Load disconnect switch Series 8146/5-V11

Size: px
Start display at page:

Download "Load disconnect switch Series 8146/5-V11"

Transcription

1 Load disconnect switch > Motor switching capacity AC-3 and AC-23 acc. to DIN VDE 0660 part 107 IEC/EN > Isolating characteristics acc. to IEC/EN > Positive opening operation of the main > Available for rated operating s of 16 A to 630 A > Robust enclosure made of glass fibre reinforced polyester > Large handle, lockable, or / red colours > Degree of protection IP E00 load and motor switches are used as main connection switches for distribution units and motor circuits. The standard range of switches have rated operating s up to 80 A. Switches for higher rated operating s are designed and manufactured to order. ATEX Class I (NEC 505) (NEC 506) Class I Class II Class III Zone Zone Division For use in x x x x For use in x *) For use in x *) *) Special version on request Explosion Protection Global (IECEx) Gas and dust 8146/5: IECEx PTB /5: Ex d e ia/ib [iaga] mb q IIA, IIB, IIC T6, T5, T4 Gb 8146/5: Ex tb IIIA, IIIB, IIIC T80 C, T95 C, T130 C Db Europe (ATEX) Gas and dust 8146/5: PTB 01 ATEX /5: E II 2 G Ex d e ia ib [ia Ga] mb q IIA, IIB, IIC T6, T5, T4 Gb 8146/5: E II 2 D Ex tb IIIA, IIIB, IIIC T80 C, T95 C, T130 C Db IP66 (marking on rating plate possible) Certifications and certificates Certificates IECEx, ATEX, Kazakhstan (TR), Russia (TR), Belarus (TR) WebCode 8146M Load disconnect switches and motor starters /1

2 Selection Table Version Enclosure material 10 A, 3-pole 10 A, 3-pole + N Equipment Colour Additional device Cable dia. range [mm] Order number Reversing switches are available only in V11, not as safety switches V37. Design 10 A Degree of protection IP66 acc. to IEC/EN Enclosure cover V11: In switching position ON locked, in OFF position removable Handle Can be locked with 3 padlocks in 0-position Cable entries Standard: In polyamide, Series 8161 Special: In metal Main Rated operational 690 V AC Rated insulation 750 V Rated impulse 6 kv withstand Rated operational 10 A Switching capacity acc. to IEC/EN ; DIN VDE 0660, part 107 AC-3 U e I P 230 V ~ 400 V ~ 440 V ~ 10 A 10 A 10 A 2.2 kw 4.0 kw 4.0 kw 500 V ~ 10 A 5.5 kw 690 V ~ 10 A 7.5 kw Weight kg 8146/5-V , /5-V , /5-V , /5-V ,377 DC-1 DC-13 (L/R = 300 ms) U e I U e I 220 V 6 A 3) 230 V 0.4 A 1 conducting path 110 V 6 A 2 conducting paths in series 3) 3 conducting paths in series 60 V 6 A 24 V 10 A /2 Load disconnect switches and motor starters

3 Service life of electrical / mechanical parts Max. short-circuit protection Auxiliary Rated operating Rated operational Switch Terminals Type 8146/5-V operations 16 A, tripping characteristic: gg acc. to IEC/EN V AC 6 A 1 NO (ON delayed - OFF advanced) 2, mm 2 finely stranded / solid wire No. of poles max. [A] Conductor cross-section [mm 2 ] Main Auxiliary min. max. Engineering note: The maximum conductor cross-sections given were determined using the H07V. The minimum bending radius was assumed to be 4 x outer diameter in accordance with VDE only with heat-resistant cable > 70 C on cable entries or/and > 85 C on clamping points Grease: specified on rating plate Temperature class / perm. ambient temperature ,5 4 T6: C T6: C T5: C ,5 4 T6: C T6: C T5: C Load disconnect switches and motor starters /3

4 Selection Table Version Enclosure material 16 A, 3-pole 16 A, 3-pole + N Equipment Colour Additional device Cable dia. range [mm] with N-terminal 2 x Order number Reversing switches are available only in V11, not as safety switches V37. Design 16 A Degree of protection IP66 acc. to IEC/EN Enclosure cover V11: In switching position ON locked, in OFF position removable Handle Can be locked with 3 padlocks in 0-position Cable entries Standard: In polyamide, Series 8161 Special: In metal Main Rated operational 690 V AC Rated insulation 690 V Rated impulse 6 kv withstand Rated operational 16 A Weight kg 8146/5-V , /5-V , /5-V , /5-V , /5-V ,730 /4 Load disconnect switches and motor starters

5 Switching capacity acc. to IEC/EN ; DIN VDE 0660, part 107 AC-3 U e I P 230 V ~ 16 A 4.0 kw 400 V ~ 16 A 7.5 kw 440 V ~ 16 A 7.5 kw 500 V ~ 16 A 7.5 kw 690 V ~ 16 A 11.0 kw Service life of electrical / mechanical parts Max. short-circuit protection Auxiliary Rated operating Rated operational Switch Terminals Ambient conditions 16 A Type 8146/5-V..- DC-1, DC- DC-13 (L/R = 300 ms) 23 U e I U e I 220 V 16 A 3) 250 V 1.1 A 1 conducting path 120 V 16 A 125 V 2.2 A 2 conducting paths in series 3) 3 conducting paths in series 60 V 16 A 60 V 5.0 A operations 25 A, tripping characteristic: gg acc. to IEC/EN V AC 10 A 3-pole: 1 NO (ON delayed - OFF advanced) 6-pole: 2 NO (1 x ON delayed - OFF advanced / 1 x switching normally) mm 2 finely stranded / solid No. of poles max. [A] Conductor cross-section [mm 2 ] Engineering note: The maximum conductor cross-sections given were determined using the H07V. The minimum bending radius was assumed to be 4 x outer diameter in accordance with VDE only with heat-resistant cable > 70 C on cable entries or/and > 85 C on clamping points Grease: specified on rating plate Temperature class / Perm. ambient temperature Main Auxiliary min. max T6: C T6: C T5: C T6: C T6: C T5: C Load disconnect switches and motor starters /5

