Type 4 Panel Enclosures
|
|
|
- Sybil Tucker
- 5 years ago
- Views:
Transcription
1 Type 4 Lift-Off Cover ata Sheet Seamless poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use Protects against windblown dust and rain, splashing water and hose directed water Standards UL 508 Listed, Type 4, Type 12 and Type 13 CSA C22.2 No. 94 Certified, Type 4, Type 12 and Type 13 Conforms to NEMA Standard for Type 4, Type 12 and Type 13 Conforms to JIC Standard EGP Construction Enclosure and cover are fabricated from (16) gauge steel All continuous welded seams are finished smooth Cover is secured to the body with easy-to-operate stainless steel screw clamps mounted on all four sides Cover has a seamless poured in place gasket Ground stud provided on cover #10-32 weld nuts are provided for optional panel on 6 x 4 and larger enclosures External feet are provided for secure wall inish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Panels JIC terminal strap kit JIC terminal strip kit Terminal blocks Touch-up paint See Accessories section 2 EATON CORPORATION May 2013
2 Type 4 Lift-Off Cover Illustration Sheet and Catalog Number Enclosure Enclosure Size Height x Width x epth AxBxC E Panel Catalog Number Panel Size Height x Width Catalog # in. mm. in. mm. in. mm. in. mm. Painted Conductive in. mm. CH443-4LC 4.00 x 4.00 x x 102 x CH643-4LC 6.00 x 4.00 x x 102 x CHAW64P CHAW64GP 4.87 x x 73 CH LC 8.00 x 6.00 x x 152 x CHAW86P CHAW86GP 6.87 x x 124 CH664-4LC 6.00 x 6.00 x x 152 x CHAW66P CHAW66GP 4.87 x x 124 CH1084-4LC x 8.00 x x 203 x CHAW108P CHAW108GP 8.87 x x 174 CH LC x x x 254 x CHAW1210P CHAW1210GP x x 225 CH LC x x x 305 x CHAW1412P CHAW1412GP x x 276 CH LC x x x 356 x CHAW1614P CHAW1614GP x x 327 CH443-4LC CH643-4LC CH LC CH664-4LC A B A-1.00 B-1.00 A (8) hole (4PL) A+.75 (19) C C-.46 (12) optional panel CH1084-4LC CH LC CH LC E CH LC weld nut (4PL) B-2.00 (51) feet clamp Side View B-1.75 ront View Cover Clamp Layout Notes: imensions are in inches. Millimeters shown are for reference only. ata subject to change without notice. EATON CORPORATION May
3 Type 4 Continuous Hinge Cover ata Sheet Seamless poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use Protects against windblown dust and rain, splashing water and hose directed water Standards UL 508 Listed, Type 4, Type 12 and Type 13 CSA C22.2 No. 94 Certified, Type 4, Type 12 and Type 13 Conforms to NEMA Standard for Type 4, Type 12 and Type 13 Conforms to JIC Standard EGP Construction Enclosure and cover are fabricated from (16) gauge steel All continuous welded seams are finished smooth Cover is secured to the body with a continuous hinge on one side and easy-to-operate stainless steel screw clamps mounted to the opposite side Stainless steel hinge pin Cover has a seamless poured in place gasket Ground stud provided on cover #10-32 weld nuts are provided for optional panel on 6 x 4 and larger enclosures External feet are provided for secure wall inish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Panels JIC terminal strap kit JIC terminal strip kit Terminal blocks Touch-up paint See Accessories section 4 EATON CORPORATION May 2013
4 Type 4 Continuous Hinge Cover Illustration Sheet and Catalog Number Enclosure Enclosure Size Height x Width x epth AxBxC E Panel Catalog Number Panel Size Height x Width Catalog # in. mm. in. mm. in. mm. in. mm. Steel Conductive in. mm. CH443-4CHC 4.00 x 4.00 x x 102 x CH643-4CHC 6.00 x 4.00 x x 102 x CHAW64P CHAW6G4P 4.87 x x 73 CH CHC 8.00 x 6.00 x x 152 x CHAW86P CHAW86GP 6.87 x x 124 CH644-4CHC 6.00 x 4.00 x x 102 x CHAW64P CHAW64GP 4.87 x x 73 CH664-4CHC 6.00 x 6.00 x x 152 x CHAW66P CHAW66GP 4.87 x x 124 CH1084-4CHC x 8.00 x x 203 x CHAW108P CHAW108GP 8.87 x x 174 CH CHC x x x 254 x CHAW1210P CHAW1210GP x x 225 CH1086-4CHC x 8.00 x x 203 x CHAW108P CHAW108GP 8.87 x x 174 CH CHC x x x 305 x CHAW1212P CHAW1212GP x x 276 CH CHC x x x 305 x CHAW1412P CHAW1412GP x x 276 CH CHC x x x 356 x CHAW1614P CHAW1614GP x x 327 CH443-4CHC CH643-4CHC CH CHC CH644-4CHC CH664-4CHC A+.75 (19) A-1.75 continuous hinge B A-1.00 B (8) hole (4PL) E A C C-.46 (12) optional panel CH1084-4CHC CH1086-4CHC CH CHC CH CHC CH CHC weld nut (4PL) B-2.00 (51) feet clamp Side View CH CHC B-1.75 ront View Cover Clamp Layout Notes: imensions are in inches. Millimeters shown are for reference only. ata subject to change without notice. EATON CORPORATION May
