Free-Stand, Single or Dual Access, Type 12
|
|
|
- Victor Wiggins
- 5 years ago
- Views:
Transcription
1 Spec ree-stand Enclosures Type 12 ree-stand Enclosures ree-stand, Single or Dual Access, Type 12 INDUSTRY STANDARDS UL 508A Listed; Type 12; ile No. E61997 cul Listed per CSA C22.2 No. 94; Type 12; ile No. E61997 NEMA/EEMAC Type 12 E.I.A. RS310D CSA, ile No , Type 12 IEC 60529, IP55 Applicable industry standards only for enclosures with Seismic Accessories: NEBS- Telcordia R-63-CORE Zone 4, tested with 1000lbs evenly distributed OSHPD Pre-Approval OPM APPLICATION Available with front or front and rear access, these Type 12 enclosures have sturdy unibody construction and flexible internal mounting options. SPECIICATIONS 12 gauge steel Seams continuously welded and ground smooth; no holes or knockouts Stiffeners on back of two-door enclosures maintain flatness and increase rigidity Lifting eyes for easy handling 3-point latches operated by oil-tight key-locking handle Concealed, easy-to-remove hinges Data pockets are high-impact thermoplastic Internal mounting channels welded horizontally to sides at top, bottom and center Optional panels and rack mount angles can be mounted anywhere along channels Oil-resistant door gasket Bonding provision on door Provision for mounting fluorescent light INISH Two finishes available: ANSI 61 gray, polyester powder paint outside and inside; or ANSI 61 gray outside and white, polyester powder paint inside. Optional panels available with a white or conductive finish. ACCESSORIES Plate Casters Electric Heater Door Stop Kit Compact Cooling ans PANELITE Enclosure Lights Overview Seismic Mounting Plate Kits Seismic Panel Mounting Kits ull Panels Rack Mounting Angles, L-Style (Type RP), ull Length See also the Popular Cooling Products and Accessories tables following the Standard Products tables. MODIICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: A30 1 Mild Steel SUBJECT TO CHANE WITHOUT NOTICE EQUIPMENT PROTECTION
2 ree-stand Enclosures Type 12 ree-stand Enclosures Standard Product One-Door Single-Access Catalog Number AxBxC in. AxBxC mm Interior inish A602418S x x x 611 x 459 ray A602418S x x x 611 x 459 White A722418S x x x 611 x 459 ray A722418S x x x 611 x 459 White A723018S x x x 764 x 459 ray A723018S x x x 764 x 459 White A723618S x x x 916 x 459 ray A723618S x x x 916 x 459 White A902420S x x x 611 x 510 ray A902420S x x x 611 x 510 White A903620S x x x 916 x 510 ray A903620S x x x 916 x 510 White A603624S x x x 916 x 611 ray A603624S x x x 916 x 611 White A722424S x x x 611 x 611 ray A722424S x x x 611 x 611 White A723024S x x x 764 x 611 ray A723024S x x x 764 x 611 White A723624S x x x 916 x 611 ray A723624S x x x 916 x 611 White A903624S x x x 916 x 611 ray A903624S x x x 916 x 611 White A723630S x x x 916 x 764 ray A723630S x x x 916 x 764 White A723636S x x x 916 x 916 ray A723636S x x x 916 x 916 White A903636S x x x 916 x 916 ray A903636S x x x 916 x 916 White our lifting eyes are furnished if C = (764mm) or more. Removable x (305mm x 305mm) data pocket included. Seismic accessories are available for one-door enclosures. EQUIPMENT PROTECTION PH AX pentairprotect.com Mild Steel 2
3 ree-stand Enclosures Type 12 ree-stand Enclosures Standard Product One-Door Dual-Access Catalog Number AxBxC in. AxBxC mm Interior inish A722424SDA x x x 611 x 611 ray A722424SDA x x x 611 x 611 White A723024SDA x x x 764 x 611 ray A723024SDA x x x 764 x 611 White A723624SDA x x x 916 x 611 ray A723624SDA x x x 916 x 611 White A903624SDA x x x 916 x 611 ray A903624SDA x x x 916 x 611 White A722430SDA x x x 611 x 764 ray A722430SDA x x x 611 x 764 White A722436SDA x x x 611 x 916 ray A722436SDA x x x 611 x 916 White A723636SDA x x x 916 x 916 ray A723636SDA x x x 916 x 916 White A903636SDA x x x 916 x 916 ray A903636SDA x x x 916 x 916 White our lifting eyes are furnished if C = (764mm) or more. Removable x (305mm x 305mm) data pocket. Seismic accessories are available for one-door enclosures. 3 Mild Steel SUBJECT TO CHANE WITHOUT NOTICE EQUIPMENT PROTECTION
