Material: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated

Transcription

1 4-249 Hinge Pr Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt chrome plated, or zinc die, matt black. Nut plate: Version zinc die, matt chrome zinc die, matt black see page plated 180 hinge Countersunk screws are not included! Please order nut plate separately: Further types with D-SNAP fastening

2 4-250 Hinge Pr Screw-on Hinge with or without grounding/earthing device. RH or LH application. Opening Angle min. 180, with version b) 270 zinc die, black or chrome plated Pivot pin and molded in screws: to a1) Grounding/earthing washer: Spring: spring steel Version chrome plated black see page a) Hinge with screws M5 molded in a1) as a), but grounding/earthing version b) Hinge with countersunk holes for M Grounding/earthing washer for a1), 4 pieces Combination of versions a) and b) on request. Version b) in Countersunk machine screws zinc plated

3 4-260 Hinge Pr Screw-on Hinge with or without grounding/earthing device. RH or LH application. Opening Angle min. 180, with version b) 270 zinc die, black or chrome plated Pivot pin and molded in screws: to a1) Grounding/earthing washer: Spring: spring steel Version chrome plated black see page a) Hinge with screws M6 molded in a1) as a), but grounding / earthing version b) with countersunk holes for M Grounding/earthing washer for a1), 4 pieces Combinations of version a) and b) on request. Version b) in Countersunk machine screws zinc plated

4 4-264 Hinge Pr Screw-on hinge RH or LH application. Opening Angle 270 a) and b) zinc die, black or chrome plated Version zinc die, chrome zinc die, black see page plated a) Hinge with molded in countersunk screws b) with countersunk holes for M to b) countersunk machine screws 09.5 Version b) in

5 4-262 Hinge Pr Srew-on hinge RH or LH application. Allowing application around corner. Combination of versions a) and b) on request. zinc die, black or chrome plated Pivot pin and molded in screws: Version chrome plated black see page a) Hinge with screws M6 molded in b) Hinge with countersunk holes for M Countersunk machine screws zinc plated 09.5 Version b) in

6 4-270 Hinge Pr Screw-on Hinge with or without grounding/earthing device. RH or LH application. Opening Angle min. 180, with version b) 270 Combination of versions a) and b) on request. zinc die, black or chrome plated Pivot pin and molded in screws: to a1) Grounding/earthing washer: Spring: spring steel Version chrome plated black see page a) Hinge with screws M8 molded in a1) with screws M8 molded in, but grounding / earthing version b) with countersunk holes for M Grounding/earthing washer for a1), 4 pieces Version b) in Countersunk machine screws zinc plated

7 4-272 Hinge Pr Srew-on hinge RH or LH application. Opening Angle 270 Allowing application around corner. Combination of versions on request. zinc die, black or chrome plated Version chrome plated black see page a) Hinge with 4 countersunk holes for screws M b) for countersunk screws M6 with 6 countersunk holes Countersunk machine screws zinc plated

8 4-274 Hinge Pr Screw-on hinge RH or LH application. Opening angle 270. a) and b) zinc die, chrome plated or black coated Version zinc die, chrome zinc die, black see page plated a) with different hinge half lengths The short hinge half length is also available with countersunk holes , b) with identical hinge half lengths

9 4-275 Hinge Pr Screw-on hinge RH or LH application. Opening angle 270. *The back of the hinge at the marked locations has prepared holes which can easily be drilled to create additional installation holes. a) and b) zinc die, black or chrome plated Version zinc die, chrome zinc die, black plated a) with different hinge half lengths b) with identical hinge half lengths

10 4-247 Hinge Pr Screw-on for aluminium profiles, lift-off. These hinges allow the linking of different profile widths. Parallel and perpendicular mounting of profiles is possible. The DIRAK tenon blocks fit into the recess at the back of the hinges and combine positioning, fastening and anti-rotation features. For application with non DIRAK tenon blocks or on flat surfaces (e.g. sheet metal, glass), the corresponding fastening blocks are available with a safety device preventing rotation. zinc die, black or chrome plated Tenon blocks and fastening blocks: zinc die, untreated Version groove width in profile Tenon blocks Fastening / Positioning blocks* see page (max. door thickness 3.2mm) 8mm (max. door thickness 3.2mm) 10mm for application on flat surfaces c) Fixing screws M6x12 DIN * for application with non DIRAK tenon blocks 09.5 Version Part numbers for profile width PB Surface chrome plated, door version RH Surface chrome plated, door version LH Surface black, door version RH Surface black, door version LH Version RH hinge part, chrome plated hinge part, black coated PB Dimension C a) with pin / b) a) with pin / b) 30 16, , , Version LH hinge part, chrome plated hinge part, black coated PB Dimension C a1) with pin / b1) a1) with pin / b1) 30 16, , ,

