www.chasedoors.com TABLE OF CONTENTS DESCRIPTION

More information

Cable Shift Linkage Kit

Cable Shift Linkage Kit Cable Shift Linkage Kit INSTALLATION INSTRUCTIONS Ford column to Ford 4R70W/AODE Trans FOR PART NUMBER S: 2802650010 S INCE 1986 www.ididitinc.com 610 S. Maumee St., Tecumseh, MI 49286 PH: (517) 424-0577

More information

ARIZONA SUPER STOCK Super Stock Rules and Regulations

ARIZONA SUPER STOCK Super Stock Rules and Regulations ARIZONA SUPER STOCK 2014 Super Stock Rules and Regulations If the rules don t say you can, assume you cannot. The rules are written as a guideline. If you are unsure about something, ask an official. The

More information

1 KW-880 Parts Manual

1 KW-880 Parts Manual Headstock... 2 Hitch Beam... 4 Central Gearbox... 6 Central Gearbox... 8 Intermediate Beam... 10 Intermediate Beam... 12 Intermediate Beam Outside... 14 Intermediate Beam Outside... 16 Outer Support Tube...

More information

back width 19 seat width seat depth 19 Armless Armless

back width 19 seat width seat depth 19 Armless Armless n Top stitch sewn fabric on seat and n Standard seat approx. range for model pictured (floor to top of seat): 18 1/2 to 21 3/4 (with 1101 cylinder) Model 25114 01A Fold away arm with vertical and horizontal

More information

Solid Aluminum & Brass

Solid Aluminum & Brass Orchard Lock Distributors, Inc. Solid Aluminum & Brass A1105B-KA-63685 (Blue) A1105D-KA-63685 (Brown) A1105E-KA-63685 (Green) A1105R-KA-63685 (Red) A1107R-KA-25672 (Red) Solid Aluminium Padlocks Corrosion

More information

R O A D S M I T H TRIKE CONVERSIONS BY THE TRIKE SHOP

R O A D S M I T H TRIKE CONVERSIONS BY THE TRIKE SHOP R O A D S M I T H TRIKE CONVERSIONS BY THE TRIKE SHOP Please thoroughly review the instructions before and during installation. Keep in mind that this product was designed to be installed by trained dealer

More information

CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER REPAIR SHEET

CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER REPAIR SHEET CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER 5.50 REPAIR SHEET CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER 5.50 Figure A 4 5 7 8 0 4 5 7 8 0 5 4 7 8 0 5 4 5 7 8 40 4 4 4 44 45 4 4 47 48 50 4 5 5 4 5 54 5 55

More information

CRAFTSMAN 10 in. TABLE SAW MODEL NO REPAIR SHEET

CRAFTSMAN 10 in. TABLE SAW MODEL NO REPAIR SHEET CRAFTSMAN in. TABLE SAW MODEL NO. 1.2100 REPAIR SHEET 44 144 4 Figure B 10 14 1 12 12 12 4 4 Figure A 14 1 1 1 1 4 1 4 121 2 4 140 1 11 11 11 42 1 1 120 12 21 40 4 1 141 2 4 11 SEE NOTE 11 114 0 1 2 2

More information

Super 1050 Chain Saw UT Page 1 of 16 Carburetor Chamber

Super 1050 Chain Saw UT Page 1 of 16 Carburetor Chamber Super 1050 Chain Saw UT-10139 Page 1 of 16 Carburetor Chamber Super 1050 Chain Saw UT-10139 Page 2 of 16 Carburetor Chamber 1 58319A 1 RING- Retaining 2 592301 1 COVER- Air filter 3 A70326 1 NUT- Cover

More information

FURNITURE & CABINET LOCK

FURNITURE & CABINET LOCK FURNITURE & CABINET LOCK LOCK HARDWARE Www.ammalocks.com DRAWER LOCKS 1 DRAWER LOCK (DIAMOND BACK) 15.7 2.7 106 ITEM NO: 106 100 key changes, K/A, K/D FINISHES: nickel PACKAGING: 2 keys SUITABLE FOR: 7/8"

More information

Section 9 Pins, Rings, Springs & Hooks

Section 9 Pins, Rings, Springs & Hooks Section 9 Pins, Rings, Springs & Hooks Contents...Page # Springs...234 Ajax Wire...235 Tube Assortments...236 Springs...237-242 Retaining Rings...243 Basic External Retaining Rings...244 Retaining Rings...245

More information

GREEN GARDE MODEL JD9-C - HIGH PRESSURE SPRAY GUN

GREEN GARDE MODEL JD9-C - HIGH PRESSURE SPRAY GUN GREEN GARDE MODEL JD9-C - HIGH PRESSURE SPRAY GUN Guns Spray 38500 Model JD9-C - 38500 The JD9 heavy-duty spray gun can help make your operation more effective and profitable. Check these advantages. Adjustable

More information

STRAIGHT BLADE PLUGS & CONNECTORS

STRAIGHT BLADE PLUGS & CONNECTORS STRAIGHT BLADE PLUGS & CONNECTORS Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire. See-through, thermoplastic terminal chamber for clear view of terminals and wire connections.