6 Selection Table Version Enclosure material 20 A, 3-pole 20 A, 3-pole + N Equipment Colour Additional device Cable dia. range [mm] (M3, (M3, (M3, (M3, Order number Reversing switches are available only in V11, not as safety switches V37. Design 20 A Degree of protection IP66 acc. to IEC/EN Enclosure cover V11: In switching position ON locked, in OFF position removable Handle Can be locked with 3 padlocks in 0-position Cable entries Standard: In polyamide, Series 8161 Special: In metal Main Rated operational 690 V AC Rated insulation 690 V Rated operational 20 A Switching capacity acc. to IEC/EN ; DIN VDE 0660, part 107 AC-3 U e I P 230 V ~ 20 A 5.5 kw 400 V ~ 20 A 7.5 kw 440 V ~ 20 A 11.0 W 500 V ~ 20 A 11.0 kw 690 V ~ 20 A 18.5 kw Weight kg 8146/5-V , /5-V , /5-V , /5-V ,815 Service life of electrical / mechanical parts DC-1, DC- DC-13 (L/R = 300 ms) 23 U e I U e I 220 V 20 A 3) 250 V 1.1 A 1 conducting path 120 V 20 A 125 V 2.2 A 2 conducting paths in series 3) 3 conducting paths in series 60 V 20 A 60 V 5.0 A operations /6 Load disconnect switches and motor starters

7 Max. short-circuit protection Auxiliary Rated operating Rated operational Terminals Ambient conditions 20 A Type 8146/5-V A, tripping characteristic: gg acc. to IEC/EN V AC 10 A mm 2 finely stranded / solid No. of poles max. [A] Conductor cross-section [mm 2 ] Engineering note: The maximum conductor cross-sections given were determined using the H07V. The minimum bending radius was assumed to be 4 x outer diameter in accordance with VDE only with heat-resistant cable > 70 C on cable entries or/and > 85 C on clamping points Grease: specified on rating plate Temperature class / Perm. ambient temperature Main Auxiliary min. max T6: C T5: C T5: C Load disconnect switches and motor starters /7

8 Selection Table Version Enclosure material 25 A, 3-pole 25 A, 3-pole + N 25 A, 6-pole Equipment Colour Additional device Cable dia. range [mm] (M3, (M3, with N-terminal 2 x (M3, (M3, (M3, 4 x x x x Order number Reversing switches are available only in V11, not as safety switches V37. Design 25 A Degree of protection IP66 acc. to IEC/EN Enclosure cover V11: In switching position ON locked, in OFF position removable Handle Can be locked with 3 padlocks in 0-position Cable entries Standard: In polyamide, Series 8161 Special: In metal Main Rated operational 690 V AC Rated insulation 690 V Rated operational 25 A Weight kg 8146/5-V , /5-V , /5-V , /5-V , /5-V , /5-V , /5-V ,839 /8 Load disconnect switches and motor starters

9 Switching capacity acc. to IEC/EN ; DIN VDE 0660, part 107 AC-3 AC-23 U e I P I P 230 V ~ 25 A 5.5 kw 400 V ~ 25 A 11.0 kw 440 V ~ 25 A 11.0 kw 500 V ~ A 15.0 kw V ~ 25 A 22.0 kw Service life of electrical / mechanical parts Max. short-circuit protection Auxiliary Rated operating Rated operational Terminals Ambient conditions 25 A Type 8146/5-V operations 35 A, tripping characteristic: gg acc. to IEC/EN V AC 10 A mm 2 finely stranded / solid No. of poles max. [A] Conductor cross-section [mm 2 ] Main DC-1, DC- DC-13 (L/R = 300 ms) 23 U e I U e I 220 V 25 A 3) 250 V 1.1 A 1 conducting path 120 V 25 A 125 V 2.2 A 2 conducting paths in series 3) 3 conducting paths in series 60 V 25 A 60 V 5.0 A Auxiliary Engineering note: The maximum conductor cross-sections given were determined using the H07V. The minimum bending radius was assumed to be 4 x outer diameter in accordance with VDE only with heat-resistant cable > 70 C on cable entries or/and > 85 C on clamping points Grease: specified on rating plate min. max. Temperature class / Perm. ambient temperature T6: C T5: C T5: C T6: C T5: C T5: C T6: C T5: C T5: C T6: C T5: C T5: C T6: C T5: C T5: C T5: C T5: C T5: C T5: C T5: C Load disconnect switches and motor starters /9

10 Selection Table Version Enclosure material 40 A, 3-pole 40 A, 3-pole + N 40 A, 6-pole Equipment Colour Additional device Cable dia. range [mm] 2 x (M40), 1 x x (M40), 1 x x (M40), 1 x x (M40), 1 x x (M40), 1 x x (M40), 1 x Order number Reversing switches are available only in V11, not as safety switches V37. Design 40 A Degree of protection IP66 acc. to IEC/EN Enclosure cover V11: In switching position ON locked, in OFF position removable Handle Can be locked with 3 padlocks in 0-position Cable entries Standard: In polyamide, Series 8161 Special: In metal Main Rated operational 690 V AC Rated insulation 750 V Rated operational 40 A Weight kg 8146/5-V K 5, /5-V K 5, /5-V K 7, /5-V K 7, /5-V K 9, /5-V K 9,000 /10 Load disconnect switches and motor starters

