Type 4X Panel Enclosures
|
|
- Roger Bond
- 5 years ago
- Views:
Transcription
1 Type 4 s Type 4 s Type 4 Single-Door Data and Illustration Sheet Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects against corrosion, windblown dust and rain, splashing water and hose directed water Standards UL 508 Listed, Type 4, Type 4, Type 12 and Type 13 SA 22.2 No. 94 ertified, Type 4, Type 4, Type 12 and Type 13 onforms to NEMA Standard for Type 4, Type 4, Type 12 and Type 13 A+1.25 (32) A B-2.75 B B (**B) A (89) 3.50 (89).44 (11) mounting hole (4PL) padlock hasp door clamp (see note on this page) onstruction and door are fabricated from (14) gauge, Type 304 or Type 316L stainless steel All continuous welded seams are finished smooth Doors are secured to the body with a heavy duty stainless steel continuous hinge and pin on one side and easy-to-release stainless steel door clamps mounted to the other three sides Each door has a padlock hasp with sealing hole provision Print pocket provided Door has a seamless poured in place gasket Ground stud provided on door Formed lip around enclosure opening diverts liquids and contaminants s are provided for mounting optional panel External mounting feet are provided for secure wall mounting Finish Door and sides of body have a smooth #4 brushed finish Accessories s NEMA terminal strap kit Terminal blocks Floor stand kit See Accessories section A (-4.75) (-121) B-4.75 mounting feet optional panel Side View A is less than 36) B is less than 36) print pocket (supplied) Front View Section - Notes: Dimensions: **B = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches. 64 EATON ORPORATION May 2013
2 Type 4 s Type 4 Single-Door atalog Number atalog # Size AxBx atalog # Type 304 Type 316L in. mm. Steel onductive in. mm. H S H SS x x x 305 x 152 HAW1612P HAW1612GP x x 229 H S H SS x x x 406 x 152 HAW1616P HAW1616GP x x 330 H S H SS x x x 508 x 152 HAW2016P HAW2016GP x x 330 H S H SS x x x 406 x 152 HAW2016P HAW2016GP x x 330 H S H SS x x x 508 x 152 HAW2020P HAW2020GP x x 432 H S H SS x x x 305 x 152 HAW2412P x x 229 H S H SS x x x 406 x 152 HAW2416P HAW2416GP x x 330 H S H SS x x x 508 x 152 HAW2420P HAW2420GP x x 428 H S H SS x x x 610 x 152 HAW2424P HAW2424GP x x 530 H S H SS x x x 610 x 152 HAW3024P HAW3024GP x x 530 H S H SS x x x 610 x 152 HAW3624P HAW3624GP x x 530 H S H SS x x x 305 x 203 HAW1612P HAW1612GP x x 229 H S H SS x x x 406 x 203 HAW2016P HAW2016GP x x 330 H S H SS x x x 508 x 203 HAW2020P HAW2020GP x x 432 H S H SS x x x 610 x 203 HAW2420P HAW2420GP x x 682 H S H SS x x x 406 x 203 HAW2416P HAW2416GP x x 330 H S H SS x x x 508 x 203 HAW2420P HAW2420GP x x 428 H S H SS x x x 610 x 203 HAW2424P HAW2424GP x x 530 H S H SS x x x 762 x 203 HAW3024P HAW3024GP x x 530 H S H SS x x x 508 x 203 HAW3020P HAW3020GP x x 428 H S H SS x x x 610 x 203 HAW3024P HAW3024GP x x 530 H S H SS x x x 762 x 203 HAW3030P HAW3030GP x x 682 H S H SS x x x 610 x 203 HAW3624P HAW3624GP x x 530 H S H SS x x x 762 x 203 HAW3630P HAW3630GP x x 682 H S H SS x x x 762 x 203 HAW4230P HAW4230GP x x 682 H S H SS x x x 914 x 203 HAW4236P HAW4236GP x x 835 H S H SS x x x 914 x 203 HAW4836P HAW4836GP x x 835 H S H SS x x x 406 x 254 HAW2016P HAW2016GP x x 330 H S H SS x x x 508 x 254 HAW2420P HAW2420GP x x 428 H S H SS x x x 610 x 254 HAW3024P HAW3024GP x x 530 H S H SS x x x 610 x 254 HAW3624P HAW3624GP x x 530 H S H SS x x x 762 x 254 HAW3630P HAW3630GP x x 682 H S H SS x x x 762 x 254 HAW4230P HAW4230GP x x 682 H S H SS x x x 762 x 254 HAW4830P HAW4830GP x x 682 H S H SS x x x 914 x 254 HAW4836P HAW4836GP x x 835 H S H SS x x x 914 x 254 HAW6036P HAW6036GP x x 835 H S H SS x x x 610 x 305 HAW2424P HAW2424GP x x 530 H S H SS x x x 610 x 305 HAW3024P HAW3024GP x x 530 H S H SS x x x 762 x 305 HAW3630P HAW3630GP x x 682 H S H SS x x x 914 x 305 HAW3636P x x 835 H S H SS x x x 914 x 305 HAW4836P HAW4836GP x x 835 H S H SS x x x 914 x 305 HAW6036P HAW6036GP x x 835 H S H SS x x x 610 x 406 HAW3024P HAW3024GP x x 530 H S H SS x x x 762 x 406 HAW3630P HAW3630GP x x 682 H S H SS x x x 914 x 406 HAW4836P HAW4836GP x x 835 H S H SS x x x 914 x 406 HAW6036P HAW6036GP x x 835 Type 4 s Notes: lamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice. EATON ORPORATION May
