Phone: Fax: Web: -
|
|
- Theodore Spencer
- 5 years ago
- Views:
Transcription
1 empire SERIES For your largest applications, turn to the Empire Series from Allied Moulded. Fiberglass construction offers durability and strength without the excessive weight of a comparable metal enclosure. Available in ten standard sizes, including eight wall mount cabinets from 36 x 30 x 12 to 60 x 36 x 16 and two freestanding sizes up to 72 x 49 x 25. A full range of modification services are also available on our Empire Series enclosures. Empire Series Features & Benefits Ultraguard fiberglass reinforced polyester material construction for durability Continuous stainless steel hinge Flexible, self-gripping gasket compresses over flange for tight seal Wall mount units need only three closure latches to meet NEMA Type 4X requirements Freestanding units have 3-point latching handles which meet NEMA Type 4 requirements Optional painted carbon steel back panels are fully interchangeable with other specified enclosures Suitable Applications Electrical junctions Terminal wiring Electrical and electronic controls, instruments, components Housing pushbuttons, switches or other devices Other industrial control equipment
2 Empire Series Specifications Non-corrosive Non-conductive Lightweight vs. stainless steel Temperature-resistant Fire-resistant Rated NEMA 4, 4X, cul listed Accessories Optional painted carbon steel back panels Optional thermal management products Optional print pocket Modifications We are pleased to modify any of our standard products to fit your needs. We have the lowest volume requirements on custom work in the industry, and quick turnaround time. empire series We can modify any of our Empire Series enclosures with: Custom holes and cutouts Viewing windows Molded-in color matches EMI/RFI shielding Factory-supplied silk screening Front and rear access doors Mounting strut
3 Empire Series: Wall Mount APPLICATION Designed to insulate and house electrical and electronic controls, instruments or components for indoor and outdoor applications Especially well suited for high temperature or corrosive environments Protects from dirt, dust, oil and water STANDARDS UL Types 1, 4, and 4X CSA Types 1, 4, and 4X NEMA Types 1, 4, and 4X IEC Type IP66 CONSTRUCTION Durable, corrosion resistant Ultraguard fiberglass material construction Flexible, self-gripping gasket compresses over flange for tight seal and needs only three closure twist latches to meet NEMA 4X requirements (AM6036 requires 4 latches) Heavy-duty continuous 304 stainless steel hinge Ultraguard fiberglass material has UV inhibitors which provide ideal protection from outdoor weathering ACCESSORIES Optional painted carbon steel back panels Optional thermal management products (See pages ) Optional print pocket MODIFICATIONS See page 106
4 H E B(AT TOP) M I I S S C 1.00 (25.4mm) G STAINLESS STEEL CONTINUOUS HINGE A (ATTOP) N PANEL (ORDER SEPARATELY) D J OPENING L N 2.00 (50.8mm).80 (20.3mm) Ø.625 THRU (6) K OPENING 3STAINLESS STEEL TWIST LATCHES (4 ON AM6036 MODELS) F.38 (9.7mm) FRONT VIEW WITH COVER NOM..19 (4.8mm) WALL THICKNESS FRONT VIEW WITH COVER REMOVED SIDE VIEW Part No. A B C D E F G H I J K L M AM363012L mm 768mm 258mm 1,029mm 791mm 306mm 988mm 610mm 305mm 851mm 699mm 794mm 641mm AM363016L mm 763mm 360mm 1,029mm 791mm 407mm 988mm 610mm 305mm 851mm 699mm 794mm 641mm AM363612L mm 921mm 258mm 1,029mm 944mm 306mm 988mm 762mm 381mm 851mm 851mm 794mm 794mm AM363616L mm 915mm 360mm 1,029mm 944mm 407mm 988mm 762mm 381mm 851mm 851mm 794mm 794mm AM483612L ,226mm 921mm 258mm 1,334mm 944mm 306mm 1,293mm 762mm 381mm 1,156mm 851mm 1,099mm 794mm AM483616L ,220mm 915mm 360mm 1,334mm 944mm 407mm 1,293mm 762mm 381mm 1,156mm 851mm 1,099mm 794mm AM603612L ,530mm 921mm 258mm 1,638mm 944mm 306mm 1,598mm 762mm 381mm 1,461mm 851mm 1,403mm 794mm AM603616L ,525mm 915mm 360mm 1,638mm 944mm 407mm 1,598mm 762mm 381mm 1,461mm 851mm 1,403mm 794mm Part No. N S # PANEL MOUNT STUDS # OF TWIST LATCHES AM363012L mm 321mm AM363016L mm 321mm AM363612L mm 397mm AM363616L mm 397mm AM483612L mm 397mm AM483616L mm 397mm AM603612L mm 397mm AM603616L mm 397mm Optional Carbon Steel Back Panels Part No. Height Width P3630CS mm 686mm P3636CS mm 833mm P4836CS mm 833mm P6036CS mm 833mm EMPiRE ser ERiEs