11 Switching capacity acc. to IEC/EN ; DIN VDE 0660, part 107 AC-3 U e I P 240 V ~ 40 A 11.0 kw 400 V ~ 40 A 22.0 kw 440 V ~ 40 A 22.0 kw 500 V ~ 40 A 22.0 kw 690 V ~ 40 A 37.0 kw Service life of electrical / mechanical parts Max. short-circuit protection Auxiliary Rated operating Rated operational Terminals Ambient conditions 40 A Type 8146/5-V operations 80 A, tripping characteristic: gg acc. to IEC/EN V AC 6 A mm 2 finely stranded / solid No. of poles max. [A] Conductor cross-section [mm 2 ] Main DC-23, DC- 1 U e I 220 V 40 A 3) 1 conducting path 120 V 40 A 2 conducting paths in series 3) 3 conducting paths in series 60 V 40 A Auxiliary Engineering note: The maximum conductor cross-sections given were determined using the H07V. The minimum bending radius was assumed to be 4 x outer diameter in accordance with VDE only with heat-resistant cable > 70 C on cable entries or/and > 85 C on clamping points Grease: specified on rating plate min. max. Temperature class / Perm. ambient temperature K T6: C T6: C T5: C K T6: C T6: C T5: C K T6: C T5: C T5: C Load disconnect switches and motor starters /11

12 Selection Table Version 63 / 80 A, 3-pole 63 / 80 A, 3-pole + N 63 / 80 A, 6-pole Enclosure material Equipment Colour Additional device Cable dia. range [mm] 2 x (M50), 2 x (M50), 2 x (M50), 2 x (M50), 4 x (M50), 4 x (M50), Order number Reversing switches are available only in V11, not as safety switches V37. Weight kg 8146/5-V K 5, /5-V K 5, /5-V K 7, /5-V K 7, /5-V , /5-V ,473 Design 63 / 80 A Degree of protection IP66 acc. to IEC/EN Enclosure cover V11: In switching position ON locked, in OFF position removable Handle Can be locked with 3 padlocks in 0-position Cable entries Standard: In polyamide, Series 8161 Special: In metal Main Rated operational 500 V AC (80 A) / 690 V AC (63 A) Rated insulation 750 V Rated operational 63 / 80 A Switching capacity acc. to IEC/EN ; DIN VDE 0660, part 107 AC-3 AC-3 U e I P I P 230 V ~ 400 V ~ 440 V ~ 500 V ~ 690 V ~ 63 A 63 A 63 A 63 A 63 A 18.5 kw 30.0 kw 37.0 kw 37.0 kw 55.0 kw 80 A 80 A 80 A 80 A 22.0 kw 45.0 kw 45.0 kw 55.0 kw DC-23, DC- 1 U e I 220 V 80 A 3) 1 conducting path 120 V 80 A 2 conducting paths in series 3) 3 conducting paths in series 60 V 80 A /12 Load disconnect switches and motor starters

13 Service life of electrical / mechanical parts Max. short-circuit protection Auxiliary Rated operating Rated operational Terminals Ambient conditions 63 / 80 A Type 8146/5-V operations 63 A: 125 A, 80 A: 160 A, tripping characteristic: gg according to IEC/EN V AC 6 A mm 2 finely stranded / solid No. of poles max. [A] Conductor cross-section [mm 2 ] Main Auxiliary Engineering note: The maximum conductor cross-sections given were determined using the H07V. The minimum bending radius was assumed to be 4 x outer diameter in accordance with VDE only with heat-resistant cable > 70 C on cable entries or/and > 85 C on clamping points Grease: specified on rating plate min. max. Temperature class / Perm. ambient temperature K T6: C T6: C T5: C T6: C T5: C T5: C K T6: C T5: C T6: C T5: C T6: C T5: C T5: C T6: C T5: C T5: C T6: C T5: C T6: C T5: C T6: C T5: C T5: C T6: C T5: C We reserve the right to make alterations to the technical data, dimensions, weights, designs and products available without notice. The illustrations cannot be considered binding. Load disconnect switches and motor starters /13

14 Dimensional drawings (all dimensions in mm) - subject to alterations B C A Circuit diagrams 04120E00 Dimensions [mm] A B C pole 10 A 8146/5-V /5-V A 8146/5-V /5-V /5-V A 8146/5-V /5-V A 8146/5-V /5-V /5-V A 8146/5-V K /5-V K / 80 A 8146/5-V K /5-V K pole 25 A 8146/5-V A 8146/5-V K / 80 A 8146/5-V E E00 -V pole + 1 NO (1x ON delayed - OFF leading / 1 x switching normally) -V pole N E00 N E00 -V pole + N -V pole + N ( 3) 5 7 (9) (8) (10) 12196E E00 -V V pole reversing switch -V pole /14 Load disconnect switches and motor starters

15 Accessories and Spare Parts Designation Figure Description Art. no. Weight Auxiliary contact 2 NC (8080/1-3) NC contact + 1 NO contact (8080/ kg 12446E00 2 NO (8080/1-4) The switching function of the auxiliary contact depends on the installation slot used. Left: delayed (ON), leading (OFF); Right: synchronising Left and right: synchronising Note: The auxiliary can only be retrofitted for 40 A and 63/80 A versions. For all other versions, the auxiliary contact must be ordered separately when placing the order. Retrofitting is not possible for this. Auxiliary contact key for removing the mounted auxiliary contact E00 Load disconnect switches and motor starters /15

Safety Switches Series 8537

Safety Switches Series 8537 Safety Switches www.stahl.de > 3- and 6-pole switches 12 / 16, 25, 40, 63 / 80, 125 / 160, 250, 315, 400, 500 A > Motor switching capacity AC-3 and AC-23 acc. to IEC 60947-3, EN 60947, DIN VDE 0660 part

More information

Plugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8581

Plugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8581 www.stahl.de > Various versions Extra-low voltage up to 16 A 16, 32, 125 A > Large handle, can be locked in position 0 and I > Clear switch position indication > Optimal contact by means of self-cleaning

