*Discover our other ranges: Select your range of Spacial steel wall-mounting enclosures. Spacial S3DC. Spacial S3X page 5/4. Thalassa PLM page 6/12.

Transcription

1 Spacial SDC Select your range of Spacial steel wall-mounting enclosures SDC You need an efficient, sealed multipurpose and aesthetic enclosure for an indoor industrial facility. Our solution: the Spacial SDC universal offer. A universal enclosure with -point locks and a broad range of accessories to conform to all your applications. NEMA 4, 4X, IP66 water and dust tightness. A complete offer of 0 dimensions from mm ( in) to mm ( in): With plain door, without cable-gland plate Resistance to mechanical impacts: IK10 plain door Compliance with enclosure standard EN and IEC A broad range of accessories to conform to all your applications See the Selection Guide on page /14. You need an efficient sealed enclosure for a specific application such as electronics and electricity distribution. Our solution: the Spacial SDC application offer. Models sized and suited for your applications Discover our SDCD disconnect enclosure on page /2. SDCD You need an efficient sealed enclosure for an industrial facility with EMC constraints. Our solution: the offer for EMC environments. Enclosures suited to different EMC environments. IP55 water and dust tightness See page /8. SHF *Discover our other ranges: Spacial SX page 5/4. Thalassa PLM page 6/12. /6

2 Spacial SDC The steel enclosure developed to help you save time Easy handling Reusable, eco-friendly packaging. No sharp corners. Useful life Quality of the welding and the coating. Component security Water and dust tightness and impact resistance. EMC and ATEX offer. Increased choice Large range of standard sizes. Application offer with special sizes. Easy installation Four 10-mm (0.4 in) shouldered welded studs. Broad range of mounting plates. Wire guides welded to the door on enclosures 400 mm (15.7 in) or higher. Added value to your work Quality and aesthetics. Easy maintenance Removable hinges. 1 lock command on enclosures 600 mm (2.6 in) or higher. /8

3 Spacial SDC Broad range of accessories Mounting Cable installation and management 1 Wall-mounting 5 Installation 2 Floor-standing 6 Cable entries Roof 7 Cable management 4 Viewing and grounding 8 Thermal management /9

4 Spacial SDC Characteristics The Spacial SDC steel enclosure universal offer Enclosure with plain door. Structured finish, epoxy-polyester powder, RAL 705 gray color. See the Selection Guide on page /14. Technical characteristics Enclosure body -point lock enclosure. One action point enclosure. Single-piece body (cross-shaped structure). Gutter-shaped front profile with double fold. Flat rear. 4 (or 6**) M8 25 shouldered backstuds for installing mounting plates and step slides, leaving a space of 10 mm (0.4 in) behind them. M6 16 grounding studs for equipotential connection between the door and the body of the enclosure. Four direct wall-mounting drill holes [ 10 mm (0.4 in)] are sealed with plugs to maintain the degree of protection. Or mount with lugs installed from the outside (lugs ordered separately, see page /20). Enclosure door Welded studs for the ground connection. Wall-mounting enclosure supplied with screwdriver insert lock as standard. Polyurethane door gasket. M6 16 grounding studs for equipotential connection between the door and the body of the enclosure. Easily removable and reversible, with 20-mm (0.8 in) return with double thickness for excellent rigidity, opening to 120, equipped with 2 or invisible hinges*. For heights from 600 mm (2.6 in), three locking points with linkage, with a single control point. Simple reversal of linkage. Maximum load: 50 kg/m 2. Perforated rails on the door, with pre-drilled holes with a diameter of 4.2 mm (0.2 in) in steps of 25 mm (1.0 in): 2 vertical rails from the height of 400 mm (15.7 in), 2 vertical rails and 2 horizontal rails from the width of 800 mm (1.5 in). * From the height of 800 mm (1.5 in). ** Widths of 1000 and 1200 mm (9.4 and 47.2 in). Standards Screwdriver lock (coin protected). Compliance with enclosure standards IEC 62208, UL 508A. Environmental testing to UL 50E. The Spacial SDC wall-mounting enclosures are compliant with the RoHS directive. Certifications For certification table, see page 9/2. Delivered in a reusable cardboard box with assembly instructions enclosed and wallmounting template on the cardboard. *Our certificates can be downloaded from our website. /10

