Junction box for EKL light

Transcription

1 M EKL light Junction box Junction box for EKL light Features Chemical-resistant Temperature-resistant Flame-retardant Absolutely corrosion-proof Seawater-proof Description Polyester enclosures have proven their worth in many industrial plants. They offer safe protection even when they are used under extremely unfavorable conditions, on exposure to aggressive chemical media or hard mechanical conditions. The inside base of the enclosure has at its sides, threaded bushings for the fastening of mounting rails or panels. The enclosure is mounted by means of insulated screws outside of the lid seal. Material glass-fiber reinforced polyester, EN surface resistance >10 12 Ω Colour RAL 7000/RAL 7001, grey Mechanical resistance to EN impact energy 7 Nm Protection class to EN 60529/IEC IP 66/67 Supply voltage 240 V/415 V Cable gland IP64 Standard seal EPDM -20 C to +100 C Silikon -55 C to +100 C Lid screws Stainless steel cross slot (+ -) Selection chart Short form Dimensions Qty/Terminal Terminal Qty/earth Glands per Terminal Order no. title size identification terminals enclosure range x 160 x 90 2/6 mm 2 L, N 2 with 6 mm 2 1 x M 25 8 to 17 mm x threaded M S 160 x 160 x 90 3/6 mm 2 L1; L2, L3 4 with 6 mm 2 1 x M 25 8 to 17 mm x threaded M /A-09/06-BEH-E246962/3E 400 D 260 x 160 x 90 6/6 mm 2 2 x L1; 2 x L2; 6 with 6 mm 2 1 x M 25 8 to 17 mm x L3 6 x threaded M 20 Cold leads cable length 1.2 m, gland M20 Cable cross section 4 mm 2 Order no Cable cross section 2.5 mm 2 Order no

2 M EKL light Junction box Junction box 300 Connection diagramm for junction box 300 Junction/termination box 400S Connection diagramm for junction box 400 S Double junction box 2 Star connection 3 Intermediate junction box Heating circuit junction box 400D Connection diagramm for junction box 400 D /A-09/06-BEH-E246962/4E 1 Delta connection 2 Star connection 49

3 EKL medium Junction box Junction box for EKL medium Features Chemical-resistant Temperature-resistant Flame-retardant For use in ex areas with surface resistance < 10 9 Ω Absolutely corrosion-proof Seawater-proof Description Polyester enclosures have proven their worth in many industrial plants. They offer safe protection even when they are used under extremely unfavorable conditions, on exposure to aggressive chemical media or hard mechanical conditions. The inside base of the enclosure has at its sides, threaded bushings for the fastening of mounting rails or panels. The enclosure is mounted by means of insulated screws outside of the lid seal. Explosion protection Ex protection type II 2G EEx e II T6 Certification PTB 01 ATEX 1104 Material glass-fiber reinforced polyester, EN surface resistance >10 12 Ω Colour RAL 9005, black Mechanical resistance to EN impact energy 7 Nm Protection class to EN 60529/IEC IP 66/67 Cable gland IP 65 Supply voltage 240 V/415 V Standard seal EPDM -20 C up to +100 C Silikon -55 C up to +100 C Lid screws Stainless steel cross slot (+ -) Selection chart Short form Enclosure Qty/Terminal Terminal Qty/Earth Glands per Terminal range Order no. title sizes size mm 2 identification terminal mm 2 enclosure Ex x 160 x 90 2/6 mm 2 L, N 2/6 mm 2 1 x M 25 8 to 17 mm x threaded M /A-09/06-BEH-E246963/3E Ex 400 S 160 x 160 x 90 3/6 mm 2 L1; L2, L3 4/6 mm 2 1 x M 25 8 to 17 mm x threaded M20 Ex 400 D 260 x 160 x 90 6/6 mm 2 2 x L1; 2 x L2; je 6/6 mm 2 1 x M 25 8 to 17 mm x L3 6 x threaded M 20 Cold leads cable length 1.2 m, gland M20 Cable cross section 4 mm 2 Order no Cable cross section 2.5 mm 2 Order no