More information

Plug and Socket Devices SolConeX 16 A Series 8570

Plug and Socket Devices SolConeX 16 A Series 8570 Plug and Socket Devices SolConeX 16 A Series 8570 www.stahl.de > Switch socket / plug 16 A > Minimal force required to insert and remove > Can be optionally equipped with an auxiliary contact for control

More information

Control switch/load disconnect switch Series 8008

Control switch/load disconnect switch Series 8008 > s Control switch with 2, 3 or 4 pole Load switch 3 pole + 1 auxiliary contact > Rated operational voltage up to 690 V AC > Positive opening contacts > Contacts suitable for EM-STOP > Isolating characteristics

More information

Plugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8581

Plugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8581 www.stahl.de > Various versions 16 A, extra-low voltage 16, 32, 125 A > Large handle, can be locked in position 0 and 1 > Clear switch position indication > Optimal contact by means of self-cleaning laminated

More information

Plugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8581

Plugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8581 Series 8570, 8571, 8575, 8581 www.stahl.de > Various versions 16 A, extra-low voltage 16, 32, 125 A > Large handle, can be locked in position 0 and 1 > Clear switch position indication > Optimal contact

More information

Control Buttons / Switches for Panel Mounting Series 8003

Control Buttons / Switches for Panel Mounting Series 8003 www.stahl.de > Different actuators pushbutton mushroom pushbutton mushroom stay-put button mushroom stay-put button with key lock key-operated button key-operated switch > 2 contact elements > Spring clamp

More information

Plugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8579, 8581

Plugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8579, 8581 Plugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8579, 8581 www.stahl.de > Various versions 16 A, extra-low voltage 16, 32, 63, 125 A > Large handle, can be locked in position 0 and 1 > Clear

More information

Load and Motor Switches, Load-Break Switches Series 8544

Load and Motor Switches, Load-Break Switches Series 8544 www.stahl.de > Innovative switch concept > State-of-the-art contact arrangement > Easy and clear connection technology > Wiring channel for auxiliary contacts > Retrofittable: alligator clip auxiliary

More information

Load and Motor Switches, Load-Break Switches Series 8544

Load and Motor Switches, Load-Break Switches Series 8544 www.stahl.de > Innovative switch concept > State-of-the-art contact arrangement > Easy and clear connection technology > Wiring channel for auxiliary contacts > Retrofittable: Alligator clip Auxiliary

More information

Load and Motor Switches, Load-Break Switches Series 8549

Load and Motor Switches, Load-Break Switches Series 8549 www.stahl.de > Innovative switch concept > State-of-the-art contact arrangement > Easy and clear connection technology > Wiring channel for auxiliary contacts > Retrofittable: Pick-off terminal block Auxiliary

More information

Plugs and Sockets SolConeX & CES Series 7570, 7571, 7575, 7579, 7581

Plugs and Sockets SolConeX & CES Series 7570, 7571, 7575, 7579, 7581 Plugs and Sockets SolConeX & CES Series 7570, 7571, 7575, 7579, 7581 www.stahl.de > For use in Zones 2 and 22 > Various versions 16 A, extra-low voltage 16, 32, 63, 125 A > Large handle, can be locked

More information

Position Switches Series 8074/2

Position Switches Series 8074/2 www.stahl.de > Ex e metal enclosure > Operating temperature range -40 C... +70 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 > Extensive assortment of actuators,

More information

Terminal Boxes Series 8125

Terminal Boxes Series 8125 Series > Wide product range > Enclosure of electropolished stainless steel.0 (AISI L) or galvanised steel sheet painted > basic enclosure sizes various heights > Fitted according to the customer's requirements

More information

Position Switches Series 8060/2

Position Switches Series 8060/2 www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50047 > Degree of protection IP66 / IP67 > Extensive assortment of

More information

Position Switches Series 8070/2

Position Switches Series 8070/2 www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 / IP67 > Extensive assortment of

More information

10 Load and Motor Switchgear

10 Load and Motor Switchgear 10 Load and Motor gear Safety es 01941E00 Safety switches ensure the obligatory isolation of electrical power under condition of equipment cleaning, maintenance and repair. Other methods of isolation,

More information

Terminal Boxes Series 8125

Terminal Boxes Series 8125 Series > Wide product range > Enclosure of electropolished stainless steel.0 (AISI L) or galvanised steel sheet > basic enclosure sizes various heights > Fitted according to the customer's requirements

More information

Light Fitting for Fluorescent Lamps Series ECOLUX 6600

Light Fitting for Fluorescent Lamps Series ECOLUX 6600 > 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series

More information

Linear Luminaire for Fluorescent Lamps Series ECOLUX 6600

Linear Luminaire for Fluorescent Lamps Series ECOLUX 6600 > 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series 6600

More information

Control Buttons Series 8082

Control Buttons Series 8082 www.stahl.de > Contact element with 1 NO contact 1 NC contact, positive opening > Contact material silver-nickel or gold-plated > 9 different actuators Push Mushroom push Selector switch Rotary actuator

More information

Emergency Light Fitting for Fluorescent Lamps Series 6009

Emergency Light Fitting for Fluorescent Lamps Series 6009 > As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or

More information

Linear luminaire with LED Series EXLUX 6002

Linear luminaire with LED Series EXLUX 6002 > latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking > All-pole disconnection by means of an N/C switch

More information

Linear Luminaire with LED Series EXLUX 6002

Linear Luminaire with LED Series EXLUX 6002 > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking > All-pole disconnection by means of an N/C switch

More information

Floodlight LED Series 6125

Floodlight LED Series 6125 www.stahl.de > Floodlight Zones 1, 2 and 21, 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Enclosure made of sheet steel single powder coated

