Visual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page

Size: px
Start display at page:

Download "Visual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page"

Transcription

1 NEWS

2 Visual index Stainless Stainless 2012 NEW PRODUCTS Stainless NEWS Pin with weldable fastening button Stainless Panel fastening p.n1 button Stainless p.n2 Aluminium hinge external fastening reduced dimensions Stainless Screwable hinge with locking p.n4 with button Stainless PHARMA p.n6 Adjustable foot Stainless PHARMA Articulated foot p.n8 Ø75 Stainless PHARMA p.n9 Articulated foot Ø75 Articulated foot p.n10 Ø80 p.n11 Articulated foot Ø100 Articulated foot p.n12 Ø100 p.n13 To be continued on next page Using the product family indicated on the page, you may enter the product in the relative section of your Handbook. NEWS

3 Stainless 2012 NEW CODES FOR EXISTING PRODUCTS Visual index V-shaped snap doorstop Modular handles Articulated foot Ø124 Ø28-30 tube kit p.u2 for floor-mounting p.u3 540 mm long Modular handles Ø28-30 tube kit p.u4 840 mm long p.u6 Ø28 head coupling p.u12 Polyamide hinge low-cost p.u14 Angled handle kit Ø28-Ø30 tube Double-angle p.u8 Ø28-Ø30 tube kit V-shaped with snap release p.u10 for base p.u16 V-shaped with snap release p.u

4 Have you got all the BOOKS? 2/2 Manopole, tappi e portacavi 1/2 Remember that... you can download the handbooks in PDF format from or have them sent to your address

5 4238 Pharma handles Pin with weldable fastening button Use: Weldable on 20Ø tubes to fit handles on polycarbonate doors. Not suitable for glass doors. Material AISI 303 stainless. State of supply complete with fastening button and elastomer seal. Combinations a Stainless Pg.98 Th. G 1 1 H Ø 30 Ø d1 Wrench 27 weldable Ø D Button 10 L 4 Gasket Qty QUANTITY DISCOUNT Discounts - -5% -20% on request Order Ø D Ø d1 H Th. L G Weight Pack Finish code mm mm mm mm mm mm g piece pcs shot peening 52 53, pcs ,5 5 shot peening 54 53, pcs ,5 5 shot peening 55 53, pcs shot peening 51 53, pcs ,5 5 shot peening 53 53, pcs ,5 5 shot peening 54 53, pcs shot peening 84 53, pcs ,5 20 shot peening 86 53, pcs shot peening , pcs ,5 15 shot peening ,93 M8 Products not in stock minimum order: 4 pieces, delivery in 20 days. Fax bsistemi@bettsistemi.com N1

6 Pharma handles 4237 Panel fastening button Use: for tightening processes in general, on polycarbonate panels. Material AISI 303 stainless. Stainless Th. 4 1 Ø 30 Ø 30 d L F Wrench 27 Qty QUANTITY DISCOUNT Discounts - -10% -20% on request Order Th. F L Weight Pack d Finish code mm mm mm g piece pcs M ,5 8 shot peening 24 34, pcs M ,5 11 shot peening 25 34, pcs M ,5 shot peening 26 34, pcs M ,5 shot peening 27 34,31 Products not in stock minimum order: 4 pieces, delivery in 20 days. N Tel

7 The Italian Quality Components Want to be always up-to-date? Download our free handbooks from our website:

8 Aluminium hinges 4128 For external fastening reduced dimensions long-long base Use: for restricting hinge opening and closing, suitable for section bars, part. 8045, 8090, 8032, Material aluminium hinge, stainless pin. Characteristics: possibility of fitting the hinges in right, left and embedded version with only 2 fastening screws. State of supply complete with pin and anti-friction washer. Aluminium Reduced dimensions 120 max. opening 30 F = Fixed M = Mobile 0 M 120 max. closing F centring elements 120 end-stop Ø8,2 26 = 30 = 2 6 Seat for UNI5933 M8 countersunk head screws C Q.ty QUANTITY DISCOUNT Disc % -17% on request Order Centering Centering Finish Weight Pack Version code frame door hinge g piece pcs w/out nuts and bolts no no shot peening 65 12, pcs w/out nuts and bolts yes yes shot peening 65 ü 9, pcs w/out nuts and bolts yes no shot peening 65 11,54 Products tabellanot in stockminimum order: 24 pieces, delivery in 10 days. N Tel

9 C Code a without centring elements Use: for tubular frame and panel door. a Tube - Panel ±40 a 4128 For external fastening reduced dimensions long-long base Aluminium hinges min.20 1,5 3,8 Thickness 4 6 Use: for containment guides. C Code Maximum opening/ closing angle a Guideguide Use: for profile frame and door. C Code centring elements Profile - Profile Sp centring elements Use: for profile frame and panel door. Profile - Panel Fax bsistemi@bettsistemi.com N5

10 Stainless hinges 2532 P Screwable with locking with button Use: for self-supporting doors (without external framework, fastening directly on the glass/panel) made of 4-8 mm thick glass or Plexiglas panels with a thickness of 6-10 mm. Material AISI316 stainless hinge, AISI304 stainless threaded button, AISI303 stainless pin, AISI316 stainless screws, brass antifriction washers, black polyethylene bushings and PVC gaskets (if provided). State of supply hinge complete with 1 threaded button and 2 M6x16 socket head screws, 1 fixing screw (if provided, see table); only for the glass version: 1 bushing and 2 gaskets, 1 mm thick (see table). Stainless Side A Shot-peened Side B Polished 0 M F 85 max. closing Type X 180 Type Y 160 Type Z 169 max. opening F = Fixed M = Mobile Easily sanitizable on the inside Type X without screw ø8.5 SIDE A Type Y with hexagonal head screw M8x25 UNI 5739 Type Z with special hexagonal head screw M8x SIDE B Gaskets HOLE Ø (Without packing) (packing = 1mm) Th N Tel

11 2532 P Stainless hinges Screwable with locking with button ø9 ø9 56 Q.ty QUANTITY DISCOUNT Discounts - -10% -17% on request Order Type Pack Version Application Th Finish Finish Weight code mm Side A Side B g piece X 4 pcs screws panel 6-10 shot peening mirror polishing , X 4 pcs screws, bushings and gaskets glass 4-8 shot peening mirror polishing , Y 4 pcs screws panel 6-10 shot peening mirror polishing , Y 4 pcs screws, bushings and gaskets glass 4-8 shot peening mirror polishing , Z 4 pcs screws panel 6-10 shot peening mirror polishing , Z 4 pcs screws, bushings and gaskets glass tabella 4-8 shot peening mirror polishing ,68 Products not in stock minimum order 4 pieces, delivery in 15 days. Fax bsistemi@bettsistemi.com N7

12 Connectors WP RE Adjustable foot in stainless Use: adjustable foot suitable for application in the pharmaceutical and food industries. The rounded surface of the foot prevents dust and dirt from depositing, while the threaded height-adjustment pin is completely hidden preventing dirt accumulation and stagnation areas. Material AISI 304 stainless. Standard pack: 2 pieces. Stainless 15 D D1 Qty QUANTITY DISCOUNT Discounts - -3% -6% 10% contact us Order Static load D1 D Weight Finish code N Ø Ø g piece M16 electropolished 742 ü 67,50 N Tel