3 Type 4 s Type 4 Single-Door, Aluminum Data Sheet and atalog Number Finish Door and sides of body have a smooth #4 brushed finish Accessories s NEMA terminal strap kit Terminal blocks Floor stand kit See Accessories section Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects against corrosion, windblown dust and rain, splashing water and hose directed water Standards UL 508 Listed, Type 4, Type 4, Type 12 and Type 13 SA 22.2 No. 94 ertified, Type 4, Type 4, Type 12 and Type 13 onforms to NEMA Standard for Type 4, Type 4, Type 12 and Type 13 onstruction and door are fabricated from (14) gauge, Type H32 aluminum All continuous welded seams are finished smooth Doors are secured to the body with a heavy duty aluminum continuous hinge and pin on one side and easy to operate stainless steel door clamps mounted to the other three sides Each door has a padlock hasp with sealing hole provision Print pocket provided Door has a seamless poured in place gasket Formed lip around enclosure opening diverts liquids and contaminants s are provided for mounting optional panel External mounting feet are provided for secure wall mounting Type 4 s Size AxBx atalog # atalog # in. mm. Steel onductive in. mm. H A x x x 305 x 152 HAW1612P HAW1612GP x x 229 H A x x x 406 x 152 HAW1616P HAW1616GP x x 330 H A x x x 406 x 152 HAW2016P HAW2016GP x x 330 H A x x x 508 x 152 HAW2020P HAW2020GP x x 432 H A x x x 508 x 152 HAW2420P HAW2420GP x x 428 H A x x x 305 x 203 HAW1612P HAW1612GP x x 229 H A x x x 406 x 203 HAW2016P HAW2016GP x x 330 H A x x x 406 x 203 HAW2416P HAW2416GP x x 330 H A x x x 508 x 203 HAW2420P HAW2420GP x x 428 H A x x x 610 x 203 HAW2424P HAW2424GP x x 530 H A x x x 762 x 203 HAW3024P HAW3024GP x x 530 H A x x x 508 x 203 HAW3020P HAW3020GP x x 428 H A x x x 610 x 203 HAW3024P HAW3024GP x x 530 H A x x x 762 x 203 HAW3030P HAW3030GP x x 682 H A x x x 610 x 203 HAW3624P HAW3624GP x x 530 H A x x x 762 x 203 HAW3630P HAW3630GP x x 682 H A x x x 914 x 203 HAW4236P HAW4236GP x x 835 H A x x x 914 x 203 HAW4836P HAW4836GP x x EATON ORPORATION May 2013
4 Type 4 s Type 4 Single-Door, Aluminum Data Sheet and atalog Number Size AxBx atalog # atalog # in. mm. Steel onductive in. mm. H A x x x 406 x 254 HAW2016P HAW2016GP x x 330 H A x x x 508 x 254 HAW2420P HAW2420GP x x 428 H A x x x 610 x 254 HAW3624P HAW3624GP x x 530 H A x x x 762 x 254 HAW3630P HAW3630GP x x 682 H A x x x 762 x 254 HAW4230P HAW4230GP x x 682 H A x x x 610 x 305 HAW2424P HAW2424GP x x 530 H A x x x 610 x 305 HAW3024P HAW3024GP x x 530 H A x x x 762 x 305 HAW3630P HAW3630GP x x 682 H A x x x 914 x 305 HAW4836P HAW4836GP x x 835 H A x x x 914 x 305 HAW6036P HAW6036GP x x 835 H A x x x 610 x 406 HAW3624P HAW3624GP x x 530 H A x x x 762 x 406 HAW3630P HAW3630GP x x 682 H A x x x 914 x 406 HAW4836P HAW4836GP x x 835 B B (**B) 3.50 (89).44 (11) mounting hole (2PL) A-2.75 padlock hasp A+1.25 (32) A B-2.75 door clamp (see note on this page) optional panel print pocket (supplied) Front View 3.50 (89) B-4.75 mounting feet Side View body stiffener (omit where B is less than 30) Type 4 s A-4.75 (omit center studs where A is less than 36) Section - (omit center studs where B is less than 36) Notes: Dimensions: **B = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches. lamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice. EATON ORPORATION May
5 Type 4 s Type 4 Single-Door with 3-Point Locking Data Sheet and atalog Number Finish Door and sides of body have a smooth #4 brushed finish Accessories s Swing-out panel kits NEMA terminal kits Window kits Floor stand kit Replacement handle Type 4 s Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects against windblown dust and rain, splashing water and hose directed water Standards UL 508 Listed, Type 3R, Type 4, Type 4 and Type 12 SA 22.2 No. 94 ertified, Type 3R, Type 4, Type 4 and Type 12 onforms to NEMA Standards for Type 3, Type 3R, Type 4, Type 4 and Type 12 Meets NEMA Type 3R requirements atalog # Size AxBx onstruction and door are fabricated from (14) gauge stainless steel All continuous welded seams are finished smooth Stainless steel continuous hinge and pin Internal 3-point latching with a stainless padlocking handle Door has a seamless poured in place gasket Formed lip around enclosure opening diverts liquids and contaminants Ground stud provided on door Print pocket provided s are provided for mounting optional panel External mounting feet onductive Type 304 Type 316L in. mm. atalog # atalog # in. mm. H S3PT H SS63PT x x x 508 x 152 HAW2420P HAW2420GP x x 428 H S3PT H SS63PT x x x 508 x 203 HAW2420P HAW2420GP x x 428 H S3PT H SS63PT x x x 609 x 203 HAW2424P HAW2424GP x x 530 H S3PT H SS63PT x x x 609 x 203 HAW3024P HAW3024GP x x 530 H S3PT H SS63PT x x x 762 x 203 HAW3030P HAW3030GP x x 682 H S3PT H SS63PT x x x 609 x 203 HAW3624P HAW3624GP x x 530 H S3PT H SS63PT x x x 762 x 203 HAW3630P HAW3630GP x x 682 H S3PT H SS63PT x x x 914 x 203 HAW4836P HAW4836GP x x 835 H S3PT H SS63PT x x x 508 x 254 HAW2420P HAW2420GP x x 428 H S3PT H SS63PT x x x 762 x 254 HAW3630P HAW3630GP x x 682 H S3PT H SS63PT x x x 762 x 254 HAW4230P HAW4230GP x x 682 H S3PT H SS63PT x x x 914 x 254 HAW4836P HAW4836GP x x EATON ORPORATION May 2013
