BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES

Size: px
Start display at page:

Download "BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES"

Transcription

1 BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES ST WALL-MOUNTING BOXES WITH BLANK DOOR STP WALL-MOUNTING BOXES WITH PLEXI DOOR ST/STP COMPLEMENTARY ACCESSORIES SDV TERMINAL BOXES WITH SCREWED COVER SDF TERMINAL BOXES WITH FLANGES SDVX TERMINAL BOXES WITH PLEXI COVER SDVX-B SYSTEM PLUS TERMINAL BOXES SDP TERMINAL BOXES WITH DOOR SD COMPLEMENTARY ACCESSORIES

2 ST and SD BOXES FEATURES 1 Wide range of dimensions: over 0 enclosures with plain door,19 models with glazed door, enclosures with single plain door, double door with rod locking system and enclosure with single glazed door. Mounting plate included. 3 Main accessories: plinth, internal door kit and modular chassis, wall-mounting brackets, door stop kit. Optional accessories: micro perforated plates, louvered cable entry plates and pole mounting kit. 5 Terminal boxes in 5 different versions, with screwed cover, clear cover, for bus system, flanged, with hinged cover. 6 Rack enclosures from 3 to 1 units in 50 and 550 mm depths. 7 Protection rating for ST boxes: IP66 - Nema (single blank door) Nema 1 (double blank door and plexi door) - IK10. 8 High quality epoxy-polyester powder finish. Colour RAL BOXES SOLUTIONS 157

3 ST SINGLE DOOR BOXES Box with standard locking system Enclosure and door manufactured from 1.5 mm thick sheet steel. Mounting plate manufactured from.5 mm thick sendzimir sheet steel. Enclosure and door: colour RAL 7035 textured finish. Box supplied with: door provided with locking system with ø 3mm double bar key and zincpassivated rails to be fixed mounting plate cable entry plate with sealing gasket screws for earth connection and mounting accessories. IP66 complying with IEC EN608; EN6059 NEMA complying with UL508A; UL50 protection degree guaranteed by the twocomponent polyurethane foam seal EN608; EN60. Note: main accessories to be ordered separately: inner door, see page 16 modular kit, see page 165 brackets for wall mounting, see page 170. SINGLE DOOR BOX ST BOX DIMENSIONS CABLE ENTRY DOOR SPACE MOUNTING PLATE DIM. NUMBER OF LOCKS B A P E F M L H ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST Only for A> 158 ST SINGLE DOOR BOXES ST SINGLE DOOR BOXES 159

4 STP BOXES WITH PLEXI DOOR * * Product ATEX: contact the ETA commercial office for STP boxes with tempered glass 1 Box with rod system Enclosure manufactured from 1.5 mm thick sheet steel. Door provided with.0 mm transparent plexiglas sheet and manufactured from 1.5 mm thick sheet steel up to H= mm; for box H>, door manufactured from.0 mm thick sheet steel. Mounting plate manufactured from.5 mm thick sendzimir sheet steel. A A-5 Enclosure and door: colour RAL 7035 textured finish B P E 3 1 ø13 1 M B-5 Box supplied with: door provided with locking system with ø 3 mm double bar key and zincpassivated rails to be fixed mounting plate cable entry plate with sealing gasket screws for earth connection and mounting accessories. F 3 3 H IP66 complying with IEC EN608; EN6059 NEMA 1 complying with UL508A; UL50 protection degree guaranteed by the twocomponent polyurethane foam seal EN608; EN60. L SINGLE DOOR BOX ST BOX DIMENSIONS CABLE ENTRY DOOR SPACE MOUNTING PLATE DIM. TYPE OF LOCKS B A P E F M L H Only for A> ST ROD SYSTEM ST ROD SYSTEM BOXES WITH PLEXI DOOR STP BOX DIMENSIONS CABLE ENTRY DOOR SPACE M. PLATE DIM. NO. OF LOCKS B A P E F M N L H / TYPE STP STP STP STP STP STP STP STP STP STP STP STP STP STP STP STP STP ROD SYSTEM STP STP ROD SYSTEM 160 ST SINGLE DOOR BOXES STP BOXES WITH PLEXI DOOR 161

5 ST DOUBLE DOOR BOXES Enclosure and door manufactured from 1.5 mm thick sheet steel. Mounting plate with folded edges manufactured from.5 mm thick sendzimir sheet steel. Box with rod system Enclosure and door: colour RAL 7035 textured finish. Box supplied with: doors provided with locking system with ø 3 mm double bar key and zincpassivated rails to be fixed mounting plate cable entry plates with sealing gasket screws for earth connection and mounting accessories. IP66 complying with IEC EN608; EN6059 NEMA 1 complying with UL508A; UL50 protection degree guaranteed by the twocomponent polyurethane foam seal EN608; EN60. Note: main accessories to be ordered separately: brackets for wall mounting, see page 170. Box with standard locking system DOUBLE DOOR BOXES ST BOX DIMENSIONS CABLE ENTRY NO. CABLE DOOR SPACE MOUNT. PLATE DIM. NO. OF LOCKS / A Ø9 A-5 5 B A P E F ENTRY M L H TYPE ST ST ST ST ROD SYSTEM ST ROD SYSTEM ST ROD SYSTEM M M B P B-5 35 E E F H 3 3 L 16 ST DOUBLE DOOR BOXES ST DOUBLE DOOR BOXES 163

6 ST / STP BOXES COMPLEMENTARY ACCESSORIES INNER DOOR STPO1 Frame and door manufactured from 1.5 mm thick sheet steel. Colour RAL 7035 textured finish. Includes: frame door with ø 3 mm double bar key locking system mounting accessories. external: as box (IP66) internal: IPX. MODULAR KIT MDST Frame and front panels manufactured from 1.5 mm thick sheet steel. Includes: frame front panel with modular slot complete with mounting accessories and captive screws zincpassivated DIN rail (for each window) mounting accessories. External: as box (IP66). INNER DOOR STPO1 BOX BOX DIMENSIONS DOOR DIMENSIONS NUMBER ST STP B A P L H C OF LOCKS STPO15 ST50 STP STPO15 ST55 STP STPO16 ST60 STP STPO16 ST65 STP STPO157 ST570 STP STPO157 ST575 STP STPO16 ST60 STP STPO16 ST630 STP STPO168 ST685 STP STPO168 ST6830 STP STPO1610 ST6105 STP STPO1610 ST61030 STP STPO161 ST6130 STP STPO1810 ST81030 STP STPO181 ST8130 STP MODULAR KIT MDST BOX BOX DIMENSIONS PANEL DIMENSIONS MODULES NO. ST STP B A P L H C 18 MM OF PANELS MDST ST30 STP x16 1 MDST ST0 STP x16 1 MDST ST50 STP x16 1 MDST ST55 STP x16 1 MDST ST60 STP x16 3* MDST ST65 STP x16 3* MDST6 ST660 STP x6 3** MDST6 ST6630 STP x6 3** MDST6 ST685 STP x6 ** MDST6 ST6830 STP x6 ** MDST61000 ST6105 STP x6 5** MDST61000 ST61030 STP x6 5** MDST60 ST6130 STP x6 6** ** Available on request the blank frontal panel MDST ** Available on request the blank frontal panel MDST6 16 ST / STP BOXES COMPLEMENTARY ACCESSORIES ST / STP BOXES COMPLEMENTARY ACCESSORIES 165