4 EKL medium Junction box Junction box Ex 300 Connection diagram for junction box Ex 300 Junction box/terminal box Ex 400S Connection diagram for junction box Ex 400 S Double junction box 2 Star connection 3 Intermediate junction box Junction box Ex 400D Connection diagram for junction box Ex 400 D /A-09/06-BEH-E246963/4E 1 Delta connection 2 Star connection 53

5 EKL premium Junction box Junction box Features Chemical-resistant Temperature-resistant Flame-retardant For use in ex areas with surface resistance < 10 9 Ω Absolutely corrosion-proof Seawater-proof Description Polyester enclosures have proven their worth in many industrial plants. They offer safe protection even when they are used under extremely unfavorable conditions, on exposure to aggressive chemical media or hard mechanical conditions. The inside base of the enclosure has at its sides, threaded bushings for the fastening of mounting rails or panels. The enclosure is mounted by means of insulated screws outside of the lid seal. Explosion protection Ex protection type II 2G EEx e II T6 Certification PTB 01 ATEX 1104 Material glass-fiber reinforced polyester, EN surface resistance >10 12 Ω Colour RAL 9005, black Mechanical resistance to EN impact energy 7 Nm Protection class acc: toen 60529/IEC IP 66/67 Cable gland IP 65 Supply voltage 240 V/415 V Standard seal EPDM -20 C up to +100 C Silikon -55 C up to +100 C Lid screws Stainless steel cross slot (+ -) Selection chart Enclosure Enclosure Terminals/ Terminal Earth terminals/ Glands/ Terminal range Order no. Short form title sizes cross section identification cross section bore holes Ex x 160 x 90 2/6 mm 2 L, N 2 with 6 mm 2 1 x M 25 8 up to 17 mm x threaded M /A-09/06-BEH-E246964/3E Ex 400 S 160 x 160 x 90 3/6 mm 2 L1; L2, L3 4 with 6 mm 2 1 x M 25 8 up to 17 mm x threaded M20 Ex 400 D 260 x 160 x 90 6/6 mm 2 2 x L1; 2 x L2; each 6/6 mm 2 1 x M 25 8 up to 17 mm x L3 6 x threaded M 20 Cold leads cable length 1.2 m, gland M20 Cable cross section 4 mm 2 Order no Cable cross section 2.5 mm 2 Order no

6 EKL premium Junction box Junction box Ex 300 Connection diagram for junction box Ex 300 Junction box/terminal box Ex 400S Connection diagram for junction box Ex 400 S Double junction box 2 Star connection 3 Intermediate junction box Junction box Ex 400D Connection diagram for junction box Ex 400 D /A-09/06-BEH-E246964/4E 1 Delta connection 2 Star connection 57

7 Polyester enclosures Polyester enclosures Selection chart Empty enclosure Features Chemical-resistant Temperature-resistant Flame-retardant Use in Ex areas with a surface resistance < 10 9 Ohm, black enclosure Absolutely corrosion-proof Seawater-proof Description Polyester enclosures have proven their worth in many industrial plants. They offer safe protection even when they are used under extremely unfavorable conditions, on exposure to aggressive chemical media or hard mechanical conditions. The inside base of the enclosure has at its sides, threaded bushings for the fastening of mounting rails or panels. The enclosure is mounted by means of insulated screws outside of the lid seal. External dimensions Polyester Polyester in mm black, IP 66/67 grey, IP 66/67 Length (L) Width (B) Height (H) Order no. Order no / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /5012 black Ex enclosure / /... grey Explosion protection Ex protection type II 2G EEx e II II 2G EEx e II (according to EN 50014) I M2 EEx e I Certification PTB 01 ATEX 1014 U PTB 01 ATEX 1014 U (further certifications on request) UL E (NEMA 4X) UL E (NEMA 4X) For group 1 IBExU01ATEX1042 U /06-BCS-B201167/1E Material glass-fiber reinforced polyester, EN glass-fiber reinforced polyester, EN surface resistance < 10 9 Ω surface resistance >10 12 Ω halogen-free halogen-free Colour RAL 9005, black RAL 7000/RAL 7001, grey Lid screws (other models on request) stainless steel cross-head (+ -) stainless steel cross-head (+ -) Standard seal EPDM -20 C to +100 C EPDM -20 C to +100 C Silicone -55 C to +100 C Silicone -55 C to +100 C Mechanical resistance impact energy 7 Nm impact energy 7 Nm (according to EN 50014) Protection class EN 60529/IEC IP 66/IP 67 IP 66/IP 67 96

