BOXES SOLUTIONS. BOXES

Size: px

Start display at page:

Download "BOXES SOLUTIONS. BOXES"

Benjamin Roberts
6 years ago
Views:

BOXES SOLUTIONS - wide range of dimensions: over 40 enclosures with blank door, 19 models with glazed door, enclosures with single blank door, double door with rod system and enclosure with single

1 BOXES SOLUTIONS - wide range of dimensions: over 40 enclosures with blank door, 19 models with glazed door, enclosures with single blank door, double door with rod system and enclosure with single glazed door - mounting plate included - main accessories: plinth, internal door kit and modular chassis - optional accessories: micro perforated plates and finned cable entry plates - switch boxes in 5 different versions, with screwed cover, clear cover, for bus system, flanged, with hinged cover - rack enclosures from 3 to 1 units in 450 and 550mm depths. 135 BOXES SOLUTIONS

DELIVERY Box supplied with: - sendzimir rails to be fixed on the door - mounting plate - cable entry plate with sealing gasket - screws for earth connection and mounting accessories.

2 ST SINGLE DOOR BOXES Enclosure and door manufactured from 15/10 sheet steel. Flat mounting plate manufactured from 5/10 sendzimir sheet steel Enclosure and door: colour RAL 7035 textured finish. DELIVERY Box supplied with: - sendzimir rails to be fixed on the door - mounting plate - cable entry plate with sealing gasket - screws for earth connection and mounting accessories. - locking system with Ø 3mm double bar key CONFORMITY AND AROVAL ROTECTION RATINGS - I 66 complying with IEC EN608; EN NEMA 4 complying with UL508A; UL50 - protection degree guaranteed by the two-component polyurethane foam seal (for technical details, refer to page 60) - impact resistance IK10 complying with IEC EN608; EN5010. only for A> ST BOXES

3 ST 00 WIDE ST ST315 BOX DIMENSIONS CABLE ENTRY DOOR SACE MOUNTING LATE DIM. NR B A C E F M L H OF LOCK ST 300 WIDE ST BOX DIMENSIONS CABLE ENTRY DOOR SACE MOUNTING LATE DIM. B A C E F M L H ST ST ST ST ST NR OF LOCK 1 1 ST 400 WIDE ST BOX DIMENSIONS CABLE ENTRY DOOR SACE MOUNTING LATE DIM. B A C E F M L H ST ST ST ST ST ST ST ST ST NR OF LOCK 1 1 ST 500 WIDE ST BOX DIMENSIONS CABLE ENTRY DOOR SACE MOUNTING LATE DIM. B A C E F M L H ST ST ST NR OF LOCK 1 ST 600 WIDE ST BOX DIMENSIONS CABLE ENTRY DOOR SACE MOUNTING LATE DIM. B A C E F M L H ST ST ST ST ST ST ST ST ST ST ST ST ST NR OF LOCK 1 1 ST 800 WIDE ST BOX DIMENSIONS CABLE ENTRY DOOR SACE MOUNTING LATE DIM. B A C E F M L H ST ST ST ST ST NR OF LOCK 137 ST BOXES

ST DOUBLE DOOR BOXES Enclosure and door manufactured from 15/10 sheet steel. Mounting plate with folded edges manufactured from 5/10 sendzimir sheet steel.

4 ST DOUBLE DOOR BOXES Enclosure and door manufactured from 15/10 sheet steel. Mounting plate with folded edges manufactured from 5/10 sendzimir sheet steel. Enclosure and door: colour RAL 7035 textured finish. DELIVERY Box supplied with: - 4 zincpassivated rails to be fixed on the door - mounting plate - cable entry plates with sealing gasket - screws for earth connection and mounting accessories - locking system with ø 3mm double bar key CONFORMITY AND AROVAL Box with rod system. ROTECTION RATINGS - I 66 complying with IEC EN608; EN NEMA 1 complying with UL508A; UL50 - protection degree guaranteed by the two-component polyurethane foam seal (for technical details, refer to page 60) - impact resistance IK10 complying with IEC EN608; EN5010. BOX WITH STANDARD LOCKING SYSTEM BOX WITH ROD SYSTEM DOUBLE DOOR BOXES WITH STANDARD LOCKING SYSTEM ST BOX DIMENSIONS CABLE ENTRY NR. DOOR SACE MOUNTING LATE DIM. B A E F CABLE ENTRY M L H ST ST ST DOUBLE DOOR BOXES WITH ROD SYSTEM ST BOX DIMENSIONS CABLE ENTRY DOOR SACE MOUNTING LATE DIM. B A E F M L H ST ST ST ST BOXES

