VOLUME 15 LEADING THE WAY IN POLYCARBONATE ENCLOSURES PRODUCT CATALOG PREMIUM LINE IMPACT LINE GENESIS LINE CUSTOM PRODUCTS

Transcription

1 VOLUME 15 LEADING THE WAY IN POLYCARBONATE ENCLOSURES P O L Y C A R B O N A T E & N O N - M E T A L L I C E N C L O S U R E S PRODUCT CATALOG PREMIUM LINE IMPACT LINE GENESIS LINE CUSTOM PRODUCTS

2 INTEGRA GIVES YOU AN EDGE IN PROTECTION POLYCARBONATE FEATURES & BENEFITS Improved Impact Resistance Lighter Weight Greater UV Resistance Ease of Modification More Eco-Friendly Rarely Damaged from Shipping & Handling Integra s enclosure is not like anyone else s. Our superior design, including our use of polycarbonate material, provides an enclosure that is durable, seals tight, supports easy component installation, and looks great. Integra also maintains an extensive, on hand inventory to support your delivery. Superior design, fast shipment, and competitive pricing are three benefits that make Integra Enclosures a smart choice for your electrical and telecommunication enclosure needs. Call us at or visit our website to learn more about Integra Enclosures. UL / c-ul Listed NEMA 4X, 6P, 12, 13 & Marine Use Patent No. 6,604,798 CE & IP 66/68 Protection RoHS ATEX (contact factory) 2 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

3 POLYCARBONATE, THE BETTER TECHNOLOGY. Technology continues to improve at a very rapid pace. The ability to send and receive information has greatly improved the ability to monitor or control all sorts of applications, creating more applications needing a more advanced electrical enclosure. Just as electronics has evolved, so has enclosure technology. Polycarbonate represents the next step in the evolution of technology for outdoor, wireless, wastewater treatment, solar, broadband over powerline (BPL), smart grid, and all the traditional non-metallic applications. POLYCARBONATE APPLICATIONS Polycarbonate enclosures are a superior choice for a wide range of outdoor applications and environments: Remote Monitoring - For remote placement of monitoring or networking devices/components Alternative Energy - From solar to wind, keep systems safe from the environment Water Treatment - Water/wastewater treatment and sprinkler systems are well-protected in polycarbonate Utility & Electrical - Utility applications that are housed outdoor are ideally enclosed in polycarbonate Marine & Marina - Whether on-ship or at the dock, guard against corrosive salt water and sun TABLE OF CONTENTS About Integra Enclosures Integra Story Polycarbonate & Fiberglass Comparison...6 Product Line Overview... 7 Premium Line Overview Impact Line Overview Genesis Line Overview x6x4 Premium x6x4 Premium x8x4 Premium x8x2 Premium x8x4 Premium x8x6 Premium x10x4 Premium x10x6 Premium x12x6 Premium x14x7 Premium x16x10 Premium x6x3 Impact x6x3 Impact x8x2 Impact x8x6 Impact x24x10 Genesis Genesis Series Option...46 Fan Shroud...47 Engineering Properties...48 Accessories - Premium Line Pole Mounting Kits Accessories - Impact Line Cord Grips Accessories - Genesis Line...55 Exploded View Assembly Instructions...56 Frequently Asked Questions (FAQs) NEMA / UL-50 Type Ratings Technical Information / Chemical Resistance Terms & Conditions of Sale...62 THE UNSURPASSED ADVANTAGES OF POLYCARBONATE ENCLOSURES UV Protection Fiberglass enclosures will bloom when exposed to sunlight and moisture. In fact, manufacturers of FRP enclosures recommend painting their products. This is not necessary with Integra thermoplastic enclosures. Outdoor UV exposure ratings for both the Premium and Impact lines are F1. See Engineering Properties on page 48 for more details. Impact Resistance The engineered thermoplastic enclosure has dramatically better impact resistance. For example, fiberglass typically has an impact resistance of less than 220 lb/in, while the Premium and Impact line enclosures have an impact resistance of over 900 lb/in. Thermoplastic enclosures are much easier and safer to machine, with none of the dust and splintering associated with fiberglass. TF: T: F:

4 THE INTEGRA STORY Why Integra If you are working on a new design that requires a NEMA 12/4X/6P, UL listed enclosure, here are some reasons you will want to consider Integra Our aesthetics will provide a unique new look for your products, making them stand out from the competition. At Integra, all we do is thermoplastic enclosures. We are focused on your specific requirements. Integra offers a full range of modification services, delivering enclosures to you ready to install components. Available factory-direct, Integra enclosures are shipped on your schedule. ECO FRIENDLY Manufactured, Assembled and stocked in Mentor, OH, USA Integra Enclosures manufactures and markets engineered thermoplastic enclosures designed for use in electrical construction, water treatment, car wash, telecommunication, instrumentation, utility, machine building, HVAC, or any other application requiring enclosures which are non-corrosive, nonconductive, easy to install and modify, and competitively priced. Integra Premium Line Enclosures all share the patented Integra Panel enclosure. This feature, along with several other design improvements over existing products, makes Integra an exciting alternative to the traditional suppliers in the market. Offering the best designs coupled with superior customer service, Integra is uniquely positioned to serve your enclosure needs. MADE IN THE USA 4 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

5 STANDARD PRODUCTS THE MOST WELL THOUGHT OUT ENCLOSURE AVAILABLE Super versatile, the enclosure panel suspension system in all of the Premium Line enclosures offers unsurpassed options for mounting back panels, face plates, circuit boards or any other component that needs to be secured. This feature, along with a wide selection of off-the-shelf accessories, allows extreme customization using standard products. Additional features: Rear-mounting bosses Swing panel Foot or flange mounting Clear lids Removable enclosure door Panel suspension DIN rails pre-cut for each enclosure size Vents for air flow Many other options MODIFIED PRODUCTS SPECIAL PRODUCTS Minimum quantity may apply FACTORY MODIFICATIONS. OUR PRODUCT, THE WAY YOU LIKE IT. Integra website. At Integra, most of our customers prefer to let us modify their enclosures prior to shipment on our CNC Machines. Drawings of all standard products are available for downloadable off the CUSTOM PRODUCTS Minimum quantity may apply Our newly-expanded manufacturing facility can handle your needs for: Drilling Holes CNC machine cut outs Silkscreen Graphic panels Custom enclosures Custom colors (minimum quantity) Custom back panels TF: T: F:

6 POLYCARBONATE & FIBERGLASS, WHICH IS BETTER? Feature Polycarbonate Fiberglass Impact resistance Weight UV resistance Ease of Eco-friendly Damage from shipping/handling The average fiberglass enclosure tensile strength is approximately 220 in/lb. Polycarbonate has a tensile strength of 900 in/lb. Whether it is saving on shipping cost or the ability for one person to carry and install a product in an enclosure, weight is increasingly important. Fiberglass UV protection is offered as a shield or other coating that attempts to protect the fibers from the inevitable deterioration or even failure of the exterior coating. With polycarbonate, the UV inhibitor Fiberglass is tough on tools and often chips while machining, leaving sharp, unsightly edges. Also, fiberglass, upon drilling or cutting gives off a very fine dust that is difficult to clean up and is a skin and lung irritant. Integra polycarbonate enclosures are easy to modify, do not give Whether during the manufacturing process or at the end of the enclosure s life, fiberglass material cannot be reused and is destined for landfills. Polycarbonate in the manufacturing process or at the end of its usable life is recyclable. Fiberglass is a very brittle material, to the point that it risks damage anytime it is dropped or mishandled in any way. Because of it s durability, STOP SETTLING FOR OUTDATED MATERIALS AND UPGRADE TO TODAY S TECHNOLOGY. Why stop there? Polycarbonate can be used to replace your steel, stainless steel or aluminum enclosures also. Durable, aesthetically pleasing, pad-lockable, and extremely versatile, Integra Enclosures are an upgrade to all but the most demanding metal enclosure applications. 6 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

7 INTEGRA STANDARD PRODUCTS OFFERING PREMIUM LINE Integra s traditional high impact polycarbonate enclosure offering including eleven sizes from 6x6x4 through 18x16x10 Light gray in color with high gloss finish Available in four configurations including screw cover, hinged w/ two screws, hinged w/four screws and hinged with locking latch All sizes and configurations are available in clear or opaque lid All sizes and configurations include enclosure foot mount or flange mount system Features Integra s unique T-Rail mounting system (brackets are option) for face plates, swing panels, layering back panels and/or infinitely variable back panel height Brass inserts for securing mounting feet or flange, optional back panel and lid UL/C-UL-50 listed Nema 1,2,3,3R,3S,4,4X,5,12,13 and ST series and HT-P series are Nema 6/6P, marine use rated IMPACT LINE Integra s more recent high impact polycarbonate enclosure offering including four sizes Light gray in color with high gloss finish Available in two hinge styles standard or low profile (P9082 standard only) Available in two latch styles, integrated or stainless steel locking latch (P9082 integrated only) Available sizes and styles available in clear or opaque lid Integrated mounting flanges Advanced interior mounting system for circuit boards, face plates, swing panels, etc. Self-tapping screws and molded-in bosses to secure optional back panel UL/C-UL-50 listed Nema 1,2,3,3R,3S,4,4X,5,6/6P,12,13 rated (locking latch not 6/6P rated) GENESIS LINE The MULTIple configurations for MAXimum options rail system provide unlimited mounting potential for your application. These rails mount vertically by attaching to the rear wall of the enclosure and to the Multi-Max frame. They can be used all around the interior of the enclosure to create three dimensional use of all of the space inside the enclosure. Uses for these A Multi-Max frame ring secures just inside the lip of the base with four Multi Max rails and combines with other molded features to provide un-matched rigidity to the Genesis enclosures. The genesis swing panel has an aluminum piano style hinge to support the weight of the typical larger enclosure applications. The swing panel attaches to the Multi Max rails and provides rigid smooth operation Multiple Latching Options Three point latch Quarter turn latch Non-metallic latch UL/C-UL-50 listed Nema 1,2,3,3R,3S,4,4X,5,12,13 rated ALL LINES ALSO AVAILABLE IN ABS & PPO (CONSULT FACTORY) TF: T: F:

8 PREMIUM LINE PREMIUM LINE OVERVIEW 900 inlb Impact Resistance Polycarbonate is known for it s high impact resistance and that is why we chose to use it as the material for our Premium Line Enclosures Wide Operating Temperature Range Polycarbonate is stable and holds it s tensile strength better than other non metallic materials over a temperature range from -40 deg F to 265 deg F. Crystal Clear Covers Clear covers are a superior alternative to mechanically affixed window kits. EZ Hinge Integra s standard hinges allow easy door removal or replacement while permitting a full 225 degree door swing. Unique T-Rail Panel Suspension System The optional brackets that attach to the T-Rails allow our customers to mount an individual mounting panel at any height in the enclosure or to even have multiple back panels at different heights. Who says you can t put more into an Integra enclosure? Molded in Mounting Bosses All of the Premium line enclosures have extra mounting bosses molded into the rear wall to permit #10 self tapping screws to secure din rail, circuit board, or any other device or component into the enclosure. Stainless Steel Latch Securely Attached The HL Premium enclosures include stainless steel latches that are bolted in place for a more secure system than pop rivets or slide on latches Full modifications services are available at Integra, including machining holes for displays, cable connectors, multi-pin connectors, antennae, etc. Call us to discuss your unique requirements. Customization Custom colors, custom back panels, silk screening, sub assembly of your product, or any other tailoring of our product to your need is our job. (Minimums may apply) Packaging Standard packaging is one unit per carton, packed to ensure safe delivery to your location. Or, if you have any special requirements for shipping, call us and we can work to meet your requirements. 8 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

9 PREMIUM LINE CLEAR COVER SWING OUT PANEL EZ HINGE DIN RAILS CUSTOMIZATION PANEL SUSPENSION WINDOW KITS AIR VENTS / FAN SHROUDS POLE MOUNTING KITS TF: T: F:

10 6X6X4 PREMIUM LINE ECO FRIENDLY MADE IN THE USA PREMIUM POLYCARBONATE ENCLOSURE 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel metal latched lids. Standard color light gray with a gloss finish. Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate. Easy ordering one part number includes base, lid, mounting feet or flanges and all lid fastening hardware (mounting panels sold separately). Flexible interior mounting features the unique and patented Integra adjustable depth T-Rail back panel mounting system (back panel and adjustable brackets sold separately). Features multiple bosses for easy installation of devices and DIN rails. UL-50 / c-ul Listed (files # E229365, # E207562) Our Premium Line enclosures are the most durable, aesthetically pleasing, non-metallic Nema UL rated enclosures available. From the extremely versatile mounting options inside the enclosure to having the most off-the-shelf accessories, the Integra Made In the USA Premium Line enclosures provide great value to any application. U L c U L Atex pending, contact factory for details Mechanical and Thermal Test Spec. Unit Premium Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 ksi 340 Flammable / UV Ratings Test Spec. Unit Premium Line Outdoor UV Exposure UL - F P/N 4X 6P Hinged Screw Opaque Clear Mounting Mounting Stainless Steel T-Rail IP66 IP68 Cover Cover Cover Cover Feet Flange Locking Latch System H6064S H6064SC H6064SF H6064SCF H6064H H6064HC H6064HF H6064HCF H6064HLL H6064HCLL H6064HFLL H6064HCFLL H6064H-6P H6064HC-6P H6064HF-6P H6064HCF-6P TORQUE SPECIFICATIONS - Mounting Brackets - 1/4-20 x 0.25 SS, countersunk phillips drive screws (torque limit = 20 in. lbs.) Covers / Doors - Torque for corner screws is 10 in. lbs. 10 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