6 Type 4 s Type 4 Single-Door with 3-Point Locking Illustration Sheet and atalog Number atalog # Size AxBx onductive Type 304 Type 316L in. mm. atalog # atalog # in. mm. H S3PT H SS63PT x x x 609 x 305 HAW2424P HAW2424GP x x 530 H S3PT H SS63PT x x x 609 x 305 HAW3024P HAW3024GP x x 530 H S3PT H SS63PT x x x 762 x 305 HAW3630P HAW3630GP x x 682 H S3PT H SS63PT x x x 914 x 305 HAW3636P HAW3636GP x x 835 H S3PT H SS63PT x x x 914 x 305 HAW4236P HAW4236GP x x 835 H S3PT H SS63PT x x x 914 x 305 HAW4836P HAW4836GP x x 835 H S3PT H SS63PT x x x 914 x 305 HAW6036P HAW6036GP x x 835 H S3PT H SS63PT x x x 914 x 406 HAW4836P HAW4836GP x x 835 H S3PT H SS63PT x x x 914 x 406 HAW6036P HAW6036GP x x 835 B B (**B).44 (11) mounting hole (2PL) A+1.25 (32) A B point handle 3-point handle A-2.75 optional panel Front View Side View print pocket (supplied) B-4.75 mounting feet Type 4 s A-4.75 A is less than 36) Section - B is less than 36) Note: Dimensions: **B = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches. Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice. EATON ORPORATION May
7 Type 4 s Type 4 Double-Door with 3-Point Locking Data Sheet and atalog Number Finish Door and sides of body have a smooth #4 brushed finish Accessories s Swing-out panel kits Window kits Floor stand kit Lights Replacement handle Type 4 s Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects against corrosion, windblown dust and rain, splashing water and hose directed water Standards UL 508 Listed, Type 3R, Type 4, Type 4 and Type 12 SA 22.2 No. 94 ertified, Type 3R, Type 4, Type 4 and Type 12 onforms to NEMA Standards for Type 3, Type 3R, Type 4, Type 4 and Type 12 Meets NEMA Type 3R requirements Size AxBx onstruction and cover are fabricated from (14) gauge stainless steel All continuous welded seams are finished smooth Stainless steel continuous hinge and pin Internal 3-point latching with stainless padlocking handles Removable center post for easy panel installation Doors have a seamless poured in place gasket Formed lip around enclosure opening diverts liquids and contaminants Ground stud provided on door Print pocket provided s are provided for mounting optional panel External mounting feet onductive atalog # in. mm. atalog # atalog # in. mm. H SD3PT x x x 1067 x 203 HAW4224P x x 530 H SD3PT x x x 1219 x 203 HAW4824P x x 530 H SD3PT x x x 1067 x 254 HAW4230P HAW4230GP x x 682 H SD3PT x x x 1219 x 254 HAW4830P HAW4830GP x x 682 H SD3PT x x x 1524 x 254 HAW6030P x x 682 H SD3PT x x x 1067 x 305 HAW4236P HAW4236GP x x 835 H SD3PT x x x 1219 x 305 HAW4836P HAW4836GP x x 835 H SD3PT x x x 1524 x 305 HAW6036P HAW6036GP x x 835 H SD3PT x x x 1067 x 305 HAW4242P x x 987 H SD3PT x x x 1219 x 305 HAW4842P HAW4824GP x x 987 H SD3PT x x x 1524 x 305 HAW6042P x x 987 H SD3PT x x x 1219 x 305 HAW4848P x x EATON ORPORATION May 2013
8 Type 4 s Type 4 Double-Door with 3-Point Locking Illustration Sheet B B-6.00 (152).44 (11) mounting hole (2PL) B point handle A+1.25 (32) A A-2.75 rotation print pocket (supplied) optional back panel Front View Side View B-4.75 mounting feet body stiffener (omit where A is less than 30) A is less than 36) Type 4 s A-4.75 Section - Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice. EATON ORPORATION May
Type 4X Panel Enclosures
Type 4X Lift-Off Cover ata Sheet Seamless, poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
More informationType 4 Panel Enclosures
Type 4 Lift-Off Cover ata Sheet Seamless poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use Protects against windblown dust and rain, splashing
More informationType 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
More informationType 4 Panel Enclosures
Ground-Mount Enclosures Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish pplication Houses electrical controls and instruments Easy access panels or
More informationUses, Certifications, and Standards Electrical Control and Instruments, Indoor/Outdoor EXTERNAL FEET, WALL standard UL 508, CSA C22.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 121264CHC Encl 12X12X6 N4 Enclosure Cooper B-Line/Cable Tray Catalog Number Manufacturer escription Weight per unit Product
More informationType 4X Panel Enclosures