13 M75 Stainless feet Articulated foot Ø75 in stainless Material AISI 304 stainless base and rod, anti-slip material in RAL 9005 black thermoplastic elastomer. Characteristics: the slightly rounded shapes make it easy to clean; Anti-slip rubber characteristics in compliance with FDA regulations; application temperature: from -20 C to C; hardness: 75 Shore, electrically not conductive; high chemical resistance to commonly used detergents high resistance to greases and oils. Standard pack: 4 pieces. State of supply depending on the version, complete with nut and washer (see table). Stainless 5 5 Ød A H C Wrench 22 Ø75 anti-slip material Q.ty QUANTITY DISCOUNT Discounts - -5% -10% -15% on request Order code Static load N Ø d rod H mm A mm C mm Nut and washer Wrench mm Rod material Weight g piece M M no 10 stainless 270 ü 16, M yes 10 stainless 290 ü 17,68 M M no 10 stainless , M yes 10 stainless ,46 M M no 13 stainless , M yes 13 stainless ,03 M M no 13 stainless , M yes 13 stainless ,81 Products not in stock minimum order: 12 pieces, delivery in 7 days. Fax bsistemi@bettsistemi.com N9

14 Stainless feet M76 Articulated foot Ø75 in stainless Material base, rod and fastening plate in AISI 304 stainless, anti-slip device in black NBR rubber. Characteristics: Made to be fastened to the floor. The fastening plate is embedded to allow the anchored foot to absorb vibrations. The rounded shapes make it easy to clean. Anti-slip rubber characteristics in compliance with FDA regulations; application temperature: from -20 C to C; hardness: 75 Shore, electrically not conductive; high chemical resistance to commonly used detergents high resistance to greases and oils. Standard pack: 4 pieces. State of supply depending on the version, complete with nut and washer (see table). Stainless 5 5 Ød E with fastening plate A H C Wrench Ød1 22 fastening plate Ø75 anti-slip material F Q.ty QUANTITY DISCOUNT Discounts - -5% -10% -15% on request Order Static load Ø d Ø d1 H A F E C Nut and Wrench Rod Weight code N rod mm mm mm mm mm mm washer mm material g piece M M no 10 stainless , M yes 10 stainless ,72 M M no 10 stainless , M yes 10 stainless ,50 M M no 13 stainless , M yes 13 stainless ,08 M M no 13 stainless , M yes 13 stainless ,70 Products not in stock minimum order: 12 pieces, delivery in 7 days. N Tel

15 H80 Stainless feet Articulated foot Ø80 in stainless Pharma Material base and rod in AISI 304 stainless, anti-slip device in black NBR rubber. Characteristics: model with linear design with covered connection shim between the base and the pin. The slightly rounded shapes make it easy to clean. Standard pack: 4 pieces. State of supply depending on the version, complete with nut and washer (see table). Stainless Ød sanitizable H C A Wrench 32 Ø80 anti-slip material Q.ty QUANTITY DISCOUNT Discounts - -5% -10% -15% on request Order code Static load N Ø d rod H mm A mm C mm Nut and washer Wrench mm Rod material Weight g piece H M no 10 stainless 310 ü 17, M yes 10 stainless 330 ü 18,81 H M no 10 stainless 360 ü 18, M yes 10 stainless 380 ü 19,59 H M no 13 stainless , M yes 13 stainless ,17 H M no 13 stainless , M yes 13 stainless ,77 Products not in stock minimum order: 12 pieces, delivery in 7 days. Fax bsistemi@bettsistemi.com N11

16 Stainless feet H81 Articulated foot Ø100 in stainless Pharma Material base and rod in AISI 304 stainless, fastening plate and anti-slip device in black NBR rubber. Characteristics: embedded fastening plate to allow the anchored foot to absorb vibrations. The slightly rounded shapes make it easy to clean. Standard pack: 4 pieces. State of supply depending on the version, complete with nut and washer (see table). Stainless for fastening to the floor Ød E H C Wrench 33 A sanitizable Ød1 Ø80 F anti-slip material fastening plate Q.ty QUANTITY DISCOUNT Discounts - -5% -10% -15% on request Order Static load Ø d Ø d1 H A F E C Nut and Wrench Rod Weight code N rod mm mm mm mm mm mm washer mm material g piece H M no 10 stainless , M yes 10 stainless ,19 H M no 10 stainless , M yes 10 stainless ,81 H M no 13 stainless , M yes 13 stainless ,37 H M no 13 stainless , M yes 13 stainless ,15 Products not in stock minimum order: 12 pieces, delivery in 7 days. N Tel

17 H100 Stainless feet Articulated foot Ø100 in stainless Pharma Material base and rod in AISI 304 stainless, anti-slip device in black NBR rubber. Characteristics: model with linear design with covered connection shim between the base and the pin. The slightly rounded shapes make it easy to clean. Standard pack: 4 pieces. State of supply depending on the version, complete with nut and washer (see table). Stainless Ød sanitizable 36 C A H Wrench anti-slip material Ø100 Q.ty QUANTITY DISCOUNT Discounts - -5% -10% -15% on request Order code Static load N Ø d rod H mm A mm C mm Nut and washer Wrench mm Rod material Weight g piece H M no 13 stainless , M yes 13 stainless ,81 H M no 13 stainless 640 ü 26, M yes 13 stainless 680 ü 28,25 Products not in stock minimum order: 12 pieces, delivery in 7 days. Fax bsistemi@bettsistemi.com N13

18 Snap doorstop 2544 V-shaped stainless with snap release Use: suitable for highly aggressive environments. Material AISI 316 stainless, spring in stainless for springs. Characteristics: more resistant than the version in plastic (Part ). State of supply latch preassembled with spring, striker plate (see table) Stainless striker plate ø4, Code Using a Ø12 mm pin as an alternative to the striker plate (not supplied), the opening force is increased to 30N. ø5, ,5 16 Q.ty QUANTITY DISCOUNT Discounts - -10% -17% on request Order Opening Force Weight Pack Striker plate Finish code N g piece pcs 40 yes shot peening 86 ü 36, pcs - no shot peening 59,5 ü 30,28 U Tel

19 2943 Polyamide feet and foot kit with threaded caps Articulated foot Ø124 for floor-mounting Material threaded rod, nut and washer see tables; base in reinforced polyamide, anti-slip material in thermoplastic elastomer. Colour base: see table; black anti-slip material. Standard pack: 8 pieces. State of supply complete with nut, washer and removable anti-slip seal (if provided, see table). high capacity 2,5 Ød 2,5 A H C Key Ø11 2 at 180 Ø90 Ø124 anti-slip material 5 C Floor-mounting by means of diaphragm breaking Q.ty QUANTITY DISCOUNT Discounts - -10% -17% on request Order code Static rod N ø d rod A mm H mm C mm Key Anti-slip material Colour base Material rod Weight g piece M yes black RAL9005 galvanised 613 ü 17, M yes black RAL9005 galvanised 700 ü 18, M yes grey RAL7016 stainless , M no grey RAL7016 stainless , M yes black RAL9005 stainless 760 ü 21, M yes black RAL9005 stainless 750 ü 15,73 Products not in stock minimum order: 50 pieces, delivery in 10 days. Fax bsistemi@bettsistemi.com U3

