CS COMPACT ENCLOSURE. CABINETS. method for lifting uses the same eyebolts as ATB8 cabinets. optional 180 hinges available
|
|
|
- Brianne Wilcox
- 6 years ago
- Views:
Transcription
1 CS COMPACT ENCLOSURE method for lifting uses the same eyebolts as ATB8 cabinets optional 180 hinges available CS enclosures can be wall-mounted using standard SDWC-010 mounting brackets as used on ST Box programme studs welded on the internal sides enable the fixing of both the vertical and horizontal profiles WTPR - CS and fast fixing brackets WTPR - R espagnolette 3-point locking system with multiple insert options door mounting rails fitted as standard provides for both assembly of horizontal mounting rails (WTTO) as well as providing rigidity nylon mounting block fixed on plate allows for easy installation (sliding rails CSPP allow easy installation) newly designed bottom plate provides easy access for cabling base prepared to accept ATZE plinth mounting H=100mm & 200mm from left: - cable entry plates - fast fixing brackets WTPR-R - assembled vertical profiles WTPR-CS 89 CS COMPACT ENCLOSURE
2 CS COMPACT ENCLOSURE WITH SINGLE DOOR - enclosure and door manufactured from 15/10 sheet steel (for enclosure W=800, door manufactured from 20/10 sheet steel) - mounting plate manufactured from 25/10 sheet steel ETA standard epoxy polyester powder coating. Enclosure and door: colour RAL 7035 textured finish. Enclosure supplied with: - 2 sendzimir profiles fixed on the door - mounting plate - espagnolette 3-point locking system with ø 3mm double bar - adjustable cable entry CONFORMITY AND APPROVAL PROTECTION RATINGS - IP 55, according to IEC EN62208; EN NEMA 12 according to UL508A; UL50 - protection degree guaranteed by the two-component polyurethane foam seal (for technical details, refer to page 260) - impact resistance IK10 complying with IEC EN62208; EN MAIN ACCESSORIES ATZE modular plinth (see page 94) eyebolts (see page 95) wall-mounting brackets (see page 95) 90 CS COMPACT ENCLOSURE
3 CS CS61240 CS61430 DIMENSIONAL SPECIFICATIONS CABINET DIMENSIONS B A P FLOOR FIXING CABLE ENTRY DOOR SPACE MOUNT. PLATE DIM. C D E F M N L H CS CS CS CS Note: available on request enclosure with glazed door. For the product code, add the suffix PX. I.E.: CS61240PX. 91 CS COMPACT ENCLOSURE
4 CS COMPACT ENCLOSURE WITH DOUBLE DOOR - enclosure and door manufactured from 15/10 sheet steel - mounting plate manufactured from 25/10 sheet steel ETA standard epoxy polyester powder coating. Enclosure and door: colour RAL 7035 textured finish. Enclosure supplied with: - 2 sendzimir profiles fixed on the door - mounting plate - espagnolette 3-point locking system with ø 3mm double bar - adjustable cable entry CONFORMITY AND APPROVAL PROTECTION RATINGS - IP 55, according to IEC EN62208; EN NEMA 12 according to UL508A; UL50 - protection degree guaranteed by the two-component polyurethane foam seal (for technical details, refer to page 260) - impact resistance IK10 complying with IEC EN62208; EN MAIN ACCESSORIES ATZE modular plinth (see page 94) eyebolts (see page 95) wall-mounting brackets (see page 95) 92 CS COMPACT ENCLOSURE
5 CS CS CS DIMENSIONAL SPECIFICATIONS CABINET DIMENSIONS B A P FLOOR FIXING CABLE ENTRY DOOR SPACE MOUNT. PLATE DIM. C D E F M N L H CS CS CS CS CS COMPACT ENCLOSURE
