Features EN/IEC Applications

Transcription

1 PO Modular polyester boxes nsulated boxes Standards eatures ntro N/ 639- N/ 6059 N/ 608 pprovals - oxes with polyester cover: types 3, 3R,,, 6, 6P, and 3 - oxes with polycarbonate cover: types 3, 3R,,, and 3 - oxes with hinged cover: types 3, 3R,,, and 3 vailable on request - oxes with polyester cover: types 3, 3R,,, 6, 6P, and 3 - oxes with polycarbonate cover: types 3, 3R,,, and 3 - oxes with hinged cover: types 3, 3R,,, and 3 vailable on request LR - Lloyd's Register of Shipping NV L - ermanischer Lloyd - The range consists of nine boxes based on the and 85 mm modules. - The bases are made of light grey (RL 7035), hot moulded glass fibre reinforced polyester, dyed in mass. These come complete with M threaded inserts (odge) for fixing a mounting plate or mounting frame. - The cover is made of either transparent polycarbonate or light grey (RL 7035) hot moulded glass fibre reinforced polyester, dyed in mass. - PO-boxes provide optimum security to both operators and equipment because they feature total insulation and protection degree P67 according to N/ Protection degree K08 against external mechanical impacts according to N/ ach large box is a multiple of a smaller one. ts fixing points are also a multiple of those of a small box. These fixing points are blind holes for M threaded inserts. - our to six blind holes for M6 threaded inserts are also provided in each base. - PO polyester boxes are designed for both wall and pole mounting. - The box can be readily worked with conventional tools such as drills, cutting mills, saws punches, etc. - Versatile service conditions: polyester enclosures can withstand continuous temperatures up to 70 (peak temperatures up to 30 ) and the transparent polycarbonate covers resist service temperature up to 0 - Rated insulation voltage Ui = 000V. - PO boxes are UL listed, as per UL Standard 508 They are also S approved. pplications Overview of the range imensional drawings Specifications for tender documents Power dissipation values Page.3 Page.6 Page.5 Page.68 - ndustry - Oil refineries - Shipyards - Steel works - reweries - Petro-chemical plants - Public utilities - Photovoltaic.

2 PO Modular panel building ➀ Polyester cover ➀ ➁ ➁ Wall mounting feet, stainless steel or non-metallic ➂ ir vent ➃ Non-metallic hinge ➂ ➄ oupling collar ➆ ➄ ➅ ➃ ➇ ➅ ➆ ➇ ➈ ➉ epth extension frame Transparent polycarbonate cover oupling cover plate Twist lock latch oamed polyurethane gaskets with tongue and groove labyrinths at all seal points Modular boxes ntro ➈ ➉ Optimal use of the modular design The unique modular concept of PO boxes enables mounting of different standard functions in coupled boxes. Technical data ngress protection according 6059 Single enclosure with polyester cover with transparent cover P67 P66 with hinged cover P67 nclosure with flange plate P65 () nclosure with rubber cable sleeve P3/5 () nclosure combination P67 () nclosure with depth extension frame P66 () dependent on cover version used () P5 when installed at bottom side of enclosure.5

3 PO Modular polyester boxes PO PO 3 PO PO 7 ox with polyester cover P67 x W x 86 x 5 x x 86 x x 30 x x 30 x nsulated boxes Light-grey cover with fixing screws ox with polycarbonate cover P66 x W x 86 x 5 x x 86 x x 30 x x 30 x ntro Transparent cover with fixing screws ox with hinged cover P65 Transparent cover with thumb screws for the door x W x 30 x 86 x x 30 x x 30 x ox with hinged cover P55 x W x 86 x 5 x x 86 x x 30 x x 30 x Polyester cover light-grey ox with hinged cover and lock (ventilated) P x W x 30 x 86 x x 30 x x 30 x Polyester cover light-grey :.6

4 PO PO 5 PO 8 PO 6 PO PO 88 x 30 x x 30 x x 30 x x 37 x x 603 x x 30 x x 30 x x 30 x x 37 x x 603 x Modular boxes ntro 88 x 30 x x 30 x x 30 x x 30 x x 30 x x 37 x x 603 x x 30 x x 30 x x 30 x x 37 x

5 PO Modular polyester boxes PO PO 3 PO PO 7 ase with plain sides x W x 86 x 5 x x 86 x x 30 x x 30 x nsulated boxes Sizes in box refer to location of open side panel side-wall ase with open side ase with open sides x W x x W x 30 x 86 x x 86 x x 30 x x 30 x x 30 x x 30 x ntro ase with open sides x W x 30 x 86 x x 30 x x 30 x Polyester cover Light-grey cover with fixing screws x W x 86 x 5 x x 86 x x 30 x x 30 x Polycarbonate cover Transparent cover with fixing screws x W x x W x 86 x 5 x x 86 x x 30 x x 30 x inged cover Transparent cover with thumb screws for the door x W x 30 x 86 x x 30 x x 30 x epth extension frame lass fibre reinforced polyamide P6 x W x 86 x 5 x x 86 x x 30 x x 30 x Mounting plate ard paper 5 mm Sendzimir zinc coated sheet steel mm x W x W 0 x x x x x x x x Perforated.5 mm (or sliding nuts, see.3) x W 3 x x x x lind cover plate PV.5 mm x W 50 x x x x