5 Type 4 Continuous Hinge Cover with Quarter-Turn Latches ata and Illustration Sheet inish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Panels Swing-out panel kits JIC terminal kits Window kits Locks and latches Application Houses electrical controls and instruments Intended for indoor or outdoor use Protects against windblown dust and rain, splashing water and hose directed water Standards UL 508 Listed, Type 4, Type 12 CSA C22.2 No. 94 Certified, Type 4, Type 12 Conforms to NEMA Standards for Type 3, Type 4, Type 12 Conforms to JIC Standards EGP Construction Enclosure and cover are fabricated from (16) gauge steel All continuous welded seams are finished smooth Continuous hinge with stainless steel hinge pin Slotted quarter-turn flush latch(es) Cover has a seamless poured in place gasket Ground stud provided on cover #10-32 weld nuts are provided for optional panel on 6 x 4 and larger enclosures External feet B.31 (8) hole (4PL) C A+.75 (19) A-1.75 continuous hinge A-1.00 B-1.00 quarterturn latches E A omit top & bottom latches when A is 10 or less omit center latch when A is 12 or greater C-.46 (12) optional panel weld nut (4PL) ront View B-2.00 (51) feet Side View B EATON CORPORATION May 2013
6 Type 4 Continuous Hinge Cover with Quarter-Turn Latches Illustration Sheet and Catalog Number Enclosure Enclosure Size Height x Width x epth AxBxC Quarter-Turn Latch Layout E Panel Conductive CH443-4QT CH643-4QT CH QT CH864-4QT CH444-4QT CH644-4QT CH664-4QT CH1264-4QT CH QT CH QT CH QT CH1486-4QT CH QT CH884-4QT CH866-4QT CH886-4QT CH1084-4QT CH1086-4QT CH QT CH QT CH QT CH QT CH QT CH QT CH QT Panel Size Height x Width Catalog # in. mm. in. mm. in. mm. Catalog # Catalog # in. mm. CH443-4QT 4.00 x 4.00 x x 101 x CH643-4QT 6.00 x 4.00 x x 101 x CHAW64P CHAW64GP 4.87 x x 73 CH QT 8.00 x 6.00 x x 152 x CHAW86P CHAW86GP 6.87 x x 123 CH864-4QT 8.00 x 6.00 x x 152 x CHAW86P CHAW86GP 6.87 x x 123 CH444-4QT 4.00 x 4.00 x x 101 x CH644-4QT 6.00 x 4.00 x x 101 x CHAW64P CHAW64GP 4.87 x x 73 CH664-4QT 6.00 x 6.00 x x 152 x CHAW66P CHAW66GP 4.87 x x 123 CH884-4QT 8.00 x 8.00 x x 203 x CHAW88P CHAW88GP 6.87 x x 174 CH1084-4QT x 8.00 x x 203 x CHAW108P CHAW108GP 8.87 x x 174 CH1264-4QT x 6.00 x x 152 x CHAW126P x x 123 CH QT x x x 254 x CHAW1210P CHAW1210GP x x 225 CH866-4QT 8.00 x 6.00 x x 152 x CHAW86P CHAW86GP 6.87 x x 123 CH886-4QT 8.00 x 8.00 x x 203 x CHAW88P CHAW88GP 6.87 x x 174 CH1086-4QT x 8.00 x x 203 x CHAW108P CHAW108GP 8.87 x x 174 CH QT x x x 254 x CHAW1010P CHAW1010GP 8.87 x x 225 CH QT x x x 254 x CHAW1210P CHAW1210GP x x 225 CH QT x x x 305 x CHAW1212P CHAW1212GP x x 276 CH1486-4QT x 8.00 x x 203 x CHAW148P x x 174 CH QT x x x 305 x CHAW1412P CHAW1412GP x x 276 CH QT x x x 254 x CHAW1610P x x 225 CH QT x x x 355 x CHAW1614P CHAW1614GP x x 327 CH QT x x x 254 x CHAW1210P CHAW1210GP x x 225 CH QT x x x 305 x CHAW1412P CHAW1412GP x x 276 CH QT x x x 355 x CHAW1614P CHAW1614GP x x 327 CH QT x x x 355 x CHAW1614P AW1614GP x x 327 Notes: imensions are in inches. Millimeters shown are for reference only. ata subject to change without notice. EATON CORPORATION May
Type 4X Panel Enclosures
Type 4X Lift-Off Cover ata Sheet Seamless, poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
Uses, Certifications, and Standards Electrical Control and Instruments, Indoor/Outdoor EXTERNAL FEET, WALL standard UL 508, CSA C22.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 121264CHC Encl 12X12X6 N4 Enclosure Cooper B-Line/Cable Tray Catalog Number Manufacturer escription Weight per unit Product
