14x12x7 Inch 48 VDC (PoE) Power-Over-Ethernet Powered, Weatherproof & Insulated with Heating System - Model: NB H0N
|
|
|
- Drusilla Carson
- 5 years ago
- Views:
Transcription
1 14x12x7 Inch 48 VDC (PoE) Power-Over-Ethernet Powered, Weatherproof & Insulated with Heating System - Model: NB H0N Applications and Features Features: Molded Fiberglass Reinforced Polyester (FRP) industrial Enclosure with Foam insulation to minimize heat loss in sub-zero installations Stainless steel quick release latches with padlock hasps NEMA Type 4, 4X / IP66 rated Fully gasketed raised lid & integral mounting flange Features aluminum mounting plate & Thermostat-controlled heating system Power provided to the heating system from remote mounted DC Injector and Power Supply (Included) Applications: Remote Wireless LAN WiFi equipment installations Rapid Deployment & Indoor/outdoor installations. 100% Foam insulated to minimize heat loss in subzero installations Corrosive environments. Hotspot applications Protection of equipment from theft or damage
2 Product Description Start with the Box... The box is a rugged weatherproof NEMA Type 4X insulated enclosure that is ideal for both indoor and outdoor applications. Constructed from molded fiberglass reinforced polyester, it is well suited for high temperature or corrosive environments. The mounting flange allows it to be wall mounted as well as on a flat surface. The raised lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The raised lid is fully gasketed. The enclosure material is UV stabilized and comes in machine tool gray. Sub-zero Applications The NB141207C-4H0N enclosure is designed for use in sub-zero environments down to -30 F (-34 C). It features a 48 VDC thermostat controlled heating system that will along with the heat generated by an internal device such as an access point, maintain a nominal internal ambient temperature of +40 F (4 C). A single CAT5 cable provides power to the heating system from a remote mounted DC Injector and Power Supply which are included with the enclosure. An additional CAT5 cable would then be used to supply data and power to installed PoE equipment. Mounting Plate The aluminum mounting plate has provisions to mount WLAN equipment from Cisco, Symbol, D-Link, HyperLink and more (see mounting plate drawing). With the optional HGX-AMOUNT02 bracket a wide array of HyperLink Amplifiers, Power-Over-Ethernet products and Power Supplies can be mounted as well. Two of these brackets can be mounted side by side. Also available is the HGX-NMOUNT03 Universal Mounting Shelf that can be attached to the mounting plate and can accommodate additional equipment to be placed in the enclosure. This enclosure includes: BT-CAT5-NB2 - DC Injector: used to supply heating system power to a single NB H0N sub-zero Heated Enclosure. PS R - 70W Power Supply for BT-CAT5-NB2 DC Injector: 48VDC@70W, 110/220 VAC, 2.5mm DC Plug Application Note: The Hyperlink NB H0N sub-zero NEMA enclosure uses a proprietary wiring pin out. The RJ-45 connectors on the NB H0N sub-zero NEMA enclosure or the Hyperlink sub-zero DC power injector, should never be connected to any other manufacturers equipment. Hyperlink Technologies, Inc. is not liable for any damage done to incompatible equipment due to misuse of the Hyperlink subzero NEMA equipment.
3 Enclosure Specifications Enclosure Material Enclosure Color Weight Dimensions (max) Environmental Ratings* Fiberglass Reinforced Polyester Machine Tool Gray 10.8 lbs (4.9 kg) Flame Rating UL 94-5V Temperature Rating (Depending on Equipment and Options) Enclosure Hardware Cable Feed Mounting Plate Material 15.5 x 13.5 x 7.7 inches (39.3 x 34.2 x 19.5 cm) NEMA Type 4, 4X / IP66 Down to -34 C (-30 F to 110 F) Stainless Steel 1/2 Cable Conduit Connector.10 (2.5mm) Thick Anodized Aluminum *Note: Enclosure ports (Cable conduit connector and N-type holes for lightning protectors or connectors) must be properly sealed to maintain NEMA Type 4, 4X / IP66 rating. DC Injector Specifications Enclosure Material Weight Dimensions Cast Aluminum Alloy.28 lbs (.13 kg) 3.6 x 1.4 x 1.2 inches (91.4 x 35.5 x 30.4 mm)
4 Enclosure Dimensions
5 Mounting Plate Dimensions
6 Application Diagram
Phone: Fax: Web: -
empire SERIES For your largest applications, turn to the Empire Series from Allied Moulded. Fiberglass construction offers durability and strength without the excessive weight of a comparable metal enclosure.