ST BOXES WITH GLAZED DOOR Enclosure manufactured from 15/10 sheet steel. Door manufactured from 15/10 sheet steel up to H=800mm; H>800, door manufactured from 0/10 sheet steel.

5 ST BOXES WITH GLAZED DOOR Enclosure manufactured from 15/10 sheet steel. Door manufactured from 15/10 sheet steel up to H=800mm; H>800, door manufactured from 0/10 sheet steel. Mounting plate manufactured from 5/10 sendzimir sheet steel. 3mm transparent plexiglas sheet. Enclosure and door: colour RAL 7035 textured finish. DELIVERY Box supplied with: - mounting plate - cable entry plate with sealing gasket - screws for earth connection and mounting accessories - locking systems with ø 3mm double bar key. CONFORMITY AND AROVAL ROTECTION RATINGS - I 66 complying with IEC EN608; EN NEMA 1 complying with UL508A; UL50 - protection degree guaranteed by the two-component polyurethane foam seal (for technical details, refer to page 60) - impact resistance IK10 complying with IEC EN608; EN5010. only for A>800 ST ST430 ST440 ST450 ST455 ST460 ST465 ST570 ST575 ST640 ST6430 ST660 ST6630 ST685 ST6830 ST6105 ST61030 ST6130 ST81030 ST8130 B A BOXES WITH GLAZED DOOR BOX DIMENSIONS CABLE ENTRY DOOR SACE MOUNTING LATE DIM. NR. OF LOCKS C E F M N L H ST BOXES WITH GLAZED DOOR

ST01 ST0145 ST0145 ST0146 ST0146 ST0157 ST0157 ST0164 ST0164 ST0168 ST0168 ST01610 ST01610 ST0161 ST01810 ST0181 INNER DOOR FOR BOXES BOX DIMENSIONS DOOR DIMENSIONS NR.

6 ST BOXES COMLEMENTARY ACCESSORIES INNER DOOR ST01 Frame and door manufactured from 15/10 sheet steel. Colour RAL 7035 textured finish. DELIVERY Supply includes: - frame - door - locking system with ø 3mm double bar key - mounting accessories. ROTECTION RATINGS - external: as box (I 66) - internal: I X. ST01 ST0145 ST0145 ST0146 ST0146 ST0157 ST0157 ST0164 ST0164 ST0168 ST0168 ST01610 ST01610 ST0161 ST01810 ST0181 INNER DOOR FOR BOXES BOX DIMENSIONS DOOR DIMENSIONS NR. ST ST B A L H C OF LOCKS ST450 ST ST455 ST ST460 ST ST465 ST ST570 ST ST575 ST ST640 ST ST6430 ST ST685 ST ST6830 ST ST6105 ST ST61030 ST ST6130 ST ST81030 ST ST8130 ST ST BOXES COMLEMENTARY ACCESSORIES

ROTECTION RATINGS - external: as box (I 66). - internal: I 1X.

7 MODULAR KIT MDST Frame and front panels manufactured from 15/10 sheet steel. Colour: RAL 7035 textured finish. DELIVERY Supply includes: - frame - front panel with modular slot complete with mounting accessories and captive screws - zincpassivated DIN rail (for each module) - mounting accessories. ROTECTION RATINGS - external: as box (I 66). - internal: I 1X. MDST MDST4300 MDST4400 MDST4500 MDST4500 MDST4600 MDST4600 MDST6600 MDST6600 MDST6800 MDST6800 MDST61000 MDST61000 MDST6100 MODULAR KIT FOR BOXES BOX DIM. ANEL DIM. NR. OF NR. OF ST ST B A L H M C MODULES ANELS ST430 ST x16 1 ST440 ST x16 1 ST450 ST x16 1 ST455 ST x16 1 ST460 ST x16 3* ST465 ST x16 3* ST660 ST x6 3** ST6630 ST x6 3** ST685 ST x6 4** ST6830 ST x6 4** ST6105 ST x6 5** ST61030 ST x6 5** ST6130 ST x6 6** * available on request the front blank panel MDST400. ** available on request the front blank panel MDST ST BOXES COMLEMENTARY ACCESSORIES

MODULAR LINTH ATZE Corner pieces manufactured from 5/10 sheet steel, with VC front covers caps. Front and side crosspieces manufactured from 0/10 press bent sheet steel.

