19" XL VDI wall mounting cabinets and accessories

Transcription

1 19" XL VI wall mounting cabinets and accessories Pack Technical characteristics (p ) IP 20 - IK 08 Equipped with: 1 reversible curved door made of screen-printed safety glass 2 lateral panels removable from inside (no tools needed) Key locking x 19" adjustable depth uprights Top and bottom plain cable entry plates Top and bottom perforations for natural ventilation, can take a fan in the top part White RL 9002 at.nos Fixed cabinets 400 mm depth cabinets apacity Width (mm) Height (mm) Permissible load (kg) U U U mm depth cabinets apacity Width (mm) Height (mm) Permissible load (kg) U U U Pivoting cabinets 600 mm depth cabinets omprising: - base (wall fixing) - pivoting body providing unrestricted access to the rear of the cabinet for easy installation and maintenance Reversible pivoting direction Supplied with a horizontal cable support at.no apacity Width (mm) Height (mm) Permissible load (kg) U U U U Pack at.nos ccessories (continued) Fan With 2.5 m cord V fan Thermostat djustable from 5 to 60, 12 to 250 V NO contact: 10 ; N contact: 5 Magnetic fixing able supports Fix horizontally at the back of the cabinet for cable management For fixed cabinets (set of 2) For pivoting cabinets 1 U fixed shelf epth 115 mm Fitted projecting from two 19" uprights, for wall mounting chassis and cabinets and freestanding cabinets epth 250 mm (fitted projecting from two 19" uprights, for wall mounting and freestanding cabinets) epth 300 mm (fitted projecting from two 19" uprights, for freestanding and depth 580 and 600 mm wall mounting cabinets) Earthing kit x green-yellow wires Length 250 mm, 2.5 mm 2 ccessories able entry plate Fits in place of the plain plate at top or bottom Plate with brush able management see p

2 mini XL VI wall mounting cabinet and accessories for small business applications VI equipment for weatherproof cabinets Installation principles (p ) Pack at.nos Mini XL VI cabinet 300 mm depth cabinet ompact cabinet suitable for small business applications up to 36 RJ 45 sockets IP 20 - IK 08 Equipped with: - 1 reversible curved door made of safety glass - 2 lateral panels removable from inside - Key locking depth adjustable uprights - Top, bottom, side and rear cable entries - Top and bottom perforations for natural ventilation White RL 9002 apacity Width (mm) Height (mm) Permissible load (kg) U ccessories Self-assembly patch panel ccepts 3 LS units or 1 LS unit and 1 optical fibre cassette 1 U fixed shelf epth 120 mm Max. load 10 kg Power supply units To supply active products with 230 V x 2P + T-10/16 (French standard) x 2P + T-10/16 (German standard) For equipping with Mosaic 2P + T sockets Takes up to 8 Mosaic modules Pack at.nos Wall-mounting VI chassis for tlantic, stainless steel tlantic and Marina cabinets For integrating 19" VI equipment in tlantic, stainless steel tlantic and Marina cabinets, width 600 or 800 mm and depth 250 mm min. In 400 mm wide cabinets, the chassis can be used to integrate VI equipment from the mini XL VI cabinet an be fixed directly to the wall to create a wall mounting chassis (without cabinet) Self-locking cable ties and cable ties with tightening indicator (p. 897) can be fitted U chassis U chassis U chassis able entry for tlantic cabinets width 600 or 800 mm and 19" accessory able entry IP 43 cable entry plate with brush (throughwiring 385 x 30 mm) IP 55 cable entry plate with multi-entry cable glands Supplied with 12 ISO 32 cable glands Each cable gland takes 4 UTP/FTP/SFTP cables (Ø6.5 to 9.5 mm) ords with connectors can be fed through without having to dismantle the cable gland inside usable Ø25.5 mm Supplied with blanking plates for unused entries 1 U fixed shelf epth 115 mm Fitted projecting from two 19" uprights, for wall mounting chassis and cabinets and freestanding cabinets Patch cords (p. 877) These products are part of VI system > See p