11 6X6X4 PREMIUM LINE mm A mm mm mm mm mm.75 20mm.75 20mm mm mm mm A 3.63 TOP OF BACKPANEL mm B 3.98 TOP OF BACKPANEL mm mm mm mm B SECTION A A SECTION B B Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 6x6x4 Back Panels ABP66 - Aluminum panel SBP66 - Steel panel PVCBP66 - PVC panel (For complete accessories, see page 49-52) Aluminum Swing Out Panels ABP-66USP/USOPK - Complete panel kit ABP-66USP - Aluminum swing out panels only USOPK - Hardware only Back Panel Adjustment Kit BPAKG - Gray, Set Screw BPAKB - Black, Set Screw UBPAKG - Gray, Thumb Screw UBPAKB - Black Thumb Screw Air Vents VENT 1 - Aluminum louvered VENT 2 - Outdoor labyrinth Din Rail DIN 6-2 rails, 4 screws Steel Swing Out Panels SBP-66USP/USOPK - Complete panel kit SBP-66USP - Steel swing out panels only USOPK - Hardware only Pole Mounting Kit PMKG-26-2 pole PMKG-36-3 pole PMKG-46-4 pole PMKG pole Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details and part numbers. Mounting Feet & Flange Kits MFKG - Premium line feet MFKSS - Stainless steel feet MFLK6-6 Flange kit TF: T: F:

12 8X6X4 PREMIUM LINE ECO FRIENDLY MADE IN THE USA PREMIUM POLYCARBONATE ENCLOSURE 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel metal latched lids. Standard color light gray with a gloss finish. Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate. Easy ordering one part number includes base, lid, mounting feet or flanges and all lid fastening hardware (mounting panels sold separately). Flexible interior mounting features the unique and patented Integra adjustable depth T-Rail back panel mounting system (back panel and adjustable brackets sold separately). Features multiple bosses for easy installation of devices and DIN rails. UL-50 / c-ul Listed (files # E229365, # E207562) Our Premium Line enclosures are the most durable, aesthetically pleasing, non-metallic Nema UL rated enclosures available. From the extremely versatile mounting options inside the enclosure to having the most off-the-shelf accessories, the Integra Made In the USA Premium Line enclosures provide great value to any application. U L c U L Atex pending, contact factory for details Mechanical and Thermal Test Spec. Unit Premium Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 ksi 340 Flammable / UV Ratings Test Spec. Unit Premium Line Outdoor UV Exposure UL - F P/N 4X 6P Hinged Screw Opaque Clear Mounting Mounting Stainless Steel T-Rail IP66 IP68 Cover Cover Cover Cover Feet Flange Locking Latch System H8064S H8064SC H8064SF H8064SCF H8064H H8064HC H8064HF H8064HCF H8064HLL H8064HCLL H8064HFLL H8064HCFLL H8064H-6P H8064HC-6P H8064HF-6P H8064HCF-6P TORQUE SPECIFICATIONS - Mounting Brackets - 1/4-20 x 0.25 SS, countersunk phillips drive screws (torque limit = 20 in. lbs.) Covers / Doors - Torque for corner screws is 10 in. lbs. 12 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

13 .87 22mm mm 8X6X4 PREMIUM LINE A mm mm mm mm mm mm mm mm A 4.00 TOP OF BACKPANEL mm B 3.96 TOP OF BACKPANEL mm mm mm mm SECTION B-B B SECTION A-A Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 8x6x4 Back Panels ABP86 - Aluminum panel SBP86 - Steel panel PVCBP86 - PVC panel (For complete accessories, see page 49-52) Aluminum Swing Out Panels ABP-86USP/USOPK - Complete panel kit ABP-86USP - Aluminum swing out panels only USOPK - Hardware only Back Panel Adjustment Kit BPAKG - Gray, Set Screw BPAKB - Black, Set Screw UBPAKG - Gray, Thumb Screw UBPAKB - Black Thumb Screw Air Vents VENT 1 - Aluminum louvered VENT 2 - Outdoor labyrinth Din Rail DIN 6-2 rails, 4 screws Steel Swing Out Panels SBP-86USP/USOPK - Complete panel kit SBP-86USP - Steel swing out panels only USOPK - Hardware only Pole Mounting Kit PMKG-26-2 pole PMKG-36-3 pole PMKG-46-4 pole PMKG pole Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details and part numbers. Mounting Feet & Flange Kits MFKG - Premium line feet MFKSS - Stainless steel feet MFLK6-6 Flange kit TF: T: F:

14 8X8X4 PREMIUM LINE ECO FRIENDLY MADE IN THE USA PREMIUM POLYCARBONATE ENCLOSURE 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel metal latched lids. Standard color light gray with a gloss finish. Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate. Easy ordering one part number includes base, lid, mounting feet or flanges and all lid fastening hardware (mounting panels sold separately). Flexible interior mounting features the unique and patented Integra adjustable depth T-Rail back panel mounting system (back panel and adjustable brackets sold separately). Features multiple bosses for easy installation of devices and DIN rails. UL-50 / c-ul Listed (files # E229365, # E207562) Our Premium Line enclosures are the most durable, aesthetically pleasing, non-metallic Nema UL rated enclosures available. From the extremely versatile mounting options inside the enclosure to having the most off-the-shelf accessories, the Integra Made In the USA Premium Line enclosures provide great value to any application. U L c U L Atex pending, contact factory for details Mechanical and Thermal Test Spec. Unit Premium Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 ksi 340 Flammable / UV Ratings Test Spec. Unit Premium Line Outdoor UV Exposure UL - F P/N 4X 6P Hinged Screw Opaque Clear Mounting Mounting Stainless Steel T-Rail IP66 IP68 Cover Cover Cover Cover Feet Flange Locking Latch System H8084S H8084SC H8084SF H8084SCF H8084H H8084HC H8084HF H8084HCF H8084HLL H8084HCLL H8084HFLL H8084HCFLL H8084H-6P H8084HC-6P H8084HF-6P H8084HCF-6P TORQUE SPECIFICATIONS - Mounting Brackets - 1/4-20 x 0.25 SS, countersunk phillips drive screws (torque limit = 20 in. lbs.) Covers / Doors - Torque for corner screws is 10 in. lbs. 14 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

15 8X8X4 PREMIUM LINE.87 22mm mm A mm mm mm mm mm mm mm A 5.25 TOP OF BACKPANEL mm B 6.00 TOP OF BACKPANEL mm mm mm mm B SECTION A-A SECTION B-B Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 8x8x4 Back Panels ABP88 - Aluminum panel SBP88 - Steel panel PVCBP88 - PVC panel (For complete accessories, see page 49-52) Aluminum Swing Out Panels ABP-88USP/USOPK - Complete panel kit ABP-88USP - Aluminum swing out panels only USOPK - Hardware only Back Panel Adjustment Kit BPAKG - Gray, Set Screw BPAKB - Black, Set Screw UBPAKG - Gray, Thumb Screw UBPAKB - Black Thumb Screw Air Vents VENT 1 - Aluminum louvered VENT 2 - Outdoor labyrinth Din Rail DIN 8-2 rails, 4 screws Steel Swing Out Panels SBP-88USP/USOPK - Complete panel kit SBP-88USP - Steel swing out panels only USOPK - Hardware only Pole Mounting Kit PMKG-28-2 pole PMKG-38-3 pole PMKG-48-4 pole PMKG pole Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details and part numbers. Mounting Feet & Flange Kits MFKG - Premium line feet MFKSS - Stainless steel feet MFLK8-8 Flange kit TF: T: F:

16 10X8X2 PREMIUM LINE ECO FRIENDLY MADE IN THE USA PREMIUM POLYCARBONATE ENCLOSURE 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel metal latched lids. Standard color light gray with a gloss finish. Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate. Easy ordering one part number includes base, lid, mounting feet or flanges and all lid fastening hardware (mounting panels sold separately). Flexible interior mounting features the unique and patented Integra adjustable depth T-Rail back panel mounting system (back panel and adjustable brackets sold separately). Features multiple bosses for easy installation of devices and DIN rails. UL-50 / c-ul Listed (files # E229365, # E207562) Our Premium Line enclosures are the most durable, aesthetically pleasing, non-metallic Nema UL rated enclosures available. From the extremely versatile mounting options inside the enclosure to having the most off-the-shelf accessories, the Integra Made In the USA Premium Line enclosures provide great value to any application. U L c U L Atex pending, contact factory for details Mechanical and Thermal Test Spec. Unit Premium Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 ksi 340 Flammable / UV Ratings Test Spec. Unit Premium Line Outdoor UV Exposure UL - F1 IP66 IP68 Cover Cover Cover Cover Feet Flange Locking Latch System H10082S H10082SC H10082SF H10082SCF H10082H H10082HC H10082HF H10082HCF H10082HLL H10082HCLL H10082HFLL H10082HCFLL H10082H-6P H10082HC-6P H10082HF-6P H10082HCF-6P TORQUE SPECIFICATIONS - Mounting Brackets - 1/4-20 x 0.25 SS, countersunk phillips drive screws (torque limit = 20 in. lbs.) Covers / Doors - Torque for corner screws is 10 in. lbs. 16 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

17 10X8X2 PREMIUM LINE.82 21mm mm A mm mm mm mm mm mm mm mm mm A mm mm 9.94 / Top of Bosses B 7.94 / Top of Bosses A mm A mm mm A3 B SECTION A-A SECTION B-B Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 10x8x2 Back Panels ABP Aluminum panel SBP Steel panel PVCBP PVC panel (For complete accessories, see page 49-52) Aluminum Swing Out Panels ABP-108USP/USOPK - Complete panel kit ABP-108USP - Aluminum swing out panels only USOPK - Hardware only Back Panel Adjustment Kit BPAKG - Gray, Set Screw BPAKB - Black, Set Screw UBPAKG - Gray, Thumb Screw UBPAKB - Black Thumb Screw Air Vents VENT 1 - Aluminum louvered VENT 2 - Outdoor labyrinth Din Rail DIN 8-2 rails, 4 screws Steel Swing Out Panels SBP-108USP/USOPK - Complete panel kit BSP-108USP - Steel swing out panels only USOPK - Hardware only Pole Mounting Kit PMKG-28-2 pole PMKG-38-3 pole PMKG-48-4 pole PMKG pole Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details and part numbers. Mounting Feet & Flange Kits MFKG - Premium line feet MFKSS - Stainless steel feet MFLK8-8 Flange kit TF: T: F:

18 10X8X4 PREMIUM LINE ECO FRIENDLY MADE IN THE USA PREMIUM POLYCARBONATE ENCLOSURE 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel metal latched lids. Standard color light gray with a gloss finish. Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate. Easy ordering one part number includes base, lid, mounting feet or flanges and all lid fastening hardware (mounting panels sold separately). Flexible interior mounting features the unique and patented Integra adjustable depth T-Rail back panel mounting system (back panel and adjustable brackets sold separately). Features multiple bosses for easy installation of devices and DIN rails. UL-50 / c-ul Listed (files # E229365, # E207562) Our Premium Line enclosures are the most durable, aesthetically pleasing, non-metallic Nema UL rated enclosures available. From the extremely versatile mounting options inside the enclosure to having the most off-the-shelf accessories, the Integra Made In the USA Premium Line enclosures provide great value to any application. U L c U L Atex pending, contact factory for details Mechanical and Thermal Test Spec. Unit Premium Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 ksi 340 Flammable / UV Ratings Test Spec. Unit Premium Line Outdoor UV Exposure UL - F P/N 4X 6P Hinged Screw Opaque Clear Mounting Mounting Stainless Steel T-Rail IP66 IP68 Cover Cover Cover Cover Feet Flange Locking Latch System H10084S H10084SC H10084SF H10084SCF H10084H H10084HC H10084HF H10084HCF H10084HLL H10084HCLL H10084HFLL H10084HCFLL H10084H-6P H10084HC-6P H10084HF-6P H10084HCF-6P TORQUE SPECIFICATIONS - Mounting Brackets - 1/4-20 x 0.25 SS, countersunk phillips drive screws (torque limit = 20 in. lbs.) Covers / Doors - Torque for corner screws is 10 in. lbs. 18 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

19 10X8X4 PREMIUM LINE.82 21mm A mm mm mm mm mm mm mm mm mm mm A mm mm / Top of Backpanel B 8.01 / Top of Backpanel A mm mm A2 A mm B SECTION A-A SECTION B-B Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 10x8x4 Back Panels ABP108 - Aluminum panel SBP108 - Steel panel PVCBP108 - PVC panel (For complete accessories, see page 49-52) Aluminum Swing Out Panels ABP-108USP/USOPK - Complete panel kit ABP-108USP - Aluminum swing out panels only SOPK - Hardware only Back Panel Adjustment Kit BPAKG - Gray, Set Screw BPAKB - Black, Set Screw UBPAKG - Gray, Thumb Screw UBPAKB - Black Thumb Screw Air Vents VENT 1 - Aluminum louvered VENT 2 - Outdoor labyrinth Din Rail DIN 8-2 rails, 4 screws Steel Swing Out Panels SBP-108USP/USOPK - Complete panel kit SBP-108USP - Steel swing out panels only SOPK - Hardware only Pole Mounting Kit PMKG-28-2 pole PMKG-38-3 pole PMKG-48-4 pole PMKG pole Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details and part numbers. Mounting Feet & Flange Kits MFKG - Premium line feet MFKSS - Stainless steel feet MFLK8-8 Flange kit TF: T: F:

