Fiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006
|
|
|
- Alexander McDonald
- 6 years ago
- Views:
Transcription
1 ROSE+BOPLA ENCLOSURES A PHOENIX MECANO COMPANY Fiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006 Dimensional Drawings
2 All sizes are available with an optional clear viewing lid. The clear polycarbonate lid version makes an ideal outdoor meter housing. All meters, LED readouts, and adjusting knobs can be mounted right under the lid with the optional aluminum display panel faceplate mounted on stud bolt posts. Optional internal hinges/lid screws can replace the standard lid screws and quickly turn these enclosures into wall-mounted indoor/outdoor cabinets with doors. TECHNICAL DATA: Color: Gray similar to RAL 7032, or Transparent Lid. Material: Enclosure. Glass-fiber reinforced polyester. Transparent Lid, Polycarbonate Surface resistance: Enclosure, >10 12 Ohm/VDE 0303 Transparent Lid, >10 15 Ohm, DIN Impact Resistance: >7Nm, EN Flammability: Enclosure, Self-extinguishing, UL 94 V0. Transparent Lid, UL 94 V2 Gasket Temperature Range: Neoprene Foam Gasket 40 F to +212 F Polyurethane Foam Gasket 40 F to +194 F Silicone Foam Gasket 76 F to +266 F Disruptive Strength: Enclosure, 18KV/mm / VDE 0303 Transparent Lid, >30KV/mm / VDE 0303 Captive 3/4 Turn Lid Screws. Toxicity: Halogen Free. Protection Classifications: NEMA Types: up to Nema 12 IP 65, EN Approvals: Maritime Register of Shipping # Rose+Bopla s Fiberglass Modular Flange System consists of three different enclosures that can be used as stand alone units or can be quickly bolted together with connecting tunnel flanges Fiberglass Modular Flange and wedges. This fast system of joining enclosures together not only guarantees a watertight seal, but also offers greatly expanded internal component mounting space. The length and width dimensions are expandable by adding additional enclosures. These 3 expandable systems offer all the advantages of molded products: clean design, tight tolerances, consistent dimensions, strength, low cost and resistance to weather and industrial corrosion. They also offer what is not normally available with molded products: expansion capability. All units are made from compression-molded fiberglass mats that are UV stabilized. This system offers strength, ruggedness and weather/corrosion resistance, unmatched by metal enclosures. The rugged compression molded plastic will not give off toxic halogenated gases when burned. This makes these units ideal for areas where strict fire codes limit the use of plastic cases in harsh manufacturing high fire hazard areas. These fiberglass modular enclosures are ideal for electrical junction boxes in caustic petro-chemical plants or electroplating plants. Rose+Bopla s fiberglass modular enclosures have also been used to house car wash controls and as outdoor postmounted railroad signal control boxes. These units can be used alone as individual control or junction boxes, or can be snapped together quickly to create an expandable, wall-mounted, outdoor, electrical control center. These modular enclosures are ideal for outdoor use, as they are impervious to sun, rain, sleet, ice and acid rain. These boxes will outlast any metal unit outdoors. Each enclosure includes compression molded lid and base, non-reinforced fiberglass (POCAN) 3/4 turn lid screws and a nonremovable polyurethane gasket. Flanges, connecting tunnels, hinges, mounting plates (mounting plate drawings, on page 17-48), etc., are options and must be ordered separately. (Flange wedges are included with flanges). Optional pre-threaded flanges have molded-in knockouts, which are easily removed with a screwdriver. This exposes the molded-in threads designed for Rose+Bopla s fiberglass watertight cable grips. The grips are threaded and offer a watertight power cable entry/exit in seconds. The optional blank flange can be machined to fit any connector requirements, or unmachined, can be used to fill flange openings. Wall mounting holes are molded into each box. The lid must be removed to wall mount with this method. Optional external wall mounting brackets can be bolted onto the rear of the box. The lid does not have to be removed when using external wallmount brackets. 1-10
