Pushbutton Enclosures
|
|
- Brett Bailey
- 5 years ago
- Views:
Transcription
1 7 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 are designed to house oil-tight pushbuttons, switches, and pilot lights. These enclosures are primarily used in an indoor environment to protect against dust, falling dirt, dropping of non-corrosive liquid, and light splashing of water. Product Attributes ANSI-61 powder coated finish. Memory retaining oil resistant urethane gasket. Threaded inserts and captive stainless steel screws. Can be custom ordered in Type 304 or 316 stainless steel. Product Overview Extra Deep Slope Front Extra Large with Panel for 22.5 mm Pushbuttons for 30.5 mm Pushbuttons
2 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 8
3 9 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 30.5 mm Pushbutton Enclosures Application - Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil. Construction carbon steel. Continuously welded seams. Captivated cover screws thread into sealed wells. 4 - w a y p u s h b u t t o n h o l e s a c - cept all brands of oil-tight pushbuttons, switches and pilot lights. Hole diameter is 1.20 (30.5 mm). Immediate removal of cover is permitted. Oil-resistant gasket. Finish - ANSI-61 gray powder coating inside and out over phosphatized surfaces. Industry Standards - NEMA Type 12 & Type 13 UL Listed Type 12 CSA Type 12 IEC IP mm PUSHBUTTON ENCLOSURES ENCLOSURES Catalog Height Width Depth Product List No. (A) (B) (C) Code Price SCE-1PB A SCE-2PB A SCE-3PB A SCE-4PB A SCE-4SPB A SCE-5PB A SCE-6PB A SCE-6PBVL A SCE-8PB A SCE-9PB A SCE-12PB A SCE-16PB A SCE-20PB A
4 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST mm PUSHBUTTON ENCLOSURES TECHNICAL DATA
5 11 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 22.5 mm Pushbutton Enclosures Application - Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil. Construction carbon steel. Continuously welded seams. Captivated cover screws thread into sealed wells. 4 - w a y p u s h b u t t o n h o l e s a c - cept all brands of oil-tight pushbuttons, switches and pilot lights. Hole diameter is 0.87 (22.5 mm). Immediate removal of cover is permitted. Oil-resistant gasket. Finish - ANSI-61 gray powder coating inside and out over phosphatized surfaces. Industry Standards - NEMA Type 12 & Type 13 UL Listed Type 12 CSA Type 12 IEC IP mm PUSHBUTTON ENCLOSURES ENCLOSURES Catalog Height Width Depth Product List No. (A) (B) (C) Code Price SCE-1PBI A SCE-2PBI A SCE-3PBI A SCE-4PBI A SCE-4SPBI A SCE-5PBI A SCE-6PBI A SCE-6PBVLI A SCE-8PBI A SCE-9PBI A SCE-12PBI A SCE-16PBI A SCE-20PBI A
6 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST mm PUSHBUTTON ENCLOSURES TECHNICAL DATA
7 13 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Extra Deep 30.5 mm Application - Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil. Construction carbon steel. Continuously welded seams. Captivated cover screws thread into sealed wells. 4 - w a y p u s h b u t t o n h o l e s a c - cept all brands of oil-tight pushbuttons, switches and pilot lights. Hole diameter is 1.20 (30.5 mm). Immediate removal of cover is permitted. Oil-resistant gasket. Finish - ANSI-61 gray powder coating inside and out over phosphatized surfaces. Industry Standards - NEMA Type 12 & Type 13 UL Listed Type 12 CSA Type 12 IEC IP 55 EXTRA DEEP 30.5 mm PUSHBUTTON ENCLOSURES ENCLOSURES Catalog Height Width Depth Product List No. (A) (B) (C) Code Price SCE-1PBX A SCE-2PBX A SCE-3PBX A SCE-4PBX A SCE-4SPBX A SCE-6PBX A SCE-9PBX A SCE-10PBX A SCE-12PBX A SCE-16PBX A SCE-20PBX A SCE-25PBX A
8 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 14 EXTRA DEEP 30.5 mm PUSHBUTTON ENCLOSURES TECHNICAL DATA
9 15 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Extra Deep 22.5 mm Application - Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil. Construction carbon steel. Continuously welded seams. Captivated cover screws thread into sealed wells. 4 - w a y p u s h b u t t o n h o l e s a c - cept all brands of oil-tight pushbuttons, switches and pilot lights. Hole diameter is 0.87 (22.5 mm). Immediate removal of cover is permitted. Oil-resistant gasket. Finish - ANSI-61 gray powder coating inside and out over phosphatized surfaces. Industry Standards - NEMA Type 12 & Type 13 UL Listed Type 12 CSA Type 12 IEC IP 55 EXTRA DEEP 22.5 mm PUSHBUTTON ENCLOSURES ENCLOSURES Catalog Height Width Depth Product List No. (A) (B) (C) Code Price SCE-1PBXI A SCE-2PBXI A SCE-3PBXI A SCE-4PBXI A SCE-4SPBXI A SCE-6PBXI A SCE-9PBXI A SCE-10PBXI A SCE-12PBXI A SCE-16PBXI A SCE-20PBXI A SCE-25PBXI A