More information

OFFICE & WARDROBE HANGING RAILS AND FITTINGS 696 HANGERS AND STORAGE 700 DESK CABLE COVERS 705 FURNITURE LEGS 706 DESK LOCKS 707 CASTORS 711

OFFICE & WARDROBE HANGING RAILS AND FITTINGS 696 HANGERS AND STORAGE 700 DESK CABLE COVERS 705 FURNITURE LEGS 706 DESK LOCKS 707 CASTORS 711 OFFICE & WARDROBE HANGING RAILS AND FITTINGS 696 HANGERS AND STORAGE 700 desk KEYBOARD TRAY 704 DESK CABLE COVERS 705 FURNITURE LEGS 706 DESK LOCKS 707 CASTORS 711 FILE ACCESSORIES 714 CD & DVD HOLDER

More information

Parts Manual SERIES CVT Lawn Tractor. Model LT1040 CUB CADET LLC, P.O. BOX CLEVELAND, OHIO PRINTED IN U.S.A.

Parts Manual SERIES CVT Lawn Tractor. Model LT1040 CUB CADET LLC, P.O. BOX CLEVELAND, OHIO PRINTED IN U.S.A. Parts Manual CVT Lawn Tractor SERIES 000 Model LT00 PRINTED IN U.S.A. CUB CADET LLC, P.O. BOX CLEVELAND, OHIO -00 FORM -00C.fm (//00) SERIES 000 CVT LAWN TRACTORS TABLE OF CONTENTS DESCRIPTION PAGE Axle,

More information

XL12 Chain Saw UT Page 1 of 21 Carburetor Chamber

XL12 Chain Saw UT Page 1 of 21 Carburetor Chamber XL12 Chain Saw UT-10080 Page 1 of 21 Carburetor Chamber XL12 Chain Saw UT-10080 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-

More information

Double Magnetic Aluminum Catch. Magnetic Catch. E.Z. Flex Elbow Catch. Magnetic Catch. Magnetic Catch. Flex Catch. Magnetic Catch Tan plastic

Double Magnetic Aluminum Catch. Magnetic Catch. E.Z. Flex Elbow Catch. Magnetic Catch. Magnetic Catch. Flex Catch. Magnetic Catch Tan plastic Double Magnetic Aluminum Catch Aluminum finish (2) #6 truss head x 1/2 ; Aluminum wood look finish (2) #6 truss head x 1/2 ; Length Width Height Strike AMBP33772AL 1[½] [ 13 / 16] [½] 1[¼] L x [⅞] W 25

More information

Closet Door Hardware. Bi-Fold Closet Door Pin Assemblies. Leigh/Monarch. Peachtree. National. National. Fenestra. Leigh/Monarch.

Closet Door Hardware. Bi-Fold Closet Door Pin Assemblies. Leigh/Monarch. Peachtree. National. National. Fenestra. Leigh/Monarch. Bi-Fold Closet Door Pin Assemblies In Order by Pin Diameter & Height 1/4" DIAMETER Assembly # 900-9421 Assembly # 1-250 Assembly # 1-161 Assembly # 1-159 Assembly # 1-131 Assembly # 1-145 Assembly # 1-145A

More information

PARTS LIST PONY 20 SCA

PARTS LIST PONY 20 SCA PARTS LIST PONY 20 SCA WIRING DIAGRAM PART NO. PART DESCRIPTION 4990601 GEARMOTOR - 120 VOLT 4990581 GEARMOTOR - 240 VOLT 4890391 VAC MOTOR - 115 VOLT 4891251 VAC MOTOR - 240 VOLT 4991321 BRUSH MOTOR -

More information

Reproduction. Not for 21"STEEL DECK WALK BEHIND MOWERS SERIES 20. Parts Manual for