Type 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
Type 4 Panel Enclosures
Wall-Mount Enclosures Type 4 Premier Series with Quarter-Turn Latches Data Sheet and Catalog Number Accessories Premier panels NEMA panel adapters Depth adjustment brackets Print pockets Padlockable or
Type 4X Panel Enclosures
Type 4 s Type 4 s Type 4 Single-Door Data and Illustration Sheet Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
Type 4 Panel Enclosures
Ground-Mount Enclosures Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish pplication Houses electrical controls and instruments Easy access panels or
Type 4X Panel Enclosures
Wall-Mount Enclosures Type 4X Premier Series with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge Type 304 or Type 316L stainless steel (see pages 209 & 210)
Operator Enclosures. Console Type 12 - AW-14 Data Sheet
Console Data Sheet Construction Console body, panel cover and door, top assembly and writing desk are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Panel cover is secured
Type 12 / 13 Enclosures
Type 12 Free-Standing Enclosures ata Sheet pplication Houses electrical controls and instruments Easy access fixed or swing panels for optional equipment ual-access construction available for back-to-back
Disconnect Enclosures
Wall-Mount Enclosures Type 12 Flange-Mount....................................................................... 296-298 Wall-Mount Enclosures Type 4 & 4X Premier Series 2-Point or 3-Point Locking..........................
Wall-Mount Enclosures CONCEPT Wall-Mount Enclosures
Spec-00286 H763.422.2211 763.422.2600 Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures, Type 4 and 12 INDUSTRY STANDARDS Wall-mounting brackets required to maintain
Disconnect Enclosures
Type 12 Heavy-Duty Single & Multi-Door Data Sheet pplication Houses electrical controls and equipment Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508
133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST
133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s are designed for control and instrumentation applications. They are a general-purpose enclosure intended for indoor use
C-Box Screw Cover with Knockouts NEMA 1. Commercial Enclosures Junction Boxes
C-Box Screw Cover with Knockouts Application Designed for general purpose indoor commercial use as a junction, pull or switch box. Standards UL-50 Type 1 cul Type 1 Complies with: NEMA Type 1 IEC 60529,
Pushbutton Enclosures
7 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 are designed to house oil-tight pushbuttons, switches, and pilot lights. These enclosures are primarily used in
M-2900A Tapchanger Control Cabinet
CONTROLS M-2900A Tapchanger Control Cabinet New installations or retrofit for Cooper, General Electric, Siemens and Howard regulators NEMA 3 rated enclosures available in the following construction materials:
Spec Tech Industrial Electric Control Enclosures
Control Enclosures N Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
Square-Duct Wireways. Catalog 5100CT0101R06/ Class CONTENTS Description... Page. Wireway Offerings... 3
Catalog 5100CT0101R06/11 2011 Class 5100 CONTENTS Description............................................. Page Wireway Offerings............................................ 3 General Purpose NEMA Type
Heavy-Duty Enclosures Type 12 Free Standing Disconnect with Sub Panel
eavy-uty Enclosures PPLICTIONS - esigned to provide protection for electrical instruments, terminals, and controls from dust, oil, dirt and dripping liquids. CONSTRUCTION - abricated from 10 gauge carbon
Free-Stand, Single or Dual Access, Type 12
Spec-00291 ree-stand Enclosures Type 12 ree-stand Enclosures ree-stand, Single or Dual Access, Type 12 INDUSTRY STANDARDS UL 508A Listed; Type 12; ile No. E61997 cul Listed per CSA C22.2 No. 94; Type 12;
Type 4 X Panel Enclosures
Ground-Mount s Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing out frames
Cable & Wire Management
able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...