5 Empire Series: Free Standing Single Door APPLICATION Designed to insulate and house electrical and electronic controls, instruments or components for indoor and outdoor applications Especially well suited for high temperature or corrosive environments Protects from dirt, dust, oil and water STANDARDS UL Types 1, 4, and 4X CSA Types 1, 4, and 4X NEMA Types 1, 4, and 4X IEC Type IP66 CONSTRUCTION Durable, corrosion resistant Ultraguard fiberglass material construction Soft, self-gripping gasket compresses over flange for tight seal and has one 3 point latching handle with padlocking provision Heavy-duty continuous 304 stainless steel hinge Ultraguard fiberglass material has UV inhibitors which provide ideal protection from outdoor weathering Heavy duty lifting eyes Molded-in drip shield ACCESSORIES Optional painted carbon steel back panels Optional thermal management products (See pages ) Optional print pocket MODIFICATIONS See page 106
6 H E STAINLESS STEEL EYEBOLT M (3) STAINLESS STEEL CONTINUOUS HINGE N L D J OPENING Q 3 POINT STAINLESS STEEL LATCH HANDLE (PADLOCK PROVISIONED) N 5.50 (139.7mm) 7.13 (181.1mm) R FRONT VIEW WITH DOOR K OPENING FRONT VIEW WITH DOOR REMOVED 1.00 (25.4mm) F 0.19 (4.8mm) WALL THICKNESS P (584.7mm) 1.54 (39.1mm) EMPiRE ser ERiEs Part No. D E F H J K L M N P Q R # PANEL MOUNT STUDS AM722525FS mm 635mm 622mm 552mm 1597mm 524mm 1403mm 489mm 702mm 311mm 1676mm 584mm Optional Carbon Steel Back Panel Part No. Height Width P7225CS mm 533mm
7 Empire Series: Free Standing Double Door APPLICATION Designed to insulate and house electrical and electronic controls, instruments or components for indoor and outdoor applications Especially well suited for high temperature or corrosive environments Protects from dirt, dust, oil and water STANDARDS UL Types 1, 4, and 4X CSA Types 1, 4, and 4X NEMA Types 1, 4, and 4X IEC Type IP66 CONSTRUCTION Durable, corrosion resistant Ultraguard fiberglass material construction Flexible, self-gripping gasket compresses over flange for tight seal and has two 3 point latching handles with padlocking provision Heavy-duty continuous 304 stainless steel hinge Ultraguard Fiberglass material has UV inhibitors which provide ideal protection from outdoor weathering Heavy duty lifting eyes Molded-in drip shield Fiberglass mounting strut installed on side ACCESSORIES Optional painted carbon steel back panels Optional thermal management products (See pages ) Optional print pocket MODIFICATIONS Phone: See page Fax: Web: info@clrwtr.com
8 E STAINLESS STEEL EYEBOLT H M (6) STAINLESS STEEL CONTINUOUS HINGE Q (1,734mm) N L J 3POINT STAINLESS STEEL LATCH HANDLE (PADLOCK PROVISIONED) D (994mm) N 5.50 (127mm) (254mm) 7.00 (177.8mm) R K 3.38 (85.9mm) CENTER POST FRONT VIEW WITH DOORS FRONT VIEW WITH DOORS REMOVED 1.00 (25.4mm) P 0.19 (4.8mm) WALL THICKNESS F (584.7mm) 1.63 (41.4mm) EMPiRE ser ERiEs Part No. D E F H J K L M N P Q R # PANEL MOUNT STUDS AM724925FSDD mm 1245mm 622mm 1149mm 1597mm 524mm 1403mm 489mm 702mm 127mm 1676mm 584mm Optional Carbon Steel Back Panel Part No. Height Width P7249CS mm 533mm
Phone: Fax: Web: -
control series The larger ontrol Series offers standard features as well as full-panel access and all usable panel space. In addition, the standard grey cover is available with or without a full-length
More informationAM Series Small Junction Boxes Lift-Off Screw Cover...4
Table of Contents AM Series Small Junction Boxes Lift-Off Screw Cover...4 AM Series Pushbutton Enclosures Inline Lift-Off Screw Cover...4 Multi-Hole Lift-Off Screw Cover...5 Multi-Hole Hinged Screw Cover...5
More informationStandard Product. Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories
