The Pushbutton Series
|
|
- Kristopher Chapman
- 5 years ago
- Views:
Transcription
1 The The includes two separate enclosure designs, an in-line style and a multi-hole style configuration. oth are designed from fiberglass reinforced polyester and feature a continuous polyurethane gasket that provides a complete environmental seal. full metal grounding strap is furnished with each configuration for ease of bonding. Designed as a true pushbutton station, the in-line enclosure does not offer a provision for panel mounting. If panel mounting is required, the preferred enclosure would be the multi-hole pushbutton. Unobstructed side-walls, captive stainless steel cover screws and a full range of sizes makes this a most versatile offering. This unique in-line enclosures will house pushbuttons, switches and pilot lights in both 30mm and 22mm configurations. The alternate configuration is the multi-hole design which has a integral flange mount and back panel capabilities. This series is ideal for high density pushbutton mounting and can accommodate up to nine operators on a single cover. This multi-hole design is compatible with 30mm configuration components. series enclosures are designed for general electrical and electronic applications and any application that has associated environmental concerns. Custom hole configurations are available upon request. Please consult factory. ttributes lush cover design Memory retaining continuous polyurethane gasket Captive stainless steel cover screws ull metal grounding strap Notched key hole design Chemically resistant fiberglass reinforced polyester Submersible, non corrosive, environmental design vailable in 30mm and 22mm configurations Industry Standards UL/cUL 50 ile E64358 Type 1, 3, 4X, 6P, 12 NEM 250 Type 1, 3, 4X, 6P, 12 CS Std 22.2 ile LR Type 1, 3, 4X, 6P, 12 Temperature Range (-76 to +274 ) (-60 C to +134 C) lammability Rating UL94-5V Self extinguishing Non-halogenated, non-flame propagating Chemical Resistance ull chemical resistance charts listed in appendix NP No. 101 lame Spread Class (1) Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San rancisco, C Main Office: (650) Outside Local rea: (800)
2 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San rancisco, C Main Office: (650) Outside Local rea: (800)
3 Push utton Technical Specifications - configuration - 4 cover screws, lift off cover 30mm Construction Material Gasket Cover screws Stainless Steel Hardware Enclosure mounting Soft Edge Design Hot compression molded fiberglass reinforced polyester (thermoset) Poured polyurethane seamless gasket provides watertight, dust-tight environmental seal Recessed captive stainless steel screws 300 stainless used on all external hardware Mounting wells located under the cover, outside gasket area Rounded edges, minimal protrusions or exposed pocket areas for assembly of dust and debris NOTES: Industry Standards UL/cUL 50 ile E64358 Type 1, 3R, 4X, 6P, 12 NEM 250 Type 1, 3R, 4X, 6P, 12 CS Std C22.2 ile LR Type 1, 3R, 4X, 6P, 12 Temperature Range (-76 to +274 ) (-60 C to +134 C) lammability Rating UL94-5V Self Extinguishing Non-flame propagating Chemical Resistance ull chemical resistance charts listed in appendix NP No. 101 lame Spread Class (1) ccessories Mounting eet Mounting eet pg. 157 Modifications Custom Colors pg Custom Painting pg Silk Screening pg Custom Cutouts/Holes pg Stahlin Enclosures 500 Maple Street, elding, MI Phone: ax: Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San rancisco, C Main Office: (650) Outside Local rea: (800)
4 30mm In-Line Configuration Technical Drawings W J O 2.25 (57) C H I M 2.25 (57).190 (5) SECTION - L (31).672 (17) D K N SECTION (5) RONT VIEW Enclosures - 30mm In-Line Configuration Dimensions SIZE ID NUMER OVERLL H X W X D INSIDE X X C I J K L M N O SHIPPING WEIGHT 1P 6.63 x 3.81 x x 3.19 x lbs. (168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (84) 2P 6.63 x 3.81 x x 3.19 x lbs. (168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (56) 3P 8.88 x 3.81 x x 3.19 x lbs. (225 x 97 x 99) (210 x 81 x 92) (192) (64) (181) (75) (162) (56) (56) 4P x 3.81 x x 3.19 x lbs. (283 x 97 x 99) (267 x 81 x 92) (249) (64) (238) (75) (219) (56) (56) 5P x 3.63 x x 3.03 x lbs. (350 x 92 x 80) (335 x 77 x 73) (318) (60) (314) (70) (296) (52) (61) 6P x 3.63 x x 3.03 x lbs. (441 x 92 x 80) (426 x 77 x 73) (409) (60) (405) (70) (387) (52) (77) ll measures are in inches, items in parentheses are in millimeters. Note: Shown 3P for Reference. Stahlin Enclosures 500 Maple Street, elding, MI Phone: ax: Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San rancisco, C Main Office: (650) Outside Local rea: (800)