8 Polyester enclosures/distribution boxes Dimensions (mm) A C B D The dimensions indicated on this page apply to the following polyester enclosures and distribution boxes: IP enclosure black /... IP enclosure grey /... Ex enclosure black /... Ex enclosure grey /... IP distribution box black /... IP distribution box grey /... EEx e distribution box black /... EEx e distribution box grey /... EEx i distribution box black /... EEx i distribution box grey /... External dimensions: 80 x 75 x 55 mm 230 g Article no.: /7555 External dimensions: 110 x 75 x 55 mm 280 g Article no.: /7555 External dimensions: 160 x 75 x 55 mm 370 g Article no.: /7555 External dimensions: 190 x 75 x 55 mm 430 g /06-BCS-B201167/2E All dimensions are approximate measurements and subject to technical changes. Article no.: /

9 Polyester enclosures/distribution boxes Dimensions (mm) A C B D The dimensions indicated on this page apply to the following polyester enclosures and distribution boxes: IP enclosure black /... IP enclosure grey /... Ex enclosure black /... Ex enclosure grey /... IP distribution box black /... IP distribution box grey /... EEx e distribution box black /... EEx e distribution box grey /... EEx i distribution box black /... EEx i distribution box grey /... External dimensions: 122 x 120 x 90 mm 660 g Article no.: /2090 External dimensions: 122 x 120 x 120 mm 890 g Article no.: /2012 External dimensions: 220 x 120 x 90 mm 1040 g Article no.: /2090 External dimensions: 255 x 250 x 120 mm 2700 g /06-BCS-B201167/3E 98 Article no.: /5012 All dimensions are approximate measurements and subject to technical changes.

10 Polyester enclosures/distribution boxes Dimensions (mm) A C B D The dimensions indicated on this page apply to the following polyester enclosures and distribution boxes: IP enclosure black /... IP enclosure grey /... Ex enclosure black /... Ex enclosure grey /... IP distribution box black /... IP distribution box grey /... EEx e distribution box black /... EEx e distribution box grey /... EEx i distribution box black /... EEx i distribution box grey /... External dimensions: 255 x 250 x 160 mm 3275 g Article no.: /5016 External dimensions: 400 x 250 x 120 mm 3700 g Article no.: /5012 External dimensions: 400 x 250 x 160 mm 4800 g Article no.: /5016 External dimensions: 160 x 160 x 90 mm 1280 g Article no.: / /06-BCS-B201167/4E All dimensions are approximate measurements and subject to technical changes. External dimensions: 160 x 160 x 120 mm 1500 g Polyester, grey, black Article no.: /

11 Polyester enclosures/distribution boxes Dimensions (mm) A C B D The dimensions indicated on this page apply to the following polyester enclosures and distribution boxes: IP enclosure black /... IP enclosure grey /... Ex enclosure black /... Ex enclosure grey /... IP distribution box black /... IP distribution box grey /... EEx e distribution box black /... EEx e distribution box grey /... EEx i distribution box black /... EEx i distribution box grey /... External dimensions: 260 x 160 x 90 mm 1750 g Article no.: /6090 External dimensions: 360 x 160 x 90 mm 2300 g Article no.: /6090 External dimensions: 400 x 405 x 120 mm 5100 g Article no.: /0512 External dimensions: 400 x 405 x 165 mm 7740 g Article no.: /0516 External dimensions: 600 x 250 x 120 mm /06-BCS-B201167/5E g Article no.: /5012 All dimensions are approximate measurements and subject to technical changes.

