Type 4 X Panel Enclosures

Transcription

1 Ground-Mount s Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing out frames Replacement handle, See ccessories section pplication Houses electrical controls and electrical instruments in harsh environments Provides quick and easy access indoors and out Protects against circulating dust, falling dirt, dripping non-corrosive liquids, rain, sleet, ice, splashing and hose directed water Standards UL 508 listed, Type 3R, 4, 4X, 12 S 22.2 No.94 certified, Type 3R, 4, 4X, 12 onforms to NEM standard for Type 3, 3R, 4, 4X, 12 E.I.. RS-310- Meets NEM Type 3RX requirements NSF riteria -2 onstruction and door are fabricated from (12) gauge steel ll continuous welded seams are finished smooth oors are secured to the body with a heavy-duty concealed lift-off hinge and a 3-point vault handle locking mechanism on each door Removable center post oors have a fixed, oil-resistant gasket Ground stud provided on doors and bodies Print pocket provided Large lifting eyes are integrated with sides of enclosure Mounting channels are welded inside for locating panels or rack mounts along enclosure depth, as well as studs for fixed panels Swing panels, single full and single half panels can be installed in double-door enclosures when the center post is used variety of optional panels and accessories are available, (see pages ) iscount Schedule: 2 Subclass: VS0 & VT0 Finish oors and sides of body have a smooth #4 brushed finish Notes: ooper -Line can provide special sizes, finishes and other modifications. onsult the factory for your special requirements. 240 ourtesy of Steven Engineering, Inc Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

2 Ground-Mount s Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking Illustration Sheet and atalog Number Size atalog Number x epth Type 304 Type 316L x x E Stainless Steel Stainless Steel in. mm in. mm in. mm ES XS ES XSS x x x 1219 x ES XS ES XSS x x x 1219 x ES XS ES XSS x x x 1219 x ES XS ES XSS x x x 1219 x ES XS ES XSS x x x 1524 x ES XS ES XSS x x x 1524 x ES XS ES XSS x x x 1524 x ES XS ES XSS x x x 1524 x ES XS ES XSS x x x 1524 x ES XS ES XSS x x x 1524 x ES XS ES XSS x x x 1524 x ES XS ES XSS x x x 1524 x ES XS ES XSS x x x 1829 x ES XS ES XSS x x x 1829 x ES XS ES XSS x x x 1829 x ES XS ES XSS x x x 1829 x (53) integrated lifting eyes sloped trough collar lighting bracket concealed lift-off hinges E Min=-2.60 (66) Max=-3.20 (81) removable center post / (50) padlockable 3-point locking mechanism 5.43 (138) 2.00 (51) adjustable back & side panel provisions body stiffeners (100) 4.09 (104) Front View adjustable top & bottom provisions 2.65 (67) grounding & bonding provisions on door & body Side View 241 ourtesy of Steven Engineering, Inc Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

3 Free-Standing ccessories Type 4X Single-oor Full and Half Panel Illustration Sheet and atalog Number iscount Schedule: 2 Full Panel (Single-oor) Panel Panel Size Fits atalog x Number in. mm in. mm in. mm F6024P x x x x 610 F6036P x x x x 914 F7224P x x x x 610 F7230P x x x x 762 F7236P x x x x 914 F9024P x x x x 610 F9036P x x x x 914 Half Panel (Single-oor) Panel Panel Size Fits atalog x Number in. mm in. mm in. mm F6024HP x x x x 610 F6036HP x x x x 914 F7224HP x x x x 610 F7230HP x x x x 762 F7236HP x x x x 914 F9024HP x x x x 610 F9036HP x x x x panel side bracket included (see illustration 1 page 248 and detail sheet page 249) Half Panel (upper mount) Full Panel Half Panel (lower mount) Full Panel Mounting Half Panel Mounting Note: Full and Half panel for single-door, single and dual-access enclosures are (12) gauge steel and furnished with panel side brackets and all necessary for channel and panel. Half Panels can be mounted in either the upper or lower portion of the enclosure. Free standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, Full and Half panels can be mounted back-to-back. 242 ourtesy of Steven Engineering, Inc Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