5 Push utton Technical Specifications - configuration - 4 cover screws, lift off cover 22mm Construction Material Gasket Cover screws Stainless Steel Hardware Enclosure mounting Soft Edge Design Hot compression molded fiberglass reinforced polyester (thermoset) Poured polyurethane seamless gasket provides watertight, dust-tight environmental seal Recessed captive stainless steel screws 300 stainless used on all external hardware Mounting wells located under the cover, outside gasket area Rounded edges, minimal protrusions or exposed pocket areas for assembly of dust and debris NOTES: Industry Standards UL/cUL 50 ile E64358 Type 1, 3R, 4X, 6P, 12 NEM 250 Type 1, 3R, 4X, 6P, 12 CS Std C22.2 ile LR Type 1, 3R, 4X, 6P, 12 Temperature Range (-76 to +274 ) (-60 C to +134 C) lammability Rating UL94-5V Self Extinguishing Non-flame propagating Chemical Resistance ull chemical resistance charts listed in appendix NP No. 101 lame Spread Class (1) ccessories Mounting eet Mounting eet pg. 157 Modifications Custom Colors pg Custom Painting pg Silk Screening pg Custom Cutouts/Holes pg Stahlin Enclosures 500 Maple Street, elding, MI Phone: ax: Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San rancisco, C Main Office: (650) Outside Local rea: (800)
6 22mm In-Line Configuration Technical Drawings W J O C 1.56 (40) M H I 1.56 (40) 1.56 (40) SECTION - L D.125 (3) K N.875 (22).468 (12) SECTION - RONT VIEW WITHOUT COVER Enclosures - 22mm In-Line Configuration Dimensions SIZE ID NUMER OVERLL H X W X D INSIDE X X C I J K L M N O SHIPPING WEIGHT 1P x 3.81 x x 3.19 x lbs. (168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (84) 2P x 3.81 x x 3.19 x lbs. (168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (64) 3P x 3.81 x x 3.19 x lbs. (168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (44) 4P x 3.81 x x 3.19 x lbs. (225 x 97 x 99) (210 x 81 x 92) (192) (64) (181) (75) (162) (56) (53) 5P x 3.81 x x 3.19 x lbs. (283 x 97 x 99) (267 x 81 x 92) (249) (64) (238) (75) (219) (56) (62) 6P x 3.81 x x 3.19 x lbs. (283 x 97 x 99) (267 x 81 x 92) (249) (64) (238) (75) (219) (56) (42) ll measures are in inches, items in parenthesis are in millimeters. Note: Shown 4P-22 for Reference. Stahlin Enclosures 500 Maple Street, elding, MI Phone: ax: Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San rancisco, C Main Office: (650) Outside Local rea: (800)
7 Push utton Technical Specifications - configuration - 4 cover screws, lift off cover 30mm Construction Material Gasket Cover screws Stainless Steel Hardware Enclosure mounting Cover retention Panel Mounting Soft Edge Design Hot compression molded fiberglass reinforced polyester (thermoset) Poured polyurethane seamless gasket provides watertight, dust-tight environmental seal Recessed captive stainless steel screws 300 stainless used on all external hardware Integral mounting flange for ease of mounting Stainless steel beaded cover retention chain Raised bosses with brass inserts accepting screws for optional panel mounting Rounded edges, minimal protrusions or exposed pocket areas for assembly of dust and debris NOTES: Industry Standards UL/cUL 50 ile E64358 Type 1, 3R, 4X, 6P, 12 NEM 250 Type 1, 3R, 4X, 6P, 12 CS Std C22.2 ile LR Type 1, 3R, 4X, 6P, 12 Temperature Range (-76 to +274 ) (-60 C to +134 C) lammability Rating UL94-5V Self Extinguishing Non-flame propagating Chemical Resistance ull chemical resistance charts listed in appendix NP No. 101 lame Spread Class (1) ccessories Mounting eet Mounting eet pg. 155 Modifications Custom Colors pg Custom Painting pg Silk Screening pg Custom Cutouts/Holes pg Stahlin Enclosures 500 Maple Street, elding, MI Phone: ax: Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San rancisco, C Main Office: (650) Outside Local rea: (800)