Type 4X Panel Enclosures
Ground-Mount Enclosures Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing
EN4DSC Disconnect Enclosures - NEMA 4 ABB Controls, Allen Bradley, Cutler Hammer, General Electric, Siemens I-T-E Max-Flex, Square D
EN4DSC Disconnect Enclosures - NEMA 4 Application Designed to house the following safety disconnect equipment: ABB Controls flange mounted variable depth operating mechanisms for disconnect switches and
TYPE 1 SCREW COVER WIREWAY
TYPE 1 SCREW COVER WIREWAY Construction: C & I Enclosures Type 1 Screw Cover and Hinge Cover Wireway is fabricated in accordance with U.L. specifications from code gauge steel. Wireway is furnished standard
NEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series
NEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series Applications N412_CD Series Designed to house the following: AutomationDirect.com NEMA 1/12 Flexible shaft handle for Molded
Standard Product. Type 4 Free-Stand Enclosures and Accessories
763.422.2600 Spec-00294 F763.422.2211 Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand, Type 4 INDUSTRY STANDARDS
Standard Product Low Profile Type 12 One-Door Disconnect Enclosures
763.422.2600 Spec-00005 M763.422.2211 Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Low-Profile, One- to Five-Door
Wall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type 12
763.422.2600 SPEC-00245 L763.422.2211 DISCONNECT WALL-MOUNT PREFERRED-CUTOUT DISCONNECTS PREFERRED CUTOUT, DISCONNECTS, TYPE 12 Wall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type
NEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series
NEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series Applications SN4 Series Designed to house the following: Allen-Bradley Bulletin 1494V disconnect switches with flange-mounted variable
Type 4 X Panel Enclosures
Type 4 X Panel Enclosures JIC Enclosures Type 4X Continuous Hinge Cover ata Sheet Seamless, poured in-place gasket Type 4X Panel Enclosures Application Houses electrical controls and instruments Intended
Industrial Enclosures
www Eclipse Junior Series Single Door Enclosures - NEMA 12, 13, 4... 2 Series 2000, Single Door Enclosures - NEMA 12, 4... 40 1414 Series JIC Enclosures, Clamped, Lift Off Cover - NEMA 12, 13... 4 1414
Operator System Enclosures
27 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 Operator Systems are designed to house a wide variety of equipment; panel mount, rack mount, desktop PC s, monitors,
Technical Operating Information AC Unit (T150116G100) Replacement Filter No
763.422.2600 EC-00713 G763.422.2211 NETWORKING WALL-MOUNT CABINET ROTEK INGLE-DOOR AND DOUBLE-HINGED CABINET Wall-Mount Cabinets ROTEK ingle-door and Double-Hinged Cabinets ROTEK DOUBLE-HINGED, UL AND
Cable & Wire Management
Cable & ire Management ay-in ireway Data Sheet Cable & ire Management pplication ouses runs of control and power cable Protects against circulating dust, falling dirt and dripping noncorrosive liquids
Control Enclosures. Type 1, 3, 3R, 4X, 12 as designated. Type 1, 3, 3R, 4X, 12 as designated WT, HWT, FHLWT
Control Enclosures Stahlin s Control Enclosures are designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors where corrosion resistant watertight enclosures
INDUSTRIAL SOLUTIONS Wallmount Enclosures...pgs IND 1-46 Wireway/Trough...pgs IND Freestanding Enclosures...pgs IND FMD Enclosures...
