Avex Series Countersunk Head. B Dia

Transcription

1 RIVTS & FSTRS vex vex is a versatile breakstem fastener for use with a wide variety of material including metal, plastic and wood Wide grip range Fast installation from one side of the workpiece Good hole fill and positive stem retention Installed with high speed, portable power tools with swivel and right-angled heads when access is difficult vex Series Countersunk Head 120 o luium 2.5% agnesium lloy 5052 (plain finish) Stem: ow Carbon Steel (zinc coated) om Part o. Range ia. ia dia ox 3.2 V1604/ V1604/ V1604/ V1604/ ox vex Series ow Profile Head luium 2.5% agnesium lloy 5052 (plain finish) Stem: ow Carbon Steel (zinc coated) om Part o. Range ia. ia Coseley: Tel: +44 (0) Fax: +44(0) website: sales@cbf.uk.com dia ox 3.0 V1661/ V1661/ V1661/ V1661/ V1661/ V1661/ V1661/ V1661/ V1661/ V1661/ V1661/ ox 197 Section 2

2 RIVTS & FSTRS vex Series arge Flange luium 2.5% agnesium lloy 5052 (plain finish) Stem: ow Carbon Steel (zinc coated) om dia Part o. Range ia. ia ox ox V1641/ V1641/ V1641/ vinox - 61 Series Stainless Steel reakstem ody: 304 Grade Stainless Steel (bright finish) Stem: 321 Grade Stainless Steel (plain finish) om Part o. Range ia. ia dia ox ox V61/ V61/ V61/ V61/ V61/ V61/ V61/ V61/ V61/ For the latest product updates please visit our website: Coseley: Tel: +44 (0) Fax: +44 (0) website: & flush-tech.com sales@cbf.uk.com

3 RIVTS & FSTRS vtainers high quality fastener designed specifically for joining plywood or glass reinforced plastics to metal frag without damaging the materials or pulling through the composition Vibration and moisture resistant Suitable for varying hole tolerances vtainers Series S T Pin & Shell: ow Carbon Steel (zinc plated) Seal: ylon (natural finish) ocking Slug: Polyester lastomer (natural finish) 4.19 vtainers & do not have shouldered pins. Under no circumstances should head of pin be placed directly against container board Shell om 10 Part o. Range S T ox ox nom V2311/ / V2311/ / V2311/ V2311/ V2311/ V2311/ V2311/ V2311/ V2311/ V2311/ V2311/ V2311/ vtainer Shell ssembly (includes ocking Slug) 22.9 dia. shell (Part o. V ) must not be used directly against container board - only against metal surfaces. For dhesive/sealants please see pages Section 2 Part o. dia ox ox V2321/ V2325/ Coseley: Tel: +44 (0) Fax: +44(0) website: sales@cbf.uk.com 199

4 RIVTS & FSTRS ulbex - F01 Series ulbex is an all aluium corrosion resistant fastener. esigned for assemblies using soft, brittle and thin materials. uring installation the fastener collapses outwards forg three large tail segments. These spread the clamp load over a large surface area at the same time providing grip and strength. For use with plastics, thin gauge materials, insulation fibreboard and fibreglass Choice of coloured snap-on caps for matching finish luium lloy 5251 (natural finish) Stem: luium lloy 5251 (natural finish ) a om 4.0 Part o. Range ia ox VF01/ VF01/ VF01/ VF01/ VF01/ ox K.T.R Series high strength, all aluium alloy fastener with a very large blind size area against the rear sheet. Ideal for GRP & thin sheet materials Water-resistant neoprene seal l luium lloy (brightened finish) Stem: luium lloy (natural finish) a Seal om Part o. Range ia. ia Coseley: Tel: +44 (0) Fax: +44 (0) website: & flush-tech.com sales@cbf.uk.com ox VKTR06W/ VKTR06W/ VKTR06W/ VKTR06W/ VKTR08W/ VKTR08W/ ox