Phone: Fax: Web: -
control series The larger ontrol Series offers standard features as well as full-panel access and all usable panel space. In addition, the standard grey cover is available with or without a full-length
Fiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006
ROSE+BOPLA ENCLOSURES A PHOENIX MECANO COMPANY Fiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006 Dimensional Drawings All sizes are available with an optional clear viewing lid.
The TeleControl Series Technical Drawings
The TeleControl Series Technical Drawings TeleControl TeleControl Enclosures Dimensions SIZE ID NUMBER OVERALL H X W X D INSIDE A X B X C E X F J K L M N HOLE DIA. SHIPPING WEIGHT PANEL NUMBER J1407TC
M9000-3xx Series Weather Shield Enclosures
M9000-3xx Series Weather Shield Enclosures Product Bulletin Code No. LIT-1201704 Issued June 2016 Refer to the QuickLIT website for the most up-to-date version of this document. The M9000-3xx Weather Shield
APPLICATION NOTE Calculating temperature rise when mounting wireless LAN access points into Oberon s NEMA rated indoor/outdoor enclosures
APPLICATION NOTE Calculating temperature rise when mounting wireless LAN access points into Oberon s NEMA rated indoor/outdoor enclosures Introduction to Thermal Considerations When mounting active (powered)
Type 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
High-Performance Industrial Emergency LED Lighting LHP & LHPR SERIES
High-Performance Industrial Emergency LED Lighting LHP & LHPR SERIES The LHP Series offers many advantages in an industrial environment LHP SERIES Illuminates wide, open areas such as warehouses, manufacturing
EQUIPMENT PROTECTION
Contractor Specifier s Guide EQUIPMENT PROTECTION WWW.PENTAIRPROTECT.COM/HOFFMAN Volume 8 Hoffman Has You Covered From utility junctions to protecting relays, contactors and wire, Hoffman has you covered.
The UL Type 3R Package is specifically designed for Adjustable Frequency Drives, such as Yaskawa's E7, F7, G7, P7, and iqpump models.
The UL Type 3R Package is specifically designed for Adjustable Frequency Drives, such as Yaskawa's E7, F7, G7, P7, and iqpump models. A new benchmark for performance, benefits and quality, the UL Type
Mobile Control Units 2930, 2940, 2950 Handheld Enclosures Product Drawings Last Updated 6/20/2008
Mobile Control Units 2930, 2940, 2950 Handheld Enclosures Product Drawings Last Updated 6/20/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 301-696-9800 www.rose-bopla.com rbinfo@pm-usa.com
Standard Product. Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories
Spec-00144 Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories ULTRX WiFi, Type 4X INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cul Listed per CSA C22.2
Weather Protective Devices
Weather Protective Devices N Industrial Specification Grade Receptacle Covers N-1, N-2 Weather Protective Devices N-3 Power-Lock Receptacles and Flanged Inlets with Weather Protective Lift Lids N-4 50
Solar Combiner Solutions
Combiner Solutions Built to UL1741 standards NEMA 4X (fiberglass and stainless steel) NEMA 3R (painted steel) Made in America Combiners and disconnects that offer superior resistance and durability from
M-2900A Tapchanger Control Cabinet
CONTROLS M-2900A Tapchanger Control Cabinet New installations or retrofit for Cooper, General Electric, Siemens and Howard regulators NEMA 3 rated enclosures available in the following construction materials:
CLIMAGUARD Outdoor Heat Exchangers
Product Overview : CLIMAGUARD Outdoor Heat Exchangers TX23 Model TX38 Model TX52 Model 132 Product Overview : Lab- and field-tested to seal out extreme weather CLIMAGUARD Outdoor Heat Exchangers PRODUCT
Standard Product. Type 4 Free-Stand Enclosures and Accessories
763.422.2600 Spec-00294 F763.422.2211 Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand, Type 4 INDUSTRY STANDARDS
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes p Versatile, lightweight & durable p Choice of materials: polycarbonate for rugged applications or ABS as an economic alternative p IP protection for outdoor
Dual ground lug - one lug for earth ground, one lug for utility ground.