More information

Emergency Luminaire with LED Series EXLUX 6009/1 Version IIC

Emergency Luminaire with LED Series EXLUX 6009/1 Version IIC > For use in hazardous areas with gas group IIC > Emergency luminaire for wall, ceiling, pendant or pole installation > Latest LED technology with a high luminous efficacy and a long service life > Central

More information

Linear Luminaire for Fluorescent Lamps Series EXLUX 6401

Linear Luminaire for Fluorescent Lamps Series EXLUX 6401 > As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp

More information

5.1. GHG 26 / EXKO 2.. Ex-Safety Switches Rated current from 10 A A

5.1. GHG 26 / EXKO 2.. Ex-Safety Switches Rated current from 10 A A .1 GHG 26 / EXKO 2.. Ex-Safety Switches Rated current from 10 A - 630 A Safety for your protection CEAG safety switches can be protected against inadvertent switching on by our integrated locking facility

More information

Linear Luminaire for Fluorescent Lamps Series EXLUX 6001

Linear Luminaire for Fluorescent Lamps Series EXLUX 6001 > As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened

More information

Linear Luminaire with LED Series EXLUX 6002/2 Version IIC

Linear Luminaire with LED Series EXLUX 6002/2 Version IIC > For use in hazardous areas with gas group IIC > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking

More information

Linear Luminaire with LED Series EXLUX 6402/2

Linear Luminaire with LED Series EXLUX 6402/2 > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the

More information

Emergency Light Fitting for Fluorescent Lamps Series EXLUX 6008 / 6408

Emergency Light Fitting for Fluorescent Lamps Series EXLUX 6008 / 6408 > As pendant light fitting or side entry lamp > Version with 2 lamps: 18 W and 36 W > Central locking > Weekly functional test > Light duration test of the emergency lighting once a year www.stahl.de 10068E00

More information

Light Fitting for Fluorescent Lamps Series ECOLUX 6600

Light Fitting for Fluorescent Lamps Series ECOLUX 6600 > 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series

More information

Ex UPS standard Series 8265

Ex UPS standard Series 8265 > Guard battery monitoring according to IEC/EN 60079 et seq. > Adjustable buffer time > Battery function test > Potential-free signal outputs > Maximum efficiency > Increased for reliable triggering of

More information

Linear Luminaire for Fluorescent Lamps Series ECOLUX METAL 6010/1

Linear Luminaire for Fluorescent Lamps Series ECOLUX METAL 6010/1 > For use in Zones 1, 2, 21, 22 and safe area > 2-lamp version: 18 W 36 W > Housing made of sheet steel or stainless steel SS304 / > Quick fasteners www.stahl.de 15709E00 The light fittings of Series ECOLUX

More information

Emergency Luminaire with LED Series EXLUX 6409/1

Emergency Luminaire with LED Series EXLUX 6409/1 > Emergency luminaire for wall, ceiling, pendant or pole installation > Latest LED technology with a high luminous efficacy and a long service life > Central locking system > Weekly functional test > Annually

More information

Emergency Light Fitting for Fluorescent Lamps Series ECOLUX 6608 Economy

Emergency Light Fitting for Fluorescent Lamps Series ECOLUX 6608 Economy www.stahl.de > For fluorescent lamps 2 x 18 W and 2 x 36 W > Electronic ballast with integrated emergency light electronics > Battery is integrated in the lamp enclosure > For emergency light mode 1.5

More information

Metal Position Switch Series 8074

Metal Position Switch Series 8074 > Dimensions and characteristic values according to EN 50041 > Replaceable contact element in flameproof enclosure > Positive opening contacts > Wide range of actuators > All actuators can be displaced

More information

Floodlight LED Series 6525

Floodlight LED Series 6525 www.stahl.de > Floodlight Zones 2, 21 and 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Standard enclosure made of single-coated stainless

More information

Compact Sheet-Steel Light Fittings Series 6114/1

Compact Sheet-Steel Light Fittings Series 6114/1 > As 1- or 3-lamp version > Versions Pendant fitting Wall-mounting fitting Flush mounted fitting > Powder-coated steel or stainless steel > Central lock > All pole disconnection via NC switch in positive

More information

Tubular Light Fitting with LED Series 6036

Tubular Light Fitting with LED Series 6036 > Extremely robust luminaire design for rough ambient conditions > Very lightweight and vibration resistant LED light fitting > Extremely long service life due to high power LEDs used including driver

More information

Light Fittings for Fluorescent Lamps Series EXLUX 6000 / 6400

Light Fittings for Fluorescent Lamps Series EXLUX 6000 / 6400 > As pendant light fitting or side entry lamp > Version with 1 or 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened > End of life

More information

Floodlight Series 6121

Floodlight Series 6121 www.stahl.de Floodlight > For use in gas group IIC (-20 C... +C) gas group IIB + H 2 (-C... +C) > Material Enclosure in seawater resistant cast aluminium Mounting components in stainless steel > Lamp options

More information

LED Linear Luminaire Series EXLUX 6402

LED Linear Luminaire Series EXLUX 6402 > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the

More information

Control Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België

Control Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België Control Equipment 01616E00 Position switches are used to monitor the position of moving parts of machines and plant. Can be used in safety circuits, as the device satisfies EN 60 947-5-1/DIN VDE 0660 part

More information

11 Control Panels, Distribution Panels and Components

11 Control Panels, Distribution Panels and Components Control Panels, Distribution Panels and Components Motor Switches Explosion protection to CENELEC IEC For use in Zone and Zone Isolator Motor switching capacity Rated working voltage up to Rated working

More information

E II 3 (1) G Ex na [ia Ga] IIC/IIB T4 Gc

E II 3 (1) G Ex na [ia Ga] IIC/IIB T4 Gc 900/77-80-094-001 158877 For the intrinsically safe operation of a wide range of devices, such as HART transmitters, solenoid valves, sensors, zero-potential contacts and many more compact, space-saving