INDUSTRIL SOLUTIONS Wallmount s...pgs IND 1-46 Wireway/Trough...pgs IND 47-60 Freestanding s...pgs IND 61-72 FMD s...pgs IND 73-86 Operator Interface...pgs IND 87-136 Noncorrosive...pgs IND 137-193 I N
Industrial Enclosures
1414 Series JIC Enclosures - NEMA 12, 13 Clamped, Lift Off Cover Application Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal
INDUSTRIAL ELECTRICAL AND EXPLOSIONPROOF ENCLOSURE SYSTEMS
ADALET A SCOTT FETZER COMPANY INDUSTRIAL ELECTRICAL AND EXPLOSIONPROOF ENCLOSURE SYSTEMS #NCAT01 REV. D FOR CENELEC APPROVED UNITS SEE PAGE 2 14562 Pg 00-00 12/2/00 12:36 PM Page 1 Designing Our Products
Wedge Consoles Joining Kit Full Back Panel Side-Mount Panel Caster Kit Bulletin: P11. E mm/in
Spec-01204 OLI old Series esk Consoles esk Consoles and Accessories old Series esk Console, Type 12 ALICATIO The OLI old Series esk Console provides an ideal surface for mounting MI controls such as keyboards,
ACCESSORIES Electric Heater Compact Cooling Fans Floor Stand Kit PANELITE Enclosure Lights BULLETIN: A28SX
763.422.26 SPEC-177 B763.422.2211 DISCONNECT SEQUESTR PREFERRED-CUTOUT DISCONNECTS SEQUESTR EXTERNAL DISCONNECTS SEQUESTR PrefERREd-CutoUT DisconnECTS SEQUESTR ExTERnal Disconnects STAINLESS STEEL SEQUESTR
Preferred Cutout, Disconnect Enclosure, Type 12
763.422.2600 Spec-00245 J763.422.2211 Wall-Mount Preferred-Cutout s Preferred Cutout, s, Type 12 Wall-Mount Preferred-Cutout s Preferred Cutout, s, Type 12 Preferred Cutout, Enclosure, Type 12 INDUSTRY
Rack Mount devices shown not included Custom cabinet shown
763.422.2588 SPEC-00215 M763.422.2661 NETWORKING OUTSIDE PLANT PRODUCTS COMLINE OSP WALL-MOUNT CABINET PACKAGE AND ACCESSORIES Outside Plant Products COMLINE OSP Wall-Mount Cabinet Package and Accessories
TABLE OF CONTENTS. Manufacturers of Quality Electrical Enclosures. Page: Page:
TABLE OF CONTENTS Page: Access Doors. 9 Aluminum (NEMA 4X) 48 Bussed Current Transformer Cabinets... 7 Current Transformer Cabinets 7 Dividers (Cabinet & Wireway).. 50 Flush Covers (for Screw Cover Boxes).
Industrial Enclosures
1414 N4 Series JIC Enclosures - NEMA 12, 13, 4 Clamped, Lift Off Cover Industrial Enclosures Application Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical
Networking: Wall-Mount Cabinets PROTEK Wall-Mount and Double-Hinge Cabinets PROTEK Single-Door Fan and Filter Thermal Packages, UL and NEMA Type 1
PROTEK Single-Door Fan and Filter Thermal Packages, UL and NEMA Type 1 Industry Standards UL 508A Listed; Type 1; File Number E619967 cul Listed per CSA C22.2 No. 9; Type 1; File Number E61997 NEMA / EEMAC:
CT Metering. CT Metering. Meter Mounting Equipment
Single Meter Sockets, Without Bypass - CT Rated.................................. 67-68 Single Meter Sockets, CT Rated With Test Switch Bypass Provision............. 69-70 Meter Socket / Enclosure Combination
RMR Floor-Mount Enclosures
Protecting your technology investment. RMR Floor-Mount Enclosures provide NEMA Type 4 and 12 protection for large electronic components and controls that require sturdy mounting. Floor stands elevate the
RMR Standard Wall-Mount Enclosures
Protecting your technology investment. RMR Standard Wall-Mount Enclosures provide NEMA Type 4 and 12 protection for smaller electronic components and controls that require sturdy wall mounting. ADVANTAGES
Commercial Boxes and Enclosures COM-24 COM-66
and Count on Hoffman to provide you with off-the-shelf innovation features to save you time and money. Perforated panels make component layout and mounting fast, easy, and flexible. Integral wood panels
ClimateCab Cabinets and Accessories
Product Data Sheet ClimateCab Cabinets and Accessories» Free-standing ClimateCabs include a NEMA 12 Cabinet with M6 or tapped rails, plus a 5000-, 8000-, or 12,000-BTU digitally controlled air-conditioning
Industrial Enclosures
48J Series - NEMA 2 Large JIC Enclosures Junction Boxes Application Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments. Provides a degree of protection from falling
APX Technologies, lnc.
APX Technologies, lnc. EXCELLENCE IN PROTECTION 200 Oregon Street, Mercersburg, PA 17236 Tel. 717-328-9399 Fax.717-328-2447 www.apx-technologies.com 17.63 48.75 112.50 8.50 20.00 6.75 5.00 5.00 7.12 BATTERY
EQUIPMENT PROTECTION
Contractor Specifier s Guide EQUIPMENT PROTECTION WWW.PENTAIRPROTECT.COM/HOFFMAN Volume 8 Hoffman Has You Covered From utility junctions to protecting relays, contactors and wire, Hoffman has you covered.