The Type 3R Package is specifically designed for Yaskawa Variable Frequency Drives. The Type 3R outdoor duty package is not just a "NEMA 3R" self-declared rating. Yaskawa went beyond its own stringent
Sealtight LED Luminaire
CATALOG NO. TYPE NO. JOB NAME ORDERING INFORMATION Catalog Number: Example: SLT434KDRB SLT FAMILY SLT - Sealtight Luminaire ACCESSORIES 23-2300 nominal 35-3500 nominal 43-4300 nominal 51-5100 nominal COLOR
ULTRX, Type 4X. Panel Size. Conductive
Spec-00402 EPH FX (763) 422-2600 422-21 Non-Metallic Fiberglass Industry Standards Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File
Enclosure Specific Accessories - Field Replacement of Standard Latches
Enclosure Specific Accessories - Field Replacement of Standard Latches J Series - JLL150KIT NLL150WTKIT SSLKIT Control / N Series NLL150KIT Field Replacement of Standard Latches FIELD REPLACEMENT OF USED
Uses, Certifications, and Standards Electrical Control and Instruments, Indoor/Outdoor EXTERNAL FEET, WALL standard UL 508, CSA C22.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 121264CHC Encl 12X12X6 N4 Enclosure Cooper B-Line/Cable Tray Catalog Number Manufacturer escription Weight per unit Product
Panel Size. Conductive
Spec-00402 ULTRX, Type 4X INDUSTRY STANDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E697 cul Listed per CSA C22.2
Type 4X Panel Enclosures
Type 4 s Type 4 s Type 4 Single-Door Data and Illustration Sheet Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
Technical Data. Windy Boy 6000US. Windy Boy 5000US. Windy Boy 7000US
36 37 Technical Data Certified to the new UL 7/ IEEE 57 5-year limited warranty standard CEC efficiency of up to 96 % Sealed electronics enclosure and OptiCool Comprehensive SMA communications and data
Electric Actuator Instructions
BAC IOM Electric Actuator Instructions E024, E025, E026, E029 & E030 TABLE OF CONTENTS Electric Actuator Specifications...2 Overview...3 Actuator Wiring Diagrams...4 VMS-35 Specifications and Wiring Diagram...5
PDA2300. Economical Plastic NEMA 4X Enclosures for 1/8 DIN Digital Panel Meters FEATURES OVERVIEW
PDA2300 Economical Plastic NEMA 4X Enclosures for 1/8 DIN Digital Panel Meters Download free 3-D CAD files of these enclosures to simplify your drawings! predig.com/documentation-cad PDA2301 Enclosure
Steel Enclosures Contents
Contents 12/001 - Type S1GK and GK/SD steel enclosures for industrial control use Type CS and GKP steel enclosures for standard starters Page 12/002 12/002 Type S3GK and GK/DW weatherproof steel enclosures
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight
JUNCTION BOXES AND SUNSHADES
JUNCTION BOXES AND SUNSHADES Description The SITES S.r.l. enclosure system winterizes process instruments and protects them from corrosion and mechanical abuse. A full range of enclosures sizes are available
Phoenix Thermal Supply
Connection Heads, Blocks, Nipples, and Springs Hinged Heads - Flip Top Hinged Heads and Blocks Nema 4 Rated Flip-Top Design for Easy Access and Closure Hinge Pins and Latches of Stainless Steel Silicone
DA-053 Series. Overview. Applications. Features & Benefits. Datasheet. 53lb-in (6 Nm), Non-Spring Return Damper Actuators
Datasheet 53lb-in (6 Nm), Non-Spring Return Damper Actuators Overview The direct-coupled fail-safe/failin-place electronic actuators are designed for modulating, two position, and floating control of laboratory
Phoenix Thermal Supply
Connection Heads, Blocks, Nipples, and Springs Hinged Heads - Flip Top Hinged Heads and Blocks Nema 4 Rated Flip-Top Design for Easy Access and Closure Hinge Pins and Latches of Stainless Steel Silicone
EDS / EFS Series Control Stations
EDS / EFS Series Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures are installed
FREE-STANDING ENCLOSURE ACCESSORIES FREE-STANDING ENCLOSURE ACCESSORIES. Swing-Out Panels. Panels (Full & Half Length) For Single-Door Enclosures