6 CS COMPACT ENCLOSURE COMPLEMENTARY ACCESSORIES MODULAR PLINTH ATZE Corner pieces manufactured from 25/10 sheet steel, with PVC front covers caps. Front and side crosspieces manufactured from 20/10 press bent sheet steel. ETA standard epoxy polyester powder coating. Colour: RAL 7025 textured finish The modular plinth is made up of - corner pieces: supply includes 4 pieces complete with front covers and mounting hardware - front crosspieces: supply includes 2 pieces - side crosspieces: supply includes 2 pieces. UNIVERSAL CORNER PIECES SIDE CROSSPIECES FOR CS ATZE DESCRIPTION ATZE DESCRIPTION CROSS. LENGTH (mm) ATZE-A100 ATZE-A200 CORNER PIECES FOR PLINTH H=100 CORNER PIECES FOR PLINTH H=200 ATZE-T0300S SIDE CROSS. FOR PLINTH D= ATZE-T0400A SIDE CROSS. FOR PLINTH D= Supply includes 4 pieces with mounting accessories. Supply includes 2 pieces. To order the side crosspieces H=200, add the suffix D to the code. I.E.: ATZE-T0300SD. ATZE UNIVERSAL FRONT CROSSPIECES DESCRIPTION CROSS. LENGTH (mm) Note: for more information, assembly drawings and dimensional features, please check on page 217. ATZE-T0600 FRONT CROSS. FOR PLINTH W= ATZE-T0800 FRONT CROSS. FOR PLINTH W= ATZE-T1000 FRONT CROSS. FOR PLINTH W= ATZE-T1200 FRONT CROSS. FOR PLINTH W= Supply includes 2 pieces. To order the front crosspieces H=200, add the suffix D to the code. I.E.: ATZE-T0600D. 94 CS COMPACT ENCLOSURE COMPLEMENTARY ACCESSORIES
7 KIT INNER DOOR STPO1 The kit inner door STP01 for ST boxes can be mounted on CS compact enclosure. Frame and door manufactured from 15/10 sheet steel. ETA standard epoxy polyester powder coating. Colour: RAL 7035 textured finish. Supply includes: - frame - door - Ø 3mm double bar locking system - mounting accessories PROTECTION RATINGS - external: as compact enclosure - internal: IP 20. STP STP01612 STP01812 FOR COMPACT ENCLOSURE CS61240 CS81240 KIT INNER DOOR ENCLOSURE DIMENSIONS DOOR DIMENSIONS NR. OF B A P L H C LOCK. POINTS EYEBOLTS WTGS 003 Zincpassivated M12 lifting eyebolts. Supply includes nr. 2 pieces with nuts and washers. WALL MOUNTING BRACKETS SDWC-010 Manufactured from 25/10 zincpassivated sheet steel. Supply includes nr. 4 pieces. 95 CS COMPACT ENCLOSURE COMPLEMENTARY ACCESSORIES
8 VERTICAL RAILS WTPR-CS Manufactured from 15/10 sendzimir sheet steel. Supply includes nr. 4 pieces with accessories. VERTICAL RAILS WTPR-... CS WTPR ENCLOSURE HEIGHT WTPR CS WTPR CS FAST FIXING BRACKETS WTPR - R Manufactured from 15/10 sendzimir sheet steel, H=50mm. Supply includes nr. 4 pieces with mounting accessories. FAST FIXING BRACKETS WTPR - R WTPR ENCLOSURE DEPTH WTPR R WTPR R HINGES WTCE To be mounted on standard doors for 180 opening. Manufactured from zinc material. Colour: RAL 7025 textured finish. Supply includes nr. 3 hinges with mounting hardware 96 CS COMPACT ENCLOSURE COMPLEMENTARY ACCESSORIES
9 SLIDING RAILS CSPP They allow easy installation of the mounting plate. Rails can be removed after installation and kept for future use. Manufactured from 20/10 sendzimir zinc sheet steel. Supply includes nr. 2 pieces with mounting accessories. CSPP CSPP CSPP SLIDING RAILS CSPP ENCLOSURE DEPTH ETA_CS_Compact_Enclosure_en_0911.pdf Helsinki tel automation@klinkmann.fi St. Petersburg tel klinkmann@klinkmann.spb.ru Moscow tel moscow@klinkmann.spb.ru Yekaterinburg tel yekaterinburg@klinkmann.spb.ru Samara tel samara@klinkmann.spb.ru Кiev tel klinkmann@klinkmann.kiev.ua Riga tel klinkmann@klinkmann.lv Vilnius tel post@klinkmann.lt Tallinn tel klinkmann.est@klinkmann.ee Мinsk tel minsk@klinkmann.com
ATB8 MONOBLOC CABINET
ATB8 MONOBLOC CABINET finishing profile frame, roof and sidewall are one integral piece removable back mounting plate included in the supply closing system with: 3 points for H=1600, 4 points for H=1800-2000,
BOXES SOLUTIONS. BOXES
BOXES SOLUTIONS - wide range of dimensions: over 40 enclosures with blank door, 19 models with glazed door, enclosures with single blank door, double door with rod system and enclosure with single glazed
ETA quality, promptly
ETA quality, promptly E MOX - THE PRODUCT PHILOSOPHY E MOX is E.T.A. quality, promptly E.T.A. introduces E MOX, the new range of monobloc enclosure solutions proposed as the effective combination of strength
SINGLE DOOR BOXES. PAINT FINISH ETA standard epoxy polyester powder coating. Enclosure and door: colour RAL 7035 textured finish.