20 10X8X6 PREMIUM LINE ECO FRIENDLY MADE IN THE USA PREMIUM POLYCARBONATE ENCLOSURE 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel metal latched lids. Standard color light gray with a gloss finish. Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate. Easy ordering one part number includes base, lid, mounting feet or flanges and all lid fastening hardware (mounting panels sold separately). Flexible interior mounting features the unique and patented Integra adjustable depth T-Rail back panel mounting system (back panel and adjustable brackets sold separately). Features multiple bosses for easy installation of devices and DIN rails. UL-50 / c-ul Listed (files # E229365, # E207562) Our Premium Line enclosures are the most durable, aesthetically pleasing, non-metallic Nema UL rated enclosures available. From the extremely versatile mounting options inside the enclosure to having the most off-the-shelf accessories, the Integra Made In the USA Premium Line enclosures provide great value to any application. U L c U L Atex pending, contact factory for details Mechanical and Thermal Test Spec. Unit Premium Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 ksi 340 Flammable / UV Ratings Test Spec. Unit Premium Line Outdoor UV Exposure UL - F P/N 4X 6P Hinged Screw Opaque Clear Mounting Mounting Stainless Steel T-Rail IP66 IP68 Cover Cover Cover Cover Feet Flange Locking Latch System H10086S H10086SC H10086SF H10086SCF H10086H H10086HC H10086HF H10086HCF H10086HLL H10086HCLL H10086HFLL H10086HCFLL H10086H-6P H10086HC-6P H10086HF-6P H10086HCF-6P TORQUE SPECIFICATIONS - Mounting Brackets - 1/4-20 x 0.25 SS, countersunk phillips drive screws (torque limit = 20 in. lbs.) Covers / Doors - Torque for corner screws is 10 in. lbs. 20 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

21 10X8X6 PREMIUM LINE.82 21mm mm A mm mm mm mm mm mm mm mm mm A mm 9.94 / Top of Backpanel B 6.00 TOP OF BACKPANEL mm 259mm A / 185mm A mm mm A3 B SECTION A-A SECTION B-B Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 10x8x6 Back Panels ABP108 - Aluminum panel SBP108 - Steel panel PVCBP108 - PVC panel (For complete accessories, see page 49-52) Aluminum Swing Out Panels ABP-108USP/USOPK - Complete panel kit ABP-108USP - Aluminum swing out panels only USOPK - Hardware only Back Panel Adjustment Kit BPAKG - Gray, Set Screw BPAKB - Black, Set Screw UBPAKG - Gray, Thumb Screw UBPAKB - Black Thumb Screw Air Vents VENT 1 - Aluminum louvered VENT 2 - Outdoor labyrinth Din Rail DIN 8-2 rails, 4 screws Steel Swing Out Panels SBP-108USP/USOPK - Complete panel kit SBP-108USP - Steel swing out panels only USOPK - Hardware only Pole Mounting Kit PMKG-28-2 pole PMKG-38-3 pole PMKG-48-4 pole PMKG pole Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details and part numbers. Mounting Feet & Flange Kits MFKG - Premium line feet MFKSS - Stainless steel feet MFLK8-8 Flange kit TF: T: F:

22 12X10X4 PREMIUM LINE PREMIUM POLYCARBONATE ENCLOSURE ECO FRIENDLY MADE IN THE USA 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel metal latched lids. Standard color light gray with a gloss finish. Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate. Easy ordering one part number includes base, lid, mounting feet or flanges and all lid fastening hardware (mounting panels sold separately). Flexible interior mounting features the unique and patented Integra adjustable depth T-Rail back panel mounting system (back panel and adjustable brackets sold separately). Features multiple bosses for easy installation of devices and DIN rails. UL-50 / c-ul Listed (files # E229365, # E207562) Our Premium Line enclosures are the most durable, aesthetically pleasing, non-metallic Nema UL rated enclosures available. From the extremely versatile mounting options inside the enclosure to having the most off-the-shelf accessories, the Integra Made In the USA Premium Line enclosures provide great value to any application. U L c U L Atex pending, contact factory for details Mechanical and Thermal Test Spec. Unit Premium Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 ksi 340 Flammable / UV Ratings Test Spec. Unit Premium Line Outdoor UV Exposure UL - F1 IP66 IP68 Cover Cover Cover Cover Feet Flange Locking Latch System H12104S H12104SC H12104SF H12104SCF H12104H H12104HC H12104HF H12104HCF H12104HLL H12104HCLL H12104HFLL H12104HCFLL H12104H-6P H12104HC-6P H12104HF-6P H12104HCF-6P TORQUE SPECIFICATIONS - Mounting Brackets - 1/4-20 x 0.25 SS, countersunk phillips drive screws (torque limit = 20 in. lbs.) Covers / Doors - Torque for corner screws is 10 in. lbs. 22 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

23 12X10X4 PREMIUM LINE.82 21mm A mm mm mm mm mm mm mm mm mm mm mm A mm 8.00 TOP OF BACKPANEL mm TOP OF BACKPANEL mm mm mm mm mm B SECTION A-A SECTION B-B Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 12x10x4 Back Panels ABP Aluminum panel SBP Steel panel PVCBP PVC panel (For complete accessories, see page 49-52) Aluminum Swing Out Panels ABP-1210USP/USOPK - Complete panel kit ABP-1210USP - Aluminum swing out panels only USOPK - Hardware only Back Panel Adjustment Kit BPAKG - Gray, Set Screw BPAKB - Black, Set Screw UBPAKG - Gray, Thumb Screw UBPAKB - Black Thumb Screw Air Vents / Fan Shrouds VENT 1-3 Aluminum louvered VENT 2 - Outdoor labyrinth FS KIT1-1 piece kit FS KIT2-2 piece kit Specifications on page 47 Din Rail DIN 10-2 rails, 4 screws Steel Swing Out Panels SBP-1210USP/USOPK - Complete panel kit SBP-1210USP - Steel swing out panels only USOPK - Hardware only Pole Mounting Kit PMKG pole PMKG pole PMKG pole PMKG pole Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details and part numbers. Mounting Feet & Flange Kits MFKG - Premium line feet MFKSS - Stainless steel feet MFLK10-10 Flange kit TF: T: F:

24 12X10X6 PREMIUM LINE PREMIUM POLYCARBONATE ENCLOSURE ECO FRIENDLY MADE IN THE USA 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel metal latched lids. Standard color light gray with a gloss finish. Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate. Easy ordering one part number includes base, lid, mounting feet or flanges and all lid fastening hardware (mounting panels sold separately). Flexible interior mounting features the unique and patented Integra adjustable depth T-Rail back panel mounting system (back panel and adjustable brackets sold separately). Features multiple bosses for easy installation of devices and DIN rails. UL-50 / c-ul Listed (files # E229365, # E207562) Our Premium Line enclosures are the most durable, aesthetically pleasing, non-metallic Nema UL rated enclosures available. From the extremely versatile mounting options inside the enclosure to having the most off-the-shelf accessories, the Integra Made In the USA Premium Line enclosures provide great value to any application. U L c U L Atex pending, contact factory for details Mechanical and Thermal Test Spec. Unit Premium Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 ksi 340 Flammable / UV Ratings Test Spec. Unit Premium Line Outdoor UV Exposure UL - F1 IP66 IP68 Cover Cover Cover Cover Feet Flange Locking Latch System H12106S H12106SC H12106SF H12106SCF H12106H H12106HC H12106HF H12106HCF H12106HLL H12106HCLL H12106HFLL H12106HCFLL H12106H-6P H12106HC-6P H12106HF-6P H12106HCF-6P TORQUE SPECIFICATIONS - Mounting Brackets - 1/4-20 x 0.25 SS, countersunk phillips drive screws (torque limit = 20 in. lbs.) Covers / Doors - Torque for corner screws is 10 in. lbs. 24 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

25 12X10X6 PREMIUM LINE.82 21mm mm A mm mm mm mm mm mm mm mm mm mm A 7.63 TOP OF BACKPANEL mm TOP OF BACKPANEL mm mm mm mm mm mm B SECTION A-A SECTION B-B Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 12x10x6 Back Panels ABP Aluminum panel SBP Steel panel PVCBP PVC panel (For complete accessories, see page 49-52) Aluminum Swing Out Panels ABP-1210USP/USOPK - Complete panel kit ABP-1210USP - Aluminum swing out panels only SOPK - Hardware only Back Panel Adjustment Kit BPAKG - Gray, Set Screw BPAKB - Black, Set Screw UBPAKG - Gray, Thumb Screw UBPAKB - Black Thumb Screw Air Vents / Fan Shrouds VENT 1-3 Aluminum louvered VENT 2 - Outdoor labyrinth FS KIT1-1 piece kit FS KIT2-2 piece kit Specifications on page 47 Din Rail DIN 10-2 rails, 4 screws Steel Swing Out Panels SBP-1210USP/USOPK - Complete panel kit SBP-1210USP - Steel swing out panels only SOPK - Hardware only Pole Mounting Kit PMKG pole PMKG pole PMKG pole PMKG pole Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details and part numbers. Mounting Feet & Flange Kits MFKG - Premium line feet MFKSS - Stainless steel feet MFLK10-10 Flange kit TF: T: F:

26 14X12X6 PREMIUM LINE PREMIUM POLYCARBONATE ENCLOSURE ECO FRIENDLY MADE IN THE USA 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel metal latched lids. Standard color light gray with a gloss finish. Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate. Easy ordering one part number includes base, lid, mounting feet or flanges and all lid fastening hardware (mounting panels sold separately). Flexible interior mounting features the unique and patented Integra adjustable depth T-Rail back panel mounting system (back panel and adjustable brackets sold separately). Features multiple bosses for easy installation of devices and DIN rails. UL-50 / c-ul Listed (files # E229365, # E207562) Our Premium Line enclosures are the most durable, aesthetically pleasing, non-metallic Nema UL rated enclosures available. From the extremely versatile mounting options inside the enclosure to having the most off-the-shelf accessories, the Integra Made In the USA Premium Line enclosures provide great value to any application. U L c U L Atex pending, contact factory for details Mechanical and Thermal Test Spec. Unit Premium Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 ksi 340 Flammable / UV Ratings Test Spec. Unit Premium Line Outdoor UV Exposure UL - F1 IP66 IP68 Cover Cover Cover Cover Feet Flange Locking Latch System H141206S H141206SC H141206SF H141206SCF H141206H H141206HC H141206HF H141206HCF H141206HLL H141206HCLL H141206HFLL H141206HCFLL H141206H-6P H141206HC-6P H141206HF-6P H141206HCF-6P TORQUE SPECIFICATIONS - Mounting Brackets - 1/4-20 x 0.25 SS, countersunk phillips drive screws (torque limit = 20 in. lbs.) Covers / Doors - Torque for corner screws is 10 in. lbs. 26 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

27 14X12X6 PREMIUM LINE.79 20mm mm A mm mm mm mm mm mm mm mm 2.50 TOP OF BACKPANEL B A mm TOP OF BACKPANEL mm mm mm mm mm mm B SECTION A-A SECTION B-B Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 14x12x6 Back Panels ABP Aluminum panel SBP Steel panel PVCBP PVC panel (For complete accessories, see page 49-52) Aluminum Swing Out Panels ABP-1412USP/USOPK - Complete panel kit ABP-1412USP - Aluminum swing out panels only USOPK - Hardware only Back Panel Adjustment Kit BPAKG - Gray, Set Screw BPAKB - Black, Set Screw UBPAKG - Gray, Thumb Screw UBPAKB - Black Thumb Screw Air Vents / Fan Shrouds VENT 1-3 Aluminum louvered VENT 2 - Outdoor labyrinth FS KIT1-1 piece kit FS KIT2-2 piece kit Specifications on page 47 Din Rail DIN 12-2 rails, 4 screws Steel Swing Out Panels SBP-1412USP/USOPK - Complete panel kit SBP-1412USP - Steel swing out panels only USOPK - Hardware only Pole Mounting Kit PMKG pole PMKG pole PMKG pole PMKG pole Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details and part numbers. Mounting Feet & Flange Kits MFKG - Premium line feet MFKSS - Stainless steel feet MFLK12-12 Flange kit TF: T: F:

28 16X14X7 PREMIUM LINE PREMIUM POLYCARBONATE ENCLOSURE ECO FRIENDLY MADE IN THE USA 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel metal latched lids. Standard color light gray with a gloss finish. Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate. Easy ordering one part number includes base, lid, mounting feet or flanges and all lid fastening hardware (mounting panels sold separately). Flexible interior mounting features the unique and patented Integra adjustable depth T-Rail back panel mounting system (back panel and adjustable brackets sold separately). Features multiple bosses for easy installation of devices and DIN rails. UL-50 / c-ul Listed (files # E229365, # E207562) Our Premium Line enclosures are the most durable, aesthetically pleasing, non-metallic Nema UL rated enclosures available. From the extremely versatile mounting options inside the enclosure to having the most off-the-shelf accessories, the Integra Made In the USA Premium Line enclosures provide great value to any application. U L c U L Atex pending, contact factory for details Mechanical and Thermal Test Spec. Unit Premium Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 ksi 340 Flammable / UV Ratings Test Spec. Unit Premium Line Outdoor UV Exposure UL - F P/N 4X 6P Hinged Screw Opaque Clear Mounting Mounting Stainless Steel T-Rail IP66 IP68 Cover Cover Cover Cover Feet Flange Locking Latch System H161407S H161407SC H161407SF H161407SCF H161407H H161407HC H161407HF H161407HCF H161407HLL H161407HCLL H161407HFLL H161407HCFLL H161407H-6P H161407HC-6P H161407HF-6P H161407HCF-6P TORQUE SPECIFICATIONS - Mounting Brackets - 1/4-20 x 0.25 SS, countersunk phillips drive screws (torque limit = 20 in. lbs.) Covers / Doors - Torque for corner screws is 10 in. lbs. 28 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