8 MODULAR LINTH ATZE Corner pieces manufactured from 5/10 sheet steel, with VC front covers caps. Front and side crosspieces manufactured from 0/10 press bent sheet steel. Colour: RAL 705 textured finish DELIVERY The modular plinth is made up of: - corner pieces: supply includes 4 pieces complete with front covers and mounting hardware - front crosspieces: supply includes pieces - side crosspieces: supply includes pieces UNIVERSAL CORNER IECES ATZE DESCRITION ATZE SIDE CROSSIECES FOR ST BOXES DESCRITION CROSS. LENGTH (mm) ATZE-A100 ATZE-A00 CORNER IECES FOR LINTH H=100 CORNER IECES FOR LINTH H=00 ATZE-T0300S SIDE CROSS. FOR LINTH D= ATZE-T0400A SIDE CROSS. FOR LINTH D= Supply includes 4 pieces with mounting accessories Supply includes pieces. To order the side crosspieces H=00, add the suffix D to the code. I.E.: ATZE-T0300SD. ATZE UNIVERSAL FRONT CROSSIECES DESCRITION CROSS. LENGTH (mm) Note: for more information, assembly drawings and dimensional features, please check on page 17. ATZE-T0600 FRONT CROSS. FOR LINTH W= ATZE-T0800 FRONT CROSS. FOR LINTH W= ATZE-T1000 FRONT CROSS. FOR LINTH W= ATZE-T100 FRONT CROSS. FOR LINTH W= Supply includes pieces. To order the universal frontal crosspieces H=00, add the suffix D to the code. I.E.: ATZE-T0600D. 14 ST BOXES COMLEMENTARY ACCESSORIES

CANOY TT To be used for outdoor installation where the boxes are exposed to weather

We recommend the use of a special paint finish for enclosures placed outdoor.

TT104 400 00 TT04 400 50 TT105 500 00 TT05 500 50 TT106 600 50 TT06 600 300 TT08 800

HORIZONTAL DOOR RAIL WC WC001 WC00 WC003 WC004 WC005 BOX WIDTH 300 400 500 600 800

DOOR STO WA060 To be used to hold the door open at 90 avoiding accidental closing.

9 CANOY TT To be used for outdoor installation where the boxes are exposed to weather conditions. Manufactured from 15/10 sheet steel. Colour: RAL 7035 textured finish. We recommend the use of a special paint finish for enclosures placed outdoor. CANOY TT TT WIDTH DETH Supply includes: one piece with mounting accessories. TT TT TT TT TT TT TT HORIZONTAL DOOR RAIL WC Manufactured from 15/10 sendzimir sheet steel with ø 4.mm holes at 5mm centres. To be fixed on door profiles and used to fix cable or trunking. HORIZONTAL DOOR RAIL WC WC001 WC00 WC003 WC004 WC005 BOX WIDTH Supply includes: one piece with mounting accessories. DOOR STO WA060 To be used to hold the door open at 90 avoiding accidental closing. Manufactured from 0/10 and 30/10 zincpassivated sheet steel, it can be used on ST and ST boxes. Supply includes: single piece with mounting accessories and gasket for I ST BOXES COMLEMENTARY ACCESSORIES

- 4 pieces are required for box height 800 mm - 6 pieces are required for box height > 800 mm (single door) MICROERFORATED MOUNTING LATES WAZ.

