Type 4X Panel Enclosures

Transcription

1 Ground-Mount Enclosures Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing out frames Replacement handle See ccessories section pplication Houses electrical controls and electrical instruments in harsh environments Provides quick and easy access indoors and out Protects against circulating dust, falling dirt, dripping non-corrosive liquids, rain, sleet, ice, splashing and hose directed water Standards UL 508 Listed, Type 3R, Type 4, Type 4X and Type 12 S 22.2 No. 94 ertified, Type 3R, Type 4, Type 4X and Type 12 onforms to NEM Standard for Type 3R, Type 4, Type 4X and Type 12 Meets NEM Type 3R requirements E.I.. RS-310- NSF riteria -2 onstruction Enclosure and door are fabricated from (12) gauge steel ll continuous welded seams are finished smooth oors are secured to the body with a heavy duty concealed lift-off hinge and a 3-point vault handle locking mechanism on each door Removable center post oors have a fixed, oil-resistant gasket Ground stud provided on doors and bodies Print pocket provided Large lifting eyes are integrated with sides of enclosure Mounting channels are welded inside for locating panels or rack mounts along enclosure depth, as well as studs for fixed panels Swing panels, single full and single half panels can be installed in double-door enclosures when the center post is used variety of optional panels and accessories are available Finish oors and sides of body have a smooth #4 brushed finish 102 ETON ORPORTION May 2013

2 Ground-Mount Enclosures Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet Enclosure Enclosure Size x epth xx Type 304 Type 316L in. mm. in. mm. in. mm. HES XS HES XSS x x x 1219 x HES XS HES XSS x x x 1219 x HES XS HES XSS x x x 1219 x HES XS HES XSS x x x 1219 x HES XS HES XSS x x x 1524 x HES XS HES XSS x x x 1524 x HES XS HES XSS x x x 1524 x HES XS HES XSS x x x 1524 x HES XS HES XSS x x x 1524 x HES XS HES XSS x x x 1524 x HES XS HES XSS x x x 1524 x HES XS HES XSS x x x 1524 x HES XS HES XSS x x x 1829 x HES XS HES XSS x x x 1829 x HES XS HES XSS x x x 1829 x HES XS HES XSS x x x 1829 x E (53) integrated lifting eyes sloped trough collar lighting bracket concealed lift-off hinges E Min=-2.60 (66) Max=-3.20 (81) removable center post / (50) padlockable 3-point locking mechanism 5.43 (138) 2.00 (51) adjustable back & side panel provisions body stiffeners (100) 4.09 (104) Front View adjustable top & bottom provisions 2.65 (67) grounding & bonding provisions on door & body Side View ETON ORPORTION May

3 Free-Standing Enclosure ccessories Type 4X Single-oor Full and Half Illustration Sheet and atalog Number Full (Single-oor) Half (Single-oor) x x atalog # in. mm. in. mm. in. mm. HF6024P x x x x 610 HF6036P x x x x 914 HF7224P x x x x 610 HF7230P x x x x 762 HF7236P x x x x 914 HF9024P x x x x 610 HF9036P x x x x 914 atalog # in. mm. in. mm. in. mm. HF6024HP x x x x 610 HF6036HP x x x x 914 HF7224HP x x x x 610 HF7230HP x x x x 762 HF7236HP x x x x 914 HF9024HP x x x x 610 HF9036HP x x x x panel side bracket included (see illustration #1 page 110 and detail sheet page 111) Half (upper mount) Full Half (lower mount) Full Mounting Half Mounting Note: Full and half panel for single-door, single and dual-access enclosures are (12) gauge steel and furnished with panel side brackets and all necessary for channel and panel. Half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back. 104 ETON ORPORTION May 2013

4 Free-Standing Enclosure ccessories Type 4X ouble-oor Full Illustration Sheet and atalog Number x atalog # in. mm. in. mm. in. mm. in. mm. HF6048P x x x x 1219 HF6060P x x x x 1524 HF7248P x x x x 1219 HF7260P x x x x 1524 HF7272P x x x x 1829 HF9048P x x x x 1219 HF9072P x x x x panel side bracket included (see illustration #1 page 110 and detail sheet page 111) Full center post included with double-door full panel (see illustration #5 page 110) Full Mounting Notes: Full panel for double-door, single and dual-access enclosures are (10) gauge steel and furnished with panel brackets, center post assembly, panel handle kit and all necessary for channel and panel. The center post assembly offers additional support of panel and equipment. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back. ETON ORPORTION May

5 Free-Standing Enclosure ccessories Type 4X ouble-oor, Half Illustration Sheet and atalog Number x atalog # in. mm. in. mm. in. mm. in. mm. HF6048HP x x x x 1219 HF7248HP x x x x 1219 HF7260HP x x x x 1524 HF7272HP x x x x 1829 HF9048HP x x x x 1219 HF9072HP x x x x panel side bracket included (see illustration #1 page 110 and detail sheet page 111) Half (upper mount) Half (lower mount) Half Mounting center post or double-door panel support bracket (sold separately) (see illustration #5 page 110) Note: Half panel for double-door, single and dual-access enclosures are (12) gauge steel and furnished with panel brackets and all necessary for channel and panel. center post assembly or a double-door panel support bracket (catalog number HFSUP2) for additional support of the panel is optional and sold separately. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back. 106 ETON ORPORTION May 2013