118 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 11 ENCLOSURE Panels (Full & Half Length) For Single-Door Enclosures Panels for single-door enclosures can
Spec Tech Industrial Electric Control Enclosures
Control Enclosures N Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
Instrument Enclosure Assemblies
Instrument Enclosure Assemblies Standard instrument enclosure Instrument enclosures offer a simple solution for the customer who doesn t have the time to install Signet meters into panels. Whether it s
Features and Benefits
8X6X4 premium line ECO FRIENDLY MADE IN THE USA Premium Polycarbonate Enclosure Features and Benefits 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel
MHD2/MHDO SERIES MHD2. Marine Heavy Duty Outdoor Non-Metallic Fluorescent CLASS 1 DIVISION 2 FLUORESCENT LIGHT
MHD2/MHDO SERIES Marine Heavy Duty Outdoor Non-Metallic Fluorescent Non-metallic, glass reinforced polyester housing. 3/4 in. NPT aluminum hub. Captive stainless steel latches. Stainless steel mounting
Solar Combiner Solutions
Solar Combiner Solutions Providing combiners and disconnects that offer superior resistance and durability from harsh weather and abusive solar environments Solar Technology Leading the way in Solar Technology
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
Control Enclosures. Type 1, 3, 3R, 4X, 12 as designated. Type 1, 3, 3R, 4X, 12 as designated WT, HWT, FHLWT
Control Enclosures Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
Technomad PowerChiton Application Guide
Technomad PowerChiton Application Guide Today s audio consumer expects high quality audio in any environment and for any application. With the PowerChiton weatherproof amplifier series, Technomad has introduced
Polyline Polycarbonate Enclosures
TM Polyline Polycarbonate Enclosures Authorized Distributor: From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications WESCHLER INSTRUMENTS 800-903-9870
Door available front and rear
Features - The range consists of nine cabinets, ranging from 20" x 30" to 50" x 40". - Cabinet is self-extinguishing, hot molded halogen-free fiberglass reinforced polyester. - Gray dyed in mass (RAL 7036)
EDS / EFS Series Control Stations
EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. &, Groups B*, C, D Cl. II, Div., Groups E, F, G Cl. II, Div., Groups F, G NEMA, 7B*CD, 9EFG Applications:
Hazardous Factory Sealed Control Devices
Hazardous Factory Sealed Control Devices Description Page No. Application/Selection 428, 429 Dimensions 40 Manual Motor Starting Switches & Enclosures EDS Series 440, 44 Pilot Lights EFS Series 45 Pilot
MHD2/MHDO SERIES M H D 2. Marine Heavy Duty Non-Metallic Fluorescent
MHD2/MHDO SERIES Marine Heavy Duty Non-Metallic Fluorescent Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844 Hazardous Locations
Electric Actuated Butterfly Valves Ductile Iron Wafer Body ASME 150# 2 to 6 Pipe
2 to 6 Pipe Features Direct mount wafer butterfly valve with ISO5211 mount 3-layer epoxy coated ductile iron body with 316 SS disc Unique wave line seat reduces torque and extends seal life Visual valve
Standard Product Low Profile Type 12 One-Door Disconnect Enclosures
763.422.2600 Spec-00005 M763.422.2211 Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Low-Profile, One- to Five-Door
Cover more applications with the most versatile Weatherproof Covers on the market
Cover more applications with the most versatile Weatherproof Covers on the market Intermatic.com Our durable line-up of Die-cast and Plastic Weatherproof Covers offers long-lasting protection in all types
Series Village Lane Easley, SC Ph: (864) Fax: (864) Worm and Spur Gear Electric Actuators
Series 30 127 Village Lane Easley, SC 29642 Ph: (864) 605-0150 Fax: (864) 605-0830 www.tru-flo.com Worm and Spur Gear Electric Actuators External Position Indicator Indicator engages directly with drive
ACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE
ACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE hvgrid-tech designs and manufactures high voltage cable accessories for all types of cable systems, ranging from 69 kv to
NC State University Design and Construction Guidelines Division 23 Energy Management
1.1 Purpose A. The following guidelines provide the methodology and requirements to assure that designs meet NC State standards for campus utility metering. 2.1 General Requirements A. Meters shall have
GRANITE ENCLOSURES MODEL NO. NPS Standard Features
MODEL NO. NPS-6-- --0666 Standard Features CSA and NEMA 3R (UL50) 1800 Amps @ 24Volt / 900 Amp @ 48Volt back up power Solid steel frame and shelf construction with 2 high sub-frame platform. Available
Residential Transition Box. Model RU-1. Specifications. Electrical
Residential Transition Box Model RU-1 Model RU-1 transition box provides a quick, simple, and easy transition between a microinverter trunk cable and stranded wire. Using only a single flathead screwdriver,
Pauluhn ZPL explosionproof LED luminaires For drilling and marine applications
Pauluhn ZPL explosionproof linear LEDs are designed to replace fluorescent T12, T8 and T5HO lighting on marine vessels and land-based and offshore drilling platforms. The rugged and durable design features
www.greenelectricalsupply.com Dimensions not to scale 4.4 Width 6.75 ; with latches 7.33 2 ; 27.68 4 ; 51.65 8 ; 100 Lengths, nominal; actual AVAILABLE Simkar is proud to offer fixtures that comply to
SPECIAL SPECIFICATION 8676 Solar Panel Power Supply System
2004 Specifications CSJ 2552-01-033 SPECIAL SPECIFICATION 8676 Solar Panel Power Supply System 1. Description. This work shall consist of furnishing and installing an integrated Solar Panel Power Supply
Arktite Heavy Duty Circuit Breaking Plugs and Connectors
Arktite Heavy Duty Circuit Breaking Plugs and Connectors 60 A, 600 VAC/250 VDC, 50**-400 hertz Dimensions Page 968 1P Plug Connector Mating APJ Plugs Mating APR Connectors Style 1 Description Cat. # Dia.
ARIA Series configuration options and specifications
Series configuration options and specifications AN Opaque Cover Enclosures (AN) 80 Bonded Window Enclosures (ANB) 82 * Prefix AN: Flat opaque cover ANB: Flat cover with bonded window ANG: Flat cover with
Networking: Wall-Mount Cabinets PROTEK Wall-Mount and Double-Hinge Cabinets PROTEK Single-Door Fan and Filter Thermal Packages, UL and NEMA Type 1
PROTEK Single-Door Fan and Filter Thermal Packages, UL and NEMA Type 1 Industry Standards UL 508A Listed; Type 1; File Number E619967 cul Listed per CSA C22.2 No. 9; Type 1; File Number E61997 NEMA / EEMAC:
EDS / EFS Series Control Stations
EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures
accessory guide Indoor AP Accessories Compatible Products Description Picture Kit Contents
Indoor AP Compatible Products Description Picture Kit Contents 902-0100-0000 ZoneFlex 7982 ZoneFlex R700 Multipurpose mounting bracket for 7982 supports mounting to hard wall, ceiling, electrical outlet
ELECTRIC ACTUATOR HVAC/BAC ELECTRIC IOM. E024, EO25, E026, EO29 & E030 Installation Operation and Maintenance Instructions TABLE OF CONTENTS
HVAC/BAC ELECTRIC IOM ELECTRIC ACTUATOR E024, EO25, E026, EO29 & E030 Installation Operation and Maintenance Instructions TABLE OF CONTENTS Electric Actuator Specifications... 2 Overview... 3 Actuator
Temperature Transmitters
Termination BAPI recommends using twisted pair of at least 22AWG and sealant filled connectors for all wire connections. Larger gauge wire may be required for long runs. All wiring must comply with the
Wall-Mount Enclosures CONCEPT Wall-Mount Enclosures
Spec-00286 H763.422.2211 763.422.2600 Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures, Type 4 and 12 INDUSTRY STANDARDS Wall-mounting brackets required to maintain
Confidence with the global standard in pressure relief devices
QUALITROL LPRD Large pressure relief devices Confidence with the global standard in pressure relief devices Robust design and materials provide reliable protection and long life Widest array of options
