Klippon TBi FS Fixing Screw
|
|
- Jane Fowler
- 5 years ago
- Views:
Transcription
1 Klippon Ti S - ixing Screw Klippon Ti S ixing Screw Stainless steel enclosures for use within harsh industrial environments ven under moderate environmental conditions, there is an increasing need for complex, individual automated solutions. harsh industrial environment places additional, heavy demands on applications and determines the design of the industrial enclosures to meet these demands. With complete protection and excellent durability, our Klippon Ti stainless steel enclosures offer the best protection for the components inside them. Its electro-polished surface makes the enclosure extraordinarily resistant to corrosion. vailable in 11 sizes and 2 depths Operating temperature range -40 to +85 Impact resistance of 10 J Industrial application edicated internal mounting support bracket for fixing terminal rail or mounting plates with self forming screws xternal earth point suitable for M6 threaded screw oncealed hinges Internal earth stud M6 screw fitted to enclosure lid and base Supplied in 0 or 1 gland plate version irect mounting of the enclosure by means of rear mounting holes Mounting feet in stainless steel are optionally available, can be rotated by 90 Moisture and dust channel ouble-bit locking system Our assembly service can supply these enclosure preassembled with terminals and cable glands according to customer requirements. \ NW Overview of enclosures escription Height x width x depth in mm 0 Gland Plate 1 Gland Plate (below) KTi S 3020 S2_* x 200 x KTi S 3030 S2_* x x KTi S S2_* x x KTi S 4030 S2_* 400 x x KTi S S2_* 400 x x KTi S S2_* 400 x 400 x KTi S S2_* 500 x 400 x KTi S S2_* 500 x 500 x KTi S S2_* 600 x 400 x KTi S S2_* 600 x 600 x KTi S S2_* 800 x 600 x *Placeholder for the number of gland plates (0 or 1).104
2 Klippon Ti S - ixing Screw Technical Overview eatures vailable in 11 sizes and 2 standard depths Welded mounting bracket for securing the mounting plate or mounting rail by means of self-tapping screws xternal earth - M6 earth tab rivet M6 earthing bolt welded in the cover and base of the enclosure vailable with 0 or 1 flange plates Optimised laser welding, high quality standard irect mounting of the enclosures with rear mounting holes Mounting feet in stainless steel are optionally available, and can be rotated by 90 Permanent labelling of items Packaging optimally designed for enclosure Technical data Material (304) 1.5 mm Surface lectroplished IP protection class IP 66 NM Rating 3, 4x, 5 Gland plates 1.5 mm thick stainless steel (304) flange plates, mounted with M6 screws, spanner size 10 mm arthing inside Welded-on M6 stainless-steel earth stud in enclosure lid and base arthing outside M6 earth tab rivet Installation mounting Welded mounting bracket for flexible mounting of the mounting plate, rails or TS 20 rails. They contain 4.51 mm drill holes for accommodating the mounting plate or TS/TS by means of self-tapping screws () nclosure attachment irect mounting (11 mm mounting holes on rear wall) or via mounting feet (optionally available), adjustable by 90 Lid opening ully removable lid Lid fixing M6 hexagon head slotted screws SW10 without hinge Impact resistance 10J Gasket material Neoprene - R Operating temperature range Tightening torque screws of lid and gland plates* 2.5 Nm *Please use our hexagon screwdriver with 10 mm size ( ) pprovals for empty enclosures IN N Germanischer Lloyd culus mpty enclosure standard HH
3 .106
4 Klippon Ti S - ixing Screw Klippon Ti S 3020 epth 0 mm Height/Width/epth 304, electropolished ccessories / 200 / 0 mm 0 gland plate gland plate - bottom side () vertical horizontal 2.5 mm² 1x36 3x17 4 mm² 1x30 3x14 6 mm² 1x23 3x11 10 mm² 1x18 3x9 16 mm² 1x 3x7 35 mm² 1x11 3x5 TS 35 mounting rail (screw terminal) WU / (tension clamp terminal) ZU / (tension clamp terminal) PU TS 32 mounting rail (screw terminal) SK TS mounting rail (screw terminal) KZ / / M 14 M16 7 M20 6 M25 3 M32 2 M40 2 M50 1 M63 M75.107