29 16X14X7 PREMIUM LINE A mm mm mm mm mm mm mm mm mm mm mm mm A TOP OF BACKPANEL mm TOP OF BACKPANEL mm mm mm mm mm mm B SECTION A-A SECTION B-B Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 16x14x7 Back Panels ABP Aluminum panel SBP Steel panel PVCBP PVC panel Air Vents / Fan Shrouds VENT 1-3 Aluminum louvered VENT 2 - Outdoor labyrinth FS KIT1-1 piece kit FS KIT2-2 piece kit Specifications on page 47 (For complete accessories, see page 49-52) Aluminum Swing Out Panels ABP-1614USP/USOPK - Complete panel kit ABP-1614USP - Aluminum swing out panels only USOPK - Hardware only Steel Swing Out Panels SBP-1614USP/USOPK - Complete panel kit SBP-1614USP - Steel swing out panels only USOPK - Hardware only Back Panel Adjustment Kit BPAKG - Gray, Set Screw BPAKB - Black, Set Screw UBPAKG - Gray, Thumb Screw UBPAKB - Black Thumb Screw Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details and part numbers. Din Rail DIN 14-2 rails, 4 screws Pole Mounting Kit PMKG pole PMKG pole PMKG pole PMKG pole Mounting Feet & Flange Kits MFKG - Premium line feet MFKSS - Stainless steel feet MFLK14-14 Flange kit TF: T: F:

30 18X16X10 PREMIUM LINE PREMIUM POLYCARBONATE ENCLOSURE ECO FRIENDLY MADE IN THE USA 16 Standard configurations including hinged or non-hinged lids in 2-screw, 4-screw, or stainless steel metal latched lids. Standard color light gray with a gloss finish. Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate. Easy ordering one part number includes base, lid, mounting feet or flanges and all lid fastening hardware (mounting panels sold separately). Flexible interior mounting features the unique and patented Integra adjustable depth T-Rail back panel mounting system (back panel and adjustable brackets sold separately). Features multiple bosses for easy installation of devices and DIN rails. UL-50 / c-ul Listed (files # E229365, # E207562) Our Premium Line enclosures are the most durable, aesthetically pleasing, non-metallic Nema UL rated enclosures available. From the extremely versatile mounting options inside the enclosure to having the most off-the-shelf accessories, the Integra Made In the USA Premium Line enclosures provide great value to any application. U L c U L Atex pending, contact factory for details Mechanical and Thermal Test Spec. Unit Premium Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 ksi 340 Flammable / UV Ratings Test Spec. Unit Premium Line Outdoor UV Exposure UL - F P/N 4X 6P Hinged Screw Opaque Clear Mounting Mounting Stainless Steel T-Rail IP66 IP68 Cover Cover Cover Cover Feet Flange Locking Latch System H181610S H181610SC H181610SF H181610SCF H181610H H181610HC H181610HF H181610HCF H181610HLL H181610HCLL H181610HFLL H181610HCFLL H181610H-6P H181610HC-6P H181610HF-6P H181610HCF-6P TORQUE SPECIFICATIONS - Mounting Brackets - 1/4-20 x 0.25 SS, countersunk phillips drive screws (torque limit = 20 in. lbs.) Covers / Doors - Torque for corner screws is 10 in. lbs. 30 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

31 18X16X10 PREMIUM LINE.73 19mm mm A mm mm mm mm mm mm mm mm mm mm A mm TOP OF BACKPANEL B mm TOP OF BACKPANEL mm mm mm SECTION A-A Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 18x16x10 Back Panels ABP Aluminum panel SBP Steel panel PVCBP PVC panel B (For complete accessories, see page 49-52) Aluminum Swing Out Panels ABP-1816USP/USOPK - Complete panel kit ABP-1816USP - Aluminum swing out panels only USOPK - Hardware only SECTION B-B Back Panel Adjustment Kit BPAKG - Gray, Set Screw BPAKB - Black, Set Screw UBPAKG - Gray, Thumb Screw UBPAKB - Black Thumb Screw Air Vents / Fan Shrouds VENT 1-3 Aluminum louvered VENT 2 - Outdoor labyrinth FS KIT1-1 piece kit FS KIT2-2 piece kit Specifications on page 47 Din Rail DIN 16-2 rails, 4 screws Steel Swing Out Panels SBP-1816USP/USOPK - Complete panel kit SBP-1816USP - Steel swing out panels only USOPK - Hardware only Pole Mounting Kit PMKG pole PMKG pole PMKG pole PMKG pole Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details and part numbers. Mounting Feet & Flange Kits MFKG - Premium line feet MFKSS - Stainless steel feet MFLK16-16 Flange kit TF: T: F:

32 IMPACT LINE IMPACT LINE OVERVIEW - 100% NON-METALIC 900 inlb Impact Resistance Polycarbonate is known for it s high impact resistance and that is why we chose to use it as the material for our Premium Line Enclosures Wide Operating Temperature Range Polycarbonate is stable and holds it s tensile strength better than other non metallic materials over a temperature range from -40 deg F to 265 deg F. Crystal Clear Covers Clear covers are a superior alternative to mechanically Integra s standard hinges allow easy door removal or replacement while permitting a full 225 degree door provides a cleaner look to the enclosure. Integrated Flanges All Impact series enclosures eliminate the need to Integrated Latch The integrated latch provides for a very clean look and easy opening of the enclosure. This latch is available on available on most sizes. (Stainless steel latch not Advanced Face Plate System all that is needed to quickly and cleanly install the face Advanced Swing Panel System that is needed to quickly and cleanly install the swing Molded in Mounting Bosses other device or component into the enclosure. Stainless Steel Latch Securely Attached steel latches that are bolted in place for a more secure system than pop rivets or slide on latches. - your unique requirements. Customization Packaging ensure safe delivery to your location. If you have any special requirements for work to meet your requirements. 32 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

33 IMPACT LINE EZ OR LOW PROFILE HINGES CLEAR COVER INTEGRATED & LOCKING LATCHES Integra s standard hinges allow easy door removal or replacement while permitting a full 225 degree door swing. The new low a cleaner look to the enclosure. Clear covers are a superior alternative to All Impact enclosures are available standard with the integrated locking latch. The LL steel latches that are bolted in place. SWING OUT PANEL KITS SWING PANEL AND FACE PLATE ASSEMBLY IMPACT FACE PLATE KIT ASSEMBLY IMPACT SWING PANEL KIT ASSEMBLY panel is all that is needed to quickly and cleanly install the swing panels system. CORD GRIPS Integrated Mounting Flanges IP68/NEMA 4X/6P Rated UL 94 V0 Flame Rated Neoprene Sealing Grommet Polyamide Construction It s as easy as one, two, three... FACE PLATE System 1. Install Four #8 self tapping screws to secure the brackets to the enclosure 2. Install Four #8 self-tapping screws to secure the face plate to brackets 3. You re done SWING PANEL System 1. Install Four #8 self tapping screws to secure the brackets to the enclosure 2. Install Four or Six(your choice) #8 self-tapping screws to secure the swing panel to the brackets 3. You re done TF: T: F:

34 6X6X3 IMPACT LINE ECO FRIENDLY MADE IN THE USA Mechanical and Thermal Test Spec. Unit Impact Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 Flammable / UV Ratings Test Spec. Unit Impact Line Outdoor UV Exposure UL - F1 IMPACT Up to eight standard configurations available with Integra s standard EZ hinge or our new Low Profile hinge and either Integra s patented integrated latch or a stainless steel latch. Standard Color light gray with a high gloss finish Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate Easy ordering One part number equals one completely assembled enclosure Super easy use mounting flanges integral, so no extra hardware needed Flexible interior Mounting bosses on rear wall and lid of opaque enclosure provide multiple mounting options for din rail, back panels, or other components Advanced face plate mounting system Brand new completely unique and easy Advanced swing panel mounting system Brand new completely unique and easy Secure Choose your level of protection: pad lockable, tamper screw or tamper tag capable Frequency Friendly Available with absolutely no metals of any kind on the enclosure which is extremely favorable for sending and receiving wireless signals UL-50 / c-ul Listed (file # E207562) Our Impact Line enclosures are the most versatile, feature packed, aesthetically pleasing, Nema UL rated, non-metallic enclosures available. Features like extremely durable, UV resistant, wide temperature range, easy to machine, lighter than other non-metallic or metal materials, the Made in USA Impact Line enclosures provide great value to any application. U L c U L Atex pending contact factory for details P6063 Integraged Integrated Stainless PCB Face IP66 IP68 Cover Cover Flange Hinge Hinge Latch Locking Latch System System* P6063 P6063C P6063LL P6063CLL P6063LP P6063LPC P6063LPLL P6063LPCLL * Sold separately 34 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

35 6X6X3 IMPACT LINE 7.36 / 187mm 4.80 / 122mm 4.00 / 102mm.31 8mm 4.25 / 108mm mm mm mm mm mm.75 / 19mm 4.25 / 108mm mm mm mm 4.88 / 124mm 6.92 / 176mm 4.80 / 122mm.33 8mm 4.00 / 106mm.31 / 8mm mm mm mm B B mm.32 8mm mm mm 7.72 / 196mm mm 6.54 / 166mm mm Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 6x6x3 Impact (For complete accessories, see page 52-54) Back Panels ABP66-IMP - Aluminum panel SBP66-IMP - Steel panel PVCBP66-IMP - PVC panel Air Vents VENT 1 - Aluminum louvered VENT 2 - Outdoor labyrinth Din Rail DIN 6-IMP - 2 rails, 4 screws Aluminum Swing Out System ASWPK66-IMP Aluminum swing panel and SOPK-IMP mounting kit ASWP66-IMP - Aluminum swing panel only SOPK66/86-IMP - 2 Ridget brackets, 1 pivot bracket & 8 self-tapping screws Steel Swing Out System SSWPK66-IMP Steel swing panel and SOPK-IMP mounting kit SSWP66-IMP - Steel swing panel only SOPK66/86-IMP - 2 Ridget brackets, 1 pivot bracket & 8 self-tapping screws Pole Mounting Kit PMKG-26-IMP - 2 pole PMKG-36-IMP - 3 pole PMKG-46-IMP - 4 pole PMKG-126-IMP - 12 pole Aluminum Face Plate System AFPK66-IMP - Aluminum face plate and SOPK-IMP mounting kit AFP66-IMP - Aluminum face panel only SOPK66/86-IMP - 2 Ridget brackets, 1 pivot bracket & 8 self-tapping screws Steel Face Plate System SFPK66-IMP - Steel face plate and SOPK-IMP mounting kit SFP66-IMP - Steel face panel only SOPK66/86-IMP - 2 Ridget brackets, 1 pivot bracket & 8 self-tapping screws Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details. TF: T: F:

36 8X6X3 IMPACT LINE ECO FRIENDLY MADE IN THE USA Mechanical and Thermal Test Spec. Unit Impact Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 Flammable / UV Ratings Test Spec. Unit Impact Line Outdoor UV Exposure UL - F1 IMPACT Up to eight standard configurations available with Integra s standard EZ hinge or our new Low Profile hinge and either Integra s patented integrated latch or a stainless steel latch. Standard Color light gray with a high gloss finish Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate Easy ordering One part number equals one completely assembled enclosure Super easy use mounting flanges integral, so no extra hardware needed Flexible interior Mounting bosses on rear wall and lid of opaque enclosure provide multiple mounting options for din rail, back panels, or other components Advanced face plate mounting system Brand new completely unique and easy Advanced swing panel mounting system Brand new completely unique and easy Secure Choose your level of protection: pad lockable, tamper screw or tamper tag capable Frequency Friendly Available with absolutely no metals of any kind on the enclosure which is extremely favorable for sending and receiving wireless signals UL-50 / c-ul Listed (file # E207562) Our Impact Line enclosures are the most versatile, feature packed, aesthetically pleasing, Nema UL rated, non-metallic enclosures available. Features like extremely durable, UV resistant, wide temperature range, easy to machine, lighter than other non-metallic or metal materials, the Made in USA Impact Line enclosures provide great value to any application. U L c U L Atex pending contact factory for details P8063 Integraged Integrated Stainless PCB Face IP66 IP68 Cover Cover Flange Hinge Hinge Latch Locking Latch System System* P8063 P8063C P8063LL P8063CLL P8063LP P8063LPC P8063LPLL P8063LPCLL * Sold separately 36 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