4 ree-stand Enclosures Type 12 ree-stand Enclosures Standard Product Two-Door Single-Access Catalog Number AxBxC in. AxBxC mm Interior inish H H J J A604818SD x x x 1221 x 459 ray A604818SD x x x 1221 x 459 White A724818SD x x x 1221 x 459 ray A724818SD x x x 1221 x 459 White A726018SD x x x 1526 x 459 ray A726018SD x x x 1526 x 459 White A727218SD x x x 1830 x 459 ray A727218SD x x x 1830 x 459 White A904820SD x x x 1221 x 510 ray A904820SD x x x 1221 x 510 White A907220SD x x x 1830 x 510 ray A907220SD x x x 1830 x 510 White A724824SD x x x 1221 x 611 ray A724824SD x x x 1221 x 611 White A726024SD x x x 1526 x 611 ray A726024SD x x x 1526 x 611 White A727224SD x x x 1830 x 611 ray A727224SD x x x 1830 x 611 White A907224SD x x x 1830 x 611 ray A907224SD x x x 1830 x 611 White A726036SD x x x 1526 x 916 ray A726036SD x x x 1526 x 916 White A907236SD x x x 1830 x 916 ray A907236SD x x x 1830 x 916 White our lifting eyes are furnished if C = (764mm) or more. Removable x (305mm x 305mm) data pocket. Seismic accessories are not applicable for two-door enclosures. EQUIPMENT PROTECTION PH AX pentairprotect.com Mild Steel 4
5 ree-stand Enclosures Type 12 ree-stand Enclosures Standard Product Two-Door Dual-Access Catalog Number AxBxC in. AxBxC mm Interior inish A724824SDAD x x x 1221 x 611 ray A724824SDAD x x x 1221 x 611 White A726024SDAD x x x 1526 x 611 ray A726024SDAD x x x 1526 x 611 White A727224SDAD x x x 1830 x 611 ray A727224SDAD x x x 1830 x 611 White A726036SDAD x x x 1526 x 916 ray A726036SDAD x x x 1526 x 916 White A907224SDAD x x x 1830 x 611 ray A907224SDAD x x x 1830 x 611 White our lifting eyes are furnished if C = (764mm) or more. Removable x (305mm x 305mm) data pocket. Seismic accessories are not applicable for two-door enclosures. Popular Cooling Products Popular Cooling Solution Air Conditioner Catalog Numbers Popular Accessories Enclosure Width (B Dimension) Lights Hole Seals Window Kits 24 in. (610 mm) LED24V15 AS050 APWK53N 30 in. (762 mm) LED24V15 AS050 APWK53N 36 in. (914 mm) LED24V15 AS050 APWK53N in. (1221 mm LED24V15 AS050 APWK53N in. (1525 mm) LED24V15 AS050 APWK53N in. (1830 mm) LED24V15 AS050 APWK53N 5 Mild Steel SUBJECT TO CHANE WITHOUT NOTICE EQUIPMENT PROTECTION
6 Seismic Accessories Seismic Accessories Seismic Accessories To meet R-63-CORE Zone 4 seismic standards, ree-stand enclosures must include the following accessories (purchased separately): or Seismic ree-stand with Panel Seismic Mounting Plate Kit Seismic Panel Mounting Kit Panel, ull-length or Seismic ree-stand with Rack Angles Seismic Mounting Plate Kit Rack Mounting Angles - L-Style (Type RP), ull Seismic Mounting Plate Kits Kit of four (4) stainless steel mounting plates install in the corners at the base of the enclosure. The mounting plates come pre-drilled to accept 1/2-in., 5/8-in. or 3/4-in. diameter mounting hardware (not included). Bulletin: DCY Standard Product Catalog Number Description Anchor Size ASMP12SS Seismic Mounting Plate, 1/2-in. 1/2 in. ASMP58SS Seismic Mounting Plate, 5/8-in. 5/8 in. ASMP34SS Seismic Mounting Plate, 3/4-in. 3/4 in. Seismic Panel Mounting Kits Kit of two(2) panel supports install within the enclosure. Use mounting hardware furnished within these kits along with panel