Spec-00144 Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories ULTRX WiFi, Type 4X INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cul Listed per CSA C22.2
More informationThe TeleControl Series Technical Drawings
The TeleControl Series Technical Drawings TeleControl TeleControl Enclosures Dimensions SIZE ID NUMBER OVERALL H X W X D INSIDE A X B X C E X F J K L M N HOLE DIA. SHIPPING WEIGHT PANEL NUMBER J1407TC
More informationType 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
More informationPanel Size. Conductive
Spec-00402 ULTRX, Type 4X INDUSTRY STANDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E697 cul Listed per CSA C22.2
More informationThe DiamondShield Series DS
The DS The was developed for design flexibility and pleasing aesthetics. Applications include high-end electronics, harsh corrosive environments, and industrial applications both indoors and out. Unique
More information14x12x7 Inch 48 VDC (PoE) Power-Over-Ethernet Powered, Weatherproof & Insulated with Heating System - Model: NB H0N
14x12x7 Inch 48 VDC (PoE) Power-Over-Ethernet Powered, Weatherproof & Insulated with Heating System - Model: NB141207-4H0N Applications and Features Features: Molded Fiberglass Reinforced Polyester (FRP)
More informationSpec Tech Industrial Electric Control Enclosures
Control Enclosures N Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
More informationFREE-STANDING ENCLOSURE ACCESSORIES FREE-STANDING ENCLOSURE ACCESSORIES. Swing-Out Panels. Panels (Full & Half Length) For Single-Door Enclosures
118 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 11 ENCLOSURE Panels (Full & Half Length) For Single-Door Enclosures Panels for single-door enclosures can
More informationULTRX, Type 4X. Panel Size. Conductive
Spec-00402 EPH FX (763) 422-2600 422-21 Non-Metallic Fiberglass Industry Standards Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File
More informationEnclosure Specific Accessories - Field Replacement of Standard Latches
Enclosure Specific Accessories - Field Replacement of Standard Latches J Series - JLL150KIT NLL150WTKIT SSLKIT Control / N Series NLL150KIT Field Replacement of Standard Latches FIELD REPLACEMENT OF USED
More informationPOLYLINE Polycarbonate Enclosures. From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications
POLYLINE Polycarbonate Enclosures From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications Table of ontents lick on the information located within
More informationControl Enclosures. Type 1, 3, 3R, 4X, 12 as designated. Type 1, 3, 3R, 4X, 12 as designated WT, HWT, FHLWT
Control Enclosures Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
More informationPolyline Polycarbonate Enclosures
TM Polyline Polycarbonate Enclosures Authorized Distributor: From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications WESCHLER INSTRUMENTS 800-903-9870
More informationStandard Product. Type 4 Free-Stand Enclosures and Accessories
763.422.2600 Spec-00294 F763.422.2211 Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand, Type 4 INDUSTRY STANDARDS
More informationNetworking: Wall-Mount Cabinets PROTEK Wall-Mount and Double-Hinge Cabinets PROTEK Single-Door Fan and Filter Thermal Packages, UL and NEMA Type 1
PROTEK Single-Door Fan and Filter Thermal Packages, UL and NEMA Type 1 Industry Standards UL 508A Listed; Type 1; File Number E619967 cul Listed per CSA C22.2 No. 9; Type 1; File Number E61997 NEMA / EEMAC:
More informationWall-Mount Enclosures CONCEPT Wall-Mount Enclosures
Spec-00286 H763.422.2211 763.422.2600 Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures, Type 4 and 12 INDUSTRY STANDARDS Wall-mounting brackets required to maintain
More information133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST
133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s are designed for control and instrumentation applications. They are a general-purpose enclosure intended for indoor use