5 RIVTS & FSTRS T-ok - 01 Series T-ok produces a positive, efficient and cost effective method of assembly C For applications involving joining metal to wood, GRP, plastics, rubber and glass fibre materials High resistance to pull-out loads ody: ow carbon steel (zinc plated & gold passivated) Stem: ow Carbon Steel (zinc plated) V * V = etal face thickness om 4.3 Part o. dia ia. C ia dia V ox ox V01/ V01/ V01/ V01/ S.R. Sealed Rivet - SR01 Series Sealed and corrosion resistant locked stem fastener ir and water resistant seal Operates efficiently with oversize or elongated holes ody: luium 5% agnesium lloy 5052 (natural finish) Stem: ow Carbon Steel (phosphated) om Part o. Range ia ia ox ox VSR01/ VSR01/ VSR01/ VSR01/ VSR01/ VSR01/ VSR01/ VSR01/ Coseley: Tel: +44 (0) Fax: +44(0) website: sales@cbf.uk.com 201 Section 2

6 rivets & fasteners vdelok high strength, vibration resistant bolt-type fastener For applications demanding durable high quality assemblies vailable with various adaptors and nose extensions liates problems associated with loose nuts, lock nuts, bolts and solid rivets Pin: Carbon oron Steel (zinc plated finish) Collar: ow Carbon Steel (zinc plated) vdelok olts Series l range shown is with a full collar. Use of half collar increases the grip range to that of the next longest pin. 6.4 Pin Part o. Range om om ox ox V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ Pin: Carbon oron Steel (zinc plated) Collar: ow Carbon Steel (zinc plated) vdelok olts Series 90 o Countersunk Head Type Pin Part o. Range om om ox ox V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ V2611/ l Pin Part o. Range ox ox om om V2612/ V2612/ V2612/ V2612/ range shown is with a full collar. Use of half collar increases the grip range to that of the next longest pin. Coseley: Tel: +44 (0) Fax: +44 (0) website: & flush-tech.com sales@cbf.uk.com

7 RIVTS & FSTRS k S vdelok Full Collars Series To suit 2611/2612 ow Carbon Steel (zinc plated) k s H J 2611 H J 2612 om Part o. H Rad ax J ax K ax S ax ox V2662/ V2662/ V2662/ V2662/ ox a K t vdelok Flange Collars Series To suit 2611/2612 ow Carbon Steel (zinc plated) a K t U S b H p J 2611 H p J 2612 om Part o. H Rad ax J ax K ax P ax S ax T ax U ax ox V2615/ V2615/ V2615/ V2615/ ox IPORTT: Zinc plating is only classed as a sacrificial coating (gives itself up to the corrosive media). protective barrier (i.e. paint) is recoended to protect against moisture CF cannot be held responsible for the effects of corrosion on zinc plated parts Section 2 Coseley: Tel: +44 (0) Fax: +44(0) website: sales@cbf.uk.com 203

8 RIVTS & FSTRS axlok versatile fastener with an extensive grip range. Swageing of the collar into the locking grooves ensures a high quality fastening. Coon grip and break grooves along the pin allow flush break-off during installation axlok olts Series razier Head R Pin: edium Carbon, High anganese Steel Collar: ow Carbon Steel (zinc plated & passivated)) H a b om 6.4 Part o. dia b ia H R a Ref ox ox Range Ref rad V1901/ V1901/ V1901/ V1901/ axlok olts Series 90 o Countersunk Head R Pin: edium Carbon, High anganese Steel Collar: ow Carbon Steel (zinc plated & passivated)) F H om Part o. Range dia ia H dia F ox ox nom rad V1902/ V1902/ reserve the right to alter and amend product specifications without prior notice. ll specifications, weights and dimensions printed in this catalogue are intended as a guide only ny fixings therefore should not be detered until relevant goods are received on site. 204 Coseley: Tel: +44 (0) Fax: +44 (0) website: & flush-tech.com sales@cbf.uk.com

9 RIVTS & FSTRS axlok olts Series ushroom Head R b a Pin: edium Carbon, High anganese Steel Collar: ow Carbon Steel (zinc plated & passivated) b h om 6.4 Part o. Range dia b Ref H R a Ref ox ox Ref rad V1903/ V1903/ V1903/ V1903/ p k axlok Flanged Collars Series To suit 1901/1902/1903/1905 t s j Part o. J K P Ref S T ox ox V1981/ V1981/ For oad Restraint Tracks For Steel, Plastic, luium and Stainless Steel Toolboxes For Side Guard Systems Section 2 see page 175 see pages see pages Coseley: Tel: +44 (0) Fax: +44(0) website: sales@cbf.uk.com 205