8 Multi-Hole Configuration Technical Drawings W HOLE DI. 4 PLC'S. O 2.25 (57) C N K E H M P 2.25 (57) SECTION (5) J D (31).672 (17) L SECTION - Enclosures - Multi-Hole Configuration Dimensions CTLOG NUMER HOLE CONIG. OVERLL H X W X D INSIDE X X C MOUNTING E X J K L M N O P HOLE DI. SHIPPING WT. PNEL NUMER 4PW 2 x x 7.50 x x 5.72 x x lbs. P66* (191 x 191 x 121) (145 x 145 x 113) (171 x 101) (101) (108) (108) (6) (191) (67) (67) (8) 6PW 3 x x 7.50 x x 5.74 x x lbs. P86* (244 x 191 x 121) (196 x 146 x 113) (225 x 101) (101) (159) (108) (6) (242) (67) (64) (8) 9PW 3 x x 9.41 x x 7.73 x x lbs. P108* (295 x 239 x 108) (247 x 196 x 101) (273 x 152) (89) (209) (159) (6) (288) (87) (62) (8) ll measures are in inches, items in parentheses are in millimeters. Note: Shown 6PW for Reference. * Panel ordered separately. Stahlin Enclosures 500 Maple Street, elding, MI Phone: ax: Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San rancisco, C Main Office: (650) Outside Local rea: (800)
Spec Tech Industrial Electric Control Enclosures
Control Enclosures N Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
More informationControl Enclosures. Type 1, 3, 3R, 4X, 12 as designated. Type 1, 3, 3R, 4X, 12 as designated WT, HWT, FHLWT
Control Enclosures Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
More informationThe DiamondShield Series DS
The DS The was developed for design flexibility and pleasing aesthetics. Applications include high-end electronics, harsh corrosive environments, and industrial applications both indoors and out. Unique
More informationThe JW Series JW. Featured Highlights. The JW Series is Applicable for Many Industries including: The JW Series. JW Series Attributes
The Series The Series The Series enclosures adds a max sized flush mounted window to the standard cover fiberglass enclosure. The result is a low profile enclosure with great internal component visibility.
More informationThe TeleControl Series Technical Drawings
The TeleControl Series Technical Drawings TeleControl TeleControl Enclosures Dimensions SIZE ID NUMBER OVERALL H X W X D INSIDE A X B X C E X F J K L M N HOLE DIA. SHIPPING WEIGHT PANEL NUMBER J1407TC
More informationOperator Enclosures. Console Type 12 - AW-14 Data Sheet
Console Data Sheet Construction Console body, panel cover and door, top assembly and writing desk are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Panel cover is secured
More informationType 4 X Panel Enclosures
Ground-Mount s Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing out frames
More informationPhone: Fax: Web: -
empire SERIES For your largest applications, turn to the Empire Series from Allied Moulded. Fiberglass construction offers durability and strength without the excessive weight of a comparable metal enclosure.
More informationStandard Product. Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories
Spec-00144 Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories ULTRX WiFi, Type 4X INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cul Listed per CSA C22.2
More informationStandards IEC IEC 529 Rated IP66-9 EN EN Mounting frame: removable predrilled reinforced DIN-rails
Features - The range is available in seven sizes, ranging from 12" x 8" to 40" x 32". - The cabinets are made of beige (RL 7032) hot molded fiberglass reinforced polyester, dyed in mass. The enclosure
More informationDisconnect Enclosures
Type 12 Heavy-Duty Single & Multi-Door Data Sheet pplication Houses electrical controls and equipment Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508
More informationTURCK Inductive Sensors - Rectangular
Courtesy of Steven Engineering, Inc. 30 Ryan Way, South San Francisco, C, 94080-6370 Main Office: (650) 588-900 Outside Local rea: (800) 58-900 www.stevenengineering.com TURCK Inductive Sensors - Rectangular
More informationD I D /240 I. D x /240 I D / x x /24 I. D x /120
ndustrial ontrol Transformers lass 9070 www.square.com or the most up-to-date information The T units are designed for the global market and are the best choice when size and cost are of concern. This
More informationSolar Combiner Solutions
Combiner Solutions Built to UL1741 standards NEMA 4X (fiberglass and stainless steel) NEMA 3R (painted steel) Made in America Combiners and disconnects that offer superior resistance and durability from
More informationEPIC Pin & Sleeve Connectors EPIC
EPIC 1 Courtesy of Steven Engineering, Inc.-20 Ryan Way, South San Francisco, CA 080-0-Main Office: (0) 88-200-Outside Local Area: (800) 28-200-www.stevenengineering.com Global Power Connectors for the
More information[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]