hardware to mount full panels. Bulletin: DCY Standard Product its Enclosure A Catalog Number Description in./mm ASPANKIT60 Seismic Panel Mounting Kit, 60-in ASPANKIT72 Seismic Panel Mounting Kit, 72-in ASPANKIT90 Seismic Panel Mounting Kit, 90-in Panels ull panels mount within the enclosure using seismic panel mounting kits. Panels are 12 gauge steel and are finished with white polyester power paint or a conductive, corrosion resistant coating. Bulletin: PNL30, PNLS Standard Product Catalog Number Description Panel Size in./mm A60P241 Steel x x 508 A60P241 Conductive x x 508 A72P241 Steel x x 508 A72P241 Conductive x x 508 A90P241 Steel 1829 x x 508 A90P241 Conductive 1829 x x 508 A72P301 Steel x A72P301 Conductive x A60P361 Steel x x A60P361 Conductive x x A72P361 Steel x x 813 A72P361 Conductive x x 813 A90P361 Steel x x 813 A90P361 Conductive x x 813 its Enclosure A x B in./mm x x x x x x x x x x x x x x x x x x x x x x 914 EQUIPMENT PROTECTION PH AX pentairprotect.com Accessories 6
Standard Product. Type 4 Free-Stand Enclosures and Accessories
763.422.2600 Spec-00294 F763.422.2211 Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand, Type 4 INDUSTRY STANDARDS
Standard Product Low Profile Type 12 One-Door Disconnect Enclosures
763.422.2600 Spec-00005 M763.422.2211 Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Low-Profile, One- to Five-Door
Wall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type 12
763.422.2600 SPEC-00245 L763.422.2211 DISCONNECT WALL-MOUNT PREFERRED-CUTOUT DISCONNECTS PREFERRED CUTOUT, DISCONNECTS, TYPE 12 Wall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type
Wall-Mount Enclosures CONCEPT Wall-Mount Enclosures
Spec-00286 H763.422.2211 763.422.2600 Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures, Type 4 and 12 INDUSTRY STANDARDS Wall-mounting brackets required to maintain
ACCESSORIES Electric Heater Compact Cooling Fans Floor Stand Kit PANELITE Enclosure Lights BULLETIN: A28SX
763.422.26 SPEC-177 B763.422.2211 DISCONNECT SEQUESTR PREFERRED-CUTOUT DISCONNECTS SEQUESTR EXTERNAL DISCONNECTS SEQUESTR PrefERREd-CutoUT DisconnECTS SEQUESTR ExTERnal Disconnects STAINLESS STEEL SEQUESTR
Preferred Cutout, Disconnect Enclosure, Type 12
763.422.2600 Spec-00245 J763.422.2211 Wall-Mount Preferred-Cutout s Preferred Cutout, s, Type 12 Wall-Mount Preferred-Cutout s Preferred Cutout, s, Type 12 Preferred Cutout, Enclosure, Type 12 INDUSTRY
Standard Product. Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories
Spec-00144 Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories ULTRX WiFi, Type 4X INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cul Listed per CSA C22.2
Rack Mount devices shown not included Custom cabinet shown
763.422.2588 SPEC-00215 M763.422.2661 NETWORKING OUTSIDE PLANT PRODUCTS COMLINE OSP WALL-MOUNT CABINET PACKAGE AND ACCESSORIES Outside Plant Products COMLINE OSP Wall-Mount Cabinet Package and Accessories
Guides (s-3482) Slides (s-2568) Rack-Mount Accessories. Accessories: Mounting Accessories
Spec-00500 D(763) 422-2211 422-2600 Accessories Mounting Accessories Guides (s-3482) 14 gauge steel chassis guides mount between two pairs of rackmounting angles that have accessory mounting legs. Guides
Type 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
Panel Size. Conductive
Spec-00402 ULTRX, Type 4X INDUSTRY STANDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E697 cul Listed per CSA C22.2
EQUIPMENT PROTECTION
Contractor Specifier s Guide EQUIPMENT PROTECTION WWW.PENTAIRPROTECT.COM/HOFFMAN Volume 8 Hoffman Has You Covered From utility junctions to protecting relays, contactors and wire, Hoffman has you covered.
