Carlon. Enclosures. Himeline * Enclosures. HS, HP and HLA/HLS Series Features. Applications. Standards

Transcription

1 Himeline * HS, HP and HLA/HLS Series Features High-impact strength High dielectric strength Suitable for indoor and outdoor use Fully gasketed Lightweight Applications Instrument case Junction and terminal boxes Control and switching enclosures Meter and transformer cabinets Small device enclosures Standards Meets NEMA and IP standards as indicated in appropriate section Himeline * enclosures are the ideal alternative to expensive stainless steel enclosures. They have excellent corrosion resistant properties; are impervious to sunlight, dirt and moisture. Available in three series (HS, HP and HLA/HLS), with sizes ranging from 4 x 3 x 2 through 50 x 40 x 7, these enclosures offer choices that include double doors, clear or opaque covers, hinged and screw versions, single or three point closure mechanisms, 4X windows, DIN rail mounting and adjustable depth door in door option that allow you to customize your enclosures by separating power from communications. E24

2 Himeline * HS Series Screw-On Fastened and Hinged Cover Meets NEMA, 3, 3S, 4, 4X, 2 and 3 Meets IP 65 Features Standard slotted locking screw High impact strength Chemical resistance High dielectric strength Excellent weathering capabilities Sealing gasket on all models Applications Junction boxes Terminal wiring boxes Instrument and control housings Small device enclosure applications Indoor or outdoor use Sunlight resistant Standards Himeline * HS Series enclosures are designed for use as junction boxes, terminal wiring boxes, instrument and control housings and small device enclosure applications. Molded under high pressure, Himeline * HS Series enclosures provide high-impact strength, chemical resistance, high dielectric strength and excellent weathering capabilities. Meets NEMA, 3, 3S, 4, 4X, 2 and 3 standards as indicated Meets IP 65 culus Listed Material Opaque/Clear Lid Polycarbonate Base Fiberglass Reinforced Polyester E25

3 Himeline * HS Series Screw-On Fastened and Hinged Cover Features Molded under high pressure High impact strength Chemical resistance High dielectric strength Excellent weathering capabilities Clear cover available Specifications Opaque Screw- On Cover Clear Screw-On Cover Opaque Hinged Cover Clear Hinged Cover External Internal Opaque A B C D E F each Screw/ Hinged Clear Wt. (lb.) each Screw/ Pkg. Hinged Back Panel Dimensions H x W Thickness HS7A7 HS7A7C HH7A7 HH7A7C /7 0.9/6.2 4 HS7ABP 5.5 x HSA7 HSA7C HHA7 HHA7C /8.5 4/8 4 HSABP 9.05 x HSB7 HSB7C HHB7 HHB7C /4 8/4 4 HSBBP 9.05 x HSC7 HSC7C HHC7 HHC7C /3 2.5/3 2 HSCBP 9.05 x HS5C7 HS5C7C HH5C7 HH5C7C / 8/ 2 HS5CBP 2.60 x HS2C7 HS2C7C HH2C7 HH2C7C /3 2/3 HS2CBP 9.68 x HSA9 HSA9C HHA9 HHA9C /4 6.6/5 4 HSABP 9.05 x HSB9 HSB9C HHB9 HHB9C /6 9/6 4 HSBBP 9.05 x HSC9 HSC9C HHC9 HHC9C /9 4/9 2 HSCBP 9.05 x HS5C9 HS5C9C HH5C9 HH5C9C / 9/ 2 HS5CBP 2.60 x HS2C9 HS2C9C HH2C9 HH2C9C /4 4/4 HS2CBP 9.68 x HS5D9 HS5D9C HH5D9 HH5D9C /3 3/3 HS5DBP 2.60 x HS2D9 HS2D9C HH2D9 HH2D9C /8 7/8 HS2DBP 9.68 x Back panels and mounting feet must be ordered separately Contact your Regional Sales Office for availabililty and delivery Wt. (lb.) Ctn. B C F A E D 0.47 E26