20 Modular handles 2035 Ø28-30 tube kit 540 mm long Use: to open doors (recommended) and drive carriages. Material couplings in reinforced polyamide, polypropylene end caps, tube in anodised aluminium or AISI 304 stainless (see table), spring washer (only for D= Ø28) in stainless AISI 304, M8x20 DIN 7984 screws and M8 square nut (see table). State of supply 2 handle couplings; 2 end caps; 1 tube cut to size, 2 DIN 7984 M8x20 socket head screws and 2 M8 square nuts (if provided, see table). Combinations a Stainless or aluminium Pg.92 Pg D couplings Door without frame plexiglass panel Door without frame glass panel Safety Door with frame M8x20 Hexagon countersunk head screw Button whith gasket Part M8 Self-locking nut M8x20 Screw Part.8032 U Tel

21 2035 Ø28-30 tube kit 540 mm long Characteristics of handle with Ø28 tube Modular handles Characteristics of handle with Ø30 tube Spring washer Hexagonal seat key Ø20,5 12,5 6,5 Ø8,5 to be secured with safety retaining rivet 3 washer 12,5 7 8,5 Ø8,5 diaphragm safety retaining rivet Warning to be avoided for recommended for = = applications on trolleys*14,5 applications on trolleys *30 50% of the tube 100% of the tube inserted in the coupling inserted in the coupling = = *30 Q.ty QUANTITY DISCOUNT Discounts - -10% -17% on request Order D Pack code Ø Screws Coupling Cap Tube Screws Weight colour colour material finish g piece pc 28 yes black RAL9005 black RAL9005 anodised alu. 15 μm galvanised , pc 28 yes black RAL9005 yellow RAL1021 anodised alu. 15 μm galvanised , pc 28 yes grey RAL7016 yellow RAL1021 anodised alu. 15 μm galvanised , pc 28 no black RAL9005 black RAL9005 anodised alu. 15 μm , pc 28 no black RAL9005 yellow RAL1021 anodised alu. 15 μm , pc 28 no grey RAL7016 yellow RAL1021 anodised alu. 15 μm , pc 28 no black RAL9005 black RAL9005 shot peening st , pc 28 no black RAL9005 yellow RAL1021 shot peening st , pc 28 no grey RAL7016 yellow RAL1021 shot peening st , pc 30 yes black RAL9005 black RAL9005 anodised alu. 15 μm galvanised , pc 30 yes black RAL9005 yellow RAL1021 anodised alu. 15 μm galvanised , pc 30 yes grey RAL7016 yellow RAL1021 anodised alu. 15 μm galvanised , pc 30 no black RAL9005 black RAL9005 anodised alu. 15 μm , pc 30 no black RAL9005 yellow RAL1021 anodised alu. 15 μm , pc 30 no grey RAL7016 yellow RAL1021 anodised alu. 15 μm ,61 Products not in stock minimum order: 1 piece, delivery in 5 days. Fax bsistemi@bettsistemi.com U5

22 Modular handles 2637 Ø28-30 tube kit 840 mm long Use: to open doors (recommended) and drive carriages. Material couplings in reinforced polyamide, polypropylene end caps, tube in anodised aluminium or AISI 304 stainless (see table), spring washer (only for D= Ø28) in stainless AISI 304, M8x20 DIN 7984 screws and M8 square nut (see table). State of supply 2 handle couplings; 2 end caps; 1 tube cut to size, 2 DIN 7984 M8x20 socket head screws and 2 M8 square nuts (if provided, see table). Combinations a Stainless or aluminium Pg.92 Pg.93 3 couplings Safety Door with frame Door without frame glass panel D Button whith gasket Part Part.8045 U Tel

23 2637 Ø28-30 tube kit 840 mm long Characteristics of handle with Ø28 tube Modular handles Characteristics of handle with Ø30 tube Spring washer Hexagonal seat key Ø20,5 12,5 6,5 Ø8,5 to be secured with safety retaining rivet 3 washer 12,5 7 8,5 Ø8,5 diaphragm safety retaining rivet Warning to be avoided for recommended for = = applications on trolleys*14,5 applications on trolleys *30 50% of the tube 100% of the tube inserted in the coupling inserted in the coupling = = *30 Q.ty QUANTITY DISCOUNT Discounts - -10% -17% on request Order D Pack code Ø Screws Coupling Cap Screws Weight anodised alu.15 μm colour colour finishing g piece pc 28 yes black RAL9005 black RAL9005 anodised alu.15 μm galvanised , pc 28 yes black RAL9005 yellow RAL1021 anodised alu.15 μm galvanised , pc 28 yes grey RAL7016 yellow RAL1021 anodised alu.15 μm galvanised , pc 28 no black RAL9005 black RAL9005 anodised alu.15 μm , pc 28 no black RAL9005 yellow RAL1021 anodised alu.15 μm , pc 28 no grey RAL7016 yellow RAL1021 anodised alu.15 μm , pc 28 no black RAL9005 black RAL9005 shot peening st , pc 28 no black RAL9005 yellow RAL1021 shot peening st , pc 28 no grey RAL7016 yellow RAL1021 shot peening st , pc 30 yes black RAL9005 black RAL9005 anodised alu.15 μm galvanised , pc 30 yes black RAL9005 yellow RAL1021 anodised alu.15 μm galvanised , pc 30 yes grey RAL7016 yellow RAL1021 anodised alu.15 μm galvanised , pc 30 no black RAL9005 black RAL9005 anodised alu.15 μm , pc 30 no black RAL9005 yellow RAL1021 anodised alu.15 μm , pc 30 no grey RAL7016 yellow RAL1021 anodised alu.15 μm ,18 Products not in stockminimum order: 1 piece, delivery in 5 days. Fax bsistemi@bettsistemi.com U7

24 H1 H2 Modular handles 2638 Angled handle kit Ø28-Ø30 tube Material reinforced polyamide couplings, polypropylene end caps, anodised aluminium or AISI 304 stainless tube. State of supply 4 handle couplings; 2 end caps; 1 tube cut and bent to size; 4 M8x20 socket head screws. Combinations a Stainless or aluminium Pg.92 Pg.93 L1 L2 D=Ø28 Part.4194 D=Ø30 Part.1902 Part.2687 R62 D=Ø28 Part.4195 D=Ø30 Part.1931 tabella U Tel

25 2638 Modular handles Angled handle kit Ø28-Ø30 tube Colour map black RAL9005; grey RAL7016; yellow RAL1021 Material tube A = aluminiun anodised 15 μm Qty M = shot peened stainless QUANTITY DISCOUNT Discounts - -10% -17% on request Order D Pack code Ø Screws H1 H2 L1 L2 Coupling Cap Material Finish Weight mm mm mm mm colour colour Tube Screws g piece pc 28 yes , ,5 black black A galvanised - ü 103, pc 28 yes , ,5 black yellow A galvanised - ü 103, pc 28 yes , ,5 grey yellow A galvanised - ü 103, pz 28 no , ,5 black black A - - ü 102, pc 28 no , ,5 black yellow A - - ü 102, pc 28 no , ,5 grey yellow A - - ü 102, pc 28 yes , ,5 black black M stainless - 159, pc 28 yes , ,5 black yellow M stainless - 159, pc 28 yes , ,5 grey yellow M stainless - 159, pc 28 no , ,5 black black M , pc 28 no , ,5 black yellow M , pc 28 no , ,5 grey yellow M , pc 30 yes black black A galvanised - 120, pc 30 yes black yellow A galvanised - 120, pc 30 yes grey yellow A galvanised - 120, pc 30 no black black A , pz 30 no black yellow A , pz 30 no grey yellow A , pz 30 yes black black M stainless - 172, pz 30 yes black yellow M stainless - 172, pz 30 yes grey yellow M stainless - 172, pz 30 no black black M , pz 30 no black yellow M , pz 30 no grey yellow M ,24 Products not in stockminimum order: 1 piece, delivery in 20 days. Fax bsistemi@bettsistemi.com U9