ST SINGLE DOOR BOXES Enclosure and door manufactured from 1.5 mm thick sheet steel. Mounting plate manufactured from 2.5 mm thick sendzimir sheet steel. Enclosure and door: colour RAL 7035 textured finish.
BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES
BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES ST WALL-MOUNTING BOXES WITH BLANK DOOR STP WALL-MOUNTING BOXES WITH PLEXI DOOR ST/STP COMPLEMENTARY ACCESSORIES SDV TERMINAL BOXES WITH SCREWED COVER SDF TERMINAL
cabinets and equipment Atlantic, Atlantic stainless steel, Marina
cabinets and equipment Atlantic, Atlantic stainless steel, Marina EXTERNAL DIMENSIONS D ATLANTIC CABINETS (p. 276) MARINA CABINETS (p. 286) METAL IK 10 STAINLESS STEEL IP 66-IK 10 POLYESTER - IP 66 - IK
ECO/PCI Compact Enclosures Product Drawings Last Updated 6/19/2008
ROSE+BOPLA ENCLOSURES A PHOENIX MECANO COMPANY ECO/PCI Compact Enclosures Product Drawings Last Updated 6/19/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 www.rose-bopla.com rbinfo@pm-usa.com
MONOBLOC CONTROL DESKS
MONOBLOC CONTROL DESKS Enclosure manufactured from 1.5 mm thick press bent sheet steel provided with front door manufactured from 1.5 mm thick sheet steel with lateral stiffening cover, and upper panel
Polymas Watertight PK Enclosures Product Drawings Last Updated 6/18/2008
A PHOENIX MECANO COMPANY PK Enclosures Product Drawings Last Updated 6/18/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 www.rose-bopla.com rbinfo@pm-usa.com Dimensional Drawings For
Fiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006
ROSE+BOPLA ENCLOSURES A PHOENIX MECANO COMPANY Fiberglass Watertight Modular Flange Product Drawings Last Updated 1/6/2006 Dimensional Drawings All sizes are available with an optional clear viewing lid.
MODULAR CONTROL DESKS
MODULAR CONTROL DESKS BOX AE W=600/800 W=1200/1600 Structure manufactured from 1.5 mm thick press bent sheet steel and door manufactured from 1.5 mm thick sheet steel with lateral stiffening cover and
Bulletin 140U R-Frame Molded Case Circuit Breakers
R-Frame Molded Case Circuit Breakers Selection Guide Product Selection Product Selection 2500 A, R-Frame UL 489 Note: Terminal box lugs must be ordered separately. CSA 22.2, No. 5 IEC 60947-2 CE KEMA-KEUR
PLIO -GRAINS cable ties
PLIO -GRAINS cable ties PA & PE black & PLIO -GRAINS PLIO-GRAINS - PA cable ties in polyamide black for outdoor use and for indoor use -20 to +85 C maximum tensile length bundle Ø strength type number
STX stainless steel boxes
STX stainless steel boxes Enclosure and door manufactured from AISI 304 stainless steel (AISI 316 on request). Mounting plate manufactured from 2.5mm sendzimir sheet steel. Hinge in stainless steel. Box
SWITCH DISCONNECTORS PLANET -SWITCH.
SWITCH DISCONNECTORS 6A to 600A ratings Versions: direct operating handle, door coupling and in housing Wide range of accessories Types for photovoltaic applications up to 50A. PLANET -SWITCH SEC. PAGE
Approvals (p. 906) 0 371 61 0 371 63 0 371 64 0 371 66 0 371 69 0 371 68 0 371 00 0 371 08 0 371 20 Connecting (p. 300) 1 connection - 1 entry/1 outlet ELECTRICAL FUNCTION TERMINAL BLOCKS INSULATION EQUIPOTENTIAL
Switch disconnectors and fuse switch disconnectors
Switch disconnectors and fuse switch disconnectors Technology QUADRON CrossLinkBreaker Secures and disconnects currents up to 100A Sizes 000 to 2 can be mounted quickly on DIN EN 50 022 rails using the
Panel-mounting components
Quality Panel-mounting components For conventional cabling, Wöhner offers a comprehensive range of panel components suitable for either plate or DIN-rail mounting. Fuses and the associated connection technology
Heavy Duty. this page Page 4-16 Page 4-19 Page Mounting Clamp. 8 ArmorBlock MaXum. 9 Standard Cordsets. 10 DeviceNet Photoelectric
Bulletin 45, 55 Product Line Overview NetTM Media Bulletin 45 Type Product Selection NetTM Flat Media System KwikLinkTM General Purpose NetTM Flat Media System KwikLinkTM Heavy Duty 6 / 20 NetTM Round
Areta multiple doors AVAILABLE FULLY ASSEMBLED AND FLAT-PACK.