3 ROSE+BOPLA ENCLOSURES A PHOENIX MECANO COMPANY Fiberglass Watertight Modular Flange System 1401: The 1401 model is the smallest of the units. This unit has two removable side flanges that allow rapid installation of electrical power cables with various Rose+Bopla flanges available. 270mm/10.63" L x 170mm/6.69" W x 135mm/5.31" H, Opaque Lid 270mm/10.63" L x 170mm/6.69" W x 150mm/5.91" H, Clear Lid 1402: This is the intermediate size of the Rose+Bopla Fiberglass Modular Flange Units. Two 1402 units make one 1403 unit. This unit is square and has four removable flanges, which allow for the rapid installation of electrical power cables with various Rose+Bopla flanges available. 270mm/10.63" L x 270mm/10.63" W x 135mm/5.31" H, Opaque Lid 270mm/10.63" L x 270mm/10.63" W x 150mm/5.91" H, Clear Lid 1403: The largest of the Rose+Bopla Fiberglass Modular Flange Units with six removable flanges, the 1403 offers unrestricted access on all sides when installing electrical power cables. This model is exactly twice the size of the 1402 model. It can be used as a standalone unit or connected to other units for expanded internal mounting space. 540mm/21.26" L x 270mm/10.63" W x 135mm/5.31" H, Opaque Lid 540mm/21.26" L x 270mm/10.63" W x 150mm/5.91" H, Clear Lid Part Number Description Box without Flanges/Opaque Lid* Box without Flanges/Clear Lid* Box without Flanges/Opaque Lid* Box without Flanges/Clear Lid* Box without Flanges/Opaque Lid* Box without Flanges/Clear Lid* Fiberglass Watertight Modular Flange System Flange Openings Length (Inches/mm) / / 540 Width (Inches/mm) 6.69 / / 170 Height (Inches/mm) 5.31 / / / / / / 150 Weight 3.73 lbs 3.73 lbs 4.19 lbs 4.19 lbs 7.93 lbs 7.93 lbs Note: Dimensions are external. Metric is the primary dimension. Inch conversions and weights are for the user s convenience and are for reference only. *Flanges and Flange wedges sold separately. See dimensional drawings. Accessoires show on drawing pages. Drawing Page #
4 Fiberglass Watertight Modular Flange System Fiberglass Reinforced Lid Screws Compression Molded Lid Compression Molded Base Flange Wedge Pre-Threaded Flange Part Number Fiberglass Watertight Modular Flanges Flange Description Blank Flange Pre-Threaded Flange with wedges Pre-Threaded Flange with wedges Pre-Threaded Flange with wedges Pre-Threaded Flange Connecting Tunnel Flange Note: Flanges must be ordered separately. Cable Grip Holes Qty Size M M25 4 M 32 2 M 40 1 M M Fiberglass Modular Flange 1400 with Clear Lid Fiberglass Modular Flange 1400 Threaded Flange 1-12
5 Fiberglass Flange ROSE+BOPLA ENCLOSURES A PHOENIX MECANO COMPANY 1401 External Dimensions: L 270 x W 170 x H 135 mm Page 1-11 Standard Features ¾ turn Pocan lid screws M6x10 Copper ground screws. Non-Removable foamed-in Polyurethane gasket. Accessories Terminal Rails (TS 35) Grounding Strip External Wall Mounting Brackets (Set of 4) Internal Hinges (Set of 2) Threaded Inserts (Set of 10) 1402 External Dimensions: L 270 x W 270 x H 135 mm Page 1-11 Standard Features ¾ turn Pocan lid screws M6x10 Copper ground screws. Non-Removable foamed-in Polyurethane gasket. Accessories Terminal Block Rails Grounding Strip External Wall Mounting Brackets (Set of 4) Internal Hinges (Set of 2) Threaded Inserts (Set of 10). Dimensional Drawings
6 Fiberglass Flange 1403 External Dimensions: L 540 x W 270 x H 135 mm Page 1-11 Standard Features ¾ turn Pocan lid screws M6x10 Copper ground screws. Non-Removable foamed-in Polyurethane gasket. Accessories Terminal Rails Grounding Strip with screws External Wall Mounting Brackets (Set of 4) Internal Hinges (Set of 2) Threaded Inserts (Set of 10) (M6) Mounting Plates Page 1-11 Mounting Plates Internal phenolic mounting plate with screws for 1401 series Internal phenolic mounting plate with screws for 1402 series Internal phenolic mounting plate with screws for 1403 series Aluminum Display Panel with hardware for 1401 series Aluminum Display Panel with hardware for 1402 series Aluminum Display Panel with hardware for 1403 series Rose_Industrial_Enclosures_Fiberglass_Modular_Flange_en_1111.pdf Helsinki tel automation@klinkmann.fi St. Petersburg tel klinkmann@klinkmann.spb.ru Moscow tel moscow@klinkmann.spb.ru Yekaterinburg tel yekaterinburg@klinkmann.spb.ru Samara tel samara@klinkmann.spb.ru Кiev tel klinkmann@klinkmann.kiev.ua Riga tel klinkmann@klinkmann.lv Vilnius tel post@klinkmann.lt Tallinn tel klinkmann.est@klinkmann.ee Мinsk tel minsk@klinkmann.com