5 Klippon Ti S - ixing Screw Klippon Ti S 3030 epth 0 mm Height/Width/epth 304, electropolished ccessories / / 0 mm 0 gland plate gland plate - bottom side () vertical horizontal 2.5 mm² 3x36 3x36 4 mm² 3x30 3x30 6 mm² 3x23 3x23 10 mm² 3x18 3x18 16 mm² 3x 3x 35 mm² 3x11 3x11 TS 35 mounting rail (screw terminal) WU / (tension clamp terminal) ZU / (tension clamp terminal) PU TS 32 mounting rail (screw terminal) SK TS mounting rail (screw terminal) KZ / / M 23 M16 13 M20 11 M25 5 M32 4 M40 3 M50 3 M63 M75.108
6 Klippon Ti S - ixing Screw Klippon Ti S epth 220 mm Height/Width/epth 304, electropolished ccessories / / 220 mm 0 gland plate gland plate - bottom side () vertical horizontal 2.5 mm² 3x36 3x36 4 mm² 3x30 3x30 6 mm² 3x23 3x23 10 mm² 3x18 3x18 16 mm² 3x 3x 35 mm² 3x11 3x11 TS 35 mounting rail (screw terminal) WU / (tension clamp terminal) ZU / (tension clamp terminal) PU TS 32 mounting rail (screw terminal) SK TS mounting rail (screw terminal) KZ / / M 38 M16 26 M20 22 M25 14 M32 7 M40 6 M50 3 M63 2 M
7 Klippon Ti S - ixing Screw Klippon Ti S 4030 epth 0 mm Height/Width/epth 304, electropolished ccessories 400 / / 0 mm 0 gland plate gland plate - bottom side () vertical horizontal 2.5 mm² 3x56 4x36 4 mm² 3x47 4x30 6 mm² 3x35 4x23 10 mm² 3x28 4x18 16 mm² 3x23 4x 35 mm² 3x18 4x11 TS 35 mounting rail (screw terminal) WU / (tension clamp terminal) ZU / (tension clamp terminal) PU TS 32 mounting rail (screw terminal) SK TS mounting rail (screw terminal) KZ / / M 23 M16 13 M20 11 M25 5 M32 4 M40 3 M50 3 M63 M75.110
8 Klippon Ti S - ixing Screw Klippon Ti S epth 220 mm Height/Width/epth 304, electropolished ccessories 400 / / 220 mm 0 gland plate gland plate - bottom side () vertical horizontal 2.5 mm² 3x56 4x36 4 mm² 3x47 4x30 6 mm² 3x35 4x23 10 mm² 3x28 4x18 16 mm² 3x23 4x 35 mm² 3x18 4x11 TS 35 mounting rail (screw terminal) WU / (tension clamp terminal) ZU / (tension clamp terminal) PU TS 32 mounting rail (screw terminal) SK TS mounting rail (screw terminal) KZ / / M 38 M16 26 M20 22 M25 14 M32 7 M40 6 M50 3 M63 2 M
9 Klippon Ti S - ixing Screw Klippon Ti S epth 220 mm Height/Width/epth 304, electropolished ccessories 400 / 400 / 220 mm 0 gland plate gland plate - bottom side () vertical horizontal 2.5 mm² 4x56 4x56 4 mm² 4x47 4x47 6 mm² 4x35 4x35 10 mm² 4x28 4x28 16 mm² 4x23 4x23 35 mm² 4x18 4x18 TS 35 mounting rail (screw terminal) WU / (tension clamp terminal) ZU / (tension clamp terminal) PU TS 32 mounting rail (screw terminal) SK TS mounting rail (screw terminal) KZ / / M 53 M16 36 M20 30 M25 20 M32 11 M40 9 M50 4 M63 3 M75 3.1
10 Klippon Ti S - ixing Screw Klippon Ti S epth 220 mm Height/Width/epth 304, electropolished ccessories 500 / 400 / 220 mm 0 gland plate gland plate - bottom side () vertical horizontal 2.5 mm² 4x75 6x56 4 mm² 4x63 6x47 6 mm² 4x47 6x35 10 mm² 4x38 6x28 16 mm² 4x32 6x23 35 mm² 4x24 6x18 TS 35 mounting rail (screw terminal) WU / (tension clamp terminal) ZU / (tension clamp terminal) PU TS 32 mounting rail (screw terminal) SK TS mounting rail (screw terminal) KZ / / M 53 M16 36 M20 30 M25 20 M32 11 M40 9 M50 4 M63 3 M
11 Klippon Ti S - ixing Screw Klippon Ti S epth 220 mm Height/Width/epth 304, electropolished ccessories 500 / 500 / 220 mm 0 gland plate gland plate - bottom side () vertical horizontal 2.5 mm² 6x75 6x75 4 mm² 6x63 6x63 6 mm² 6x47 6x47 10 mm² 6x38 6x38 16 mm² 6x32 6x32 35 mm² 6x24 6x24 TS 35 mounting rail (screw terminal) WU / (tension clamp terminal) ZU / (tension clamp terminal) PU TS 32 mounting rail (screw terminal) SK TS mounting rail (screw terminal) KZ / / M 70 M16 46 M20 40 M25 26 M32 14 M40 M50 5 M63 4 M
12 Klippon Ti S - ixing Screw Klippon Ti S epth 220 mm Height/Width/epth 304, electropolished ccessories 600 / 400 / 220 mm 0 gland plate gland plate - bottom side () vertical horizontal 2.5 mm² 4x94 8x56 4 mm² 4x79 8x47 6 mm² 4x60 8x35 10 mm² 4x48 8x28 16 mm² 4x40 8x23 35 mm² 4x30 8x18 TS 35 mounting rail (screw terminal) WU / (tension clamp terminal) ZU / (tension clamp terminal) PU TS 32 mounting rail (screw terminal) SK TS mounting rail (screw terminal) KZ / / M 53 M16 36 M20 30 M25 20 M32 11 M40 9 M50 4 M63 3 M75 3.1