6 PO PO 5 PO 8 PO 6 PO PO 88 x 30 x x 30 x x 30 x x 37 x x 603 x x 30 x x 30 x x 30 x x 30 x x 30 x x 30 x x 37 x x 37 x x 603 x x 603 x Modular boxes 88 x 30 x x 30 x x 30 x x 37 x x 603 x ntro 88 x 30 x x 30 x x 30 x x 37 x x 603 x x 30 x x 30 x x 30 x x 30 x x 37 x x 603 x x 30 x x 30 x x 37 x () 558 x 30 x x 30 x x 37 x x 603 x () inged cover with side flange 3 x x x x x x x x x x x x x x x x

7 PO ccessories ombi end-plates in polystyrene Width x M0/6 + x M3/5 85 x M3/5 + 3 x M5/M0 + x M0/6 9 x M5/0 x M50/0 + x M5/0 3 x M0/6 3 x M0/3 + x M0/6 x M0/3 + 0 x M5/ x M5/ oupling frames oupling frames are made of polyamide (polyurethan gasket). - omplete with drilling template. - The smallest side of the coupling frame fits the front side of the box. - The maximum passage between two coupled boxes can be marked off with the aid of the drilling template. Within this mark, any desired opening can be made. nsulated boxes able glands, see "eneral accessories" Width or dimensions of maximum opening, see "imensional drawings". ntro lind end-plates in polyester Width n polyester (funnel-shaped in polystyrene) able-end boxes or side Max Ø No. of clamps cable (mm) provided PO3 x 75 PO3 x 75 PO x 75 PO6 x 75 PO7 x PO7 3 x 75 imensions, see "imensional drawings". or dimensions of maximum opening, see "imensional drawings". able clamps Rubber cable sleeves - or direct mounting - omplete with cut-out template 8506 or use as a sealing gland on cable end boxes. Max. Ø cable: 75 mm 8505 or direct mounting to cable end box or on a mounting plate. Max. Ø cable: 75 mm Used in PO 3 and PO 7 nclosure side 85,, 370 mm 850 Universal stress relieving cable clamp for use in standard enclosures. Max. Ø cable: 75 mm Used in PO nclosure side and 600 mm 85 or mounting to universal stress relieving cable clamp 850. Max. Ø cable: 75 mm Spare part/extension. imensions, see "imensional drawings"..0

8 PO ccessories ridges Make heavy connections easier whilst guaranteeing that the original degree of protection is maintained its the mm side. 85 its the 370 mm side. Safety locks with handle* omplete with drilling template, keys and mounting hardware keys V 3 Safety locks without handle 850 Square key 8 mm Triangular key 8 mm 850 ir vents P Two air vents must be mounted per enclosure to ensure sufficient air circulation and prevent water condensation. omplete with drilling template and screws. The air vents are preferably mounted in the upper and lower part of the base Set of pieces in polyamide. RL 7035 Pole mounting - t the rear of enclosure, -profiles are installed. - round the pole, a fixation (holding) band is installed. On the -profile, clamps are placed to catch the holding band securely Set of -profiles for side and 370 mm (fixation band not included). Modular boxes ntro 850 Triangular key mm 8503 ouble-bit yale key 3 mm * Not usable with hinged cover. Mounting brackets 8566 Set of pieces in glass fibre reinforced polyamide - or external fixing points. - irect fixing through the four corner holes of the enclosure. - f extension frames are to be used, the mounting brackets shall be mounted before the frames. - Maximum permissible component weight: 00 kg Set of pieces in stainless steel (type 30) - or extremely severe working conditions. - or band iron fixation to round poles. - The four brackets are mounted directly at the rear of the box in rein forcements provided for that purpose. - ixing by M threaded bushes (supplied). - Maximum permissible component weight: 00 kg..