Polymas Watertight PK Enclosures Product Drawings Last Updated 6/18/2008
A PHOENIX MECANO COMPANY PK Enclosures Product Drawings Last Updated 6/18/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 www.rose-bopla.com rbinfo@pm-usa.com Dimensional Drawings For
ECO/PCI Compact Enclosures Product Drawings Last Updated 6/19/2008
ROSE+BOPLA ENCLOSURES A PHOENIX MECANO COMPANY ECO/PCI Compact Enclosures Product Drawings Last Updated 6/19/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 www.rose-bopla.com rbinfo@pm-usa.com
CS COMPACT ENCLOSURE. CABINETS. method for lifting uses the same eyebolts as ATB8 cabinets. optional 180 hinges available
CS COMPACT ENCLOSURE method for lifting uses the same eyebolts as ATB8 cabinets optional 180 hinges available CS enclosures can be wall-mounted using standard SDWC-010 mounting brackets as used on ST Box
ATB8 MONOBLOC CABINET
ATB8 MONOBLOC CABINET finishing profile frame, roof and sidewall are one integral piece removable back mounting plate included in the supply closing system with: 3 points for H=1600, 4 points for H=1800-2000,
Polycarbonate Watertight 03 Product Drawings Last Updated 6/18/2008
ROSE+BOPL PHOENIX MECNO COMPNY Polycarbonate Watertight 03 Product Drawings Last Updated 6/18/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 301-696-9800 www.rose-bopla.com rbinfo@pm-usa.com
Polymas Watertight PK Enclosures Product Drawings Last Updated 1/6/2006
PHOENIX MECNO COMPNY PK Enclosures Product Drawings Last Updated 1/6/2006 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 301-696-9800 www.rose-bopla.com customerservice@rose-bopla.com For
Mobile Control Units 2930, 2940, 2950 Handheld Enclosures Product Drawings Last Updated 6/20/2008
Mobile Control Units 2930, 2940, 2950 Handheld Enclosures Product Drawings Last Updated 6/20/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 301-696-9800 www.rose-bopla.com rbinfo@pm-usa.com
BOXES SOLUTIONS. BOXES
BOXES SOLUTIONS - wide range of dimensions: over 40 enclosures with blank door, 19 models with glazed door, enclosures with single blank door, double door with rod system and enclosure with single glazed
cabinets and equipment Atlantic, Atlantic stainless steel, Marina
cabinets and equipment Atlantic, Atlantic stainless steel, Marina EXTERNAL DIMENSIONS D ATLANTIC CABINETS (p. 276) MARINA CABINETS (p. 286) METAL IK 10 STAINLESS STEEL IP 66-IK 10 POLYESTER - IP 66 - IK
ETA quality, promptly
ETA quality, promptly E MOX - THE PRODUCT PHILOSOPHY E MOX is E.T.A. quality, promptly E.T.A. introduces E MOX, the new range of monobloc enclosure solutions proposed as the effective combination of strength
Bulletin 140U R-Frame Molded Case Circuit Breakers
R-Frame Molded Case Circuit Breakers Selection Guide Product Selection Product Selection 2500 A, R-Frame UL 489 Note: Terminal box lugs must be ordered separately. CSA 22.2, No. 5 IEC 60947-2 CE KEMA-KEUR
Switch disconnectors and fuse switch disconnectors
Switch disconnectors and fuse switch disconnectors Technology QUADRON CrossLinkBreaker Secures and disconnects currents up to 100A Sizes 000 to 2 can be mounted quickly on DIN EN 50 022 rails using the
Panel-mounting components
Quality Panel-mounting components For conventional cabling, Wöhner offers a comprehensive range of panel components suitable for either plate or DIN-rail mounting. Fuses and the associated connection technology
PLIO -GRAINS cable ties
PLIO -GRAINS cable ties PA & PE black & PLIO -GRAINS PLIO-GRAINS - PA cable ties in polyamide black for outdoor use and for indoor use -20 to +85 C maximum tensile length bundle Ø strength type number
DC Loop Contactors, Contactor Lugs and Dynamic Brakes Technical Data
DC Loop Contactors, Contactor Lugs and Dynamic Brakes Technical Data Table of Contents 1370 DC Loop Contactors....................................3 Catalog Number Explanation...............................3
SWITCH DISCONNECTORS PLANET -SWITCH.