3 XL VI 19" freestanding cabinets XL VI 19" cabinets cable entry, ventilation and accessories Technical characteristics (p. 902) IP 20 - IK 08 Equipped with: Reversible curved front door made of screen-printed safety glass Reversible metal rear door Removable lateral panels Four sides lockable with 2433 key lock Extension cabinet supplied with joining kit and no lateral panels Integrated plinth height 100 mm with ventilated plates Levelling feet adjustable from inside Supplied with 2 x 19" uprights in 600 mm depth version, and 4 uprights in 800 mm depth version Supplied with plain plates at the top White RL 9002 Pack at.nos 19" XL VI cabinets Standard Extension Width x depth Permissible cabinet cabinet apacity (mm) Height (mm) load (kg) U 600 x U 600 x U 600 x U 600 x U 600 x U 800 x U 800 x U 800 x " XL VI server cabinet epth 1000 m Supplied with 4 special-purpose 19" uprights for mounting any type of server abinets can be completely dismantled if site access is difficult Lateral reinforcements Perforated metal rear door Supplied with 50 x M6 cage nuts Standard Extension apacity Width x epth Height Permissible cabinet cabinet (mm) (mm) load (kg) U 800 x " uprights Set of 2 additional 19" uprights for 600 mm depth cabinets U U U U Technical characteristics (p. 903) Pack at.nos able entry Plate with brush For top part of width 600 mm cabinet For bottom part of width 600 and 800 mm cabinet For top part of width 800 mm cabinet Plain plate For bottom part of width 600 and 800 mm cabinet Ventilation Ventilated plates For width 600 mm cabinet For width 800 mm cabinet Plates with 230 V± fans 2.5 m cord For width 600 mm cabinet, 2 fans For width 800 mm cabinet, 3 fans Fan With 2.5 m cord For mounting on ventilated plates at.nos / V fan Thermostat djustable from 5 to 60, 12 to 250 V± NO contact: 10 ; N contact: 5 Magnetic fixing ccessories Set of 4 casters Max. load on the 4 casters: 380 kg Earthing kit 3 green-yellow wires Length 250 mm, 2.5 mm Earthing strip Length 200 mm, 6 mm Lighting kit with switch Supply with incandescent tube 230 V - 8 W Fixing 19" - 1 U Self adhesive document holder - RL 7035 Internal dimensions: 200 x 310 x 18 mm External dimensions: 235 x 340 mm Self adhesive document holder - RL 7035 Internal dimensions: 130 x 230 x 18 mm External dimensions: 165 x 260 mm Self adhesive document holder, rigid plastic closed IP 50 - RL 9002 Internal dimensions: 324 x 120 x 18 mm 892

4 XL VI 19" cabinets 19" equipment XL VI 19" cabinets and ati-rack cable management Technical characteristics (p. 903) Pack at.nos Keyboard support shelf Fit on 4 x 19" uprights For 800 mm and 1000 mm depth cabinet Max. load: 50 kg an receive: - a data-processing screen - a keyboard on the retractable support - a mouse on a sliding shelve with integrated carpet Housing for mouse or Fixed shelves, 1 U epth 250 mm (fitted projecting from two 19" uprights, for wall mounting and freestanding cabinets) epth 300 mm (fitted projecting from two 19" uprights, for freestanding and depth 580 and 600 mm wall mounting cabinets) epth 425 mm Fit on 4 x 19" uprights For 600 mm depth cabinet Max. load: 80 kg epth 625 mm Fit on 4 x 19" uprights For 800 mm depth cabinet Max. load: 80 kg epth 822 mm Fit on 4 x 19" uprights For 1000 mm depth cabinet Max. load: 80 kg Telescopic shelves, 1 U epth 440 mm Fit on 4 x 19" uprights For 600 mm depth cabinet Max. load: 50 kg epth 640 mm Fit on 4 x 19" uprights For 800 mm depth cabinet Max. load: 50 kg epth 640 mm Fit on 4 x 19" uprights For 1000 mm depth cabinet Max. load: 50 kg Pack at.nos able supports Set of 2 cable supports Universal perforations allow fixing of cable management accessories (cable trays, cable ties ) Lateral mounting between 19" uprights For 600 mm depth cabinet Mounting distance: 275 mm Mounting: - Lateral on structure for 600 mm depth cabinet - Lateral between 19" uprights for 800 mm depth cabinet - Front or back between 19" uprights for all sizes Mounting distance: 475 mm Mounting: - Lateral on structure for 800 mm depth cabinet - Lateral between 19" uprights for 1000 mm depth cabinet Mounting distance: 675 mm Lateral mounting on structure for 1000 mm depth cabinet Mounting distance: 875 mm Wire cable tray Mounted with cable supports able tray, dimensions: 1100 x 200 x 50 mm For 24 and 29 U height cabinets able tray, dimensions: 1400 x 200 x 50 mm For 33 U height cabinet able tray, dimensions: 1800 x 200 x 50 mm For 42 U and 47 U height cabinets able management For 42 U cabinets, 800 mm wide Mounted onto 19" uprights able management tray imensions: 1560 x 100 x 150 mm Set of 2 uprights allowing to increase cabinet capacity with 12 U for the 19" equipment assembly into vertical (management panels, power supply units ) Supplied with 8 cable management rings 2 U able ties with tightening indicator can be fixed on it Set of 2 vertical trim plates with brush openings for cable management Supplied with 10 management rings (2 U), 3 cable ties at.no , 3 cable ties at.no and 3 cable ties at.no " ati-rack omprising 2 x 19" uprights an build a chassis with 4 uprights using at.no apacity Width x depth Height Permissible load (mm) (mm) (kg) U 600 x Uprights for ati-rack able management rings supplied with at.no Set of 2 additional 42 U 19" uprights for building a chassis with 4 uprights 893