4 Free-Standing ccessories Type 4X ouble-oor Full Panel Illustration Sheet and atalog Number Type 4 X Panel s iscount Schedule: 2 Panel Panel Size Fits atalog x Number in. mm in. mm in. mm in. mm F6048P x x x x 1219 F6060P x x x x 1524 F7248P x x x x 1219 F7260P x x x x 1524 F7272P x x x x 1829 F9048P x x x x 1219 F9072P x x x x panel side bracket included (see illustration 1 page 248 and detail sheet page 249) Full Panel center post included with double-door full panel (see illustration 5 page 248) Full Panel Mounting Notes: Full Panel for double-door, single and dual-access enclosures are (10) gauge steel and furnished with Panel rackets, enter Post assembly, panel handle kit and all necessary for channel and panel. The enter Post assembly offers additional support of panel and equipment. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, Full and Half Panels can be mounted back-to-back. 243 ourtesy of Steven Engineering, Inc Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

5 Free-Standing ccessories Type 4X ouble-oor Half Panel Illustration Sheet and atalog Number iscount Schedule: 2 Panel Panel Size Fits atalog x Number in. mm in. mm in. mm in. mm F6048HP 24.75x x x x1219 F7248HP 30.75x x x x1219 F7260HP 30.75x x x x1524 F7272HP 30.75x x x x1829 F9048HP 39.75x x x x1219 F9072HP 39.85x x x x panel side bracket included (see illustration 1 page 248 and detail sheet page 249) Half Panel (upper mount) Half Panel (lower mount) Half Panel Mounting center post or double-door panel support bracket (sold separately) (see illustration 5 page 248) Note: Half panel for double-door, single and dual-access enclosures are (12) gauge steel and furnished with Panel rackets and all necessary for channel and panel. enter Post assembly or a double-door panel support bracket (catalog number FSUP2) for additional support of the panel is optional and sold separately. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, Full and Half Panels can be mounted back-to-back. 244 ourtesy of Steven Engineering, Inc Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

6 Free-Standing ccessories Type 4X Side Panel nd enter Post Illustration Sheet and atalog Number Type 4 X Panel s iscount Schedule: 2 Side Panel Panel Panel Size Fits Height epth* x atalog Number in. mm in. mm in. mm in. mm F6018SP x x F7218SP x x F7224SP x x F9018SP x x F9024SP x x enter Post enter Post Fits Height atalog Number in. mm in. mm in. mm F60PS F72PS F90PS * ack panels restrict the movement of side panels and will prohibit in some depths. See detail sheet for back panel spacing (54) Side Panel Side Panel Mounting Side Panels are (12) gauge steel and furnished with necessary for channel. They will fit any width enclosure and are adjustable along its depth, however, when Full or Half Panels are installed, movement will be restricted and with some depths make side prohibitive. enter Post ssembly enter Post assembly is furnished with all double-door Full Panels and includes necessary for channel and panel. The enter Post is optional on double-door Half Panels and Swing Panel and must be ordered separately. It attaches to the top and bottom channels making it adjustable along the depth of the enclosure. See illustration #5 on the etail Sheet-page ourtesy of Steven Engineering, Inc Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

7 Free-Standing ccessories Type 4X Single-oor Full and Half Swing Panel Illustration Sheet and atalog Number iscount Schedule: 2 Full Swing Panel (Single-oor) Panel Panel Size Fits atalog x Number in. mm in. mm in. mm F6024SWP x x x x 610 F6036SWP x x x x 914 F7224SWP x x x x 610 F7230SWP x x x x 762 F7236SWP x x x x 914 F9024SWP x x x x 610 F9036SWP x x x x 914 Half Swing Panel (Single-oor) Panel Panel Size Fits atalog x Number in. mm in. mm in. mm F6024HSWP x x x x 610 F6036HSWP x x x x 914 F7224HSWP x x x x 610 F7230HSWP x x x x 762 F7236HSWP x x x x 914 F9024HSWP x x x x 610 F9036HSWP x x x x (81) 2.06 (52) 3.18 (81) 2.06 (52) hinge swing panel bracket assembly included (See detail sheet page 250) Half Swing Panel (upper mount) hinge Full Swing Panel panel side bracket included (see illustration 1 page 248 and detail sheet page 250) hinge Half Swing Panel (lower mount) Full Swing Panel Mounting Half Swing Panel Mounting Note: Full Swing Panel and Half Swing Panel for single-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge swing panel bracket and furnished with Panel rackets and all necessary for channel and panel. Panels can be installed so they hinge on either the left or right side. In addition, Half Panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to be adjustable along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the front. With dual-access enclosures, Full and Half Swing Panels can be mounted back-to-back. Notes: ooper -Line can provide special sizes, finishes and other modifications. onsult the factory for your special requirements. 246 ourtesy of Steven Engineering, Inc Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