Areta multiple doors A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure. Specific mounting kit allow the fitting out of: - front with door modules complete
Bulletin 194L 194E 194E
Bulletin 19C, 19L, 19E Product Line Overview Switch Selection / 211 Type Features ctuators Bulletin 19L 19E 19E Open Switch or Enclosed UL/CS El. Ratings Rated Voltage U e [V C] Control and Load Switches,
Get detailed information on many digital or printed supports, or contact your Area Commercial Manager
The RX 3 and DX-E ranges provide essential functions for the protection requirements of people and property in residential and small commercial buildings Two breaking capacities, 4500 and 6000 (IEC 60898-1)
Din rail power supplies
www.klinkmann.com Din rail power supplies Short form 2011-2012 EDITION A wide range of power supplies All the power you need in your hand The current production of Cabur DIN RAIL power supplies is the
7E x0. Nominal current 5 A (32 A Maximum) 1-phase 230 V AC 17.5 mm wide
Features 7E.23.8.230.00x0 kwh Energy meter 1-phase with multi-functional LC-Display Type 7E.23 5(32) - 1 module wide Complies with EN 62053-21 and EN 50470 Display indicates total consumption, partial
DC Loop Contactors, Contactor Lugs and Dynamic Brakes Technical Data
DC Loop Contactors, Contactor Lugs and Dynamic Brakes Technical Data Table of Contents 1370 DC Loop Contactors....................................3 Catalog Number Explanation...............................3
Proximity Sensors and Limit Switches
Proximity Sensors and Limit Switches Time-tested, Robust and Reliable Control 6 / 2011 INDUCTIVE SENSOR PRODUCT SPOTLIGHT Allen-Bradley proximity sensors set the standard for ruggedness, reliability and
Size for Size Best Value in the Industry
Size for Size Best Value in the Industry Overview for SMC -Flex and SMC -3 Soft ers 3...480A 200-460VAC...500-575VAC www.klinkmann.com Allen-Bradley Smart Motor Controllers... Providing Unmatched Intelligent
C13 Various Cable Ties C
C13 Various Cable Ties PLIO -GRAINS cable ties PLIO -GRAINS S H PLIO-GRAINS Material: PA (polyamide 6) PP (polypropylene) Colours: natural - black natural Operating temperatures: -20 to +85 C -20 to +75
RESIDENTIAL BUILDINGS & HOTEL EQUIPMENT
RESIDENTIAL BUILDINGS & HOTEL EQUIPMENT Plexo flush-mounting complete IP 55 Plexo surface-mounting complete IP 55 Plexo mechanisms IP 55 for flush or surface-mounting Plexo surface-mounting boxes and support
Starfix TM ferrules and crimping tools
Starfix ferrules and crimping tool 3 wire marking Nylbloc auto screwless mounting connectors Nylbloc screw terminal strips Starfix TM ferrules and crimping tools 376 50 376 66 376 77 377 64 376 87 376
(p. 47) (p. 155) (p. 155)
0 286 56 + 0 288 02 (p. 47) 0 286 74 + 0 288 02 (p. 155) 0 287 56 + 0 288 02 (p. 155) Dimensions see e-catalogue Elecical characteristics p. 162 Automatic air circuit breakers must be equipped with eleconic
MCBs and RCDs LR TM 6000
MCBs and RCDs LR TM 6000 thermal magnetic MCBs from 6 A to 63 A B and C curves residual current devices from 25 A to 63 A AC and A types ± ± ± ± MCBs Single pole 230/400 V± Single pole neutral 230 V± (1)
600 SWINGING FRAME ATTR characteristics. CE-TEK standard epoxy polyester powder coating. Colour: RAL 7032 textured finish.