10 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 16 EXTRA DEEP 22.5 mm PUSHBUTTON ENCLOSURES TECHNICAL DATA
11 17 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Sloping Front 30.5 mm Application - Designed to offer protection for all standard brands of oil-tight pushbuttons, switches, and pilot lights where slanted surfaces are desired. It offers protection from dust, dirt, oil and water. Construction carbon steel. Continuously welded seams. Captivated cover screws thread into sealed wells. 4 - w a y p u s h b u t t o n h o l e s a c - cept all brands of oil-tight pushbuttons, switches and pilot lights. Hole diameter is 1.20 (30.5 mm). Immediate removal of cover is permitted. Oil-resistant gasket. Finish - ANSI-61 gray powder coating inside and out over phosphatized surfaces. Industry Standards - NEMA Type 12 & Type 13 UL Listed Type 12 CSA Type 12 IEC IP 55 SLOPING FRONT 30.5 mm PUSHBUTTON ENCLOSURES ENCLOSURES Catalog Height Width Depth Depth Product List No. (A) (B) (C) (D) Code Price SCE-1PBA A SCE-2PBA A SCE-3PBA A SCE-4PBA A SCE-4SPBA A SCE-6PBA A SCE-8PBA A SCE-9PBA A SCE-10PBA A SCE-12PBA A SCE-12SPBA A SCE-16PBA A SCE-20PBA A SCE-25PBA A SCE-30PBA A
12 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 18 SLOPING FRONT 30.5 mm PUSHBUTTON ENCLOSURES TECHNICAL DATA
13 19 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Sloping Front 22.5 mm Application - Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil. Construction carbon steel. Continuously welded seams. Captivated cover screws thread into sealed wells. 4 - w a y p u s h b u t t o n h o l e s a c - cept all brands of oil-tight pushbuttons, switches and pilot lights. Hole diameter is 0.87 (22.5 mm). Immediate removal of cover is permitted. Oil-resistant gasket. Finish - ANSI-61 gray powder coating inside and out over phosphatized surfaces. Industry Standards - NEMA Type 12 & Type 13 UL Listed Type 12 CSA Type 12 IEC IP 55 SLOPING FRONT 22.5 mm PUSHBUTTON ENCLOSURES ENCLOSURES Catalog Height Width Depth Depth Product List No. (A) (B) (C) (D) Code Price SCE-1PBAI A SCE-2PBAI A SCE-3PBAI A SCE-4PBAI A SCE-4SPBAI A SCE-6PBAI A SCE-8PBAI A SCE-9PBAI A SCE-10PBAI A SCE-12PBAI A SCE-12SPBAI A SCE-16PBAI A SCE-20PBAI A SCE-25PBAI A SCE-30PBAI A
14 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 20 SLOPING FRONT 22.5 mm PUSHBUTTON ENCLOSURES TECHNICAL DATA
15 21 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Extra Large 30.5 mm Application - Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil. Construction carbon steel. Continuously welded seams. Captivated cover screws thread into sealed wells. 4 - w a y p u s h b u t t o n h o l e s a c - cept all brands of oil-tight pushbuttons, switches and pilot lights. Hole diameter is 1.20 (30.5 mm). Oil-resistant gasket. Removable sub-panel, supported by standoffs. Ground stud on door. Cover attached with continuous hinge. Finish - ANSI-61 gray powder coating inside and out over phosphatized surfaces. Panels are powder coated white. Industry Standards - NEMA Type 12 & Type 13 UL Listed Type 12 CSA Type 12 IEC IP 55 EXTRA LARGE 30.5 mm PUSHBUTTON ENCLOSURES W/ PANEL ENCLOSURES SUB-PANEL With Panel Catalog Height Width Depth Product List Panel Panel List No. (A) (B) (C) Code Price Size (D) Size (E) Price SCE-4SPBY A Included SCE-6PBY A Included SCE-9PBY A Included SCE-12PBY A Included SCE-16PBY A Included SCE-20PBY A Included SCE-25PBY A Included SCE-30PBY A Included SCE-36PBY A Included SCE-42PBY A Included
16 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 22 EXTRA LARGE 30.5 mm PUSHBUTTON ENCLOSURES W/PANEL TECHNICAL DATA