26 H1 H2 Modular handles 2639 Double-angle Ø28-Ø30 tube kit Material reinforced polyamide couplings, polypropylene end caps, anodised aluminium or AISI 304 stainless tube. State of supply 7 handle couplings, 2 end caps, 2 tubes cut and bent to size. Combinations a Stainless or aluminium Pg.92 Pg.93 L1 L2 R62 D=Ø28 Part.4194 D=Ø30 Part.1902 Part.2687 D=Ø28 Part.4195 D=Ø30 Part.1931 tabella U Tel

27 2639 Modular handles Double-angle Ø28-Ø30 tube kit Colour map black RAL9005; grey RAL7016; yellow RAL1021 Material tube A = aluminiun anodised 15 μm Qty M = shot peened stainless QUANTITY DISCOUNT Discounts - -10% -17% on request Order D Pack code Ø Screws H1 H2 L1 L2 Colour Colour Material Finish Weight mm mm mm mm Coupling Cap Tube Screws g piece pc 28 yes ,5 black black A galvanised - ü 186, pc 28 yes ,5 black yellow A galvanised - ü 186, pc 28 yes ,5 grey yellow A galvanised - ü 186, pc 28 no ,5 black black A - - ü 185, pc 28 no ,5 black yellow A - - ü 185, pc 28 no ,5 grey yellow A - - ü 185, pc 28 yes ,5 black black M stainless - 295, pc 28 yes ,5 black yellow M stainless - 295, pc 28 yes ,5 grey yellow M stainless - 295, pc 28 no ,5 black black M , pc 28 no ,5 black yellow M , pc 28 no ,5 grey yellow M , pc 30 yes black black A galvanised - 244, pc 30 yes black yellow A galvanised - 244, pc 30 yes grey yellow A galvanised - 244, pc 30 no black black A , pc 30 no black yellow A , pc 30 no grey yellow A , pc 30 yes black black M stainless - 304, pc 30 yes black yellow M stainless - 304, pc 30 yes grey yellow M stainless - 304, pc 30 no black black M , pc 30 no black yellow M , pc 30 no grey yellow M ,57 Products not in stockminimum order: 1 piece, delivery in 20 days. Fax bsistemi@bettsistemi.com U11

28 Modular handles 4194 Ø28 head safety coupling Use: as head or intermediate coupling for modular handles applicable on sliding doors or trolleys. Material reinforced polyamide, tube end cap in polyethylene, spring washer for M8 screw in stainless AISI 304. State of supply 1 handle coupling, 1 tube end cap, 1 spring washer. Combinations a Ø28 Pg.98 Pg.99 Pg.100 Pg.102 Pg.103 Pg.92 Pg.101 Pg.86 Safety Safety to be secured with safety retaining rivet L>600mm (add intermediate coupling) 82,5 62,5 53 Ø28 L Max. 600mm (with 2 couplings) spring washer recommended for = = applications on trolleys *30 100% of the tube inserted in the coupling 12,5 12,5 S=10,5 S=6,5 Ø8,5 15 Ø8,5 15 Ø20,5 Ø20,5 3 washer washer 3 tabella U Tel

29 4194 Modular handles Ø28 head safety coupling 30 L L ,5 81,5 Ø28 39 Ø28 WARNING End cap Part. 2091, to be applied only with Part Nos and screws DIN 7984 / ISO 7380F. For this application, the highest tab of the cap must be removed. Application example RL1 RS Pg.88 Acoupling Ø30 RT RL2 RL = lateral resistance RT = traction resistance Qty RS = thrust resistance QUANTITY DISCOUNT Discounts - -10% -17% on request Order D Pack code Ø S Screws RT RS RL1 RL2 Coupling Cap Weight N N N N colour colour g piece pz 28 10,5 no black RAL9005 black RAL ü 7, pz 28 10,5 no black RAL9005 yellow RAL ü 7, pz 28 10,5 no grey RAL7016 yellow RAL ü 7, pz 28 6,5 no black RAL9005 black RAL ü 7, pz 28 6,5 no black RAL9005 yellow RAL ü 7, pz 28 6,5 no grey RAL7016 yellow RAL ü 7,94 Fax bsistemi@bettsistemi.com U13

30 Plastic hinges 1995 Polyamide hinge low-cost Use: for hinge fastening to a tube having a thickness of less than 2 mm. 180 opening. Material polyamide hinge, pin, nuts and bolts (see table). Characteristics: for commercial M5 countersunk head nuts and bolts. 180 max. opening Plastic 0 M M M F 47 max. closing 90 F = Fixed M = Mobile ø ø5,3 4 Low-cost distance between centres Q.ty QUANTITY DISCOUNT Disc % -17% on request Order Material Colour Weight Pack Version code pin, nuts and bolts hinge g piece pcs w /out nuts & bolts stailess AISI 303 black RAL ü 4, pcs w /out nuts & bolts stailess AISI 303 grey RAL , pcs w /out nuts & bolts galvanised black RAL ü 3, pcs w /out nuts & bolts galvanised grey RAL ,88 Products not in stockminimum order: 288 pieces, delivery in 15 days. U Tel

31 The Italian Quality Components Want to be always up-to-date? Download our free handbooks from our website:

32 54,5 Snap doorstops 1265 V-shaped with snap release Use: for door locking. Material latch in polyacetal. for base Cod for base 19, ,4 State of supply V-shaped latch without screw and without nuts and bolts. Cod Cod M ,5 Type A for tube in State of supply V-shaped latch complete with 1 M6 striker pin and 2 M4x16 socket head screws in stainless. M ,5 Type B for tube in aluminium State of supply V-shaped latch complete with 1 striker pin and 2 3.9x19 self-threading screws in stainless. U Tel

33 1265 Snap doorstops V-shaped with snap release for base attachment space Q.ty QUANTITY DISCOUNT Discounts - -10% -17% on request Order Nuts and Opening force Weight Pack Colour code bolts N g piece pcs no - black RAL ü 5, pcs no - grey RAL ü 2, pcs Type A 25 black RAL , pcs Type A 25 grey RAL , pcs Type A 40 black RAL ü 8, pcs Type A 40 grey RAL ü 8, pcs Type B 25 black RAL , pcs Type B 25 grey RAL , pcs Type B 40 black RAL ü 8, pcs Type B 40 tabella grey RAL ü 8,16 Products not in stock minimum order 12 pieces, delivery in 5 days. Fax bsistemi@bettsistemi.com U17

34 Snap doorstops 1281 V-shaped with snap release Use: to be used on stainless and aluminium tubes for applications on double swing doors when you need to fit 2 latches (one on the upper and one on the lower side) on each door. To obtain an opening force the same as for a single door (which mounts only one latch behind the handle). Material polyacetal latch; reinforced polyamide striker plate; AISI 304 stainless nuts and bolts. Cod Type A for tube in State of supply V-shaped latch complete with 1 striker plate with pin, 2 M4x16 socket head screws, 2 M4x10 socket head screws. Cod Type B for tube in aluminium State of supply 1 V-latch, 1 striker plate with pin, 2 3.9x13 self-threading screws, 2 3.9x19 self-threading screws. U Tel