ULTRX, Type 4X. Panel Size. Conductive
Spec-00402 EPH FX (763) 422-2600 422-21 Non-Metallic Fiberglass Industry Standards Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File
Guides. Slides. Mounting Accessories Rack-Mount Accessories
Spec-00500 Mounting Accessories Rack-Mount Accessories Guides 14 gauge steel chassis guides mount between two pairs of rackmounting angles that have accessory mounting legs. Guides and mounting hardware
Wall-Mount Cabinets ACCESSPLUS II Double-Hinge
763.422.2588 SPEC-00534 G763.422.2661 NETWORKING WALL-MOUNT CABINETS ACCESSPLUS II DOUBLE-HINGE Wall-Mount Cabinets ACCESSPLUS II Double-Hinge ACCESSPLUS II DOUBLE-HINGE, TYPE 1 INDUSTRY STANDARDS UL 508A;
Technical Operating Information AC Unit (T150116G100) Replacement Filter No
763.422.2600 EC-00713 G763.422.2211 NETWORKING WALL-MOUNT CABINET ROTEK INGLE-DOOR AND DOUBLE-HINGED CABINET Wall-Mount Cabinets ROTEK ingle-door and Double-Hinged Cabinets ROTEK DOUBLE-HINGED, UL AND
Pedestals and Pedestal Accessories
Spec-00485 IPH FX (763) 422-2600 422-2211 HMI - Human-Machine Interface Mounting Options Pedestals Pedestals enable many types of enclosures and boxes to be floor mounted. Four columns and two bases are
Standard Product Hinged Back Plate
Spec-01177 HMI Enclosures and Accessories SYSPEND Aluminum HMI Enclosures and Accessories SYSPEND Aluminum HMI Enclosures, Type 12 INDUSTRY STANDARDS UL 508A Listed; Type 12; File No. E61997 cul Listed
Wall-Mount Cabinets ACCESSPLUS Double-Hinge
Spec-00534 Wall-Mount Cabinets ACCESSPLUS Double-Hinge ACCESSPLUS Double-Hinge, Type 1 INDUSTRY STANDARDS UL 508A; Type 1; File No. E61997 cul Listed per CSA C22.2 No. 182.4; File No. E230874 EIA 310-D
Modular Enclosure Solutions Specifier s Guide
Modular Enclosure Solutions Specifier s Guide EQUIPMENT PROTECTION WWW.PENTAIRPROTECT.COM/HOFFMAN Volume 1 The Next Generation Modular Enclosure Stronger. Faster. Easier. You ve already spent tens of thousands
Type 4 Panel Enclosures
Type 4 Lift-Off Cover ata Sheet Seamless poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use Protects against windblown dust and rain, splashing
Wall-Mount Enclosures
Wall-Mount Enclosures Protection When Safety Matters Most When selecting an enclosure, application can be associated with market or product. For example, is your enclosure going to be used in a petrochemical
Chapter Contents. Outside Plant Products
PH FX (763) 422-2588 422-2661 : Chapter Contents Outside Plant Products COMLINE Wall-Mount Enclosures and Accessories COMLINE, Type 4X................................................ 2 Mounting Panel...................................................
PH (763) FX (763) hoffmanonline.com
PH (763) 422-2211 FX (763) 422-2600 : 1 ContractorType 1 Chapter Contents Screw-Cover Type 1 Pull Boxes and Accessories Screw-Cover, Type 1............................................... 3 Type 1 Pull
SERIES 14 SINGLE DOOR CONSOLES TECHNICAL DATA
Operator System Enclosures 1 12 SAGINAW CONTROL ENGINEERING STOCK PRICE LIST SAGINAW CONTROL ENGINEERING STOCK PRICE LIST 13 Series 1 Single Door Consoles Application - Designed for electronic controls
133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST
133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s are designed for control and instrumentation applications. They are a general-purpose enclosure intended for indoor use
Type 4 Panel Enclosures
Wall-Mount Enclosures Type 4 Premier Series with Quarter-Turn Latches Data Sheet and Catalog Number Accessories Premier panels NEMA panel adapters Depth adjustment brackets Print pockets Padlockable or
CLIMAGUARD Outdoor Heat Exchangers
Product Overview : CLIMAGUARD Outdoor Heat Exchangers TX23 Model TX38 Model TX52 Model 132 Product Overview : Lab- and field-tested to seal out extreme weather CLIMAGUARD Outdoor Heat Exchangers PRODUCT
FREE-STANDING ENCLOSURE ACCESSORIES FREE-STANDING ENCLOSURE ACCESSORIES. Swing-Out Panels. Panels (Full & Half Length) For Single-Door Enclosures
118 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 11 ENCLOSURE Panels (Full & Half Length) For Single-Door Enclosures Panels for single-door enclosures can
C-Box Screw Cover with Knockouts NEMA 1. Commercial Enclosures Junction Boxes
C-Box Screw Cover with Knockouts Application Designed for general purpose indoor commercial use as a junction, pull or switch box. Standards UL-50 Type 1 cul Type 1 Complies with: NEMA Type 1 IEC 60529,
ACCESSPLUS II Double-Hinge, Type 1
II Double-Hinge, Type 1 Industry Standards UL 508A; Type 1; File No. E61997 cul Listed per CSA C22.2 No. 182.; File No. E23087 EIA 310-D NEMA/EEMAC Type 1 EIC 60529 IP20 Per BICSI TDMM Tenth edition, Chapter
Commercial Boxes and Enclosures COM-24 COM-66