10 RIVTS & FSTRS onobolt high performance flush break fastener designed to build-in strength, security, quality and cost saving benefits for the most demanding assembly requirements onobolt Series Protruding Head ody & Stem: ustenitic stainless steel modified by addition of 3%-4% copper 2 1 T is the imum clearance behind sheet to any obstruction is over uncrimped portion of body imited Rear Clearance T o Rear Obstruction om Part o. Range dia 1 2 T ox ox V2711/ V2711/ V2711/ V2711/ onobolt Series Countersunk Head ody: Carbon Steel (zinc plated) Stem: Carbon Steel (zinc plated clear trivalent passivated) 2 1 T is the imum clearance behind sheet to any obstruction is over uncrimped portion of body imited Rear Clearance T o Rear Obstruction om Part o. Range dia 1 2 T ox ox 6.35 V2761/ Coseley: Tel: +44 (0) Fax: +44 (0) website: & flush-tech.com sales@cbf.uk.com

11 RIVTS & FSTRS 2 imited Rear Clearance T onobolt Series Protruding Head 1 o Rear Obstruction ody: Carbon Steel (zinc plated) Stem: Carbon Steel (zinc plated clear trivalent passivated) T is the imum clearance behind sheet to any obstruction is over uncrimped portion of body om Part o. Range dia 1 2 T ox V2771/ V2771/ V2771/ V2771/ V2771/ Hemlok high performance fastener designed to meet the requirements of manufacturing industries using thin gauge back sheet materials in product assemblies. Provides high strength and good clamp-up without deforg thin sheet metal. The salient feature is the large load bearing tail formation ox Hemlok Series ody: edium Carbon Steel Stem: Carbon oron Steel om 6.35 Part o. Range dia Ref ox ox V2221/ V2221/ V2221/ V2221/ V2221/ V2221/ Coseley: Tel: +44 (0) Fax: +44(0) website: sales@cbf.uk.com 207 Section 2

12 RIVTIG TOOS ngsis Range Robust Power Tools For reakstem Fasteners vdel s ngenesis tool range comprises of high performance, lightweight hydro-pneumatic handtools for breakstem rivets. The tough construction allows for swift placement whilst the light design reduces operator fatigue. With an increased lifespan and low air consumption the ngenesis tool range is fast becog an invaluable tool in every assembly line. vailable as standard with a fixed stem collector bottle 208 Quick release stem collector Soft rubber insert & dual air intake Integral cycle counter Increased structural integrity Specially toughened plastic body & heavy Features duty rubber base ightweight tool Toughened plastic body and heavy duty rubber base Optional quick release or fixed stem collector bottle Vacuum air supply cut-off on trigger nhanced tool life Soft rubber grip on handle Integral cycle counter (except ng 1 & ng2-s) ng1, and ng2-s feature a quick release nose assembly ng1 odel Fastener Fastener s Type vex vinox ulbex T-ok Sealed Rivet Stavex vi-ulb ng3 odel Fastener Fastener s Type vex vinox vtainer ulbex onobolt S R Rivet T-ok TR Interlock Stavex vi-ulb Placing atrix Robust construction of head Quick release nose equipment Tapered nose casing Trigger enefits Reduces operator fatigue High placement speed Robust tool inimized air consumption Reduced time to empty stem collector Places a wide range of fasteners rgonomic ng2 & ng2/s odels Fastener Fastener s Type vex vinox ulbex onobolt S R Rivet T-ok TR vi-ulb ng4 odel Fastener Fastener s Type vex vdelok vinox vtainer ulbex Hemlok axlok Q-Rivet Stavex T-ok TR Coseley: Tel: +44 (0) Fax: +44 (0) website: & flush-tech.com sales@cbf.uk.com