7 3 1 1 TT CANOPY Manufactured from 1.5 mm thick sheet steel. Includes 1 piece with mounting accessories. 5 LOCKING SYSTEMS WE REF. DESCRIPTION WE85 1 T HANDLE WITH KEYLOCK WE88 WING HANDLE WITH KEYLOCK Note: for outdoor applications, it is recommended to have a special polyester painting that is more suitable for external applications. FAST ASSEMBLY LOCKING SYSTEMS Note: padlocking handle available on request. KEY INSERT REF. DESCRIPTION WE160 WE50 1 FAST ASSEMBLY LOCKING SYSTEM WITH ETA INSERT Ø 3 MM WE WE FAST ASSEMBLY SQUARE INSERT 7 MM WE165 WE305 3 FAST ASSEMBLY SQUARE INSERT 8 MM WE170 WE310 FAST ASSEMBLY DOUBLE BAR INSERT Ø 5 MM WE315 5 FAST ASSEMBLY SCREW DRIVER INSERT ALTERNATIVE LOCKING SYSTEMS 8-10 * With cam and locking cover WE REF. DESCRIPTION *WE35 1 VIRO INSERT *WE0 FIAT INSERT WE10 3 FIAT KEY WE55 ETA INSERT Ø 3 MM WE160 5 ETA KEY Ø 3 MM WE60 6 INSERT 6 MM WE63 7 KEY 6 MM WE65 8 INSERT 7 MM WE68 9 KEY 7 MM WE70 10 INSERT 6,5 MM WE73 11 KEY 6,5 MM WE75 1 INSERT 8 MM WE78 13 KEY 8 MM WE50V 1 LOCKING SYSTEM WITHOUT INSERT LOCKING SYSTEMS FOR DOUBLE DOOR BOXES WITH ROD MECHANISM WE REF. DESCRIPTION WE010 1 ROD DRIVE WE080 FIAT INSERT WE10 3 FIAT KEY WE030 ETA INSERT Ø 3 MM WE160 5 ETA KEY Ø 3 MM WE00 6 ETA INSERT Ø 5 MM WE170 7 ETA KEY Ø 5 MM WE050 8 INSERT 7 MM WE180 9 KEY 7 MM WE INSERT 8 MM WE KEY 8 MM WE070 1 INSERT 7 MM WE 13 KEY 7 MM WE00 1 ETA COVER CANOPY TT TT WIDTH DEPTH TT10 TT0 50 TT105 TT05 50 TT TT06 TT ST / STP BOXES COMPLEMENTARY ACCESSORIES ST / STP BOXES COMPLEMENTARY ACCESSORIES 167

8 HORIZONTAL DOOR RAIL WC MOUNTING PLATE REGULATOR WA Manufactured from 1.5 mm thick sendzimir sheet steel with.5 mm pitch drilling and ø, holes to be fixed on door profiles and used to fix cable or trunking. It allows the mounting plate to be positioned at different depths. Includes 1 piece with mounting accessories. Manufactured from.0 mm thick zincpassivated sheet steel. Includes pieces. Note: order packages for boxes H mm order 3 packages for boxes H > mm single door. RAIL WC DOOR WIDTH WC001 WC00 WC003 WC00 WC005 MICROPERFORATED MOUNTING PLATES WPAZ - F The microperforated mounting plate WPAZ - F is assembled with the same procedure as the standard mounting plates. Manufactured from.5 mm thick sendzimir sheet steel. POLE MOUNTING KIT FPST-001 To fix the box to a pole with round or rectangular section. Rail manufactured from galvanized sheet steel and clamp collar. Includes rails and clamps with mounting accessories. Note: available upon request. Note: codes valid for one or two standard locking points. RAIL WC DOOR WIDTH WC001C WC00C WC003C WC00C WC005C * Plate with raised edges starting from enclosure size x700 MICROPERFORATED MOUNT. PLATES Note: codes valid for boxes with rod system. DOOR STOP WA060 To be used to hold the door open at 90 avoiding accidental closing. Machining required. Manufactured from.0 mm and 3.0 mm thick zincpassivated sheet steel. Includes: single piece with mounting accessories and gasket for IP ST / STP BOXES COMPLEMENTARY ACCESSORIES MOUNTING PLATE REGULATOR WA BOX DEPTH WA980 WA981 WA98 50 WPAZ BOX DIM. M. PLATE DIM. B A L H WPAZ-ST3F WPAZ-ST33F WPAZ-ST35F WPAZ-ST3F WPAZ-STF WPAZ-ST5F WPAZ-ST6F WPAZ-ST55F WPAZ-ST57F WPAZ-ST6F WPAZ-ST66F WPAZ-ST68F WPAZ-ST610F WPAZ-ST61F WPAZ-ST88F WPAZ-ST810F WPAZ-ST81F WPAZ-ST1010F WPAZ-ST101F WPAZ-ST11F FIXING BRACKETS FOR MICRO-SWITCH WI100ST Manufactured from sendzimir sheet steel for fastening the micro-switch WI100 inside the ST boxes. Includes 1 piece with mounting accessories. ST / STP BOXES COMPLEMENTARY ACCESSORIES 169

9 WALL MOUNTING BRACKETS SDWC-010 Manufactured from.5 mm thick zincpassivated sheet steel. Includes pieces. LOUVERED CABLE ENTRY PLATES WC - A Manufactured from 1.5 mm thick sheet steel. Includes 1 piece complete with seals and mounting accessories. PUNCHED CABLE ENTRY PLATES WC - FL Manufactured from 1.5 mm thick sheet steel. Includes 1 piece with gasket, screws for FL frame and mounting accessories. Note: it is available the package with 5 pieces, complete with gaskets, screws for the FL frame and mounting accessories; in this case add suffix 5 to the code (i.e.: WC016FL5). FL13 AND FL1 FRAMES 1 Ø10 5 In reinforced fiberglass, polypropylene and thermoplastic halogen-free elastomers. UL approved materials. Colour: RAL IP CABLE ENTRY GLAND PLATE WC - B Manufactured from 1.5 mm thick sheet steel. Colour: RAL 7035 textured finish Includes 1 piece with sealing gasket and mounting accessories. 5 LOUVERED CABLE ENTRY PLATES WC Note: available on request PLATE DIMENSIONS WC016A 158 x 78 WC018A 58 x 78 WC019A 58 x 18 WC00A 358 x 18 WC0A 558 x 18 PUNCHED CABLE ENTRY PLATES WC PLATE NO. HOLE DIM. OF HOLES DIM. WC016FL 158 x 78 1 per FL x 30 WC018FL 58 x 78 1 per FL x 30 WC019FL 58 x 18 1 per FL1 196 x 6 WC00FL 358 x 18 1 per FL1 196 x 6 WC0FL 558 x 18 per FL1 196 x 6 TEMPERATURE RESISTANCE -0 C +15 C. TEST EN6059 EN , EN506. Includes 10 pieces. FRAMES DESCRIPTION L1 L H WC6650 FL13 FRAME ,5 WC665 FL1 FRAME CABLE ENTRY GLAND PLATE WC PLATE DIMENSIONS WC016B 158 x 78 WC018B 58 x 78 WC019B 58 x 18 WC00B 358 x 18 WC0B 558 x ST / STP BOXES COMPLEMENTARY ACCESSORIES ST / STP BOXES COMPLEMENTARY ACCESSORIES 171

