INDEX - ALUMINIUM RANGE HINGES. profile 0.35 N.m. FinAlu continuous hinge 466. profile 0.70 N.m. Aluminium profile continuous hinge - 50 mm

Transcription

1 LUMINIUM RNGE

2 INEX - LUMINIUM RNGE HINGES Finlu continuous hinge 466 luminium profile continuous hinge - 50 mm Rolled knuckle continuous hinge - 20 mm width Rolled knuckle continuous hinge - 25 mm width Spring hinges - aluminium profile 1.3 N.m Spring hinges - aluminium profile 3.80 N.m Spring hinges 50 mm long 473 Opening spring hinges 120 mm long losing spring hinges 120 mm long Rolled knuckle continuous hinge - 30 mm width 467 Small friction hinges - adjustable 475 Rolled knuckle continuous hinge - 35 mm width 468 Large friction hinges - adjustable 475 Rolled knuckle continuous hinge - 40 mm width 468 One way torque hinge - constant torque 9 N.m / set 476 Rolled knuckle continuous hinge - 50 mm width 468 Hi-Klik detent hinges - small 477 Rolled knuckle continuous hinge - 60 mm width 469 Hi-Klik detent hinges - large 477 Rolled knuckle continuous hinge - 80 mm width 469 Soft-close dampening hinges in aluminium 478 Rolled knuckle continuous hinge mm width 469 Round top weld-on aluminium hinges - stainless steel pin - stainless steel washer 479 ouble knuckle continuous hinge 470 luminium profile hinges 480 Spring hinges - aluminium profile 0.20 N.m 471 Heavy duty aluminium profile hinges 480 Spring hinges - aluminium profile 0.35 N.m 471 luminium hinges - 50 mm width 481 Spring hinges - aluminium profile 0.70 N.m 472 luminium hinges with reversed leaves - 50 mm width atalogue 018

3 lean room hinge 65 x 60 mm lean room hinge 100 x 60 mm lean room lift-off hinges 65 x 60 mm luminium lift-off hinges 80 x 80 mm luminium lift-off hinges 100 x 85 mm ESSORIES Flush handle 120 x 91 mm 489 Soft closing recessed hook 490 racket for soft closing recessed hook Spring loaded recessed hook INEX - LUMINIUM RNGE luminium lift-off hinges 100 x 100 mm 484 racket for spring loaded recessed hook 491 Lift-off hinges in aluminium profile with a stainless steel pin 485 luminium mini slides 492 LTHING SYSTEMS Springloaded bolt with locking system in aluminium 486 arrel bolt in aluminium 486 HNLES Rear mounted grab handles 92 and 108 mm 487 Rear mounted grab handles 52 to 120 mm 487 lack aluminium rear mounted grab handles 75 to 150 mm lack aluminium rear mounted grab handles 88 to 120 mm Flush handles 105 x 63.5 mm atalogue

4 luminium range - Hinges ontinuous hinges Finlu continuous hinge ontinuous hinges in aluminium profi le with a small pin diameter. This nice design can be used in many applications (medical, electronic enclosures, food equipment, transportation...). These hinges have the same dimensions as hinges used in the aircraft industry. Part number Material Finish E Pin material Note Weight (g) T5 alu anodised stainless steel undrilled T5 alu raw stainless steel undrilled T5 alu anodised stainless steel undrilled T5 alu raw stainless steel undrilled T5 alu anodised stainless steel undrilled T5 alu raw stainless steel undrilled (E) luminium profile continuous hinge - 50 mm Opening angle 270. Other lengths are available on request. Specifi c drilling requirements are also available on request. Part number Material Finish E Pin material Note Weight (g) T5 alu raw stainless steel undrilled (E) 466 atalogue 018

5 luminium range - Hinges ontinuous hinges Rolled knuckle continuous hinge - 20 mm width Opening angle 270. Other lengths and pin materials are available on request. Specifi c drilling requirements are also available on request. Part number Material Finish E Pin material Note Weight (g) alu raw steel undrilled 117 Rolled knuckle continuous hinge - 25 mm width Opening angle 270. Other lengths and pin materials are available on request. Specifi c drilling requirements are also available on request. Hinge in raw galvanised steel is made of pregalvanised steel. Therefore any cut surface is ungalvanised. Part number Material Finish E Pin material Note Weight (g) alu raw steel undrilled 88 Rolled knuckle continuous hinge - 30 mm width Opening angle 270. Other lengths and pin materials are available on request. Specifi c drilling requirements are also available on request. Part number Material Finish E Pin material Note Weight (g) alu raw aluminium undrilled 205 (F) (E) (S) (G) atalogue