5 Spacial SDC Characteristics Our empty enclosures are marked CE according to the Low-Voltage Directive (LVD). It is the responsibility of the final equipment manufacturer to respect the regulations in force. Technical characteristics Protection degree IP66 for the single-door enclosures and IP55 for the double-door enclosures, according to IEC UL/NEMA rated 4, 4X for the single-door enclosures and 12, 12K, 1 for the double-door enclosures according to UL 50E and NEMA 250. Resistance to external mechanical impacts IK10 for the plain-door enclosures, according to IEC IK08 for the glazed-door enclosures. Mechanical characteristics Attachment of mounting hardware 4 (or 6**) M8 25 shouldered backstuds for installing mounting plates and step slides, leaving a space of 10 mm (0.4 in) behind them. ** 6 studs for widths 1000 and 1200 mm (9.4 and 47.2 in). Personnel protection Ground connection: Spacial SDC steel enclosures are equipped with M6 16 grounding studs welded in the body and the door for equipotential connection. Grounding braid ordered separately (see page 8/100). Closing the enclosure: enclosures of 600 mm (2.6 in) and higher are equipped with three linked locking points, with a single control point, preventing the enclosures from being left ajar. For locks and inserts see page /26. Coating properties Color: RAL 705 gray; finish: structured. Coating thickness: 60 μm. Fire class: M0. Resistance to corrosion: compliance with standard IEC for outdoor installation: 288 h of humid heat and 6 h of salt mist. Note: the Spacial SDC is specially designed for indoor installations. For outdoor installations, it is advisable to install a canopy or contact us. Protection from nuclear contamination (NFT 0901): RAL 705 and AFNOR A550 tests available on request. *For further information, see the technical annexes on page 9/2. /11

6 Spacial SDC Protection EMC protection Standard Spacial SDC enclosures are tested against electromagnetic disruptions. Since the enclosure is tested empty, it is advisable to rerun the tests with the enclosure equipped in its final configuration. Grounding braids ordered separately, see page 8/100. For another EMC solution and additional information on electromagnetic compatibility, see the Spacial SHF enclosure, page /8. Attenuation curve of the Spacial SDC compared with the Spacial SHF 100 Attenuation (db) , Frequency (MHz) Magnetic field Electrical field Frequency: Hz Amplitude: 1 mm/sec below 22 Hz Frequency: Hz Acceleration: 0.7 g above 0 Hz Vibration constraints The Spacial SDC enclosure is constructed as a single-piece body with a crossshaped structure. The rear is flat without added parts, allowing it to comply with specific vibration constraints. The tests were conducted according to the "rules for ships" by "Det Norske Veritas." Enclosures labelled "DNV" have undergone these tests and obtained classification "A." Since the enclosure is tested empty, it is advisable to rerun the tests with the enclosure equipped in its final configuration. ATEX compliance The Spacial SDC enclosure (with adaptation) is certified ATEX by the LCIE. Environmental consideration Compliance with RoHS standard. /12

