TRANSPORT & 4WD EQUIPMENT

Size: px

Start display at page:

Download "TRANSPORT & 4WD EQUIPMENT"

Andra Payne
5 years ago
Views:

6 TRANSPORT & 4WD EQUIPMENT TIRFOR WIRE ROPE WINCHES...133 LOAD CHOKER LOAD RESTRAINTS...134 SYNTHETIC TOW SLINGS...134 TRANSPORT CHAIN & FITTINGS...135 LOAD RESTRAINT KITS.

1 6 TRANSPORT & 4WD EQUIPMENT TIRFOR WIRE ROPE WINCHES LOAD CHOKER LOAD RESTRAINTS SYNTHETIC TOW SLINGS TRANSPORT CHAIN & FITTINGS LOAD RESTRAINT KITS RATCHET LOAD BINDERS WEB DOGS & TRUCK WINCHES RATCHET TIE DOWNS OFF-ROAD BLOCKS WD RECOVERY STRAPS & KITS TRANSPORT & 4WD EQUIPMENT

2 Tractel Industry leading solutions in: Lifting & handling Load measurement & control Suspended access Height safety Proud supplier to the Global Lifting Group

Advantages: Works in any position - horizontal, vertical or angled Unlimited length of wire rope Increase the nominal capacity with multiple sheave blocks Fast and easy installation Simple to feed in

3 TIRFOR T 500 WIRE ROPE WINCHES Tirfor lifting and pulling machines are lever operated hoists using a separate wire rope. One-man operated using a telescopic handle, they can work in any position and over any height of lift. They can replace conventional winches and other hoists for many applications. Advantages: Works in any position - horizontal, vertical or angled Unlimited length of wire rope Increase the nominal capacity with multiple sheave blocks Fast and easy installation Simple to feed in or remove wire rope Continuous operation without snatching Reduced maintenance by simple cleaning and regular lubrication Changeover from forward to reverse operation by transferring the handle from one lever to another High mechanical advantage Safety device to prevent overloading Capacity Wire Rope W/R Effort Rope Travel Forward Reverse Unit Model kg Diam mm Construction Forward kg Reverse kg mm mm Weight T508D K5xK19S-SFC Galv 1960 B sz T516D K4xK26WS-SFC Galv 1960 B sz T532D K6xK36WS-SFC Galv 2160 B sz WINCH MASTER WIRE ROPE WINCHES MODEL CODE TIR08WM TIR16WM TIR32WM Lifting Capacity (kg) Rated Pulling Capacity (kg) Rope Advance per Full Stroke (mm) Lever Pull at WLL (kg) Rope Diameter (mm) Standard Length of Wire Rope (m) Net Weight Without Cable (kg) Overall Length of Body (mm) Overall Height of Body (mm) Overall Width of Body (mm) Model Code WPH-08 WPH-16 WPH-32 Rated Lifting Capacity (tonnes) Rated Pulling Capacity (tonnes) Rope advance per full stroke cycle (mm) >52 >55 >28 Operating effort at rated load (kg) Telescopic handle length (mm) Anchor Pin diameter (mm) Net weight without rope (kg) Diameter of wire rope (mm) Wire rope construction 6x19S-IWRC 6x19S-IWRC 6x19S-IWRC Standard wire rope length (m) Net weight of wire rope and collector (kg) Capacities : 800kg, 1600kg and 3200kg Extremely versatile to safely lift, pull, lower or stretch loads over long distances. Can be used in horizontal, vertical or angled positions. Lightweight, portable and compact design. High strength housing made of corrosion free alloy steel plate with durable chrome finish to protect against rust. All internal components galvanised to minimise corrosion. Unique wire rope reeler for easier and safer rope storage. The rope gripping system is easily disengaged with a lever, allowing smooth installation of the wire rope. The reliable parallel gripping system has a large surface contact area providing an evenly distributed grip at a lower force, and hence less rope wear. Built in overload protection by a shear pin arrangement in the forward lever. Broken shear pins can be replaced without removing the load. Spare shear pins are conveniently placed in the end of rubber sleeve of telescopic handle for TIR08WM, and in the carrying handle for TIR16WM and TIR32WM. Equipped with an anchor bolt, offering numerous connection possibilities with wire ropes and chain slings. Swivel hooks can replace anchor bolts as required. TITAN WIRE ROPE WINCHES 133

LOAD CHOKER The Load Choker is a new and exciting solution to the problem of safely restraining difficult loads such as loose packs of steel or timber.