Swing Handles & Latches
ov-swing-handles-&-paddle-latches-divider - Updated - 12-01-2017 w Swing Handles - Cam Control Swing Handles - Rod Control Flush T-handle Latches Paddle Latches Swing Handles & Latches 30 Swing Handles
ELECTRICAL ENCLOSURES AND MODULAR CABINETS EXM MANUFACTURING LTD. Since 1975
www.exmweb.com ELECTRICAL ENCLOSURES AND MODULAR CABINETS 19 EXM MANUFACTURING LTD. Since 1975 NEMA 12-13 SAFETY DISCONNECT 9500 UxD Right flange mounted disconnect multi-door enclosure The 9500 UxD oil
Cable & Wire Management
Type 1 Screw over... 8-14 Type 1 Quick-onnect inge over... 15-20 Type 3R nviroshield... 21-24 Type 12... 25-31 eed-through Wireway Type 12... 32-35 eed-through Wireway Type 4X... 36-39 Wiring Trough Type
RMR Free-Standing Enclosures
Protecting your technology investment. RMR Free-Standing Enclosures provide NEMA Type 4 and 12 protection for large electronic components and controls that require sturdy mounting. ADVANTAGES Advanced
PH (763) FX (763) hoffmanonline.com
PH (763) 422-2211 FX (763) 422-2600 : 1 ContractorType 1 Chapter Contents Screw-Cover Type 1 Pull Boxes and Accessories Screw-Cover, Type 1............................................... 3 Type 1 Pull
Phone: Fax: Web: -
empire SERIES For your largest applications, turn to the Empire Series from Allied Moulded. Fiberglass construction offers durability and strength without the excessive weight of a comparable metal enclosure.
CONCEPT Wall-Mount Enclosure Accessories
CONCEPT Wall-Mount Enclosure Accessories The CONCEPT Enclosure Group Accessory Selection Guide Steel section 4 or Stainless Steel Enclosures section 6 Steel section 4 or Stainless Steel Window-Door Enclosures
Chapter Contents. Outside Plant Products
PH FX (763) 422-2588 422-2661 : Chapter Contents Outside Plant Products COMLINE Wall-Mount Enclosures and Accessories COMLINE, Type 4X................................................ 2 Mounting Panel...................................................
Introduction. Features. Intelligent Technologies Motor Control Center Structures
Intelligent Technologies Technical Data New Information Description Page Intelligent Technologies General............................................. 2 s.......................................................
Wall-Mount Enclosures
Wall-Mount Enclosures Protection When Safety Matters Most When selecting an enclosure, application can be associated with market or product. For example, is your enclosure going to be used in a petrochemical
Steel Enclosures Contents
Contents 12/001 - Type S1GK and GK/SD steel enclosures for industrial control use Type CS and GKP steel enclosures for standard starters Page 12/002 12/002 Type S3GK and GK/DW weatherproof steel enclosures
The TeleControl Series Technical Drawings
The TeleControl Series Technical Drawings TeleControl TeleControl Enclosures Dimensions SIZE ID NUMBER OVERALL H X W X D INSIDE A X B X C E X F J K L M N HOLE DIA. SHIPPING WEIGHT PANEL NUMBER J1407TC
FREE-STANDING ENCLOSURE ACCESSORIES FREE-STANDING ENCLOSURE ACCESSORIES. Swing-Out Panels. Panels (Full & Half Length) For Single-Door Enclosures
118 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 11 ENCLOSURE Panels (Full & Half Length) For Single-Door Enclosures Panels for single-door enclosures can
CHAPTER4 Wall-Mount Cabinets
: CHAPTER Wall-Mount Cabinets Protect your electronics investment with space-saving solutions from Pentair Technical Products Hoffman brand. In schools, factories, retail outlets and government centers
SERIES 14 SINGLE DOOR CONSOLES TECHNICAL DATA
Operator System Enclosures 1 12 SAGINAW CONTROL ENGINEERING STOCK PRICE LIST SAGINAW CONTROL ENGINEERING STOCK PRICE LIST 13 Series 1 Single Door Consoles Application - Designed for electronic controls
4412HS Wway 4X4X12 N1 HC Lay-In. Features. Material, Color, and Finish. Dimensions and Weight. Long Description. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 ax: 936-560-4685 4412S Wway 4X4X12 N1 Lay-In ooper -Line/able Tray atalog Number Manufacturer Description Weight per unit Product ategory
Server & Network Enclosures RS Enclosure
RS Enclosure Electronic Enclosures & Cabinets Eaton offers a comprehensive line of standard and custom server and network including both freestanding and wall-mountable styles, as well as a complete selection
TERMINATION ENCLOSURE OPTIONS
TERMINATION ENCLOSURE OPTIONS Add suffix: R - Reverse Stagger the Bus Bars (to run cable in from the top) CU - Copper NEMA Mount Bus Bars C - Plastisol Covers for Bus Bars DF - Dead Fronts T - Tin Plated
*Discover our other ranges: Select your range of Spacial steel wall-mounting enclosures. Spacial S3DC. Spacial S3X page 5/4. Thalassa PLM page 6/12.