37 8X6X3 IMPACT LINE.14 4mm TYP.33 8mm TYP.82 21mm B mm mm mm A mm mm mm A mm SECTION C-C mm B.31 8mm 6.92 / 176mm 4.80 / 122mm 4.00 / 102mm.31 / 8mm 5.67 / 144mm mm mm mm mm mm mm 7.75 / 197mm mm mm 6.54 / 166mm Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 8x6x3 Impact Back Panels ABP86-IMP - Aluminum panel SBP86-IMP - Steel panel PVCBP86-IMP - PVC panel (For complete accessories, see page 52-54) Aluminum Swing Out System ASWPK86-IMP Aluminum swing panel and SOPK-IMP mounting kit ASWP86-IMP - Aluminum swing panel only SOPK66/86-IMP - 2 Ridget brackets, 1 pivot bracket & 8 self-tapping screws Aluminum Face Plate System FPK86-IMP - Aluminum face plate and SOPK-IMP mounting kit AFP86-IMP - Aluminum face panel only SOPK66/86-IMP - 2 Ridget brackets, 1 pivot bracket & 8 self-tapping screws Air Vents VENT 1 - Aluminum louvered VENT 2 - Outdoor labyrinth Din Rail DIN 6-IMP - 2 rails, 4 screws Steel Swing Out System SSWPK86-IMP Aluminum swing panel and SOPK-IMP mounting kit SSWP86-IMP - Aluminum swing panel only SOPK66/86-IMP - 2 Ridget brackets, 1 pivot bracket & 8 self-tapping screws Pole Mounting Kit PMKG-26-IMP - 2 pole PMKG-36-IMP - 3 pole PMKG-46-IMP - 4 pole PMKG-126-IMP - 12 pole Steel Face Plate System SFPK86-IMP - Aluminum face plate and SOPK-IMP mounting kit SFP86-IMP - Aluminum face panel only SOPK66/86-IMP - 2 Ridget brackets, 1 pivot bracket & 8 self-tapping screws Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details. TF: T: F:

38 9X8X2 IMPACT LINE IMPACT Available in two configurations, either clear or opaque lids with Integra s standard EZ Hinge and Integra s patented Integra latch Standard Color light gray with a high gloss finish. Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate Easy ordering One part number equals one completely assembled enclosure Super easy use mounting flanges integral, so no extra hardware needed Flexible interior Mounting bosses on rear wall provide multiple mounting options for din rail, back panels, or other components Secure Choose your level of protection: pad lockable or tamper tag capable Frequency Friendly Available with absolutely no metals of any kind on the enclosure which is extremely favorable for sending and receiving signals UL-50 / c-ul Listed (file # E207562) Our Impact Line enclosures are the most versatile, feature packed, aesthetically pleasing, Nema UL rated, non-metallic enclosures available. Features like extremely durable, UV resistant, wide temperature range, easy to machine, lighter than other non-metallic or metal materials, the Made in USA Impact Line enclosures provide great value to any application. U L c U L Atex pending, contact factory for details Mechanical and Thermal Test Spec. Unit Impact Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 Flammable / UV Ratings Test Spec. Unit Impact Line Outdoor UV Exposure UL - F1 IP66 IP68 Cover Cover Flange Hinge Hinge Latch Locking Latch System System* P9082 P9082C * Sold separately 38 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

39 9X8X2 IMPACT LINE.82 21mm mm A mm mm mm B B mm mm mm mm A mm 8.92 TOP OF BOSSES 7.92 TOP OF BOSSES mm mm mm SECTION A-A SECTION B-B Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 9x8x2 Impact Back Panels ABP98-IMP - Aluminum panel SBP98-IMP - Steel panel PVCBP98-IMP - PVC panel (For complete accessories, see page 52-54) Din Rail DIN 8-2 rails, 4 screws Mounting Screws SP Pieces self-tapping screws for bosses Air Vents Vent 1 - Aluminum louvered Pole Mounting Kit PMKG-28-IMP - 2 pole PMKG-38-IMP - 3 pole PMKG-48-IMP - 4 pole PMKG-128-IMP - 12 pole Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details and part numbers. TF: T: F:

40 10X8X6 IMPACT LINE ECO FRIENDLY MADE IN THE USA Mechanical and Thermal Test Spec. Unit Impact Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 Flammable / UV Ratings Test Spec. Unit Impact Line Outdoor UV Exposure UL - F1 IMPACT Up to eight standard configurations available with Integra s standard EZ hinge or our new Low Profile hinge and either Integra s patented integrated latch or a stainless steel latch. Standard Color light gray with a high gloss finish Best material bases, opaque covers and clear covers are all made of high-impact, UV resistant polycarbonate Easy ordering One part number equals one completely assembled enclosure Super easy use mounting flanges integral, so no extra hardware needed Flexible interior Mounting bosses on rear wall and lid of opaque enclosure provide multiple mounting options for din rail, back panels, or other components Advanced face plate mounting system Brand new completely unique and easy Advanced swing panel mounting system Brand new completely unique and easy Secure Choose your level of protection: pad lockable, tamper screw or tamper tag capable Frequency Friendly Available with absolutely no metals of any kind on the enclosure which is extremely favorable for sending and receiving wireless signals UL-50 / c-ul Listed (file # E207562) Our Impact Line enclosures are the most versatile, feature packed, aesthetically pleasing, Nema UL rated, non-metallic enclosures available. Features like extremely durable, UV resistant, wide temperature range, easy to machine, lighter than other non-metallic or metal materials, the Made in USA Impact Line enclosures provide great value to any application. U L c U L Atex pending contact factory for details P10086 Integraged Integrated Stainless PCB T-Rail IP66 IP68 Cover Cover Flange Hinge Hinge Latch Locking Latch System System P10086 P10086C P10086LL P10086CLL P10086LP P10086LPC P10086LPLL P10086LPCLL 40 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

41 10X8X6 IMPACT LINE.16 4mm TYP.40 10mm TYP.31 TYP 8mm mm mm B mm 6.25 [158,8] mm mm mm mm mm mm mm mm SECTION A-A mm mm B mm mm mm mm mm 7.80 TOP OF BACKPANEL mm mm mm mm mm mm mm mm SECTION B-B mm.31 TYP [7.9] Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 10x8x6 Impact Back Panels ABP108-IMP - Aluminum panel SBP108-IMP - Steel panel PVCBP108-IMP - PVC panel (For complete accessories, see page 52-54) Aluminum Swing Out Panels ABP-108USP/USOPK - Complete panel kit ABP-108USP - Aluminum swing out panels only USOPK - Hardware only Back Panel Adjustment Kit BPAKG - Gray, Set Screw BPAKB - Black, Set Screw UBPAKG - Gray, Thumb Screw UBPAKB - Black Thumb Screw Air Vents VENT 1 - Aluminum louvered VENT 2 - Outdoor labyrinth Din Rail DIN 8-IMP - 2 rails, 4 screws Steel Swing Out Panels SBP-108USP/USOPK - Complete panel kit SBP-108USP - Steel swing out panels only USOPK - Hardware only Pole Mounting Kit PMKG-28-IMP - 2 pole PMKG-38-IMP - 3 pole PMKG-48-IMP - 4 pole PMKG-128-IMP - 12 pole Mounting Screws SP-8-10 Pieces self-tapping screws for bosses Cord Grips IP68/NEMA 4X/6P rated See page 54 for more details. TF: T: F:

42 GENESIS LINE GENESIS LINE OVERVIEW 900 lb/in Impact Resistance Polycarbonate is known for it s high impact resistance and that is why we chose to use it as the material for our Premium Line Enclosures Wide Operating Temperature Range Polycarbonate is stable and holds it s tensile strength better than other non metallic materials over a temperature range from -40 deg F to 265 deg F. Multi-Max Rail System system provide unlimited mounting potential for your application. These rails mount vertically by attaching to They can be used all around the interior of the enclosure to create three dimensional use of all of the space inside the enclosure. Multi-Max Frame This piece secures just inside the lip of the base molded features to provide un-matched rigidity to the Genesis enclosures. Rigid full piano hinge swing panel The genesis swing panel has an aluminum piano style hing to support the weight of the typical larger enclosure rails and provides rigid smooth operation Panel Pads mounting panel to be set at varying heights inside the enclosure. These pads provide the ability to have multiple mounting panels at different heights. Whether it s a competitive situation or a space restriction more mounting surfaces can save space and money. Multiple Latching Options Three point latch Quarter turn latch Non-metallic latch Call us to discuss your unique requirements. Customization Packaging ensure safe delivery to your location. If you have any special requirements for work to meet your requirements. 42 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

43 GENESIS LINE MULTI-MAX FRAME* MULTIPLE LATCHING OPTIONS FLUSH FLANGE MOUNTING This piece secures just inside the lip of the base rigidity to the enclosure and endless options for mounting. This piece comes pre-installed and is a standard part with every enclosure. Non-metallic latch Three point latch Quarter turn latch The recessed area on the top and bottom of the enclosure provide a smooth and integrated screwed on to the back side of the enclosure and are strong and durable for secure mounting to the enclosure are included. SWING OUT PANEL KITS LOW PROFILE SS HINGE PIN PAD LOCKABLE The Genesis swing panel has an aluminum piano style hinge to support the weight of rigid and repeatable door operation even with components mounted in the door. Choose your level of security when you select standard capabilities for this enclosure MULTI-MAX RAIL SYSTEM * PANEL PADS* MOUNTING FLANGE KITS options rail system provide unlimited mounting potential for your application. These rails mount vertically by attaching to the rear wall They can be used all around the interior of the enclosure to create three dimensional use of all of the space inside the enclosure. or PVC mounting panel to be set at varying heights inside the enclosure. These pads provide the ability to have multiple mounting panels at different heights. Whether it s a competitive situation or a space restriction more mounting surfaces can save space and money. The recessed area on the top and bottom of the enclosure provide a smooth and side of the enclosure and are strong and durable for secure mounting of the to the enclosure are included. * Pending Patents for Multi-Max Rail System and Panel Pads TF: T: F:

44 24X24X10 GENESIS LINE GENESIS POLYCARBONATE ENCLOSURE Integra s larger size, polycarbonate enclosure offering Light gray in color with high gloss finish Featuring Integra s unique Multi-Max Rail Mounting System (an extremely flexible interior mounting system) Sturdy, full length piano hinged door Extra rigid construction utilizing unique internal Multi-Max frame Brass inserts on rear wall of enclosure and on lid for more mounting options Brass inserts for securing mounting flanges to rear of enclosure Available in four non-metallic latch or three point latch configurations UL/C-UL-50 listed (File # E207562) The Integra Genesis series represents the beginning of best medium sized non metallic enclosures available. The unmatched flexibility of the interior of this enclosure combined with off the shelf accessories make the first of the Genesis series enclosures ideal for almost any application. U L c U L Atex pending, contact factory for details ECO FRIENDLY MADE IN THE USA Mechanical and Thermal Test Spec. Unit Genesis Line Instrumented Dart 73 F in/lb. 565 Falling Ball 73 F UL-746 in/lb. 900 ksi 340 Flammable / UV Ratings Test Spec. Unit Genesis Line Outdoor UV Exposure UL - F1 Cover Cover Cover Locking Latch Rail System G G242410C G242410TPL G242410CTPL G242410QTL G242410CQTL G P560* G242410C-P560* G242410P560 - excludes Multi-Max Frame and Multi-Max Rail System G includes the following Enclosure, Multi-Max Frame, Set of Four Multi-Max Rails (with Screws), Two Mounting Flanges (with Screws), and Four Latches Enclosure Multi-Max Frame (pre-installed) Set of Four Multi-Max Rail Stiffners Two Mounting Flanges Four Latches 44 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

45 24X24X10 GENESIS LINE B 4X.28 [ 7,1 ] A A [489] PANEL MOUNT [689,8] [659] [489] PANEL MOUNT [667,3] [641,4] B [706,3] [654,2] 6.00 [152,4] [304,8] [457,2] 8X.31 [ 7,9 ] TOP OF BACKPANEL TOP OF BACKPANEL [292,1] [269,5] INSIDE SECTION A-A SECTION B-B Register online to download this drawing off the Integra website at Your company s logo or other information on the lid. Consult factory for details. Accessories for 24x24x10 Genesis (For complete accessories, see page 52 & 55) Multi-Max Rails GMMR10 KIT - Four multi-max rails with screws included Panel Pads GPP KIT - Includes four panel pads and screws Pole Mounting Kits PMKG pole PMKG pole PMKG pole PMKG pole Polycarbonate Latches GPCL KIT - Polycarbonate latches (4 per pack) Back and Swing Panels ABP Aluminum panel SBP Steel panel PVCBP PVC panel Self-Tapping Screws GSP-10 - Self-tapping screws for bosses (10 per pack) Fan Shroud Kits FSK-1 - One shroud with gasket and screws FSK-2 - Two shrouds with gasket and screws Swing Out Panel System ABP2424 GSOPK - Aluminum swing panel includes ABP24 and GSOPK24 SBP2424 GSOPK - Steel swing panel includes SBP24 and GSOPK24 GSOPK24-24 hinge, panel pads and screws (panel not included) Multi-Max Frame GSR Multi-Max frame support ring TF: T: F:

46 GENESIS SERIES OPTIONS Quarter Turn Latch Three Point Latch Swing Out Panel 46 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