10 INSERTS FOR FL13 AND FL1 FRAMES In reinforced fiberglass, polypropylene and thermoplastic halogen-free elastomers. UL approved materials. Colour: RAL IP65. TEMPERATURE RESISTANCE -0 C +15 C. TEST EN6059, EN60670, EN506. Includes 10 pieces. CABLE INSTALLATION Pushing the cable through the membrane until the membrane allows its passage or remove a part of the membrane before installing the cable with a tinier cable or with a screwdriver. INSERTS FOR FL13 FRAME INSERTS FOR FL1 FRAME DESCRIPTION FOR CABLE Ø MM WC x 68, x M5 + x M , 5-10 WC x 68, KNOCKOUT M50, - M0,M3 WC x 68, 9 x 7-1 MM 7-1 WC x 68, x 0-30 MM 0-30, x 10-0 MM WC x 68,30-50 MM WC x 3, x 8-17 MM 8-17 WC x 3, x M WC x 3, 10 x -10 MM -10 WC66506 WC66507 ATZE UNIVERSAL CORNER PIECES Note: supply includes pieces with mounting accessories. DESCRIPTION ATZE-A100 CORNER PIECES FOR PLINTH H=100 ATZE-A CORNER PIECES FOR PLINTH H= MODULAR PLINTH ATZE Corner pieces manufactured from.5 mm thick press bent sheet steel, with PVC front covers caps. Front and side crosspieces manufactured from.0 mm thick press bent sheet steel. Colour: RAL 705 textured finish. The modular plinth is made up of: corner pieces: supply includes pieces complete with front covers and mounting hardware front crosspieces: supply includes pieces side crosspieces: supply includes pieces. 100 Button holes 15 x 18 DESCRIPTION FOR CABLE Ø MM WC x 68, x WC x 68, x M WC x 68, 10 x -10 MM -10 WC x 3, 1 x M WC66508 WC66509 FRONT CROSSPIECES ATZE DESCRIPTION CROSS. LENGTH MM ATZE-T0 PLINTH CROSSPIECES W= ATZE-T0 PLINTH CROSSPIECES W= 6 ATZE-T1000 PLINTH CROSSPIECES W= ATZE-T0 PLINTH CROSSPIECES W=0 10 P P All the button holes can be used for floor fixing L1 L Note: supply includes pieces. Note: to order the front and side crosspieces H=, add the suffix D to the code. (i.e.: ATZE-T0D). Note: to assemble the plinth on ST, the base requires holes punching. SIDE CROSSPIECES FOR SP / STP WC6651 WC66515 WC66510 WC66511 ATZE DESCRIPTION CROSS. LENGTH MM ATZE-T0S PLINTH CROSSPIECES D= 136 ATZE-T0A PLINTH CROSSPIECES D= 36 Note: supply includes pieces. Note: to order the front and side crosspieces H=, add the suffix D to the code. (i.e.: ATZE-T0SD). DIMENSIONAL SPECIFICATIONS WC66516 WC66517 WC6651 WC66513 BOX DIMENSIONS PLINTH DIM. CENT. DISTANCES L P L P L1 P ST / STP BOXES COMPLEMENTARY ACCESSORIES ST / STP BOXES COMPLEMENTARY ACCESSORIES 173

11 SDV TERMINAL BOXES WITH SCREWED LID SDF TERMINAL BOXES WITH GLAND PLATES Box and lid manufactured from 1. mm thick sheet steel. Box provided with holes for fixing optional hinges and lid fixed with captive screws. Box and lid manufactured from 1. mm thick sheet steel. Box provided with holes for fixing hinges and gland plates complete with gasket; lid fixed with captive screws. IP66 complying with IEC EN608; EN6059 NEMA complying with UL508A; UL50 protection de g ree guaranteed by the twocomponent polyurethane foam seal EN608; EN60. IP66 complying with IEC EN608; EN6059 NEMA complying with UL508A; UL50 protection de g ree guaranteed by the twocomponent polyurethane foam seal EN608; EN60. Only for B= Only for B= Only for B= Only for B= TERMINAL BOXES SDV DIMENSIONS B A P SDV1108 SDV08 SDV308 SDV08 SDV508 SDV608 SDV808 SDV111 SDV1 SDV311 SDV31 SDV331 SDV1 SDV31 SDV1 SDV51 SDV531 SDV61 SDV631 SDV61 SDV81 SDV Note: to be ordered separately: mounting plate and/or DIN rails (refer to page 179). 17 SDV TERMINAL BOXES WITH SCREWED LID Detail TERMINAL BOXES WITH GLAND PLATES TOTAL NUMBER NUMBER OF GLAND PLATES SDF B A DIMENSIONS C P GLAND PLATES SIDE "B" SIDE "A" SDF31 SDF331 SDF1 SDF31 SDF1 SDF51 SDF531 SDF61 SDF631 SDF61 SDF81 SDF Note: to be ordered separately: mounting plate and/or DIN rails (refer to page 179). SDF TERMINAL BOXES WITH GLAND PLATES 175

12 SDVX TERMINAL BOXES WITH TRANSPARENT LID SDVX-B TERMINAL BOXES FOR BUS SYSTEMS Box and lid manufactured from 1. mm thick sheet steel. Hinged lid with captive screws and provided with 3.0 mm thick plexiglas for internal inspection. Box and lid manufactured from 1. mm thick sheet steel. Hinged lid with captive screws and provided with 3.0 mm thick plexiglas for internal inspection. IP55 complying with IEC EN608; EN6059 EN608; EN60. IP55 complying with IEC EN608; EN6059 EN608; EN60. Only for B= Only for B= TERMINAL BOXES WITH TRANSPARENT LID SDVX Note: to be ordered separately: mounting plate and/or DIN rails (refer to page 179). DIMENSIONS B A P SDVX1 SDVX61 TERMINAL BOX FOR BUS SYSTEMS SDVX DIMENSIONS B A P SDVX531B Note: to be ordered separately: mounting plate and/or DIN rails (refer to page 179). 176 SDVX TERMINAL BOXES WITH TRANSPARENT LID SDVX-B TERMINAL BOXES FOR BUS SYSTEMS 177

13 SDP TERMINAL BOXES WITH DOOR SD BOXES COMPLEMENTARY ACCESSORIES Box manufactured from 1. mm thick sheet steel. Door manufactured from 1.5 mm thick sheet steel with ø 3mm double bar key locking system. IP55 complying with IEC EN608; EN6059 EN608; EN60. MOUNTING PLATE SDPA Manufactured from.0 mm thick sendzimir sheet steel. Includes 1 piece. MOUNTING PLATE SDPA BOX DIM. MOUN. PLATE DIM. WIDTH HEIGHT W H SDPA SDPA SDPA SDPA SDPA SDPA SDPA SDPA SDPA SDPA SDPA SDPA SDPA SDPA SDPA INNER RAILS SDWA TERMINAL BOXES WITH DOOR SDP DIMENSIONS Manufactured from sendzimir sheet steel bars. B A P SDP08 80 SDP SDP08 80 SDP1 SDP31 SDP1 SDP51 SDP331 SDP31 Note: to be ordered separately: mounting plate and/or DIN rails (refer to page 179). Includes 10 pieces. Button holes 6 x 18 INNER RAILS SDWA BOX WIDTH B H SDWA ,5 SDWA ,5 SDWA ,5 SDWA ,5 SDWA ,5 SDWA SDWA WALL MOUNTING BRACKETS SDWC Manufactured from.5 mm thick zincpassivated sheet steel. 1 Ø10 5 Includes pieces HINGES SDWA-005 Manufactured from white zincpassivated alloy. Includes 6 pieces with mounting accessories. 178 SDP TERMINAL BOXES WITH DOOR SD BOXES COMPLEMENTARY ACCESSORIES 179