Spacial SDC Select your range of Spacial steel wall-mounting enclosures SDC You need an efficient, sealed multipurpose and aesthetic enclosure for an indoor industrial facility. Our solution: the Spacial
Applications. Illustrated Features
Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing
ENCLOSURE SOLUTIONS FOR INDUSTRIAL APPLICATIONS STAINLESS STEEL & NON-METALLIC ENCLOSURES
ENCLOSURE SOLUTIONS FOR INDUSTRIAL APPLICATIONS STAINLESS STEEL & NONMETALLIC Over 5 years of proven innovation For more than 5 years Adalet, a Scott Fetzer Company, has been an industry leader in the
Modular Enclosure Solutions Specifier s Guide
Modular Enclosure Solutions Specifier s Guide EQUIPMENT PROTECTION WWW.PENTAIRPROTECT.COM/HOFFMAN Volume 1 The Next Generation Modular Enclosure Stronger. Faster. Easier. You ve already spent tens of thousands
1.6 Accessories include tool-free snap-in technology options for air flow, cable management, shelves, power distribution units, etc.
Rittal TS IT Rack Guide Specifications TS IT network server enclosure 1.0 General Description 1.1 Modular Free Standing Equipment Cabinet 1.2 Various combinations of dimensions: 1.2.1 Height: 48 /1200mm,
Polyline Polycarbonate Enclosures
TM Polyline Polycarbonate Enclosures Authorized Distributor: From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications WESCHLER INSTRUMENTS 800-903-9870
Hazardous Location Enclosures INDEX. Hazardous Location Enclosures HAZ-2
Hoffman s new ZonEX ATEX-certified enclosures can be used in Zone 1- and Zone 2-rated applications throughout the world. Our NEMA Type 9 enclosures are designed for use in Class II Division 1 and 2 locations
JB & WM Specification Guide
JB & M Specification Guide Y COOSE RITTAL? Rittal understands the challenges faced every day by our customers as they strive to find solutions to their unique application requirements that aren t just
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
Specification Pad-Mounted Capacitor Bank with Dual Fusing Integral Load-Interrupter on Line-Side Fuse Mountings
Page 1 Specification Pad-Mounted Capacitor Bank with Dual Fusing Integral Load-Interrupter on Line-Side Fuse Mountings I. General This specification covers the design requirements for a pad-mounted capacitor
DISTRIBUTION EQUIPMENT: NEC/CEC HAZARDOUS LOCATION SWITCHES. Application
- and 3-Pole, Non-Interchangeable Trip. Bolted Enclosure Type. Class I, Division 1 and, Groups B, C, D Class II, Division 1 and, Groups E, F, G Application Explosionproof circuit breaker enclosures are
NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION CIRCUIT BREAKERS. Application
- and 3-Pole, Non-Interchangeable Trip. Bolted Enclosure Type. Class I, Division 1 and, Groups B, C, D Class II, Division 1 and, Groups E, F, G Distribution Equipment NEC/CEC CLASS/ZONE RATED HAZARDOUS
CUSTOM ENCLOSURE CUTOUTS
www.factorymation.com/enclosures ENCLOSURES 147 WWW.FACTORYMATION.COM/ENCLO- CUSTOM ENCLOSURE CUTOUTS We ll cut the holes to your specifications so the enclosure arrives... READY FOR YOUR ASSEMBLY! Enclosure
Door available front and rear
Features - The range consists of nine cabinets, ranging from 20" x 30" to 50" x 40". - Cabinet is self-extinguishing, hot molded halogen-free fiberglass reinforced polyester. - Gray dyed in mass (RAL 7036)
TAG-DR Series. Indoor or Outdoor LED Driver Box - TAG LED Flood Solutions. Specifications. Overall Dimensions For Reference Only TAG-DR
Catalog Number: Approvals: TAG-DR Series Box Driver Voltage Options Finish Type Wattage Date: Page 1 of 6 Overall Dimensions For Reference Only TAG-DR * Indoor Box 3.1" (7.8 cm) 9.1" (23.1 cm) 8.9 (22.7