Benefits. Safety. Durability. Performance. Russellstoll. Heavy Industrial/ Marine
eavy Industrial/ Marine Benefits builds a variety of benefits into one plug, receptacle and interlock system for your application. Safety Waterproof construction: standard neoprene O ringed interior components
MP Meter-Pak Meter Centers
Catalog 4141CT0701 2008 Class 4141 MP44125 MP86200 CONTENTS Description..............................................Page Product Description........................................... 2 General and Application
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse-SS Power Pedestals
Lighthouse-SS Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 9.565" (242.95 mm) Depth: 9.875" (250.83 mm) Lighthouse-SS Base Diagram Ø0.50" MOUNTING HOLE (TYP.) 9.5625" 8.0625" 7.3125" C:\Documents
Electric Actuated Butterfly Valves Ductile Iron Lug Body ASME 150# 2 to 6 Pipe
2 to 6 Pipe Features Direct mount lug butterfly valve with ISO5211 mount 3-layer epoxy coated ductile iron body with 316 SS disc Unique wave line seat reduces torque and extends seal life Visual valve
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse Power Pedestal
DRILL \ PUNCH OUT TO SIZE REQUIRED DRILL \ PUNCH OUT TO SIZE REQUIRED Lighthouse Power Pedestal - Specifications Lighthouse Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 13.67" (347.22 mm)
Example: DWAE51L840-4-UNV-MD360W. Lumen Package Color Temp. Length Voltage Driver Options Installed
Industrial Vaporlume DW Project: Location: Cat.No: Type: Lamps: Notes: Qty: 4', wet location, 3500, 4300, 5100 or 7000 lm The Philips Day-Brite / Philips CFI Vaporlume wet location industrial DW is designed
Deluxe Charging Carts, Wireless Charging System
UCCSW Series Product Data Sheet Deluxe Charging Carts, Wireless Charging System Faster IT Deployments Carts arrive in weeks rather than months. No wiring needed. GDS Wireless Technology eliminates power
Taxonomies, Classifications, and Categories CIRCUIT BREAKING, COMPRESSOR, CONVEYOR, MOTOR GENERATOR SET, POLARIZED, WELDER
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AP20467S22 3W-4P 200A Plug Cooper Crouse-Hinds Catalog Number AP20467S22 Manufacturer Cooper Crouse-Hinds Description
Operator System Enclosures
27 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 Operator Systems are designed to house a wide variety of equipment; panel mount, rack mount, desktop PC s, monitors,
ARIA Series configuration options and specifications
Vynckier Enclosure Systems 271 McCarty St., Houston, Texas 77029 Phone: (713) 374-7850 Toll Free: (888) 837-1114 Fax: (800) 444-1261 www.vynckier.com ARIA Series configuration options and specifications
SEN and SEN Outdoor Air Temperature Sensors
FANs 216, 1628.3 Product/Technical Bulletin SEN-500-2, SEN-500-3 Issue Date 0996 SEN-500-2 and SEN-500-3 Outdoor Air Temperature Sensors The SEN-500-2 and SEN-500-3 Outdoor Air Temperature Sensors offer
[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]
![[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]](/thumbs/95/124192199.jpg "[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]")
[ SOLUTIONS FOR AUTOMATION & ONTROL DEVIES: ] INDUSTRY STANDARDS Solid hinged cover models. Mounting brackets required to meet UL/SA external mounting requirements. FEATURES remove and -install hinge pins
NETXTEND FLEX SERIES Equipment Enclosures
NETXTEND FLEX SERIES Equipment Enclosures NETXTEND FLEX SERIES FEATURES & BENEFITS yfull flexibility and scalability one enclosure for various wireless and wireline telecom applications ymultiple climate
BECSys CO 2 Feeder. BECSys CO 2 Feed System Data Sheet. Description. Features
Description BECSys CO 2 Feed Systems provide a rugged and reliable solution to ph control in aquatics facilities. CO 2 is recognized as a safe and easy-to-use method for ph control. BECSys CO 2 Feeder