SWITCH DISCONNECTORS 6A to 600A ratings Versions: direct operating handle, door coupling and in housing Wide range of accessories Types for photovoltaic applications up to 50A. PLANET -SWITCH SEC. PAGE
Proximity Sensors and Limit Switches
Proximity Sensors and Limit Switches Time-tested, Robust and Reliable Control 6 / 2011 INDUCTIVE SENSOR PRODUCT SPOTLIGHT Allen-Bradley proximity sensors set the standard for ruggedness, reliability and
Heavy Duty. this page Page 4-16 Page 4-19 Page Mounting Clamp. 8 ArmorBlock MaXum. 9 Standard Cordsets. 10 DeviceNet Photoelectric
Bulletin 45, 55 Product Line Overview NetTM Media Bulletin 45 Type Product Selection NetTM Flat Media System KwikLinkTM General Purpose NetTM Flat Media System KwikLinkTM Heavy Duty 6 / 20 NetTM Round
7E x0. Nominal current 5 A (32 A Maximum) 1-phase 230 V AC 17.5 mm wide
Features 7E.23.8.230.00x0 kwh Energy meter 1-phase with multi-functional LC-Display Type 7E.23 5(32) - 1 module wide Complies with EN 62053-21 and EN 50470 Display indicates total consumption, partial
RESIDENTIAL BUILDINGS & HOTEL EQUIPMENT
RESIDENTIAL BUILDINGS & HOTEL EQUIPMENT Plexo flush-mounting complete IP 55 Plexo surface-mounting complete IP 55 Plexo mechanisms IP 55 for flush or surface-mounting Plexo surface-mounting boxes and support
Approvals (p. 906) 0 371 61 0 371 63 0 371 64 0 371 66 0 371 69 0 371 68 0 371 00 0 371 08 0 371 20 Connecting (p. 300) 1 connection - 1 entry/1 outlet ELECTRICAL FUNCTION TERMINAL BLOCKS INSULATION EQUIPOTENTIAL
Din rail power supplies
www.klinkmann.com Din rail power supplies Short form 2011-2012 EDITION A wide range of power supplies All the power you need in your hand The current production of Cabur DIN RAIL power supplies is the
Get detailed information on many digital or printed supports, or contact your Area Commercial Manager
The RX 3 and DX-E ranges provide essential functions for the protection requirements of people and property in residential and small commercial buildings Two breaking capacities, 4500 and 6000 (IEC 60898-1)
Starfix TM ferrules and crimping tools
Starfix ferrules and crimping tool 3 wire marking Nylbloc auto screwless mounting connectors Nylbloc screw terminal strips Starfix TM ferrules and crimping tools 376 50 376 66 376 77 377 64 376 87 376
Size for Size Best Value in the Industry
Size for Size Best Value in the Industry Overview for SMC -Flex and SMC -3 Soft ers 3...480A 200-460VAC...500-575VAC www.klinkmann.com Allen-Bradley Smart Motor Controllers... Providing Unmatched Intelligent
Bulletin 194L 194E 194E
Bulletin 19C, 19L, 19E Product Line Overview Switch Selection / 211 Type Features ctuators Bulletin 19L 19E 19E Open Switch or Enclosed UL/CS El. Ratings Rated Voltage U e [V C] Control and Load Switches,
14x12x7 Inch 48 VDC (PoE) Power-Over-Ethernet Powered, Weatherproof & Insulated with Heating System - Model: NB H0N
14x12x7 Inch 48 VDC (PoE) Power-Over-Ethernet Powered, Weatherproof & Insulated with Heating System - Model: NB141207-4H0N Applications and Features Features: Molded Fiberglass Reinforced Polyester (FRP)
Phone: Fax: Web: -
empire SERIES For your largest applications, turn to the Empire Series from Allied Moulded. Fiberglass construction offers durability and strength without the excessive weight of a comparable metal enclosure.