More information

Floodlight LED Series 6525

Floodlight LED Series 6525 www.stahl.de > Floodlight Zones 2, 21 and 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Standard enclosure made of sheet steel single powder

More information

Compact Sheet-steel Emergency Light Fitting Series 6118/1

Compact Sheet-steel Emergency Light Fitting Series 6118/1 www.stahl.de Compact Sheet-steel Emergency Light Fitting > Electronic ballast with integrated emergency light electronics for emergency light mode in case of power failure, charging of battery and automatic

More information

I Ex-safety switches I

I Ex-safety switches I EMERGENCY STOP EMERGENCY STOP Technical data Ex-safety switches 12 A Marking accd. to 94/9/EC II 2 G Ex de IIC T6 / II 2 D Ex td A21 IP66 T80 C EC-Type Examination Certificate PTB 99 ATEX 1164 PTB 00 ATEX

More information

Battery Boxes Series 8316

Battery Boxes Series 8316 www.stahl.de > Back-up power supply > Maintenance-free batteries > Low self-discharge > Extremely low gas emissions > Electrolyte-tight > No acid surface coating > Protection against total disch arge >

More information

Portable Lamps Series HS6145, HSL145

Portable Lamps Series HS6145, HSL145 www.stahl.de > Portable Lamps Series HS6145 > Comply with requirements of Fire Department standard DIN 14462 > Battery state display > Open circuit monitor > Light intensity 15.000 cd after 4 hours use

More information

I Ex-Safety switches I

I Ex-Safety switches I 3-pole, 20 A Technical data Ex-Safety switch 20 A for variable-speed three-phase drives Marking to 94/9/EC II 2 G Ex ed ia IIC T6 / II 2 D Ex td A21 IP66 T80 C EC-Type Examination Certificate PTB 99 ATEX

More information

Floodlight Series 6521/4

Floodlight Series 6521/4 > The enclosure made of stainless steel V4A, V2A or powder coated sheet steel is available > Broad or narrow beam reflectors and/or asymmetrical lamp fitting > Series 6521/3 explosion protected floodlight

More information

8150 Series Terminal Boxes

8150 Series Terminal Boxes 8150 Series Terminal Boxes TEMINATION eady-term 8150 Terminal Boxes Features Enclosures made of stainless (AISI 304) or (AISI 316L) Optional hinges with cam locks or screws cover Hinged Versions 130 opening

More information

Control Device System NEC Series ConSig 8040

Control Device System NEC Series ConSig 8040 16113E00 > Enclosure made of glass fibre reinforced polyester resin > Modular design > 3 sizes available > Individual units can be combined into larger units > Standard and customer-specific versions >

More information

Sheet-Steel Light Fittings Series 6014 / 6414

Sheet-Steel Light Fittings Series 6014 / 6414 > As 1-, 2-, 3- or 4-lamp version > Versions pendant light fittngs wall-mounting s recessed s > Powder-coated sheet-steel or stainless steel > Central lock > All-pole disconnection via NC switch in positive

More information

Compact Emergency Light Fittings Series C-LUX 6108 / 6508

Compact Emergency Light Fittings Series C-LUX 6108 / 6508 > Operating modes non-maintained operation non-maintained operation with switchable emergency light blocking > With continous operating test > For fluorescent lamps 8 W, d 16 mm, for two-pin holder G5

More information

Compact Emergency Light Fittings Series C-LUX 6108 / 6508

Compact Emergency Light Fittings Series C-LUX 6108 / 6508 > Operating modes non-maintained operation non-maintained operation with switchable emergency light blocking > With continous operating test > For fluorescent lamps 8 W, d 16 mm, for two-pin holder G5

More information

Operating Instructions

Operating Instructions Operating Instructions Load and Motor Switch, Load-Break Switch > 8544/1 Contents 1 Contents 1 Contents...2 2 General Information...2 3 General Safety Instructions...3 4 Designated Use...4 5 Technical

More information

Linear fluorescent luminaire LED V-CG-S

Linear fluorescent luminaire LED V-CG-S (2 x 3 W) Linear fluorescent luminaire LED V-CG-S Completely monitored explosion-protected LED light Await live of the LED module from 75.000 hours Different luminous colours available 4000 K / 5600 K

More information

Terminal Boxes Series 8252/1

Terminal Boxes Series 8252/1 www.stahl.de > Ex d enclosure made of saltwater-resistant, copper-free aluminium cast alloy > Powder coated to RAL 7032 > Available in 3 different sizes > With DIN rail for standard terminals > Enclosure

More information

Compact Sheet-Steel Light Fittings Series 6114

Compact Sheet-Steel Light Fittings Series 6114 > As 1-, 2- oder 3-lamp version > Versions Pendant fitting Wall-mounting fitting Flush mounted fitting > Powder-coated steel or stainless steel > Central lock > All pole disconnection via NC switch in

More information

I Ex-safety switches I

I Ex-safety switches I 3-pole, 20 A Technical data Ex-safety switches 20 A for controlled three-phase drives Marking accd. to 94/9/EC II 2 G Ex ed ia IIC T6 / II 2 D Ex td A21 IP66 T80 C EC-Type Examination Certificate PTB 99

More information

HTSB system System overview

HTSB system System overview HTSB system System overview Easy planning of heating circuits Simple installation on site Wide operating temperature range The BARTEC HTSB heating system covers a wide range of applications in trace heating.