1 of 9 RACK 19 19 swinging frames 600 SWINGING FRAME Frame manufactured from pressbent rails in 1.5mm sheet steel and 2mm box-shaped horizontal profiles that give high strength. Colour: RAL 7032 textured
MODULAR CABINET WITH EXTERNAL DOORS
MODULR CBINET WITH EXTERNL DOORS / The solution is composed by: E NUX structure and bottom with adjustable cable entry manufactured from high-strength low-alloy sheet steel roof manufactured from sheet
Baying systems TS 8. Height: 1200 mm/1400 mm, depth: 500 mm
Baying systems TS 8 System accessories Page 537 TS 8 corner enclosures Page 583 TS 8 stainless steel Page 194 TS 8 EMC-shielded Page 200 Material: Enclosure frame, roof, rear panel and gland plates: Sheet
E NUX RACK 19 AND NETWORKING SOLUTIONS FEATURES AND BENEFITS
E NUX RACK 19 AND NETWORKING SOLUTIONS FEATURES AND BENEFITS In full respect of the sustainability and compatibility philosophy, the system of suite cabinets E NUX can be integrated with a range of specific
Limit, micro and foot switches K series
imit, micro and foot switches K series Prewired limit switches limit switches with high degree of protection, IP67. 2m long wire Axial rotation of operating heads Adjustable and capsizable levers Fixing
Empower the World with Photovoltaics
www.klinkmann.com Empower the World with Photovoltaics Solutions for photovoltaic power supply - for professional and for housing applications. Schematic Diagram of the Smart Off-Grid Systems (for applications
*Discover our other ranges: Select your range of Spacial steel wall-mounting enclosures. Spacial S3DC. Spacial S3X page 5/4. Thalassa PLM page 6/12.
Spacial SDC Select your range of Spacial steel wall-mounting enclosures SDC You need an efficient, sealed multipurpose and aesthetic enclosure for an indoor industrial facility. Our solution: the Spacial
PLUS EXTREME PROTECTION FOR HARSH ENVIRONMENTS SOLUTIONS FOR EXTREME APPLICATIONS STAINLESS STEEL SOLUTIONS
SOUTIONS FOR EXTREME APPICATIONS STAINESS STEE SOUTIONS For indoor and outdoor applications, where the main requirement is to offer a high resistance to harsh chemical and environmental factors, we propose
Gland Plate 1.4mm mild steel. -Opening: Situated at the far rear of the enclosure to make cabling onto the mounting plate easier.
14 SM SHEET STEEL ENCLOSURES ITH MOUNTING PLATE FOR ALL MOUNTING SM Delivery contents: Complete enclosure with mounting plate and fixing material, Blank flange with gasket and screws. Nylon washers for
RACK 19 AND NETWORKING SOLUTIONS FEATURES
RACK 19 AND NETWORKING SOLUTIONS FEATURES In full respect of the sustainability and compatibility philosophy, the system of suite cabinets E NUX can be integrated with a range of specific accessories for
Time-Tested Durability, Industry Proven A Legacy of Leadership mm 800T/H. 6 /
Time-Tested Durability, Industry Proven A Legacy of Leadership 30.5 mm 800T/H 6 / 2011 IMITATED, BUT NEVER DUPLICATED The Allen-Bradley Bulletin 800T and 800H push button product lines are in a class by
Wall-mounting steel enclosures suitable for any CRN and CRNG application
Wall-mounting steel enclosures suitable for any CRN and CRNG application 1 2 3 4 5 6 1 Front rain gutter prevents the entry of water, oil or liquids, ensuring IP66 protection. 10 9 8 7 1/18 2 A complete
Number of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures
us enclosures G. us enclosures Enclosure:.38 Door:.5 IP 65 to EN 60 59/09.00, complies with NEMA. Door with l/h hinge, cam lock with double-bit insert, () support rail(s) S 35/7.5 (for G 586.). Drilled
Product Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
The range is fully compatible with the PS system accessories.
