Light Fitting for Fluorescent Lamps Series ECOLUX 6600

Transcription

1 > 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners E00 The light fittings series 6600 are useable for normal lighting, but also as group or centrally-supplied emergency light fitting. ATEX / IECEx / GOST NEC 505 NEC 506 NEC 500 Class I Class I Class II Class III Zone Zone Division /52 and 6600/ /56 x x x 6600/52 and 6600/54 x x x 6600/56 x 6600/52 and 6600/54 x 6600/56 x x x x x x x x x x WebCode 6600A Lighting /1

2 Selection table Version Lamps Electronic ballast Order number Weight Number of lamps Lamp wattage W kg ECOLUX channel ECG 6600/ channel ECG 6600/ channel ECG 6600/ channel ECG 6600/ channel ECG 6600/ channel ECG 6600/ Order number supplement Through wiring Standard: without 6600/ Special: with 3 conductors 6600/ Special: with 5 conductors 6600/ Cable entry Standard: M25 x 1.5; 1 cable entry, 6600/ stopping plugs Special: M20 or M 25 in moulded material or metal Specify on order 6600/ Switching off Standard: without 6600/ Special: with switch 8080, 2-pole 6600/ ECG V 1xDC (18 W, 36 W and 58 W; IEC-standard) 6600/ V 1xDC (18 W and 36 W; IEC-standard) 6600/ V 2xDC (17 W, 32 W and 40 W; NEC-standard) 6600/ Terminal strip Special: terminal strip 8184, 4 / 6 mm 2 solid / finely stranded 6600/ Standard: WAGO mm / Number of terminals Standard: with 3 cores; L1 + N + PE 6600/ Special: with 5 cores; L1 + L2 + L3 + N + PE 6600/ Address module Standard: without 6600/ Special: ADR20 ILS 6600/ Note The light fittings are supplied without tubes and mounting accessories. These parts must be ordered separately. Explosion protection Explosion protection Global (IECEx) Gas and dust IECEx BVS X Ex na II T4 Gc Ex tc IIIC T * C Dc oder Ex tb IIIC T * C Db * surface temperature see test certificate Europe (ATEX) Gas Zone 2: DMT 01 E 085 X Zone 2: E II 3 G Ex na IIC T4 Gc Dust Zone 21: DMT 01 ATEX E 086X Zone 22: DMT 01 E 085X Zone 21: E II 2D Ex tb IIIC T * C Db Zone 22: E II 3D Ex tc IIIC T * C Dc * surface temperature see test certificate Certificates and approvals Certificates Other approvals IECEx, ATEX, Brazil (UL do Brasil), Kazakhstan (GOST-K), Russia (GOST-R), USA Canada (FM), Belarus (GOST-B), Taiwan (ITRI) ship approval (GL) /2 Lighting

3 Technical data Electrical data Ballast Power factor cos p Disconnection of the light 6600/ / Lamp start Cold start Cold start Voltage Vac Vac Voltage Vdc Vdc DC during switching on Voltage Vdc Vdc DC during operation Frequency 0 / Hz 0 / Hz Operation of the lamps DC with 1 lamp with 2 lamps Lamps standard IEC IEC Lamp power 18, 36, 58 W 18, 36 W Nominal current 1x18W 85mA 2x18W 170mA 1x36W 160mA 2x36W 320mA 1x58W 250mA 2x58W 500mA cos p ) 0.96 capacitive; additional compensation not required 1x18W mA 2x18W mA 1x36W mA 2x36W mA 6600/ / Lamp start Cold start Cold start Voltage Vac Vac Voltage Vdc Vdc DC during switching on Voltage Vdc Vdc DC during operation Frequency 0 / Hz 0 / Hz Operation of the lamps DC with 2 lamps with 2 lamps Lamps standard IEC ANSI C78.81 Lamp power 18, 36, 58 W 17, 32, 40 W Nominal current On opening the diffuser Faulty lamp 1x18W 75mA 2x18W 150mA 1x36W 150mA 2x36W 300mA 1x58W 240mA 2x58W 480mA 1x17W mA 2x17W mA 1x32W mA 2x32W mA 1x40W mA 2x40W mA optional when opening the fastening mechanism of one of the quick fasteners, voltage to ballast will be switched off all-pole; contacts are positively opening, reconnection when cover and quick fasteners are closed. If lamp is faulty, power supply of lamps is switched off automatically by electronic ballast; when using a 2-channel-ECG power is switched off only to the defective lamp. Lighting /3