11 4-247 Hinge Pr

12 4-248 Hinge Pr The Screw-on see page can also be installed on non-profile (e.g. sheet metal) door/frame constructions. On this page we show the possible cutouts. Alternatively the cutouts can be horizontal or vertical or a combination of both. Extended cutouts allow horizontal or vertical adjustability! see page und Part No. see page a) Hinge / hinge parts groove width in profile b) Tenon block (max. door thickness 3.2mm) 8mm c) Tenon block (max. door thickness 3.2mm) 10mm d) Fastening block 8mm e) Fastening block 10mm f) Fastening for application on flat surfaces Other dimensions Countersunk machine screws zinc plated, washer and nut

13 4-345 Hinge Pr01/ for nested or surface mounted door Elegant Screw-on Hinge for nested/flush constructions. Lift-off. The installation screws are concealed. Although designed initially for flush constructions, this hinge can also be used for surface mounted doors (refer to RH example of application). Attention: In this case the opening angle is only about 130. Due to the endless number of different applications with often extremely limited fitting space (e.g. LH example of application) we do not include any screws for this hinge. See page Hinge: zinc die, chrome plated or black coated Spacer Teflon, black or white Version chrome plated chrome plated black black RH LH RH LH Screw-on hinge

14 4-346 Hinge Pr Lift-off, nested door Elegant Screw-on Hinge for nested/ flush constructions. Opening angle 160. The fitting screws are concealed. see page The 35mm screw-distance allows for easier fitting. zinc die, chrome plated or black coated Bearing washer: Teflon, black or white Version chrome plated chrome plated black black RH LH RH LH Srew-on hinge screws M5x8 with under head serrations and a Teflon bearing washer are included

15 4-348 Hinge Pr01/ for nested or surface mounted door Screw-on Hinge, Mini. Door is lift-off. Pin molded into frame part. Frame part and Door part: zinc die, black Version Part No. LH RH (as drawn)

16 4-194 Hinge Pr Screw-on Hinge for flush door construction. Hinge parts: Washers: brass, nickel plated Stud, nuts and serrated washers: Pivot: steel, nickel plated Dimension L Dimension A Part No. see page a) b) M6 stud, 3 nuts and serrated washers are included. Stainless steel version c) i.e. Clip-on Profiles d) i.e. Clip-on Profiles

17 4-225 Hinge Pr Screw-on / Weld-on Hinge. a) and b) c) (not drawn) Hinge-middlepart: steel, untreated Hinge-endparts Washer: brass, nickel plated Pivot: steel, nickel plated Version Part No. a) Middle part long, with two holes Ø8.4 mm / b) Middle part short, with one hole Ø8.4 mm / c) Middle part short, without holes (Weld-on)

18 4-230 Hinge Pr Screw-on Hinge for flush door construction. Hinge parts: Washers: brass, nickel plated Stud, nuts and serrated washers: Pivot: steel, nickel plated Dimension L Dimension A Part No. see page a) M8 stud, 3 nuts and serrated washers are included. Stainless steel version b) i.e. Sealing Profiles

19 4-240 Hinge Pr Hinge for flush door construction. RH or LH application. Hinge: zinc die, black Pin and washer: Part No. Hinge

20 4-330 Hinge Pr Hinge with PA bushings. Opening angle max zinc die, black or chrome plated or Bushings: PA, natural Version standard frame part chrome plated standard frame part black raised frame part chrome plated raised frame part black Hinge with PA bushings Pin: Pin: Countersunk machine screws, zinc plated see page 09.5 a) i.e. Clip-on Profiles

21 4-340 Hinge Pr Hinge with PA bushings. Opening angle 180. zinc die, black or chrome plated or Bushings: PA, natural Version standard frame part chrome plated standard frame part black raised frame part chrome plated raised frame part black see page Hinge with PA bushings Pin: Pin: Countersunk machine screws zinc plated