More information

2.4. Ex-Emergency light fittings with a self-contained battery system for fluorescent lamps

2.4. Ex-Emergency light fittings with a self-contained battery system for fluorescent lamps .4 Ex-Emergency light fittings with a self-contained battery system for fluorescent lamps ellk 18/18 NE / ellk 36/36 NE / ellm 18/18 NE (Zone 1,, 1, ) If you need a reliable and decentralized emergency

More information

Emergency Light Fittings for Fluorescent Lamps Series ECOLUX 6608

Emergency Light Fittings for Fluorescent Lamps Series ECOLUX 6608 > For fluorescent lamps 2 x 18 W and 2 x 36 W > For emergency light operation periods of 1.5 or 3 hrs > During emergency time: If emergency lamp broken changing to the other lamp > Battery case which can

More information

EX-D ENCLOSURES AND DISTRIBUTIONS

EX-D ENCLOSURES AND DISTRIBUTIONS EX-D ENCLOSURES AND DISTRIBUTIONS Series GHG made of metal for gases of explosion group IIC To use MCBs, fuses, contactors etc. which give off arcs in potentially hazardous areas, they must be integrated

More information

Main current switches >180 A are realized in metal enclosures. Internationally approved.

Main current switches >180 A are realized in metal enclosures. Internationally approved. E X - M A I N C U R R E N T S W I T C H E S 10 A - 80 A (up to 630 A) CEAG main current switches in a number of versions can be protected against inadvertent switching on by our integrated locking facility

More information

Operating Instructions

Operating Instructions Operating Instructions Terminal Box > 8150/1 > 8150/2 Contents 1 Contents 1 Contents...2 2 General Information...2 2.1 Manufacturer...2 2.2 Operating Instructions Information...2 3 Intended Use...2 4 Safety

More information

M-0. M-0... series control, monitoring and signalling devices. Ex e

M-0. M-0... series control, monitoring and signalling devices. Ex e M-0 The new Cortem M-0 series control, monitoring and signalling devices are installed as external accessories on '' enclosures and boards used in any industrial environment where an explosive atmosphere

More information

SPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot

SPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot SPOOL VALVES operated / to / tapped body and NAMUR for integrated pilot ATEX /-/ Series - FEATURES The valves offer environmental protection against the ingress of liquids, dusts or other foreign matter

More information

7 Lighting Technology

7 Lighting Technology 7 Lighting Technology Light Fittings for Fluorescent Lamps Series EXLUX 6400 (Zones 2, 21 & 22) As pendant or pole-mounting fittings With electronic ballast For two-pin fluorescent lamps 1 or 2 lamp versions:

More information

J: Emergency lighting (optional) L: pole type X: ceiling type Mounting

J: Emergency lighting (optional) L: pole type X: ceiling type Mounting Lighting Technology Light Fittings for Fluorescent Lamp BAY1-Q Series Explosion-proof Light Fittings for Fluorescent Lamp Explosion protection to -CENELEC -IEC -NEC Can be used in Zone 1 and Zone Zone

More information

Index. Manual Motor Starters 1. Auxiliary Contact Blocks 1. Trip Alarm Auxiliary 1. Switch. Shunt Release 1. Under-voltage Release 2.

Index. Manual Motor Starters 1. Auxiliary Contact Blocks 1. Trip Alarm Auxiliary 1. Switch. Shunt Release 1. Under-voltage Release 2. Index Index Page Manual Motor Starters 1 Auxiliary Contact Blocks 1 Trip Alarm Auxiliary 1 Switch Shunt Release 1 Under-voltage Release 2 Accessories 2 Busbar Connectors 2 Enclosures 2 Leistung, kw C mv

More information

7 Lighting Technology

7 Lighting Technology 7 Lighting Technology Compact Emergency Light Fittings C-LUX 6108 (Zones 1 & 2, 21 & 22) C-LUX 6508 (Zones 2, 22) 01908E00 Series C-LUX 6108 and 6508 compact emergency lighting fitting can be used for

More information

Tank Inspection Lights Series 6122

Tank Inspection Lights Series 6122 > For halogen lamps 5 W to 100 W > Mounting options tilting hinge mounting bracket flange collar > Corrosion-resistant light metal enclosure > Connection options potted connection lead connection www.stahl.de

More information

D509E. Manual Motor - Starters

D509E. Manual Motor - Starters D509E Manual Motor - Starters Index Page Manual Motors Starters 182 Auxilliary Contact Blocks 182 Trip Alarm Aux. Switch 182 Shunt Release 182 Under-voltage Release 183 Accessories 183 Busbar Connectors

More information

INSTRUCTION MANUAL (ATEX / IECEx)

INSTRUCTION MANUAL (ATEX / IECEx) INSTRUCTION MANUAL (ATEX / IECEx) BExBG10D-P and BExBG15D-P Flameproof Xenon Beacons For use in Flammable Gas and Dust Atmospheres BExBG10D-P / BExBG15D-P 1) Warnings DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE

More information

Internationally approved.

Internationally approved. E X - M A N U A L M O T O R S T A R T E R S Up to 2 A Motors have to be protected against over loads, phase failures and overheating: CEAG s power circuit breaker and manual motor starter features phase-failure

More information

Sheet Steel Emergency Light Fitting Series 6018

Sheet Steel Emergency Light Fitting Series 6018 > For an operating duration of 1.5 or 3 h > Operating modes Continuous operation Continuous operation with switchable emergency light blocking > Weekly functional test > Total discharge protection and

More information

I 16A 2-pole up to 50 V I I 16A 3-pole up to 50 V I

I 16A 2-pole up to 50 V I I 16A 3-pole up to 50 V I I 6A 2-pole up to 50 V I I 6A 3-pole up to 50 V I Flange socket Coupler Technical data Ex-plugs and receptacles for low voltage, 2- and 3-pole acc. to IEC 60309-/2 Marking accd. to 94/9/EC II 2 G Ex de

More information

1/122 Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,

1/122 Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax , 1/122 Explosion Protected Safety Luminaire and Escape Sign Luminaires Approved for explosive areas with gas explosion-hazard zones 1 and 21 as well as dust explosion-hazard zones 2 and 22 High IP66 protection