4 Technical data Luminous Characteristics Measures for light guidance Luminous intensity distribution Standard Wide beam, reflector painted white. Colour: signal white RAL 9003; prismatic structure for anti-glare in the diffuser sides. Special Additional reflector (easily mounted), broad deep-beam, aluminium anodized and semi-polished E00 Version 1-lamp, without reflector 1-lamp, with reflector Accuracy class acc. to LitG B21 B E00 Ambient conditions Ambient temperature 08259E00 Version 2-lamp, without reflector 2-lamp, with reflector Accuracy class acc. to LitG B21 B31 without trough wiring with trough wiring T a T s max T a T s max V (IEC) 6600/ C + 80 C C + 80 C 6600/ C + 80 C C + 80 C 6600/ C + 80 C C + 80 C V (IEC) 6600/ C + 95 C C + 95 C 6600/ C + 95 C C + 95 C V (IEC) 6600/ C + 70 C C + 70 C 6600/ C + 70 C C + 70 C 6600/ C + 75 C C + 75 C V (NEC) 6600/ C + 85 C 6600/ C + 85 C 6600/ C + 85 C Mechanical data Degree of protection IP66 (IP64 when using breather 8162) Protection class I (with internal PE connection terminal) Material Enclosure Polyester resin, glass fibre reinforced, colour white, similar RAL 9010 Lamp cover Polycarbonate Seal Silicone-gasket foamed into diffuser Quick-acting locks Polyamide, glass fibre reinforced, black / white Assembly parts Polyester resin, glass fibre reinforced, colour white, similar RAL 9010 Cover options Quick fasteners to open with screw-driver; cover hinged for access E00 /4 Lighting

5 Technical data Mounting / installation Mounting Cable glands Connection Standard Special 2 x M8 inserts in housing Mounting grooves in housing to accommodate bracket fitting and ceiling rails for variable light installation. Variable mounting distances of light fittings; see dimension drawings 1 x cable gland 8161, M25 x 1.5, cable dia. range: d mm 2 x stopping plugs 8290, M25 x 1.5 Entry parts in moulded plastic (8161 / 8290): M20 Metal glands: M20; M25; Metal cable gland earthing via metal adapter plates Spring cage terminal connection cross-section: max. 2 x 2.5 mm 2 3 pole (terminal marking: L1 + N + PE) 5 pole (terminal marking: L1 + L2 + L3 + N + PE) Terminal block with screw terminals connection cross-section: max. 2 x 6 mm 2 (solid) max. 2 x 4 mm 2 (flexible) numbers of terminals: 3 pole (terminal marking: L1 + N + PE) 5 pole (terminal marking: L1 + L2 + L3 + N + PE) Installation notes Looping through of There are 2 M25 x 1.5 cable entries on the connection side for looping through of connection cables cable (entry and exit on one side). Through wiring Fittings can be supplied with internal through-wiring. Entry and exit holes for connection cables are positioned on opposite sides. A through-wiring kit can be fitted after manufacture (see accessories). Terminals: See technical data top Wiring cross-section: 2.5 mm 2 for max. 16 A Monitoring module Function Monitoring and switching module for emergency light systems according to VDE 0108: The module is used for the monitoring of individual lights and for the control of network and safety lights. The module offers the following functions: Control of the light (ON / OFF) and function test Up to 20 addresses can be set for each electric circuit by means of a coding switch The operating mode of the lamp (continuous light, stand-by light or activation by means of a switch) is freely programmable Mixed operation within one circuit is possible Input voltage (Input between L+ and N-) Control input (between L and N) Connected power (output to light) Ambient temperature U N U DC U N P 230 (+ 10 % / - 15 %) V AC, 50 Hz V DC 230 (+ 10 % / - 15 %) V AC, 50 Hz W T a (Module) C Dimensions L x W x H = 95 x 40 x 32 mm Lighting /5