7 Spacial SDC Dimensions A: Enclosure height B: Enclosure width C: Enclosure depth 1-door enclosure (1) 4 or 6 M8 25 mm (1.0 in) backstuds with widths 1000 to 1200 mm (9.4 to 47.2 in). 2 M mm (0.7 in) grounding studs. () Stud center-to-center distance. (4) Center-to-center distance of the holes for direct mounting. Ø10 A-75 (A-.0) () A-45 (A-1.8) (4) A B-75 (B-.0) () B-45 (B-1.8) (4) (1) C-2 (C-0.9) C B 0 (1.2) (1) 2 (0.9) *The DXF diagrams can be downloaded from our website. C-48 (C-1.9) C-28 (C-1.1) B-42 (B-1.7) D E C F 5 (1.4) 105 (4.1) Detail (1) Detail Perforated rails on plain door Perforated rails on the door: mm (in) Perforated rails on the internal door: mm (in) Enclosure (*): mm (in) Vertical Horizontal Vertical Horizontal Height Width F D E C F D E C 400 (15.7) 00 (11.8) 20 (12.6) 27 (9.) (15.7) 400 (15.7) 20 (12.6) 7 (1.) (19.7) 400 (15.7) 70 (14.6) 7 (1.) (19.7) 500 (19.7) 70 (14.6) 47 (17.2) (2.6) 400 (15.7) 70 (14.6) 7 (1.) (2.6) 600 (2.6) 70 (14.6) 57 (21.1) (27.6) 500 (19.7) 470 (18.5) 47 (17.2) (1.5) 600 (2.6) 570 (22.4) 57 (21.1) (1.5) 800 (1.5) 570 (22.4) 77 (29.0) 620 (24.4) 749 (29.5) (9.4) 600 (2.6) 770 (0.) 57 (21.1) 420 (16.5) 949 (7.4) (9.4) 800 (1.5) 770 (0.) 77 (29.0) 620 (24.4) 949 (7.4) (9.4) 1000 (9.4) 770 (0.) 97 (6.9) 820 (2.) 949 (7.4) 820 (2.) 47 (17.2) 20 (12.6) 949 (7.4) 1200 (47.2) 800 (1.5) 970 (8.2) 77 (29.0) 620 (24.4) 1149 (45.2) (47.2) 1000 (9.4) 970 (8.2) 97 (6.9) 820 (2.) 1149 (45.2) 1020 (40.2) 47 (17.2) 20 (12.6) 1149 (45.2) (*) The doors of enclosures smaller than mm ( in) do not have horizontal cable guides. *Areas without cut-outs, see page / (0.2) (1) (1) Perforations in steps of 25 mm (1.0 in). 1 M mm (0.7 in) grounding stud. /1

8 Spacial SDC Selection guide Dimensions (mm and Inches) H (mm) W (mm) D (mm) H (in) W (in) D (in) Number of doors IP Weight of empty enclosures: kg (lbs) Plain front door Without mounting plate Plain mounting plate painted white Plain mounting plate galvanized (6.2) NSYSDC215 NSYMM2WH NSYMM (7.0) NSYSDC15 NSYMMWH NSYMM (9.0) NSYSDC20 NSYMMWH NSYMM (10.) NSYSDC415 NSYMM4WH NSYMM (10.1) NSYSDC420 NSYMM4WH NSYMM (1.1) NSYSDC4420 NSYMM44WH NSYMM (19.2) NSYSDC5420 NSYMM54WH NSYMM (21.2) NSYSDC5425 NSYMM54WH NSYMM (2.0) NSYSDC5520 NSYMM55WH NSYMM (24.9) NSYSDC5525 NSYMM55WH NSYMM (22.) NSYSDC6420 NSYMM64WH NSYMM (25.2) NSYSDC6425 NSYMM64WH NSYMM (28.9) NSYSDC6620 NSYMM66WH NSYMM (1.1) NSYSDC6625 NSYMM66WH NSYMM (4.4) NSYSDC660 NSYMM66WH NSYMM (1.4) NSYSDC7525 NSYMM75WH NSYMM (44.) NSYSDC8620 NSYMM86WH NSYMM (48.7) NSYSDC8625 NSYMM86WH NSYMM (52.0) NSYSDC860 NSYMM86WH NSYMM (60.8) NSYSDC8640 NSYMM86WH NSYMM (64.9) NSYSDC8825 NSYMM88WH NSYMM (69.) NSYSDC880 NSYMM88WH NSYMM (59.8) NSYSDC10625 NSYMM106WH NSYMM (74.6) NSYSDC10825 NSYMM108WH NSYMM (81.2) NSYSDC1080 NSYMM108WH NSYMM (90.0) NSYSDC10840 NSYMM108WH NSYMM (98.0) NSYSDC10100 NSYMM1010WH NSYMM (96.7) NSYSDC1280 NSYMM128WH NSYMM (105.5) NSYSDC12840 NSYMM128WH NSYMM (11.4) NSYSDC12100 NSYMM1210WH NSYMM1210 Installation accessories Description Set of 4 steel mounting lugs Set of 4 stainless-steel mounting lugs Kit for heavy loads Catalog number NSYAEFPFSC NSYAEFPFXSC NSYAEFAHLBSC Batch of 2 M8 eyebolts NSYAELYTCRG8 See also these accessories Equipment mounting plate Page /18 Accessories for mounting plate Page /18 Cable-management accessories Page /0 /14