12 Polyester distribution boxes for Zone 1 and Zone 21 Polyester distribution boxes Description Polyester distribution boxes have been of great advantage in many industrial plants. They offer safe protection even when they are exposed to extreme environmental conditions, aggressive chemical media or high mechanical stress. The narrow sides within the enclosure hold threaded bushings for the fixing of terminal rails or mounting panels. The enclosure is mounted by means of insulated screws outside of the lid sealing gasket. These same high-quality explosion-proofed enclosures are used in hazardous areas by inflammable dust (Zone 21 and 22).The fundamental prerequisites of the protection through enclosure protection class are fulfilled with the heating up calculation as per the accompanying sheet and a separate IP protection test. EC model test certification was issued in 2000 by the nominated body IBExU. Option External feet of high-quality stainless steel Components Rail-mounted terminals, terminal markers, cable glands, mounting panels, rails, type labels, labels Installation instructions The installer must make sure that the enclosure used is suitable for the corresponding field of application. This means that the marking must correspond to the classification of the Ex area. Also must the temperature class of the distribution box meet the respective requirements. IP distribution box / /... EEx e distribution box / /... EEx i distribution box / /... black grey Explosion protection Ex protection type II 2G EEx e II T6 resp. T5 II 2G EEx e II T6 resp. T5 (according to EN 50014) II 2G EEx e ia IIC T6 resp. T5 II 2G EEx e ia IIC T6 resp. T5 II 2D IP 6x T 80 C Ambient temperature ranges -20 C (-55 C) to +40 C at T6-20 C (-55 C) to +40 C at T6 (special temperature ranges on request) -20 C (-55 C) to +55 C at T5-20 C (-55 C) to +55 C at T5 Certifications For Zone 1 and 2 PTB 01 ATEX 1104 PTB 01 ATEX 1104 For Zone 21 and 22 IBExU00ATEX1081 (further certifications on request) /05-BCS-B201168/1E Material glass-fibre reinforced polyester, EN glass-fibre reinforced polyester, EN surface resistance < 10 9 Ω surface resistance > Ω halogen-free halogen-free Colour RAL 9005, black RAL 7000/RAL 7001, grey Lid screws stainless steel, captive stainless steel, captive (other models on request) cross-head (+ -) cross-head (+ -) Standard seals EPDM -20 C to +100 C EPDM -20 C to +100 C silicone -55 C to +100 C silicone -55 C to +100 C Mechanical resistance impact energy 7 Nm impact energy 7 Nm according to EN Protection class EN 60529/IEC IP 66/IP 67 IP 66/IP 67 Rated voltage max V max V 101

13 Polyester distribution boxes The table on this page applies to the following polyester distribution boxes: IP distribution box black /... IP distribution box grey /... EEx e distribution box black /... EEx e distribution box grey /... EEx i distribution box black /... EEx i distribution box grey /... Rail-mounted terminal components/maximum number Polyester distribution boxes Article no. Mini-terminal AKZ4 WDU 2.5 WDU 2.5 bl WDU 4 Polyester distribution boxes TS Terminals TS Terminals TS Terminals TS Terminals TS Terminals * per rail * per rail * per rail * per rail * per rail / / / / / / / / / / / / / / / / / /05-BCS-B201168/2E / / * TS = mounting rail 102