14 CONTROL DESKS CONTROL DESKS E NUX DESK CABINETS MODULAR CONTROL DESKS MONOBLOC CONTROL DESKS

15

SINGLE DOOR BOXES. PAINT FINISH ETA standard epoxy polyester powder coating. Enclosure and door: colour RAL 7035 textured finish.

SINGLE DOOR BOXES. PAINT FINISH ETA standard epoxy polyester powder coating. Enclosure and door: colour RAL 7035 textured finish. ST SINGLE DOOR BOXES Enclosure and door manufactured from 1.5 mm thick sheet steel. Mounting plate manufactured from 2.5 mm thick sendzimir sheet steel. Enclosure and door: colour RAL 7035 textured finish.

More information

BOXES SOLUTIONS. BOXES

BOXES SOLUTIONS.  BOXES BOXES SOLUTIONS - wide range of dimensions: over 40 enclosures with blank door, 19 models with glazed door, enclosures with single blank door, double door with rod system and enclosure with single glazed

More information

CS COMPACT ENCLOSURE. CABINETS. method for lifting uses the same eyebolts as ATB8 cabinets. optional 180 hinges available

CS COMPACT ENCLOSURE.  CABINETS. method for lifting uses the same eyebolts as ATB8 cabinets. optional 180 hinges available CS COMPACT ENCLOSURE method for lifting uses the same eyebolts as ATB8 cabinets optional 180 hinges available CS enclosures can be wall-mounted using standard SDWC-010 mounting brackets as used on ST Box

More information

MONOBLOC CONTROL DESKS

MONOBLOC CONTROL DESKS MONOBLOC CONTROL DESKS Enclosure manufactured from 1.5 mm thick press bent sheet steel provided with front door manufactured from 1.5 mm thick sheet steel with lateral stiffening cover, and upper panel

More information

ATB8 MONOBLOC CABINET

ATB8 MONOBLOC CABINET ATB8 MONOBLOC CABINET finishing profile frame, roof and sidewall are one integral piece removable back mounting plate included in the supply closing system with: 3 points for H=1600, 4 points for H=1800-2000,

More information

MODULAR CONTROL DESKS

MODULAR CONTROL DESKS MODULAR CONTROL DESKS BOX AE W=600/800 W=1200/1600 Structure manufactured from 1.5 mm thick press bent sheet steel and door manufactured from 1.5 mm thick sheet steel with lateral stiffening cover and

More information

STX stainless steel boxes

STX stainless steel boxes STX stainless steel boxes Enclosure and door manufactured from AISI 304 stainless steel (AISI 316 on request). Mounting plate manufactured from 2.5mm sendzimir sheet steel. Hinge in stainless steel. Box

More information

Wall-mounting steel enclosures suitable for any CRN and CRNG application

Wall-mounting steel enclosures suitable for any CRN and CRNG application Wall-mounting steel enclosures suitable for any CRN and CRNG application 1 2 3 4 5 6 1 Front rain gutter prevents the entry of water, oil or liquids, ensuring IP66 protection. 10 9 8 7 1/18 2 A complete

More information

RACK 19 AND NETWORKING SOLUTIONS FEATURES

RACK 19 AND NETWORKING SOLUTIONS FEATURES RACK 19 AND NETWORKING SOLUTIONS FEATURES In full respect of the sustainability and compatibility philosophy, the system of suite cabinets E NUX can be integrated with a range of specific accessories for

More information

Prisma Plus G enclosures IP30, IP31, IP43 enclosures

Prisma Plus G enclosures IP30, IP31, IP43 enclosures Prisma Plus G IP30, IP31, IP43 Prisma Plus G IP30, IP31, IP43 Presentation For safe and upgradeable electrical switchboards > Safety of people and property > Continuity of service > Optimization and upgradeability

More information

IP65 enclosures orion plus

IP65 enclosures orion plus IP65 enclosures orion plus One system for indoor and outdoor application Sheet steel or glass reinforced polyester - the orion plus enclosures are suited for harshest conditions and can be applied for

More information

MODULAR CABINET WITH EXTERNAL DOORS

MODULAR CABINET WITH EXTERNAL DOORS MODULR CBINET WITH EXTERNL DOORS / The solution is composed by: E NUX structure and bottom with adjustable cable entry manufactured from high-strength low-alloy sheet steel roof manufactured from sheet

More information

600 SWINGING FRAME ATTR characteristics. CE-TEK standard epoxy polyester powder coating. Colour: RAL 7032 textured finish.

600 SWINGING FRAME ATTR characteristics. CE-TEK standard epoxy polyester powder coating. Colour: RAL 7032 textured finish. 1 of 9 RACK 19 19 swinging frames 600 SWINGING FRAME Frame manufactured from pressbent rails in 1.5mm sheet steel and 2mm box-shaped horizontal profiles that give high strength. Colour: RAL 7032 textured

More information

PLUS EXTREME PROTECTION FOR HARSH ENVIRONMENTS SOLUTIONS FOR EXTREME APPLICATIONS STAINLESS STEEL SOLUTIONS

PLUS EXTREME PROTECTION FOR HARSH ENVIRONMENTS SOLUTIONS FOR EXTREME APPLICATIONS STAINLESS STEEL SOLUTIONS SOUTIONS FOR EXTREME APPICATIONS STAINESS STEE SOUTIONS For indoor and outdoor applications, where the main requirement is to offer a high resistance to harsh chemical and environmental factors, we propose

More information

Product Overview. Release 11.EN

Product Overview. Release 11.EN Product Overview Release 11.EN The values of a cohesive group BECAUSE WE BELIEVE IN WHAT WE CREATE TOGETHER EVERY DAY Founded in 1978, in Italy, with 40 years of experience in steel, stainless steel and

More information

E NUX RACK 19 AND NETWORKING SOLUTIONS FEATURES AND BENEFITS

E NUX RACK 19 AND NETWORKING SOLUTIONS FEATURES AND BENEFITS E NUX RACK 19 AND NETWORKING SOLUTIONS FEATURES AND BENEFITS In full respect of the sustainability and compatibility philosophy, the system of suite cabinets E NUX can be integrated with a range of specific

More information

Harshenvironments. Solutions manufacturedfrom mildsteelor aluminium alloy Single or double wall

Harshenvironments. Solutions manufacturedfrom mildsteelor aluminium alloy Single or double wall MKTG 2016 Harshenvironments OUTDOOR Solutions manufacturedfrom mildsteelor aluminium alloy Single or double wall STAINLESS STEEL Modular cabinets Monobloc and compact enclosures Wall-mountingboxes Terminal

More information

Product Data For FARNELL

Product Data For FARNELL ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:

More information

Gland Plate 1.4mm mild steel. -Opening: Situated at the far rear of the enclosure to make cabling onto the mounting plate easier.