[ SOLUTIONS FOR AUTOMATION & ONTROL DEVIES: ] INDUSTRY STANDARDS Solid hinged cover models. Mounting brackets required to meet UL/SA external mounting requirements. FEATURES remove and -install hinge pins
More informationPanel Size. Conductive
Spec-00402 ULTRX, Type 4X INDUSTRY STANDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E697 cul Listed per CSA C22.2
More informationPolymas Watertight PK Enclosures Product Drawings Last Updated 1/6/2006
PHOENIX MECNO COMPNY PK Enclosures Product Drawings Last Updated 1/6/2006 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 301-696-9800 www.rose-bopla.com customerservice@rose-bopla.com For
More informationFeatures and Benefits
10x8x6 premium line ECO FRIENDLY MDE IN THE US Premium Polycarbonate Enclosure Features and enefits 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel
More informationNEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series
NEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series Applications SN4 Series Designed to house the following: Allen-Bradley Bulletin 1494V disconnect switches with flange-mounted variable
More informationSolar Combiner Solutions
Solar Combiner Solutions Providing combiners and disconnects that offer superior resistance and durability from harsh weather and abusive solar environments Solar Technology Leading the way in Solar Technology
More informationNumber of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures
us enclosures G. us enclosures Enclosure:.38 Door:.5 IP 65 to EN 60 59/09.00, complies with NEMA. Door with l/h hinge, cam lock with double-bit insert, () support rail(s) S 35/7.5 (for G 586.). Drilled
More informationTube Applicable for nylon, soft nylon and polyurethane tubing.
Miniature Fittings Series M pplicable Tubing: ø3.2, ø4, ø6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
More informationType 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
More informationULTRX, Type 4X. Panel Size. Conductive
Spec-00402 EPH FX (763) 422-2600 422-21 Non-Metallic Fiberglass Industry Standards Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File
More informationAM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles Compatible with UL 1686 C1 Pin & Sleeve Devices Safer. Easier. Better. MENNEKES Non-Metallic MSR Switched and Interlocked
More informationTrough, Wireway & Strut Attributes
Trough, Wireway & Strut Trough, Wireway & Strut Stahlin offers a broad range of auxiliary products designed to complement a full non metallic wiring system. Wire management through a corrosion resistant
More informationDiameter (mm) Sinking. Sourcing. Drawing # Wiring Diagram # of LEDs. Bi10NF-M30-AN6X A M
Courtesy of Steven Engineering, Inc. Ryan Way, South San Francisco, C, 94080-6370 Main Office: (650) 588-900 Outside Local rea: (800) 58-900 www.stevenengineering.com TURCK Inductive Sensors - Specialty
More informationFiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006
ROSE+BOPLA ENCLOSURES A PHOENIX MECANO COMPANY Fiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006 Dimensional Drawings All sizes are available with an optional clear viewing lid.
More informationType 4 Panel Enclosures
Ground-Mount Enclosures Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish pplication Houses electrical controls and instruments Easy access panels or
More informationBenefits. Safety. Durability. Performance. Russellstoll. Heavy Industrial/ Marine
eavy Industrial/ Marine Benefits builds a variety of benefits into one plug, receptacle and interlock system for your application. Safety Waterproof construction: standard neoprene O ringed interior components
More informationWatertight control boxes. Adaptability Modularity Safety Reliability
Offer daptability Modularity Safety Reliability Creating Control and Signalling Solutions for Harsh Environments The range of possibilities : wide choice - Select your box from the numerous ranges developed
More information14x12x7 Inch 48 VDC (PoE) Power-Over-Ethernet Powered, Weatherproof & Insulated with Heating System - Model: NB H0N
14x12x7 Inch 48 VDC (PoE) Power-Over-Ethernet Powered, Weatherproof & Insulated with Heating System - Model: NB141207-4H0N Applications and Features Features: Molded Fiberglass Reinforced Polyester (FRP)
More informationMiniature Fittings Stainless Steel 316. Hose nipple. Barb Configuration for easy insertion into the tube Holds the tube tightly.