JUNCTION BOXES AND SUNSHADES
JUNCTION BOXES AND SUNSHADES Description The SITES S.r.l. enclosure system winterizes process instruments and protects them from corrosion and mechanical abuse. A full range of enclosures sizes are available
The TeleControl Series Technical Drawings
The TeleControl Series Technical Drawings TeleControl TeleControl Enclosures Dimensions SIZE ID NUMBER OVERALL H X W X D INSIDE A X B X C E X F J K L M N HOLE DIA. SHIPPING WEIGHT PANEL NUMBER J1407TC
Empty enclosures IEC 62208
374 www.hensel-electric.de/en in accordance with for customized solutions and individual applications for example for low-voltage switchgear and controlgear assemblies i n accordance with the IEC 61439-series
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes p Versatile, lightweight & durable p Choice of materials: polycarbonate for rugged applications or ABS as an economic alternative p IP protection for outdoor
(p. 47) (p. 155) (p. 155)
0 286 56 + 0 288 02 (p. 47) 0 286 74 + 0 288 02 (p. 155) 0 287 56 + 0 288 02 (p. 155) Dimensions see e-catalogue Elecical characteristics p. 162 Automatic air circuit breakers must be equipped with eleconic
ROSE Systemtechnik GmbH
PRODUCT OVERVIEW 1 ROSE Systemtechnik GmbH The company was founded in 1969 and specializes in the development and production of high quality industrial enclosures, which are used in a variety of environmental
Empower the World with Photovoltaics
www.klinkmann.com Empower the World with Photovoltaics Solutions for photovoltaic power supply - for professional and for housing applications. Schematic Diagram of the Smart Off-Grid Systems (for applications
C13 Various Cable Ties C
C13 Various Cable Ties PLIO -GRAINS cable ties PLIO -GRAINS S H PLIO-GRAINS Material: PA (polyamide 6) PP (polypropylene) Colours: natural - black natural Operating temperatures: -20 to +85 C -20 to +75
BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES
BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES ST WALL-MOUNTING BOXES WITH BLANK DOOR STP WALL-MOUNTING BOXES WITH PLEXI DOOR ST/STP COMPLEMENTARY ACCESSORIES SDV TERMINAL BOXES WITH SCREWED COVER SDF TERMINAL
Time-Tested Durability, Industry Proven A Legacy of Leadership mm 800T/H. 6 /
Time-Tested Durability, Industry Proven A Legacy of Leadership 30.5 mm 800T/H 6 / 2011 IMITATED, BUT NEVER DUPLICATED The Allen-Bradley Bulletin 800T and 800H push button product lines are in a class by
Euromas-Polyester, an enclosure available
Euromas-Polyester 8 Euromas-Polyester, an enclosure available in sizes made of 0% glassbead-reinforced polyester, has been designed to satisfy the highest standards. It makes it possible for the user to
ENYSTAR Load Centers up to 250 A
PASSION FOR POWER. up to 250 A according to IEC 61439-3 for commercial and industrial buildings Download at www.hensel-electric.en made in GERMANY since 1931 up to 250 A according to IEC 61439-3 for commercial
MCBs and RCDs LR TM 6000
MCBs and RCDs LR TM 6000 thermal magnetic MCBs from 6 A to 63 A B and C curves residual current devices from 25 A to 63 A AC and A types ± ± ± ± MCBs Single pole 230/400 V± Single pole neutral 230 V± (1)
Polyester-Enclosures MBP
24 MULTI-BOX Enclosure solutions Polyester-Enclosures MBP Protection class IP 66 MBP-Enclosures correspond with the high requirements of the mechanical engineering, shipbuilding, galvanic and petrochemical
SINGLE DOOR BOXES. PAINT FINISH ETA standard epoxy polyester powder coating. Enclosure and door: colour RAL 7035 textured finish.
ST SINGLE DOOR BOXES Enclosure and door manufactured from 1.5 mm thick sheet steel. Mounting plate manufactured from 2.5 mm thick sendzimir sheet steel. Enclosure and door: colour RAL 7035 textured finish.
EB SERIES INSTRUMENT ENCLOSURES
EB SERIES INSTRUMENT ENCLOSURES EB Series Instrument Enclosures 1 5 2 7 4 6 Multiple-fold 1 gutter type edge provides extra stability and protects against dirt and water when enclosure is opened. Grounding
Catalog / 2016 North American Edition
Catalog 34 2015 / 2016 North American Edition without knockouts without knockouts without knockouts without knockouts PK Polycarbonate Housing Height inches (mm) Packs of 4.3 (110) 4.3 (110) 4.3 (110)
Abox-i Series. petrochemical plants, steel mills and railways.