Gland Plate 1.4mm mild steel. -Opening: Situated at the far rear of the enclosure to make cabling onto the mounting plate easier. 14 SM SHEET STEEL ENCLOSURES ITH MOUNTING PLATE FOR ALL MOUNTING SM Delivery contents: Complete enclosure with mounting plate and fixing material, Blank flange with gasket and screws. Nylon washers for

More information

Areta multiple doors AVAILABLE FULLY ASSEMBLED AND FLAT-PACK.

Areta multiple doors AVAILABLE FULLY ASSEMBLED AND FLAT-PACK. Areta multiple doors A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure. Specific mounting kit allow the fitting out of: - front with door modules complete

More information

cabinets and equipment Atlantic, Atlantic stainless steel, Marina

cabinets and equipment Atlantic, Atlantic stainless steel, Marina cabinets and equipment Atlantic, Atlantic stainless steel, Marina EXTERNAL DIMENSIONS D ATLANTIC CABINETS (p. 276) MARINA CABINETS (p. 286) METAL IK 10 STAINLESS STEEL IP 66-IK 10 POLYESTER - IP 66 - IK

More information

Number of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures

Number of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures us enclosures G. us enclosures Enclosure:.38 Door:.5 IP 65 to EN 60 59/09.00, complies with NEMA. Door with l/h hinge, cam lock with double-bit insert, () support rail(s) S 35/7.5 (for G 586.). Drilled

More information

NexT Range Large sheet steel enclosures

NexT Range Large sheet steel enclosures Large sheet steel enclosures 8 Large sheet steel enclosures The NexT Range is the optimum choice for particularly harsh environments. The stainless steel design of the NexT Range can face up to the toughest

More information

Spacial 3D steel enclosure 19"

Spacial 3D steel enclosure 19 19" The Spacial 3D 19" enclosure offer, for electronics and networks, comprises 2 ranges: - 1-body enclosures, depth 400 mm, with fi xed or swing rack. - 2-body enclosures, depths 400 and 500 mm. Technical

More information

ETA quality, promptly

ETA quality, promptly ETA quality, promptly E MOX - THE PRODUCT PHILOSOPHY E MOX is E.T.A. quality, promptly E.T.A. introduces E MOX, the new range of monobloc enclosure solutions proposed as the effective combination of strength

More information

*Discover our other ranges: Select your range of Spacial steel wall-mounting enclosures. Spacial S3DC. Spacial S3X page 5/4. Thalassa PLM page 6/12.

*Discover our other ranges: Select your range of Spacial steel wall-mounting enclosures. Spacial S3DC. Spacial S3X page 5/4. Thalassa PLM page 6/12. Spacial SDC Select your range of Spacial steel wall-mounting enclosures SDC You need an efficient, sealed multipurpose and aesthetic enclosure for an indoor industrial facility. Our solution: the Spacial

More information

UCP polyester. UDP polyester. UCP Accessories. UDP Accessories. General Accessories. Mounting plates. Wall mounting brackets. Locks.

UCP polyester. UDP polyester. UCP Accessories. UDP Accessories. General Accessories. Mounting plates. Wall mounting brackets. Locks. 160 POLYESTER ENCLOSURES UCP polyester 164 IP66; NEMA 4, 4X, 12, 13 IK10, IK07 H: 315-1035 W: 215-835 D: 170-300 UDP polyester 170 IP 65, 55; NEMA 4, 4X, 12, 13; IK 10, IK 07 H: 500-1250 W: 500-1250 D:

More information

Kaedra Weatherproof DIN Type Enclosures

Kaedra Weatherproof DIN Type Enclosures Multi 9 System Catalog Section 6 Additional System Devices Kaedra Weatherproof DIN Type Enclosures Applications Expandable enclosures for service, industrial, or equipment applications Protects against

More information

Premium Quality - Value Price

Premium Quality - Value Price ACE 19" RACK SYSTEMS 1 VS 7000, Super Efficient Global IT Rack Designed ready to install and meeting international standard and of Top-quality. Two 19" mounting multi-functional profiles create a solid

More information

Rittal CM Compact System Enclosures

Rittal CM Compact System Enclosures Rittal CM Compact System Enclosures Compact class = Top class: Infinite possibilities R Compact enclosure on the outside, Top enclosure on the inside! Index Convincing details... 3 5 Compact system enclosures

More information

Plexo 3 weatherproof cabinets

Plexo 3 weatherproof cabinets 87045 LIMOGES Cedex Telephone: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 Plexo 3 weatherproof cabinets CONTENTS PAGES 1. Description, use.....1 2. Range, equivalence table...1 3. Overall dimensions...2

More information

EASYBOX Series. Weather-proof enclosures

EASYBOX Series. Weather-proof enclosures EASYBOX Series Weatherproof enclosures EASYBOX Series WEATHERPROOF ENCLOSURES IP65 REFERENCE STANDARDS INTERNATIONAL STANDARD IEC 60670 (989) plus Modification (994) Enclosures for accessories for fixed

More information

Compact metal enclosures

Compact metal enclosures Spacial SM Compact metal enclosures Overview Convenience Robustness Comfort Practicality Protection Robustness: Body made as a single piece with welded rear panel. Front part forming a rigid frame with

More information

MODULAR CABINET WITH MULTIPLE DOORS FEATURES

MODULAR CABINET WITH MULTIPLE DOORS FEATURES MODULAR CABINET WITH MULTIPLE DOORS FEATURES 1 Assembly achievable on the basis of the customer s specification, through the use of ETA standard components and accessories. 2 Standard ETA roof, bottom,

More information

E N V I R O N M E N T A L P R O T E C T I O N F O R Y O U R C O N N E C T I O N S

E N V I R O N M E N T A L P R O T E C T I O N F O R Y O U R C O N N E C T I O N S E N V I R O N M E N T A L P R O T E C T I O N F O R Y O U R C O N N E C T I O N S Controlwell presents a range of Junction Boxes manufactured from Halogen-free ABS, which offers superior resistance to

More information

1SLC004001B0202. Enclosures and cable systems overview

1SLC004001B0202. Enclosures and cable systems overview 1SLC004001B0202 Enclosures and cable systems overview Insulating enclosures and installation material IP40 flushmounting Estetica series IP40 flushmounting Europa series IP40 wallmounting Unibox series

More information

CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate

CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate wa_vt08914 Available in 45 sizes... from 250x200x150 mm to 1200x1200x250 mm image01-ci The stable CS enclosures series made of solid sheet steel

More information

Spacial SF for Prisma Plus P system

Spacial SF for Prisma Plus P system The Spacial SF range includes specific enclosure models for installing the Prisma Plus P : functional units and vertical and horizontal busbars The panels are subject to type tests according to standard

More information

ACCESSORIES FOR SZE2 CABINETS

ACCESSORIES FOR SZE2 CABINETS ZPAS 143 DOORS Doors Intended for use instead of front solid door or rear panel. Maximum door opening angle: 120 Sheet steel textured powder paint, light grey (RAL 7035), stiffened profiles, brown smoked

More information

Empty enclosures IEC 62208

Empty enclosures IEC 62208 374 www.hensel-electric.de/en in accordance with for customized solutions and individual applications for example for low-voltage switchgear and controlgear assemblies i n accordance with the IEC 61439-series

More information

Product Data For FARNELL

Product Data For FARNELL ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:

More information

XL³ 400 metal distribution cabinets, free-standing enclosures and cable compartments

XL³ 400 metal distribution cabinets, free-standing enclosures and cable compartments 87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL³ 400 metal distribution cabinets, free-standing Cat. No(s) : 20103/04/05/06/07/08/18/19/23/ CONTENTS PAGE 1. General characteristics...