Wall-Mount Enclosures Type 4X Premier Series with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge Type 304 or Type 316L stainless steel (see pages 209 & 210)
More informationType 4 Panel Enclosures
Wall-Mount Enclosures Type 4 Premier Series with Quarter-Turn Latches Data Sheet and Catalog Number Accessories Premier panels NEMA panel adapters Depth adjustment brackets Print pockets Padlockable or
More informationDisconnect Enclosures
Type 12 Heavy-Duty Single & Multi-Door Data Sheet pplication Houses electrical controls and equipment Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508
More informationType 4X Panel Enclosures
Ground-Mount Enclosures Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing
More informationDisconnect Enclosures
Wall-Mount Enclosures Type 12 Flange-Mount....................................................................... 296-298 Wall-Mount Enclosures Type 4 & 4X Premier Series 2-Point or 3-Point Locking..........................
More informationType 12 / 13 Enclosures
Type 12 Free-Standing Enclosures ata Sheet pplication Houses electrical controls and instruments Easy access fixed or swing panels for optional equipment ual-access construction available for back-to-back
More informationType 4 X Panel Enclosures
Ground-Mount s Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing out frames
More informationOperator Enclosures. Console Type 12 - AW-14 Data Sheet
Console Data Sheet Construction Console body, panel cover and door, top assembly and writing desk are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Panel cover is secured
More informationCable & Wire Management
able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...
More informationSpec Tech Industrial Electric Control Enclosures
Control Enclosures N Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
More informationTYPE 1 SCREW COVER WIREWAY
TYPE 1 SCREW COVER WIREWAY Construction: C & I Enclosures Type 1 Screw Cover and Hinge Cover Wireway is fabricated in accordance with U.L. specifications from code gauge steel. Wireway is furnished standard
More informationStandard Product. Type 4 Free-Stand Enclosures and Accessories
763.422.2600 Spec-00294 F763.422.2211 Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand, Type 4 INDUSTRY STANDARDS
More information[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]
[ SOLUTIONS FOR AUTOMATION & ONTROL DEVIES: ] INDUSTRY STANDARDS Solid hinged cover models. Mounting brackets required to meet UL/SA external mounting requirements. FEATURES remove and -install hinge pins
More informationPOLYLINE Polycarbonate Enclosures. From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications
POLYLINE Polycarbonate Enclosures From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications Table of ontents lick on the information located within
More informationThe TeleControl Series Technical Drawings
The TeleControl Series Technical Drawings TeleControl TeleControl Enclosures Dimensions SIZE ID NUMBER OVERALL H X W X D INSIDE A X B X C E X F J K L M N HOLE DIA. SHIPPING WEIGHT PANEL NUMBER J1407TC
More informationPhone: Fax: Web: -
empire SERIES For your largest applications, turn to the Empire Series from Allied Moulded. Fiberglass construction offers durability and strength without the excessive weight of a comparable metal enclosure.
More informationIndustrial Enclosures
48J Series - NEMA 2 Large JIC Enclosures Junction Boxes Application Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments. Provides a degree of protection from falling
More informationEN4DSC Disconnect Enclosures - NEMA 4 ABB Controls, Allen Bradley, Cutler Hammer, General Electric, Siemens I-T-E Max-Flex, Square D
EN4DSC Disconnect Enclosures - NEMA 4 Application Designed to house the following safety disconnect equipment: ABB Controls flange mounted variable depth operating mechanisms for disconnect switches and
More informationINDUSTRIAL SOLUTIONS Wallmount Enclosures...pgs IND 1-46 Wireway/Trough...pgs IND Freestanding Enclosures...pgs IND FMD Enclosures...
INDUSTRIL SOLUTIONS Wallmount s...pgs IND 1-46 Wireway/Trough...pgs IND 47-60 Freestanding s...pgs IND 61-72 FMD s...pgs IND 73-86 Operator Interface...pgs IND 87-136 Noncorrosive...pgs IND 137-193 I N
More informationTABLE OF CONTENTS. Manufacturers of Quality Electrical Enclosures. Page: Page:
TABLE OF CONTENTS Page: Access Doors. 9 Aluminum (NEMA 4X) 48 Bussed Current Transformer Cabinets... 7 Current Transformer Cabinets 7 Dividers (Cabinet & Wireway).. 50 Flush Covers (for Screw Cover Boxes).