6 luminium range - Hinges ontinuous hinges Rolled knuckle continuous hinge - 35 mm width Opening angle 270. Other lengths and pin materials are available on request. Specifi c drilling requirements are also available on request. Part number Material Finish E Pin material Note Weight (g) alu raw aluminium undrilled 232 Rolled knuckle continuous hinge - 40 mm width Opening angle 270. Other lengths and pin materials are available on request. Specifi c drilling requirements are also available on request. Part number Material Finish E Pin material Note Weight (g) alu raw aluminium undrilled alu raw aluminium undrilled alu raw aluminium undrilled 500 Rolled knuckle continuous hinge - 50 mm width Opening angle 270. Other lengths and pin materials are available on request. Specifi c drilling requirements are also available on request. Part number Material Finish E Pin material Note Weight (g) alu raw aluminium undrilled alu raw aluminium undrilled alu raw aluminium undrilled 612 (F) (E) (S) (G) 468 atalogue 018

7 luminium range - Hinges ontinuous hinges Rolled knuckle continuous hinge - 60 mm width Opening angle 270. Other lengths and pin materials are available on request. Specifi c drilling requirements are also available on request. Part number Material Finish E Pin material Note Weight (g) alu raw aluminium undrilled 998 Rolled knuckle continuous hinge - 80 mm width Opening angle 270. Other lengths and pin materials are available on request. Specifi c drilling requirements are also available on request. Part number Material Finish E Pin material Note Weight (g) alu raw aluminium undrilled 1780 Rolled knuckle continuous hinge mm width Opening angle 270. Other lengths and pin materials are available on request. Specifi c drilling requirements are also available on request. Part number Material Finish E Pin material Note Weight (g) alu raw steel undrilled 2030 (E) atalogue

8 luminium range - Hinges ontinuous hinges ouble knuckle continuous hinge Hinge in aluminium profi le for 180 opening angle. elivered without watertight gasket (to be ordered separately). With fi xed friction washers. Non-drilled hinges. Part number Material Finish K Pin material Weight (g) T5 alu clear anodised stainless steel T5 alu clear anodised stainless steel T5 alu clear anodised stainless steel K Option atalogue 018

9 luminium range - Hinges Hinges with dual function Spring hinges - aluminium profile 0.20 N.m Opening spring force: M(0 ): 0.23 N.m / M(90 ): 0.15 N.m / M(180 ): 0.08 N.m. losing spring force: M(0 ): 0.08 N.m / M(90 ): 0.15 N.m / M(180 ): 0.23 N.m. 2 other versions available: with friction or with detent mechanism. Part number Material Finish Note Weight (g) T5 alu clear anodised opening spring T5 alu black anodised opening spring T5 alu clear anodised closing spring T5 alu black anodised closing spring 10 Ø3.5@ Spring hinges - aluminium profile 0.35 N.m Opening spring force: M(0 ): 0.35 N.m / M(90 ): 0.24 N.m / M(180 ): 0.12 N.m. losing spring force: M(0 ): 0.12 N.m / M(90 ): 0.24 N.m / M(180 ): 0.35 N.m. 3 other versions available: free swinging, with friction or with detent mechanism. Part number Material Finish Note Weight (g) T5 alu clear anodised opening spring T5 alu black anodised opening spring T5 alu clear anodised opening spring/ delivered flat T5 alu black anodised opening spring/ delivered flat T5 alu clear anodised closing spring T5 alu black anodised closing spring 60 Ø Ø atalogue

10 luminium range - Hinges Hinges with dual function Spring hinges - aluminium profile 0.70 N.m Opening spring force: M(0 ): 0.7 N.m / M(90 ): 0.45 N.m / M(180 ): 0.23 N.m. losing spring force: M(0 ): 0.23 N.m / M(90 ): 0.45 N.m / M(180 ): 0.7 N.m. 3 other versions available: free swinging, with friction or with detent mechanism. Part number Material Finish Note Weight (g) T5 alu clear anodised opening spring T5 alu black anodised opening spring T5 alu clear anodised opening spring / delivered flat T5 alu black anodised opening spring / delivered flat T5 alu clear anodised closing spring T5 alu black anodised closing spring 65 Ø Spring hinges - aluminium profile 1.3 N.m Opening spring force: M(0 ): 1.3 N.m / M(90 ): 1.1 N.m / M(180 ): 0.9 N.m. losing spring force: M(0 ): 0.9 N.m / M(90 ): 1.1 N.m / M(180 ): 1.3 N.m. 3 other versions available: free swinging, with friction or with detent mechanism. Part number Material Finish Note Weight (g) T5 alu clear anodised opening spring T5 alu black anodised opening spring T5 alu clear anodised opening spring / delivered flat T5 alu black anodised opening spring / delivered flat T5 alu clear anodised closing spring T5 alu black anodised closing spring 67 Ø Ø Ø atalogue 018