The ES 5000 exclusive enclosure the compact enclosure system with multiple benefits Compact for electronics, ideal for machine control, generously proportioned for climate control, flexible and cost-effective
MODULAR CABINET WITH MULTIPLE DOORS FEATURES
MODULAR CABINET WITH MULTIPLE DOORS FEATURES 1 Assembly achievable on the basis of the customer s specification, through the use of ETA standard components and accessories. 2 Standard ETA roof, bottom,
When to use a Soft Starter or an AC Variable Frequency Drive
White Paper When to use a or an AC Variable Frequency Product lines: Smart Motor Controllers (SMCs), AC Variable Frequency s (VFDs) Topic Page Introduction 2 Starting Methods 3 How does a VFD work? 7 Comparisons
Harshenvironments. Solutions manufacturedfrom mildsteelor aluminium alloy Single or double wall
MKTG 2016 Harshenvironments OUTDOOR Solutions manufacturedfrom mildsteelor aluminium alloy Single or double wall STAINLESS STEEL Modular cabinets Monobloc and compact enclosures Wall-mountingboxes Terminal
Premium Quality - Value Price
ACE 19" RACK SYSTEMS 1 VS 7000, Super Efficient Global IT Rack Designed ready to install and meeting international standard and of Top-quality. Two 19" mounting multi-functional profiles create a solid
Outdoor system solutions
Outdoor system solutions At home in any outdoor application 2 Rittal Outdoor system solutions Energy Mounting benefits Flexible basic enclosure, optionally with doors front and rear, for rapid interior
GENERAL CATALOGUE. Release 21
GENERAL CATALOGUE Release 21 GENERAL INDEX SUITE CABINETS E NUX MONOBLOC CABINETS E MOX INDUSTRIAL AUTOMATION COMPACT SOLUTIONS E COMP MODULAR SOLUTIONS E NUX PC CABINETS E NUX WE ARE ETA PRODUCTS TECHNICAL
Floor Standing Enclosures
& Floor Standing Enclosures Industrial Automation Power istribution 5 Modular Type Modular Type Görsel 6 Görsel 8 Monoblock Type Monoblock Type Görsel 7 Görsel 9 6 7 FRAME STRUCTURE EARTING CONTINUITY
Spacial 3D steel enclosure 19"
19" The Spacial 3D 19" enclosure offer, for electronics and networks, comprises 2 ranges: - 1-body enclosures, depth 400 mm, with fi xed or swing rack. - 2-body enclosures, depths 400 and 500 mm. Technical
OUR VISION STAINLESS STEEL MILD STEEL MODULAR FLOOR STANDING NON METALLIC P F BLACKBURN SOUTH VIC 3130
Excalibur REAZ AUSTRALIA Enclosures PTY LTD 59 P.O. Northville BOX 2340 Drive Barnsley NSW 2278 BLACKBURN SOUTH VIC 3130 T - 03 9878 4141 sales@reaz.com.au EX-EC/S General Purpose Wall Mount Enclosures
ACCESSORIES FOR SZE2 CABINETS
ZPAS 143 DOORS Doors Intended for use instead of front solid door or rear panel. Maximum door opening angle: 120 Sheet steel textured powder paint, light grey (RAL 7035), stiffened profiles, brown smoked
FAMIGLIA PRODOTTO INNOVATIONS 016 TIPOLOGIA / DESCRIZIONE FAMIGLIA
FAMIGLIA PRODOTTO INNOVATIONS 016 TIPOLOGIA / DESCRIZIONE FAMIGLIA 1 INDEX RACK SOLUTIONS INNOVATIONS 2016 THERMAL MANAGEMENT UPGRADE: MARKET REQUESTS RACK Rack E NUX RACK 19 AND NETWORKING SOLUTIONS
CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate
CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate wa_vt08914 Available in 45 sizes... from 250x200x150 mm to 1200x1200x250 mm image01-ci The stable CS enclosures series made of solid sheet steel
EB SERIES INSTRUMENT ENCLOSURES
EB SERIES INSTRUMENT ENCLOSURES EB Series Instrument Enclosures 1 5 2 7 4 6 Multiple-fold 1 gutter type edge provides extra stability and protects against dirt and water when enclosure is opened. Grounding
Knürr DoubleProRack. 19 Stand-Alone Enclosure
Knürr DoubleProRack Knürr DoubleProRack 19 Stand-Alone Enclosure 1.92 to 1.98 1.91 19 Network Stand- Alone Enclosure Strong points Strong points 1.92 19 Stand-Alone Enclosure 1.94 19 Enclosure Without
Product Overview. Release 11.EN
Product Overview Release 11.EN The values of a cohesive group BECAUSE WE BELIEVE IN WHAT WE CREATE TOGETHER EVERY DAY Founded in 1978, in Italy, with 40 years of experience in steel, stainless steel and
C-Box Screw Cover with Knockouts NEMA 1. Commercial Enclosures Junction Boxes
C-Box Screw Cover with Knockouts Application Designed for general purpose indoor commercial use as a junction, pull or switch box. Standards UL-50 Type 1 cul Type 1 Complies with: NEMA Type 1 IEC 60529,
Outdoor system solutions
Outdoor system solutions 2 The whole is more than the sum of its parts The same is true of Rittal The System. With this in mind, we have bundled our innovative enclosure, power distribution, climate control
CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate
www.bcp-group.co.id CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate Product Information CS Wall-mounted Sheet Steel Enclosures with Mounting Plate Accessories PT. Berkah Cipta Persada Kota Deltamas
Wall Mounted Enclosures Steel Range Stainless Steel Single door ASR
Wall Mounted Enclosures Steel Range Stainless Steel Single door ASR IP 66 TYPE 4X, 12, 13 IK 10 252 Product Catalogue 02 Wall Mounted Enclosures Material: AISI 304 / AISI 316L pre-grained stainless steel.