Miniature Fittings Stainless Steel 316 Series MS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose nipple
More informationPolycarbonate Watertight 03 Product Drawings Last Updated 6/18/2008
ROSE+BOPL PHOENIX MECNO COMPNY Polycarbonate Watertight 03 Product Drawings Last Updated 6/18/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 301-696-9800 www.rose-bopla.com rbinfo@pm-usa.com
More informationNEW Cross Reference Tables See Pages 9-12
NEW Cross Reference Tables See Pages 9-12 Courtesy of Steven Engineering, Inc. 230 Ryan Way, South San Francisco, CA 94080-6370 General Inquiries: (800) 670-4183 www.stevenengineering.com Wetguard Product
More informationTubular Centrifugal Fans
Tubular Centrifugal Fans Model TCB Inline - Horizontal or Vertical Roof Upblast and Roof Supply March 2007 Tubular Centrifugal Fans The TCB series of inline centrifugal fans is designed for ducted inline,
More informationApprovals, see page 41. Detailed drawing, see page 1226/1227.
Ex enclosures Stainless steel F G B.7 With screw-fastened lid Material: Stainless steel.40 (AISI 04) Surface finish: Brushed, grain 40 Protection category: IP 66 to EN 60 9/09.00 Supply includes: Enclosure,
More informationFree-Stand, Single or Dual Access, Type 12
Spec-00291 ree-stand Enclosures Type 12 ree-stand Enclosures ree-stand, Single or Dual Access, Type 12 INDUSTRY STANDARDS UL 508A Listed; Type 12; ile No. E61997 cul Listed per CSA C22.2 No. 94; Type 12;
More informationESW/PESW. Non-Combination Starters
ESW/PESW Enclosed Non-Combination General WEG offers non-reversing and non-combination magnetic starters up to 75HP at 460Vac (105). Featuring components that meet IEC design standards and UL horsepower
More information5500 Series compact pistol grip station 5500/5600 Series single, dual & variable speed stations 5700 Series rubber enclosure pendant stations
5500 Series compact pistol grip station 5500/5600 Series single, dual & variable speed stations 5700 Series rubber enclosure pendant stations Introduction ricson Manufacturing Company provides single,
More informationMipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service
No One Does It Like Mipco Mipco Interlocked Reefer Power Outlets are used extensively in port terminals and shipboard applications to provide a safe, watertight electrical connection for refrigerated containers.
More informationHelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
More informationNEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series
NEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series Applications N412_CD Series Designed to house the following: AutomationDirect.com NEMA 1/12 Flexible shaft handle for Molded
More informationIndustrial Grade HEAVY DUTY LOCKING KEY LOCK. AC Control with. Keyed Actuator. 15, 20 & 30 Amp 120/277V AC
SECTION C Switches Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, C 94080-6370-Main Office: (650) 588-9200-Outside Local rea: (800) 258-9200-www.stevenengineering.com Switch Types
More informationQO and QOU Miniature Circuit Breakers QOU Miniature Circuit Breakers
QO and Miniature ircuit reakers Miniature ircuit reakers lass 720 / Refer to atalog 0730T9801 Low mpere Miniature ircuit reakers unit mount miniature circuit breakers (cable-in/cable-out) are ideal for
More informationType 4 Panel Enclosures
Type 4 Lift-Off Cover ata Sheet Seamless poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use Protects against windblown dust and rain, splashing
More informationCable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings
Cable Management Solutions HelaGuard Non-Metallic Conduits and Fittings Table of Contents Page HelaGuard Overview 4 Conduit Application Overview 6 Mounting & Removing HelaGuard Non-Metallic Fittings 7
More informationWall-Mount Enclosures
Wall-Mount Enclosures Protection When Safety Matters Most When selecting an enclosure, application can be associated with market or product. For example, is your enclosure going to be used in a petrochemical
More informationIP65/IP66 ABS/Polycarbonate Screw Lid Boxes
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes p Versatile, lightweight & durable p Choice of materials: polycarbonate for rugged applications or ABS as an economic alternative p IP protection for outdoor
More information8146 Series F16 CONTROLS CONTROL STATION IN POLYESTER RESIN. Features: Components:
8146 Series ONTROLS ONTROL STTION IN POLYESTER RESIN LSSIFITIONS NE- lass I, Zones 1 & 2 Ex e II T6 lass I, ivision 2, Groups,,, lass II, ivision 2, Groups F,G lass III NEM 3,4 & 4X; IP66 LISTE - FILE
More informationType 4X Panel Enclosures
Ground-Mount Enclosures Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing
More informationType 4X Panel Enclosures
Type 4X Lift-Off Cover ata Sheet Seamless, poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
More informationWallmount EnclosurEs smart DEsign superior protection
Wallmount Enclosures Smart Design Superior Protection The global Industrial Enclosure leader Since 1961, Rittal has revolutionized industrial enclosure technology by offering solutions that are easy to
More informationGateway System Serial Transmission System
Gateway System Series 00 I compliant V S000 C Tie-rod base Z pplicable series Cassette base manifold 000/000 Tie-rod base manifold 000/000/000/000 Number of output points: points Connected to the 00GW
More informationSECTION. Watertight & Dust-Tight Plugs & Connectors
SECTION Watertight & ust-tight Wetguard Product Line Section Contents LIFETIME Wetguard Plugs, Connectors & Straight Blade 2-Pole 3-Wire 2-Pole 3-Wire 3-Pole 4-Wire 3-Pole 3-Wire Non- 4-Pole 4-Wire Non-
More informationCompact Rotary Actuator
Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm 360 type 360 CR2 CRU2 CR1 MSU CRJ CR1 MSQ MSZ MSQ MRQ Series Variations Standard Made to Order Rotating angle
More informationT1 Wire Duct Series: Rigid PVC, self-extinguishing Light GREY RAL 7030 or WHITE. 6 Feet 6 3/4 Inches Duct complete with cover
PRODUCT FEATURES Restricted slot opening for wire retaining. Two predetermined breaklines: - for breaking off and removal of sidewall finger segments only. - for removal of sidewall finger and base segments.