10 MOUNTING LATE ADJUSTER WA To be used to adjust the depth of the mounting plate. Manufactured from 0/10 zincpassivated sheet steel. MOUNTING LATE ADJUSTER WA WA980 WA981 WA98 BOX DETH Supply includes: pieces. - 4 pieces are required for box height 800 mm - 6 pieces are required for box height > 800 mm (single door) MICROERFORATED MOUNTING LATES WAZ... F The microperforated mounting plate WAZF is assembled with the same procedure as the standard mounting plates. Made of 5/10 galvanized sheet steel. Starting from size 500x700 mm (WxH), the plate has raised edges on all sides. Available upon request. MICROERFORATED MOUNTING LATES WAZ BOX DIMENSIONS MOUNTING LATE DIM. B A L H WAZ-ST3F WAZ-ST33F WAZ-ST35F WAZ-ST43F WAZ-ST44F WAZ-ST45F WAZ-ST46F WAZ-ST55F WAZ-ST57F WAZ-ST64F WAZ-ST66F WAZ-ST68F WAZ-ST610F WAZ-ST61F WAZ-ST88F WAZ-ST810F WAZ-ST81F WAZ-ST1010F WAZ-ST101F WAZ-ST11F *late with raised edges starting from enclosure size 500x ST BOXES COMLEMENTARY ACCESSORIES

WALL MOUNTING BRACKETS SDWC-010 Manufactured from 5/10 zincpassivated sheet steel. Supply includes: nr. 4 pieces.

1 piece with sealing gasket and mounting accessories.

CABLE ENTRY LATES WC... A Manufactured from 15/10 sheet steel. Colour: RAL 7035 textured finish DELIVERY Supply includes nr.

11 WALL MOUNTING BRACKETS SDWC-010 Manufactured from 5/10 zincpassivated sheet steel. Supply includes: nr. 4 pieces. CABLE ENTRY GLAND LATE WC Manufactured from 15/10 sheet steel. Colour: RAL 7035 textured finish DELIVERY Supply includes nr. 1 piece with sealing gasket and mounting accessories. CABLE ENTRY GLAND LATE WC WC016B WC018B WC019B WC00B WC0B LATE DIMENSIONS 158 X X X X X 18 FINNED CABLE ENTRY LATES WC... A Manufactured from 15/10 sheet steel. Colour: RAL 7035 textured finish DELIVERY Supply includes nr. 1 piece complete with seals and mounting accessories. FINNED CABLE ENTRY LATES WC WC016A WC018A WC019A WC00A WC0A LATE DIMENSIONS 158 X X X X X 18 Available on request. 145 ST BOXES COMLEMENTARY ACCESSORIES

WE75 1 INSERT 8 WE78 13 KEY 8 WE80 14 SCREW DRIVER INSERT WE50 15 LOCK *Including cam and locking cover.

12 LOCKING SYSTEMS WE WE REF. DESCRITION *WE35 1 VIRO INSERT *WE40 FIAT INSERT WE10 3 FIAT KEY WE55 4 ETA INSERT ø 3 WE160 5 ETA KEY ø 3 WE60 6 INSERT 6 WE63 7 KEY 6 WE65 8 INSERT 7 WE68 9 KEY 7 WE70 10 INSERT 6,5 WE73 11 KEY 6,5 WE75 1 INSERT 8 WE78 13 KEY 8 WE80 14 SCREW DRIVER INSERT WE50 15 LOCK *Including cam and locking cover. LOCKING SYSTEMS WE WE REF. DESCRITION 1 WE85 1 T HANDLE WITH KEYLOCK WE88 WING HANDLE WITH KEYLOCK LOCKING SYSTEMS FOR DOUBLE DOOR BOXES WITH ROD MECHANISM WE REF. DESCRITION WE010 1 ROD DRIVE WE080 FIAT INSERT WE10 3 FIAT KEY WE07 4 FIAT COVER WE030 5 ETA INSERT Ø 3 WE160 6 ETA KEY Ø 3 WE040 7 ETA INSERT Ø 5 WE170 8 ETA KEY Ø 5 WE050 9 INSERT 7 WE KEY 7 WE INSERT 8 WE190 1 KEY 8 WE INSERT 7 WE00 14 KEY 7 WE00 15 ETA COVER 146 ST BOXES COMLEMENTARY ACCESSORIES

SD TERMINAL BOXES SDV TERMINAL BOXES WITH SCREWED LID /DELIVERY Box manufactured from 1/10 sheet steel. - lid fixed with captive screws - holes for fixing hinges. Colour: RAL 7035 textured finish.