and Count on Hoffman to provide you with off-the-shelf innovation features to save you time and money. Perforated panels make component layout and mounting fast, easy, and flexible. Integral wood panels
Wedge Consoles Joining Kit Full Back Panel Side-Mount Panel Caster Kit Bulletin: P11. E mm/in
Spec-01204 OLI old Series esk Consoles esk Consoles and Accessories old Series esk Console, Type 12 ALICATIO The OLI old Series esk Console provides an ideal surface for mounting MI controls such as keyboards,
Panel, 18.20x14.20, Bulletin CWP (CONCEPT Enclosure Panels),
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Features Material Material, Color, and Finish
Operator Enclosures. Console Type 12 - AW-14 Data Sheet
Console Data Sheet Construction Console body, panel cover and door, top assembly and writing desk are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Panel cover is secured
Type 4X Panel Enclosures
Wall-Mount Enclosures Type 4X Premier Series with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge Type 304 or Type 316L stainless steel (see pages 209 & 210)
Perforated Panels. Panels and Panel Accessories Panels for Enclosures
73.422.200 Spec-00310 U73.422.2211 Panels and Panel Panels for Enclosures Panels and Panel Panels for Enclosures Perforated Panels Perforated panels are 1 gauge steel and accept self-tapping screws and
Shelves, Keyboard Trays and Gland Plates Folding Shelves
SPEC-00035 Shelves, Keyboard Trays and Gland Plates Folding Shelves STAINLESS STEEL FOLDING SHELF Size AxB in./mm ACSHELF1212SS 12.00 x 12.00 305 x 305 ACSHELF1818SS 18.00 x 18.00 457 x 457 ACSHELF2424SS
RACK ANGLES OVERVIEW. Standard Product
SPEC-01200 PROLINE G2 Internal Components Rack-Mount Angles and Accessories RACK ANGLES OVERVIEW All Rack Angles have two mounting surfaces that serve as mounts for both rack equipment and rack accessories.
Networking: Wall-Mount Cabinets PROTEK Wall-Mount and Double-Hinge Cabinets PROTEK Single-Door Fan and Filter Thermal Packages, UL and NEMA Type 1
PROTEK Single-Door Fan and Filter Thermal Packages, UL and NEMA Type 1 Industry Standards UL 508A Listed; Type 1; File Number E619967 cul Listed per CSA C22.2 No. 9; Type 1; File Number E61997 NEMA / EEMAC:
Heavy-Duty Enclosures Type 12 Free Standing Disconnect with Sub Panel
eavy-uty Enclosures PPLICTIONS - esigned to provide protection for electrical instruments, terminals, and controls from dust, oil, dirt and dripping liquids. CONSTRUCTION - abricated from 10 gauge carbon
NEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series
NEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series Applications N412_CD Series Designed to house the following: AutomationDirect.com NEMA 1/12 Flexible shaft handle for Molded
NEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series
NEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series Applications SN4 Series Designed to house the following: Allen-Bradley Bulletin 1494V disconnect switches with flange-mounted variable
Disconnect Enclosures
Type 12 Heavy-Duty Single & Multi-Door Data Sheet pplication Houses electrical controls and equipment Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508
CHAPTER4 Wall-Mount Cabinets
: CHAPTER Wall-Mount Cabinets Protect your electronics investment with space-saving solutions from Pentair Technical Products Hoffman brand. In schools, factories, retail outlets and government centers
Operator System Enclosures
27 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 Operator Systems are designed to house a wide variety of equipment; panel mount, rack mount, desktop PC s, monitors,
Type 12 / 13 Enclosures
Type 12 Free-Standing Enclosures ata Sheet pplication Houses electrical controls and instruments Easy access fixed or swing panels for optional equipment ual-access construction available for back-to-back
Type 4X Panel Enclosures
Type 4X Lift-Off Cover ata Sheet Seamless, poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
Type 4X Panel Enclosures
Ground-Mount Enclosures Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing
Mounting Options CS480 Stainless Steel Pendant Arm System IEC 60529, IP66
Spec-00045 I763.422.2211 763.422.2600 Mounting Options CS480 Stainless Steel Pendant Arm System Mounting Options CS480 Stainless Steel Pendant Arm System CS480 Stainless Steel Pendant Arm System INDUSTRY
[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]
![[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]](/thumbs/95/124192199.jpg "[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]")
[ SOLUTIONS FOR AUTOMATION & ONTROL DEVIES: ] INDUSTRY STANDARDS Solid hinged cover models. Mounting brackets required to meet UL/SA external mounting requirements. FEATURES remove and -install hinge pins