More informationINDUSTRIAL ELECTRICAL AND EXPLOSIONPROOF ENCLOSURE SYSTEMS
ADALET A SCOTT FETZER COMPANY INDUSTRIAL ELECTRICAL AND EXPLOSIONPROOF ENCLOSURE SYSTEMS #NCAT01 REV. D FOR CENELEC APPROVED UNITS SEE PAGE 2 14562 Pg 00-00 12/2/00 12:36 PM Page 1 Designing Our Products
More informationPhone: Fax: Web: -
control series The larger ontrol Series offers standard features as well as full-panel access and all usable panel space. In addition, the standard grey cover is available with or without a full-length
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationNEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series
NEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series Applications SN4 Series Designed to house the following: Allen-Bradley Bulletin 1494V disconnect switches with flange-mounted variable
More informationHeavy-Duty Enclosures Type 12 Free Standing Disconnect with Sub Panel
eavy-uty Enclosures PPLICTIONS - esigned to provide protection for electrical instruments, terminals, and controls from dust, oil, dirt and dripping liquids. CONSTRUCTION - abricated from 10 gauge carbon
More informationControl Enclosures. Type 1, 3, 3R, 4X, 12 as designated. Type 1, 3, 3R, 4X, 12 as designated WT, HWT, FHLWT
Control Enclosures Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
More informationWall-Mount Enclosures CONCEPT Wall-Mount Enclosures
Spec-00286 H763.422.2211 763.422.2600 Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures, Type 4 and 12 INDUSTRY STANDARDS Wall-mounting brackets required to maintain
More information14x12x7 Inch 48 VDC (PoE) Power-Over-Ethernet Powered, Weatherproof & Insulated with Heating System - Model: NB H0N
14x12x7 Inch 48 VDC (PoE) Power-Over-Ethernet Powered, Weatherproof & Insulated with Heating System - Model: NB141207-4H0N Applications and Features Features: Molded Fiberglass Reinforced Polyester (FRP)
More informationM-2900A Tapchanger Control Cabinet
CONTROLS M-2900A Tapchanger Control Cabinet New installations or retrofit for Cooper, General Electric, Siemens and Howard regulators NEMA 3 rated enclosures available in the following construction materials:
More informationOperator System Enclosures
27 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 Operator Systems are designed to house a wide variety of equipment; panel mount, rack mount, desktop PC s, monitors,
More informationFREE-STANDING ENCLOSURE ACCESSORIES FREE-STANDING ENCLOSURE ACCESSORIES. Swing-Out Panels. Panels (Full & Half Length) For Single-Door Enclosures
118 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 11 ENCLOSURE Panels (Full & Half Length) For Single-Door Enclosures Panels for single-door enclosures can
More informationRMR Free-Standing Enclosures
Protecting your technology investment. RMR Free-Standing Enclosures provide NEMA Type 4 and 12 protection for large electronic components and controls that require sturdy mounting. ADVANTAGES Advanced
More informationACCESSORIES Electric Heater Compact Cooling Fans Floor Stand Kit PANELITE Enclosure Lights BULLETIN: A28SX
763.422.26 SPEC-177 B763.422.2211 DISCONNECT SEQUESTR PREFERRED-CUTOUT DISCONNECTS SEQUESTR EXTERNAL DISCONNECTS SEQUESTR PrefERREd-CutoUT DisconnECTS SEQUESTR ExTERnal Disconnects STAINLESS STEEL SEQUESTR
More information133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST
133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s are designed for control and instrumentation applications. They are a general-purpose enclosure intended for indoor use
More informationPhoenix Thermal Supply
Connection Heads, Blocks, Nipples, and Springs Hinged Heads - Flip Top Hinged Heads and Blocks Nema 4 Rated Flip-Top Design for Easy Access and Closure Hinge Pins and Latches of Stainless Steel Silicone
More informationPhoenix Thermal Supply
Connection Heads, Blocks, Nipples, and Springs Hinged Heads - Flip Top Hinged Heads and Blocks Nema 4 Rated Flip-Top Design for Easy Access and Closure Hinge Pins and Latches of Stainless Steel Silicone
More informationIndustrial Enclosures
www Eclipse Junior Series Single Door Enclosures - NEMA 12, 13, 4... 2 Series 2000, Single Door Enclosures - NEMA 12, 4... 40 1414 Series JIC Enclosures, Clamped, Lift Off Cover - NEMA 12, 13... 4 1414
More informationSERIES 14 SINGLE DOOR CONSOLES TECHNICAL DATA
Operator System Enclosures 1 12 SAGINAW CONTROL ENGINEERING STOCK PRICE LIST SAGINAW CONTROL ENGINEERING STOCK PRICE LIST 13 Series 1 Single Door Consoles Application - Designed for electronic controls
More informationCABINET - INSTRUMENT TRANSFORMER Indoor - Outdoor, 480 Volt Maximum 1200, 1600, 2000 Ampere
Printed from NIPSCO.com 04-01-17 PAGE 1 OF 6 USE: 1. For commercial and industrial installation, purchased and installed by the customer. 2. To enclose 600 volt insulation class instrument transformers
More informationELECTRICAL ENCLOSURES AND MODULAR CABINETS EXM MANUFACTURING LTD. Since 1975
www.exmweb.com ELECTRICAL ENCLOSURES AND MODULAR CABINETS 19 EXM MANUFACTURING LTD. Since 1975 NEMA 12-13 SAFETY DISCONNECT 9500 UxD Right flange mounted disconnect multi-door enclosure The 9500 UxD oil
More informationPreferred Cutout, Disconnect Enclosure, Type 12
763.422.2600 Spec-00245 J763.422.2211 Wall-Mount Preferred-Cutout s Preferred Cutout, s, Type 12 Wall-Mount Preferred-Cutout s Preferred Cutout, s, Type 12 Preferred Cutout, Enclosure, Type 12 INDUSTRY
More informationC-Box Screw Cover with Knockouts NEMA 1. Commercial Enclosures Junction Boxes
C-Box Screw Cover with Knockouts Application Designed for general purpose indoor commercial use as a junction, pull or switch box. Standards UL-50 Type 1 cul Type 1 Complies with: NEMA Type 1 IEC 60529,
More informationRMR Floor-Mount Enclosures
Protecting your technology investment. RMR Floor-Mount Enclosures provide NEMA Type 4 and 12 protection for large electronic components and controls that require sturdy mounting. Floor stands elevate the
More informationAPX Technologies, lnc.