13 Klippon Ti S - ixing Screw Klippon Ti S epth 220 mm Height/Width/epth 304, electropolished ccessories 600 / 600 / 220 mm 0 gland plate gland plate - bottom side () vertical horizontal 2.5 mm² 8x94 8x94 4 mm² 8x79 8x79 6 mm² 8x60 8x60 10 mm² 8x48 8x48 16 mm² 8x40 8x40 35 mm² 8x30 8x30 TS 35 mounting rail (screw terminal) WU / (tension clamp terminal) ZU / (tension clamp terminal) PU TS 32 mounting rail (screw terminal) SK TS mounting rail (screw terminal) KZ / / M 85 M16 58 M20 50 M25 32 M32 17 M40 14 M50 6 M63 5 M
14 Klippon Ti S - ixing Screw Klippon Ti S epth 220 mm Height/Width/epth 304, electropolished ccessories 800 / 600 / 220 mm 0 gland plate gland plate - bottom side () vertical horizontal 2.5 mm² 8x133 11x94 4 mm² 8x111 11x79 6 mm² 8x84 11x60 10 mm² 8x67 11x48 16 mm² 8x56 11x40 35 mm² 8x42 11x30 TS 35 mounting rail (screw terminal) WU / (tension clamp terminal) ZU / (tension clamp terminal) PU TS 32 mounting rail (screw terminal) SK TS mounting rail (screw terminal) KZ / / M 85 M16 58 M20 50 M25 32 M32 17 M40 14 M50 6 M63 5 M
T ~ \ u " NEW. Data sheet Enclosures. Klippon STB Stainless Steel Enclosures
ata sheet nclosures Klippon S Stainless Steel nclosures NW ~ \ u " For many decades the name Klippon has been synonymous for competence and quality in our proven supply of enclosures and customer solutions
More informationNexT Range Large sheet steel enclosures
Large sheet steel enclosures 8 Large sheet steel enclosures The NexT Range is the optimum choice for particularly harsh environments. The stainless steel design of the NexT Range can face up to the toughest
More informationFeatures EN/IEC Applications
PO Modular polyester boxes nsulated boxes Standards eatures ntro N/ 639- N/ 6059 N/ 608 pprovals - oxes with polyester cover: types 3, 3R,,, 6, 6P, and 3 - oxes with polycarbonate cover: types 3, 3R,,,
More informationThe Ex-Cell-I series is made for instrumentation with easy access central locking system and hinged cover.
E X - T E R M I N A L E N C L O S U R E S Stainless Steel Version for Zone and Zone 2 The enclosure range is an ATEX certified enclosure / termination solution for category 2 (Zone) application with an
More informationI Ex-e/Ex-i terminal box I
ID TAG label & bracket Door document holder opti. Security padlock Hasp opti. Technical data Marking accd. to 94/9/EC II G Ex e II / II D Ex td A1 IP66 Temperature class T6 up to +40 C / T5 up to +55 C
More informationEExe and EExi terminal boxes in polyester and aluminium for Ex areas
EExe and EExi terminal boxes in polyester and aluminium for Ex areas All BERNSTEIN polyester and aluminium enclosures are available in EExe and EExi versions T II 2 G EEx e II T6 or EEx e ia IIC T6 or
More informationPolySafe. Insulated wall mounting cabinets. Intro. Multipurpose polyester cabinets. Features. Standards. Approvals. Ambient conditions B.
Multipurpose polyester cabinets Standards eatures N/ 60529 N/ 61439-2 N/ 62208 N/ 62262 pprovals - abinets with one door: type 3, 3R, 3S, 4, 4, 12, 12K and 13 - abinets with two doors: type 3, 3R, 3S,
More informationPolyester enclosures CP series
Polyester enclosures CP series BERNSTEIN polyester enclosures from the CP and CPS series are made of high-quality glass-fibre reinforced polyester. The reduced surface resistance (RO
More informationDisconnect Enclosures
Type 12 Heavy-Duty Single & Multi-Door Data Sheet pplication Houses electrical controls and equipment Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508
More informationEuromas Aluminium / Euromas F05
uromas luminium / uromas F05 Detailed product information can be found on www.bopla.de 368-43 sizes - Listing under UL file no. 16 706 - Versions with silicone lid seal with higher temperature resistance
More informationCONTENTS INTRODUCTION. Company Profile QUALITY CERTIFICATE EN ISO 9001: NEXT - Steel Enclosure Range. Product specification.