Series Series (formerly the Nautic Series) junction boxes for harsh environments are supplied complete with terminal blocks. These enclosures can be used wherever extreme conditions are encountered: offshore
AM Series Small Junction Boxes Lift-Off Screw Cover...4
Table of Contents AM Series Small Junction Boxes Lift-Off Screw Cover...4 AM Series Pushbutton Enclosures Inline Lift-Off Screw Cover...4 Multi-Hole Lift-Off Screw Cover...5 Multi-Hole Hinged Screw Cover...5
Control Enclosures. Type 1, 3, 3R, 4X, 12 as designated. Type 1, 3, 3R, 4X, 12 as designated WT, HWT, FHLWT
Control Enclosures Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
Spec Tech Industrial Electric Control Enclosures
Control Enclosures N Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
Polyester enclosures CP series
Polyester enclosures CP series BERNSTEIN polyester enclosures from the CP and CPS series are made of high-quality glass-fibre reinforced polyester. The reduced surface resistance (RO
Carlon. Enclosures. Himeline * Enclosures. HS, HP and HLA/HLS Series Features. Applications. Standards
Himeline * HS, HP and HLA/HLS Series Features High-impact strength High dielectric strength Suitable for indoor and outdoor use Fully gasketed Lightweight Applications Instrument case Junction and terminal
[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]
![[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]](/thumbs/95/124192199.jpg "[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]")
[ SOLUTIONS FOR AUTOMATION & ONTROL DEVIES: ] INDUSTRY STANDARDS Solid hinged cover models. Mounting brackets required to meet UL/SA external mounting requirements. FEATURES remove and -install hinge pins
The DiamondShield Series DS
The DS The was developed for design flexibility and pleasing aesthetics. Applications include high-end electronics, harsh corrosive environments, and industrial applications both indoors and out. Unique
Polycarbonate and ABS enclosures with quick release lid screws CT series
Polycarbonate and s with quick release lid screws CT series The CT series of BERNSTEIN plastic enclosures are made from high-quality Polycarbonate or ABS. They are especially suitable for encapsulating
Phone: Fax: Web: -
control series The larger ontrol Series offers standard features as well as full-panel access and all usable panel space. In addition, the standard grey cover is available with or without a full-length
ROC. IP66 Polyester Double Isolation Boxes. Certificaciones. Technical features
ROC IP66 Polyester Double Isolation Boxes Roc watertight boxes are made of reinforced polyester with fiber glass, insulating material that keeps installed switchgear perfectly isolated. With a protection
Limit, micro and foot switches K series
imit, micro and foot switches K series Prewired limit switches limit switches with high degree of protection, IP67. 2m long wire Axial rotation of operating heads Adjustable and capsizable levers Fixing
Weather Protective Devices
Weather Protective Devices N Industrial Specification Grade Receptacle Covers N-1, N-2 Weather Protective Devices N-3 Power-Lock Receptacles and Flanged Inlets with Weather Protective Lift Lids N-4 50
Standard Product. Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories
Spec-00144 Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories ULTRX WiFi, Type 4X INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cul Listed per CSA C22.2
Wall-Mount Enclosures CONCEPT Wall-Mount Enclosures
Spec-00286 H763.422.2211 763.422.2600 Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures, Type 4 and 12 INDUSTRY STANDARDS Wall-mounting brackets required to maintain
14853 E. Hinsdale Ave. Centennial, CO USA Toll Free: / FAX:
14853 E. Hinsdale Ave. Centennial, CO 80112-4240 USA Toll Free: 800-677-8942 / 303-680-5159 FAX: 303-680-5344 Hensel empty enclosures - the best choice for your electrical installation applications The
Wall-mounting steel enclosures suitable for any CRN and CRNG application
Wall-mounting steel enclosures suitable for any CRN and CRNG application 1 2 3 4 5 6 1 Front rain gutter prevents the entry of water, oil or liquids, ensuring IP66 protection. 10 9 8 7 1/18 2 A complete
New products Ex Equipment 2015
New products Ex Equipment 2015 ROSE Systemtechnik GmbH ROSE Systemtechnik GmbH was founded in Porta Westfalica, Germany, in 199 and is today one of the world s leading and innovative providers of industrial
HelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
Reliable Protection. Simplified Wiring. CI-K enclosure system
CI-K small enclosures www.eaton.eu/ci-k Reliable Protection. Simplified Wiring. CI-K enclosure system The CI-K Enclosure System Reliable Protection. Simplified Wiring. The main job of an enclosure is to
1SLC004001B0202. Enclosures and cable systems overview
1SLC004001B0202 Enclosures and cable systems overview Insulating enclosures and installation material IP40 flushmounting Estetica series IP40 flushmounting Europa series IP40 wallmounting Unibox series