14 Polyester distribution boxes The table on this page applies to the following polyester distribution boxes: IP distribution box black /... IP distribution box grey /... EEx e distribution box black /... EEx e distribution box grey /... EEx i distribution box black /... EEx i distribution box grey /... A Cable glands/maximum number C D Polyester distribution boxes B Article no. Polyester distribution boxes Side M 12 x 1.5 M 16 x 1.5 M 16 x 1.5 M 20 x 1.5 M 20 x 1.5 M 25 x 1.5 M 32 x 1.5 M 40 x 1.5 M 50 x 1.5 M 63 x 1.5 extended extended /7555 A/B C/D /7555 A/B C/D /7555 A/B C/D /7555 A/B C/D /2090 A/B C/D /2012 A/B C/D /2090 A/B C/D /6090 A/B C/D /6012 A/B C/D /6090 A/B C/D /6090 A/B C/D /5012 A/B C/D /5016 A/B C/D /5012 A/B C/D /5016 A/B C/D /0512 A/B C/D /05-BCS-B201168/3E /0516 A/B C/D /5012 A/B C/D Each enclosure side wall has only a limited number of gland entries to ensure the mechanical stability of the enclosure. 103

15 Polyester distribution boxes The table on this page applies to the following polyester distribution boxes: IP distribution box black /... IP distribution box grey /... EEx e distribution box black /... EEx e distribution box grey /... EEx i distribution box black /... EEx i distribution box grey /... External dimensions, earth bars, mounting panels Polyester distribution boxes Article no. External dimensions in mm Earth bars Mounting panel Polyester enclosure Length Width Height Type Order no. Type Order no. Order no / MK / MK / MK / MK / QS LS / QS LS / QS LS / QS LS / QS LS / QS LS / QS LS / QS LS / QS LS / QS LS / QS LS / QS LS / QS LS /05-BCS-B201168/4E / QS LS

16 Aluminium enclosures Selection chart IP enclosure External dimensions Aluminium in mm grey, IP 66 Length Width Height Order no. Aluminium enclosures Features temperature-resistant chemical-resistant against acetone and ammoniac; against benzene, benzole, heating oil seawater-resistant with special varnishing and priming on request / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /1018 Description Aluminium enclosures have proven to be an excellent solution for encapsulating and shielding components and modules in electronic and pneumatic engineering. The base and lid of the enclosure come with earthing screws for the connection of the protective conductor. Fixing holes outside the sealed space. grey Ex enclosure /... Explosion protection Ex protection type II 2G EEx e II (according to EN 50014) Certification PTB 01 ATEX 1028 U (further certifications on request) UL-file: E (NEMA 4X) /06-BCS-B201173/1E Material aluminium, die or shell casting, (metal mould) ALSi 12, Mg < 6 thread -% Colour RAL 7001, silver grey special varnish and seawater-resistant varnish on request Lid screws stainless steel, captive, (other models on request) cross-head (+ -) Standard seals CR -20 C to +80 C silicone -55 C to +100 C Mechanical resistance impact energy 7 Nm (according to EN 50014) Protection class EN 60529/IEC (higher protection class on request) IP

17 Aluminium enclosures/distribution boxes Dimensions (mm) The dimensions on this page apply to the following aluminium enclosure/distribution boxes: C A B D IP enclosure /... Ex enclosure /... IP distribution box /... EEx e distribution box /... EEx i distribution box /... External dimensions: 58 x 64 x 36 mm 150 g Article no.: /6436 External dimensions: 98 x 64 x 36 mm 250 g Article no.: /6436 External dimensions: 150 x 64 x 36 mm 320 g Article no.: /6436 External dimensions: 75 x 80 x 57 mm /06-BCS-B201173/2E 300 g Article no.: /

18 Aluminium enclosure/distribution boxes Dimensions (mm) The dimensions on this page apply to the following aluminium enclosure/distribution boxes: C A B D IP enclosure /... Ex enclosure /... IP distribution box /... EEx e distribution box /... EEx i distribution box /... External dimensions: 125 x 80 x 57 mm 440 g Article no.: /8057 External dimensionsv: 175 x 80 x 57 mm 510 g Article no.: /8057 External dimensions: 122 x 122 x 80 mm 940 g Article no.: /2080 External dimensions: 122 x 120 x 90 mm 880 g /06-BCS-B201173/3E All dimensions are approximate measurements and subject to terminal changes. 108 Article no.: /2090