4 Himeline * HS Series Accessories Thumb Screws For Himeline * HS Ctn Ctn. HSTS HSTS Mounting Feet For Himeline * HS Description Ctn. Ctn. Wt. (lb.) HSMFZ Zinc Dichromated Steel 4/set 0.2 HSMFSS 304 Stainless Steel 4/set 0.2 Back Panels For Himeline * HS ** Metal back panels are white painted 4 gauge steel Nonmetallic Carrying Handle Converts enclosures to portable units for meters and portable power Size **Himeline * HS enclosures are not shipped with back panels. Order separately PVC back panels available upon request. Consult your Regional Sales Office Ctn. Ctn. Wt. (lb.) HS7ABP 5.5 x HSABP 9.05 x HSBBP 9.05 x HSCBP 9.05 x HS5CBP 2.60 x HS2CBP 9.68 x HS5DBP 2.60 x HS2DBP 9.68 x Ctn. Ctn. HSCH 0.2 E27

5 Himeline * HS Series Accessories Draining Device For 3R Rating and condensation build-up Ctn. HPVEA9 Air Vents NEMA Rated only Description Ctn. Ctn. HPVM25 For fitting outside of all enclosures 4/set HPVM35 For fitting inside of all enclosures 4/set Enclosure Ventilator Allows any size enclosure to breathe, yet remains watertight Ctn. HVM27 E28

6 Himeline * HP Series with Hinged Quick-Release Cover (Fiber Reinforced Polyester) Meets NEMA, 3, 3S, 4, 4X, 2 and 3 Meets IP 66 Himeline * HP Series enclosures for medium sized devices and equipment provide superior performance as junction and terminal wiring boxes, and instrument and control housing applications. For indoor/outdoor industrial, MRO and OEM applications. HP Series enclosures are resistant to corrosion, sunlight, chemicals, dirt and moisture. Temperature range from -50 C to 60 C. Features Projections for affixing cover mounted panel Door locking mechanism convertible to key lock M8x8 studs for back panel mounting (included) Hidden hinges open 85 for easy access Multipositional DIN rail fixing components Removable stainless steel hinge pins Single piece construction Opaque or tempered glass window option Steel, nonmetallic & slotted back panels available External & internal venting available Hinged variable height inner panel option Quick /4-turn lock Underside grid pattern on inner door panel Self-positioning panel depth adjusters Pole mounting kit Pedestal mounting capability Sunlight resistant Applications Junction boxes Terminal wiring boxes Instrument and control housing Indoor or outdoor use Standards NEMA Type, 3, 3S, 4, 4X, 2 and 3 Meets IP 66 Material Lids/Bases Fiberglass reinforced polyester E29

7 Himeline * HP Series (Fiber Reinforced Polyester) Specifications Enclosure with Opaque Cover Ctn. Enclosure with Clear Window* Ctn. Window Dimension (H x W) External Internal Mounting Window A B C D E F G H J K HP62B.04 HC62B 2.5 x HP206B 6.80 HC206B x HP246B 2.3 HC246C x HP3020D HC3020D** x HP3325D HC3325D** x * HC are IP 65 Rated. Clear window is glass ** This series of enclosures come standard with body, lid and mounting rail kit B C E D J A G K Hinged Internal Door Internal fiberglass reinforced polyester door assembly Grid pattern on the inside for quicker positioning of equipment Quick locking /4-turn entry H F Depth with back panel installed Enclosure with A B C D Opaque Cover (mm) (mm) (mm) (mm) HP62B Ctn. Ctn. HP206B HP246B HP3020D HP3325D E30

8 Himeline * HP Series Accessories Back Panels Dimensions A complete range of plates, which can be directly fixed to the enclosure supports or to the adjustable depth supports. Steel Back Panels Steel back panels are white painted 4 gauge steel To Fit Thickness Weight P (mm) (mm) PMM62 HP62B PMM206 HP206B PMM246 HP246C PMM3020 HP3020D PMM3325 HP3325D S PVC Insulating Back Panels PVC back panels are made from /4 in. PVC and meet UL94 V-O To Fit Weight P S lb. kg (mm) (mm) PMB62 HP62B PMB206 HP206B PMB246 HP246C PMB3020 HP3020D PMB3325 HP3325D Slotted Back Panels Zinc dichromated coated steel plates perforated for addition of electrical circuit To Fit Weight D E lb. kg (mm) (mm) PMR62 HP62B PMR206 HP206B PMR246 HP246C PMR3020 HP3020D PMR3325 HP3325D E3