11 luminium range - Hinges Hinges with dual function Spring hinges - aluminium profile 3.80 N.m Opening spring force: M(0 ): 3.80 N.m / M(90 ): 3.10 N.m / M(180 ): 2.40 N.m. losing spring force: M(0 ): 2.20 N.m / M(90 ): 2.90 N.m / M(180 ): 3.50 N.m. Free swinging hinge without spring available (part number: in colorless or in black). Part number Material Finish Note Weight (g) T5 alu clear anodised opening spring T5 alu black anodised opening spring T5 alu clear anodised closing spring T5 alu black anodised closing spring 183 Ø Ø6.2 Spring hinges 50 mm long Opening spring force: M(0 ): 1.5 N.m / M(90 ): 1.1 N.m / M(180 ): 0.65 N.m. losing spring force: M(0 ): 0.25 N.m / M(90 ): 0.65 N.m / M(180 ): 1.1 N.m. Part number Material Finish F G S Note Weight (g) alu raw ezinal steel opening spring alu raw ezinal steel closing spring 22 (F) (G) (S) atalogue

12 luminium range - Hinges Hinges with dual function Opening spring hinges 120 mm long Opening spring force: M(0 ): 0.85 N.m / M(90 ): 0.56 N.m / M(180 ): 0.28 N.m. Stainless steel spring. Part number Material Finish F G S Note Weight (g) alu raw undrilled alu raw drilled 45 F Ø S G losing spring hinges 120 mm long losing spring force: M(0 ): 0.28 N.m / M(90 ): 0.56 N.m / M(180 ): 0.85 N.m. Stainless steel spring. Part number Material Finish F G S Note Weight (g) alu raw undrilled alu raw drilled 45 F Ø S G 474 atalogue 018

13 luminium range - Hinges Hinges with dual function Small friction hinges - adjustable Small size friction hinge to maintain a lid / door in position. The friction torque is adjustable with a hex key. 2 other versions available: with spring or with detent function. full product data sheet is available on our website. Part number Material Finish S Torque Weight (g) T5 alu raw N.m T5 alu clear anodised N.m T5 alu black anodised N.m 10 (S) Large friction hinges - adjustable Large size friction hinge to maintain a lid / door in position. The friction torque is adjustable with a hex key. vailable with a choice of studs or holes. 3 other versions available: with spring, with detent function or free swinging. full product data sheet is available on our website. Part number Material Finish Torque Note Weight (g) T5 alu clear anodised N.m fixing by screw H M T5 alu black anodised N.m fixing by screw H M T5 alu clear anodised N.m fixing by M6 studs T5 alu black anodised N.m fixing by M6 studs 78 Ø Ø atalogue

14 luminium range - Hinges Hinges with dual function One way torque hinge - constant torque 9 N.m / set - luminium torque hinge. - Friction in one direction only: allows for frictionless handling of the door inthe opposite direction. - Tested over 30,000 cycles. - Torque is constant in torque direction. - Sold in pairs (left / right). - Ideal to prevent shock to the door and / or safety. - Torque moment (per set): 9 N.m. - Initial torque may vary from -20% to +40%. - Not suited for vibration environment. - Torque will be affected by temperature. - o not lubricate. - For indoor use only. - ody in aluminium, shaft in stainless steel, sleeve and cover in polyacetal (POM). Part number Material Finish Torque Note Weight (g) aluminium anodised N.m / set aluminium anodised N.m / set torque in the clockwise direction sold in pairs torque in the anti clockwise direction sold in pairs Ø10.5 Ø5.2 Free direction Torque direction Free stop range Range where torque is not effective. Use an external stopper to hold the door () () Installation 476 atalogue 018