47 INTEGRA ENCLOSURE FAN SHROUD AND FAN SHROUD VENT FILTER KITS KEEPING THE ELEMENTS OUT FAN SHROUD 4 R.54 TYP R.46 R.63 TYP TYP R.75 TYP C X.172 X R.38 TYP R.25 TYP REF.172 REF.5.52 R.13 R REF R.25 6X X.172 VARIED.08 A A 6.87 D R.12 TYP D REF R.19 TYP TYP C SECTION C-C SECTION B-B THK FAN SHROUD VENT FILTER A APPLICATION Our Fan Shroud and Fan Shroud Vent Filter Kits are designed to keep the elements out of your enclosure while allowing the free air movement from INSTALLATION your openings and fans. SPECIFICS Polycarbonate 5.50 A SECTION A-A Include Gaskets On All Three Edges Kits Include All Mounting Hardware & Template PART NUMBERS FS KIT 1 FS KIT 2 (contains 2 shrouds and FSFK-1 FSFK-2 TF: T: F:

48 ENGINEERING PROPERTIES Mechanical and Thermal Test Spec. Unit Integra Polycarbonate PPO ABS Instrumented Dart 73 F in/lb n/a Falling 73 F UL-746 in/lb Deflection 264 psi ASTM D648 Deg. F Modulus of Elasticity ASTM D790 ksi Temperature Range Deg. F -40 to to to 125 Flammable / UV Ratings Test Spec. Unit Impact Line Flame Rating UL UL 94 5VA Outdoor UV Exposure UL F1 Electrical Test Spec. Unit Impact Line Volume Resistivity ASTM D257 ohm-cm 1.00E+17 Dielectric Strength ASTM D149 V/ML 380 in Oil Dielectric Constant ASTM D @60Hz TAKE A CLOSER LOOK AT THE VERSATILITY OF INTEGRA. Integra window kits can create the ideal solution for a wide range of applications. Available on our Premium Line enclosures, they provide a customized viewing area without the need to make holes or cutouts. By applying a vinyl overlay or silkscreen to the exterior or interior, of a clear cover, a window can be created without the need for a hole or cutout, which can reduce the enclosure s protection level. Silkscreen your company s logo on the lid. Consult factory for details. Integrated hinges mean no additional hardware or metal parts, and the door can be easily removed for unimpeded component access. 48 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

49 PREMIUM LINE ACCESSORIES Part Number Description Size MFKG Mounting Feet Kit-Premium Line n/a 1 EA MFKSS Mounting Feet Kit-Stainless Steel n/a 1 EA MFLK6 Mounting Flange Kit 6 n/a 1 EA MFLK8 Mounting Flange Kit 8 n/a 1 EA MFLK10 Mounting Flange Kit 10 n/a 1 EA MFLK12 Mounting Flange Kit 12 n/a 1 EA MFLK14 Mounting Flange Kit 14 n/a 1 EA MFLK16 Mounting Flange Kit 16 n/a 1 EA Aluminum Back Panels (Four Mounting Screws Included) ABP66 Aluminum Panel for 6 x6 Enclosure 4.88 x EA ABP86 Aluminum Panel for 8 x6 Enclosure 6.75 x EA ABP88 Aluminum Panel for 8 x8 Enclosure 6.75 x EA ABP108 Aluminum Panel for 10 x8 X4 or 6 Enclosure 8.75 x EA ABP1082 Aluminum Panel for 10 x8 X2 Enclosure 8.75 x EA ABP1210 Aluminum Panel for 12 x10 Enclosure x EA ABP1412 Aluminum Panel for 14 x12 Enclosure x EA ABP1614 Aluminum Panel for 16 x14 Enclosure x EA ABP1816 Aluminum Panel for 18 x16 Enclosure x EA Steel Back Panels (Four Mounting Screws Included) SBP66 Steel Panel for 6 x6 Enclosure 4.88 x EA SBP86 Steel Panel for 8 x6 Enclosure 6.75 x EA SBP88 Steel Panel for 8 x8 Enclosure 6.75 x EA SBP108 Steel Panel for 10 x8 Enclosure 8.75 x EA SBP1210 Steel Panel for 12 x10 Enclosure x EA SBP1412 Steel Panel for 14 x12 Enclosure x EA SBP1614 Steel Panel for 16 x14 Enclosure x EA SBP1816 Steel Panel for 18 x16 Enclosure x EA PVC Back Panels (Four Mounting Screws Included) PVCBP66 PVC Panel for 6 x6 Enclosure 4.88 x EA PVCBP86 PVC Panel for 8 x6 Enclosure 6.75 x EA PVCBP88 PVC Panel for 8 x8 Enclosure 6.75 x EA PVCBP108 PVC Panel for 10 x8 X4 or 6 Enclosure 8.75 x EA PVCBP1082 PVC Panel for 10 x8 X2 Enclosure 8.75 x EA PVCBP1210 PVC Panel for 12 x10 Enclosure x EA PVCBP1412 PVC Panel for 14 x12 Enclosure x EA PVCBP1614 PVC Panel for 16 x14 Enclosure x EA PVCBP1816 PVC Panel for 18 x16 Enclosure x EA TF: T: F:

50 PREMIUM LINE ACCESSORIES (CONT.) Part Number Description Size Clear Replacement Covers - Includes Gasket, Cover Screws, and Hole Plugs X66CSC-RPL Clear Replacement Screw Cover w/gasket 6 x6 1 EA X66CHC-RPL Clear Replacement Hinge Cover w/gasket 6 x6 1 EA X86CSC-RPL Clear Replacement Screw Cover w/gasket 8 x6 1 EA X86CHC-RPL Clear Replacement Hinge Cover w/gasket 8 x6 1 EA X88CSC-RPL Clear Replacement Screw Cover w/gasket 8 x8 1 EA X88CHC-RPL Clear Replacement Hinge Cover w/gasket 8 x8 1 EA X1008CSC-RPL Clear Replacement Screw Cover w/gasket 10 x8 1 EA X1008CHC-RPL Clear Replacement Hinge Cover w/gasket 10 x8 1 EA X1210CSC-RPL Clear Replacement Screw Cover w/gasket 12 x10 1 EA X1210CHC-RPL Clear Replacement Hinge Cover w/gasket 12 x10 1 EA X1412CSC-RPL Clear Replacement Screw Cover w/gasket 14 x12 1 EA X1412CHC-RPL Clear Replacement Hinge Cover w/gasket 14 x12 1 EA X1614CSC-RPL Clear Replacement Screw Cover w/gasket 16 x14 1 EA X1614CHC-RPL Clear Replacement Hinge Cover w/gasket 16 x14 1 EA X1816CSC-RPL Clear Replacement Screw Cover w/gasket 18 x16 1 EA X1816CHC-RPL Clear Replacement Hinge Cover w/gasket 18 x16 1 EA Premium Line Replacement Covers - Includes Gasket, Screws, and Hole Plugs H66CSO-RPL Replacement Screw Cover w/gasket 6 x6 1 EA H66CHO-RPL Replacement Hinge Cover w/gasket 6 x6 1 EA H86CSO-RPL Replacement Screw Cover w/gasket 8 x6 1 EA H86CHO-RPL Replacement Hinge Cover w/gasket 8 x6 1 EA H88CSO-RPL Replacement Screw Cover w/gasket 8 x8 1 EA H88CHO-RPL Replacement Hinge Cover w/gasket 8 x8 1 EA H1008CSO-RPL Replacement Screw Cover w/gasket 10 x8 1 EA H1008CHO-RPL Replacement Hinge Cover w/gasket 10 x8 1 EA H1210CSO-RPL Replacement Screw Cover w/gasket 12 x10 1 EA H1210CHO-RPL Replacement Hinge Cover w/gasket 12 x10 1 EA H1412CSO-RPL Replacement Screw Cover w/gasket 14 x12 1 EA H1412CHO-RPL Replacement Hinge Cover w/gasket 14 x12 1 EA H1614CSO-RPL Replacement Screw Cover w/gasket 16 x14 1 EA H1614CHO-RPL Replacement Hinge Cover w/gasket 16 x14 1 EA H1816CSO-RPL Replacement Screw Cover w/gasket 18 x16 1 EA H1816CHO-RPL Replacement Hinge Cover w/gasket 18 x16 1 EA 50 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

51 PREMIUM LINE ACCESSORIES (CONT.) Part Number Description Swing Panel Kit Hardware Only Kit inlcudes the two hinge swing arms,four panel mount brackets and hardware needed to assemble the system into any Premium Integra Enclosure. USOPK-B Universal Swing Panel Kit - Black 1 EA USOPK-G Universal Swing Panel Kit - Gray 1 EA Aluminum Subpanels Pre-Drilled For SOPK ABP-66USP Panel for 6x6 Swing Kit 1 EA ABP-86USP Panel for 8x6 Swing Kit 1 EA ABP-88USP Panel for 8x8 Swing Kit 1 EA ABP-108USP Panel for 10x8 Swing Kit 1 EA ABP-1210USP Panel for 12x10 Swing Kit 1 EA ABP-1412USP Panel for 14x12 Swing Kit 1 EA ABP-1614USP Panel for 16x14 Swing Kit 1 EA ABP-1816SP Panel for 18x16 Swing Kit 1 EA Complete Kits Including One Panel and All Hardware Needed to Install Swing Door ABP-66USP/USOPK Swing Panel Kit for 6x6 1 EA ABP-86USP/USOPK Swing Panel Kit for 8x6 1 EA ABP-88USP/USOPK Swing Panel Kit for 8x8 1 EA ABP-108USP/USOPK Swing Panel Kit for 10x8 1 EA ABP-1210USP/USOPK Swing Panel Kit for 12x10 1 EA ABP-1412USP/USOPK Swing Panel Kit for 14x12 1 EA ABP-1614USP/USOPK Swing Panel Kit for 16x14 1 EA ABP-1816USP/USOPK Swing Panel Kit for 18x16 1 EA Miscellaneous Accessories BPAKB Back Panel Adjustment Kit - Black Set Screw 1 EA BPAKG Back Panel Adjustment Kit - Gray Set Screw 1 EA UBPAKB Universal Back Panel Adjustment Kit - Black Thumb Screw 1 EA UBPAKG Universal Back Panel Adjustment Kit - Gray Thumb Screw 1 EA DIN6 DIN Rail Kit 6 (2 rails, 4 screws) 1 EA DIN8 DIN Rail Kit 8 (2 rails, 4 screws) 1 EA DIN10 DIN Rail Kit 10 (2 rails, 4 screws) 1 EA DIN12 DIN Rail Kit 12 (2 rails, 4 screws) 1 EA DIN14 DIN Rail Kit 14 (2 rails, 4 screws) 1 EA DIN16 DIN Rail Kit 16 (2 rails, 4 screws) 1 EA SP-10I Screw Pack (for mounting to bosses, 10) 1 EA SSLL-KIT Stainless Steel Locking Latch Kit 1 EA Cat 60 Lock Cat 60 Lock 1 EA Cat 90 Lock Cat 90 Lock 1 EA Vent 1 3 Aluminum Louvered 1 EA Vent 2 Outdoor Labyrinth 1 EA TF: T: F:

52 POLE MOUNTING KITS Part Number Description Pole Mounting Kits PMKG-26 For 6 Wide Enclosure - 2 Pole 1 EA PMKG-28 For 8 Wide Enclosure - 2 Pole 1 EA PMKG-210 For 10 Wide Enclosure - 2 Pole 1 EA PMKG-212 For 12 Wide Enclosure - 2 Pole 1 EA PMKG-214 For 14 Wide Enclosure - 2 Pole 1 EA PMKG-216 For 16 Wide Enclosure - 2 Pole 1 EA PMKG-224 For 24 Wide Enclosure - 2 Pole 1 EA PMKG-36 For 6 Wide Enclosure - 3 Pole 1 EA PMKG-38 For 8 Wide Enclosure - 3 Pole 1 EA PMKG-310 For 10 Wide Enclosure - 3 Pole 1 EA PMKG-312 For 12 Wide Enclosure - 3 Pole 1 EA PMKG-314 For 14 Wide Enclosure - 3 Pole 1 EA PMKG-316 For 16 Wide Enclosure - 3 Pole 1 EA PMKG-324 For 24 Wide Enclosure - 3 Pole 1 EA PMKG-46 For 6 Wide Enclosure - 4 Pole 1 EA PMKG-48 For 8 Wide Enclosure - 4 Pole 1 EA PMKG-410 For 10 Wide Enclosure - 4 Pole 1 EA PMKG-412 For 12 Wide Enclosure - 4 Pole 1 EA PMKG-414 For 14 Wide Enclosure - 4 Pole 1 EA PMKG-416 For 16 Wide Enclosure - 4 Pole 1 EA PMKG-424 For 24 Wide Enclosure - 4 Pole 1 EA PMKG-128 For 8" Wide Enclosure - 12" pole 1 EA PMKG-1210 For 10" Wide Enclosure - 12" pole 1 EA PMKG-1212 For 12" Wide Enclosure - 12" pole 1 EA PMKG-1214 For 14" Wide Enclosure - 12" pole 1 EA PMKG-1216 For 16 Wide Enclosure - 12 pole 1 EA These kits contain all galvanized steel components and zincplated steel fasteners, designed to securely fasten your Integra enclosure to a metal pole 52 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