The use of Load Choker offers a major reduction in tie down time whilst significantly reducing OH&S risk.

Zinc passivated finish for long service life. Rolled edges to maximise service life of straps.

Significantly faster unloading times, particularly with multiple deliveries. Far greater restraint ability in emergency situations.

CHAIN MODEL Load Capacity: 4000kg Proof Tested to Exceed: 8000kg Product Code: LC08 (transport chain type) COMLIES WITH AS/NZS 4344 GLOBAL SYNTHETIC TOW

4 LOAD CHOKER The Load Choker is a new and exciting solution to the problem of safely restraining difficult loads such as loose packs of steel or timber. It has the ability to maintain pressure and choke the load to restrict movement in all directions. The use of Load Choker offers a major reduction in tie down time whilst significantly reducing OH&S risk. Models are available to suit transport webbing or chains. Drop forged alloy steel for strength and durability. Zinc passivated finish for long service life. Rolled edges to maximise service life of straps. Huge improvement over traditional belly strap method as it creates even tension around load. Significantly faster unloading times, particularly with multiple deliveries. Far greater restraint ability in emergency situations. LS50 50mm STRAP MODEL Load Capacity: 2500kg Proof tested to exceed: 5000kg Product Code: LS50 (webbing strap type) COMPLIES WITH AS/NZS 4380 LC08 8mm CHAIN MODEL Load Capacity: 4000kg Proof Tested to Exceed: 8000kg Product Code: LC08 (transport chain type) COMLIES WITH AS/NZS 4344 GLOBAL SYNTHETIC TOW SLING 6m or 10m lengths Light weight Comes complete with shackles and heavy duty storage bag Specifications Guide to the gross vehicle weight to be recovered Tow Sling Minimum Severely Medium Slippery Capacity Breaking Load Bogged Bogged Surface 8 Tonne 21 Tonne 8 Tonne 16 Tonne 32 Tonne 20 Tonne 56 Tonne 20 Tonne 40 Tonne 80 Tonne 25 Tonne 70 Tonne 25 Tonne 50 Tonne 100 Tonne 50 Tonne 140 Tonne 50 Tonne 100 Tonne 200 Tonne 134

bucket or toolbox LOAD RESTRAINT KIT Load

length) x 8mm Grade 70 transport chain in

FOR LIFTING PURPOSES RATCHET LOAD BINDERS

5 TRANSPORT CHAIN & FITTINGS Grade 70 transport chain and fittings, gold coloured. COMPLIES WITH AS 4344 Supplied in poly bucket or toolbox LOAD RESTRAINT KIT Load restraint kits consist of 9m (effective length) x 8mm Grade 70 transport chain in zinc-dichromatic (gold) finish, complete with Grade 70 clevis cradle type grab hooks at each end, contained in a handy carry box. COMPLIES WITH AS/NZS 4344 NOT TO BE USED FOR LIFTING PURPOSES RATCHET LOAD BINDERS Ratchet Loadbinders are an effective way to restrain heavy loads in transport applications, with winged grab hooks ensuring that secure full lashing capacity is achieved. To suite chain sizes 6,8,10 and 13 mm. 135

SPANSET WEB DOG SpanSet Web Dog - The safe alternative to loadbinders (with tension force indicator) Web Dogs overcome the dangerous kick-back associated with loadbinders.