More informationPhone: Fax: Web: -
control series The larger ontrol Series offers standard features as well as full-panel access and all usable panel space. In addition, the standard grey cover is available with or without a full-length
More informationApplications. Illustrated Features
Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing
More informationPower Clamp Cylinder
ower lamp ylinder onforming to the ew S Standard Series Z2 ompliant ew Special /()U or rance ZR or urope ZT or orth merica Z2 2T/2/ () or sia 2 ourtesy of Steven ngineering, nc.-2 Ryan Way, South San rancisco,
More informationWall-Mount Enclosures CONCEPT Wall-Mount Enclosures
Spec-00286 H763.422.2211 763.422.2600 Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures, Type 4 and 12 INDUSTRY STANDARDS Wall-mounting brackets required to maintain
More information800 T P B H 16 R. Momentary Contact Push Button Devices, Illuminated. 8 Rockwell Automation Publication 800-TD009A-EN-P
Momentary Contact Push utton Devices, Illuminated Extended Head Without Guard Cat. No. 800T-P16R Extended Head without Guard Cat. No. 800H-PR16R 800 T P H 16 R a Protection Rating T Metal, Type 4/13 H
More informationEPIC. Pin & Sleeve Connectors PIN & SLEEVE CONNECTORS
PIN & SLEEVE CONNECTORS Reference Pin & Sleeve Overview 461 Pin & Sleeve Products Overview 462 CEE series, MULTIMAX series, ULYSSE series, ALUPRES series Pin & Sleeve Construction 464 MULTIMAX Installation
More information5 Port Mechanical Valve Metal Seal. Specifications Fluid. Basic Roller lever. Mechanical operation. One way roller lever.
5 ort Mechanical Valve Metal Seal Compact design, large flow capacity 9.9 mm High cycle rate, long life/00 c.p.m. or less iping possible to any EXH port. roper countermeasures can be taken for applications
More informationAllen-Bradley 800T-FXD16RA1
NEM Push utton Specifications 800T/H 30.5 mm Push uttons 2-Position Push-Pull and Push-Pull/Twist Release Devices, Illuminated Note: jumbo or large legend plate is recommended, if space allows. Illuminated
More informationINDUSTRIAL ELECTRICAL AND EXPLOSIONPROOF ENCLOSURE SYSTEMS
ADALET A SCOTT FETZER COMPANY INDUSTRIAL ELECTRICAL AND EXPLOSIONPROOF ENCLOSURE SYSTEMS #NCAT01 REV. D FOR CENELEC APPROVED UNITS SEE PAGE 2 14562 Pg 00-00 12/2/00 12:36 PM Page 1 Designing Our Products
More informationAdjustable Difference on Decreasing Pressure (adds to working pressure) Y (lower) Actuator
Pressure Switches Differential/Dual Stage, G lass 90 / Refer to atalog 90T901 Differential Pressure Switch Differential pressure switches monitor the change in the difference between two pressures. G differential
More informationPower Distribution Blocks
Power Distribution Blocks One powerful way to manage your power distribution problems. Your problem: You re facing the enormously complex wiring requirements of an automated manufacturing facility. Or
More informationELECTRICAL ACCESSORIES FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
ELECTRICL CCESSORIES FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Electrical Fittings Receptacles Fixture Hangers ccessories and Connectors Junction Boxes In-Channel Joiners Swivel Hangers Cable Entrance Tubing
More informationCam-Lok Single Pole Connectivity. The industry standard for reliable service under the most severe operating conditions.