More informationJUNCTION BOXES AND SUNSHADES
JUNCTION BOXES AND SUNSHADES Description The SITES S.r.l. enclosure system winterizes process instruments and protects them from corrosion and mechanical abuse. A full range of enclosures sizes are available
More informationType 4X Panel Enclosures
Wall-Mount Enclosures Type 4X Premier Series with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge Type 304 or Type 316L stainless steel (see pages 209 & 210)
More informationRMR Free-Standing Enclosures
Protecting your technology investment. RMR Free-Standing Enclosures provide NEMA Type 4 and 12 protection for large electronic components and controls that require sturdy mounting. ADVANTAGES Advanced
More informationRMR Floor-Mount Enclosures
Protecting your technology investment. RMR Floor-Mount Enclosures provide NEMA Type 4 and 12 protection for large electronic components and controls that require sturdy mounting. Floor stands elevate the
More informationHeavy-Duty Enclosures Type 12 Free Standing Disconnect with Sub Panel
eavy-uty Enclosures PPLICTIONS - esigned to provide protection for electrical instruments, terminals, and controls from dust, oil, dirt and dripping liquids. CONSTRUCTION - abricated from 10 gauge carbon
More informationACCESSORIES Electric Heater Compact Cooling Fans Floor Stand Kit PANELITE Enclosure Lights BULLETIN: A28SX
763.422.26 SPEC-177 B763.422.2211 DISCONNECT SEQUESTR PREFERRED-CUTOUT DISCONNECTS SEQUESTR EXTERNAL DISCONNECTS SEQUESTR PrefERREd-CutoUT DisconnECTS SEQUESTR ExTERnal Disconnects STAINLESS STEEL SEQUESTR
More informationPushbutton Enclosures
7 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 are designed to house oil-tight pushbuttons, switches, and pilot lights. These enclosures are primarily used in
More informationStandard Product Low Profile Type 12 One-Door Disconnect Enclosures
763.422.2600 Spec-00005 M763.422.2211 Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Low-Profile, One- to Five-Door
More informationIP65/IP66 ABS/Polycarbonate Screw Lid Boxes
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes p Versatile, lightweight & durable p Choice of materials: polycarbonate for rugged applications or ABS as an economic alternative p IP protection for outdoor
More informationC-Box Screw Cover with Knockouts NEMA 1. Commercial Enclosures Junction Boxes
C-Box Screw Cover with Knockouts Application Designed for general purpose indoor commercial use as a junction, pull or switch box. Standards UL-50 Type 1 cul Type 1 Complies with: NEMA Type 1 IEC 60529,
More informationStandards IEC IEC 529 Rated IP66-9 EN EN Mounting frame: removable predrilled reinforced DIN-rails
Features - The range is available in seven sizes, ranging from 12" x 8" to 40" x 32". - The cabinets are made of beige (RL 7032) hot molded fiberglass reinforced polyester, dyed in mass. The enclosure
More informationOperator System Enclosures
27 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 Operator Systems are designed to house a wide variety of equipment; panel mount, rack mount, desktop PC s, monitors,
More informationIndustrial Enclosures
48J Series - NEMA 2 Large JIC Enclosures Junction Boxes Application Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments. Provides a degree of protection from falling
More informationFiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006
ROSE+BOPLA ENCLOSURES A PHOENIX MECANO COMPANY Fiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006 Dimensional Drawings All sizes are available with an optional clear viewing lid.
More informationSERIES 14 SINGLE DOOR CONSOLES TECHNICAL DATA
Operator System Enclosures 1 12 SAGINAW CONTROL ENGINEERING STOCK PRICE LIST SAGINAW CONTROL ENGINEERING STOCK PRICE LIST 13 Series 1 Single Door Consoles Application - Designed for electronic controls
More informationINDUSTRIAL SOLUTIONS Wallmount Enclosures...pgs IND 1-46 Wireway/Trough...pgs IND Freestanding Enclosures...pgs IND FMD Enclosures...