17 23 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Extra Large 22.5 mm W/Panel Application - Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil. Construction carbon steel. Continuously welded seams. Captivated cover screws thread into sealed wells. 4 - w a y p u s h b u t t o n h o l e s a c - cept all brands of oil-tight pushbuttons, switches and pilot lights. Hole diameter is 0.87 (22.5 mm). Oil-resistant gasket. Removable sub-panel, supported by standoffs. Ground stud on door. Cover attached with continuous hinge. Finish - ANSI-61 gray powder coating inside and out over phosphatized surfaces. Panels are powder coated white. Industry Standards - NEMA Type 12 & Type 13 UL Listed Type 12 CSA Type 12 IEC IP 55 EXTRA LARGE 22.5 mm PUSHBUTTON ENCLOSURES W/PANEL ENCLOSURES SUB-PANEL Catalog Height Width Depth Product List Panel Panel List No. (A) (B) (C) Code Price Size (D) Size (E) Price SCE-4SPBY25I A Included SCE-6PBY25I A Included SCE-9PBY25I A Included SCE-12PBY25I A Included SCE-16PBY25I A Included SCE-20PBY25I A Included SCE-25PBY25I A Included SCE-30PBY25I A Included SCE-36PBY25I A Included SCE-42PBY25I A Included
18 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 24 EXTRA LARGE 22.5 mm PUSHBUTTON ENCLOSURES W/PANEL TECHNICAL DATA
19 25 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Application - Designed to offer protection for miniature oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil. Construction carbon steel. Continuously welded seams. Captivated cover screws thread into sealed wells. 4-way miniature pushbutton holes accept all brands of oil-tight pushbuttons, switches and pilot lights. Hole diameter is 0.87 (22.5 mm). Immediate removal of cover is permitted. Oil-resistant gasket. Finish - ANSI-61 gray powder coating inside and out over phosphatized surfaces. Industry Standards - NEMA Type 12 & Type 13 UL Listed Type 12 CSA Type 12 IEC IP 55 PUSHBUTTON ENCLOSURES FOR 22.5 mm PUSHBUTTONS ENCLOSURES for 22.5 mm Pushbuttons Catalog Height Width Depth Product List No. (A) (B) (C) Code Price SCE-1PBGX A SCE-2PBGX A SCE-3PBGX A SCE-4PBGX A SCE-6PBGX A SCE-9PBGX A SCE-12PBGX A SCE-16PBGX A
20 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 26 PUSHBUTTON ENCLOSURE FOR 22.5 mm PUSHBUTTONS TECHNICAL DATA
133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST
133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s are designed for control and instrumentation applications. They are a general-purpose enclosure intended for indoor use
More informationOperator System Enclosures
27 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 Operator Systems are designed to house a wide variety of equipment; panel mount, rack mount, desktop PC s, monitors,
More informationCUSTOM ENCLOSURE CUTOUTS
www.factorymation.com/enclosures ENCLOSURES 147 WWW.FACTORYMATION.COM/ENCLO- CUSTOM ENCLOSURE CUTOUTS We ll cut the holes to your specifications so the enclosure arrives... READY FOR YOUR ASSEMBLY! Enclosure
More informationUses, Certifications, and Standards Electrical Control and Instruments, Indoor/Outdoor EXTERNAL FEET, WALL standard UL 508, CSA C22.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 121264CHC Encl 12X12X6 N4 Enclosure Cooper B-Line/Cable Tray Catalog Number Manufacturer escription Weight per unit Product
More informationOperator Enclosures. Console Type 12 - AW-14 Data Sheet
Console Data Sheet Construction Console body, panel cover and door, top assembly and writing desk are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Panel cover is secured
More informationType 4 Panel Enclosures
Type 4 Lift-Off Cover ata Sheet Seamless poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use Protects against windblown dust and rain, splashing
More informationType 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
More informationFREE-STANDING ENCLOSURE ACCESSORIES FREE-STANDING ENCLOSURE ACCESSORIES. Swing-Out Panels. Panels (Full & Half Length) For Single-Door Enclosures
118 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 11 ENCLOSURE Panels (Full & Half Length) For Single-Door Enclosures Panels for single-door enclosures can
More informationC-Box Screw Cover with Knockouts NEMA 1. Commercial Enclosures Junction Boxes
C-Box Screw Cover with Knockouts Application Designed for general purpose indoor commercial use as a junction, pull or switch box. Standards UL-50 Type 1 cul Type 1 Complies with: NEMA Type 1 IEC 60529,
More informationWall-Mount Enclosures CONCEPT Wall-Mount Enclosures
Spec-00286 H763.422.2211 763.422.2600 Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures, Type 4 and 12 INDUSTRY STANDARDS Wall-mounting brackets required to maintain
More informationPhone: Fax: Web: -
empire SERIES For your largest applications, turn to the Empire Series from Allied Moulded. Fiberglass construction offers durability and strength without the excessive weight of a comparable metal enclosure.