5 19 VI INETS >>> functional range designed for your easiness 19" VI wall mounting cabinets 6 to 16 U wall mounting cabinets and accessories NEW Technical characteristics (p. 901) Pack at.nos 19" wall mounting cabinets IP 20 - IK 08 19" freestanding cabinet - 42 U 19" wall mounting cabinet - 12 U Large choice of heights 6/9/12/16/32 and 42 U Variable depth uprights allow you to adapt the enclosure to the different type of equipment complete range of accessories for maximum accessibility and easy installation Supplied with: - 1 reversible door made of black smoked tempered glass, with integrated key lock - 2 x 19 adjustable depth uprights - 1 adjustable top cable entry, with foam gasket ottom and rear cable entries equipped with blanking plates - 2 top natural ventilation openings that can be equipped with fan plate - 1 earthing kit White RL mm depth cabinets apacity Width (mm) Height (mm) Permissible load (kg) U U mm depth cabinets apacity Width (mm) Height (mm) Permissible load (kg) U U Fan plate Fan plate equipped with: - 2 fans - thermostat - ON/OFF switch m cord Power supply 230 V± 50/60 Hz ccessories 1 U fixed shelf epth 115 mm Fitted projecting from 19" uprights, for wall mounting chassis and cabinets and freestanding cabinets epth 250 mm (fitted projecting from two 19" uprights, for wall mounting and freestanding cabinets) epth 300 mm (fitted projecting from two 19" uprights, for freestanding and depth 580 and 600 mm wall mounting cabinets) 894 These products are part of VI equipment > See p Red catalogue numbers: New products

6 19" VI freestanding cabinets 32 to 42 U freestanding cabinets and accessories NEW Technical characteristics (p. 902) Pack at.nos 19" freestanding cabinets IP 20 - IK 08 Supplied with: - 1 reversible door made of black smoked tempered glass, with integrated handle and key lock - 1 reversible metal rear door, with key lock - 2 removable side panels with plastic slam latches - 2 x 19" uprights adjustable in depth - 3 top cable entries as follows: 2 lateral with brush (1) and 1 central with sliding plates and foam gasket - 1 bottom non equipped cable entry - 1 earthing kit - 4 levelling feet White RL 9002 apacity Width x epth Height Permissible load (mm) (mm) (kg) U 600 x U 600 x U 600 x U 800 x " additional uprights Set of 2 additional 19" uprights For 32 U cabinets For 42 U cabinets Plinth 100 mm height plinth 4 removable sides, 1 rear cable entry with brush For 600 x 600 mm cabinets For 600 x 800 mm cabinets For 800 x 800 mm cabinets Joining kit To be used for joining two cabinets Vertical cable management tray Set of 2 vertical cable management trays For 42 U, 800 x 800 mm cabinet To be fit on 19" uprights supports Pack Red catalogue numbers: New products at.nos Fixed shelves 1 U epth 250 mm (fitted projecting from two 19" uprights, for wall mounting and freestanding cabinets) epth 300 mm (fitted projecting from two 19" uprights, for freestanding and depth 580 and 600 mm wall mounting cabinets) epth 345 mm - for 600 mm depth cabinets To be fit on 4 x 19" uprights Maximum load 50 kg epth 525 mm - for 800 mm depth cabinets To be fit on 4 x 19" uprights Maximum load 50 kg Telescopic shelves 1 U To be fit on 4 x 19" uprights Maximum load 25 kg epth 345 mm - for 600 mm depth cabinets epth 525 mm - for 800 mm depth cabinets Fan plate V± 50/60 Hz Fan plate equipped with: - 4 fans - thermostat - ON/OFF switch m cord Set of casters Set of 4 casters: 2 standard and 2 with locking system Maximum load on the 4 casters: 250 kg ccessories Self adhesive document holder - RL 7035 Internal dimensions: 200 x 310 x 18 mm External dimensions: 235 x 340 mm Self adhesive document holder - RL 7035 Internal dimensions: 130 x 230 x 18 mm External dimensions: 165 x 260 mm Self adhesive document holder, rigid plastic closed IP 50 - RL 9002 Internal dimensions: 324 x 120 x 18 mm (1) Only for 800 x 800 mm enclosures at.no