More information

PLUGS & RECEPTACLES. INNOVATIVE EXPLOSION PROTECTION by R. STAHL

PLUGS & RECEPTACLES. INNOVATIVE EXPLOSION PROTECTION by R. STAHL Series Features: Color coding and pin configuration makes it physically impossible to mate plugs and receptacles of different voltages and current ratings (per IEC 60 309-2). Interlocked switch mechanism

More information

7 Lighting Technology

7 Lighting Technology 7 Lighting Technology Pendant Light Fitting IEC 10560E00 For use in Zone 2 Zone 21 and Zone 22 Three sizes are available size 1 up to 150 W size 2 up to 250 W size 3 up to 600 W Available light sources

More information

BETA Switching Switches and Light Indicators

BETA Switching Switches and Light Indicators Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET

More information

Operating Instructions

Operating Instructions Operating Instructions Pendant Light Fitting > Contents 1 Contents 1 Contents...2 2 General Information...2 3 General Safety Instructions...3 4 Conformity to Standards...3 5 Intended Field of Application...3

More information

Ex m Solenoid Operator Type 0519

Ex m Solenoid Operator Type 0519 nass magnet GmbH Eckenerstrasse 4-6 D-30179 Hannover Doc. No. 113-720-0002 Revision No. 2 01.06.2015 Ex m Solenoid Operator Type 0519 Operating Instructions Dear Customer! To ensure the function and for

More information

Terminal Boxes Series 8146

Terminal Boxes Series 8146 Series > Enclosures in shock-resistant glass fibre reinforced polyester resin > basic enclosure sizes various heights > Fitted according to the customer's requirements > For terminals up to max. 00 mm

More information

ANKERSMID Temperature controller ATC 510/520/525 for wall-mounting. Application

ANKERSMID Temperature controller ATC 510/520/525 for wall-mounting. Application 2-3.1 ATC 510/520/525 for wall-mounting Application The ATC 510/5205/525 is a modern microprocessor-based (PID) control device featuring easy handling and a digital display. The clear design of the operator

More information

Cable resistance thermometer Model TR40

Cable resistance thermometer Model TR40 Electrical temperature measurement Cable resistance thermometer Model TR40 WIKA data sheet TE 60.40 for further approvals see page 2 Applications For direct installation into the process Machine building

More information

Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,

Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax , E X - M A N U A L M O T O R S T A R T E R S Up to A Motors have to be protected against over loads, phase failures and overheating: CEAG's power circuit breaker and manual motor starter features phase-failure

More information

Flameproof - Group IIB or IIB + H 2 Carbon steel - DE8BC series. Painted steel. -40 C or -20 C C or +50 C or +60 C

Flameproof - Group IIB or IIB + H 2 Carbon steel - DE8BC series. Painted steel. -40 C or -20 C C or +50 C or +60 C Enclosures Flameproof - Group IIB or IIB + 2 Carbon steel - DE8BC series The flameproof control cabinets DE8BC are designed for the control, automation, distribution boards, motor starters or any other

More information

The cover screws and all other external metal parts are made of stainless steel (AISI 316L). International approvals

The cover screws and all other external metal parts are made of stainless steel (AISI 316L). International approvals E X - J U N C T I O N B O X Plastic version for Zone 1,, 1 and The robust junction boxes made of plastic and light alloy are featured by their simple mounting and installation capability and their design.

More information

Explosion protection. Air + combustible gas + ignition source = explosion. Air + combustible dust + ignition source = explosion

Explosion protection. Air + combustible gas + ignition source = explosion. Air + combustible dust + ignition source = explosion Ex-protection Explosion protection Valves for fluid technology for use in explosion hazard areas Explosion protection for gas, dust and mining Flameproof enclosures and intrinsic safety Solutions for all

More information

INSTRUCTION MANUAL (ATEX / IECEx)

INSTRUCTION MANUAL (ATEX / IECEx) INSTRUCTION MANUAL (ATEX / IECEx) BExBGL2D LED BEACON For use in Flammable Gas and Dust Atmospheres BExBGL2D 1) Warnings DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT DO NOT OPEN WHEN ENERGIZED POTENTIAL

More information

Terminal Boxes in Stainless Steel SLS**.T

Terminal Boxes in Stainless Steel SLS**.T Features Variant options Stainless steel enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 6 enclosure size options Various terminal and cable gland configurations

More information

ALUMINIUM AND STAINLESS STEEL ENCLOSURES - EJB... SERIES

ALUMINIUM AND STAINLESS STEEL ENCLOSURES - EJB... SERIES Ex d IIB+H 2 ALUMINIUM AND STAINLESS STEEL ENCLOSURES - EJB... SERIES ALUMINIUM ENCLOSURES STAINLESS STEEL ENCLOSURES EJB... series enclosures offer Ex d IIB +H 2 mode of protection. These enclosures are

More information

Linear Luminaire for Fluorescent Lamps

Linear Luminaire for Fluorescent Lamps Linear Luminaire for Fluorescent Lamps Operating instructions Additional languages www.stahl-ex.com General Information Contents 1 General Information...2 1.1 Manufacturer...2 1.2 Information regarding

More information

PXN12C DXN25C DXN37C MULTI-CONTACT CONNECTORS 10 A TECHNICAL FEATURES

PXN12C DXN25C DXN37C MULTI-CONTACT CONNECTORS 10 A TECHNICAL FEATURES PXN12C DXN25C DXN37C MULTI-CONTACT CONNECTORS II2 G D Ex e ia or ib IIC FROM 12 TO 37 CONTACTS LOCKING IN CONNECTED OR DISCONNECTED POSITION CORROSION-FREE METAL CASING TECHNICAL FEATURES PXN12C DXN25C

More information