6 SPANSET WEB DOG SpanSet Web Dog - The safe alternative to loadbinders (with tension force indicator) Web Dogs overcome the dangerous kick-back associated with loadbinders. Add the safety of ABS step-by-step release and the ability to apply pre-tension and the Web Dog is a clear winner. 50mm yellow webbing assembly fitted with 8mm swivel grab hook each end. BlueScope and OneSteel approved. Features: Pre-tension: 1600kg, length: 1m Controlled release - allows pre-tension force to be released in small steps Self-locking ratchet handle - prevents ratchet handle jumping out Double latch - allows for more tension in less time Durable in all conditions Tension force indicator - allows operator to check the amount of force being applied to the load Extended handle for greater leverage Ample tension - Less than 10% stretch under full tension, meaning no unnecessary retensioning during operation Reverse action ratchet - maximises ergonomic efficiency TRUCK WINCHES Supplied bare or fitted with webbing straps, our truck winches exceed the demanding needs for lashing. Available in clip-on, slide-on or gate types. Replacement straps available in 9m lengths. Other sizes available upon application. 136

TITAN WEB RATCHET TIE DOWNS All ratchet assembly units come with hook and keeper*, wear sleaves, compliance

* Does not apply to endless types COMPLIES WITH AS 4380 Webbing Lashing CODE Description Colour Size

5m) 750kg 1500kg WRS356 Ratchet Tie Down Red 35mm X 6m (EL = 6.

5m) 2500kg 5000kg WRS509-25BPH Ratchet Tie Down c/w Black Plastic Handle Blue 50mm X 9m (EL = 9.

5m) 2500kg 5000kg WRS5011-25 Ratchet Tie Down Blue 50mm X 11m (EL = 11.

5m) 5000kg 10000kg WRS256E Ratchet Tie Down Endless Strap Black 25mm X 6m 750kg 3000kg WRS506-25E Ratchet

7 TITAN WEB RATCHET TIE DOWNS All ratchet assembly units come with hook and keeper*, wear sleaves, compliance certification and a clear plastic protective cover over the caution/lashing capacity tag. * Does not apply to endless types COMPLIES WITH AS 4380 Webbing Lashing CODE Description Colour Size Capacity MBL WRS255 Ratchet Tie Down Blue 25mm X 5m (EL = 5.5m) 750kg 1500kg WRS356 Ratchet Tie Down Red 35mm X 6m (EL = 6.5m) 1500kg 3000kg WRS Ratchet Tie Down Blue 50mm X 9m (EL = 9.5m) 2500kg 5000kg WRS509-25BPH Ratchet Tie Down c/w Black Plastic Handle Blue 50mm X 9m (EL = 9.5m) 2500kg 5000kg WRS509-25R Ratchet Tie Down Reverse Action Blue 50mm X 9m (EL = 9.5m) 2500kg 5000kg WRS Ratchet Tie Down Blue 50mm X 11m (EL = 11.5m) 2500kg 5000kg WRS759-5 Ratchet Tie Down Orange 75mm X 9m (EL = 9.5m) 5000kg 10000kg WRS256E Ratchet Tie Down Endless Strap Black 25mm X 6m 750kg 3000kg WRS506-25E Ratchet Tie Down Endless Strap Black 50mm X 6m 2500kg 10000kg WRS509-5E Ratchet Tie Down Endless Strap Black 50mm X 9m 2500KG 10000KG (EL) = Effective Length RTD: LC 750kg 25mm X 5m (EL = 5.5m) RTD: LC 1.5t 35mm X 6m (EL = 6.5m) RTD: LC 2.5t 50mm X 9m (EL = 9.5m) RTD: LC 5t 75mm X 9m (EL = 9.5m) RTD: LC 2.5t 50mm X 9m (EL = 9.5m) C/w black plastic moulded grip handle Endless Type RTD 137

4WD RECOVERY STRAPS Tree Trunk Protectors To be used around the base of a tree only. Use this in conjunction with a winch extension strap.

Sizes: Standard Tree Trunk Protector - 75mm x 3 metre Standard Tree Trunk Protector - 75mm x 6 metre Heavy Duty Tree Trunk Protector - 90mm x 4 metre Rating 8,000kg breaking load.

Tested and proven as the most popular all rounder and biggest selling strap. Fully protected sewn eyes at both ends for ease of connecting with red line wear indicators woven into the webbing.