22 4-355 Hinge Pr Screw-on Hinge for flush doors, with PA bushings. RH or LH application. Frame part: zinc die, zinc plated Door part: Bushings: PA, natural Part No. see page Hinge Countersunk machine screws, zinc plated

23 4-278 Hinge Pr Srew-on hinge Opening Angle 270 As an alternative please refer to the version on page A), A1) and B) or black coated C) and C1) Hinge complete: steel, chrome plated or dull brass plated Part No. A) Hinge, A1)Hinge, steel, black coated B) Hinge, as A, but with shortened shank C) Hinge, steel, chrome plated C1)Hinge, steel, dull brass plated

24 4-315 Hinge Pr01/ Weld-on Hinge for Heavy Duty applications, made from forged profile steel. Hinge: steel Height H Length L ØKnurl D ØPin d Thickness S Part No. 40 / / / / / / / / / / / / / / / / / / * 80 / / * 80 / / * * Pin Ø 8mm with lubricating nipple available on request. Other dimensions or special shapes on request

25 4-271 Hinge Pr01 270, adjustable 2D screw hinge for RH or LH application. Opening angle 270. The teeth on the adjusting bushings and in the oblong holes of the hingebodies prevent slipping of the hinge. In contrast with conventional oblong holes, the countersunk heads of the screws have full contact with the adjusting bushings. These bushings completely cover the oblong holes, preventing deposit of dust within the adjusting area. Matching arrow tips mark the 0-position. Hinge bodies and bushings: zinc die Version chrome plated black see page A B C Countersunk machine screws

26 4-350 Hinge Pr Adjustable 3D Hinge adjustable for nested/flush doors. Adjustable in : height ±2mm (0,079) width ±2mm (0,079) depth ±2mm (0,079) Hinge parts: zinc die, untreated (zinc coloured) or black coated Base-plate: Bushings: PA, natural brass, untreated or Washers: Slotted screw: or *Base plate: steel black coated Adjustment screws: Version surface not plated (zinc finish) surface black coated 3 D Hinge with pin brass, untreated RH version (as drawn) LH version (mirror view) Not assembled for RH and LH D Hinge with pin RH version (as drawn) LH version (mirror view) Not assembled for RH and LH

27 4-243 Hinge Pr detent Heavy Duty Detent Hinge with an opening angle of 180 and latching positions at -5, 85 and 175. The negative latching position can keep the door firmly shut even against a rubber seal. Beginning of compression at a position of approx. 5. zinc die, black coated Part No. Hinge

28 4-400 Hinge PA Pr x40, screw-on Elegantly designed screw-on hinge for countersunk screws according to DIN 7991, or DIN ISO and DIN 965 or DIN ISO LH and RH application. Opening angle 180. Captive pin. Pin protected against loosening and falling out. Tight tolerance in knuckles insures proper alignment. 6-part knuckle-pin assembly. Lightweight. Corrosion resistant and fl ame resistant. Rounded corners. Hinge: PA6, black Part No. Hinge PA DIRAK GmbH Königsfelder Str Ennepetal Tel. / Phone: +49 (0) 2333/837-0 Fax: +49 (0) 2333/ /

29 4-708 Torque Hinge Pr Hinge with unchanging torque throughout its full range of motion. Continuously adjustable torque 0 5Nm. The adjustment of the torque is made with a hexagon socket key size 4 in the hinge shaft. The doors may be moved into any position and remain at exactly that position. Also usable as coverstays for light duty application. Installation with hexagon screws or hexagon nuts M6. Without any stop. Adjustable torque Constant torque throughout its fully range of motion RH and LH application. Applications: shutters, doors protection devices, cover for industrial enclosures, HVAC, electrical industry, machine tools and instrumentation. Hinge and covers: PA, black Version Nm Part No. Torque Hinge

30 4-709 Torque Hinge Pr Hinge with unchanging torque throughout its full range of motion. Continuously adjustable torque 0 5Nm. The adjustment of the torque is made with a hexagon socket key size 4 in the hinge shaft. The doors may be moved into any position and remain at exactly that position. Also usable as coverstays for light duty application. Installation with hexagon screws or hexagon nuts M6. Without any stop. Adjustable torque Constant torque throughout its fully range of motion. RH and LH application. Applications: shutters, doors protection devices, cover for industrial enclosures, HVAC, electrical industry, machine tools and instrumentation. Hinge and covers: PA, black Version Nm Part No. Torque Hinge