35 1281 Snap doorstops V-shaped with snap release Cod , ,5 30,4 attachment space 4 0 min 16 max 26 31, State of supply without nuts and bolts. 25 Q.ty QUANTITY DISCOUNT Discounts - -10% -17% on request Order Nuts and Opening force Weight Pack Colour Code bolts N g piece pcs no 25 black RAL , pcs no 25 grey RAL , pcs no 40 black RAL ü 5, pcs no 40 grey RAL ü 5, pcs Type A 25 black RAL ü 7, pcs Type A 25 grey RAL , pcs Type A 40 black RAL ü 7, pcs Type A 40 grey RAL ü 7, pcs Type B 25 black RAL , pcs Type B 25 grey RAL ü 7, pcs Type B 40 black RAL ü 7, pcs Type B 40 tabella grey RAL ü 7,02 Products not in stock minimum order 12 pieces, delivery in 5 days. Fax bsistemi@bettsistemi.com U19

36 Visual index New items produced in 2011 S NEW New products Articulated foot Ø100 in stainless Ø28 head safety coupling Ø28 head safety coupling Handle in stainless with oval cross-section Handle in tube Ø20 To be continued on next page These products are not available in the printed version of the Handbook. However, you can find them in the Handbook web edition at:

37 2011 New codes for existing products Visual index Stainless tube Weldable hinge with plate locking Angled handle kit Ø28-30 tube Double-angle Ø28-30 tube kit Ø28-30 tube kit, L = 540 mm Ø28-30 tube kit, L = 840 mm Hot-rolled tube bent to L-shape Hinge for outside- inside fastening Threaded cap for tube in inches End cap for tubes in inches

Stirrup-shaped handles, machine handles, apparatus handles

Stirrup-shaped handles, machine handles, apparatus handles Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles

More information

Function: Used to connect profiles at adjustable angles. Features: 1. Adjustable angles. Item Description For Screw Weight (g) Colour Finish Material

Function: Used to connect profiles at adjustable angles. Features: 1. Adjustable angles. Item Description For Screw Weight (g) Colour Finish Material 4.56 Swivel Fastener (SWF): Function: Used to connect profiles at adjustable angles. 1. Adjustable angles. SWF 1.25.0132.0 8 M6x S3.60 M6 S3.61 M6x S3.60 Item Description For Screw Weight (g) Colour Finish

More information

ALUMINIUM PROFILE SYSTEM SERIES 40

ALUMINIUM PROFILE SYSTEM SERIES 40 ALUMINIUM PROFILE SYSTEM SERIES With the basic grid mm (slot 5); mm (slot 6), 16mm, mm and 0mm (slot ). In addition to this, the complete connection technology and a large range of accessories. TABLE OF

More information

STANDARD COMPONENTS STANDARD

STANDARD COMPONENTS STANDARD US STANDARD COMPONENTS Housing in reinforced polyamide (Housing in reinforced polypropylene available on request). Adjustable chrome steel or stainless steel ball bearing, pre-lubricated. Can be re-lubricated

More information

TABLE OF CONTENTS SERIES 40

TABLE OF CONTENTS SERIES 40 TABLE OF CONTENTS SERIES ALUMINIUM PROFILES SERIES PAGE Technical data and profile cross-sections 2.4-2.17 Processing of profiles for connectors 2.1-2.19 Prices of aluminium profile processing 2. Aluminium

More information

Profile series I-40. System kit Profile series I-40

Profile series I-40. System kit Profile series I-40 Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000

More information

ACCESSORIES ACCESSORIES 2150 DRAWING POCKET (A4) 2152 DRAWING POCKET (A5) 2220 CIRCULAR INSPECTION WINDOW 2215 COUNTER SCREEN

ACCESSORIES ACCESSORIES 2150 DRAWING POCKET (A4) 2152 DRAWING POCKET (A5) 2220 CIRCULAR INSPECTION WINDOW 2215 COUNTER SCREEN ACCESSORIES GROUP NAME 2150 DRAWING POCKET (A4) 2152 DRAWING POCKET (A5) 2220 CIRCULAR INSPECTION WINDOW 2216 COUNTER SCREEN 2215 COUNTER SCREEN 24XX 240X EYEBOLT CAGE NUT 340.00.135 TOGGLE LATCH 340.00.133

More information

Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.

Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body. Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2

More information

From a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling

From a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers

More information

CAPE TOWN DURBAN EASTERN CAPE

CAPE TOWN DURBAN EASTERN CAPE JOHAESBURG 2-3 rd Street, Wynberg Sandton, 2196 Tel: 011 885 2523 Fax: 011 885 2541 E-mail: sales@nusaf.co.za CAPE TOW DURBA EASTER CAPE Unit 3 Saxenburg Road Jason Pillay Wayne Higgs Blackheath, 7580

More information

C13.10 CHRONO LOCKCASE AND PERIMETER LOCKING SET C13 SIDE HUNG WINDOWS

C13.10 CHRONO LOCKCASE AND PERIMETER LOCKING SET C13 SIDE HUNG WINDOWS C13 SIDE HUNG WINDOWS CHRONO LOCKCASE AND PERIMETER LOCKING SET 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS

More information

PULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S

PULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S 473 THERMOPLASTIC CAST IRON P U L L H A N D L E S ALUMINUM PULL HANDLES Manual Clamps 9 TriMax Vises 81 Pneumatic Workholding 121 Supports, Stops & Set Up Accessories 137 Precision Tooling Plates, Blocks

More information

KEEP YOUR FURNITURE AND EQUIPMENT PROTECTED

KEEP YOUR FURNITURE AND EQUIPMENT PROTECTED KEEP YOUR FURNITURE AND EQUIPMENT PROTECTED Our transit protection range is perfect for securing items from damage during transit. Check out our economical and easy ways to keep your furniture safe. We

More information

MR 25 to 200 : Worm wheel and screw kinematics. MR 400 to 1600 : Yoke kinematics. Output torques up to Nm. External coating.

MR 25 to 200 : Worm wheel and screw kinematics. MR 400 to 1600 : Yoke kinematics. Output torques up to Nm. External coating. Type series booklet 8505.12/12--10 MR manual actuators MR 25 to 200 : Worm wheel and screw kinematics MR 400 to 1600 : Yoke kinematics MR 400 to 1600 MR 25 to 200 Output torques up to 16 000 Nm Applications

More information

Level indicators, screw plugs

Level indicators, screw plugs Level indicators, screw plugs 885 Product overview Level indicators, screw plugs Oil level gauges K0443 Plastic plugs K0452 Oil level gauges K0444 Page 888 Aluminium plugs K0453 Page 894 Oil level sight

More information

Single foot switches - PX and PA series

Single foot switches - PX and PA series Single foot switches - PX and PA series Description The PX and PA foot switches are traditional products of Pizzato Elettrica that have recorded a continuous growth and success in the market. Modified

More information

B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS

B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS B12 TILT-TURN WINDOWS B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS

More information

Material: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated

Material: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated 4-249 Hinge Pr01 180 Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt

More information

ABOUT KJN ALUMINIUM PROFILES

ABOUT KJN ALUMINIUM PROFILES P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all