5 metre Standard Snatch Strap - 60mm x 9 metre Standard Snatch Strap - 60mm x 12 metre Standard Snatch Strap - 60mm x 15 metre Premium Snatch Strap - 65mm x 10 metre Heavy Duty Snatch Strap - 75mm x

8 4WD RECOVERY STRAPS Tree Trunk Protectors To be used around the base of a tree only. Use this in conjunction with a winch extension strap. Made from hi-tenacity polyester webbing to ensure minimum stretch. Tested and proven as the most popular all rounder and biggest seller. Fully protected sewn eyes at both ends for ease of connecting. Sizes: Standard Tree Trunk Protector - 75mm x 3 metre Standard Tree Trunk Protector - 75mm x 6 metre Heavy Duty Tree Trunk Protector - 90mm x 4 metre Rating 8,000kg breaking load. COMPLIES WITH AS Snatch Straps To be used for recovery of a bogged vehicle only. Made from hi-tenacity nylon webbing to ensure 20% stretch. Tested and proven as the most popular all rounder and biggest selling strap. Fully protected sewn eyes at both ends for ease of connecting with red line wear indicators woven into the webbing. Sizes: Budget Snatch Strap - 50mm x 7.5 metre Standard Snatch Strap - 60mm x 9 metre Standard Snatch Strap - 60mm x 12 metre Standard Snatch Strap - 60mm x 15 metre Premium Snatch Strap - 65mm x 10 metre Heavy Duty Snatch Strap - 75mm x 15 metre Heavy Duty Snatch Strap - 75mm x 9 metre Extra Heavy Duty Snatch Strap - 100mm x 9 metre Rating 8,000kg breaking load. COMPLIES WITH AS Winch Extension Straps To be used only as a winch extension strap. Use this in conjunction with your hand or electric winch. Made from hi-tenacity polyester webbing to ensure minimum stretch. Tested and proven as a must have for any 4WD using a winch. Fully protected sewn eyes at both ends for ease of connecting. Sizes: Standard Winch Extension Strap - 50mm x 10 metre - Green Standard Winch Extension Strap - 50mm x 20 metre - Red Standard Winch Extension Strap - 50mm x 30 metre - Blue Rating 4,000kg Breaking Load. COMPLIES WITH AS TITAN OFF-ROAD BLOCK Max Pulling Diam Diam Of Carton Capacity Of Rope Sheave/Wheel Dimensions N.W./ G.W. Tonne mm mm cm kg 8 11mm x 7 x /

BLACK RAT 4WD RECOVERY GEAR (Snatch-Em) Recovery Strap Minimum Breaking Strain (MBS): 9000kg Length: 9m x 60mm

100% heavy duty nylon webbing with reinforced eyes.

covers for ease of use and have a gold passivated finish.

9 BLACK RAT 4WD RECOVERY GEAR (Snatch-Em) Recovery Strap Minimum Breaking Strain (MBS): 9000kg Length: 9m x 60mm Versatile unit suitable for 4WD recovery, towing, tree trunk protector or extension strap. 100% heavy duty nylon webbing with reinforced eyes. NOT TO BE USED FOR LIFTING Off-Road Block The Black Rat 4WD off-road block has heavy duty one-piece steel side covers for ease of use and have a gold passivated finish. The sheave is made from high grade cast iron with a precision machined groove to accept 11mm wire rope with a pressure grease lubricated bearing. 4WD Safety Recovery Bag Kit Complete kit secured in a sturdy carry bag contains: 4WD 3.2t WLL bow shackles x 2 4WD 4.7t WLL bow shackle 4WD 9m x 50mm snatch strap (9t MBS) 4WD 3m x 75mm tree trunk protector Heavy duty 5m x 25mm ratchet tiedown assembly 4WD off-road block Mesh drying bag Leather safety gloves 139

B L A C K R AT 4 W D 11

B L A C K R AT 4 W D 11 11 Recreational 4 wheel driving should be challenging and enjoyable and for the professional it can be a necessity to get across some wild and difficult terrain, so when you get into a jam you need to