9 Pole Mounting Set Himeline * HP Series Accessories HPPF300 HPPF400 HPPF500 HPPF600 To Fit HP62B HP206B HP246C HP3020D HP3325D Ctn. 35 mm Symmetrical DIN Rail To Fit Width HPC0300 HP62B.02 HPC0400 HP206B HP246C 4.96 HPC0500 HP3020D 8.90 Ctn. Rail Mounting Insert Features Ctn. HPRFK Fits all enclosures Wall Mounting Set (includes brass inserts and installation tools) Ctn. Ctn. HPWMF 4 0. Blanking Grommet (to close off openings on enclosure backs) To Fit Description Ctn. Ctn. HPBNGB 6 x 2 and 20 x 6 Blanking Grommet Set of 4.00 HPBNGC 24 x 6, 30 x 20 and 33 x 25 Blanking Grommet Set of 4.00 E32

10 Himeline * HP Series Accessories Fixing Accessories For Slotted Plates Fixing Nut Fixing Bolt With Washer Type of Thread Ctn. Length Ctn. HPFA4 M4 00 HPFB HPFA4 M4 00 HPFB HPFA5 M5 00 HPFB HPFA5 M5 00 HPFB HPFA6 M6 00 HPFB HPFA6 M6 00 HPFB Back Panel Depth Adjustable Supports Supports designed to fit 7.87 in. (200 mm), 9.84 in. (250 mm),.8 in. (300 mm) and 3.78 in. (350 mm) deep enclosures. Self-positioning slots allow for adjustment every 0.49 in. (2.5 mm). Made of zinc dichromated coated steel. A B To Fit A B Ctn. (mm) (mm) HPLM200 HP62B and HP206B set of 4 HPLM250 HP246C set of4 HPLM300 HP3020D and HP3325D set of 4 Pedestal Mount HPSFS To Fit HP206B HP246C Ctn. Draining Device (For 3R Rating and condensation build-up) Ctn. HPVEA9 E33

11 Himeline * HP Series Accessories Air Vents NEMA Rated only HPVM25 HPVM35 Description For fitting outside of all enclosures For fitting inside of all enclosures Ctn. Enclosure Ventilator Allows any size enclosure to breathe, yet remains watertight Ctn. HVM27 Coupling Frame For Himeline HP HP3020D and HP3325D Ctn. HPBU Replacement Standard Handle Ctn. Ctn. HPRSH 0.05 Locks For Himeline HP Replacement Door Lock Cylinder Key Lock (Keyed Alike) Padlocking Service Ctn. HPRLA Ctn. HPTPLM Ctn. HPPLH E34

12 Himeline * HLA/HLS Series (Fiber Reinforced Polyester) Features Fiber reinforced polyester Temperature range of 50 to 50 C Indoor/outdoor applications Superior strength High resistance to harsh environments Watertight gasket seal One- and two-door configurations Locking mechanism and hinge are outside gasketed area Floor or wall mounted Applications Contain large devices and equipment Junction and terminal wiring boxes Instrument and control housings Himeline * HLA/HLS Series are large Fiber Reinforced Polyester Cabinets ranging in sizes 20 x 20 x 7 to 50 x 40 x 7 and 20 x 20 x 2 to 50 x 40 x 2, respectively. They have operating temperatures of 50 to 50 C and can accommodate large devices and equipment for a wide range of applications including junction and terminal wiring boxes, instruments and control housings. They are ideal for indoor/outdoor industrial, MRO and OEM applications and offer superior strength and high resistance to corrosion, moisture, dust, oil and UV light, enabling them to withstand the harshest of environments. Standards IP 65 Rating (Single door versions only) NEMA Type 4/4X Rated (Single door versions only) culus Listed The HLA/HLS Series are fitted with a watertight gasket and are available in one- and two-door configurations. These cabinets have a closed top and bottom and the two-door version includes a central upright to maintain rigidity. To maintain the watertight seal, the locking mechanism is positioned outside the gasketed area. A wide variety of accessories are available such as steel and nonmetallic back panels, selfpositioning panel depth adjusters and ventilator kits. E35