More informationSERIES 14 SINGLE DOOR CONSOLES TECHNICAL DATA
Operator System Enclosures 1 12 SAGINAW CONTROL ENGINEERING STOCK PRICE LIST SAGINAW CONTROL ENGINEERING STOCK PRICE LIST 13 Series 1 Single Door Consoles Application - Designed for electronic controls
More informationDisconnect Enclosures
Type 12 Heavy-Duty Single & Multi-Door Data Sheet pplication Houses electrical controls and equipment Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508
More informationNEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series
NEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series Applications N412_CD Series Designed to house the following: AutomationDirect.com NEMA 1/12 Flexible shaft handle for Molded
More informationINDUSTRIAL SOLUTIONS Wallmount Enclosures...pgs IND 1-46 Wireway/Trough...pgs IND Freestanding Enclosures...pgs IND FMD Enclosures...
INDUSTRIL SOLUTIONS Wallmount s...pgs IND 1-46 Wireway/Trough...pgs IND 47-60 Freestanding s...pgs IND 61-72 FMD s...pgs IND 73-86 Operator Interface...pgs IND 87-136 Noncorrosive...pgs IND 137-193 I N
More informationIndustrial Enclosures
1414 Series JIC Enclosures - NEMA 12, 13 Clamped, Lift Off Cover Application Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal
More informationELECTRICAL ENCLOSURES AND MODULAR CABINETS EXM MANUFACTURING LTD. Since 1975
www.exmweb.com ELECTRICAL ENCLOSURES AND MODULAR CABINETS 19 EXM MANUFACTURING LTD. Since 1975 NEMA 12-13 SAFETY DISCONNECT 9500 UxD Right flange mounted disconnect multi-door enclosure The 9500 UxD oil
More informationNEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series
NEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series Applications SN4 Series Designed to house the following: Allen-Bradley Bulletin 1494V disconnect switches with flange-mounted variable
More informationWall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type 12
763.422.2600 SPEC-00245 L763.422.2211 DISCONNECT WALL-MOUNT PREFERRED-CUTOUT DISCONNECTS PREFERRED CUTOUT, DISCONNECTS, TYPE 12 Wall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type
More informationType 4 Panel Enclosures
Wall-Mount Enclosures Type 4 Premier Series with Quarter-Turn Latches Data Sheet and Catalog Number Accessories Premier panels NEMA panel adapters Depth adjustment brackets Print pockets Padlockable or
More informationStandard Product. Type 4 Free-Stand Enclosures and Accessories
763.422.2600 Spec-00294 F763.422.2211 Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand, Type 4 INDUSTRY STANDARDS
More informationStandard Product Low Profile Type 12 One-Door Disconnect Enclosures
763.422.2600 Spec-00005 M763.422.2211 Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Low-Profile, One- to Five-Door
More informationEN4DSC Disconnect Enclosures - NEMA 4 ABB Controls, Allen Bradley, Cutler Hammer, General Electric, Siemens I-T-E Max-Flex, Square D
EN4DSC Disconnect Enclosures - NEMA 4 Application Designed to house the following safety disconnect equipment: ABB Controls flange mounted variable depth operating mechanisms for disconnect switches and
More informationPreferred Cutout, Disconnect Enclosure, Type 12
763.422.2600 Spec-00245 J763.422.2211 Wall-Mount Preferred-Cutout s Preferred Cutout, s, Type 12 Wall-Mount Preferred-Cutout s Preferred Cutout, s, Type 12 Preferred Cutout, Enclosure, Type 12 INDUSTRY
More informationFree-Stand, Single or Dual Access, Type 12
Spec-00291 ree-stand Enclosures Type 12 ree-stand Enclosures ree-stand, Single or Dual Access, Type 12 INDUSTRY STANDARDS UL 508A Listed; Type 12; ile No. E61997 cul Listed per CSA C22.2 No. 94; Type 12;
More informationHeavy-Duty Enclosures Type 12 Free Standing Disconnect with Sub Panel
eavy-uty Enclosures PPLICTIONS - esigned to provide protection for electrical instruments, terminals, and controls from dust, oil, dirt and dripping liquids. CONSTRUCTION - abricated from 10 gauge carbon
More informationType 12 / 13 Enclosures
Type 12 Free-Standing Enclosures ata Sheet pplication Houses electrical controls and instruments Easy access fixed or swing panels for optional equipment ual-access construction available for back-to-back
More informationType 4X Panel Enclosures
Type 4X Lift-Off Cover ata Sheet Seamless, poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
More informationRack Mount devices shown not included Custom cabinet shown
763.422.2588 SPEC-00215 M763.422.2661 NETWORKING OUTSIDE PLANT PRODUCTS COMLINE OSP WALL-MOUNT CABINET PACKAGE AND ACCESSORIES Outside Plant Products COMLINE OSP Wall-Mount Cabinet Package and Accessories
More informationTABLE OF CONTENTS. Manufacturers of Quality Electrical Enclosures. Page: Page:
TABLE OF CONTENTS Page: Access Doors. 9 Aluminum (NEMA 4X) 48 Bussed Current Transformer Cabinets... 7 Current Transformer Cabinets 7 Dividers (Cabinet & Wireway).. 50 Flush Covers (for Screw Cover Boxes).