APX Technologies, lnc. EXCELLENCE IN PROTECTION 200 Oregon Street, Mercersburg, PA 17236 Tel. 717-328-9399 Fax.717-328-2447 www.apx-technologies.com 17.63 48.75 112.50 8.50 20.00 6.75 5.00 5.00 7.12 BATTERY
More informationNEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series
NEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series Applications N412_CD Series Designed to house the following: AutomationDirect.com NEMA 1/12 Flexible shaft handle for Molded
More informationSWING DOOR SOFT ENCLOSURE (part# 16733)
800-643-7332 americanlandmaster.com This kit is for use with all fullsize, 2 passenger ALM utility vehicles. SWING DOOR SOFT ENCLOSURE (part# 16733) NOTE TOOLS REQUIRED Drill 1/4 Drill Bit 7/16 Wrench
More informationNEMA 4/12-19" Rack Server Cabinet - Floor Mount KEY FEATURES EXCELLENT QUALITY. Quad Electrical Outlet Box (Option)
Heavy Duty - NEMA 4/12 - Aluminum Rack Server Cabinets Exceptional - Quality - Rugged Enclosures - designed for - All Weather Outdoor Usage. NEMA 4/12 "PCE" Enclosures designed for Toughest Rainy and Washdown
More informationRMR Standard Wall-Mount Enclosures
Protecting your technology investment. RMR Standard Wall-Mount Enclosures provide NEMA Type 4 and 12 protection for smaller electronic components and controls that require sturdy wall mounting. ADVANTAGES
More informationStandard Product Low Profile Type 12 One-Door Disconnect Enclosures
763.422.2600 Spec-00005 M763.422.2211 Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Low-Profile, One- to Five-Door
More informationCT Metering. CT Metering. Meter Mounting Equipment
Single Meter Sockets, Without Bypass - CT Rated.................................. 67-68 Single Meter Sockets, CT Rated With Test Switch Bypass Provision............. 69-70 Meter Socket / Enclosure Combination
More informationPushbutton Enclosures
7 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 are designed to house oil-tight pushbuttons, switches, and pilot lights. These enclosures are primarily used in
More informationTERMINATION ENCLOSURE OPTIONS
TERMINATION ENCLOSURE OPTIONS Add suffix: R - Reverse Stagger the Bus Bars (to run cable in from the top) CU - Copper NEMA Mount Bus Bars C - Plastisol Covers for Bus Bars DF - Dead Fronts T - Tin Plated
More informationSquare-Duct Wireways. Catalog 5100CT0101R06/ Class CONTENTS Description... Page. Wireway Offerings... 3
Catalog 5100CT0101R06/11 2011 Class 5100 CONTENTS Description............................................. Page Wireway Offerings............................................ 3 General Purpose NEMA Type
More informationContinuous Hinge Clamped Cover Enclosures JN4XHSS Series Stainless Steel Enclosures
JIC Continuous Hinge Clamped Cover Enclosures JN4XHSS Series Enclosures Standard Features panel sold separately) Cover is attached with a continuous stainless steel piano hinge. Design Options Type 304
More informationGL66 SERIES STAINLESS STEEL HINGED COVER WALL-MOUNT ENCLOSURES
GL66 SERIES STAINLESS STEEL INGED COVER ALL-MOUNT ENCLOSURES Aesthetic styling and an attractive, stroked finish make GL66STE enclosures an excellent choice when style and functionality are important.