6 Free-Standing Enclosure ccessories Type 4X, Side and enter Post Illustration Sheet and atalog Number x enter Post Fits Enclosure Height atalog # in. mm. in. mm. in. mm. in. mm. HF6018SP x x HF7218SP x x HF7224SP x x HF9018SP x x HF9024SP x x * ack panels restrict the movement of side panels and will prohibit in some depths. See detail sheet for back panel spacing. atalog # in. mm. in. mm. in. mm. HF60PS HF72PS HF90PS (54) Side Side Mounting Side panels are (12) gauge steel and furnished with necessary for channel. They will fit any width enclosure and are adjustable along its depth, however, when full or half panels are installed, movement will be restricted and with some depths make side prohibitive. enter Post ssembly enter post assembly is furnished with all double-door full panels and includes necessary for channel and panel. The center post is optional on double-door half panels and swing panel and must be ordered separately. It attaches to the top and bottom channels making it adjustable along the depth of the enclosure. See illustration #5 on the etail Sheet on page 110. ETON ORPORTION May

7 Free-Standing Enclosure ccessories Type 4X Single-oor, Full and Half Swing Illustration Sheet and atalog Number Full Swing (Single oor) Half Swing (Single oor) x x atalog # in. mm. in. mm. in. mm. HF6024SWP x x x x 610 HF6036SWP x x x x 914 HF7224SWP x x x x 610 HF7230SWP x x x x 762 HF7236SWP x x x x 914 HF9024SWP x x x x 610 HF9036SWP x x x x 914 atalog # in. mm. in. mm. in. mm. HF6024HSWP x x x x 610 HF6036HSWP x x x x 914 HF7224HSWP x x x x 610 HF7230HSWP x x x x 762 HF7236HSWP x x x x 914 HF9024HSWP x x x x 610 HF9036HSWP x x x x (81) 2.06 (52) 3.18 (81) 2.06 (52) hinge swing panel bracket assembly included (See detail sheet page 112) Half Swing (upper mount) hinge Full Swing panel side bracket included (see illustration #1 page 110 and detail sheet page 112) hinge Half Swing (lower mount) Full Swing Mounting Half Swing Mounting Note: Full swing panel and half swing panel for single-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge swing panel bracket and furnished with panel brackets and all necessary for channel and panel. s can be installed so they hinge on either the left or right side. In addition, half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to be adjustable along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the front. With dual-access enclosures, full and half swing panels can be mounted back-to-back. 108 ETON ORPORTION May 2013

8 Free-Standing Enclosure ccessories Type 4X ouble-oor, Full and Half Swing Illustration Sheet and atalog Number Full Swing (Single-oor) Half Swing (Single-oor) x x atalog # in. mm in. mm in. mm HF6024SWP x x x x 1219 HF7224SWP x x x x 1219 HF7230SWP x x x x 1524 HF7236SWP x x x x 1829 HF9024SWP x x x x 1219 HF9036SWP x x x x 1829 atalog # in. mm in. mm in. mm HF6024HSWP x x x x 1219 HF7224HSWP x x x x 1219 HF7230HSWP x x x x 1524 HF7236HSWP x x x x 1829 HF9024HSWP x x x x 1219 HF9036HSWP x x x x 1829 enter post assembly and center bracket must be ordered separately (81) 3.18 (81) panel center bracket (sold separately) (see illustration #2 page 110) hinge Full Swing hinge Half Swing (lower mount) swing panel bracket assembly included (see detail sheet page 112) Swing Mounting center post and panel center bracket (sold separately) (see illustration #2 and #5 page 110) Note: Full swing panel and half swing panel for double-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge swing panel bracket, and furnished with necessary for side channel. center post assembly and center bracket must be ordered separately. s can be installed so they hinge either on the left or right side. In addition, half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to adjust along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the front. With dualaccess enclosures, full and half swing panels can be mounted back-to-back. ETON ORPORTION May

9 Free-Standing Enclosure ccessories Type 4X Miscellaneous ccessories Illustration Sheet and atalog Number Miscellaneous ccessories atalog # escription Illustration Quantity HFSRKT1 side bracket 1 1 HFRKT3 center bracket 2 3 HFMH3 hannel 3 3 HFPSUP2 ouble-door panel support bracket 4 2 See page 107 enter post assembly 5 1 center bracket channel spring nut panel nut panel stud side bracket channel panel nut bracket Illustration 1 Illustration 2 bracket panel stud channel spring nut channel center post Illustration 3 panel bolt panel bolt panel bolt panel nut install panel bolt in this hole for top of panel support panel bolt channel panel support bracket channel spring nut panel stud panel nut channel bracket panel nut center post center post bracket post bracket channel spring nut Illustration 4 Illustration 5 See catalog page ETON ORPORTION May 2013