INDUSTRIL SOLUTIONS Wallmount s...pgs IND 1-46 Wireway/Trough...pgs IND 47-60 Freestanding s...pgs IND 61-72 FMD s...pgs IND 73-86 Operator Interface...pgs IND 87-136 Noncorrosive...pgs IND 137-193 I N
More informationIndustrial Enclosures
1414 N4 Series JIC Enclosures - NEMA 12, 13, 4 Clamped, Lift Off Cover Industrial Enclosures Application Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical
More informationINDUSTRIAL ELECTRICAL AND EXPLOSIONPROOF ENCLOSURE SYSTEMS
ADALET A SCOTT FETZER COMPANY INDUSTRIAL ELECTRICAL AND EXPLOSIONPROOF ENCLOSURE SYSTEMS #NCAT01 REV. D FOR CENELEC APPROVED UNITS SEE PAGE 2 14562 Pg 00-00 12/2/00 12:36 PM Page 1 Designing Our Products
More informationCarlon. Enclosures. Himeline * Enclosures. HS, HP and HLA/HLS Series Features. Applications. Standards
Himeline * HS, HP and HLA/HLS Series Features High-impact strength High dielectric strength Suitable for indoor and outdoor use Fully gasketed Lightweight Applications Instrument case Junction and terminal
More informationEQUIPMENT PROTECTION
Contractor Specifier s Guide EQUIPMENT PROTECTION WWW.PENTAIRPROTECT.COM/HOFFMAN Volume 8 Hoffman Has You Covered From utility junctions to protecting relays, contactors and wire, Hoffman has you covered.
More informationType 4X Panel Enclosures
Type 4 s Type 4 s Type 4 Single-Door Data and Illustration Sheet Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
More informationType 4 Panel Enclosures
Wall-Mount Enclosures Type 4 Premier Series with Quarter-Turn Latches Data Sheet and Catalog Number Accessories Premier panels NEMA panel adapters Depth adjustment brackets Print pockets Padlockable or
More informationSwitch rated plugs and receptacles with nema 4X protection
DSn Features and Ratings p. 24 DSN20 p. 25 DSN30 p. 27 DSN60 p. 29 Spare parts p. 31 Dimensions p. 33 23 Switch rated plugs and receptacles with nema 4X protection DSN Series products are switch and hp
More informationWeather Protective Devices
Weather Protective Devices N Industrial Specification Grade Receptacle Covers N-1, N-2 Weather Protective Devices N-3 Power-Lock Receptacles and Flanged Inlets with Weather Protective Lift Lids N-4 50
More informationSquare-Duct Wireways. Catalog 5100CT0101R06/ Class CONTENTS Description... Page. Wireway Offerings... 3
Catalog 5100CT0101R06/11 2011 Class 5100 CONTENTS Description............................................. Page Wireway Offerings............................................ 3 General Purpose NEMA Type
More informationUses, Certifications, and Standards Electrical Control and Instruments, Indoor/Outdoor EXTERNAL FEET, WALL standard UL 508, CSA C22.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 121264CHC Encl 12X12X6 N4 Enclosure Cooper B-Line/Cable Tray Catalog Number Manufacturer escription Weight per unit Product
More informationDoor available front and rear
Features - The range consists of nine cabinets, ranging from 20" x 30" to 50" x 40". - Cabinet is self-extinguishing, hot molded halogen-free fiberglass reinforced polyester. - Gray dyed in mass (RAL 7036)
More informationWall-Mount Enclosures
Wall-Mount Enclosures Protection When Safety Matters Most When selecting an enclosure, application can be associated with market or product. For example, is your enclosure going to be used in a petrochemical
More informationAM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles Compatible with UL 1686 C1 Pin & Sleeve Devices Safer. Easier. Better. MENNEKES Non-Metallic MSR Switched and Interlocked
More information[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]
[ SOLUTIONS FOR AUTOMATION & ONTROL DEVIES: ] INDUSTRY STANDARDS Solid hinged cover models. Mounting brackets required to meet UL/SA external mounting requirements. FEATURES remove and -install hinge pins
More informationType 4X Panel Enclosures
Type 4X Lift-Off Cover ata Sheet Seamless, poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
More informationAE Wallmount FMD Enclosures AE Wallmount Carbon Steel Cabinets
FMD ENCLOSURES AE Wallmount FMD Enclosures AE Wallmount Carbon Steel Cabinets Superior in design, Rittal's AE flange mounted disconnect enclosures have fewer moving parts, which reduces assembly and installation
More informationCHAPTER4 Wall-Mount Cabinets
: CHAPTER Wall-Mount Cabinets Protect your electronics investment with space-saving solutions from Pentair Technical Products Hoffman brand. In schools, factories, retail outlets and government centers
More informationHigh-Performance Industrial Emergency LED Lighting LHP & LHPR SERIES
High-Performance Industrial Emergency LED Lighting LHP & LHPR SERIES The LHP Series offers many advantages in an industrial environment LHP SERIES Illuminates wide, open areas such as warehouses, manufacturing
More informationINTRODUCTION PENTAIR HOFFMAN 1
INTRODUCTION Purpose Understand electrical enclosure materials Objectives Learn about available electrical enclosure construction materials Understand the factors used to select the proper enclosure material
More informationCommercial Boxes and Enclosures COM-24 COM-66
and Count on Hoffman to provide you with off-the-shelf innovation features to save you time and money. Perforated panels make component layout and mounting fast, easy, and flexible. Integral wood panels
More informationARIA Series configuration options and specifications
Vynckier Enclosure Systems 271 McCarty St., Houston, Texas 77029 Phone: (713) 374-7850 Toll Free: (888) 837-1114 Fax: (800) 444-1261 www.vynckier.com ARIA Series configuration options and specifications
More informationDisconnect Enclosures
Type 12 Heavy-Duty Single & Multi-Door Data Sheet pplication Houses electrical controls and equipment Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508
More informationNEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series
NEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series Applications N412_CD Series Designed to house the following: AutomationDirect.com NEMA 1/12 Flexible shaft handle for Molded
More informationDisconnect Enclosures
Wall-Mount Enclosures Type 12 Flange-Mount....................................................................... 296-298 Wall-Mount Enclosures Type 4 & 4X Premier Series 2-Point or 3-Point Locking..........................