CONTENTS INTRODUCTION Company Profile QUALITY CERTIFICATE EN ISO 9001: 2000. NEXT - Steel Enclosure Range Product specification. Product technical parameters. General arrangement drawing. Ex-Cell - Steel
More informationType 4X Panel Enclosures
Ground-Mount Enclosures Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing
More informationstainless steel Cover hinge The cover hinge is simply screwed to the box protection channel and to the edge fold. Model No. KL
aus HB, S. 46 The Rittal range of terminal boxes offers 44 practical designs, developed and improved in constant dialogue with users. Whether with or without gland plates, in stainless steel, EMC version
More informationType 4 Panel Enclosures
Ground-Mount Enclosures Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish pplication Houses electrical controls and instruments Easy access panels or
More informationCatalog / 2016 North American Edition
Catalog 34 2015 / 2016 North American Edition without knockouts without knockouts without knockouts without knockouts PK Polycarbonate Housing Height inches (mm) Packs of 4.3 (110) 4.3 (110) 4.3 (110)
More informationtechnical datasheet technical datasheet Process JBs process junction boxes for fieldbus installations
technical datasheet technical datasheet Process JBs process junction boxes for fieldbus installations asy to install & maintain Standard proven designs reduce project costs Superb corrosion resistance
More informationAluform. Standard Industrial Enclosure. For Finishing Services, Product Support, or to Order. Call
luform Standard Industrial Enclosure For Finishing Services, Product Support, or to Order all 1-301-696-9800 Rose Enclosures 7330 Executive Way Frederick, 1704 301-696-9800 www.rose-opla.com E-mail: Rinfo@pm-usa.com
More informationIP54 Floor Standing & Wall Mounted Cabinets
IP54 Floor Standing & Wall Mounted Cabinets Our IP54 Style cabinets are designed to be used in areas of high dust levels and damp environments. They are available in 12U, 27U & 42U in widths/depths of
More informationGeneral Purpose Enclosures. Universal NI - Zinc Coated Steel General Purpose Enclosure - IP66. Index
General Purpose Enclosures Universal NI - Zinc Coated General Purpose Enclosure - IP66 Index Dimension Sheet Dimension Sheet Viewing Window Information Leafl et Web Links Universal NI Information Page
More informationHinges. Concealed hinges. Concealed hinge 90 opening
oncealed hinges oncealed hinge 90 opening Pins and links in 430 stainless steel Mounting features: - For nested doors or surface mounted doors. - LH or RH options. - For horizontal or vertical applications.
More informationGeneral Purpose Enclosures. Universal NI Stainless Steel General Purpose Enclosure - IP66. Index
General Purpose Enclosures Universal NI - 316 Stainless Steel General Purpose Enclosure - IP66 Index Dimension Sheet Dimension Sheet Viewing Window Information Leafl et Web Links Universal NI SS Information
More informationGlass Reinforced Polyester Enclosures
42 The GRP range comprises 16 sizes of enclosure manufactured in glass reinforced polyester (GRP). This material is highly resistant to contamination from oils, fats, aliphatic and aromatic carbohydrates,
More informationPolycarbonate Watertight 03 Product Drawings Last Updated 6/18/2008
ROSE+BOPL PHOENIX MECNO COMPNY Polycarbonate Watertight 03 Product Drawings Last Updated 6/18/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 301-696-9800 www.rose-bopla.com rbinfo@pm-usa.com
More informationNXT Series Enclosures
AEx Class I, Zone 1, AEx e IIC, T6 Features/Applications: The NXT series of enclosures available in two types of material finish have been designed to accommodate rail mounted terminals or other electrical
More informationType 12 / 13 Enclosures
Type 12 Free-Standing Enclosures ata Sheet pplication Houses electrical controls and instruments Easy access fixed or swing panels for optional equipment ual-access construction available for back-to-back
More informationNumber of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures
us enclosures G. us enclosures Enclosure:.38 Door:.5 IP 65 to EN 60 59/09.00, complies with NEMA. Door with l/h hinge, cam lock with double-bit insert, () support rail(s) S 35/7.5 (for G 586.). Drilled
More informationRittal CM Compact System Enclosures