More information

Modular shelving STANDARD STAINLESS STEEL SERIES 2012 CATALOGUE. SHELVING line

Modular shelving STANDARD STAINLESS STEEL SERIES 2012 CATALOGUE. SHELVING line STANDARD STAINLESS STEEL SERIES 2012 CATALOGUE SHELVING line 001 Balboni Inox Leading manufacturer of stainless steel shelving Established in the late 50s, BALBONI has always operated in the mechanical

More information

Section 5 Doors and Door Components

Section 5 Doors and Door Components 0 Section Whether you re looking for plain doors, locking doors, sliding doors, or large walk-through doors, you ll find what you need on the following pages. Bosch offers two basic types of doors that

More information

Double action door rails

Double action door rails The solution for heavy doors. Convincing in quality and design. CONTENTS Technical details 26-29 Materials and surface finishes 290 Product information 105 mm door rails: 55/65 mm pivot point 291-292 22/24

More information

Indexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel

Indexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing

More information

Clean Line Stainless steel

Clean Line Stainless steel www.puzzleadvance.com Clean Line Stainless steel operating parts lock systems hinges profile rubber linear systems anti-fadigue mats clamping technology standard elements operating magnets Clean Line With

More information

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear

More information

Accessories Cable glands

Accessories Cable glands Accessories Cable glands 235 Technical data Cable glands Brass hexagon cable gland Brass sealing cable gland Material: Brass, nickel-plated Gasket: Soft rubber Protection type IP 54 Additional information:

More information

Technical data. Material e-reinforced polyester in grey or black. Seal Neoprene (CR) round cord (siliconized)

Technical data. Material e-reinforced polyester in grey or black. Seal Neoprene (CR) round cord (siliconized) BERNSTEIN Series CP and CPS polyester enclosures are produced from highgrade e-reinforced polyester. Thanks to their reduced surface resistance (Ro < 109 Ohm), the black polyester enclosures meet the requirements

More information

Window Fittings Sliding/Folding Fittings

Window Fittings Sliding/Folding Fittings Folding window fitting Fold 35 Features For timber door frames For 2- to 6-leaf folding doors Floating suites possible Full corrosion resistant construction, ideal for coastal applications Concealed channel

More information

TRACTOR AND EARTH MOVING MACHINES

TRACTOR AND EARTH MOVING MACHINES CATALOGUE 2016 TRACTOR AND EARTH MOVING MACHINES CABINS COMPONENTS DESIGN AND CONSTRUCTION ON DEMAND CHANGES AND ADAPTATION 2 METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490

More information

Blind and Polycarbonate Cases FQ Series: stainless steel cases with single door

Blind and Polycarbonate Cases FQ Series: stainless steel cases with single door Series Smart 22 Series Smart Blind and Polycarbonate Cases FQ Series: stainless steel cases with single door The Smart series is the proposal for boxes with and witout inner door for small and medium sized

More information

Modular multiple foot switches PC series

Modular multiple foot switches PC series 3B Modular multiple foot switches PC series Combination diagrams EMERGENCY PUSH BUTTON COMMERCIAL BOX ALUMINIUM PIPES CARRYING ROD ALUMINIUM PIPES HANDLE KIT STABILIZING PLATE DOUBLE CARRYING ROD COMMERCIAL

More information

Direct drive electronic position indicators

Direct drive electronic position indicators Direct drive electronic position indicators DD51-E ELESA original design Direct drive electronic position indicators with battery power supply Base and case High-resistance polyamide based (PA) technopolymer.

More information

Inserts for square and rectangular tubes

Inserts for square and rectangular tubes Inserts for square and rectangular tubes 35 Outer tube dimensions Ribbed inserts/plugs with smooth sliding surface for square and rectangular tubes. The tube inserts are suitable for tubes with a wall

More information

TRACTOR AND EARTH MOVING MACHINES CABINS COMPONENTS

TRACTOR AND EARTH MOVING MACHINES CABINS COMPONENTS CATALOGUE 2018 TRACTOR AND EARTH MOVING MACHINES CABINS COMPONENTS DESIGN AND CONSTRUCTION ON DEMAND CHANGES AND ADAPTATION 2 METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490

More information

Pull handles, tubular handles, recessed handles

Pull handles, tubular handles, recessed handles , tubular handles, recessed handles 303 K0187 170 R25 55 14 M8 35 R12 140 32 82 R8 14 M8 57 uroplast PF 31, black. ushing brass or galvanized steel. igh-gloss polished. K0187.101 25 ssembly: From the rear.

More information

Protection And Separating Wall Systems

Protection And Separating Wall Systems 1 The protection and separating wall sys tem comprises of a number of different profile families. Standard Profiles ( mm thru 8 mm) From the extensive range of Silverline profiles, most static requirements

More information

Panic exit devices with integrated latch: Push bars and touch bars complying with EN 1125

Panic exit devices with integrated latch: Push bars and touch bars complying with EN 1125 DOOR technology order catalogue Panic exit devices with integrated latch: Push bars and touch bars complying with EN 1125 Panic exit devices with integrated latch in compliance with EN 1125 Table of contents

More information

Desk-top cases J. Overview Cabinets Wall mounted cases Accessories for cabinets and wall mounted cases 3.

Desk-top cases J. Overview Cabinets Wall mounted cases Accessories for cabinets and wall mounted cases 3. Overview..... 0 Cabinets...... 1 Main Catalogue Desk-top cases Wall mounted cases........ 2 Accessories for cabinets and wall mounted cases 3 Climate control 4 Desk-top cases 5 02202003 Subracks/ 19" chassis...

More information

Part-No. Article / Version Supply A Tilt foot bar of ABS, off-white RAL 9002 A

Part-No. Article / Version Supply A Tilt foot bar of ABS, off-white RAL 9002 A *Mounting angle ( ) on the adapter serves as a support to locate the case in the right position. After attachment of the adapter, the mounting angles can be easily removed. Tilt foot bar, Case feet TILT

More information

Components: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)

Components: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body.   ød2. Pipe / Tube / Hose Bore (1 Clamp Body) ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.

More information

K K

K K K0186 cast iron 2 R Gray cast iron, GJS 400 umbled, black powder-coated, support faces machined K0186.12510 1 ±0,5 KIPP, metric 202 Item o. Item o. 1 2 R Load tumbled tumbled capacity powder-coated, black

More information

MECHANICS. Aluminium profiles Linear guides Drive elements Linear units Rotational units

MECHANICS. Aluminium profiles Linear guides Drive elements Linear units Rotational units Aluminium profiles...2-2 Linear guides...2-18 Drive elements...2-44 Linear units...2-52 Rotational units...2-94 Aluminium profiles Aluminium profiles PP profiles Panel profiles PP PP 100 PP 1 PP 200 Overview

More information

Installation and Maintenance Manual MRW-02. Radial Winch 20 ST

Installation and Maintenance Manual MRW-02. Radial Winch 20 ST MRW-02 Index Introduction 3 Technical characteristics 3 Weights 3 Maximum working load 3 Outline 3 Installation 4 Procedure 1 5 Procedure 2 6 Installation procedure 8 Positioning the self-tailing arm 9

More information

FLUX walking aid Spare Parts Catalog

FLUX walking aid Spare Parts Catalog FLUX walking aid Spare Parts Catalog GB/US When ordering spare parts, please always indicate the following basic data to ensure smooth delivery: ) Serial no. of the product ) Frame width ) Frame colour