More informationPreferred Cutout, Disconnect Enclosure, Type 12
763.422.2600 Spec-00245 J763.422.2211 Wall-Mount Preferred-Cutout s Preferred Cutout, s, Type 12 Wall-Mount Preferred-Cutout s Preferred Cutout, s, Type 12 Preferred Cutout, Enclosure, Type 12 INDUSTRY
More informationType 4 Panel Enclosures
Type 4 Lift-Off Cover ata Sheet Seamless poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use Protects against windblown dust and rain, splashing
More informationBreakers and switches. Enclosed switches Heavy duty safety switches Fusible and non-fusible Amperes
Breakers and switches Enclosed switches Heavy duty safety switches Fusible and non-fusible 30 1200 Amperes Heavy duty fusible and non-fusible safety switches 30 1200 Amperes Features, product overview
More informationApplications. Illustrated Features
Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing
More informationThe Pushbutton Series
The The includes two separate enclosure designs, an in-line style and a multi-hole style configuration. oth are designed from fiberglass reinforced polyester and feature a continuous polyurethane gasket
More informationIndustrial Enclosures
www Eclipse Junior Series Single Door Enclosures - NEMA 12, 13, 4... 2 Series 2000, Single Door Enclosures - NEMA 12, 4... 40 1414 Series JIC Enclosures, Clamped, Lift Off Cover - NEMA 12, 13... 4 1414
More informationWall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type 12
763.422.2600 SPEC-00245 L763.422.2211 DISCONNECT WALL-MOUNT PREFERRED-CUTOUT DISCONNECTS PREFERRED CUTOUT, DISCONNECTS, TYPE 12 Wall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type
More informationModular Enclosure Solutions Specifier s Guide
Modular Enclosure Solutions Specifier s Guide EQUIPMENT PROTECTION WWW.PENTAIRPROTECT.COM/HOFFMAN Volume 1 The Next Generation Modular Enclosure Stronger. Faster. Easier. You ve already spent tens of thousands
More informationSealtight LED Luminaire
CATALOG NO. TYPE NO. JOB NAME ORDERING INFORMATION Catalog Number: Example: SLT434KDRB SLT FAMILY SLT - Sealtight Luminaire ACCESSORIES 23-2300 nominal 35-3500 nominal 43-4300 nominal 51-5100 nominal COLOR
More informationGL66 SERIES STAINLESS STEEL HINGED COVER WALL-MOUNT ENCLOSURES
GL66 SERIES STAINLESS STEEL INGED COVER ALL-MOUNT ENCLOSURES Aesthetic styling and an attractive, stroked finish make GL66STE enclosures an excellent choice when style and functionality are important.