Rittal CM Compact System Enclosures Compact class = Top class: Infinite possibilities R Compact enclosure on the outside, Top enclosure on the inside! Index Convincing details... 3 5 Compact system enclosures
More informationSTX stainless steel boxes
STX stainless steel boxes Enclosure and door manufactured from AISI 304 stainless steel (AISI 316 on request). Mounting plate manufactured from 2.5mm sendzimir sheet steel. Hinge in stainless steel. Box
More informationH15P. Toyota Hilux A-DECK Dual Cab
Toyota Hilux A-DECK Dual Cab Page 1 of 14 Fitting Instructions Part Number H15 Toyota Hilux A-DECK Dual Cab 2015+ To suit Sports Bars Check contents of kit before commencing fitment and report any discrepancies
More informationIndustrial Enclosures
Industrial Enclosures Small enclosures from page 08 Polycarbonate enclosures PK... 0 Cast aluminium enclosures GA... 4 Terminal boxes KL... 6 E-ox E... 9 us enclosures G... 0 RiLAN Industrial IN... 4 Compact
More informationThe Weidmüller Catalogue System Industry 2002
The Weidmüller Catalogue System Industry 2002 1 5 Sectional catalogue 1: Terminals 2002 W-Series Z-Series IDC-Series SAK-Series Ex Terminals - ATEX Terminals in power supply applications KLBÜ shield connection
More informationProduct Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationProduct Diversity Knowledge Transfer MPS Expertise Globalization Integrative Thinking Product Information System Enclosure Ripac Vario-Module
Product Diversity Knowledge Transfer MPS Expertise Globalization Integrative Thinking Product Information System Enclosure Ripac Vario-Module May be used as an instrument case or rack-mounted enclosure
More informationIP65/IP66 ABS/Polycarbonate Screw Lid Boxes
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes p Versatile, lightweight & durable p Choice of materials: polycarbonate for rugged applications or ABS as an economic alternative p IP protection for outdoor
More informationTechnical data. Material e-reinforced polyester in grey or black. Seal Neoprene (CR) round cord (siliconized)
BERNSTEIN Series CP and CPS polyester enclosures are produced from highgrade e-reinforced polyester. Thanks to their reduced surface resistance (Ro < 109 Ohm), the black polyester enclosures meet the requirements
More informationCompact enclosures AE
Compact enclosures AE Material: 1.4301 (AISI 304) Mounting plate: Sheet steel Cam lock: Die-cast zinc, nickel-plated Surface finish: Brushed, grain 40 Mounting plate: Zinc-plated Protection category: IP
More informationPolycarbonate and ABS enclosures with quick release lid screws CT series
Polycarbonate and s with quick release lid screws CT series The CT series of BERNSTEIN plastic enclosures are made from high-quality Polycarbonate or ABS. They are especially suitable for encapsulating
More informationENCLOSURES & PANELS. The Trusted Source for Innovative Control Solutions
ENCLOSURES & PANELS The Trusted Source for Innovative Control Solutions 1-717-767-6511 999 This page intentionally left blank. 1000 www.redlion.net MODEL ENC13 - NEMA 4 ENCLOSURES FOR CUB7 This enclosure
More informationModular Enclosure Solutions Specifier s Guide
Modular Enclosure Solutions Specifier s Guide EQUIPMENT PROTECTION WWW.PENTAIRPROTECT.COM/HOFFMAN Volume 1 The Next Generation Modular Enclosure Stronger. Faster. Easier. You ve already spent tens of thousands
More informationTerminal Boxes in Stainless Steel SLS**.T
Features Variant options Stainless steel enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 6 enclosure size options Various terminal and cable gland configurations
More informationQ15P. Mitsubishi MQ Triton Dual Cab
Mitsubishi MQ Triton Dual Cab Page 1 of 12 Fitting Instructions Part Number Mitsubishi MQ Triton Dual Cab 2015+ To suit Sports Bars Check contents of kit before commencing fitment and report any discrepancies
More informationDT Family. Contents. DT Family Overview 18 DTV Series 28. Part Numbering System 18 DTMH Series 29. Dimensions 19 DTMN Series 30
ontents T amily Overview 18 TV Series 28 Part Numbering System 18 TMH Series 29 imensions 19 TMN Series 30 onfigurations 20 How To Instructions 31 Required omponents 21-22 Special Modifications 22-23 ccessories
More informationHuman Machine Interface Console Range Modular MPC
Console Range Modular MPC IP 66 TYPE, 12, 13 IK 10 (single door); IP 55 TYPE 12, 13 IK 10 (double door) 36 Product Catalogue 0 Material: ody and door: 1.5 mm mild steel. Rear panel: 1.5 mm mild steel.