More informationOutdoor Installation Using an Electronic LED Power Supply (TE-60L-12)
0 Edge Lighting. All Rights Reserved. 78 W. Fullerton Ave Chicago, IL 606 Tel: 77-770-9 Fax: 77-9-6 www.edgelighting.com info@edgelighting.com Installation Instructions for Port Round & Square LED PORT-RD-ST-SA
More informationPhysical Specifications
General In This Section Standard Enclosures Landing Systems Load Weighers TLS Switches Physical Specifications General This section is intended to be used as a reference for physical specification of products
More informationDOOR French, Heavy Duty, Individual Dog Model 1620 Features 1
DOOR French, Heavy Duty, Individual Dog Model Features 1 When wider access is needed, FREEMAN MARINE French doors perform like two single panel doors that seal to each other. The same high quality tooling
More informationNetworking: Wall-Mount Cabinets PROTEK Wall-Mount and Double-Hinge Cabinets PROTEK Single-Door Fan and Filter Thermal Packages, UL and NEMA Type 1
PROTEK Single-Door Fan and Filter Thermal Packages, UL and NEMA Type 1 Industry Standards UL 508A Listed; Type 1; File Number E619967 cul Listed per CSA C22.2 No. 9; Type 1; File Number E61997 NEMA / EEMAC:
More informationCatalog Number Material Fits CONCEPT Enclosure CCPM4 Steel When A x B is equal to or less than x in. (762 x 762 mm)
SPEC-00186 CONCEPT Accessories CONCEPT Accessories CONCEPT PANEL CONVERSION KIT Conversion Kit adapts enclosure for mounting standard NEMA-style panels in CONCEPT enclosures. Bracket attaches to rear collar
More information1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight
More informationProduct Datasheet. 2. GRP large rain canopy. 3. GRP door. 4. G.I Mounting plate. 5. G.I Gland plate. 6. EPDM rubber gasket
POLYESTER ENCLOSURE SINGLE DOOR Product Datasheet GRP Single Door Enclosures are used for outdoor application with weatherproof and antistatic properties, finding their major application in the protection
More informationSTAINLESS STEEL ENCLOSURES EQUIPMENT PROTECTION
STAINLESS STEEL ENCLOSURES EQUIPMENT PROTECTION A SUPERIOR CORROSION PROTECTION SOLUTION offman stainless steel enclosures are designed for indoor or outdoor applications that require corrosion protection
More informationJunction Boxes & Enclosures JBES Series: Pre-drilled 316L Stainless Steel Junction Boxes Increased Safety
Je10 Without Terminals ompliance ata: TEX - IE: TEX IE E Ex e II; Ex ia II; Ex ib II T6 to T5 Ex t 21 T80 to T95 Operating Temperatures: -50 to +70 199 TX Product atalog pplications: Terminal junction
More informationWall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type 12
763.422.2600 SPEC-00245 L763.422.2211 DISCONNECT WALL-MOUNT PREFERRED-CUTOUT DISCONNECTS PREFERRED CUTOUT, DISCONNECTS, TYPE 12 Wall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type
More informationThe DiamondShield Series DS
The DS The was developed for design flexibility and pleasing aesthetics. Applications include high-end electronics, harsh corrosive environments, and industrial applications both indoors and out. Unique
More informationEnclosure Specific Accessories - Field Replacement of Standard Latches
Enclosure Specific Accessories - Field Replacement of Standard Latches J Series - JLL150KIT NLL150WTKIT SSLKIT Control / N Series NLL150KIT Field Replacement of Standard Latches FIELD REPLACEMENT OF USED
More informationC OMMERCIAL SOLUTIONS
OMMERIL SOLUTIONS asic luminum Outdoor s... OM 1-2 Small Type I allmount s... OM 3 Large Type I allmount s... OM 4 Small inge over oxes... OM 5 Large inge over oxes... OM 6 Lay-In Type I ireway... OM 7-8
More informationBreakers and switches. Enclosed switches Heavy duty safety switches Fusible and non-fusible Amperes
Breakers and switches Enclosed switches Heavy duty safety switches Fusible and non-fusible 30 1200 Amperes Heavy duty fusible and non-fusible safety switches 30 1200 Amperes Features, product overview
More informationENCLOSURE SOLUTIONS FOR INDUSTRIAL APPLICATIONS STAINLESS STEEL & NON-METALLIC ENCLOSURES
ENCLOSURE SOLUTIONS FOR INDUSTRIAL APPLICATIONS STAINLESS STEEL & NONMETALLIC Over 5 years of proven innovation For more than 5 years Adalet, a Scott Fetzer Company, has been an industry leader in the
More information1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
More informationJB & WM Specification Guide
JB & M Specification Guide Y COOSE RITTAL? Rittal understands the challenges faced every day by our customers as they strive to find solutions to their unique application requirements that aren t just
More informationNexT Range Large sheet steel enclosures
Large sheet steel enclosures 8 Large sheet steel enclosures The NexT Range is the optimum choice for particularly harsh environments. The stainless steel design of the NexT Range can face up to the toughest
More informationStandard Product. Polyester powder paint; RAL 7035 textured light gray standard Custom colors available
Spec-01193 PROLINE G2 External Components Tops Solid Top 16 gauge (1.5 ) steel Additional support provisions need to be made to support top mount air conditioners or other top mount accessories Includes
More informationstyle vision & miscellaneous miscellaneous section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
miscellaneous vision & style miscellaneous INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 311 miscellaneous No. 16377 No. 16858 Carb
More informationWall-Mount Enclosures
Wall-Mount Enclosures Protection When Safety Matters Most When selecting an enclosure, application can be associated with market or product. For example, is your enclosure going to be used in a petrochemical
More informationThe Ex-Cell-I series is made for instrumentation with easy access central locking system and hinged cover.