6 Accessories and spare parts Designation Figure Description Art. no. Weight Fluorescent lamp 04936E00 Two-pin cap d 26 mm Light colour: universal white 18 W 1350 Im kg W 3350 Im 58 W 5200 Im Diffuser cover Switch 05329E00 for light fitting 18 W for light fitting 36 W for light fitting 58 W Switching element 8080/1-3-L, 2 normally closed contacts Mounting kit for through wiring Reflectors 10809E E E00 For later installation into standard-light fitting DV3, tension clamp terminals 3 x 2.5 mm 2, max. 16 A terminal marking: L1 + N + PE 18 W W W DV5, tension clamp terminals 5 x 2.5 mm 2, max. 16 A terminal marking: L1 + L2 + L3 + N + PE 18 W W W DV3, screw terminals 3 x 2.5 mm 2, max. 16 A terminal marking: L1 + N + PE 18 W W W DV5, screw terminals 5 x 2.5 mm 2, max. 16 A terminal marking: L1 + L2 + L3 + N + PE 18 W W W for later installation, broad deep beam For 1-lamp light fittings 18 W For 1-lamp light fittings 36 W For 1-lamp light fittings 58 W For 2-lamps light fittings18 W For 2-lamps light fittings36 W For 2-lamps light fittings 58 W /6 Lighting

7 Accessories and spare parts Designation Figure Description Art. no. Weight kg Adapter plates for earth continuity when using metal glands; 1 x M20 x piece E00 1 x M25 x piece 1 x NPT 1 / 2 1 piece x NPT 3 / 4 1 piece x M20 x piece 2 x M25 x piece Lamp-holder 2 x NPT 1 / 2 1 piece Lamp holder for two-pin cap lamps G E00 Mounting rail for a variable mounting distance of 1 pair E00 Mounting clamp bracket Mounting bracket mounted on the mounting rail for a variable mounting distance of 1 pair E00 Ring bolts M8, direct mounting in insert nuts, 1 pair Wall-mounting bracket Ceiling mounting bracket 05378E E00 to mount the lamps as side-entry lamps using a tube with a length of 1300 mm, d 42 mm (for pipe clamp R 1 1 / 2 ) for ceiling suspension of the lamp, 1 pair Pipe clamps 05897E00 with mounting rail for a variable mounting distance; Material: stainless steel R 1 1 / 4 (d 42 mm) Mounting set,,grid cable rack 09402E00 R 1 1 / 2 (d 48 mm) R 2 (d 60 mm) for grid cable racks, with a cable diameter of 6 mm; with mounting rail for a variable mounting distance; Material: stainless steel Ceiling and wallmounting bracket 04361E00 mounted on a mounting rail for a variable mounting distance; Material: stainless steel Lamp can be swiveled in steps of E00 1 pair Lighting /7

8 Accessories and spare parts Designation Figure Description Art. no. Weight kg Cable gland of moulded material, series E /5-M piece /5-M pieces Stopping plug 04840E /5-M /5-M25-17 of moulded material, series /3-M20 1 piece 8290/3-M /3-M25 x 1,5 8290/3-M25 1 piece 50 pieces 100 pieces 1 pieces 100 pieces Breathing gland 05703E00 for installation in lights; in moulded material; without counter nut Thread: M25 x pc Thread: M25 x pcs /8 Lighting

9 Dimensional Drawings (All Dimensions in mm) - Subject to Alterations Light fittings ECOLUX 6600, 18 W, 36 W, 58 W 04824E00 Dimensions Light fitting 18 W 36 W 58 W L L2 1) L3 2) ) Fixed mounting distance 2) Variable mounting distance Pipe clamp 04717E00 Mounting set grid cable rack 04822E E E00 Ceiling- and wall-mounting bracket Ceiling mounting bracket 04823E E E00 Wall mounting bracket for pole-mounting version Ring bolt Mounting clamp bracket Installation accessories We reserve the right to make alterations to the technical data, dimensions, weights, designs and products available without notice. The illustrations cannot be considered binding. Lighting /9