More informationUses, Certifications, and Standards Electrical Control and Instruments, Indoor/Outdoor EXTERNAL FEET, WALL standard UL 508, CSA C22.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 121264CHC Encl 12X12X6 N4 Enclosure Cooper B-Line/Cable Tray Catalog Number Manufacturer escription Weight per unit Product
More informationJB & WM Specification Guide
JB & M Specification Guide Y COOSE RITTAL? Rittal understands the challenges faced every day by our customers as they strive to find solutions to their unique application requirements that aren t just
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationProduct Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationRittal WM Selection Guide. Carbon & Stainless Steel, Disconnect, Slope Top
Rittal M Selection Guide Carbon & Stainless Steel, isconnect, Slope Top Rittal allmounts M Enclosures Efficient esign, Versatility Rittal s M enclosure sets the standard for maximum use of space and ease
More information11mm Slot Label S1 = 162, S2 = 170, S3 = 250, S4 = 305, S5 = 330, S6 = 410, S7 = 490, S8 = 570, S9 = 650. Maximum Power Dissipation (Watts) T** T**
Assembly Instructions for: S1 Assembly to S Junction Instructions Boxes for: MS1 to MS Junction Boxes Boxes MS1 to MS Junction Boxes IMPORTANT: This document should be read carefully before commencing
More informationOperator Enclosures. Console Type 12 - AW-14 Data Sheet
Console Data Sheet Construction Console body, panel cover and door, top assembly and writing desk are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Panel cover is secured
More informationType 4 X Panel Enclosures
Ground-Mount s Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing out frames
More informationBaying systems TS 8. Height: 1200 mm/1400 mm, depth: 500 mm
Baying systems TS 8 System accessories Page 537 TS 8 corner enclosures Page 583 TS 8 stainless steel Page 194 TS 8 EMC-shielded Page 200 Material: Enclosure frame, roof, rear panel and gland plates: Sheet
More information7 Lighting Technology
7 Lighting Technology Light Fittings for Fluorescent Lamps Series EXLUX 6400 (Zones 2, 21 & 22) As pendant or pole-mounting fittings With electronic ballast For two-pin fluorescent lamps 1 or 2 lamp versions:
More informationalso in ATEX Data Sheet Enclosures Klippon POK Glass Fibre reinforced Polyester Enclosures
Data Sheet Enclosures Klippon POK Glass Fibre reinforced Polyester Enclosures also in ATEX Weidmüller s established range of Klippon POK GRP (Glass Fibre reinforced Polyester) enclosures has been updated
More informationCellwatch Electrical Installation
Tech20081110-1-1 Cellwatch Electrical Installation Critical Distances...2 Typical Layout...3 Typical ibmu Placement...4 Typical Control Unit Placement...5 Physical Mounting and Location - General...6 CU
More informationFor industrial applications For marine applications With proximity switch. Piston type flow switches
JJ For industrial applications JJ For marine applications JJ With proximity switch Piston type flow switches DB_Piston_type_flow_switches 01/2016 199 Piston type flow switches Piston type flow switches
More informationExplosion protected terminal boxes type, GHG 72.
1 Technical data 1.1 Plastic terminal boxes GHG 721... ATX type examination certificate BVS 13 ATX 013 X Marking acc. to 94/9/G and standard ATX x (d e mb) II T5* -55 T amb +55 Gb x (d e mb) II T6* -55
More information133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST
133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s are designed for control and instrumentation applications. They are a general-purpose enclosure intended for indoor use
More informationIECEx Certificate of Conformity
Certificate of Conformity: IECEx BAS 07.0033X http://iecex.iec.ch/iecex/iecexweb.nsf/fc034777969a786bc1256d42005bd791/9e9052... Page 1 of 4 18/06/2008 IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL
More informationEmpty enclosures IEC 62208
374 www.hensel-electric.de/en in accordance with for customized solutions and individual applications for example for low-voltage switchgear and controlgear assemblies i n accordance with the IEC 61439-series
More informationRittal Small Enclosures
Rittal Small Enclosures Fast and perfect, with an exceptionally diverse range of system accessories R The original is still the best! Packaging technology for the future Whether you require enclosures
More informationHazardous Area Electrical Equipment. TBKF/CBKF Stainless Steel Flat Roof Keyed Terminal Box Zones 1&2, 21&22. Index
Hazardous Area Electrical Equipment Made TBKF/CBKF Stainless Steel Flat Roof Keyed Terminal Box Zones 1&2, 21&22 Index Dimension Sheet Catalogue Information Leaflet Web Links TBKF/CBKF Information Page
More informationPolyester enclosures
Polyester enclosures Polyester enclosures 1 Features hemical-resistant Temperature-resistant Flame-retardant Use in Ex areas with a surface resistance < 10 9 Ω, black enclosure orrosion-proof Seawater-proof
More informationOUR VISION STAINLESS STEEL MILD STEEL MODULAR FLOOR STANDING NON METALLIC P F BLACKBURN SOUTH VIC 3130
Excalibur REAZ AUSTRALIA Enclosures PTY LTD 59 P.O. Northville BOX 2340 Drive Barnsley NSW 2278 BLACKBURN SOUTH VIC 3130 T - 03 9878 4141 sales@reaz.com.au EX-EC/S General Purpose Wall Mount Enclosures
More informationRittal The System. Rittal JB and WM Specification Guide. Faster Better Worldwide. JB and WM Industrial Wallmount Enclosures and Accessories
Rittal The System. Faster Better orldwide. Rittal JB and M Specification Guide JB and M Industrial allmount Enclosures and Accessories hy Choose Rittal? Rittal understands the challenges faced every day
More information2017 Storage Solutions & Accessories. Tough. Reliable. USA Made.