More information

ISO CYLINDERS Ø ACTUATORS

ISO CYLINDERS Ø ACTUATORS ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration

More information

T EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve

T EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼

More information

Accessories product range

Accessories product range Accessories 199 Accessories product range Type SB/SBF (spiral tape) Spiral tapes are used to bundle cable harnesses efficiently and simply. The spiral tapes also protect the insulation of the wires. Page

More information

English 1/2015. The Profi le System

English 1/2015. The Profi le System English 1/2015 The Profi le System MayTec System Technology The key to success! Solutions with Innovative Profi le The Profi le System Curved Profi les The Clean-Room System The Telescopic System The Linear

More information

The range of products is completed by a number of accessories, including:

The range of products is completed by a number of accessories, including: ACCESSORIES The range of products is completed by a number of accessories, including: Foot brackets, which serve to support the motor-and-pump unit in the event that the selected electric motor does not

More information

Applications Profitronic 19 / Profitronic 19U

Applications Profitronic 19 / Profitronic 19U Applications Profitronic 19 / Profitronic 19U 54 Enclosure in variable length version using profile technology Standard construction or version with connection compartment Optional Polycarbonate transparent

More information

INDEX - ALUMINIUM RANGE HINGES. profile 0.35 N.m. FinAlu continuous hinge 466. profile 0.70 N.m. Aluminium profile continuous hinge - 50 mm

INDEX - ALUMINIUM RANGE HINGES. profile 0.35 N.m. FinAlu continuous hinge 466. profile 0.70 N.m. Aluminium profile continuous hinge - 50 mm LUMINIUM RNGE INEX - LUMINIUM RNGE HINGES Finlu continuous hinge 466 luminium profile continuous hinge - 50 mm Rolled knuckle continuous hinge - 20 mm width Rolled knuckle continuous hinge - 25 mm width

More information

Cut out PRODUCT CODE HANDLE BODY FINISH MATERIAL MODUL. 5 mm Double bit 8 mm Square 9 mm Triangular Button. Stainless steel dust cap (Keyed alike) 03

Cut out PRODUCT CODE HANDLE BODY FINISH MATERIAL MODUL. 5 mm Double bit 8 mm Square 9 mm Triangular Button. Stainless steel dust cap (Keyed alike) 03 ROD-LATCH SYSTEM LINEAR HANDLE LOCK 204 V : 1 With mechanism Cut out Ergonomic and modern design Locking and unlocking by linear movement Suitable for inside & outside gasketing applications Swing handle

More information

GTK 80. Technical data

GTK 80. Technical data Industrial square suspension system with open cable duct for heavy loads Modular construction with free accessible cable duct Floor, top-mounting or wall exit options Technical data Material: connecting

More information

SYSTEM 25 SYSTEM 50 SYSTEM 63 SYSTEM 75 SYSTEM 100 AL. Alsident System100. Aluminium (AL) Product Information

SYSTEM 25 SYSTEM 50 SYSTEM 63 SYSTEM 75 SYSTEM 100 AL. Alsident System100. Aluminium (AL) Product Information Alsident System100 Aluminium (AL) Product Information System 100 Aluminium (AL) General Information Product Specification Product Description System 100 Aluminium Alsident System airflow between 140-400

More information

INTEGRATED HYDRAULIC BRAKE ACTUATORS

INTEGRATED HYDRAULIC BRAKE ACTUATORS INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit

More information

INTEGRATED HYDRAULIC BRAKE

INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The

More information

Specialist steel fixtures & fittings 316 (A4) & 304 (A2) Stainless Steel

Specialist steel fixtures & fittings 316 (A4) & 304 (A2) Stainless Steel Specialist steel fixtures & fittings 316 (A4) & 304 (A2) Stainless Steel DARAC LTD are a leading industrial supplier of architectural & rigging items under the brand name STEELGEAR. We stock a vast range

More information

BAYT 980. Oil-hydraulic Road Traffic Barrier. BAYT 980 painted version BAYT 980 stainless steel version inox

BAYT 980. Oil-hydraulic Road Traffic Barrier. BAYT 980 painted version BAYT 980 stainless steel version inox BAYT 980 Oil-hydraulic Road Traffic Barrier BAYT 980 painted version BAYT 980 stainless steel version inox GB Oil-hydraulic road traffic barrier BAYT 980 The Bayt 980 operator is a road barrier used to

More information

A12.11 SALTO 4008 A12 TURN-TILT WINDOWS

A12.11 SALTO 4008 A12 TURN-TILT WINDOWS A12 TURN-TILT WINDOWS A12.11 01.05.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...

More information

VACUUM CUP SUPPORTS. 3D drawings available at

VACUUM CUP SUPPORTS. 3D drawings available at In the following pages are listed the cups for which each support is suited. They are specially shaped to perfectly adhere to the internal profile of the cups and they are provided with a male or female

More information

MAMMOUTH Type Series Booklet

MAMMOUTH Type Series Booklet Butterfly Valve MAMMOUTH DN 1050-4000 PS 25 bar Type Series Booklet Legal information/copyright Type Series Booklet MAMMOUTH All rights reserved. The contents provided herein must neither be distributed,

More information

Accessories. The extensive accompaniment for glass doors.

Accessories. The extensive accompaniment for glass doors. The extensive accompaniment for glass doors. CONTENTS Materials and surface finishes 138 Product information Door rails 139-140 Door holders 141 Hinges - special applications 142 Door stop and strike plates

More information

Distribution boxes with suspension hook

Distribution boxes with suspension hook Distribution boxes with suspension hook Distribution boxes with suspension hook Pegasus Page 258 Dimensions: HxWxD = 220x140x140mm Imst Page 260 Dimensions: HxWxD = 197x197x120mm Freistadt Page 262 Kombi

More information

Serious about Service

Serious about Service Serious about Service Stainless steel enclosures IP66 Features and benefits Features: IP66 certified Grades 304, 304L and 316L available Monobloc symmetrical enclosure Scotch Brite mechanical polished

More information

Uniwat. Resilient Seated Gate Valves

Uniwat. Resilient Seated Gate Valves Uniwat Resilient Seated Gate Valves www.comeval.es Resilent Seated Gate Valves - UNIWAT 504/507 Copyright COMEVAL VALVE SYSTEMS - Data subject to revision - Regularly updated data on www.comeval.es - DS01

More information

Conveyor System ML2 ML2-1 MS2 MM3 ML2 MX2 DS2 DM3 DL2 DX2

Conveyor System ML2 ML2-1 MS2 MM3 ML2 MX2 DS2 DM3 DL2 DX2 Conveyor System Description 140mm width thermoplastic chain with aluminium frame conveyor system. Also available with stainless steel frame, please refer section. Examples of application industries Personal

More information

At Dyno we make the world of business go round. Up and down. And side to side.

At Dyno we make the world of business go round. Up and down. And side to side. Roller Catalogue 2017 SECTION At Dyno we make the world of business go round. Up and down. And side to side. Our conveyors make moving meat, veges, fruit, packages, gravel, and even luge sleds simple and

More information

RODLESS CYLINDER SERIES PU ACTUATORS

RODLESS CYLINDER SERIES PU ACTUATORS RODLESS CYLINDER SERIES PU 1 RODLESS CYLINDER SERIES PU RODLESS CYLINDER SERIES PU Series PU rodless cylinders have an internal strip for longitudinal tightness made of polyurethane (PU) with a harmonic

More information

C12.11 SALTO 4208 C12 SIDE HUNG WINDOWS

C12.11 SALTO 4208 C12 SIDE HUNG WINDOWS C12 SIDE HUNG WINDOWS C12.11 01.07.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...