EASYBOX Series. Weather-proof enclosures
EASYBOX Series Weatherproof enclosures EASYBOX Series WEATHERPROOF ENCLOSURES IP65 REFERENCE STANDARDS INTERNATIONAL STANDARD IEC 60670 (989) plus Modification (994) Enclosures for accessories for fixed
UCP polyester. UDP polyester. UCP Accessories. UDP Accessories. General Accessories. Mounting plates. Wall mounting brackets. Locks.
160 POLYESTER ENCLOSURES UCP polyester 164 IP66; NEMA 4, 4X, 12, 13 IK10, IK07 H: 315-1035 W: 215-835 D: 170-300 UDP polyester 170 IP 65, 55; NEMA 4, 4X, 12, 13; IK 10, IK 07 H: 500-1250 W: 500-1250 D:
MCS mild steel, single door. MCD mild steel, double door ELDON CS IP 56; NEMA 4, 12, 13; IK 10 IP 55; NEMA 12, 13, IK 10
FLOOR STANDING enclosures 29 Floor Standing Enclosures MCS mild steel, single door MCD mild steel, double door IP 56; NEMA 4, 12, 13; IK 10 H: 1800-2200 W: 400-1000 D: 400-800 IP 55; NEMA 12, 13, IK 10
Approvals, see page 41. Detailed drawing, see page 1226/1227.
Ex enclosures Stainless steel F G B.7 With screw-fastened lid Material: Stainless steel.40 (AISI 04) Surface finish: Brushed, grain 40 Protection category: IP 66 to EN 60 9/09.00 Supply includes: Enclosure,
Compact metal enclosures
Spacial SM Compact metal enclosures Overview Convenience Robustness Comfort Practicality Protection Robustness: Body made as a single piece with welded rear panel. Front part forming a rigid frame with
Spacial SF for Prisma Plus P system
The Spacial SF range includes specific enclosure models for installing the Prisma Plus P : functional units and vertical and horizontal busbars The panels are subject to type tests according to standard
Knürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
GENERAL CHARACTERISTICS
OUTDOOR CASES GENERAL CHARACTERISTICS The ATOS case in the OUTDOOR range is designed specifically to withstand the most severe environmental requirements. The case provides full protection against very
MILD STEEL WALL MOUNTING ENCLOSURES
MILD STEEL WALL MOUNTING ENCLOSURES WALL L MOUNTI IN NG WALL L MR5 M5 MO R 5 MAS IP66/NEMA 4, 12, 13 Single door Height: 200-1200 Width: 200-800 Depth: 155-400 ALL MILD STEEL WALL MOUNTING ENCLOSURES MR
DIGITUS Network- and Server Cabinet Dynamic Basic Series
15 Year Product Warranty 600 kg loading capacity Modular aluminum frame construction large range of equipment available Abstract DIGITUS 600, 800 mm width 600, 800, 1000 mm depth Features IP20 rating Steel
Prisma Plus G enclosures IP30, IP31, IP43 enclosures
Prisma Plus G IP30, IP31, IP43 Prisma Plus G IP30, IP31, IP43 Presentation For safe and upgradeable electrical switchboards > Safety of people and property > Continuity of service > Optimization and upgradeability
Rittal CM Compact System Enclosures
Rittal CM Compact System Enclosures Compact class = Top class: Infinite possibilities R Compact enclosure on the outside, Top enclosure on the inside! Index Convincing details... 3 5 Compact system enclosures
Product Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
Blind and Polycarbonate Cases FQ Series: stainless steel cases with single door
Series Smart 22 Series Smart Blind and Polycarbonate Cases FQ Series: stainless steel cases with single door The Smart series is the proposal for boxes with and witout inner door for small and medium sized
Wall-Mount Enclosures CONCEPT Wall-Mount Enclosures
Spec-00286 H763.422.2211 763.422.2600 Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures, Type 4 and 12 INDUSTRY STANDARDS Wall-mounting brackets required to maintain
OVERVIEW 4 ABACUS ESSE 16 CABINET CABLING RANGE 18 CABINET SERVER RANGE 22 BOX 28
I N D E X OVERVIEW 4 ABACUS ESSE 16 CABINET CABLING RANGE 18 CABINET SERVER RANGE 22 BOX 28 ABACUS ESSE / PRO MECHANICAL ACCESSORIES 29 ABACUS ESSE / PRO VENTILATION 39 ABACUS ESSE / PRO ELECTRICAL ACCESSORIES
Human Machine Interface Console Range Modular MPC
Console Range Modular MPC IP 66 TYPE, 12, 13 IK 10 (single door); IP 55 TYPE 12, 13 IK 10 (double door) 36 Product Catalogue 0 Material: ody and door: 1.5 mm mild steel. Rear panel: 1.5 mm mild steel.