2017 Storage Solutions & ccessories Tough. Reliable. US Made. Tough & Reliable We use tested and proven designs and manufacturing techniques to ensure that any product with the UWS name on it will get
More informationINSTALLATION INSTRUCTIONS DRAWERS #240
INSTALLATION INSTRUCTIONS DRAWERS #240 Please read and fill out the enclosed warranty registration card to activate your warranty. SHIPMENT CONTENTS #1 Lid #2 Rear #3 Left side panel #4 Right side panel
More informationenmotion Recessed Automated Touchless Towel Dispenser Installation Instructions for New and Retrofit Construction
enmotion Recessed Automated Touchless Towel Dispenser Installation Instructions for New and Retrofit Construction This manual is designed to assist you in the installation of the Georgia-Pacific enmotion
More informationAssembly & Installa on Guide RB031-3: TRIPLE CROSSBAR KIT
PLEASE READ INSTRUCTIONS FULLY PRIOR TO INSTALLATION OF CROSSBAR KIT This instruction is to illustrate the recommended installation method for our Crossbar Kit, any deviation from this will be the sole
More informationEx e, ia Junction boxes TNCN. Features
TNCN Features The TNCN/TNCC range comprises many standard sizes of enclosure manufactured in 316L acid resistant stainless steel to give the maximum environmental protection. The main body is manufactured
More informationApprovals, see page 41. Detailed drawing, see page 1226/1227.
Ex enclosures Stainless steel F G B.7 With screw-fastened lid Material: Stainless steel.40 (AISI 04) Surface finish: Brushed, grain 40 Protection category: IP 66 to EN 60 9/09.00 Supply includes: Enclosure,
More informationTIP-OUT GLASS WINDSHIELD KIT
TIP-OUT GLASS WINDSHIELD KIT P/N 2881108 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please
More information2011 ilinq CATALOGUE
2011 ilinq CATALOGUE Company Overview A brand built on quality B&R Enclosures is Australia s leading manufacturer of electrical enclosures, with a comprehensive range of products designed for industrial
More informationTable of Contents. Quick Installation Guide 2 - Disconnect Switch Installation - Disconnect Handle Installation - Cutting Connecting Rod
ulletin 494V Variable Depth Disconnect Switch Installation Instructions (Cat 494V-DS30; -DSX30 - Series D; 494V-DS; -DSX - Series D) (Cat 494V-DS00; -DSX00 - Series D; 494V-DS00; -DSX00 - Series D) TTENTION:
More informationTERMINAL BOXES FOR HARSH & HAZARDOUS ENVIRONMENTS
OSUR CL HA ES EN KILLARK Z LO C SJIC SERIES TERMINAL BOXES FOR HARSH & HAZARDOUS ENVIRONMENTS Screw cover style, with or without continuous hinge 3/16 (5mm) wide flat flange for maximum gasket surface
More informationStainless Steel Enclosures TRIMURTI STAINLINK EQUIPMENTS PVT. LTD.
Stainless Steel Enclosures A P P R O V E D TRIMURTI STAINLINK EQUIPMENTS PVT. LTD. Vision People: Technology: Growth: Profit: Culture: Create a conducive environment to leverage one s full potential Invest
More informationJunction Boxes & Enclosures JBES and ECES Series: 316L Stainless Steel Enclosures Increased Safety
JBES Series Medium Voltage 11 kv ECES Series Compliance Data: ATEX - IEC: ATEX IEC CE Ex e II Ex ia IIC; Ex ib IIC T6 to T4 Ex td A21 T80 C to T130 C Ex de IIC; Ex demb IIC Operating Temperatures: -50
More informationE A E xe ENCLOSURES. For Harsh & Hazardous Environments.
E A E xe ENCLOSURES For Harsh & Hazardous Environments www.ehawke.com Connecting you through innovation Experienced With over 60 years experience protecting people and assets in the world s most demanding
More informationINDEX - ALUMINIUM RANGE HINGES. profile 0.35 N.m. FinAlu continuous hinge 466. profile 0.70 N.m. Aluminium profile continuous hinge - 50 mm
LUMINIUM RNGE INEX - LUMINIUM RNGE HINGES Finlu continuous hinge 466 luminium profile continuous hinge - 50 mm Rolled knuckle continuous hinge - 20 mm width Rolled knuckle continuous hinge - 25 mm width
More informationRectangular profiles RE 40
8.3 luminium profiles Rectangular profiles Features Universal precision, clamping and machining surface s a stabiliser for machine and subframe constructions luminium, ly anodised Produced in accordance
More informationWall-mounting steel enclosures suitable for any CRN and CRNG application
Wall-mounting steel enclosures suitable for any CRN and CRNG application 1 2 3 4 5 6 1 Front rain gutter prevents the entry of water, oil or liquids, ensuring IP66 protection. 10 9 8 7 1/18 2 A complete
More informationINSTRUCTIONS 177R0076 INSTALLATION OF TOP AND BOTTOM COVERS FOR IP00 FRAMES D3, D4 & E2 INTO RITTAL ENCLOSURES
INSTRUCTIONS 177R0076 INSTALLATION OF TOP AND BOTTOM COVERS FOR IP00 FRAMES D3, D4 & E2 INTO RITTAL ENCLOSURES This instruction sheet is for the installation of the top and bottom covers onto IP00 VLTs