13 SD TERMINAL BOXES SDV TERMINAL BOXES WITH SCREWED LID /DELIVERY Box manufactured from 1/10 sheet steel. - lid fixed with captive screws - holes for fixing hinges. Colour: RAL 7035 textured finish. CONFORMITY AND AROVAL ROTECTION RATINGS - I 66 complying with IEC EN608; EN NEMA 4 complying with UL508A; UL50 - protection degree guaranteed by the two-component polyurethane foam seal (for technical details, refer to page 60) - impact resistance IK10 complying with IEC EN608; EN5010. only for B=600 TERMINAL BOXES only for B=600 To be ordered separately: - mounting plate and/or DIN rails. SDV BOX DIMENSIONS B A SDV SDV SDV SDV SDV SDV SDV SDV SDV SDV SDV SDV SDV SDV SDV SDV SDV SDV SDV SDV SDV SDV SD TERMINAL BOXES

SDF TERMINAL BOXES WITH GLAND LATES /DELIVERY Box manufactured from 1/10 sheet steel with gland plates complete with gasket - lid fixed with captive screws - holes for fixing hinges.

14 SDF TERMINAL BOXES WITH GLAND LATES /DELIVERY Box manufactured from 1/10 sheet steel with gland plates complete with gasket - lid fixed with captive screws - holes for fixing hinges. Colour: RAL 7035 textured finish. CONFORMITY AND AROVAL ROTECTION RATINGS - I 66 complying with IEC EN608; EN NEMA 4 complying with UL508A; UL50 - protection degree guaranteed by the two-component polyurethane foam seal (for technical details, refer to page 60) - impact resistance IK10 complying with IEC EN608; EN5010. only for B=600 only for B=600 gland plate hole SDF DIMENSIONS B A C SDF SDF TERMINAL BOXES WITH GLAND LATES TOTAL NR. OF GLAND LATES NR. OF GLAND LATES SIDE B 4 NR. OF GLAND LATES SIDE A - SDF SDF SDF SDF SDF SDF SDF SDF SDF SDF To be ordered separately: - mounting plate and/or DIN rails. 148 SD TERMINAL BOXES

SDVX TERMINAL BOXES WITH TRANSARENT LID /DELIVERY Box manufactured from 1/10 sheet steel. - hinged lid with captive screws and plexiglas for viewing. Colour: RAL 7035 textured finish.

15 SDVX TERMINAL BOXES WITH TRANSARENT LID /DELIVERY Box manufactured from 1/10 sheet steel. - hinged lid with captive screws and plexiglas for viewing. Colour: RAL 7035 textured finish. ROTECTION RATINGS - I 55. CONFORMITY AND AROVAL TERMINAL BOXES WITH TRANSARENT LID SDV DIMENSIONS WEIGHT B A KG. SDVX SDVX To be ordered separately: - mounting plate and/or DIN rails. only for B=600 only for B= SD TERMINAL BOXES

SDVX-B TERMINAL BOXES FOR BUS SYSTEMS /DELIVERY Boxes made of 1/10 sheet steel. - hinged cover with tamper-proof screwed closure and plexiglas for internal inspection.

16 SDVX-B TERMINAL BOXES FOR BUS SYSTEMS /DELIVERY Boxes made of 1/10 sheet steel. - hinged cover with tamper-proof screwed closure and plexiglas for internal inspection. Colour: RAL 7035 textured finish. ROTECTION RATINGS - I 55. CONFORMITY AND AROVAL TERMINAL BOX FOR BUS SYSTEMS SDVX BOX DIMENSIONS B A SDVX531B To be ordered separately: - mounting plate and/or DIN rails. 150 SD TERMINAL BOXES

SD TERMINAL BOXES WITH DOOR /DELIVERY Box manufactured from 1/10 sheet steel. Door manufactured from 15/10 sheet steel. - locking system with Ø 3mm double bar key. Colour: RAL 7035 textured finish.