E N V I R O N M E N T A L P R O T E C T I O N F O R Y O U R C O N N E C T I O N S
E N V I R O N M E N T A L P R O T E C T I O N F O R Y O U R C O N N E C T I O N S Controlwell presents a range of Junction Boxes manufactured from Halogen-free ABS, which offers superior resistance to
EPIC. Pin & Sleeve Connectors PIN & SLEEVE CONNECTORS
PIN & SLEEVE CONNECTORS Reference Pin & Sleeve Overview 461 Pin & Sleeve Products Overview 462 CEE series, MULTIMAX series, ULYSSE series, ALUPRES series Pin & Sleeve Construction 464 MULTIMAX Installation
Bocube. Colour: Graphite grey, similar to RAL 7024; light grey, similar to RAL 7035; special colours on request
Bocube Detailed product information can be found on www.bopla.de - Patented, innovative, hinged quick-release catch technology without screws: open with a screwdriver, close by hand - 22 sizes, 132 standard
Wall-Mount Enclosures
Wall-Mount Enclosures Protection When Safety Matters Most When selecting an enclosure, application can be associated with market or product. For example, is your enclosure going to be used in a petrochemical
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles Compatible with UL 1686 C1 Pin & Sleeve Devices Safer. Easier. Better. MENNEKES Non-Metallic MSR Switched and Interlocked
Junction box for EKL light
M EKL light Junction box Junction box for EKL light Features Chemical-resistant Temperature-resistant Flame-retardant Absolutely corrosion-proof Seawater-proof Description Polyester enclosures have proven
Industrial Enclosures
Industrial Enclosures Small enclosures from page 08 Polycarbonate enclosures PK... 0 Cast aluminium enclosures GA... 4 Terminal boxes KL... 6 E-ox E... 9 us enclosures G... 0 RiLAN Industrial IN... 4 Compact
MODULAR FIBERGLASS ENCLOSURE CATALOG D EMAND INNOVATION. NEMA/UL Type 4X
MODULAR FIBERGLASS ENCLOSURE CATALOG D EMAND INNOVATION NEMA/UL Type 4X IBOCO's New Modular Fiberglass Enclosures allow you to THINK OUTSIDE THE BOX WORK THE MODULAR FIBERGLASS ENCLOSURE An innovator in
Panel Size. Conductive
Spec-00402 ULTRX, Type 4X INDUSTRY STANDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E697 cul Listed per CSA C22.2
IEC & UL Standards. EPIC Pin & Sleeve Connectors. Technical Data
Technical Data EPIC IEC & UL Standards Founded in 1906, the International Electrotechnical Commission (IEC) is the global organization that prepares and publishes international standards for all electrical,
Molded-Plastic Distribution Systems
Molded-Plastic Distribution Systems / Introduction ALPHA 8HP molded-plastic distribution systems /8 Empty enclosures / Modular installation devices /4 DIAZED/NEOZED fuse systems /7 NP fuse switch disconnectors
Enclosure Mounting Screws For mounting enclosures through corner holes. Wood Screws
Combination Kits Used to combine series specific enclosures to make larger units. Connect horizontally or vertically. Fitting Type Combination Kit Threaded with locknut seal for connecting sidewalls. Fits
Cable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings
Cable Management Solutions HelaGuard Non-Metallic Conduits and Fittings Table of Contents Page HelaGuard Overview 4 Conduit Application Overview 6 Mounting & Removing HelaGuard Non-Metallic Fittings 7
When to use a Soft Starter or an AC Variable Frequency Drive
White Paper When to use a or an AC Variable Frequency Product lines: Smart Motor Controllers (SMCs), AC Variable Frequency s (VFDs) Topic Page Introduction 2 Starting Methods 3 How does a VFD work? 7 Comparisons
HP Series. Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)
Series The Series are economy junction boxes for lighter duty applications. The 70, 80 and 90 feature snap on covers, while the 100, 150 and 190 feature 4 quick release screws. Enclosures are supplied
Plexo 3 weatherproof cabinets
87045 LIMOGES Cedex Telephone: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 Plexo 3 weatherproof cabinets CONTENTS PAGES 1. Description, use.....1 2. Range, equivalence table...1 3. Overall dimensions...2
STX stainless steel boxes
STX stainless steel boxes Enclosure and door manufactured from AISI 304 stainless steel (AISI 316 on request). Mounting plate manufactured from 2.5mm sendzimir sheet steel. Hinge in stainless steel. Box
Your Source for Automation & Control Components. PREVENTS CONDENSATION with optional air ventilation element
Your Source for Automation & Control Components PREVENTS CONDENSATION with optional air ventilation element Tough Flexible Safe GEOS - Industrial Outdoor Enclosure High quality materials and an innovative
Rittal Small Enclosures
Rittal Small Enclosures Fast and perfect, with an exceptionally diverse range of system accessories R The original is still the best! Packaging technology for the future Whether you require enclosures
Terminal blocks. J - Accessories. Summary. 1. Mounting rails End stops Circuit separators, seperator end sections...