Standard Product. Polyester powder paint; RAL 7035 textured light gray standard Custom colors available
Spec-01193 PROLINE G2 External Components Tops Solid Top 16 gauge (1.5 ) steel Additional support provisions need to be made to support top mount air conditioners or other top mount accessories Includes
EN4DSC Disconnect Enclosures - NEMA 4 ABB Controls, Allen Bradley, Cutler Hammer, General Electric, Siemens I-T-E Max-Flex, Square D
EN4DSC Disconnect Enclosures - NEMA 4 Application Designed to house the following safety disconnect equipment: ABB Controls flange mounted variable depth operating mechanisms for disconnect switches and
Uses, Certifications, and Standards Electrical Control and Instruments, Indoor/Outdoor EXTERNAL FEET, WALL standard UL 508, CSA C22.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 121264CHC Encl 12X12X6 N4 Enclosure Cooper B-Line/Cable Tray Catalog Number Manufacturer escription Weight per unit Product
Panels for Enclosures
Spec-00310 KPH FX (73) 422-200 422-2211 Accessories Panels and Panel Accessories Accessories: Panels and Panel Accessories Perforated Panels Perforated panels are 1 gauge steel and accept self-tapping
Standard Cutout for Mounting
SPEC-00350 Mounting Options COMPACT Pendant Arm System, Series 2 COMPACT PENDANT ARM SERIES 2, TYPE 2 APPLICATION COMPACT Series 2 Pendant Arms allow operators to easily move controls into and out of position
Type 4 Panel Enclosures
Ground-Mount Enclosures Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish pplication Houses electrical controls and instruments Easy access panels or
Pushbutton Enclosures
7 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 are designed to house oil-tight pushbuttons, switches, and pilot lights. These enclosures are primarily used in
Catalog Number Material Fits CONCEPT Enclosure CCPM4 Steel When A x B is equal to or less than x in. (762 x 762 mm)
SPEC-00186 CONCEPT Accessories CONCEPT Accessories CONCEPT PANEL CONVERSION KIT Conversion Kit adapts enclosure for mounting standard NEMA-style panels in CONCEPT enclosures. Bracket attaches to rear collar
ELECTRICAL ENCLOSURES AND MODULAR CABINETS EXM MANUFACTURING LTD. Since 1975
www.exmweb.com ELECTRICAL ENCLOSURES AND MODULAR CABINETS 19 EXM MANUFACTURING LTD. Since 1975 NEMA 12-13 SAFETY DISCONNECT 9500 UxD Right flange mounted disconnect multi-door enclosure The 9500 UxD oil
Panels and Panel Accessories Panels for Enclosures
SPEC-00310 Panels and Panel Accessories Panels for Enclosures PERFORATED PANELS Perforated panels are 1 gauge steel and accept self-tapping screws and eliminate the need to measure, mark and drill when
Hazardous Location Enclosures INDEX. Hazardous Location Enclosures HAZ-2
Hoffman s new ZonEX ATEX-certified enclosures can be used in Zone 1- and Zone 2-rated applications throughout the world. Our NEMA Type 9 enclosures are designed for use in Class II Division 1 and 2 locations
Double-Sided Solid Aluminum Shelf. Double-Sided, Solid Aluminum, Heavy Duty Shelf. Single-Sided Solid Aluminum Shelf. Single-Sided Solid-Steel Shelf
Accessories Shelves for Open Frame Racks and Cabinets Double-Sided Solid Aluminum Shelf Mounts on 19-in. open frame rack. Two shelves form double-sided shelf. Uses 4U rack space. Made of 0.090-in. thick
Disconnect Enclosures
Wall-Mount Enclosures Type 12 Flange-Mount....................................................................... 296-298 Wall-Mount Enclosures Type 4 & 4X Premier Series 2-Point or 3-Point Locking..........................
CONCEPT Wall-Mount Enclosure Accessories
CONCEPT Wall-Mount Enclosure Accessories The CONCEPT Enclosure Group Accessory Selection Guide Steel section 4 or Stainless Steel Enclosures section 6 Steel section 4 or Stainless Steel Window-Door Enclosures
Phone: Fax: Web: -
empire SERIES For your largest applications, turn to the Empire Series from Allied Moulded. Fiberglass construction offers durability and strength without the excessive weight of a comparable metal enclosure.
Square-Duct Wireways. Catalog 5100CT0101R06/ Class CONTENTS Description... Page. Wireway Offerings... 3
Catalog 5100CT0101R06/11 2011 Class 5100 CONTENTS Description............................................. Page Wireway Offerings............................................ 3 General Purpose NEMA Type
Section COMMUNICATION EQUIPMENT ROOM FITTINGS. Section Communications Cabinets, Racks, Frames and Enclosures
PART 1 GENERAL 1.1 WORK INCLUDED Section 27 11 00 COMMUNICATION EQUIPMENT ROOM FITTINGS Section 27 11 16 Communications Cabinets, Racks, Frames and Enclosures A. Provide all labor, materials, and equipment
IEC 60529, IP66. Tubing: Type 304 polished stainless steel Fittings: Type 304 polished stainless steel. Brushed stainless steel shown.