More informationINDUSTRIAL ELECTRICAL AND EXPLOSIONPROOF ENCLOSURE SYSTEMS
ADALET A SCOTT FETZER COMPANY INDUSTRIAL ELECTRICAL AND EXPLOSIONPROOF ENCLOSURE SYSTEMS #NCAT01 REV. D FOR CENELEC APPROVED UNITS SEE PAGE 2 14562 Pg 00-00 12/2/00 12:36 PM Page 1 Designing Our Products
More informationIMS ACCESSORIES 166 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST. End Plate. (Industrial Modular System) End Plate. Single Door Plinth Base
Modular Enclosures 166 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST End Plate Designed to provide a sealed cover for the open end of enclosures. Provides additional wiring space along the side of the
More informationSquare-Duct Wireways. Catalog 5100CT0101R06/ Class CONTENTS Description... Page. Wireway Offerings... 3
Catalog 5100CT0101R06/11 2011 Class 5100 CONTENTS Description............................................. Page Wireway Offerings............................................ 3 General Purpose NEMA Type
More informationIndustrial Enclosures
www Eclipse Junior Series Single Door Enclosures - NEMA 12, 13, 4... 2 Series 2000, Single Door Enclosures - NEMA 12, 4... 40 1414 Series JIC Enclosures, Clamped, Lift Off Cover - NEMA 12, 13... 4 1414
More informationType 4X Panel Enclosures
Wall-Mount Enclosures Type 4X Premier Series with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge Type 304 or Type 316L stainless steel (see pages 209 & 210)
More informationCLIMAGUARD Outdoor Heat Exchangers
Product Overview : CLIMAGUARD Outdoor Heat Exchangers TX23 Model TX38 Model TX52 Model 132 Product Overview : Lab- and field-tested to seal out extreme weather CLIMAGUARD Outdoor Heat Exchangers PRODUCT
More informationM-2900A Tapchanger Control Cabinet
CONTROLS M-2900A Tapchanger Control Cabinet New installations or retrofit for Cooper, General Electric, Siemens and Howard regulators NEMA 3 rated enclosures available in the following construction materials:
More informationType 4X Panel Enclosures
Ground-Mount Enclosures Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing
More informationSteel Enclosures Contents
Contents 12/001 - Type S1GK and GK/SD steel enclosures for industrial control use Type CS and GKP steel enclosures for standard starters Page 12/002 12/002 Type S3GK and GK/DW weatherproof steel enclosures
More informationDisconnect Enclosures
Wall-Mount Enclosures Type 12 Flange-Mount....................................................................... 296-298 Wall-Mount Enclosures Type 4 & 4X Premier Series 2-Point or 3-Point Locking..........................
More informationRMR Free-Standing Enclosures
Protecting your technology investment. RMR Free-Standing Enclosures provide NEMA Type 4 and 12 protection for large electronic components and controls that require sturdy mounting. ADVANTAGES Advanced
More informationAccessories. Accessories. Meter Mounting Equipment
Covers & Sealing Rings..................................................................... 119 AW & H-Base Hubs.......................................................................... 119 Flush Trim
More informationType 4X Panel Enclosures
Type 4 s Type 4 s Type 4 Single-Door Data and Illustration Sheet Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
More informationRMR Floor-Mount Enclosures
Protecting your technology investment. RMR Floor-Mount Enclosures provide NEMA Type 4 and 12 protection for large electronic components and controls that require sturdy mounting. Floor stands elevate the
More informationType 4 Panel Enclosures
Ground-Mount Enclosures Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish pplication Houses electrical controls and instruments Easy access panels or
More informationRittal North American Industrial Buyer s Guide
Rittal North American Industrial Buyer s Guide Table of Contents Enclosures Small Enclosures...10 Compact Enclosures...31 Freestanding Enclosure Systems...49 Console Systems / PC Systems / Industrial
More information*Discover our other ranges: Select your range of Spacial steel wall-mounting enclosures. Spacial S3DC. Spacial S3X page 5/4. Thalassa PLM page 6/12.