15 luminium range - Hinges Hinges with dual function Hi-Klik detent hinges - small Indented every 30. Torque is preset. 2 different versions available: with spring or with friction mechanism. Part number Material Finish Torque Weight (g) T5 alu clear anodised N.m T5 alu black anodised N.m 10 Ø3.5@ Hi-Klik detent hinges - large Indented every torque values. Torque is preset. 3 other versions available: free swinging, with spring or with friction mechanism. full product data sheet is available on our website. Part number Material Finish Torque Weight (g) T5 alu black anodised N.m T5 alu black anodised N.m T5 alu black anodised N.m T5 alu black anodised N.m 106 Ø Ø atalogue

16 luminium range - Hinges Hinges with dual function Soft-close dampening hinges in aluminium - Soft-close dampening hinge: soft-close damper keeps lid from slamming shut when the hinge is put in the open position. - amper working direction: shown by the arrow in the drawing. - Operating angle: If the opening angle is wider than 115 (+/- 5 ), mechanism is broken and damper doesn t work any longer. - Provide a door stopper to prevent from overturning beyond the prescribed angle range. - o not force the door to close faster in damper effective direction. It can cause damage to the product. - When the door opening angle is small, the dampers may not work smoothly. - Torque moment (for one hinge): 2.5 to 4.5 N.m. - Torque calculation: Torque (N.m) = L (m) x 1/2 x W (kg) x 9.8 with: L = door height in metre. W = door weight in kilo. - Operating temperature: 0 to Soft close of a door (vertical application): door closing system. Put together with a spring hinge with same dimension ( or ), an automatic soft close of a door is possible without any other component. Please ask us for more information. Part number Material Finish Torque Note Weight (g) T5 alu clear anodised N.m T5 alu clear anodised N.m amper working direction when opening the hinge amper working direction when closing the hinge Ø Ø atalogue 018

17 luminium range - Hinges Heavy duty hinges Round top weld-on aluminium hinges - stainless steel pin - stainless steel washer Part number Material Finish Weight (g) aluminium raw aluminium raw aluminium raw aluminium raw atalogue

18 luminium range - Hinges ommon hinges luminium profile hinges This hinge has the same footprint and design as our friction, detent and spring hinges. ll are fully interchangeable. Plastic pin with or without end caps. Part number Material Finish Note Weight (g) T5 alu clear anodised without cap T5 alu black anodised without cap T5 alu clear anodised with cap T5 alu black anodised with cap 130 Ø 6.3 Ø & & Heavy duty aluminium profile hinges Free swinging hinge. It has the same footprint and design as the spring hinge for heavy duty applications (part numbers: , , and ). ll are fully interchangeable. Part number Material Finish Weight (g) T5 alu clear anodised T5 alu black anodised Ø Ø atalogue 018

19 luminium range - Hinges ommon hinges luminium hinges - 50 mm width Hinge with 304 stainless steel riveted pin. Part number Material Finish Weight (g) T5 alu raw T5 alu raw luminium hinges with reversed leaves - 50 mm width Hinge with 304 stainless steel riveted pin. Part number Material Finish Weight (g) T5 alu raw T5 alu raw atalogue

20 luminium range - Hinges ommon hinges lean room hinge 65 x 60 mm No metal-to-metal contact. Polyacetal bushings minimize particles. oor size: max. W600 x L800. oor weigh: max. 13 kg/pair. 303 stainless steel pin. Part number Material Finish E S Weight (g) aluminium anodised S 40 E Ø14 lean room hinge 100 x 60 mm No metal-to-metal contact. Polyacetal bushings minimize particles. oor size: max. W600 x L800. oor weight: max. 13 kg/pair. 303 stainless steel pin. Part number Material Finish E S Weight (g) aluminium anodised E Ø14 S atalogue 018

21 luminium range - Hinges ommon hinges lean room lift-off hinges 65 x 60 mm No metal-to-metal contact. Polyacetal bushings minimize particles. oor size: max. W600 x L800. oor weight: max. 8 kg/pair. 303 stainless steel pin. Part number Material Finish G S Note Weight (g) aluminium anodised type aluminium anodised type S Ø G luminium lift-off hinges 80 x 80 mm Zinc plated steel pin. Nylon bushing. Part number Material Finish S Note Weight (g) aluminium anodised silver type aluminium anodised silver type ) Ø atalogue

22 luminium range - Hinges ommon hinges luminium lift-off hinges 100 x 85 mm Zinc plated steel pin. Nylon bushing. Part number Material Finish S Note Weight (g) aluminium anodised silver type aluminium anodised silver type ) Ø luminium lift-off hinges 100 x 100 mm Zinc plated steel pin. Nylon bushing. Part number Material Finish S Note Weight (g) aluminium anodised silver type aluminium anodised silver type ) 1 Ø atalogue 018