53 IMPACT SERIES ACCESSORIES Part Number Description Size DIN6-IMP DIN Rail Kit 6 (2 rails, 4 tapping screws) 1 EA DIN8-IMP DIN Rail Kit 8 (2 rails, 4 tapping screws) 1 EA SP-21-SP-IMP P9082 (C) Switch Plate 1 EA SP-8 Screw Pack (10 pcs) (For Impact line except P9082(C) bosses) 1 EA SP-10I Screw Pack (10 pcs) (For Impact P9082(C) bosses) 1 EA Swing Panel Kit SOPK66/86-IMP 2 Ridget Brackets, 1 Pivot Bracket & 8 Self-Tapping Screws 1 EA ASWPK66-IMP Complete Aluminum Swing Panel Kit, includes SOPK-IMP 6 x6 1 EA ASWPK86-IMP Complete Aluminum Swing Panel Kit, includes SOPK-IMP 8 x6 1 EA ABP-108USP/USOPK Universal Swing Panel Kit for 10x x EA ASWP66-IMP Aluminum Swing Panel for Impact 6 x6 Enclosure 4.88 x EA ASWP86-IMP Aluminum Swing Panel for Impact 8 x6 Enclosure 6.75 x EA Face Plate Kit AFPK66-IMP Complete Face Plate Kit, includes Aluminum Plate and SOPK-IMP 6 x6 1 EA AFPK86-IMP Complete Face Plate Kit, includes Aluminum Plate and SOPK-IMP 8 x6 1 EA AFP66-IMP Aluminum face plate for 6 x6 Enclosure 6 x6 1 EA AFP86-IMP Aluminum face plate for 8 x6 Enclosure 8 x6 1 EA ABP66-IMP Aluminum Back Panel for Impact 6 x6 Enclosure 4.88 x EA ABP86-IMP Aluminum Back Panel for Impact 8 x6 Enclosure 6.75 x EA ABP98-IMP Aluminum Back Panel for Impact 9 x8 Enclosure 6.75 x EA ABP108-IMP Aluminum Back Panel for Impact 10 x8 Enclosure 8.75 x EA SBP66-IMP Steel Back Panel for Impact 6 x6 Enclosure 4.88 x EA SBP86-IMP Steel Back Panel for Impact 8 x6 Enclosure 6.75 x EA SBP98-IMP Steel Back Panel for Impact 9 x8 Enclosure 6.75 x EA SBP108-IMP Steel Back Panel for Impact 10 x8 Enclosure 8.75 x EA PVCBP66-IMP PVC Panel for Impact 6 x6 Enclosure 4.88 x EA PVCBP86-IMP PVC Panel for Impact 8 x6 Enclosure 6.75 x EA PVCBP98-IMP PVC Panel for Impact 9 x8 Enclosure 6.75 x EA Pole Mounting Kits PMKG-26-IMP For 6" Enclosure -2" pole 1 EA PMKG-28-IMP For 8" Enclosure -2" pole 1 EA These kits contain all galvanized steel components and zinc-plated steel fasteners, designed to securely fasten your Integra enclosure to a metal pole PMKG-36-IMP For 6" Enclosure -3" pole 1 EA PMKG-38-IMP For 8" Enclosure -3" pole 1 EA PMKG-46-IMP For 6" Enclosure - 4" pole 1 EA PMKG-48-IMP For 8" Enclosure - 4" pole 1 EA PMKG-128-IMP For 8" Enclosure - 10 to 12" pole 1 EA CAMKG-610-IMP 6" Cross Arm Pole Mount Kit for P EA TF: T: F:

54 IMPACT SERIES ACCESSORIES (CONT.) Part Number Description Replacement Covers include Cover with gasket (Stainless locking latch not included) Features an P66CHO-RPL Standard hinge, integrated latch, opaque 6 x6 1 EA P66CHC-RPL Standard hinge, integrated latch, clear 6 x6 1 EA P66CHOLL-RPL Standard hinge, hasp latch, opaque 6 x6 1 EA P66CHCLL-RPL Standard hinge, hasp latch, clear 6 x6 1 EA P66CLPO-RPL Low profile hinge, integrated latch, opaque 6 x6 1 EA P66CLPC-RPL Low profile hinge, integrated latch, clear 6 x6 1 EA P66CLPOLL-RPL Low profile hinge, hasp latch, opaque 6 x6 1 EA P66CLPCLL-RPL Low profile hinge, hasp latch, clear 6 x6 1 EA P86CHO-RPL Standard hinge, integrated latch, opaque 8 x6 1 EA P86CHC-RPL Standard hinge, integrated latch, clear 8 x6 1 EA P86CHOLL-RPL Standard hinge, hasp latch, opaque 8 x6 1 EA P86CHCLL-RPL Standard hinge, hasp latch, clear 8 x6 1 EA P86CLPO-RPL Low profile hinge, integrated latch, opaque 8 x6 1 EA P86CLPC-RPL Low profile hinge, integrated latch, clear 8 x6 1 EA P86CLPOLL-RPL Low profile hinge, hasp latch, opaque 8 x6 1 EA P86CLPCLL-RPL Low profile hinge, hasp latch, clear 8 x6 1 EA P98CHO-RPL Standard hinge, integrated latch, opaque 9 x8 1 EA P98CHC-RPL Standard hinge, integrated latch, clear 9 x8 1 EA P108CHO-RPL Standard hinge, integrated latch, opaque 10 x8 1 EA P108CHC-RPL Standard hinge, integrated latch, clear 10 x8 1 EA P108CHOLL-RPL Standard hinge, hasp latch, opaque 10 x8 1 EA P108CHCLL-RPL Low profile hinge, integrated latch, clear 10 x8 1 EA P108CLPO-RPL Low profile hinge, integrated latch, opaque 10 x8 1 EA P108CLPC-RPL Low profile hinge, hasp latch, clear 10 x8 1 EA P108CLPOLL-RPL Low profile hinge, hasp latch, opaque 10 x8 1 EA P108CLPCLL-RPL Low profile hinge, hasp latch, clear 10 x8 1 EA Cord Grips Hole Die. CG-LTF7 PC Hub Cord Grip with Lock Nut ( ) EA CG-LTF9 PC Hub Cord Grip with Lock Nut ( ) EA CG-LTF11 PC Hub Cord Grip with Lock Nut ( ) EA CG-LTF13.5 PC Hub Cord Grip with Lock Nut ( ) EA CG-LTF16 PC Hub Cord Grip with Lock Nut ( ) EA CG-LTF21 PC Hub Cord Grip with Lock Nut ( ) EA CG-LTF29 PC Hub Cord Grip with Lock Nut ( ) EA CG-NPT3/8 NPT Cord Grip with Lock Nut ( ) EA CG-NPT1/2 NPT Cord Grip with Lock Nut ( ) EA CG-NPT3/4 NPT Cord Grip with Lock Nut ( ) EA CG-NPT1 NPT Cord Grip with Lock Nut ( ) EA IP68/NEMA 4X/6P Rated Temp Range -30 C to 100 C UL 94 V0 Flame Rated Neoprene Sealing Grommet Polyamide Construction 54 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

55 GENESIS SERIES ACCESSORIES Part Number Description Size Back Panels ABP x21 1 EA SBP2424 Steel back panel/swing panel only for Genesis 24 x24 x10 21 x21 1 EA PVCBP2424 PVC back panel/swing panel only for Genesis 24 x24 x10 21 x21 1 EA Side Panels ASP-2424 Aluminum side panel only for Genesis 24 x24 x x EA SSP-2424 Steel side panel only for Genesis 24 x24 x x EA Swing Panel Accessories ABP2424 GSOPK Aluminum 24 back/swing panel and 24 hinge for swing panel 21 x21 1 EA SBP2424 GSOPK Steel 24 back/swing panel and 24 hinge for swing panel 21 x21 1 EA GSOPK24 24 aluminum hinge for Swing Panel 1 EA Parts & Accessories Multi-Max Frame GMFLK24 Set 24 x24 x10 Mounting Flange Set (set of 2 plus hardware) 1 EA GMFLK Screws Mounting Flange Screws - Set of 10 screws 1 EA GPP Kit Panel Pad kit - (four panel brackets that mount on Mulit-max rail) 1 EA GSR x24 x10 Multi-Max Frame Stiffener Ring 1 EA Multi-Max Rails GMMR10 Kit Multi-Max Rails with screws - 10 depth (set of 4 with screws) 1 EA Fan GMMR Screws Multi Max Rail screws - set of 12 screws 1 EA Shroud GPCL Kit Genesis Non-metallic Latches (set of 4) 1 EA Kits FS KIT-1 Fan Shroud Kit - one pc (includes gsket and screws) 1 EA Fan Shroud FS KIT-2 Fan Shroud Kit - two pcs (includes gasket and screws) 1 EA Vent Filter FSFK-1 Fan Shroud Vent Filter Kit - one pc (includes gasket and screws) 1 EA Kits FSFK-2 Fan Shroud Vent Filter Kit - two pcs (includes gasket and screws) 1 EA Pole Mount Kits PMKG-224 For 24 wide enclosure - 2 pole 1 EA PMKG-324 For 24 wide enclosure - 3 pole 1 EA PMKG-424 For 24 wide enclosure - 4 pole 1 EA PMKG-1224 For 24 wide enclosure pole 1 EA Replacement Covers - Includes Cover and Gasket G2424H-RPL 24 x24 x10 Opaque Replacement Lid 1 EA G2424CH-RPL 24 x24 x10 Clear Replacement Lid 1 EA MADE IN THE USA ABOUT INTEGRA ENCLOSURES Integra manufactures and markets thermoplastic enclosures designed for use in construction, water treatment, utility, telecommunication, instrumentation, remote monitoring, energy and other applications requiring enclosures that are non-corrosive, non-conductive, easy to install/modify and competitively priced. TF: T: F:

56 SWING PANEL AND FACE PLATE ASSEMBLY INTEGRA S EASY AND UNIQUE SWING PANEL & FACE PLATE SYSTEM. EXCLUSIVELY AVAILABLE ON THE IMPACT 6X6X3 AND 8X6X3 ENCLOSURES BENEFITS OF SWING PANEL AND FACE PLATE SYSTEM This system is smart, simple and easy. Minimum number of parts to install One tool needed for complete installation Face plates, swing panels and complete kits in stock Custom panels available (consult factory) A Phillips screw driver is all that is needed to install either system. IMPACT FACE PLATE KIT ASSEMBLY IMPACT SWING PANEL KIT ASSEMBLY This is a great enclosure for any customer. The crystal clear covers facilitates an excellent view of LEDs, digital displays, switches, and other communication devices. Silk screened panels, stickers or other overlays are available from Integra to complete the look of your product. Call us so we can review your application and options. It s as easy as one, two, three... FACE PLATE System 1. Install Four #8 self tapping screws to secure the brackets to the enclosure 2. Install Four #8 self-tapping screws to secure the face plate to brackets 3. You re done MADE IN THE USA SWING PANEL System 1. Install Four #8 self tapping screws to secure the brackets to the enclosure 2. Install Four or Six(your choice) #8 self-tapping screws to secure the swing panel to the brackets 3. You re done ABOUT INTEGRA ENCLOSURES Integra manufactures and markets thermoplastic enclosures designed for use in construction, water treatment, utility, telecommunication, instrumentation, remote monitoring, energy and other applications requiring enclosures that are non-corrosive, non-conductive, easy to install/modify and competitively priced. 56 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

57 FREQUENTLY ASKED QUESTIONS (FAQ S) Q: What is included with a standard Integra enclosure? A: Each enclosure is shipped assembled with the base, cover with the gasket installed with four threaded inserts on the back of the base, four for cover attachment, and four for back panel attachment. Also included is a packet with four mounting feet and four mounting feet screws. Q: Are the enclosures watertight (NEMA 4X)? A: Yes. All Integra enclosures are NEMA 4X. As opposed to many competitors products, Integra enclosures are 4X with latches only or with two screws (in the case of a hinged cover). NEMA 6P enclosures are aldo available. Q: What colors are available? A: Standard color is gloss gray for the Premium Line, Impact Line and Genesis Line. Custom molded color is available. Contact us directly for a quote. Q: Are the enclosures UL-listed? How about Canada? A: Premium Line, Impact Line, and Genesis Line enclosures are listed as UL-50E, Cabinet and Cutout Boxes. Our file number is E Integra is also C-UL Listed for use in Canada and we are Marine Listed for coastal or marine applications. preclude the installation of hubs and components? A: The covers and sidewalls of all Integra enclosures are slightly convex. This was done to ensure that the covers and the base will resist warping, which is a problem that plagues non-metallic flat enclosures. A warped cover or base will not seal properly, and watertightness fails as a result. Another benefit of the shaping is to provide a stronger box. Therefore standard hubs and components can be installed and seated on the surfaces of the enclosure, using standard gaskets. A: Yes, modifications such as machined holes or slots are available. Integra can also provide latch installation, DIN-rail installation, or back panel installation. Contact us for more information and a quote. Also, we do have our CAD drawings downloadable from our website. Use those to define the shape and location of your modifications and that to us at sales@integraenclosures.com. Q: Are back panels available from Integra? A: Yes, we offer back panels in coated steel, bare aluminum and polycarbonate. Q: If I use DIN-rail mounted components, will I need a back panel? A: Probably not. All Integra enclosures feature molded-in mounting bosses on the bottom of the enclosure at intervals of approximately 1 inch, located around the entire perimeter of the enclosure. This allows you to install DIN rails at virtually any location, avoiding the need and expense of a back panel. Q: How does the Integra Back Panel Adjustment System work? A: The Integra Back Panel Adjustment System consists of four mounting pads that slide on T-shaped rails molded into the four corners of the enclosure base. The mounting pads, which are provided with brass threaded inserts for panel attachment, are held in place by inserting a set screw. The set screw, which can be adjusted with the back panel in place, is inserted into a channel in the mounting pad which causes the set screw to engage with the T-rail, providing a positive attachment. The kit includes four mounting pads, eight set screws, an allen wrench, four back panel attachment screws, and an instruction sheet. (PN s BPAKG and BPAKB) TF: T: F:

58 FAQ S (CONT.) A: There are several important advantages: 1. The engineered thermoplastic enclosure has dramatically better impact resistance. For example, the Premium Line enclosure has an impact resistance of over 900 lb/in, while fiberglass typically has an impact resistance of less than 220 lb/in. 2. Thermoplastic enclosures are available with a clear cover. For a fiberglass product, an expensive and potentially leaky window installation is required. 3. Thermoplastic enclosures feature a 100% non-metallic hinge design. Fiberglass products normally feature a steel hinge pin that will eventually corrode. 4. Thermoplastic enclosures tend to offer more features inside the enclosure to support component installation. For example, fiberglass products tend to have only four mounting bosses on the base of the box. Integra products feature those same four mounting bosses, plus molded-in mounting bosses surrounding the perimeter of the enclosure (see the DIN-rail comment above). Integra also offers the patented Back Panel Adjustment System, which eliminates the need for expensive stand-offs or allows the installation of multiple panels. 5. Thermoplastic enclosures are much easier and safer to machine, with none of the dust and splintering associated with fiberglass. 6. Fiberglass enclosures will bloom when exposed to sunlight. In fact, manufacturers of FRP enclosures recommend painting their products. This is not necessary with Integra thermoplastic enclosures. Q: What if I buy an opaque cover enclosure and decide later that I really want a clear cover? A: You can order clear covers, with gaskets installed, and easily replace it in the field. concern? A: Integra provides dual-dimension data for our line of enclosures. Also, note that our DIN rail friendly design speaks directly to the need for European-designed components and the spreading use of DIN rail mounted components. Q: Can Integra enclosure products be mounted underwater or underground? A: Integra s screw-closed configurations, including the hinged versions as well as the non-hinged versions, are now UL-Type 6P rated when the four provided attachment screws are used. Q: How do I clean an Integra enclosure? A: Only light soapy water is recommended to clean your enclosure. Q: What kind of thread locker can be used on Integra enclosures? A: Chemical - Chemical thread locking compounds are not recommended. Anti-seize thread release agents are also not recommended. Mechanical A mechanical thread locking device is acceptable, such as a lock washer, provided a flat washer is used between the locking element and polycarbonate. A: Mounting Feet/Flange in.-lbs. Back Panel in.-lbs. Enclosure Cover in.-lbs. 58 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

59 NEMA / UL-50 TYPE RATINGS An Enclosure is a surrounding case constructed to provide a degree of protection against incidental contact with the enclosed equipment and to provide a degree of protection to the enclosed equipment against specified environmental conditions. Type 1 Intended for indoor use primarily to provide a degree of protection against limited amounts of falling dirt. Type 2 Intended for indoor use primarily to provide a degree of protection against limited amounts of falling water and dirt. Type 3 Intended for outdoor use primarily to provide a degree of protection against rain, sleet, wind blown dust, and damage from external ice formation. Type 3R Intended for outdoor use primarily to provide a degree of protection against rain, sleet, and damage from external ice formation. Type 3S Intended for use primarily to provide a degree of protection against rain, sleet, windblown dust and to provide for operation of external mechanisms when ice laden. Type 4 Intended for indoor or outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, hose-directed water, and damage from external ice formation. Type 4X Intended for indoor or outdoor use primarily to provide a degree of protection against corrosion, windblown dust and rain, splashing water, hose-directed water, and damage from external ice formation. Type 5 Intended for indoor use primarily to provide a degree of protection against settling airborne dust, falling dirt, and dripping non-corrosive liquids. Type 6 Intended for indoor or outdoor use primarily to provide a degree of protection against hose-directed water, and the entry of water during occasional temporary submersion at a limited depth and damage from external ice formation. Type 6P Intended for indoor or outdoor use primarily to provide a degree of protection against hose-directed water, the entry of water during prolonged submersion at a limited depth and damage from external ice formation. Type 12/12K Intended for indoor use primarily to provide a degree of protection against circulating dust, falling dirt, and dripping non-corrosive liquids. Type 13 Intended for indoor use primarily to provide a degree of protection against dust, spraying of water, oil, and noncorrosive coolants. Marine Use For use in or around marine and coastal environments to provide a degree of protection from corrosion, rain, dust, splashing and hose-directed water, and damage from external ice formation. TF: T: F:

60 TECHNICAL INFORMATION Chemical Resistance WARNING!: Variations in chemical behavior during handling due to factors such as temperature, pressure, and concentration can cause equipment to fail, even though it passed an initial test. SERIOUS INJURY MANY RESULT! Use suitable guards and/or personal protection when handling chemicals. The information in this chart has been supplied by reputable sources and is to be used ONLY as a guide in selecting equipment for appropriate compatibility. Before permanent installation test the equipment with the chemicals and under the specific conditions of your application. Ratings of chemical behavior listed in this chart apply to a 48-hr exposed period. There is no knowledge of possible effects beyond this period. This does not warrant (neither express nor implied) that the information in this chart is accurate or complete or that any material is suitable for any purpose. S = Satisfactory and completely unaffected M = Moderate resistance L = Limited resistance/some chemical attack over time U = Unsatisfactory. Severe attack in a short time Chemical Polycarbonate Telcom Polyester Stainless Glass Steel Steel Acetic Acid (10%) S L S U U Acetone U U U S S Aluminum Chloride (10%) S S S S U Aluminum Sulfate (10%) S S S S U Ammonia Gas - - L S S Ammonium Chloride S S L M S Ammonium Hydroxide (10%) U M L S U Ammonium Nitrate (10%) U - L S S Ammonium Phosphate (10%) S S S S U Ammonium sulfate - S S M U ASTM #1 Oil M L - S S ASTM #3 Oil M L - S S Axle Grease M L - S S Boric Acid (10%) S S S S U Calcium Chloride (10%) S M S L L Calcium Hydroxide (10%) S - U M S Carbolic Acid (25%) Phenol U U L M U Carbon Tetrachloride U U S M U Chlorine (water) 5-10 ppm S S - S M Chrome Plating Solution S L - U U Chromic Acid - S S M U Citric Acid (10%) S U S S U Copper Sulfate M U Cutting Fluid (Norton 205) S L - S S Ethyl Alcohol M M M S S Ethylene Glycol S S S S S Ferric Chloride S S S U U Formaldehyde - S S S S Formic Acid S M L S U 60 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

61 Chemical Polycarbonate Telcom Polyester Stainless Glass Steel Steel Fuel Oil (#2) - S U S S Gasoline - U S S S Glycerin - L S S S Hydraulic Brake Fluid U U - S S Hydraulic Oil M U S S S Hydrochloric Acid (10%) S S L U U Hydrofluoric Acid (20%) M L S U U Hydrogen Peroxide L S M M Hydrogen Sulfide S M - L U Isopropyl Alcohol S M - S S Kerosene M U S S S Lacquer Thinner U U - S L Loctite U U U S S Liquid Dish Soap (10%) S - S S S Lubricating Oils - M S S S Magnesium Chloride (10%) S M M S S Magnesium Hydroxide (10%) S M M S S Methyl Ethyl Ketone - U S S S Methylene Chloride U U U S S Mineral Spirits M U S S S Motor Oil (10 weight) S L - S S Nitric Acid (10%) L M M L L Perchlorethylene U U - S S Phosphoric Acid (25%) S M U - - Phosphoric Acid (50%) S M U U U Potassium Carbonate (10%) S S L M L Potassium Chloride (25%) S S S S S Potassium Hydroxide (25%) U S L S S Potassium Nitrate (10%) S S S S S Potassium Sulfate (10%) S S S S S Soap (lgepal) 10% S S S S S Sodium Bicarbonate (10%) S S S S L Sodium Bisulfate (10%) S S - U U Sodium Chloride (25%) S S S M U Sodium Hydroxide U M U M M Sodium Hypochlorite S S L L U Sodium Nitrate (10%) S - S M M Sodium Phosphate (10%) S S L M U Sulfuric Acid (25%) S S U U U Tannic Acid (10%) S S - M L Toluene U U - S S Trichloroethylene - U U M M Trisodium Phosphate - M - M - Turpentine S U S S S Vegetable Oils - S S S S Xylene U U S M M Zinc Chloride M S M U TF: T: F:

62 TERMS AND CONDITIONS OF SALE 1. Orders become effective only when accepted and approved by Integra. Integra s acceptance is expressly made conditional on the Customer s assent to the terms and conditions contained herein and to the terms and conditions of any proposal issued by Integra to the Customer, and Integra agrees to furnish the material covered by the order only upon such terms and conditions. Any of the terms or provisions of the Customer s order which are inconsistent with the terms and provisions contained herein are not agreed to by Integra and shall not be binding on Integra and shall not be considered applicable to the sale or shipment of the materials ordered. 2. There shall be a minimum order amount of $50.00 exclusive of freight. 3. Orders, shipments, and terms of payment are subject to the approval of Integra s Credit Department. Invoices shall be rendered when the materials are shipped. Terms of payment are net 30 days unless otherwise agreed by Integra. Interest may be charged on overdue accounts at the rate of 1.5% per month. Accounts that exceed 60 days may be placed on C.O.D. status at the discretion of Integra. Accounts that exceed 120 days shall be placed for collection. Payments shall be made to Integra Enclosures, P. O. Box 1870, Mentor, Ohio Materials are sold FOB our plant and title shall pass upon delivery to the carrier. Integra is not responsible for any loss or damage incurred in transit and any claim must be made by the Customer. Integra shall assist in the filing of any claim, at the request of the Customer. 5. Shipment dates are given based on current inventories and production plans. However, Integra shall not be responsible for any partial or total failure to deliver or for any delay incurred caused by accidents, delays in transportation, fires, explosions, floods, earthquakes, or other acts of nature, riots, strikes, or other causes beyond Integra s reasonable control. 6. Orders for non-standard materials, such as modified product, are not cancelable and not returnable without Integra s prior consent. Should consent be given, Integra reserves the right to recover all direct costs incurred as a result of the cancellation. 7. Returns of compliant materials may be returned at the customers request only upon the approval of Integra. Materials must be in re-sellable condition and in their original packaging. Returns not accompanied by a new order of greater or equal value shall be subject to a restocking fee of 25 percent of the original sale price. 8. INTEGRA WARRANTS THAT THE MATERIALS SOLD TO THE CUSTOMER ARE FREE FROM DEFECTS IN MA- TERIAL AND WORKMANSHIP AT THE TIME OF SHIPMENT. THE CUSTOMER SHALL NOTIFY INTEGRA IN WRIT- ING WITHIN 30 DAYS OF RECEIPT FOR ANY CLAIMED DEFECTS OR NON-CONFORMING MATERIALS. NO MATERIALS CAN BE RETURNED WITHOUT THE PRIOR CONSENT OF INTEGRA, AND IF APPROVED SHALL BE RETURNED TO INTEGRA FREIGHT PREPAID. INTEGRA S LIABILITY FOR ANY BREACH OF THIS WARRANTY SHALL BE LIMITED TO EITHER REPLACEMENT OF THE MATERIALS OR, AT INTEGRA S SOLE OPTION, THE REFUND OF THE PURCHASE PRICE. INTEGRA SHALL NOT BE HELD LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY BREACH OF THIS WARRANTY. THIS EXCLUSION APPLIES WHETHER SUCH DAMAGES WERE SOUGHT BASED ON BREACH OF WARRANTY, BREACH OF CON- TRACT, NEGLIGENCE, STRICT LIABILITY IN TORT, OR ANY OTHER LEGAL THEORY. FURTHER, INTEGRA SHALL NOT BE LIABLE FOR LOSSES, DELAYS, LABOR COSTS, OR ANY OTHER COST OR EXPENSE DIRECTLY OR INDIRECTLY ARISING FROM THE USE OF MATERIALS. INTEGRA S LIABILITY IS EXPRESSLY LIMITED TO THE REPLACEMENT OR REPAIR OF DEFECTIVE GOODS, OR THE TOTAL VALUE OF SUCH GOODS. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED, OR ORAL INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY IMPLIED WARRANTIES OTHERWISE ARISING FROM A COURSE OF DEALING OR TRADE. 9. Should any clause of this agreement be held unenforceable or unlawful, it is agreed that the clause in question shall be modified so as to eliminate the unenforceable element and as so modified, shall be binding on the parties. The remaining clauses and provisions shall not be affected. 10. Any assistance, suggestions, or technical advice given the Customer by Integra or any agent thereof, concerning dimensions, handling, installation, testing, storage, use or placement in service is an accommodation for which Integra shall have no liability unless expressly provided by Integra in writing and signed by an officer of the company. 11. This agreement is complete and contains the entire contract between the parties, and may not be modified except in writing by both parties. No employee, agent, or representative of Integra has the authority or power to add, waive, or amend this contract unless first authorized in writing by an officer of Integra. This agreement shall be construed under the laws of the State of Ohio. Waiver of Integra of any breach shall not thereafter be deemed a waiver of a subsequent breach of the same of any other provision hereof. 62 INTEGRA ENCLOSURES 7750 TYLER BLVD MENTOR, OH 44060

63 TF: T: F:

64 P O L Y C A R B O N A T E & N O N - M E T A L L I C E N C L O S U R E S CATALOG # TYLER BLVD MENTOR, OH T F