7 19" power supply units 230 V 19" IN rail kit IP 2X Reversible front, rear or lateral mounting on uprights Terminal box connection, cross-section 2.5 mm 2 Provide a 2 U space Pack at.nos German standard x 2P + T sockets x 2P + T sockets + M x 2P + T sockets S standard x 2P + T switch sockets French standard Socket units x 2P + T sockets x 2P + T sockets + double pole M, x 2P + T sockets Unit with voltage surge protector x 2P + T sockets + voltage surge protector and switch Keeps sockets energised after a mains overvoltage or lightning strike Ensures continuity of service Pack at.nos IP 2X IN rail kit For mounting Lexic Legrand equipment Fits directly onto 19" uprights Helps compliance with EM requirements omprises: - metal box - 24 module IN rail - terminal block for grounding - 3 U faceplate - 24 module blanking plate - 14 cable entry glands Self-assembly unit Takes 16 Mosaic modules 19" power supply units configured on request please consult us These products are part of VI system > See p Red catalogue numbers: New products

8 cable management 19" management panels cable management cable ties for VI application Pack at.nos 19" management panels U U For organization and circulation of patch cords Vertical, horizontal and front to back management Supplied with fixing accessories Management panels, 2 axes Horizontal and front to back management With round shaped rings for an optimal protection of the cords (respect of the bending radius) 1 U panel, 2 axes, metal Horizontal and front to back management 2 U panel, 2 axes, metal Horizontal and front to back management 2 U panel, 3 axes Vertical, horizontal and front to back management 1 U panel, with brush Front to back management 2 U panel, 1 axis Front to back management Optical fibre management panel 2 U, 2 axes For optical fibre jumper, vertical and horizontal management Pack at.nos able ties with tightening indicator For grouping together and organising audio, computer, VI, etc., cables Re-usable (cables can be added) Wide cable ties with patented warning system to prevent overtightening cables Release by pinching the head of the cable tie Strap held in place after tightening Width Length Tightening Ø (mm) (mm) max. min Self adhesive base Possible central fixing with screw Ø4 mm lack - 38 x 38 x 9.4 mm For cable ties max. width 20 mm Portable labelling system (p. 385) lanking plates Steel RL U U U able guide and fixing accessories Wire-guide ring Usable cross-section 56 x 89 mm Rapid fixing-kit for 19" panels For installation on XL VI uprights For 1/4 turn rapid fastening Not suitable for heavy active products Insulating material RL Set of 50 cage nuts, 50 plastic washers and 50 M6 screws for XL VI cabinets Set of 50 cage nuts, 50 washers and 50 M6 x 15 screws For 19'' VI cabinets (at.nos /01/02/03/06/07/08/09) These products are part of VI system > See p Red catalogue numbers: New products 897