CS480 STAINLESS STEEL PENDANT ARM SYSTEM INDUSTRY STANDARDS IEC 60529, IP66 APPLICATION The CS480 Stainless Steel Pendant Arm System performs extremely well in applications that require corrosion resistance
Steel Enclosures Contents
Contents 12/001 - Type S1GK and GK/SD steel enclosures for industrial control use Type CS and GKP steel enclosures for standard starters Page 12/002 12/002 Type S3GK and GK/DW weatherproof steel enclosures
Stainless Steel Feed-Through Wireway, NEMA Type 4X
Spec-00325 Feed-Through Wireway Stainless Steel Feed-Through NMA Type 4X Wireway Stainless Steel Feed-Through Wireway, NMA Type 4X INUSTRY STANARS UL 870 Listed; File No. 27524 NMA Type 4, 4X, 12 CSA,
Full Subpanel. Additional Mounting Hardware
Spec-00431 PROLINE Internal Components Panel and Grid Mounting System Full Subpanel PROLINE subpanels are designed to provide maximum panel depth, panel size and ease of installation. Full subpanels slide
Frame Joining Kits. Free-Stand Cabinets PROLINE Accessories
Spec-00212 Free-Stand Cabinets PROLINE Accessories Frame Joining Kits Permits joining two enclosure frames while maintaining an environmental seal. Side-to-Side Joining Kit consists of six frame nuts and
CONCEPT Accessories. Catalog Number Material Fits CONCEPT Enclosure CCPM4 Steel When A x B is equal to or less than x in.
Spec-00186 KPH FX (763) 422-2600 422-2211 Accessories CONCEPT Accessories Accessories: CONCEPT Conversion Kit Conversion Kit adapts enclosure for mounting standard NEMAstyle panels in CONCEPT enclosures.
PROLINE Sloped-Front HMI System and Accessories. PROLINE Sloped-Front HMI, Type 4, 4X, 12. HMI - Human-Machine Interface: HMI Enclosure Systems
Spec-00338 FPH FX (763) 422-2600 422-2211 HMI - Human-Machine Interface HMI Enclosure Systems PROLINE Sloped-Front HMI, Type 4, 4X, 12 Industry Standards Painted versions: UL 508A Listed; Type 12: File
STAINLESS STEEL ENCLOSURES EQUIPMENT PROTECTION
STAINLESS STEEL ENCLOSURES EQUIPMENT PROTECTION A SUPERIOR CORROSION PROTECTION SOLUTION offman stainless steel enclosures are designed for indoor or outdoor applications that require corrosion protection
Type 4 X Panel Enclosures
Ground-Mount s Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing out frames
RMR Free-Standing Enclosures
Protecting your technology investment. RMR Free-Standing Enclosures provide NEMA Type 4 and 12 protection for large electronic components and controls that require sturdy mounting. ADVANTAGES Advanced
An Investment in Plant Floor Safety. 802C Safety Cable Pull Switches 802E Hinge Safety Interlock Switches 802F Safety Interlock Switches
An Investment in Plant Floor Safety 802C Safety Cable Pull Switches 802E Hinge Safety Interlock Switches 802F Safety Interlock Switches Notes 2 802C Cable Pull Safety Switches Safety and Application Safety
FINISH Unpainted galvanized steel
Spec-00134 I763.422.2211 763.422.2600 Lay-In Wireway Lay-In NEMA Type 1 Galvanized Wireway Lay-In Wireway Lay-In NEMA Type 1 Galvanized Wireway Lay-In Galvanized Wireway, NEMA Type 1 INDUSTRY STANDARDS
BLTELCO-10. Telecommunications. Equipment Supports Racks Runway Cable Management
BLTELCO-10 Telecommunications Equipment Supports Racks Runway Cable Management Cooper B-Line, a division of Cooper Industries (NYSE: CBE), is a leading manufacturer of quality support systems and enclosures
Human-Machine Interface
Human-Machine Interface Enclosure and Ergonomic Solutions for Virtually Any Application nvent HOFFMAN offers a large selection of human machine interface (HMI) enclosure solutions and accessories. Attractive,
1.6 Accessories include tool-free snap-in technology options for air flow, cable management, shelves, power distribution units, etc.