Spacial SDC Select your range of Spacial steel wall-mounting enclosures SDC You need an efficient, sealed multipurpose and aesthetic enclosure for an indoor industrial facility. Our solution: the Spacial
More informationRMR Standard Wall-Mount Enclosures
Protecting your technology investment. RMR Standard Wall-Mount Enclosures provide NEMA Type 4 and 12 protection for smaller electronic components and controls that require sturdy wall mounting. ADVANTAGES
More informationAE Wallmount FMD Enclosures AE Wallmount Carbon Steel Cabinets
FMD ENCLOSURES AE Wallmount FMD Enclosures AE Wallmount Carbon Steel Cabinets Superior in design, Rittal's AE flange mounted disconnect enclosures have fewer moving parts, which reduces assembly and installation
More informationEB SERIES INSTRUMENT ENCLOSURES
EB SERIES INSTRUMENT ENCLOSURES EB Series Instrument Enclosures 1 5 2 7 4 6 Multiple-fold 1 gutter type edge provides extra stability and protects against dirt and water when enclosure is opened. Grounding
More informationIndustrial Enclosures
1414 N4 Series JIC Enclosures - NEMA 12, 13, 4 Clamped, Lift Off Cover Industrial Enclosures Application Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical
More informationCatalog / 2016 North American Edition
Catalog 34 2015 / 2016 North American Edition without knockouts without knockouts without knockouts without knockouts PK Polycarbonate Housing Height inches (mm) Packs of 4.3 (110) 4.3 (110) 4.3 (110)
More informationACCESSORIES Electric Heater Compact Cooling Fans Floor Stand Kit PANELITE Enclosure Lights BULLETIN: A28SX
763.422.26 SPEC-177 B763.422.2211 DISCONNECT SEQUESTR PREFERRED-CUTOUT DISCONNECTS SEQUESTR EXTERNAL DISCONNECTS SEQUESTR PrefERREd-CutoUT DisconnECTS SEQUESTR ExTERnal Disconnects STAINLESS STEEL SEQUESTR
More informationIndustrial Enclosures
48J Series - NEMA 2 Large JIC Enclosures Junction Boxes Application Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments. Provides a degree of protection from falling
More informationSingle-Phase Ventilated
Single-Phase Ventilated 1 15 to 1,650 kva Applications n For general loads, including lighting, industrial and commercial applications Specifications n Meets DOE-2016 and C802 standards for energy efficiency
More informationTYPE 1 SCREW COVER WIREWAY
TYPE 1 SCREW COVER WIREWAY Construction: C & I Enclosures Type 1 Screw Cover and Hinge Cover Wireway is fabricated in accordance with U.L. specifications from code gauge steel. Wireway is furnished standard
More informationENCLOSED DISCONNECT SWITCHES
Ferraz Shawmut Enclosed isconnect es are designed to meet customer s requirements for compact and durable individual disconnecting means. Both fusible and non-fusible versions are available in a variety
More informationThree-Phase Ventilated
Three-Phase Ventilated 2 15 to 2,500 kva Applications n For general loads, including lighting, industrial and commercial applications Specifications n Meets DOE-2016 and C802 standards for energy efficiency
More informationHazardous Location Enclosures INDEX. Hazardous Location Enclosures HAZ-2
Hoffman s new ZonEX ATEX-certified enclosures can be used in Zone 1- and Zone 2-rated applications throughout the world. Our NEMA Type 9 enclosures are designed for use in Class II Division 1 and 2 locations
More informationType 4 X Panel Enclosures
Ground-Mount s Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing out frames
More informationPhone: Fax: Web: -
control series The larger ontrol Series offers standard features as well as full-panel access and all usable panel space. In addition, the standard grey cover is available with or without a full-length
More informationClimateCab Cabinets and Accessories
Product Data Sheet ClimateCab Cabinets and Accessories» Free-standing ClimateCabs include a NEMA 12 Cabinet with M6 or tapped rails, plus a 5000-, 8000-, or 12,000-BTU digitally controlled air-conditioning
More informationHOFFMAN FS66S TYPE 4X STAINLESS STEEL FREE-STAND ENCLOSURE
MGDC BS Draft 4 30-07-2014 HOFFMAN FS66S TYPE 4X STAINLESS STEEL FREE-STAND ENCLOSURE The latest Hoffman-branded enclosure from Pentair has been specially designed for housing systems with large components
More informationWeather Protective Devices
Weather Protective Devices N Industrial Specification Grade Receptacle Covers N-1, N-2 Weather Protective Devices N-3 Power-Lock Receptacles and Flanged Inlets with Weather Protective Lift Lids N-4 50
More informationGland Plate 1.4mm mild steel. -Opening: Situated at the far rear of the enclosure to make cabling onto the mounting plate easier.