More information

[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]

[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ] [ SOLUTIONS FOR AUTOMATION & ONTROL DEVIES: ] INDUSTRY STANDARDS Solid hinged cover models. Mounting brackets required to meet UL/SA external mounting requirements. FEATURES remove and -install hinge pins

More information

Serious about Service

Serious about Service Serious about Service Stainless steel enclosures IP66 Features and benefits Features: IP66 certified Grades 304, 304L and 316L available Monobloc symmetrical enclosure Scotch Brite mechanical polished

More information

IP65/IP66 ABS/Polycarbonate Screw Lid Boxes

IP65/IP66 ABS/Polycarbonate Screw Lid Boxes IP65/IP66 ABS/Polycarbonate Screw Lid Boxes p Versatile, lightweight & durable p Choice of materials: polycarbonate for rugged applications or ABS as an economic alternative p IP protection for outdoor

More information

1.6 Accessories include tool-free snap-in technology options for air flow, cable management, shelves, power distribution units, etc.

1.6 Accessories include tool-free snap-in technology options for air flow, cable management, shelves, power distribution units, etc. Rittal TS IT Rack Guide Specifications TS IT network server enclosure 1.0 General Description 1.1 Modular Free Standing Equipment Cabinet 1.2 Various combinations of dimensions: 1.2.1 Height: 48 /1200mm,

More information

CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate

CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate www.bcp-group.co.id CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate Product Information CS Wall-mounted Sheet Steel Enclosures with Mounting Plate Accessories PT. Berkah Cipta Persada Kota Deltamas

More information

Stainless steel enclosures

Stainless steel enclosures Stainless steel enclosures Door reinforcement frame on CRSX 108 and 128 models. Polyurethane foamed gasket ensuring full watertightness (IP66). Back with 4 welded studs for fixing of mounting plate and

More information

Industrial Enclosures

Industrial Enclosures Industrial Enclosures Small enclosures from page 08 Polycarbonate enclosures PK... 0 Cast aluminium enclosures GA... 4 Terminal boxes KL... 6 E-ox E... 9 us enclosures G... 0 RiLAN Industrial IN... 4 Compact

More information

Fiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006

Fiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006 ROSE+BOPLA ENCLOSURES A PHOENIX MECANO COMPANY Fiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006 Dimensional Drawings All sizes are available with an optional clear viewing lid.

More information

workshop specifications Plexo³ IP 65 cabinets

workshop specifications Plexo³ IP 65 cabinets workshop specifications Plexo³ IP 65 THE GLOBL SPECILIST IN ELECTRICL ND DIGITL BUILDING INFRSTRUCTURES With their IP 65 weatherproof protection and optimised dimensions, Plexo³, from 2 to 4 x 18 modules,

More information

Thorne and Derrick UK

Thorne and Derrick UK PO OL LY POLYESTER ENCLOSURES YE ES ST TE ER POLYESTER ENCLOSURES PO OL LY YE ES ST TE ER UCP IP66/NEMA 4, 4X, 12, 13 Compact version H: 315-1035 W: 215-835 D: 170-300 188 UDP IP65/IP 55 NEMA 4, 4X, 12,

More information

metal and polyester INDUSTRIALenclosures 2016catalogue

metal and polyester INDUSTRIALenclosures 2016catalogue metal and polyester INDUSTRIALenclosures 2016catalogue Quality products IDE reserves the right to alter or modify references or characteristics of any of its products, if needed it by any technical improvement,

More information

stainless steel Cover hinge The cover hinge is simply screwed to the box protection channel and to the edge fold. Model No. KL

stainless steel Cover hinge The cover hinge is simply screwed to the box protection channel and to the edge fold. Model No. KL aus HB, S. 46 The Rittal range of terminal boxes offers 44 practical designs, developed and improved in constant dialogue with users. Whether with or without gland plates, in stainless steel, EMC version

More information

The range is fully compatible with the PS system accessories.

The range is fully compatible with the PS system accessories. The ES 5000 exclusive enclosure the compact enclosure system with multiple benefits Compact for electronics, ideal for machine control, generously proportioned for climate control, flexible and cost-effective

More information

Steel Enclosures Contents

Steel Enclosures Contents Contents 12/001 - Type S1GK and GK/SD steel enclosures for industrial control use Type CS and GKP steel enclosures for standard starters Page 12/002 12/002 Type S3GK and GK/DW weatherproof steel enclosures

More information

Euromas-Polyester, an enclosure available

Euromas-Polyester, an enclosure available Euromas-Polyester 8 Euromas-Polyester, an enclosure available in sizes made of 0% glassbead-reinforced polyester, has been designed to satisfy the highest standards. It makes it possible for the user to

More information

MILD STEEL WALL MOUNTING ENCLOSURES

MILD STEEL WALL MOUNTING ENCLOSURES MILD STEEL WALL MOUNTING ENCLOSURES WALL L MOUNTI IN NG WALL L MR5 M5 MO R 5 MAS IP66/NEMA 4, 12, 13 Single door Height: 200-1200 Width: 200-800 Depth: 155-400 ALL MILD STEEL WALL MOUNTING ENCLOSURES MR

More information

Fiberglass Enclosures

Fiberglass Enclosures Fiberglass Enclosures FIBREGLASS ENCLOSURES quadri in vetroresina IP66 FIBreGLASS ENCLOSURES J 7 sizes J Modular and adjustable frame J Din rails adjustable in height J Removable panels J Robust construction

More information

Application Guide EH1, EH2, EH3, EH6. PolySafe. Mersen Canada Toronto Inc.