17 SD TERMINAL BOXES WITH DOOR /DELIVERY Box manufactured from 1/10 sheet steel. Door manufactured from 15/10 sheet steel. - locking system with Ø 3mm double bar key. Colour: RAL 7035 textured finish. ROTECTION RATINGS - I 55. TERMINAL BOXES WITH DOOR SD DIMENSIONS WEIGHT B A KG. SD SD SD SD SD SD SD SD SD To be ordered separately: - mounting plate and/or DIN rails. 151 SD TERMINAL BOXES

SD TERMINAL BOXES COMLEMENTARY ACCESSORIES WALL MOUNTING BRACKETS SDWC-010 Manufactured from 5/10 zincpassivated sheet steel. Supply includes: nr. 4 pieces.

45 SDA- 00 00 176 170 0.59 SDA-31 300 150 76 140 0.87 SDA-3 300 00 76 170 0.9 SDA-33 300 300 76 70 1.46 SDA-4 400 00 376 170 1.6 SDA-43 400 300 376 70 1.99 SDA-44 400 400 376 370.

18 SD TERMINAL BOXES COMLEMENTARY ACCESSORIES WALL MOUNTING BRACKETS SDWC-010 Manufactured from 5/10 zincpassivated sheet steel. Supply includes: nr. 4 pieces. MOUNTING LATE SDA Manufactured from 0/10 sendzimir sheet steel. Supply includes nr. 1 piece. MOUNTING LATE SDA SDA BOX DIMENSIONS B A WEIGHT WIDTH HEIGHT KG. SDA SDA SDA SDA SDA SDA SDA SDA SDA SDA SDA SDA SDA SDA SDA HINGES SDWA-005 Manufactured from white zincpassivated alloy. DELIVERY Supply includes nr. 6 hinges with mounting accessories. 15 SD TERMINAL BOXES COMLEMENTARY ACCESSORIES

INNER RAILS SDWA Manufactured from sendzimir sheet steel bars. DELIVERY Supply includes nr. 10 pieces. INNER RAILS SDWA BOX WIDTH B H SDWA-013 150 15 SDWA-015 00 175 7.

19 INNER RAILS SDWA Manufactured from sendzimir sheet steel bars. DELIVERY Supply includes nr. 10 pieces. INNER RAILS SDWA BOX WIDTH B H SDWA SDWA SDWA SDWA SDWA SDWA SDWA button hole 6x SD TERMINAL BOXES COMLEMENTARY ACCESSORIES

20 CR RACK BOXES The boxes cover a range from 3 to 1 U and are available in depths with a larger cable entry. The locking system operating from the front of the box guarantees the sealing of the enclosure. The excellent appearance is achieved by external silk-screen printed plexiglas. Three sections box manufactured from 15/10 press bent sheet steel. Door manufactured from 0/10 sheet steel with 4mm external silk-screen printed plexiglas complete with closing system Ø 3mm double bar key. Supply includes mounting plate manufactured from 5/10 sendzimir sheet steel. Colour: RAL 7035 textured finish. rofiles for the fixing of the transparent panel: colour RAL 705 textured finish. ROTECTION RATINGS - I 55. RACK BOXES CR DIMENSIONS MOUNTING LATE HE B A 1 L H CR CR CR0645 CR0655 CR0945 CR0955 CR145 CR155 CR1545 CR1555 CR1845 CR1855 CR145 CR CR RACK BOXES

21 Inner plate ETA_Boxes_Solutions_en_0911.pdf Helsinki tel automation@klinkmann.fi St. etersburg tel klinkmann@klinkmann.spb.ru Moscow tel moscow@klinkmann.spb.ru Yekaterinburg tel yekaterinburg@klinkmann.spb.ru Samara tel samara@klinkmann.spb.ru Кiev tel klinkmann@klinkmann.kiev.ua Riga tel klinkmann@klinkmann.lv Vilnius tel post@klinkmann.lt Tallinn tel klinkmann.est@klinkmann.ee Мinsk tel minsk@klinkmann.com

BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES

BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES ST WALL-MOUNTING BOXES WITH BLANK DOOR STP WALL-MOUNTING BOXES WITH PLEXI DOOR ST/STP COMPLEMENTARY ACCESSORIES SDV TERMINAL BOXES WITH SCREWED COVER SDF TERMINAL