19 Aluminium enclosure/distribution boxes Dimensions (mm) The dimensions on this page apply to the following aluminium enclosure/distribution boxes: C A B D IP enclosure /... Ex enclosure /... IP distribution box /... EEx e distribution box /... EEx i distribution box /... External dimensions: 220 x 120 x 80 mm 1390 g Article no.: /2080 External dimensions: 220 x 120 x 90 mm 1350 g Article no.: /2090 External dimensions: 360 x 120 x 80 mm 1950 g Article no.: /2080 External dimensions: 160 x 160 x 90 mm 1470 g /06-BCS-B201173/4E All dimensions are approximate measurements and subject to terminal changes. Article no.: /

20 Aluminium enclosures/distribution boxes Dimensions (mm) The dimensions on this page apply to the following aluminium enclosure/distribution boxes: C A B D IP enclosure /... Ex enclosure /... IP distribution box /... EEx e distribution box /... EEx i distribution box /... External dimensions: 260 x 160 x 90 mm 2100 g Article no.: /6090 External dimensions: 360 x 160 x 90 mm 2700 g Article no.: /6090 External dimensions: 560 x 160 x 90 mm 3600 g Article no.: /6090 External dimensions: 200 x 230 x 110 mm 2450 g /06-BCS-B201173/5E All dimensions are approximate measurements and subject to technical changes. 110 Article no.: /3011

21 Aluminium enclosures/distribution boxes Dimensions (mm) The dimensions on this page apply to the following aluminium enclosure/distribution boxes: C A B D IP enclosure /... Ex enclosure /... IP distribution box /... EEx e distribution box /... EEx i distribution box /... External dimensions: 280 x 230 x 110 mm 2990 g Article no.: /3011 External dimensions: 330 x 230 x 110 mm 3400 g Article no.: /3011 External dimensions: 400 x 230 x 110 mm 4600 g Article no.: /3011 External dimensions: 600 x 230 x 110 mm 6800 g /06-BCS-B201173/6E All dimensions are approximate measurements and subject to technical changes. Article no.: /

22 Aluminium enclosures/distribution boxes Dimensions (mm) The dimensions on this page apply to the following aluminium enclosure/distribution boxes: C A B D IP enclosure /... Ex enclosure /... IP distribution box /... EEx e distribution box /... EEx i distribution box /... External dimensions: 400 x 310 x 110 mm 6600 g Article no.: /1011 External dimensions: 600 x 310 x 110 mm 9400 g Article no.: /1011 Aluminium enclosure for NPT thread External dimensions: 174 x 174 x 90 mm Wall thickness: 14 mm 1500 g aluminum alloy, grey Article no.: /7490 External dimensions: 294 x 244 x 110 mm Wall thickness: 14 mm 3130 g aluminum alloy, grey Article no.: / /06-BCS-B201173/7E All dimensions are approximate measurements and subject to terminal changes. External dimensions: 417 x 324 x 110 mm Wall thickness: 14 mm 6700 g aluminum alloy, grey Article no.: /