8 Free-Standing ccessories Type 4X ouble-oor Full and Half Swing Panel Illustration Sheet and atalog Number Type 4 X Panel s iscount Schedule: 2 Full Swing Panel (Single-oor) Panel Panel Size Fits atalog x Number in. mm in. mm in. mm F6024SWP x x x x 1219 F7224SWP x x x x 1219 F7230SWP x x x x 1524 F7236SWP x x x x 1829 F9024SWP x x x x 1219 F9036SWP x x x x 1829 Half Swing Panel (Single-oor) Panel Panel Size Fits atalog x Number in. mm in. mm in. mm F6024HSWP x x x x 1219 F7224HSWP x x x x 1219 F7230HSWP x x x x 1524 F7236HSWP x x x x 1829 F9024HSWP x x x x 1219 F9036HSWP x x x x 1829 enter Post assembly and enter racket must be ordered separately (81) 3.18 (81) panel center bracket (sold separately) (see illustration 2 page 248) hinge Full Swing Panel Swing Panel Mounting hinge Half Swing Panel (lower mount) swing panel bracket assembly included (see detail sheet page 250) center post and panel center bracket (sold separately) (see illustration 2 and 5 page 248) Note: Full Swing Panel and Half Swing Panel for double-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge swing panel bracket, and furnished with necessary for side channel. enter Post assembly and enter racket must be ordered separately. Panels can be installed so they hinge either on the left or right side. In addition, Half Panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to adjust along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the front. With dual-access enclosures, Full and Half Swing Panels can be mounted back-to-back. 247 ourtesy of Steven Engineering, Inc Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

9 Free-Standing ccessories Type 4X Miscellaneous ccessories Illustration Sheet and atalog Number iscount Schedule: 2 Miscellaneous ccessories atalog Number escription Illustration Quantity FSRKT1 Panel side bracket 1 1 FRKT3 Panel center bracket 2 3 FMH3 hannel 3 3 FPSUP2 ouble-door panel support bracket 4 2 center bracket channel spring nut panel nut panel stud side bracket channel panel nut bracket Illustration 1 Illustration 2 bracket panel stud channel spring nut channel center post Illustration 3 panel bolt panel bolt panel bolt panel nut install panel bolt in this hole for top of panel support panel bolt channel panel support bracket channel spring nut panel stud panel nut channel bracket panel nut center post center post bracket post bracket channel spring nut Illustration 4 Illustration 5 See catalog number page ourtesy of Steven Engineering, Inc Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

10 Free-Standing etails Type 4X Panel and etail Sheet Type 4 X Panel s iscount Schedule: 2 enclosure width (146) 2.87 min 3.00 min (76) 2.87 Single oor (section view showing full panels mounted back-to-back) 1/2 enclosure width (146) 3.75 min (95) 2.87 min 2.87 L ouble oor (section view showing full panels mounted back-to-back) (of enclosure) 249 ourtesy of Steven Engineering, Inc Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

11 Free-Standing etails Type 4X Swing Panel and etail Sheet iscount Schedule: 2 enclosure width (154) min 5.00 min (127) 3.18 (81) Single oor (section view showing swing panels mounted back-to-back) 3.18 (81) 1/2 enclosure width (154) 5.00 min (127) 2.87 min 2.87 ouble oor (section view showing swing panels mounted back-to-back) L (of enclosure) Notes: ooper -Line can provide special sizes, finishes and other modifications. onsult the factory for your special requirements. 250 ourtesy of Steven Engineering, Inc Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