13 riveting tools One of the lightest tools in the ngenesis range. With a quick cycle time and the ability to install a variety of rivets the ng1 offers invaluable multi-functionality whilst maintaining ease of use Part o. VG1 Weight (without nose assembly) 1.50 Weight (. with equip.) 1.70 Pull 5.5 bar 6.0k Stroke (.) 14 Cycle time (approx.) 0.9 sec ir supply pressure 5-7 bar ( psi) Free air 5.5 bar 1.2 litres oise level <75 d() Vibration <2.5 m/s 2 Placing capability Up to (3/16") aluium rivets and up to 4.0 (5/32") steel breakstem rivets produced by vdel. Can also place vseal II 4 and 5 sealing plugs ng1 ng2 Features the quickest cycle time in the ngenesis range. With an integral cycle counter and the ability to take a wide range of rivet sizes the ng2 is a valuable tool in the range Part o. VG2 Weight (without nose assembly) 1.98 Weight (. with assembly) 2.10 Pull 5.5 bar 9.34 k Stroke (.) 17 Cycle time (approx.) 0.8 sec ir supply pressure 5-7 bar ( psi) Free air 5.5 bar 2.1 litres oise level <75 d() Placing capability Up to (3/16") breakstem rivets produced by vdel. Can also place vseal II sealing plugs up to 7 ng3 llows the placement of a large range of breakstem rivets, lockbolts and sealing plug sizes. With an intergrated counter this tool can be used for a variety of applications and enable you to keep track of your progress Part o. VG3 Weight (without nose assembly) 2.25 Weight (. with assembly) 2.30 Pull 5.5 bar 12.9 k Stroke (.) 26 Cycle time (approx.) 1.2 sec ir supply pressure 5-7 bar ( psi) Free air 5.5 bar 4.3 litres oise level <75 d() Vibration <2.5 m/s 2 Placing capability ll breakstem rivets produced by vdel up to 6.4 (1/4") except vibulb 6.4 (1/4") and Hemlok structural fasteners. Can also place vseal II sealing plugs up to 9 & vtainer lockbolts 10.0 ng4 Offers the capability to fit some of the larger rivets in vdel s portfolio. Its ergonomic design and reinforced structure make the ng4 tool easy to use yet tough enough to endure any assembly line Part o. VG4 Weight (without nose assembly) 2.28 Weight (. with equip.) 2.30 Pull 5.5 bar k Stroke (.) 17 Cycle time (approx.) 1.2 sec ir supply pressure 5-7 bar ( psi) Free air 5.5 bar 4.3 litres oise level <75 d() Vibration <2.5 m/s 2 Placing capability Up to 6.4 (1/4") breakstem rivets produced by vdel except Interlock & onobolt structural rivets. Can also place vseal II sealing plugs up to 12, vtainer lockbolts 10 (3/8"), vdelok & axlok lockbolts (3/16 ) & 6.4 (1/4"), Hemlok structural rivets 6.4 (1/4") Coseley: Tel: +44 (0) Fax: +44(0) website: sales@cbf.uk.com 209 Section 2

14 RIVTIG TOOS ng2-s The lightest of the tools in the ngenesis range, this combined with a quick cycle time leads to improved operator fatigue. The ng2-s tool also has the option of a quick release stem bottle, speeding up the riveting process Part o. VG2/S Head weight (without nose equip.) 1.1 Head weight (. with equip.) 1.2 Pull 5.5 bar k Stroke (.) 17 Cycle time (approx.) 1 sec ir supply pressure 5-7 bar Free air 5.5 bar 3.6 litres oise level <75 d() Vibration <2.5 m/s 2 Placing capability Up to (3/16") breakstem rivets. Can also place vseal II sealing plugs up to 7 Placing atrix 722 Tool Fastener Fastener s Type vdelok onobolt Ø Hydro Pneumatic Power Tool Heavy uty, Cast luium ody power tool capable of withstanding the toughest production lines. The 722 series has been designed to be quick to use and operator friendly, reducing fatigue whilst installing an assorment of fastenings. Part o. V722/ Weight (without nose equip.) 5.0 Pull force k Stroke 19 Cycle time (approx.) 3 sec Overall height 387 ength without nose equip, 213 Overall width base & air supply hose 146 Free air volume 14.6 litres oise level d() 72 azytong lind Rivet Tool o. R /T Cast aluium tool body for heavy duty use over long periods of time Quick and simple to operate, imising operator fatigue and reducing assembly time Wide choice of nose assemblies to suit varying application requirements including softer materials and wood Places vdelok structural lockbolts from (3/16") to 9.6 (3/8") and 9.6 (3/8") onobolts ong-rm lind Rivet Tool o. R / 2.05 Ø lind Rivets Ø 117 Placing atrix aterials luium Steel Stainless lind Rivets Ø Placing atrix aterials luium Steel Stainless Coseley: Tel: +44 (0) Fax: +44 (0) website: & flush-tech.com sales@cbf.uk.com