Application Guide EH1, EH2, EH3, EH6. PolySafe. Mersen Canada Toronto Inc. PolySafe Application Guide EH1, EH2, EH3, EH6 Multipurpose polyester cabinets Range of fourteen multipurpose, factory assembled cabinets in one depth 320mm, for in- and outdoor stationary use. Applications

More information

FAMIGLIA PRODOTTO INNOVATIONS 016 TIPOLOGIA / DESCRIZIONE FAMIGLIA

FAMIGLIA PRODOTTO INNOVATIONS 016 TIPOLOGIA / DESCRIZIONE FAMIGLIA FAMIGLIA PRODOTTO INNOVATIONS 016 TIPOLOGIA / DESCRIZIONE FAMIGLIA 1 INDEX RACK SOLUTIONS INNOVATIONS 2016 THERMAL MANAGEMENT UPGRADE: MARKET REQUESTS RACK Rack E NUX RACK 19 AND NETWORKING SOLUTIONS

More information

Rittal Small Enclosures

Rittal Small Enclosures Rittal Small Enclosures Fast and perfect, with an exceptionally diverse range of system accessories R The original is still the best! Packaging technology for the future Whether you require enclosures

More information

Viale Borri Varese - Italy IDROBOARD weatherproof cabinets Cat. Nos :

Viale Borri Varese - Italy IDROBOARD weatherproof cabinets Cat. Nos : Viale Borri 231 21100 Varese - Italy IDROBOARD weatherproof cabinets Cat. Nos : Index Pages 1. Description - Use... 2 2. Range...2 3. Overall dimensions...2 4. General characteristics...3 5. Setting in

More information

OUR VISION STAINLESS STEEL MILD STEEL MODULAR FLOOR STANDING NON METALLIC P F BLACKBURN SOUTH VIC 3130

OUR VISION STAINLESS STEEL MILD STEEL MODULAR FLOOR STANDING NON METALLIC P F BLACKBURN SOUTH VIC 3130 Excalibur REAZ AUSTRALIA Enclosures PTY LTD 59 P.O. Northville BOX 2340 Drive Barnsley NSW 2278 BLACKBURN SOUTH VIC 3130 T - 03 9878 4141 sales@reaz.com.au EX-EC/S General Purpose Wall Mount Enclosures

More information

Wall-Mount Enclosures

Wall-Mount Enclosures Wall-Mount Enclosures Protection When Safety Matters Most When selecting an enclosure, application can be associated with market or product. For example, is your enclosure going to be used in a petrochemical

More information

MINIPOL. Hot moulded GRP

MINIPOL. Hot moulded GRP MINIPOL Hot moulded GRP MINIPOL System HOT MOULDED CABINETS Grey color RAL 7035 Two door types Plain: allows the mounting of devices in the door. Glazed: Combined with mounting plate, chassis and/or internal

More information

CUSTOM ENCLOSURE CUTOUTS

CUSTOM ENCLOSURE CUTOUTS www.factorymation.com/enclosures ENCLOSURES 147 WWW.FACTORYMATION.COM/ENCLO- CUSTOM ENCLOSURE CUTOUTS We ll cut the holes to your specifications so the enclosure arrives... READY FOR YOUR ASSEMBLY! Enclosure

More information

Features EN/IEC Applications

Features EN/IEC Applications PO Modular polyester boxes nsulated boxes Standards eatures ntro N/ 639- N/ 6059 N/ 608 pprovals - oxes with polyester cover: types 3, 3R,,, 6, 6P, and 3 - oxes with polycarbonate cover: types 3, 3R,,,

More information

XL Distribution enclosures WORKSHOP SPECIFICATIONS

XL Distribution enclosures WORKSHOP SPECIFICATIONS 800 Distribution enclosures WORKSHOP SPECIFICATIONS With its extensive ranges, the Legrand offer meets your quality standards and provides real freedom and simplicity of installation together with acknowledged

More information

Applications Profitronic 19 / Profitronic 19U

Applications Profitronic 19 / Profitronic 19U Applications Profitronic 19 / Profitronic 19U 54 Enclosure in variable length version using profile technology Standard construction or version with connection compartment Optional Polycarbonate transparent

More information

2.1 Accessories System for Enclosures CRN-CRS

2.1 Accessories System for Enclosures CRN-CRS nclosures Wall Mounted 2.1 Accessories ystem for nclosures CRN-CR Mounting plates A complete range of mounting plates comprising 4 versions able to provide all the mountings needed for this installation

More information

Rittal console systems...

Rittal console systems... Rittal console systems...... multi-variable Universal console Optionally with short or tall door. Short door offers free field for mounting desk section (see photograph) or keyboard drawer. High level

More information

Wall Mounted Enclosures Steel Range Stainless Steel Single door ASR

Wall Mounted Enclosures Steel Range Stainless Steel Single door ASR Wall Mounted Enclosures Steel Range Stainless Steel Single door ASR IP 66 TYPE 4X, 12, 13 IK 10 252 Product Catalogue 02 Wall Mounted Enclosures Material: AISI 304 / AISI 316L pre-grained stainless steel.

More information

Baying systems TS 8. Height: 1200 mm/1400 mm, depth: 500 mm

Baying systems TS 8. Height: 1200 mm/1400 mm, depth: 500 mm Baying systems TS 8 System accessories Page 537 TS 8 corner enclosures Page 583 TS 8 stainless steel Page 194 TS 8 EMC-shielded Page 200 Material: Enclosure frame, roof, rear panel and gland plates: Sheet

More information

safybox BRES GRP POLYESTER ENCLOSURES Double Insulation polyester enclosures. Light Grey Colour RAL7035. Self-extinguishing material

safybox BRES GRP POLYESTER ENCLOSURES Double Insulation polyester enclosures. Light Grey Colour RAL7035. Self-extinguishing material Double Insulation. Light Grey Colour RAL7035. Self-extinguishing material End user friendly hinge-pin system, It enables to work separately on the rear back panel and on the door, making the assembly more

More information

CABINETS & ENCLOSURES

CABINETS & ENCLOSURES S & ENCLOSURES Floor Standing Cabinets A4 Series 18RU, 27RU & 42RU PSS 262 Wall Mounted Cabinets WM Series 6RU, 12RU & 18RU PSS 263 ZH Series 6RU, 12RU & 18RU PSS 263 Cabinet ACCESSORIES Wall & Floor Mounted

More information

Rack Mount devices shown not included Custom cabinet shown

Rack Mount devices shown not included Custom cabinet shown 763.422.2588 SPEC-00215 M763.422.2661 NETWORKING OUTSIDE PLANT PRODUCTS COMLINE OSP WALL-MOUNT CABINET PACKAGE AND ACCESSORIES Outside Plant Products COMLINE OSP Wall-Mount Cabinet Package and Accessories

More information

Innovative Solutions Overview

Innovative Solutions Overview Innovative Solutions Overview Release 12.EN THE VALUES OF A COHESIVE GROUP BECAUSE WE BELIEVE IN WHAT WE CREATE TOGETHER EVERY DAY Founded in 1978, in Italy, with 40 years of experience in steel, stainless

More information

OMNIA System OMNIA SYSTEM - IP55 FLUSH AND SURFACE MOUNTING MODULAR SYSTEM. t. 50

OMNIA System OMNIA SYSTEM - IP55 FLUSH AND SURFACE MOUNTING MODULAR SYSTEM. t. 50 OMNIA System OMNIA SYSTEM - IP55 FLUSH AND SURFACE MOUNTING MODULAR SYSTEM The flush mounting box, which is suitable for walled installations, can be combined both horizontally and vertically with any

More information

Catalog / 2016 North American Edition

Catalog / 2016 North American Edition Catalog 34 2015 / 2016 North American Edition without knockouts without knockouts without knockouts without knockouts PK Polycarbonate Housing Height inches (mm) Packs of 4.3 (110) 4.3 (110) 4.3 (110)

More information

Knürr Smaract. Knürr Smaract. CompactRack

Knürr Smaract. Knürr Smaract. CompactRack CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.