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
Remote Power Solutions
Remote Power Solutions A clean, affordable, renewable solution that gives you reliable, 24/7 power for all types of equipment in any environment. Many different voltage & output options available. Weatherproof
Panelboard Protection on a Global Scale
Panelboard Protection on a Global Scale Appleton Panelboards Brochure Selection guide. No matter what environment, location or power requirement, our panelboards have your facility covered. From a petrochemical
Type 4X Panel Enclosures
Type 4X Lift-Off Cover ata Sheet Seamless, poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
M Valve Actuator Weather Shield Kit
34-636- 2235, Rev. C M9000-341 Valve Actuator Weather Shield Kit Installation Instructions Part No. 34-636-2235, Rev. C Issued March 2016 Applications The M9000-341 Weather Shield Kit is a cost-effective
R49 SERIES TABLE OF CONTENTS
PRODUCT GUIDE R49 SERIES TABLE OF CONTENTS 3 Product Overview 4 Features Spotlight 5 Code Logic 6 Panel Mount Receptacle Female 7 Panel Mount Receptacle Male 8 Cable Mount Receptacle 9 Bulkhead Mount Receptacle
CHAPTER4 Wall-Mount Cabinets
: CHAPTER Wall-Mount Cabinets Protect your electronics investment with space-saving solutions from Pentair Technical Products Hoffman brand. In schools, factories, retail outlets and government centers
EB SERIES INSTRUMENT ENCLOSURES
EB SERIES INSTRUMENT ENCLOSURES EB Series Instrument Enclosures 1 5 2 7 4 6 Multiple-fold 1 gutter type edge provides extra stability and protects against dirt and water when enclosure is opened. Grounding
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas
1P Arktite Heavy Duty Circuit Breaking s and s Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically operated
Multilink s Family of Wall Mount Enclosures
Multilink s Family of Wall Mount Enclosures The Multilink family of wall mounted optical termination enclosures are designed to provide solutions for both the interconnection of patch cabling and a combination
ELECTRIC ACTUATOR 94OE IOM. E024, EO25, E026, EO29 & E030 Installation Operation and Maintenance Instructions TABLE OF CONTENTS
ELECTRIC ACTUATOR E024, EO25, E026, EO29 & E030 Installation Operation and Maintenance Instructions TABLE OF CONTENTS 94OE IOM Electric Actuator Specifications...2 Overview...3 Actuator Wiring Diagrams...4
NEMA 1 and NEMA 4 Metal & Plastic Enclosures
s Plastic Metal NEMA 1 and NEMA 4 Metal & Plastic s All enclosures are NEMA 1 or NEMA 4 rated and are UL Listed. Smaller enclosures have an abundance of knockouts and metal enclosures are stackable vertically
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDSC210 -Way Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type Contact Configuration Current Rating Voltage Rating Material, Color, and
Standards IEC IEC 529 Rated IP66-9 EN EN Mounting frame: removable predrilled reinforced DIN-rails
Features - The range is available in seven sizes, ranging from 12" x 8" to 40" x 32". - The cabinets are made of beige (RL 7032) hot molded fiberglass reinforced polyester, dyed in mass. The enclosure
Unshrouded 60, 100 and 200 Watts Shrouded 60, 100 and 200 Watts
THERMOELECTRIC COOLERS INDOOR/OUTDOOR Unshrouded 60, 100 and 200 Watts INDUSTRY STANDARDS Shrouded 60, 100 and 200 Watts ; Type 12, 3R, 4, 4X; File No. SA6453 IP 65 APPLICATION Thermoelectric Coolers minimize
CEILING AIR INLETS CORROSION PROOF ECONOMICAL DURABLE. Ideal for all Agricultural applications.
CEILING AIR INLETS CORROSION PROOF ECONOMICAL DURABLE Ideal for all Agricultural applications. These durable ceiling inlets are rotational moulded with high impact polyethylene. They are designed to offer
TS-350 Fully-Flush Under Vehicle Inspection Light Packages
General Description The flush-mounted fixture is designed to aid security and safety inspectors by providing high-intensity illumination of vehicle undercarriages. Features include outstanding durability,