Standard Product. Polyester powder paint; RAL 7035 textured light gray standard Custom colors available

Transcription

1 Spec PROLINE G2 External Components Tops Solid Top 16 gauge (1.5 ) steel Additional support provisions need to be made to support top mount air conditioners or other top mount accessories Includes four M12 hex bolts for installation EMC Solid Tops Additional Specifications: Plated to provide corrosion resistance while maintaining a metalto-metal contact with the metal fiber gasket Metalized non-woven fabric EMI/RFI material covering UL94HP rated urethane foam gasket Plating exposed in interior and paint over plated exterior PROLINE G2 Solid tops are used to close the top opening on an enclosure frame. Lifting eyes can be used to attach the solid top, in place of the included hardware Seamless polyurethane gasket (UL component recognized) provides a water-tight, dust-tight seal against moisture and contaminants ACCESSORIES Lifting eyes Lifting angles Lifting bar Support Bracket Kit Grid Strap (to form internal grid network/rail system) Hole Seal Bulletin: P40 Catalog Number W () W (in.) D () D (in.) Gauge Fits Frame WxD () Description P2T x500 Painted P2T x600 Painted P2T x400 Painted P2T x500 Painted P2T x600 Painted P2T66HF x600 EMC P2T x800 Painted P2T x400 Painted P2T x500 Painted P2T x600 Painted P2T86HF x600 EMC P2T x800 Painted P2T x1000 Painted P2T x400 Painted P2T x500 Painted P2T x600 Painted P2T106HF x600 EMC P2T x800 Painted P2T x400 Painted P2T x500 Painted P2T x600 Painted P2T x800 Painted P2T x400 Painted P2T x500 Painted P2T x600 Painted P2T x800 Painted P2T x500 Painted P2T x600 Painted P2T x800 Painted 1 Modular Enclosure Solutions SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

2 Model Component Type Width Depth Specialty Catalog Number P2 T Blank 8 6 Blank P2T86 PROLINE G2 Top Blank = solid top P = pagoda top PH = top with cutout for highperformance pagoda vent 18 = = = = = 500 Blank = standard HF = EMC protected NOTE: Not every combination is available as a standard product. EQUIPMENT PROTECTION PH FAX pentairprotect.com Modular Enclosure Solutions 2

3 Pagoda Top Pagoda tops can be used on the top of a modular enclosure for active cooling. The design features a drip-proof raised pagoda vent with a 115-volt integral axial exhaust fan, and includes gasket seals to maintain a NEMA 12 enclosure rating. maintains NEMA 12 Type rating on enclosure when installed Drip-protected, raised pagoda vent Integral axial exhaust fan for active cooling 14-gauge (1.75 ) steel Pagoda Tops 1200 and greater in width have one dripprotected, raised pagoda vent opening positioned over one side that can be oriented for right or left ventilation Seamless polyeurethane gasket between top and frame (UL component recognized) provides a water-tight, dust-tight seal against moisture and contaminants Includes four M12 hex bolts for installation Lifting eyes (not included) can be used instead of bolts ACCESSORIES Lifting eyes touch-up Paint Bulletin: P40 Catalog Number W () W (in.) D () D (in.) Fits Frame WxD () P2TP x500 P2TP x600 P2TP x400 P2TP x500 P2TP x600 P2TP x800 P2TP x400 P2TP x500 P2TP x600 P2TP x800 P2TP x1000 P2TP x400 P2TP x500 P2TP x600 P2TP x800 P2TP x400 P2TP x500 P2TP x600 P2TP x800 P2TP x400 P2TP x500 P2TP x600 P2TP x800 P2TP x500 P2TP x600 P2TP x800 Model Component Type Width Depth Specialty Catalog Number P2 T P 8 6 Blank P2TP86 PROLINE G2 Top Blank = solid top P = pagoda top PH = top with cutout for highperformance pagoda vent 18 = = = = = 500 Blank = standard HF = EMC protected NOTE: Not every combination is available as a standard product. 3 Modular Enclosure Solutions SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

4 Pagoda Exhaust Vent Catalog Number Descriptioin Volts Hz PPT1 LEADWIRE 115V,50/60Hz /60 PPT2 LEADWIRE Pagoda Exhaust Vents can be field-installed on any PROLINE or PROLINE G2 solid top to provide active enclosure cooling. Axial fan and finger guard mounted in housing Drip-protected, raised cover is removable from the inside of the enclosure 14-gauge (1.75 ) steel 115V or 230V versions with lead wires 115V power cord option rated UL Type 1; installing this component on an enclosure brings the enclosure rating to UL Type 1 Includes gasket and mounting hardware Bulletin: P20 High-Performance Pagoda Exhaust Vent High-Performance Pagoda Exhaust Vents can be installed on any PROLINE or PROLINE G2 solid top. Integral centrifugal blower mounted in a protective housing Can be installed on any PROLINE or PROLINE G2 solid top Drip-protected, raised cover is removable from the inside of the enclosure Housing includes a drip-proof removable hood, wire mesh finger guard and perimeter gasket Lead wire or power cord options 115V or 230V versions rated UL Type 1; installing this component on an enclosure brings the enclosure rating to UL Type 1 Installation hardware is included Bulletin: P20 Catalog Number Description Volts Hz Full Load Amps Use with PPTHP1 LEADWIRE Top with high-performance pagoda vent cutout PPTHP2 LEADWIRE Top with high-performance pagoda vent cutout EQUIPMENT PROTECTION PH FAX pentairprotect.com Modular Enclosure Solutions 4

5 High-Performance Pagoda Exhaust Vent Cutout Top The High-Performance Pagoda Exhaust Vent Cutout Top has a cutout that accepts one high-performance pagoda vent. Cutout top for High-Performance, Pagoda Exhaust Vents Bolts are furnished to hold top in position (lifting eyes can be used in place of bolts) Seamless, polyurethane gasket between top and frame (UL component recognized) provides a water-tight, dust-tight seal against moisture and contaminants Ground studs are included Note: A High Performance Pagoda Exhaust Vent can be used with any PROLINE G2 solid top by requesting a cutout modification Bulletin: P40 Catalog Number W () W (in.) D () D (in.) Gauge Fits Frame WxD () P2TPH x 600 P2TPH x 800 P2TPH x 600 P2TPH x Modular Enclosure Solutions SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

6 Notes EQUIPMENT PROTECTION PH FAX pentairprotect.com Modular Enclosure Solutions 6