23 Aluminium distribution boxes for Zone 1 and Zone 21 Aluminium distribution boxes Description Aluminium distribution boxes have proven to be an excellent solution for encapsulating and shielding components and modules in electronic and pneumatic engineering. Bottom and lid of the distribution boxes come with earthing screws for the connecting of the protective conductor. Mounting threads in the bottom section, fixing holes outside of the sealed space. The same high quality explosion-proofed enclosures are used in hazardous areas by inflammable dust (Zone 21 and 22). By means of the heating calculation according to the supplement to the test certificate and a separate IP-protection test, the basic requirements of the protection through enclosure type of protection are met. Installation instructions The installer must make sure that the enclosure used is suitable for the corresponding field of application. This means that the marking must correspond to the classification of the Ex area. Also must the temperature class of the distribution box meet the respective requirements. IP distribution box /... EEx e distribution box /... EEx i distribution box /... grey Explosion protection Ex protection type II 2G EEx e II T6 resp. T5 (according to EN 50014) II 2G EEx e ia IIC T6 resp. T5 II 2D IP 6x T 80 C Ambient temperature ranges -55 C to +40 C at T6 (special temperature range on request) -55 C to +55 C at T5 Certification PTB 01 ATEX 1118 for Zone 21 and Zone 22 IBExU00ATEX1080 (further certifications on request) /05-BCS-B201174/1E Material aluminium, die or shell casting, AISi 12, Mg < 6 thread -% Colour/coating RAL 7001, silver grey special varnish and seawater-resistant varnish on request Lid screws stainless steel, captive, (other models on request) cross-head (+ -) Standard seals CR -20 C to +80 C silicone -55 C to +100 C Mechanical resistance impact energy 7 Nm (according to EN 50014) Protection class EN 60529/IEC IP 66 (higher protection class on request) Rated voltage max V 113

24 Aluminium distribution boxes Aluminum distribution boxes Rail-mounted terminals/maximum number The table on this page applies to the following aluminium distribution boxes: IP distribution box /... EEx e distribution box /... EEx i distribution box /... Article no. Mini-terminal AKZ4 WDU 2.5 WDU 2.5 bl WDU 4 Aluminium enclosure TS Terminals TS Terminals TS Terminals TS Terminals TS Terminals * per rail * per rail * per rail * per rail * per rail / / / / / / / / / / / / / / / / / / /05-BCS-B201174/2E / / / / * TS = mounting rail

25 Aluminium distribution boxes Aluminum distribution boxes External dimensions, earth bars, mounting plates The table on this page applies to the following aluminium distribution boxes: IP distribution box /... EEx e distribution box /... EEx i distribution box /... Article no. External dimensions in mm Earth bars/mantle terminal Mounting panel Aluminium-Gehäuse Length Width Height Type Order no. Type Order no. Order no / SB / SB / SB / SB / SB / SB LS / QS LS / QS LS / QS LS / QS LS / QS LS / QS LS / QS LS / QS LS / QS LS / / QS LS / QS LS / / QS LS / QS LS / QS LS / / QS LS /05-BCS-B201174/3E / QS LS /1018 QS = diagonal strip/horizontal alignment, e.g.: LS 4 = 4 clamping points for 8 connections LS = horizontal strip/vertical strip, e.g.: QS 3 = 3 clamping points for

26 Aluminium distribution boxes also for Zone 1 and Zone 21 Aluminum distribution box with lid Cable glands/ maximum number C A B The table on this page applies to the following aluminium distribution boxes with lid: IP distribution box /... D EEx e distribution box /... EEx i distribution box / /05-BCS-B201174/4E Article no. Aluminium enclosure Side M 12 x 1.5 M 16x 1.5 M 16 x 1.5 M 20 x 1.5 M 20 x 1.5 M 25 x 1.5 M 32 x 1.5 M 40 x 1.5 M 50 x 1.5 M 63 x 1.5 extended extended /6436 A/B C/D /6436 A/B C/D /6436 A/B C/D /8057 A/B C/D /8057 A/B C/D /8057 A/B C/D /2080 A/B C/D /2090 A/B C/D /2080 A/B C/D /2090 A/B C/D /2080 A/B C/D /6090 A/B C/D /6090 A/B C/D /6090 A/B C/D /6090 A/B C/D /3011 A/B C/D /3018 A/B C/D /3011 A/B C/D /3011 A/B C/D /3018 A/B C/D /3011 A/B C/D /3011 A/B C/D /1011 A/B C/D /1018 A/B C/D /1011 A/B C/D /1018 A/B C/D Each enclosure side wall has only a limited number of gland entries to ensure the mechanical stability of the enclosure. 116