9 PO ccessories inges inge screw Set of pieces Remark: the box must be mounted prior to fitting the hinge screw. nsulated boxes Selection ase PO Polyester cover Polyester cover + depth extension Polycarbonate cover Polycarbon. cover + depth extension - n order to enable hinge mounting, holes must be drilled in the cover and in either the base or the extension frame. Templates for drilling these holes are supplied with eacht set. The type of hinge depends on the required combination. - ence six sets of hinges are available. ach set consists of two hinges, srews, a drilling template, the mounting instructions and, if necessary, spacer Triangular TTR sealing screw 856 or screwed cover. Set of pieces. or hinged cover shims. Set of pieces. ntro over hinges 8568 Set of pieces in stainless steel (complete with fixing hardware) Spanner 8506 or triangular TTR sealing screw. Sealing plate 8560 Set of pieces, for cover-screw sealing. over must be milled along the dotted line to a depth of 6 mm prior to hinge mounting. over screws (spare parts) Slotted screw Padlocking set 8500 Max. diameter of padlock: 8 mm. Screws for hinged cover Threaded inserts Thumb grip or cover screws or hinge screws. M odge type inserts Set of 50 pieces Set of pieces M6 odge type inserts x, 50 mm 8507 M special tool for securing M6 special tool for securing.

10 PO Universal fuseboard frames - Metering and modular frames PO 7 (delivery condition) PO 5 PO 8 PO 6 PO - PO Metering or the installation in PO7, PO5, PO8 and PO6. The meter-cross is pre-assembled for PO7. t can be adjusted for other sizes by moving the lower profile. The vertical profile is punched accordingly. ZZ ZZ ZZ ZZ ZZ PO 3 PO PO 7 PO 5 PO 6 Modular boxes ntro 30 x 86 modules N x 30 modules N x 30 8 modules N x 30 modules N x 30 modules N Universal fuseboard frames ncludes: - mpty frames fitted with an earth terminal and cover plate. - The packaging includes fixing screws and height extension studs. 30 x 86 modules N x 30 8 modules N x modules N x modules N ccessories lank plate for screening off rectangular openings m or cutout of 5 mm Marking strip self adhesive 853 m lanking plate or modules 60 ranch terminals 6 x 0 mm + x 6 mm to clip on x mm bar or modules arth bar green Neutral bar blue

11 PO quipped individual units PO 3 PO PO 7 PO 6 PO nsulated boxes nclosures for N-rail equipment ncludes: - base with two open sides - with combi end plates top: 3 x M0/6 bottom: x M3/5 + 3 x M5/0 + x M0/6 - base frame with earth connector and coverplate - transparent hinged cover 86 x 30 x 75 modules x 30 x 75 8 modules x 30 x 75 modules 856 ntro nclosures for disconnector loadbreak switches (ilos) and fused disconnector loadbreak switches (ulos) ncludes: - base with two open sides - combi end plates: PO3 on top and bottom: side 85: x M0/6 + x M3/5 PO on top and bottom: side : x M50/0 + x M5/0 PO 7 and PO are with open sides, cable entry plates are to be ordered separately, see p..9 - mounting plate with threaded holes and earthing connector - transparent cover with handle cut-out and with screws - extension shaft and operating handle isconnector loadbreak switches and fused disconnector loadbreak switches are to be ordered separately 30 x 86 x 75 LOS 0/63/80/00/5 3P/P x 30 x 75 LOS 60/00 3P/P LOS 0/63/5 3P/P + ULOS 000 3/63/00 3P/P x 30 x 75 LOS 3 60/00/50/35 3P/P ULOS P/P + ULOS P/P x 37 x 70 LOS 00/500/630 3P/P + ULOS 50 3P/P + ULOS 00 3P/P

12 PO quipped individual units PO 3 PO PO 7 PO 6 PO nclosures for loadbreak switches (ilos) and fuse bases ncludes: - base with two open sides - with combi end plates top and bottom: x M0/6 + x M3/5 - one N-rail and mounting plate with earthing - transparent cover with handle cut-out and with screws - extension shaft and operating handle 30 x 86 x 75 LOS 0/63/80 3P/P Modular boxes isconnector loadbreak switches, fuse bases and fuses are to be ordered separately ntro nclosures for changeover switches (ilos/ulos) ncludes: - base with two open sides - cable entry plates are optional, see p.. - mounting plate with changeover system (-O-) and earth bar - transparent cover with handle cut-out and with screws - extension shaft and operating handle hangeover switches are to be ordered separately 603 x 30 x 0 LOS 5 3P/P + ULOS 000 3/63/00 3P/P x 37 x 70 LOS 3 60/00/50/35 3P/P + ULOS P/P + ULOS P/P

13 PO LM mounting-frame Quick-assembly frame for PO distribution boards. Mounting-frame ssembly sequences nsulated boxes LM-profile MR x 7 x 3 mm Length = 3 m ross-connection set ZLMKV LM cross connector ZLMM LM sliding nut - ombine empty enclosures with each other. - ut vertical profile to length and slide on cross-connections. - ix distribution board at the bracket on the vertical profile. - ut horizontal profile to length and slide in cross-connections. - djust profiles and tight all screws. - dd wall-mounting-brackets. ntro ZLMM LM screw M8 x 6 ZLMU8 LM washer Required parts for cross-connection: x x x x Wall-mounting-brackets MRW M8 racket MR Universal, with screw M5 x