Cam-Lok Single Pole Connectivity The industry standard for reliable service under the most severe operating conditions. Cam-Lok Single Pole Connectivity Cam-Lok connectors are the industry standard Cam-Lok
More information800 T FX 1 A1. Color Cap. No cap 1 Green 2 Black 3 Orange 4 Grey 5 White 6 Red 7 Blue 9 Yellow. Contact Block(s) Operator Position.
NEM Push utton Specifications 800T/H 30.5 mm Push uttons 2-Position Push-Pull and Push-Pull/Twist Release Devices, Non-Illuminated Note: jumbo or large legend plate is recommended, if space allows. 2-Position
More informationDirect Air Operated 2 Port Valve/Manifold For Air, Gas, Vacuum and Oil
The VX series will be revised shortly. 1 Direct Operated 2 Port Valve/ For, Gas, Vacuum and Oil Series VVXA21/22 Common SUP type and individual SUP type (for vacuum use) standard models Compatible with
More informationcpci PANELS EXTRUDED FRONT PANELS
cpci PNELS EXTRUDED FRONT PNELS cpci 4HPx6U 0.135 (3.43) 0.784 (19.92) 0.685 (17.40) 0.545 (13.84) 0.394 (10.01) 0.330 (8.38) 0.118 (3.0) 0.580 (14.73) cpci 4HPx3U 0.295 (7.49)2x 0.234 X 0.130 0.120 R
More informationRelays & Sockets. RR Series Power Relays. Part Number Selection. Key features: Sockets IDEC (4332) USA & Canada
Key features: SPDT through PDT, 0 contacts Midget power type relays vailable in pin and blade terminal styles. Options include an indicator, check button for test operations and side flange. Series Power
More informationNATURAL HIGH IMPACT STRENGTH COPPER FREE ALUMINUM Number of Wires VAC AT 50 TO 400 HZ/250 VDC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com AR331 30 Amp Pin & Sleeve Recpt 3-W 3-P 250VDC/600vac Cooper Crouse-Hinds Catalog Number
More informationand Refrigeration Institute). CNX Special Purpose Contactors
Series C7 Special Use Contactors Contactors designed and labeled for specific industrial applications Special Use Contactors Hydraulic elevator duty contactors HVC rated contactors Lighting contactors
More informationStandard Product. Polyester powder paint; RAL 7035 textured light gray standard Custom colors available
Spec-01193 PROLINE G2 External Components Tops Solid Top 16 gauge (1.5 ) steel Additional support provisions need to be made to support top mount air conditioners or other top mount accessories Includes
More informationType 4X Panel Enclosures
Type 4 s Type 4 s Type 4 Single-Door Data and Illustration Sheet Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
More informationSTAINLESS STEEL ENCLOSURES
Electromechanical components STINLESS STEEL ENCLOSURES GL66 SERIES [ REEFINING STNR ] GL66 LL-MOUNT ENCLOSURES: INGE COVER [ GL66 SERIES STINLESS STEEL ] INGE COVER LL-MOUNT ENCLOSURES Manufactured in
More informationtable of contents Switches J 1 SECTION SECTION J Quick Guide to Switches... J2-J3
table of contents Switches Quick Guide to Switches....................................... J2-J3 Push Switches.............................................. J4-J7 Single Pole ON-OFF.......................................