133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST
133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s are designed for control and instrumentation applications. They are a general-purpose enclosure intended for indoor use
Operator Enclosures. Console Type 12 - AW-14 Data Sheet
Console Data Sheet Construction Console body, panel cover and door, top assembly and writing desk are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Panel cover is secured
stainless steel Cover hinge The cover hinge is simply screwed to the box protection channel and to the edge fold. Model No. KL
aus HB, S. 46 The Rittal range of terminal boxes offers 44 practical designs, developed and improved in constant dialogue with users. Whether with or without gland plates, in stainless steel, EMC version
Terminal blocks. J - Accessories. Summary. 1. Mounting rails End stops Circuit separators, seperator end sections...
160T001 Terminal blocks - Accessories Summary 1. Mounting rails... 442 2. End stops... 444 3. Circuit separators, seperator end sections... 447 4. umper bars Screw clamp jumper bars... 449 Screwless jumper
Rittal console systems...
Rittal console systems...... multi-variable Universal console Optionally with short or tall door. Short door offers free field for mounting desk section (see photograph) or keyboard drawer. High level
XL³ 400 metal distribution cabinets, free-standing enclosures and cable compartments
87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL³ 400 metal distribution cabinets, free-standing Cat. No(s) : 20103/04/05/06/07/08/18/19/23/ CONTENTS PAGE 1. General characteristics...
Application Guide EH1, EH2, EH3, EH6. PolySafe. Mersen Canada Toronto Inc.
PolySafe Application Guide EH1, EH2, EH3, EH6 Multipurpose polyester cabinets Range of fourteen multipurpose, factory assembled cabinets in one depth 320mm, for in- and outdoor stationary use. Applications
Product Catalog. Industrial Enclosures
Product Catalog Industrial Enclosures WE ARE CONTEG Since 1998, Conteg has been moving step by step toward the top of the market. We re a leader in supplying complete solutions for data centers, along
SR1 multipurpose enclosures Enclosures for automation and distribution applications
AU TO M AT I O N B OA R D S SR1 multipurpose enclosures Enclosures for automation and distribution applications Complete range of monobloc enclosures for small and mediumsize automation, command and distribution
Thorne and Derrick UK
PO OL LY POLYESTER ENCLOSURES YE ES ST TE ER POLYESTER ENCLOSURES PO OL LY YE ES ST TE ER UCP IP66/NEMA 4, 4X, 12, 13 Compact version H: 315-1035 W: 215-835 D: 170-300 188 UDP IP65/IP 55 NEMA 4, 4X, 12,
Compact enclosures AE
Compact enclosures AE Material: 1.4301 (AISI 304) Mounting plate: Sheet steel Cam lock: Die-cast zinc, nickel-plated Surface finish: Brushed, grain 40 Mounting plate: Zinc-plated Protection category: IP
Linkeo 19 freestanding cabinets Flat-pack solutions
Page 1.Generalcharacteristics...1 2.Range...2 3. Technical characteristics.................3 4.Packaging...4 5.Dimensions...4 6.Baying...8 7.Plinths...9 8.Cablemanagement...9 9.Fankits... 11 10.PDUsupports...
ENCLOSURE SYSTEMS INDIA
ENCLOSURE SYSTEMS INDIA 2013-2014 In line with our policy of continuous development, we reserve the right to update our designs at any time. As a result, the product shown may not be identical to the one
NexT Range Large sheet steel enclosures
Large sheet steel enclosures 8 Large sheet steel enclosures The NexT Range is the optimum choice for particularly harsh environments. The stainless steel design of the NexT Range can face up to the toughest
180VC WITH B5 FLANGE / M ,6 0, / M l 5,0 0,7 192 / M ,0 0,9 223
METRIC (IEC) FRAME THYRISTOR RATED DC METRIC (IEC) FRAME MOTORS IP54 These metric dimensioned motors are built to IEC 34-1 electrical and mechanical standards. The IEC 63 and smaller frames are stocked
SERIES 14 SINGLE DOOR CONSOLES TECHNICAL DATA
Operator System Enclosures 1 12 SAGINAW CONTROL ENGINEERING STOCK PRICE LIST SAGINAW CONTROL ENGINEERING STOCK PRICE LIST 13 Series 1 Single Door Consoles Application - Designed for electronic controls
Rittal CS New Basic enclosure
Rittal CS New Basic enclosure Premium quality that pays Added value means exactly that Rittal CS New Basic enclosures draw on our extensive expertise and provide access to an established platform offering