10 Free-Standing Enclosure etails Type 4X and Enclosure etail Sheet enclosure width (146) 2.87 min 3.00 min (76) 2.87 Single oor (section view showing full panels mounted back-to-back) 3.75 min (95) 2.87 min 1/2 enclosure width (146) 2.87 L ouble oor (section view showing full panels mounted back-to-back) (of enclosure) ETON ORPORTION May

11 Free-Standing Enclosure etails Type 4X Swing and Enclosure etail Sheet enclosure width (154) min 5.00 min (127) 3.18 (81) Single oor (section view showing swing panels mounted back-to-back) 3.18 (81) 1/2 enclosure width (154) 2.87 min 5.00 min (127) 2.87 ouble oor (section view showing swing panels mounted back-to-back) L (of enclosure) 112 ETON ORPORTION May 2013

12 Free-Standing Enclosure ccessories Rack Mounting ngles Illustration Sheet and atalog Number Heavy duty rack angles are designed for 19 (482mm) equipment in free-standing enclosures. center post assembly, HFxxPS, on page 107, and a panel center bracket, HFRKT3, on page 110, (each sold separately) are required when in any double door enclosure. Mounting holes are spaced at the 19 EI standard and are provided to accept #10-32, #12-24, or M6 cage nuts (sold in packages of 100), on page 114. L Shaped Mounting ngles L Equipment Mounting Holes to ccept #10-32, #12-24, or M6 age Nuts (Sold Separately) Note: L-shaped angles are universal and can be rotated to accommodate 19 or 23 EI equipment (38) Mounting ngles Height L Mounting U s atalog # in. mm in. mm HES-48RM-L HES-60RM-L HES-72RM-L HES-90RM-L Kit contains two (2) full length L angles, installation instructions and necessary to mount in single-door enclosures. Yellow Zinc finish (89) ngle Profile Hole Pattern E.375 (9) Square Hole = 1.75 (44) =.625 (16) =.500 (13) =.295 (7) E =.250 (6) L Equipment Mounting Holes to ccept #10-32, #12-24, or M6 age Nuts (Sold Separately) 1.44 (36) O...75 (19) 2.29 (58) O.. ngle Profile 1.50 (38) O.. Mounting ngles U Shaped Mounting ngles Height Kit contains two (2) full length U angles, installation instructions and necessary to mount in single-door enclosures. Yellow Zinc finish. Hole Pattern E L.375 (9) Square Hole Mounting U s atalog # in. mm in. mm HES-48RM-U HES-60RM-U HES-72RM-U HES-90RM-U = 1.75 (44) =.625 (16) =.500 (13) =.295 (7) E =.250 (6) ETON ORPORTION May

13 Free-Standing Enclosure ccessories Frames & Fasteners Illustration Sheet and atalog Number Swing-Out Rack Mounted Frame Mounting ngles Height atalog # in. mm in. mm HES-48SORMF HES-60SORMF HES-72SORMF HES-90SORMF L Heavy duty swing-out rack frames are designed for 19 (482mm) equipment in free-standing enclosures. center post assembly, HFxxPS, on page 107 and panel center bracket, HFRKT3, on page 110, (each sold separately) are required when in any double door enclosure. Mounting holes are spaced per the EI standard and are provided to accept #10-32, #12-24 or M6 cage nuts (sold in packages of 100). Swing-out rack frames have white powder coated finish. Equipment Mounting Holes to ccept #10-32, #12-24, or M6 age Nuts (Sold Separately - See elow) L Hole Pattern E.375 (9) Square Hole = 1.75 (44) =.625 (16) =.500 (13) =.295 (7) E =.250 (6) (494) O.. atalog # HE2-M-1032-PHMS-100 HE2-M-1224-PHMS-100 HE2-M-M6-PHMS-100 Screw Type #10-32 Phillips #12-24 Phillips M6 Phillips atalog # HE2-M-N HE2-M-N HE2-M-N-M6-100 Sold in bags of 100. age Nut Type #10-32 Tapped #12-24 Tapped M6 Tapped 114 ETON ORPORTION May 2013

14 Free-Standing Enclosure ccessories Floor Stand & Enclosure Stabilizer Kits Illustration Sheet and atalog Number Floor stand kits are intended for use with EnviroShield Type 4X, Type 4 and Type 12 enclosures where floor support is required. Each kit consists of two (10) gauge legs and for. t the base of each leg is a pre-punched plate (see drawing). Steel kits have a gray polyester powder paint finish. Stainless steel kits are fabricated from 304 stainless steel. Standard floor stand kits are 12 inches (305 mm) high. For special heights, special material or non-standard construction, consult factory. atalog # Steel Stainless in. mm. in. mm. in. mm. HMFK12 HMFK12XS HMFK16 HMFK16XS HMFK20 HMFK20XS HMFK24 HMFK24XS L.75 (19) Sanitary Leg Kit atalog # HES-SMFK6 Hex Nut escription Set of four (4) legs Kit allows space between enclosure and floor for compliance in NSF environments 1-3/4 (44mm) adjustment provides flexibility in all applications. Four (4) legs per kit, maintains UL/cUL Type 4X rating when properly installed. Flat Washer 6.00 (152).75 (19) Sealing Washer Leg Sleeve 1.75 (44) djustment ETON ORPORTION May