14 SM SHEET STEEL ENCLOSURES ITH MOUNTING PLATE FOR ALL MOUNTING SM Delivery contents: Complete enclosure with mounting plate and fixing material, Blank flange with gasket and screws. Nylon washers for
More informationSECTION. Watertight & Dust-Tight Plugs & Connectors
SECTION Watertight & ust-tight Wetguard Product Line Section Contents LIFETIME Wetguard Plugs, Connectors & Straight Blade 2-Pole 3-Wire 2-Pole 3-Wire 3-Pole 4-Wire 3-Pole 3-Wire Non- 4-Pole 4-Wire Non-
More informationJunction Boxes & Enclosures JBES and ECES Series: 316L Stainless Steel Enclosures Increased Safety
JBES Series Medium Voltage 11 kv ECES Series Compliance Data: ATEX - IEC: ATEX IEC CE Ex e II Ex ia IIC; Ex ib IIC T6 to T4 Ex td A21 T80 C to T130 C Ex de IIC; Ex demb IIC Operating Temperatures: -50
More informationProduct Description. Junction Boxes...V1-V23 Meter and Instrument Enclosures...V24-V33
SECTION V INDEX Product Description Page Number Junction Boxes......................................V-V2 Meter and Instrument Enclosures.......................V24-V Control Centers.....................................V4-V9
More informationULTRX, Type 4X. Panel Size. Conductive
Spec-00402 EPH FX (763) 422-2600 422-21 Non-Metallic Fiberglass Industry Standards Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File
More informationNEMA 1 and NEMA 4 Metal & Plastic Enclosures
s Plastic Metal NEMA 1 and NEMA 4 Metal & Plastic s All enclosures are NEMA 1 or NEMA 4 rated and are UL Listed. Smaller enclosures have an abundance of knockouts and metal enclosures are stackable vertically
More information483 mm (19 ) Wall Mounting Cabinets IP55 (Outdoor), 600 mm width mm, 600 mm depth
483 mm (19 ) Wall Mounting Cabinets IP55 - Outdoor 1.5 mm strong steel sheet Safety class IP 55 Integrated air ventilation inlets Available with double wall structure Abstract 483 mm (19 ) Wall Mounting
More informationSuitable for use as: OSHA Lockout/Tagout disconnects Safety switches Load break switches Isolators
SafeLine Compact, heavy duty disconnect 16A 3150A 30A 3000A Fusible SafeLine enclosed disconnect are designed to meet customer requirements in terms of safety, ease of installation, space savings and operational
More informationT38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T38 1" T Form 7 Malleable Iron Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
More information1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
More informationGE 8000-Line Motor Control Centers
GE 8000-Line -1 ENCLOSURE TYPES TYPE 1 General Purpose, Indoor Intended for use indoors, primarily to prevent accidental contact of personnel with the enclosed equipment, in areas where unusual service
More informationSpec Tech Industrial Electric Control Enclosures
Control Enclosures N Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
More informationNetworking: Wall-Mount Cabinets PROTEK Wall-Mount and Double-Hinge Cabinets PROTEK Single-Door Fan and Filter Thermal Packages, UL and NEMA Type 1
PROTEK Single-Door Fan and Filter Thermal Packages, UL and NEMA Type 1 Industry Standards UL 508A Listed; Type 1; File Number E619967 cul Listed per CSA C22.2 No. 9; Type 1; File Number E61997 NEMA / EEMAC:
More information50,000 cycles minimum, resistive, inductive, tungsten filament lamp load (Fed Spec) 1.753" Depth x " Width x 2.375" Height
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 7842 40A 600V 2P Switch Pass & Seymour/Legrand Catalog Number 7842 Manufacturer Pass & Seymour/Legrand Weight per unit
More informationEQUIPMENT PROTECTION
Contractor Specifier s Guide EQUIPMENT PROTECTION WWW.PENTAIRPROTECT.COM/HOFFMAN Volume 8 Hoffman Has You Covered From utility junctions to protecting relays, contactors and wire, Hoffman has you covered.