More information

01 Product overview KT series order picking trolleys MultiPick trolley Pick and Pack Order picking container

01 Product overview KT series order picking trolleys MultiPick trolley Pick and Pack Order picking container 01 Product overview 01.01 01.09 KT series order picking trolleys 01 KT1 02 KT2 03 KT3 04 KT4 05 KT DRIVE 06 KT3-KOMBI 07 KT ALU 08 KT-R 09 KT-B 01.10 MultiPick trolley 01.11 Pick and Pack 10 MULTIPICK

More information

ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing

ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO

More information

ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing

ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO

More information

Installation and Maintenance Manual MRW-01. Radial Winch 20 ST

Installation and Maintenance Manual MRW-01. Radial Winch 20 ST MRW-01 Index Introduction Technical characteristics Weight Maximum working load Outline Installation Procedure 1 Procedure 2 Installation procedure Positioning the self-tailing arm Maintenance Washing

More information

ToppTube PA11 (Polyamide) page 4. ToppTube PA12 (Polyamide) page 5. ToppTube PA12HIPHL (Polyamide) page 6. ToppTube PUR 98A (Polyurethane) page 7

ToppTube PA11 (Polyamide) page 4. ToppTube PA12 (Polyamide) page 5. ToppTube PA12HIPHL (Polyamide) page 6. ToppTube PUR 98A (Polyurethane) page 7 ToppTube PA11 (Polyamide) page 4 ToppTube PA12 (Polyamide) page 5 ToppTube PA12HIPHL (Polyamide) page 6 ToppTube PUR 98A (Polyurethane) page 7 ToppTube PE-LD (Polyethylene) page 8 ToppTube PE-LLD (Polyethylene)

More information

Cam roller guide LF6S complete axis

Cam roller guide LF6S complete axis Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto

More information

TECHNICAL APPLICATIONS. Metalpak Sb200

TECHNICAL APPLICATIONS. Metalpak Sb200 TECHNICAL APPLICATIONS Metalpak Sb200 Metalpak is a sun blind with slats which can be packed and adjusted, at the very cutting edge in terms of sturdiness and design. Used outside a building, it stands

More information

Polyester-Enclosures MBP

Polyester-Enclosures MBP 24 MULTI-BOX Enclosure solutions Polyester-Enclosures MBP Protection class IP 66 MBP-Enclosures correspond with the high requirements of the mechanical engineering, shipbuilding, galvanic and petrochemical

More information

CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:

CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX: Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available

More information

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and

More information

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,

More information

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60 Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552

More information

Butterfly valves. Introduction. Made of ductile cast iron

Butterfly valves. Introduction. Made of ductile cast iron Made of ductile cast iron Introduction The portfolio of valves supplied by Keulahütte GmbH in Krauschwitz is rounded off by butterfly valves and check valves, which have been designed according to international

More information

Junction boxes for control, monitoring and control panel Ex tb

Junction boxes for control, monitoring and control panel Ex tb Junction boxes for control, monitoring and control panel - Zone 21, 22 - Category 2D - Aluminium, reinforced polyester or stainless steel enclosures - Standard or custom products Inspection window Padlockable

More information

Series 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve

Series 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN

More information

Mechanical load securing

Mechanical load securing With our WISTRA products in the area of mechanical load protection aids we offer quick and safe options of form-fit load securing for the most diverse means of transport. Many items in this product range

More information

Components: Dimensions / Order Codes

Components: Dimensions / Order Codes Light Series LB Components: Dimensions / Order Codes Clamp Body Single Design ø D 2 B ø D 3 H S ø D 1 L2 L3 Order Codes Clamp Body Standard Materials Polypropylene Colour: Black Material code: PP Polyamide

More information

Accessories (additional charge):

Accessories (additional charge): Alurail With Alurail, BOPLA has developed a modular DIN rail enclosure which is especially suitable for use in measurement, control and automatic control technology. Basic profiles, each in eight standard

More information

Product Data For FARNELL

Product Data For FARNELL ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:

More information

Modular valve block MVB 100/200

Modular valve block MVB 100/200 Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution

More information

Order No light grey. Order No black

Order No light grey. Order No black DPP- Plastic dome plug Body: Polyamide (V2 acc. to UL94) Sealing: Neopren Dynamic: -20 ~+80, short term:100 _ Easy and quick assembly Color: RAL7001 silver grey RAL7035 light grey RAL9005 black Blue, Red

More information

ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS

ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.

More information

BZ40. Dal 1901 COD

BZ40. Dal 1901 COD COD. 9901.09 REV.00 POS CODE TABLE 1 Mod. PM DESCRIPTION 1 0709LW CUPS-HEATER GRID 7817801 SCREW TPS M X 1 18 WASHER FOR SPRING D H OT NICKEL-PLATED 01 ASSEMBLY CUPS-HEATER 91 ASSEMBLY BODY STAINLESS STEEL

More information

FrENcH casement windows D11.15 HINGES

FrENcH casement windows D11.15 HINGES D11 French casement windows HINGES 01.02.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Hinges Contents 1. General....03

More information

DICTATOR RTS Tube Door Closer

DICTATOR RTS Tube Door Closer DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is virtually invisible because being built into the door. The joint can only be seen when the door is open. The

More information

BUTTERFLY VALVE 17 SERIES Gearbox

BUTTERFLY VALVE 17 SERIES Gearbox DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2

More information

Standard Parts for Mould Making

Standard Parts for Mould Making Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves

More information

Precision levelling wedges Due to their large contact area Bilz precision levelling wedges (PK) for vibration and structure-borne noise insulation

Precision levelling wedges Due to their large contact area Bilz precision levelling wedges (PK) for vibration and structure-borne noise insulation 28 Precision levelling wedges Due to their large contact area Bilz precision levelling wedges () for vibration and structure-borne noise insulation offer optimum support and stiffening of the machine bed.

More information

Operating Instructions ROCO Butterfly Valve with SKG Slider-crank Mechanism, with Electric Multi-turn Actuator

Operating Instructions ROCO Butterfly Valve with SKG Slider-crank Mechanism, with Electric Multi-turn Actuator Operating Instructions ROCO Butterfly Valve with SKG Slider-crank Mechanism, with Electric Multi-turn Actuator 1 Product and Performance Description 2 Design Features of ROCO Butterfly Valve 3 Installation

More information

ACCESSORIES FOR SZE2 CABINETS

ACCESSORIES FOR SZE2 CABINETS ZPAS 143 DOORS Doors Intended for use instead of front solid door or rear panel. Maximum door opening angle: 120 Sheet steel textured powder paint, light grey (RAL 7035), stiffened profiles, brown smoked

More information

POWER PULSE VALVES integral pilot (external exhaust) threaded or Quick Mount connection 3/4 to 1 1/2

POWER PULSE VALVES integral pilot (external exhaust) threaded or Quick Mount connection 3/4 to 1 1/2 POWER PULSE VALVES integral pilot (external exhaust) threaded or Quick Mount connection 3/4 to 1 1/2 NC 2/2 Series 353 X003GB2009/R8 EATURES The piston cartridge pulse valves are especially designed for

More information