The Rittal Flex-Block base/plinth system

Transcription

1 The Rittal Flex-Block base/plinth system 50

2 Save time Fast assembly by simply clipping together the base/plinth components Easily bayed with toolless baying clip The enclosure is easily transported in both its empty and configured state, by removing the base/plinth trim Easy to assemble Tool-free assembly all base/plinth components Tool-free mounting accessories, e.g. baying, mounting levelling feet and castors Syetrical in enclosure widths and depths Large mounting area Space-saving cable routing in the base/plinth means more space for interior installation the enclosure Configuration with punched rail clip into position from outside or inside Flexible configuration: Punched rail with 25 pitch pattern holes 51

3 Simple, fast assembly Simply clip the side trim panel into position May be secured to the floor at any time Baying: Simply insert the baying element into two corner pieces Clip punched rails into position without the need for tools Simple installation the rails from the enclosure in the base/plinth area

4

5 Accessories Flex-Block base/plinth system Flex-Block for TS, SE, CM, TP, PC Plastic base/plinth with metal trim panels for fast, tool-free assembly Individual cable management Extensive range accessories Syetrical base/plinth Corner pieces: Fibreglass-reinforced plastic Cover caps: ABS Trim panels: Sheet steel RAL 9005 Sealed base/plinth supply includes: 1 set = 4 corner pieces 4 trim panels 4 cover caps Assembly parts for mounting on the enclosure Vented base/plinth supply includes: 1 set = 4 corner pieces 2 trim panels, vented (width) 2 trim panels, sealed (depth) 4 cover caps Assembly parts for mounting on the enclosure Base/plinth, sealed, height 100 enclosure size optionally Width or Depth Available from August 2012 Base/plinth, vented, height 100 enclosure size Width Depth Available from September 2012 Punched rail 23 x 23 (TS , TS , TS , TS ), see page 55. Baying clip (TS ), see page 55. Adaptor sleeve (TS ), see page 55. Base assembly plate (SO ), see Catalogue 33, page 546. Filter mats for vented base/plinth (TS ), see page Rittal Innovations 2012

6 Accessories Flex-Block base/plinth system Punched rail 23 x 23 for Flex-Block Tool-free installation in two levels via plug-in system in the Flex-Block depth is supported. the installation cable clamp rails. Installation options: In the width and depth Sheet steel Zinc-plated 12 punched rails. Assembly parts for mounting Length width/depth Cable clamp rail (PS etc.), see Catalogue 33, page Available from August 2012 Filter mat for Flex-Block, vented version To cover the trim panel in the Flex-Block. The filter mat is simply inserted into the trim panel from the rear. May be cut to any required length. Filter class G3 to DIN EN 779. enclosure width 600/ Available from September 2012 Baying clip for baying the Flex-Block corner pieces Tool-free baying Flex-Block base/plinths via a simple clip system. Fibreglass-reinforced plastic RAL Available from August 2012 Adaptor sleeve for levelling feet and twin castors To accoodate levelling feet and twin castors on the Flex-Block and for assembling a 200 / 300 high base/plinth by stacking the base/ plinth corner pieces. Steel Zinc-plated 12 adaptor sleeves 8 screws M12 8 washers Available from August 2012 Levelling feet (PS ), see Catalogue 33, page 555. Twin castors (DK , CP ), see Catalogue 33, page 556. Rittal Innovations

7 System accessories TS base/plinth Base/plinth components front and rear Sheet steel for TS, SE, CM, TP, PC, IW, TE Base/plinth component consisting one trim panel and two pre-configured corner pieces. In 200 high base/plinth components, one trim panel is divided into two for cable entry. Base/plinth components: Sheet steel Cover caps: Plastic Spray-finished Cover caps: RAL 9005/ set = 2 base/plinth components, 4 cover caps, 4 screws and captive nuts M12 for mounting on the enclosure. Also required: Base/plinth trim, side, see Catalogue 33, page 544. Base assembly plate SO , see Catalogue 33, page 546. Filter mat for vented versions, see Catalogue 33, page 548. Detailed drawings: Available on the Internet. 100 high, colour: RAL high, colour: RAL 7022 enclosure width Design 300 Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid enclosure width Design 300 Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Base/plinth components front and rear Stainless steel for TS, SE Stainless steel (AISI 304) Brushed, grain 400 Mounting accessories for mounting on the enclosure. 100 high: 2 trim panels front/rear 200 high: 2 corner pieces with removable trim panel 1 trim panel front/rear enclosure width Also required: Height Base/plinth trim, side, see Catalogue 33, page Base/plinth trim, modular (perforated plate), see Catalogue 33, page Rittal Innovations 2012

8 System accessories Baying cover, top A cover with two end caps may additionally be clipped over the seal between the two enclosures. This prevents dirt and liquid from collecting on the baying seal. Cover section: Plastic or stainless steel End caps: Plastic Cover section plastic and end caps: RAL 7035 Cover section 2 end caps enclosure depth RAL 7035 Stainless steel (AISI 304) Model No. TS Note: May also be fitted in the width with enclosure suites bayed back-to-back. May also be used in conjunction with dust guard trim, see Catalogue 33, page 620. Baying cover, vertical To compensate for the gap when baying back-to-back. enclosure height 2200, or may be cut to length individually for lower heights Cover section and end caps: Plastic RAL 7035 Cover section 2 end caps TP aluminium strip retritting externally on: TP three-part/two-part TP one-piece console May be mounted on all enclosures/covers with 20 fold height (max. metal thickness 2 ) Length: 1750 (for other dimensions, simply cut to length). Sufficient for desk units and consoles: 3 x width x width x width x width x width x width 1600 Length Model No. TP Aluminium strip: Extruded aluminium section Cover caps: Plastic Aluminium strip: Natural-anodised Cover caps: RAL aluminium section 6 plastic cover caps Drilling template Mounting accessories Rittal Innovations