More informationFM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationClimate Control Products
Products Filter Fans NEMA 1 Box Fan High airflow with low noise operations makes these versatile packaged fans very popular in a wide range of applications. Reversible mounting brackets allow user to push
More informationPanel Size. Conductive
Spec-00402 ULTRX, Type 4X INDUSTRY STANDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E697 cul Listed per CSA C22.2
More informationPolyline Polycarbonate Enclosures
TM Polyline Polycarbonate Enclosures Authorized Distributor: From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications WESCHLER INSTRUMENTS 800-903-9870
More informationControl Device System NEC Series ConSig 8040
16113E00 > Enclosure made of glass fibre reinforced polyester resin > Modular design > 3 sizes available > Individual units can be combined into larger units > Standard and customer-specific versions >
More informationRittal WM Selection Guide. Carbon & Stainless Steel, Disconnect, Slope Top
Rittal M Selection Guide Carbon & Stainless Steel, isconnect, Slope Top Rittal allmounts M Enclosures Efficient esign, Versatility Rittal s M enclosure sets the standard for maximum use of space and ease
More information1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight
More informationDesign Standard. Purpose: Design Standard:
Design Standard Purpose: This design standard has the purpose of creating a consistent application of motor-control centers throughout the East Side Union High School District, therefore achieving a standard
More informationAM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles Compatible with UL 1686 C1 Pin & Sleeve Devices Safer. Easier. Better. MENNEKES Non-Metallic MSR Switched and Interlocked
More information2006 Series Geared Rotary Limit Switches
SUPERIOR DESIGN AND OPERATING FEATURES Quality parts make each Geared Rotary Limit Switch highly dependable. The limit switch s ½" input shaft is connected to a worm gear. Adjustable self-lubricating nylon
More informationStandard Product. Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories
Spec-00144 Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories ULTRX WiFi, Type 4X INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cul Listed per CSA C22.2
More informationWall-Mount Enclosures
Wall-Mount Enclosures Protection When Safety Matters Most When selecting an enclosure, application can be associated with market or product. For example, is your enclosure going to be used in a petrochemical
More informationCable & Wire Management
Cable & ire Management ay-in ireway Data Sheet Cable & ire Management pplication ouses runs of control and power cable Protects against circulating dust, falling dirt and dripping noncorrosive liquids
More informationIndustrial and Commercial Duty IEC Motors
Industrial and Commercial Duty IEC Motors A Regal Brand Five product families delivering a world of opportunity LEESON Passport Series IEC Motors. There s a world of opportunity right here at home. The
More informationCompact enclosures AE
Compact enclosures AE Material: 1.4301 (AISI 304) Mounting plate: Sheet steel Cam lock: Die-cast zinc, nickel-plated Surface finish: Brushed, grain 40 Mounting plate: Zinc-plated Protection category: IP
More informationTBKS/CBKS Stainless Steel Sloping Roof Keyed Terminal Box Zones 1&2, 21&22
Hazardous Area Electrical Equipment TBKS/CBKS Stainless Steel Sloping Roof Keyed Terminal Box Zones 1&2, 21&22 Index Dimension Sheet Catalogue Information Leaflet Web Links TBKS/CBKS Information Page Ask
More informationBreakers and switches. Enclosed switches Heavy duty safety switches Fusible and non-fusible Amperes
Breakers and switches Enclosed switches Heavy duty safety switches Fusible and non-fusible 30 1200 Amperes Heavy duty fusible and non-fusible safety switches 30 1200 Amperes Features, product overview
More informationDoor available front and rear
Features - The range consists of nine cabinets, ranging from 20" x 30" to 50" x 40". - Cabinet is self-extinguishing, hot molded halogen-free fiberglass reinforced polyester. - Gray dyed in mass (RAL 7036)
More informationELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)
804 South Street 75964-726, TX Nacogdoches Phone: 96-569-794 Fax: 96-560-4685 EDS25 -Gang Start/Stop Station Cooper Crouse-Hinds Catalog Number Manufacturer Weight per unit Product Category Features Assembly/Kit
More informationXT SERIES Jockey Pump Controllers Features
XT SERIES Jockey Pump Controllers Features XT Series Jockey Pump Controllers March 2012 1-1 XT Power Controls The XT Series of Jockey Pump Controllers incorporate Eaton s XT Power Controls which are designed
More informationMaterial, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T37 1 T FM7 CND BD Appleton/Oz Gedney Catalog Number T37 Manufacturer Appleton/Oz Gedney Description FM7 Unilets Type
More information