Rittal TS IT Rack Guide Specifications TS IT network server enclosure 1.0 General Description 1.1 Modular Free Standing Equipment Cabinet 1.2 Various combinations of dimensions: 1.2.1 Height: 48 /1200mm,
CHAPTER10 ACCESSORIES. Featured Products - TOOL-LESS SHELF PROVIDES EXPANDABLE SURFACE FOR EQUIPMENT
ACCESSORIES CHAPTER : Create a configuration that meets your exact requirements. Select from a comprehensive assortment of accessories that complement our broad product line, including: 2-Post Racks 4-Post
Industrial Enclosures
48J Series - NEMA 2 Large JIC Enclosures Junction Boxes Application Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments. Provides a degree of protection from falling
TYPE 1 SCREW COVER WIREWAY
TYPE 1 SCREW COVER WIREWAY Construction: C & I Enclosures Type 1 Screw Cover and Hinge Cover Wireway is fabricated in accordance with U.L. specifications from code gauge steel. Wireway is furnished standard
GL66 SERIES STAINLESS STEEL HINGED COVER WALL-MOUNT ENCLOSURES
GL66 SERIES STAINLESS STEEL INGED COVER ALL-MOUNT ENCLOSURES Aesthetic styling and an attractive, stroked finish make GL66STE enclosures an excellent choice when style and functionality are important.
Hazardous Locations CHAPTER13. Hazardous Location
3.22.2211 3.22.200 CHAPTER Hazardous Location 152 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Chapter Contents Hazardous Location Enclosures and Accessories ZONEX ATEX- and IECEx-Certified, Type
Industrial Enclosures
www Eclipse Junior Series Single Door Enclosures - NEMA 12, 13, 4... 2 Series 2000, Single Door Enclosures - NEMA 12, 4... 40 1414 Series JIC Enclosures, Clamped, Lift Off Cover - NEMA 12, 13... 4 1414
CONNECT AND PROTECT. ProLine G2. The Next Generation Modular Solution
CONNECT AND PROTECT ProLine G2 The Next Generation Modular Solution The Next Generation Modular Enclosure Stronger. Faster. Easier. You ve already spent tens of thousands of dollars and hours designing
S /5000 BTU/Hr. 1000/1500 Watt
763.576.32 Spec-168 E763.422.2211 Sealed Enclosure Cooling Air Conditioners Sealed Enclosure Cooling Air Conditioners SPECTRACOOL Slim Fit Indoor S6 1/17 BTU/Hr. 3/5 Watt S1 34/5 BTU/Hr. 1/15 Watt S16
Clipper Defined. Shelving. Clipper Hi-Performance Shelving Systems. Growth with. Penco Hi-Performance Shelves. Growth with
Defined Clipper Hi-Performance Systems At the heart of the Clipper System is the ingenious Penco Clipper Clip. It is easily installed, holds the shelf firmly in place, can be repositioned at any time,
AE Wallmount FMD Enclosures AE Wallmount Carbon Steel Cabinets
FMD ENCLOSURES AE Wallmount FMD Enclosures AE Wallmount Carbon Steel Cabinets Superior in design, Rittal's AE flange mounted disconnect enclosures have fewer moving parts, which reduces assembly and installation
Mounting Options CS600 Stainless Steel Pendant Arm System IEC 60529, IP66
Spec-00355 H763.422.2211 763.422.2600 Mounting Options CS600 Stainless Steel Pendant Arm System Mounting Options CS600 Stainless Steel Pendant Arm System CS600 Stainless Steel Pendant Arm System INDUSTRY
STAINLESS STEEL ENCLOSURES
Electromechanical components STINLESS STEEL ENCLOSURES GL66 SERIES [ REEFINING STNR ] GL66 LL-MOUNT ENCLOSURES: INGE COVER [ GL66 SERIES STINLESS STEEL ] INGE COVER LL-MOUNT ENCLOSURES Manufactured in
HMI - Human-Machine Interface: Mounting Options
Mounting Options Monitor and Keyboard Arm SYSPEND Monitor and Keyboard Arm SYSPEND Monitor and Keyboard Arm Application Vertical motion pendant arm for mounting a flat screen monitor, keyboard and mouse
Number of reducing brackets required to accommodate 19- and 23-in. equipment in different cabinet widths
Spec-00153 Free-Stand Cabinets PROLINE Cabinet Cable Managers PROLINE CABLETEK Vertical Cable Manager For routing and bundling cable inside - and -mm wide PROLINE cabinets. Variety of sizes provide mounting
Design Standard. Purpose: Design Standard:
Design Standard Purpose: This design standard has the purpose of creating a consistent application of motor-control centers throughout the East Side Union High School District, therefore achieving a standard
M-2900A Tapchanger Control Cabinet
CONTROLS M-2900A Tapchanger Control Cabinet New installations or retrofit for Cooper, General Electric, Siemens and Howard regulators NEMA 3 rated enclosures available in the following construction materials:
Console. The Convective Series. Advanced functionality at a competitive price / rev 7c / Features
TM The Convective Series 96-988 / rev 7c / 4-3-13 EIA Compliant Console EXCEPTIONAL SUPPORT & PROTECTION Advanced functionality at a competitive price Features Fully welded 14-gauge construction (no assembly