13 One Door NEMA Types, 2, 3, 3R, 4, 4X, 5, 2 and 3 Himeline * HLA/HLS Series Single and Double Hinged Cover with Latches HLA One Door (7 in. Deep) Dimensions H W D Ctn. Ctn. HLA HLA HLA HLA HLA HLA HLA HLA HLS One Door (2 in. Deep) Two Door NEMA Types, 2, 2 and 3 Dimensions H W D Ctn. Ctn. HLS HLS HLS HLS HLS HLS HLS HLS HLA Two Door (7 in. Deep) Dimensions H W D Ctn. Ctn. HLA HLA HLA HLA HLS Two Door (2 in. Deep) Dimensions H W D Ctn. Ctn. HLS HLS HLS HLS E36

14 Himeline * HLA/HLS Series Accessories Back Plates (Fiber Reinforced Polyester) Nonmetallic Thermosetting Plastic (Bakelite) One Door Dimensions H W Ctn. Ctn. LP2020BP LP3020BP* LP3030BP LP4020BP LP4030BP LP5020BP LP5030BP * Use Back Panel LP3020BP for HLA2030, HLA3020, HLS2030 and HLS3020 Two Door Dimensions H W Ctn. Ctn. LP30402BP LP40402BP LP40502BP LP50402BP Metal Galvanized Steel One Door Dimensions H W Ctn. Ctn. LA2020BP LA3020BP** LA3030BP LA4020BP LA4030BP LA5020BP LA5030BP ** Use Back Panel LA3020BP for HLA2030, HLA3020, HLS2030 and HLS3020 Two Door Dimensions H W Ctn. Ctn. LA30402BP LA40402BP LA40502BP LA50402BP E37

15 Himeline * HLA/HLS Series Accessories Mounting Feet Replacement Handle with Cylinder Key Lock Ctn. Ctn. HLAMFSS ea. (set of 4) 0.6 Ctn. Ctn. HLATEL ea. 0.4 Panel Adjuster Kit Standard Replacement Bar Lock with Key Ctn. Ctn. HLABPA4 ea. (set of 4) 0.3 Ctn. Ctn. HLATD ea. 0.2 Padlock Device Replacement Handle with Push Button Ctn. HLAPAD Ctn. Ctn. HLAHAN 0.40 Air Vents NEMA Rated only Draining Device For 3R Rating and condensation build-up HPVM25 HPVM35 Style For fitting outside of all enclosures For fitting inside of all enclosures Ctn. Ctn. HPVEA9 Enclosure Ventilator Allows any size enclosure to breathe, yet remains watertight Ctn. HVM27 E38

16 Himeline * HLP Series Enclosure and Pedestal Enclosure Pedestal Himeline * HLP and Pedestals are designed to accommodate all types of electrical equipment for electrical distribution applications. The enclosure may be directly installed on the ground or on top of a pedestal, and the pedestal is approved for direct burial applications. Both are manufactured using fiber reinforced polyester to provide high impact resistance and allow effortless modifications. And each have an IP-43 Self-Ventilated and IP-54 Watertight rating and a temperature range of 50 to 50 C. Enclosure Features High impact resistance Non-conductive and non-corrosive Fits all type of electrical equipment IP-43 Self-Ventilated IP-54 Watertight One and two door configurations Install directly on the ground or on a pedestal Removable inner hinges for great access Doors open 80 Pedestal Features Can be direct buried Non-conductive and non-corrosive Detachable upper front for easy access High impact resistance Auxiliary outlet on the side IP-43 Self-Ventilated IP-54 Watertight Floor or wall mountable Material Fiberglass Reinforced Polyester E39

17 Himeline * HLP Series Specifications No. No. of of Locks Doors A Height B Width C Depth Ctn. Wt. (lb.) HLP HLP HLP HLP HLP33442L Pedestals A B C Height Width Depth Ctn. Wt. (lb.) HLPED HLPED HLPED HLPED Mounting Plates Accessories Enclosure Pedestal # of Plates per Encl. D E Thickness Ctn. Wt. (lb.) LA42BP HLP338 HLPED LA86BP HLP33442L HLPED33442L LA96BP HLP3323 HLPED LA2725BP HLP333 HLPED Size H x W x D Ctn Wt. (lb.) HLP338G 33 x 8 x HLP3323G 33 x 23 x HLP333G 33 x 3 x HLP3344G 33 x 44 x E40