Smart controls Reliable operation User friendly design Plug and play operation
Series H2-ID1 RAINSETS Series H2-ID1 Rainsets manage the distribution and water treatment functions of commercial rainwater system installations. The modular H2-ID1 series is designed for indoor installations
Product Datasheet. 2. GRP large rain canopy. 3. GRP door. 4. G.I Mounting plate. 5. G.I Gland plate. 6. EPDM rubber gasket
POLYESTER ENCLOSURE SINGLE DOOR Product Datasheet GRP Single Door Enclosures are used for outdoor application with weatherproof and antistatic properties, finding their major application in the protection
ACCESSPLUS II Double-Hinge, Type 1
II Double-Hinge, Type 1 Industry Standards UL 508A; Type 1; File No. E61997 cul Listed per CSA C22.2 No. 182.; File No. E23087 EIA 310-D NEMA/EEMAC Type 1 EIC 60529 IP20 Per BICSI TDMM Tenth edition, Chapter
[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]
![[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]](/thumbs/95/124192199.jpg "[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]")
[ SOLUTIONS FOR AUTOMATION & ONTROL DEVIES: ] INDUSTRY STANDARDS Solid hinged cover models. Mounting brackets required to meet UL/SA external mounting requirements. FEATURES remove and -install hinge pins
MP Meter-Pak Meter Centers Product Description PRODUCT DESCRIPTION. MP Meter-Pak Meter Centers
Product Description PRODUCT DESCRIPTION MPH66125 with Horn Bypass Square D brand MP Meter-Pak meter centers from Schneider Electric offer a wide range of solutions for multi-metering applications: UL Listed
Design Standard. Purpose: Design Standard:
Design Standard Purpose: This design standard has the purpose of creating a consistent application of motor-control centers throughout the East Side Union High School District, therefore achieving a standard
SECTION SECTION. EATON 2014 Arrow Hart Buyers Guide
F SECTION SECTION 1 EATON 2014 Arrow Hart Buyers Guide FSECTION Cam-lok Single Pole Connectivity Table of contents Product selector guide F-3 NEMA rating system F-4 F-series F-5 E1010 F-6 E1012 F-7 F-series
Wall-Mount Cabinets ACCESSPLUS II Double-Hinge
763.422.2588 SPEC-00534 G763.422.2661 NETWORKING WALL-MOUNT CABINETS ACCESSPLUS II DOUBLE-HINGE Wall-Mount Cabinets ACCESSPLUS II Double-Hinge ACCESSPLUS II DOUBLE-HINGE, TYPE 1 INDUSTRY STANDARDS UL 508A;
Continuous Hinge Clamped Cover Enclosures JN4XHSS Series Stainless Steel Enclosures
JIC Continuous Hinge Clamped Cover Enclosures JN4XHSS Series Enclosures Standard Features panel sold separately) Cover is attached with a continuous stainless steel piano hinge. Design Options Type 304
The DiamondShield Series DS
The DS The was developed for design flexibility and pleasing aesthetics. Applications include high-end electronics, harsh corrosive environments, and industrial applications both indoors and out. Unique
CLIMAGUARD Outdoor Heat Exchangers
Product Overview : CLIMAGUARD Outdoor Heat Exchangers TX23 Model TX38 Model TX52 Model 132 Product Overview : Lab- and field-tested to seal out extreme weather CLIMAGUARD Outdoor Heat Exchangers PRODUCT
Rittal WM Selection Guide. Carbon & Stainless Steel, Disconnect, Slope Top
Rittal M Selection Guide Carbon & Stainless Steel, isconnect, Slope Top Rittal allmounts M Enclosures Efficient esign, Versatility Rittal s M enclosure sets the standard for maximum use of space and ease
tot (Ibs.) Number ** U7310-RL U7310-RL-TG i :;:r"0? 10:5 S3» ilm; ,
' Stock ',,' ' ' ' *t *«W'-' tt M.. '. #*. ;, '. ''"' f* " ' '-', *