More information

Linkeo 19 freestanding cabinets

Linkeo 19 freestanding cabinets Linkeo 19 freestanding cabinets Catalogue number(s): 6 467 50/51/55/56/60/61/62/63 Page 1.Generalcharacteristics...1 2.Range...2 3. Technical characteristics.................3 4.Dimensions...4 5.Baying...8

More information

Human Machine Interface Console Range Modular MPC

Human Machine Interface Console Range Modular MPC Console Range Modular MPC IP 66 TYPE, 12, 13 IK 10 (single door); IP 55 TYPE 12, 13 IK 10 (double door) 36 Product Catalogue 0 Material: ody and door: 1.5 mm mild steel. Rear panel: 1.5 mm mild steel.

More information

The Rittal Flex-Block base/plinth system

The Rittal Flex-Block base/plinth system The Rittal Flex-Block base/plinth system 50 Save time Fast assembly by simply clipping together the base/plinth components Easily bayed with toolless baying clip The enclosure is easily transported in

More information

Wall Mount Racks - WMOD

Wall Mount Racks - WMOD Wall Mount Racks - WMOD Overview WMOD Series, Wall mount Racks for Outdoor Application and Designed to meet IP55 (Ingress protection) requirement. Racks are manufactured out of CRCA steel sheet punched,

More information

Floor Standing Enclosures

Floor Standing Enclosures & Floor Standing Enclosures Industrial Automation Power istribution 5 Modular Type Modular Type Görsel 6 Görsel 8 Monoblock Type Monoblock Type Görsel 7 Görsel 9 6 7 FRAME STRUCTURE EARTING CONTINUITY

More information

US Catalog March 2017 Wall-mount enclosures for automation

US Catalog March 2017 Wall-mount enclosures for automation US Catalog March 2017 all-mount enclosures for automation all-mount enclosures for automation SR2 Enclosures SRX Enclosures Gemini Enclosures 1 2 US Catalog all-mount Enclosures for Automation 1/1 1 1/2

More information

Bocube. Colour: Graphite grey, similar to RAL 7024; light grey, similar to RAL 7035; special colours on request

Bocube. Colour: Graphite grey, similar to RAL 7024; light grey, similar to RAL 7035; special colours on request Bocube Detailed product information can be found on www.bopla.de - Patented, innovative, hinged quick-release catch technology without screws: open with a screwdriver, close by hand - 22 sizes, 132 standard

More information

SECTION 18 ENCLOSURES

SECTION 18 ENCLOSURES COLTERLEC ELECTRICAL ENGINEERING PRODUCTS SECTION ENCLOSURES COLTERLEC ELECTRICAL ENGINEERING PRODUCTS 549 TM CONTENTS PHOENIX ENGINEERING & MANUFACTURING SOLUTIONS Stainless Steel Stainless Steel Wall

More information

Cubicles Frameworks. Enclosures W=400mm. System P. 400 mm deep framework. 600 mm deep framework. Hinged front plate support frame.

Cubicles Frameworks. Enclosures W=400mm. System P. 400 mm deep framework. 600 mm deep framework. Hinged front plate support frame. Frameworks DD380800 400 mm deep framework DD380572 DD380573 DD380574 08407. Framework width W = 300 mm 08403 W = 400 mm 08404 W = 650 mm 08406 W = 800 mm 08408 W = 800 mm (650 + 150) 08407 b composition

More information

TO ALL OUR CUSTOMERS. Poles

TO ALL OUR CUSTOMERS. Poles Page 1 TO ALL OUR CUSTOMERS 1. NEWS: NEW 20-32-40A THERMOPLASTIC ENCLOSURES FOR THE ISOLATORS SERIES The thermoplastic ISOLATORS series offer has been expanded, introducing a range of products for 20,

More information

2 The Isle of Cold Server enclosures. outdoor enclosure

2  The Isle of Cold Server enclosures. outdoor enclosure CATALOGUE HB2 outdoor enclosure HB2 based on the frame construction with mounted panel walls, made of aluminium sheet. The enclosure is an answer for market s needs connected with telecommunication industry

More information

EJB Enclosures. ATEX II 2 G Ex d IIB+H2 T6...T3 - II 2 D Ex td A21 T85 C C IECEx Ex d IIB+H2 T6...T3 - Ex td A21 T85 C...

EJB Enclosures. ATEX II 2 G Ex d IIB+H2 T6...T3 - II 2 D Ex td A21 T85 C C IECEx Ex d IIB+H2 T6...T3 - Ex td A21 T85 C... EJB Enclosures ATEX and IECEx Zone 1 certified Explosion proof Marine grade copper-free aluminium IP66 The EJB Series is a range of explosion-proof enclosures, available in either aluminium alloy (EJB)

More information

Distribution Boards AT/U Series

Distribution Boards AT/U Series 2-0 Distribution Boards AT/U Series Index Pages Product Features 2-3 AT/U Series Ordering Information 2-6 Equipped Distribution Boards 125 mm Distance Between Rows 2-10 Equipped Distribution Boards 150

More information

CONCEPT Wall-Mount Enclosure Accessories

CONCEPT Wall-Mount Enclosure Accessories CONCEPT Wall-Mount Enclosure Accessories The CONCEPT Enclosure Group Accessory Selection Guide Steel section 4 or Stainless Steel Enclosures section 6 Steel section 4 or Stainless Steel Window-Door Enclosures

More information

Product Catalog. Industrial Enclosures

Product Catalog. Industrial Enclosures Product Catalog Industrial Enclosures WE ARE CONTEG Since 1998, Conteg has been moving step by step toward the top of the market. We re a leader in supplying complete solutions for data centers, along

More information

SMALL CABINETS. Small cabinets QL pag.1. Small cabinets QV pag.3. Small cabinets QLP pag.5. Small cabinets QVP pag.7. Small cabinets QS pag.

SMALL CABINETS. Small cabinets QL pag.1. Small cabinets QV pag.3. Small cabinets QLP pag.5. Small cabinets QVP pag.7. Small cabinets QS pag. QL pag.1 QV pag.3 QLP pag.5 QVP pag.7 QS pag.9 QM pag.11 Accessories for small cabinets pag.13 SMALL CABINETS SMALL CABINETS QL INSIDE DOORS WALL FIXING LUGS DOOR LOCKS ANTI-CLOSE DEVICE SMALL CABINETS

More information

The Weidmüller Catalogue System Industry 2002

The Weidmüller Catalogue System Industry 2002 The Weidmüller Catalogue System Industry 2002 1 5 Sectional catalogue 1: Terminals 2002 W-Series Z-Series IDC-Series SAK-Series Ex Terminals - ATEX Terminals in power supply applications KLBÜ shield connection

More information

Outdoor system solutions

Outdoor system solutions Outdoor system solutions At home in any outdoor application 2 Rittal Outdoor system solutions Energy Mounting benefits Flexible basic enclosure, optionally with doors front and rear, for rapid interior

More information

also in ATEX Data Sheet Enclosures Klippon POK Glass Fibre reinforced Polyester Enclosures

also in ATEX Data Sheet Enclosures Klippon POK Glass Fibre reinforced Polyester Enclosures Data Sheet Enclosures Klippon POK Glass Fibre reinforced Polyester Enclosures also in ATEX Weidmüller s established range of Klippon POK GRP (Glass Fibre reinforced Polyester) enclosures has been updated

More information