More informationEN4DSC Disconnect Enclosures - NEMA 4 ABB Controls, Allen Bradley, Cutler Hammer, General Electric, Siemens I-T-E Max-Flex, Square D
EN4DSC Disconnect Enclosures - NEMA 4 Application Designed to house the following safety disconnect equipment: ABB Controls flange mounted variable depth operating mechanisms for disconnect switches and
More informationELECTRICAL ENCLOSURES AND MODULAR CABINETS EXM MANUFACTURING LTD. Since 1975
www.exmweb.com ELECTRICAL ENCLOSURES AND MODULAR CABINETS 19 EXM MANUFACTURING LTD. Since 1975 NEMA 12-13 SAFETY DISCONNECT 9500 UxD Right flange mounted disconnect multi-door enclosure The 9500 UxD oil
More informationPH (763) FX (763) hoffmanonline.com
PH (763) 422-2211 FX (763) 422-2600 : 1 ContractorType 1 Chapter Contents Screw-Cover Type 1 Pull Boxes and Accessories Screw-Cover, Type 1............................................... 3 Type 1 Pull
More informationNMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and Damp Locations
NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and s NEMA 4X UL 1598 Wet & s CUL IP65 NSF Enclosure N M F 2 339 NMF2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent
More informationDSN. Switch-rated plug and receptacle with Type 4X protection
DSN Features and Ratings p. 24 DSN20 p. 25 DSN30 p. 27 DSN60 p. 29 DSN150 p. 31 Spare parts p. 33 Dimensions p. 35 Switch-rated plug and receptacle with Type 4X protection DSN Series products are switch
More informationSECTION. Watertight & Dust-Tight Plugs & Connectors
SECTION Watertight & ust-tight Wetguard Product Line Section Contents LIFETIME Wetguard Plugs, Connectors & Straight Blade 2-Pole 3-Wire 2-Pole 3-Wire 3-Pole 4-Wire 3-Pole 3-Wire Non- 4-Pole 4-Wire Non-
More informationSPECIFICATIONS EFFLUENT/SUMP DUPLEX SYSTEM ZOELLER SUBMERSIBLE DEWATERING OR EFFLUENT PUMPS
Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 Louisville, KY 40256-0347 SHIP TO: 3649
More informationIntroduction. Features. Intelligent Technologies Motor Control Center Structures
Intelligent Technologies Technical Data New Information Description Page Intelligent Technologies General............................................. 2 s.......................................................
More informationLimit switches. Metal. Limit Switches Metal casing, 30mm, 40mm & 60mm
Limit Switches casing, 3mm, 4mm & 6mm Description are made of aluminum alloy and have a degree of protection of IP 66 and UL type 4X. The casings come in 3 dimensions: LS3M, 3mm width. LS4M, 4mm width.
More information2018 Consultant s Handbook Division 26 Electrical 2413 Switchboards
1 General 1.1 Switchboards shall be U.L. listed and labeled. 1.2 Each switchboard shall have its own main disconnecting means unless it is located in the same room as its source of origin. In most cases
More informationBenefits. Safety. Durability. Performance. Russellstoll. Heavy Industrial/ Marine
eavy Industrial/ Marine Benefits builds a variety of benefits into one plug, receptacle and interlock system for your application. Safety Waterproof construction: standard neoprene O ringed interior components
More informationRobust construction and high amperage capabilities
DR Features and Ratings p. 130 DR30 p. 131 DR50 p. 133 DR100 p. 135 DR150 p. 137 DR 250 p. 139 Spare parts p. 141 Dimensions p. 143 Robust construction and high amperage capabilities 129 DR series plugs
More informationHinges Gasketing Handles Stainless Steel Toggle Latches Compression Latches Quarter Turns Rod Controls Locking Systems
Rod Controls Locking Systems Hinges Gasketing Handles Stainless Steel Toggle Latches Compression Latches Quarter Turns Locking Systems Hinges Gasketing Handles Stainless Steel Toggle Latches Compression
More information75 KVA Transformer Power Distribution - 480V to 120/208V - Nema 3R V and 8 120V Outlets
75 KVA Transformer Power Distribution - 480V to 120/208V - Nema 3R - 6 208V and 8 120V Outlets Part #: MPD-480-200MB-75K-6X208-8X120 MADE IN THE USA This Larson Electronics 75KVA Power Distribution Substation
More informationFree-Stand, Single or Dual Access, Type 12
Spec-00291 ree-stand Enclosures Type 12 ree-stand Enclosures ree-stand, Single or Dual Access, Type 12 INDUSTRY STANDARDS UL 508A Listed; Type 12; ile No. E61997 cul Listed per CSA C22.2 No. 94; Type 12;