12 Free-Standing s ccessories Rack Mounting ngles Illustration Sheet and atalog Number Type 4 X Panel s iscount Schedule: 2 Heavy uty Rack Mounting ngles are designed for 19 (482mm) equipment in free-standing enclosures. enter Post ssembly, FxxPS on page 245, and a Panel Mounting enter racket, FRKT3 on page 248, (each sold separately) are required when in any double door enclosure. Mounting holes are spaced at the 19 EI Standard and are provided to accept #10-32, #12-24, or M6 cage nuts (sold in packages of 100), on page 252. L Equipment Mounting Holes To ccept #10-32, #12-24, or M6 age Nuts (Sold Separately) Note: L-shaped angles are universal and can be rotated to accommodate 19 or 23 EI equipment (89) 1.50 (38) ngle Profile L Shaped Mounting ngles atalog Fits Mounting Number Height L U s in. mm in. mm ES-48RM-L ES-60RM-L ES-72RM-L ES-90RM-L Kit contains two (2) full length L angles, installation instructions, and necessary to mount in single-door enclosures. Yellow Zinc finish. Hole Pattern E.375 (9) Square Hole = 1.75 (44) =.625 (16) =.500 (13) =.295 (7) E =.250 (6) L Equipment Mounting Holes To ccept #10-32, #12-24, or M6 age Nuts (Sold Separately) U Shaped Mounting ngles atalog Fits Mounting Number Height L U s in. mm in. mm ES-48RM-U ES-60RM-U ES-72RM-U ES-90RM-U Kit contains two (2) full length U angles, installation instructions, and necessary to mount in single-door enclosures. Yellow Zinc finish (36) O...75 (19) 2.29 (58) O (38) O.. Hole Pattern E.375 (9) Square Hole = 1.75 (44) =.625 (16) =.500 (13) =.295 (7) E =.250 (6) 251 ourtesy of Steven Engineering, Inc Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

13 Free-Standing s ccessories Frames & Fasteners Illustration Sheet and atalog Number iscount Schedule: 2 Swing-Out Rack Mounted Frame atalog Fits Number Height L in. mm in. mm ES-48SORMF ES-60SORMF ES-72SORMF ES-90SORMF Heavy uty Swing-Out Rack Mounting Frames are designed for 19 (482mm) equipment in free standing enclosures. enter Post ssembly, FxxPS on page 245, and a Panel Mounting enter racket, FRKT3 on page 248, (each sold separately) are required when in any double door enclosure. Mounting holes are spaced per the EI Standard and are provided to accept #10-32, #12-24, or M6 cage nuts (sold in packages of 100). Swing-Out Rack Mounting frames have white powder coated finish. Equipment Mounting Holes To ccept #10-32, #12-24, or M6 age Nuts (Sold Separately - See elow) L Hole Pattern E.375 (9) Square Hole = 1.75 (44) =.625 (16) =.500 (13) =.295 (7) E =.250 (6) Screws & age Nuts atalog Number escription Finish Screws E2M1032PHMS100 #10-32 Phillips lear Zinc E2M1224PHMS100 #12-24 Phillips lear Zinc E2MM6PHMS100 M6 Phillips Yellow Zinc age Nuts E2MN #10-32 Threads lear Zinc E2MN #12-24 Threads lear Zinc E2MNM6100 M6 Threads Yellow Zinc Sold in bags of (100) (494) O.. Screws age Nuts Notes: ooper -Line can provide special sizes, finishes and other modifications. onsult the factory for your special requirements. imensions are in inches. Millimeters shown are for reference only. ata subject to change without notice. 252 ourtesy of Steven Engineering, Inc Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

14 Free-Standing s ccessories Floor Stand & Stabilizer Kits Illustration Sheet and atalog Number Type 4 X Panel s iscount Schedule: 2 Floor Stand Kits atalog Number Stainless in. mm in. mm in. mm MFK12XS MFK16XS MFK20XS MFK24XS Floor Stand Kits are intended for use with Enviro Shield Type 4X, Type 4 and Type 12 s where floor support is required. Each kit consists of two (10) gauge legs and for. t the base of each leg is a prepunched plate (see drawing). Steel kits have a gray polyester powder paint finish. Stainless steel kits are fabricated from 304 stainless steel. Standard Floor Stand Kits are 12 inches (305 mm) high. For special heights, special material or nonstandard construction consult the factory (117) 9.87 (251) 4.62 (117).50 hole (13) (305) L.50 hole (13) 7.87 (200) 7.87 (200) 7.87 (200) Floor Stand Kit.75 (19) ase eep Hex Nut Sanitary Leg Kit atalog Number escription ES-SMFK6 ase eep Set of four (4) legs Kit allows space between enclosure and floor for compliance in NSF environments 1 3 /4 (44mm) adjustment provides flexibility in all applications. Four (4) legs per kit, maintains UL/cUL Type 4X rating when properly installed. Flat Washer 6.00 (152).75 (19) 1.75 (44) djustment Sealing Washer Leg Sleeve 253 ourtesy of Steven Engineering, Inc Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)