Disconnect Enclosures

Transcription

1 Type 12 Heavy-Duty Single & Multi-Door Data Sheet pplication Houses electrical controls and equipment Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508 listed, Type 12 S 22.2 No.94 certified, Type 12 onforms to NEM standard for Type 12 Finish Wash and phosphate undercoat NSI 61 gray polyester powder outside with a white polyester powder finish inside Panels have white enamel finish ccessories hannel mounting hardware lank adapter plates Operator adapters Touch-up paint Replacement handle, (see page 422). See ccessories Section Discount Schedule: 2 Subclass: DO0 onstruction Enclosure and door are fabricated from (10) gauge steel ll continuous welded seams are finished smooth Doors are secured to the body with a heavy-duty continuous hinge and a 3-point padlocking handle mechanism Right-side door serves as the master door with a defeater mechanism which requires a screwdriver to open Slave doors cannot open without activating mechanical interlock but can close in any order Universal opening on right-side flange will accommodate most disconnect operators when used with operator adapter, (order separately - see page 445) Doors have a fixed, oil-resistant gasket Ground stud provided on door Print pocket provided Lighting mounting channel provided Fixed s are supported from the front to back for enclosure rigidity Removable allows for easy access and installation Removable s mounted on collar studs and supports Large bolts are supplied Important Note When ordering flange-mounted disconnect enclosures, be sure to include all the necessary components. 1. flange-mounted disconnect enclosure 2. Operator adapter plates MUST be ordered for the specific brand and type of disconnect being used, (see page 445) Disconnect switch (or circuit breaker), operating handle and operating mechanism are not furnished with enclosure, see disconnect ordering information, pages 326, Notes: ooper -Line can provide special sizes, finishes and other modifications. onsult the factory for your special requirements. 320

2 Type 12 Heavy-Duty Single-Door Disconnect Enclosures Enclosure Enclosure Size Panel Size Height x Width x Depth x x Height x Width atalog Number in. mm in. mm FD FS x x x 699 x x x 552 FD FS x x x 851 x x x 705 FD FS x x x 1003 x x x 857 FD FS x x x 1003 x x x 857 FD FS x x x 1003 x x x 857 FD FS x x x 1003 x x x (121) 3-point padlock handle (cw ) (273) ottom View 321

3 Type 12 Heavy-Duty Double-Door Enclosure Enclosure Size Panel Size Height x Width x Depth atalog Number x x Height x Width in. mm in. mm FD FS x x x 1365 x x x 1219 FD FS x x x 1670 x x x 1524 FD FS x x x 1975 x x x 1829 FD FS x x x 1975 x x x 1829 FD FS x x x 1975 x x x 1829 FD FS x x x 1975 x x x 1829 FD FS x x x 1975 x x x (121) (273) 3-point padlock handle removable ottom View 322

4 Type 12 Heavy-Duty Three-Door Disconnect Enclosures Enclosure Enclosure Size Panel Size Panel Size Height x Width x Depth D E x x Height x Width Height x Width atalog Number in. mm in. mm in. mm in. mm in. mm FD FS x x x 2527 x x x x x 1524 FD FS x x x 2985 x x x x x 1829 FD FS x x x 2985 x x x x x point padlock handle D E D-4.00 (102) E-5.75 (146) (273) removable fixed fixed center post support ottom View 323

5 Type 12 Heavy-Duty Four-Door Enclosure Enclosure Size Panel Size Height x Width x Depth Height x Width atalog Number in. mm in. mm FD FS x x x 4001 x x x point padlock handle (2000) (4001) (2000) (1861) (2134) fixed removable fixed center post support (457) ottom View 324

6 Type 12 Heavy-Duty Five-Door Disconnect Enclosures Enclosure Enclosure Size Panel Size Panel Size Height x Width x Depth Height x Width Height x Width atalog Number in. mm in. mm in. mm FD FS x x x 4997 x x x x x point padlock handle (2000) (4997) (1969) (1029) (883) (1861) (2134) removable fixed fixed center post support (457) ottom View 325

7 Type 12 Heavy-Duty Single & Multi-Door Illustration Sheet 4.00 (102) 3.37 (86) see universal opening detail 4.00 (102) 3.37 (86) see universal opening detail this area represents disconnect switch or circuit breaker this area represents disconnect switch or circuit breaker 2.75 (70) 3.25 (83) D 3.00 (76) D 3.50 (89) Flange Mounting (1 and 2 door enclosures) Flange Mounting (3, 4 and 5 door enclosures) 1.12 (28).28 D (Typ) (7) The dimensional information provided in these drawings is derived from information supplied by the manufacturer of the equipment to be installed. Fit and function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the applicable regulations, codes and standards (252) 9.31 (236) Universal opening must be filled with an operator adapter kit for the specific brand and type of disconnect being used, (see page 445). Important Note 1.62 (41) Universal Opening Detail When ordering flange-mounted disconnect enclosures, be sure to include all the necessary components. 1. flange-mounted disconnect enclosure 2. Operator adapter plates MUST be ordered for the specific brand and type of disconnect being used, (see page 445) Disconnect switch (or circuit breaker), operating handle and operating mechanism are not furnished with enclosure, see disconnect ordering information, pages 326, Notes: Refer to disconnect table for associated dimensions. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice. 326