23 luminium range - Hinges Various hinges Lift-off hinges in aluminium profile with a stainless steel pin Stainless steel pin. Supplied with polymer caps. Part number Material Finish E Note Weight (g) T5 alu clear anodised type T5 alu clear anodised type T5 alu black anodised type T5 alu black anodised type 2 50 Ø 4 Ø 8.2@ E Ø & & atalogue

24 luminium range - Latching systems Spring loaded latches Springloaded bolt with locking system in aluminium Stop when open. ody: clear anodised aluminium. Shaft and handle: raw aluminium. ap: PE, black. Spring: stainless steel. Part number Material Finish Note Weight (g) T5 alu clear anodised type T5 alu clear anodised type 1 58 (13.9) () Ø 12.9 Ø Ø 6.2(x2) Ø 10.2(x2) arrel bolt in aluminium ody: clear anodised aluminium. Shaft and handle: raw aluminium. No strike. Part number Material Finish Weight (g) T5 alu clear anodised Ø () Ø Ø 10.2(x2) Ø 6.2(x2) atalogue 018

25 luminium range - Handles Grab handles Rear mounted grab handles 92 and 108 mm Part number Material Finish L M Weight (g) aluminium polished aluminium polished (L) () () M Rear mounted grab handles 52 to 120 mm Part number Material Finish L M Weight (g) aluminium clear anodised aluminium clear anodised aluminium clear anodised aluminium clear anodised aluminium polished (L) () () M atalogue

26 luminium range - Handles Grab handles lack aluminium rear mounted grab handles 75 to 150 mm Part number Material Finish Weight (g) aluminium black painting aluminium black painting aluminium black painting M5 7 8 lack aluminium rear mounted grab handles 88 to 120 mm Part number Material Finish F Weight (g) aluminium matt black aluminium matt black M 5 F 488 atalogue 018

27 luminium range - Handles Flush handles Flush handles 105 x 63.5 mm This handle has 2 detents at 0 and 90. Maximum load: 100 kg/pair. Handle is chrome plated. elivered unassembled. ssembled version: upon request. Part number Material Finish Weight (g) aluminium raw () Ø ø Flush handle 120 x 91 mm This handle has 2 detents at 0 and 90. Maximum load: 100 kg/pair. elivered unassembled. ssembled version: upon request. Part number Material Finish Weight (g) aluminium raw () R Ø ø atalogue

28 luminium range - ccessories Recessed hooks Soft closing recessed hook Hook is spring loaded to retract with a soft closing mechanism. an be mounted on wood or sheet metal. Installation on sheet metal: use bracket Installation on wooden panel: please take off the cushion rubber. Panel Thickness: Wood: Min. 20 mm. Sheet Metal: 0.8 to 4.0 mm. Load capacity: 300 N max. Material: aluminium, POM, pin in stainless steel. Part number Material Finish Weight (g) aluminium dark grey aluminium silver () (7) M6 (70 ) R3 54 (32.7) (40) 20 R3 R3 20~29 30 racket for soft closing recessed hook For sheet metal application. Panel thickness from 0.8 to 4.0 mm. Supplied with one M6x20 stainless steel screw. Part number Material Finish Weight (g) steel zinc chromate plated Ø atalogue 018

29 luminium range - ccessories Recessed hooks Spring loaded recessed hook Hook is spring loaded to retract. an be mounted on wood or sheet metal. Installation on sheet metal: use bracket Installation on wooden panel: please take off the cushion rubber. Panel Thickness: Wood: Min. 20 mm. Sheet Metal: 0.8 to 1.6 mm. Load capacity: 200 N max. Material: aluminium, pin in stainless steel. Part number Material Finish Weight (g) aluminium dark grey () Ø 4.2 M4 (70 ) (40.3) R4 R4 20~ racket for spring loaded recessed hook For sheet metal application. Panel thickness from 0.8 to 1.6 mm. Supplied with one M4x14 stainless steel screw. Part number Material Finish Weight (g) steel zinc chromate plated Ø atalogue

30 luminium Gamme lu range - ccessories - ccessories luminium mini slides Full extension. Positive stop. Thin profi le for various applications. LG = slide length. K = travel length. N = load rating (kg/pair). Telescopic slides Part number Material Finish K LG N Weight (g) aluminium anodised aluminium anodised aluminium anodised K (2) 11 5 Ø2.8 x LG 16 LG 12 Ø atalogue 018