More informationTaxonomies, Classifications, and Categories CIRCUIT BREAKING, COMPRESSOR, CONVEYOR, MOTOR GENERATOR SET, POLARIZED, WELDER
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AP20467S22 3W-4P 200A Plug Cooper Crouse-Hinds Catalog Number AP20467S22 Manufacturer Cooper Crouse-Hinds Description
More informationGREASE INTERCEPTORS. OPTIONS and VARIATIONS
All grease interceptor options and variations are specified as a PREFIX and/or SUFFIX letter or number added to the series designation. Listed below are the available options and a brief description of
More informationSpecifications Valve. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette
Finger Valve Series VHK ohs Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing
More informationLow Profile Slide Table Series MXF ø8, ø12, ø16, ø20
Low Profile Slide Table Series XF ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. eat appearance Protecting stopper section with
More informationSeries SV1000/2000/3000/4000
Valve/Sub-plate Type IP67 Compliant Series 000/000/000/000 How to Order C () () () () () () (E) (E) () (E) (E) () () (E) (E) () () (E) (E) () () (E) (E) Type of actuation position single position double
More informationJUNCTION BOXES AND SUNSHADES
JUNCTION BOXES AND SUNSHADES Description The SITES S.r.l. enclosure system winterizes process instruments and protects them from corrosion and mechanical abuse. A full range of enclosures sizes are available
More information15-kV Live Terminal 200 Amp Mini-Switch Source-Isolated Pad-Mounted Switchgear 40 Amp (Max) Arc-Strangler NX Fuses
Page 1 2015 Heavy duty 11-gauge steel enclosure is all-welded construction for long life Door safety barrier removal instructions Safety latches on the door safety barriers, front and rear, are insulating
More informationAMERICAN FLOW CONTROL 4"-48" SERIES 2500 TAPPING VALVES
AMERICAN FLOW CONTROL 4"-48" SERIES 2500 TAPPING VALVES FEATURES/SPECIFICATIONS/MAINTENANCE FEATURES AMERICAN provides tapping valves for sizes 4 in. 48 in. rated at 250 psig pressure. Tapping valves 4
More informationNew Sentry Elite is Packed with Features
New Sentry Elite is Packed with Features Sentry Elite 4 with Parking Garage Lens engineers have focused decades of expertise in vapor tight fixture kits to develop the feature-packed Sentry Elite. It has
More informationStraight Blade Plugs and Connectors
Plugs and Connectors Industrial, Commercial and Residential rade Leviton offers a complete line of 2-, 3-, and 4-wire straight blade plugs ands connectors that resist impact, corrosion and chemicals. The
More informationThermal-Magnetic Circuit Breaker 201/-WA
Thermal-Magnetic Circuit Breaker 0/-WA Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Featuring
More informationDimensions (In.) Max. Ins. Color Code Red Blue.155
REEL SMRT Termination System Disconnects DNG Courtesy of Steven Engineering, Inc. 230 Ryan ay, South San Francisco, C, 94080-6370 Main Office: (650) 588-9200 Outside Local rea: (800) 258-9200 www.steveneng.com
More informationPin & Sleeve Devices. Series and IEC Configuration
Pin & Sleeve Devices Series 309-1 and 309-2 IEC Configuration Leviton s are designed for high quality distribution of electrical power in industrial facilities. These devices are ideal where heavy electrical
More informationMulti-function. Mono-function 1 NO (SPST-NO)
Features Range of electronic staircase timers 17.5 mm wide Time setting from 30 s to 20 min Zero crossing load switching Switch-off early warning - model 14.01 Suitable for 3 or 4 wire systems, with automatic
More informationSeries 810: 2 Way Angle Body Valves: 1/4 to 3 NPT
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT FEATURES Compact design, high fl ow rates Visual position indicator standard For temperatures from 22 F to +430 F / -30 C to 221 C Working pressures up
More information2000 Series Geared Rotary Limit Switches
SUPERIOR DESIGN AND OPERATING FEATURES Quality parts make each Geared Rotary Limit Switch highly dependable. The limit switch s ½ input shaft drives a bronze gear which rotates the cam block. The cam block
More informationClass 0734, 0500 / Refer to Catalogs: 0734CT0201, 0500CT9702. PowerPact G-Frame 3P 100 A Thermal-Magnetic Circuit Breaker (600Y/347 Vac)
MINITUR N MOL S IRUIT RKRS PowerPact ircuit reaker JL 3P ircuit reaker QL 2P 0 250 QL 3P 0 250 Tale.46: mpere - and Q-rame ircuit reakers lass 034, 0500 / Refer to atalogs: 034T0201, 0500T902 PowerPact
More informationINDUSTRIAL SOLUTIONS Wallmount Enclosures...pgs IND 1-46 Wireway/Trough...pgs IND Freestanding Enclosures...pgs IND FMD Enclosures...
INDUSTRIL SOLUTIONS Wallmount s...pgs IND 1-46 Wireway/Trough...pgs IND 47-60 Freestanding s...pgs IND 61-72 FMD s...pgs IND 73-86 Operator Interface...pgs IND 87-136 Noncorrosive...pgs IND 137-193 I N
More information4400JF (120V) Aerating Fountain Specifications
4400JF (120V) Aerating Fountain Specifications This specification is written and intended to provide bidders the necessary information pertaining to the floating aerating fountain(s) or surface aerator
More information