160T001 Terminal blocks - Accessories Summary 1. Mounting rails... 442 2. End stops... 444 3. Circuit separators, seperator end sections... 447 4. umper bars Screw clamp jumper bars... 449 Screwless jumper
PLASTIC BOXES - WIRE DUCTS - DIN RAILS - CABLE TIES
PLASTIC BOXES - WIRE DUCTS - DIN RAILS - CABLE TIES TECNOMATIC CORP. www.tecnomatic.com PLASTIC BOXES TECHNICAL SPECIFICATIONS www.tecnomatic.com Material: ABS thermoplastic, heat resistant to 650 C, with
ACCESSORIES FOR SZE2 CABINETS
ZPAS 143 DOORS Doors Intended for use instead of front solid door or rear panel. Maximum door opening angle: 120 Sheet steel textured powder paint, light grey (RAL 7035), stiffened profiles, brown smoked
Glass Reinforced Polyester Enclosures
42 The GRP range comprises 16 sizes of enclosure manufactured in glass reinforced polyester (GRP). This material is highly resistant to contamination from oils, fats, aliphatic and aromatic carbohydrates,
IP65 enclosures orion plus
IP65 enclosures orion plus One system for indoor and outdoor application Sheet steel or glass reinforced polyester - the orion plus enclosures are suited for harshest conditions and can be applied for
Polyline Polycarbonate Enclosures
TM Polyline Polycarbonate Enclosures Authorized Distributor: From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications WESCHLER INSTRUMENTS 800-903-9870
more power to the cube
more power to the cube Tais Cube designed in GRP thermosetting for tough enclosure applications where space, ingress protection, quick installation and long service life is important. available with blind
POLYLINE Polycarbonate Enclosures. From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications
POLYLINE Polycarbonate Enclosures From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications Table of ontents lick on the information located within
DOMINO Series surface mounting IP55
Series surface mounting IP55 SERIES CONSUMER UNITS SURFACE MOUNTING VERSION - IP55 REFERENCE STANDARDS International standard IEC 60670 (989) and the Modification (994) Part : General requirements for
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
Door available front and rear
Features - The range consists of nine cabinets, ranging from 20" x 30" to 50" x 40". - Cabinet is self-extinguishing, hot molded halogen-free fiberglass reinforced polyester. - Gray dyed in mass (RAL 7036)
YOUR WISH IS OUR COMMAND. Junction boxes. Catalogue-Junction boxes
YOUR WISH IS OUR COMMAND Junction boxes Catalogue-Junction boxes 04 Index Index Hard rubber junction boxes Technical notes Type 1010 Type 1212 Type 1616 Type 1812 Type 2516 Type 1010- Type 2516 Pages 4-8
NexT Range Large sheet steel enclosures
Large sheet steel enclosures 8 Large sheet steel enclosures The NexT Range is the optimum choice for particularly harsh environments. The stainless steel design of the NexT Range can face up to the toughest
UCP polyester. UDP polyester. UCP Accessories. UDP Accessories. General Accessories. Mounting plates. Wall mounting brackets. Locks.
160 POLYESTER ENCLOSURES UCP polyester 164 IP66; NEMA 4, 4X, 12, 13 IK10, IK07 H: 315-1035 W: 215-835 D: 170-300 UDP polyester 170 IP 65, 55; NEMA 4, 4X, 12, 13; IK 10, IK 07 H: 500-1250 W: 500-1250 D:
Flame-retardant PVC offers the protection you need.
Solid wall wiring duct Flame-retardant PVC offers the protection you need. Solid wall duct PVC Engineered to restrict wire access Constructed of flame-retardant PVC Improved flush sidewall and cover style