E X - T E R M I N A L E N C L O S U R E S Stainless Steel Version for Zone and Zone 2 The enclosure range is an ATEX certified enclosure / termination solution for category 2 (Zone) application with an
More informationHOFFMAN FS66S TYPE 4X STAINLESS STEEL FREE-STAND ENCLOSURE
MGDC BS Draft 4 30-07-2014 HOFFMAN FS66S TYPE 4X STAINLESS STEEL FREE-STAND ENCLOSURE The latest Hoffman-branded enclosure from Pentair has been specially designed for housing systems with large components
More informationHorsepower Ratings 240V AC 1 Phase, 2 Phase, 3 Phase, Ampere Catalog List Ship Wt.* Catalog List Ship Wt.* Indoor Type 1 Outdoor Type 3R
Safety Switches Heavy Duty 240 Volt Indoor Type Outdoor Type 3R Horsepower Ratings 240V AC Phase, 2 Phase, 3 Phase, Ampere Catalog List Ship Wt.* Catalog List Ship Wt.* 2 Wire 4 Wire 3 Wire System Rating
More informationINSTRUCTIONS INSTALLATION OF NEMA-3R KIT FOR 43, 44 & 52 FRAME AF-6 DRIVES INTO WELDED ENCLOSURES
INSTRUCTIONS INSTALLATION OF NEMA-3R KIT FOR 43, 44 & 52 FRAME AF-6 DRIVES INTO WELDED ENCLOSURES This instruction sheet is for the installation of NEMA -3R kits available for the AF-6 series drives frames
More informationEaton s enclosed meter family. Single- and multi-unit. enclosed meters
Eaton s enclosed meter family Single- and multi-unit enclosed meters Enclosed meters The Eaton enclosed meter line provides a complete energy metering and data acquisition solution in a single enclosure.
More informationBlind and Polycarbonate Cases FQ Series: stainless steel cases with single door
Series Smart 22 Series Smart Blind and Polycarbonate Cases FQ Series: stainless steel cases with single door The Smart series is the proposal for boxes with and witout inner door for small and medium sized
More informationCAMLOCKS
CAMLOCKS 2 www.illinoislock.com 800-733-3907 CUSTOM ENGINEERED SOLUTIONS With more than 80 years of experience in lock design and manufacturing, Illinois Lock Company has developed a broad range of engineered
More informationACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE
ACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE hvgrid-tech designs and manufactures high voltage cable accessories for all types of cable systems, ranging from 69 kv to
More informationULTRX, Type 4X. Panel Size. Conductive
Spec-00402 EPH FX (763) 422-2600 422-21 Non-Metallic Fiberglass Industry Standards Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File
More informationSteel Enclosures Contents
Contents 12/001 - Type S1GK and GK/SD steel enclosures for industrial control use Type CS and GKP steel enclosures for standard starters Page 12/002 12/002 Type S3GK and GK/DW weatherproof steel enclosures
More informationISO 9001:2008
DOOR Dutch, Heavy Duty, Individual Dog Model Features 1 FREEMAN MARINE Dutch doors perform like a single panel door when regular access is needed, yet the top half can be operated separately from the bottom
More informationCONCEPT Wall-Mount Enclosure Accessories
CONCEPT Wall-Mount Enclosure Accessories The CONCEPT Enclosure Group Accessory Selection Guide Steel section 4 or Stainless Steel Enclosures section 6 Steel section 4 or Stainless Steel Window-Door Enclosures
More informationPolyline Polycarbonate Enclosures
TM Polyline Polycarbonate Enclosures Authorized Distributor: From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications WESCHLER INSTRUMENTS 800-903-9870
More informationCABINET - CURRENT TRANSFORMER Indoor - Outdoor 240 Volts Amperes Maximum
PAGE 1 OF 5 USE: 1. For commercial and industrial installations, purchased and installed by customer. 2. For use on the following services: 1 phase 3 wire 240 volts, 3 phase 3 wire 240 volts, 3 phase 4
More informationSECTION SECTION. EATON 2014 Arrow Hart Buyers Guide
F SECTION SECTION 1 EATON 2014 Arrow Hart Buyers Guide FSECTION Cam-lok Single Pole Connectivity Table of contents Product selector guide F-3 NEMA rating system F-4 F-series F-5 E1010 F-6 E1012 F-7 F-series
More informationCABINET - CURRENT TRANSFORMER Indoor - Outdoor 240 Volts Amperes Maximum
PAGE 1 OF 5 USE: 1. For commercial and industrial installations purchased and installed by the Customer. 2. For use on the following services: 1 phase 3 wire 240 volts, 3 phase 3 wire 240 volts, 3 phase
More informationI Ex-e/Ex-i terminal box I
ID TAG label & bracket Door document holder opti. Security padlock Hasp opti. Technical data Marking accd. to 94/9/EC II G Ex e II / II D Ex td A1 IP66 Temperature class T6 up to +40 C / T5 up to +55 C
More informationCONCEPT Accessories. Catalog Number Material Fits CONCEPT Enclosure CCPM4 Steel When A x B is equal to or less than x in.
Spec-00186 KPH FX (763) 422-2600 422-2211 Accessories CONCEPT Accessories Accessories: CONCEPT Conversion Kit Conversion Kit adapts enclosure for mounting standard NEMAstyle panels in CONCEPT enclosures.
More informationCable & Wire Management
Type 1 Screw over... 8-14 Type 1 Quick-onnect inge over... 15-20 Type 3R nviroshield... 21-24 Type 12... 25-31 eed-through Wireway Type 12... 32-35 eed-through Wireway Type 4X... 36-39 Wiring Trough Type
More information