Reproduction. Not for 21STEEL DECK WALK BEHIND MOWERS SERIES 20. Parts Manual for Parts Manual for SERIES 20 Model No. Description 7800428 2167520B 7800596 217020B 7800841 217520B 7800437 N2167520B 7800600 N217020B 7800438 NP2167520B 7800601 NP217020B 7800692 NP2187520 7800771 NP2187520

More information

Castle Model TSM-35. Heavy Duty Screw Pocket Machine. For Models with Serial Number and Above Items Included with Machine

Castle Model TSM-35. Heavy Duty Screw Pocket Machine. For Models with Serial Number and Above Items Included with Machine Castle Model TSM-35 Heavy Duty Screw Pocket Machine For Models with Serial Number 63658 and Above Items Included with Machine Part No. Description Qty B02964 9/64" Castle Premium Brad Point Drill Bit w/

More information

SECTION METAL LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines.

SECTION METAL LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines. Section 10_51_13_MetalLockerPenco-ProTough_8-19-09 PART 1 GENERAL SECTION 10 51 13 METAL LOCKERS 1.01 SECTION INCLUDES A. Heavy Duty Welded Tubular Frame Lockers. B. Locker benches. 1.02 REFERENCES A.

More information

408, 408A, 410, 410A, 512 SERIES

408, 408A, 410, 410A, 512 SERIES OWNER'S MANUAL OWNER'S MANUAL 408, 408A, 410, 410A, 512 SERIES 408, 408A, 410, 410A, 512 SERIES INSTALLATION, OPERATION, MAINTENANCE & PARTS INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including

More information

WifiTrax WMR-10 in Atlas RS-3

WifiTrax WMR-10 in Atlas RS-3 WifiTrax WMR-10 in Atlas RS-3 How to Install the WifiTrax WMR -10 Board Replacement Wi-Fi Controller in Atlas RS-3 Locomotive Practical notes by Steve Shrimpton Back to Web Site In my opinion the Alco

More information

J Parts catalog

J Parts catalog J-00 English version EDITION - 0/007 CODE - 979 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 50 750-000 - Pompéia - SP - Brasil Tel.: +55 05-00 - Fax: +55 5 0 E-mail: export@jacto.com.br

More information

Mobtown Offroad Toyota Tacoma Bolt On Rock Slider Installation Instructions

Mobtown Offroad Toyota Tacoma Bolt On Rock Slider Installation Instructions Mobtown Offroad 2005+ Toyota Tacoma Bolt On Rock Slider Installation Instructions Tools Needed: 9/16 Box Wrench 9/16 Standard and Deep Well Socket, 3/8 Drive Ratchet, 3/8 Drive 3/4 Standard Socket 3/4

More information

Numatic International Spare Parts Model No:TTQ1535 CHASSIS ASSEMBLY DRAWING: EXP523 ISS:A04 21/11/2002

Numatic International Spare Parts Model No:TTQ1535 CHASSIS ASSEMBLY DRAWING: EXP523 ISS:A04 21/11/2002 Model No:TTQ CHASSIS ASSEMBLY 09 DRAWING: EXP53 ISS:A04 1/11/00 7 6 45 6 8 46 16 10 69 11 1 61 13 68 58 5 57 17 14 67 66 65 9 5 9 75 75 75 4 40 43 74 8 19 6 6 5 3 4 8 3 8 4 51 1 0 1 70 68 63 64 55 56 56

More information

Model 10 Crossing Signal

Model 10 Crossing Signal 1-39 Model Crossing Signal 1-40 Model Gate Crossing Signal For use with Cantilever Flashing Light Structures, or as a Sidewalk Gate 1-41 Mechanism Support for Model Gate Signals Cast Mechanism Support

More information

PARTS LIST ELECTRIC CHARGER 2500

PARTS LIST ELECTRIC CHARGER 2500 PARTS LIST ELECTRIC CHARGER 2500 120 VOLT WIRE DIAGRAM SEE HANDLE ASSEMBLY FOR COMPONENT NUMBERS 240 VOLT SEE HANDLE ASSEMBLY FOR COMPONENT NUMBERS MOTOR ASSEMBLY ITEM PART NO. PART DESCRIPTION QTY. 5298001

More information

HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES

HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES BFV-2 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Rev. 09/09 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Now you can turn high pressure applications into low risk decisions by turning to high performance

More information

Technical Publications. Winches. Parts Manual. First Edition, First Printing Part No

Technical Publications. Winches. Parts Manual. First Edition, First Printing Part No Technical Publications Winches Parts Manual First Edition, First Printing Part No. 35503 Genie Industries has endeavored to deliver the highest degree of accuracy possible. However, continuous improvement

More information