More informationRack Mount devices shown not included Custom cabinet shown
763.422.2588 SPEC-00215 M763.422.2661 NETWORKING OUTSIDE PLANT PRODUCTS COMLINE OSP WALL-MOUNT CABINET PACKAGE AND ACCESSORIES Outside Plant Products COMLINE OSP Wall-Mount Cabinet Package and Accessories
More informationRMR Standard Wall-Mount Enclosures
Protecting your technology investment. RMR Standard Wall-Mount Enclosures provide NEMA Type 4 and 12 protection for smaller electronic components and controls that require sturdy wall mounting. ADVANTAGES
More informationGlass Reinforced Polyester Enclosures
42 The GRP range comprises 16 sizes of enclosure manufactured in glass reinforced polyester (GRP). This material is highly resistant to contamination from oils, fats, aliphatic and aromatic carbohydrates,
More informationSolar Combiner Solutions
Combiner Solutions Built to UL1741 standards NEMA 4X (fiberglass and stainless steel) NEMA 3R (painted steel) Made in America Combiners and disconnects that offer superior resistance and durability from
More informationPower Distribution - 30KVA - 480V to 120V & 220V - Ten 120 Volt GFCI Outlets - Two 220 Volt Outlet
Power Distribution - 30KVA - 480V to 120V & 220V - Ten 120 Volt GFCI Outlets - Two 220 Volt Outlet Part #: MGPD-2X480-30A-30KVA-10X120-2X220 MADE IN THE USA This Larson Electronics 30KVA Power Distribution
More informationENCLOSED DISCONNECT SWITCHES
Ferraz Shawmut Enclosed isconnect es are designed to meet customer s requirements for compact and durable individual disconnecting means. Both fusible and non-fusible versions are available in a variety
More informationSolar Combiner Solutions
Solar Combiner Solutions Providing combiners and disconnects that offer superior resistance and durability from harsh weather and abusive solar environments Solar Technology Leading the way in Solar Technology
More informationSwitch rated plugs and receptacles
DS Features and Ratings p. 36 DS20 p. 37 DS30 p. 39 DS60 p. 41 DS100C p. 43 DS100 p. 45 DS200 p. 47 Spare parts p. 49 Dimensions p. 51 35 Switch rated plugs and receptacles DS Series Decontactors provide
More informationBlind and Polycarbonate Cases FQ Series: stainless steel cases with single door
Series Smart 22 Series Smart Blind and Polycarbonate Cases FQ Series: stainless steel cases with single door The Smart series is the proposal for boxes with and witout inner door for small and medium sized
More informationInstrument Enclosure Assemblies
Instrument Enclosure Assemblies Standard instrument enclosure Instrument enclosures offer a simple solution for the customer who doesn t have the time to install Signet meters into panels. Whether it s
More informationLocking System. White Paper
Locking System White Paper Contents Introduction...4 Easy Integration...4 Benefits...4 Floor standing Mild steel...5 Floor standing Stainless steel... 10 Floor standing Aluminum... 15 Wall mounted Mild
More informationARIA Series configuration options and specifications
Series configuration options and specifications AN Opaque Cover Enclosures (AN) 80 Bonded Window Enclosures (ANB) 82 * Prefix AN: Flat opaque cover ANB: Flat cover with bonded window ANG: Flat cover with
More informationCUSTOM ENCLOSURE CUTOUTS
www.factorymation.com/enclosures ENCLOSURES 147 WWW.FACTORYMATION.COM/ENCLO- CUSTOM ENCLOSURE CUTOUTS We ll cut the holes to your specifications so the enclosure arrives... READY FOR YOUR ASSEMBLY! Enclosure
More informationACCESSORIES ACCESSORIES 2150 DRAWING POCKET (A4) 2152 DRAWING POCKET (A5) 2220 CIRCULAR INSPECTION WINDOW 2215 COUNTER SCREEN
ACCESSORIES GROUP NAME 2150 DRAWING POCKET (A4) 2152 DRAWING POCKET (A5) 2220 CIRCULAR INSPECTION WINDOW 2216 COUNTER SCREEN 2215 COUNTER SCREEN 24XX 240X EYEBOLT CAGE NUT 340.00.135 TOGGLE LATCH 340.00.133
More informationNEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series
NEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series Applications SN4 Series Designed to house the following: Allen-Bradley Bulletin 1494V disconnect switches with flange-mounted variable
More informationShock/Vibration Control Switches
Shock/Vibration Control Switches Models: VS2, VS2C, VS2EX, VS2EXR, VS2EXRB and VS94 ` Installation Instructions 00-02-0185 2013-02-01 Section 20 Please read the following information before installing.
More information