More informationType 4 Panel Enclosures
Type 4 Lift-Off Cover ata Sheet Seamless poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use Protects against windblown dust and rain, splashing
More informationType 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
More informationPremium Quality - Value Price
ACE 19" RACK SYSTEMS 1 VS 7000, Super Efficient Global IT Rack Designed ready to install and meeting international standard and of Top-quality. Two 19" mounting multi-functional profiles create a solid
More informationMoDPlus Din Distribution Boards
MoDPlus Din Distribution Boards Introduction MoDPlus DIN Distribution Panel Board System MoDPlus Din type Distribution Board System has been designed and developed locally, incorporating features and benefits
More informationRipac Vario-Module 2U
Ripac Vario-Module U IE 60 97- for installation in 48.6 mm (9 ) racks. to IE 60 97-3-0. Material/Surface finish: spray-finished in RL 7035 orner trims: spray-finished in RL 7035 Side trims: spray-finished
More informationworkshop specifications Plexo³ IP 65 cabinets
workshop specifications Plexo³ IP 65 THE GLOBL SPECILIST IN ELECTRICL ND DIGITL BUILDING INFRSTRUCTURES With their IP 65 weatherproof protection and optimised dimensions, Plexo³, from 2 to 4 x 18 modules,
More informationAtlantic industrial metal and stainless steel boxes. Atlantic industrial plastic boxes METAL BOXES (1) EXTERNAL DIMENSIONS EQUIPMENTS
tlantic industrial metal and stainless steel boxes XN IMNION M OX (1) QIMN 703 tainless steel 304 lain plates ymetrical rails epth: 7. mm ymetrical rails epth: 1 mm hapes 10 10 80 36 00 36 0 36 60 367
More informationCABINETS & ENCLOSURES
S & ENCLOSURES Floor Standing Cabinets A4 Series 18RU, 27RU & 42RU PSS 262 Wall Mounted Cabinets WM Series 6RU, 12RU & 18RU PSS 263 ZH Series 6RU, 12RU & 18RU PSS 263 Cabinet ACCESSORIES Wall & Floor Mounted
More informationDimensions shown apply to both Stainless Steel and Mild Steel S1, SF*1 = 162, S2, SF*2, S2L, SF*2L = 170, S3, SF*3 = 250,
Assembly Instructions for junction boxes type: Assembly Instructions for: S1 to S / SFI1 to SFI / SFE1 to SFE S1 to S Junction Boxes MS1 to MS Junction Boxes IMPORTANT: This document should be read carefully
More informationHypra and P 17 industrial sockets
[ INUSTRIL SOKTS ] Products and systems ypra and P 17 industrial sockets 2 ranges cover 3 levels of weatherproofing: IP 44, IP 66/67 and IP 66/67-55: ypra is recommended for harsh environments (dust, water
More informationINSTALLATION &SAFETY DATA SHEET
INSTALLATION &SAFETY DATA SHEET TYPE SIZE 1 TO SIZE 9 JUNCTION BOX (S1 to S9 Stainless Steel MS1 to MS9 Mild Steel) IMPORTANT : THIS DOCUMENT SHOULD BE READ CAREFULLY BEFORE COMMENCING INSTALLATION ZONES
More informationType 4X Panel Enclosures
Wall-Mount Enclosures Type 4X Premier Series with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge Type 304 or Type 316L stainless steel (see pages 209 & 210)
More informationKaedra Weatherproof DIN Type Enclosures
Multi 9 System Catalog Section 6 Additional System Devices Kaedra Weatherproof DIN Type Enclosures Applications Expandable enclosures for service, industrial, or equipment applications Protects against
More informationGeneral characteristics
Multipole Industrial Connectors General characteristics The multipole connectors for industrial purposes are used in electric and electronic machinery, robots, electric panels, control equipments and wherever
More informationEnclosure Mounting Screws For mounting enclosures through corner holes. Wood Screws
Combination Kits Used to combine series specific enclosures to make larger units. Connect horizontally or vertically. Fitting Type Combination Kit Threaded with locknut seal for connecting sidewalls. Fits
More informationTechnical Data Sheet :
Technical Data Sheet : Die-cast Aluminium Enclosure Material: AI Si 12, as per DIN EN 1706 Components: Fastening threads M4 / M6 in the enclosure bottom. Ingress protection: IP66 / IP67 / IP68 as per IEC
More informationPolymas Watertight PK Enclosures Product Drawings Last Updated 1/6/2006
PHOENIX MECNO COMPNY PK Enclosures Product Drawings Last Updated 1/6/2006 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 301-696-9800 www.rose-bopla.com customerservice@rose-bopla.com For
More informationBlind and Polycarbonate Cases FQ Series: stainless steel cases with single door
Series Smart 22 Series Smart Blind and Polycarbonate Cases FQ Series: stainless steel cases with single door The Smart series is the proposal for boxes with and witout inner door for small and medium sized
More information