9 XL VI 19" wall mounting cabinets General characteristics Metal wall mounting cabinets Textured polyester coating RL 9002 providing excellent corrosion and scratch resistance Front door made of safety glass Protection class against solid bodies and liquids: IP 20 Protection class against mechanical impact: IK 08 Max. load: 3 kg/u (i.e.: 48 kg for a 16 U wall mounting cabinet) 12 kg for the mini XL VI cabinet Front door and panels opening 96 onformity to standards The XL VI 19" wall mounting cabinets are in accordance with the following standards: 135 IE EN IE EN IE EN EI-310- IE & 2 IN egrees of protection provided by enclosures (IP code) egrees of protection provided by enclosures for electrical equipment against external mechanical impact (IK code) Information technology equipment - Safety abinets, racks, panels and associated equipment (NSI/EI/ ) imensions of mechanical structures of the mm (19") series Pivoting body opening The XL VI 19" wall mounting cabinets are designed to be integrated in installations that are in accordance with the following standards: 93 EN EN & & 2 ISO IE Information technology - Generic cabling systems Information technology - abling installation Information technology - Generic cabling for customers premises NF Part 4-41 UTE Low voltage electrical installations abling of communication network for homes imensions (mm) Height 600 epth at.nos apacity Height Width epth U U 500 Fixed U 600 cabinets U 500 Pivoting cabinets Mini VI cabinets U U U U U U U at.nos Fixed cabinets Pivoting cabinets Mini VI cabinet door opening Front door open Panels open

10 Usable depth (mm) 400 mm depth fixed cabinets 600 usable width overall mm depth fixed cabinets overall / 250 / usable width 465 fixing centre usable width 290 / 440 / 540 height 350 / 500 / 600 capacity 6U / 9U / 12U 200 x x (max. 257) 248 usable width 262 fixing centre usable width 290 height (min. 32) 271 (max. 329) 580 mm depth fixed cabinets 600 usable width (min. 34) overall 580 Fixing of wall-mounting cabinets (mm) Ø / 350 / usable width 465 fixing centre usable width 440 / 540 / 740 height 500 / 600 / 800 capacity 9U / 12U / 16U 449 (max. 507) 600 mm depth pivoting cabinets 600 usable width (min. 34) overall 615 apacity 6 U 250 Fixed 9 U 400 cabinets 12 U , U 700 Pivoting 9 U 425 cabinets 12 U U U 925 Mini cabinet 6 U ,5 Weight (kg) at.nos Weight usable width 465 fixing centre usable width 440 / 540 / 740 / 940 height 500 / 600 / 800 / 1000 capacity 9U / 12U / 16U / 21U Fixed cabinets Pivoting cabinets (max. 472) 147 (min. 110) Mini cabinet

11 VI equipment for weatherproof cabinets and cable management Mounting VI chassis in weatherproof cabinets Wall fixing Width 400 mm 4xØ9 apacity 12U Usable width 251 mm Fixing centre 262 mm Width 600 mm Wall mounting chassis at.nos apacity (mm) (mm) U U U apacity 6U / 12U / 16U Fixing centre 465 mm (19") Usable width 451 mm Fixing centre 465 mm (19") Width 800 mm VI chassis fixing centres 465 apacity 12U / 16U Fixing centre 465 mm (19") Usable width 451 mm Fixing centre 465 mm (19") at.nos apacity (mm) (mm) (mm) (mm) U U U able management able ties with tightening indicators for fixing on supports for holding for cables (at.nos /80) and VI chassis Used to hold cables /95/96 tlantic cabinets hassis apacity at.nos imensions Usable dim. under door at.nos H x W x (mm) (mm) (mm) U x600x U x400x U x600x U x600x U x800x U x600x U x600x U x800x U x800x Marina cabinets U /75 600x400x U /81 800x600x Stainless steel tlantic cabinets U /45 600x400x U /47 800x600x

12 Height 19" VI wall mounting cabinets 6 to 16 U wall mounting cabinets and accessories General characteristics Metal wall mounting cabinets Textured polyester coating RL 9002 providing excellent corrosion and scratch resistance Front door made of tempered glass Protection class against solid bodies and liquids: IP 20 Protection class against mechanical impact: IK 08 Max. load: 3 kg/u (i.e.: 48 kg for a 16 U wall mounting cabinet) oor opening (mm) 900 onformity to standards The VI 19" wall mounting cabinets are in accordance with the following standards: IE EN IE EN IE EN EI-310- IE & 2 IN egrees of protection provided by enclosures (IP code) egrees of protection provided by enclosures for electrical equipment against external mechanical impact (IK code) Information technology equipment - Safety abinets, racks, panels and associated equipment (NSI/EI/ ) imensions of mechanical structures of the mm (19") series The VI 19" wall mounting cabinets are designed to be integrated in installations that are in accordance with the following standards: 130 max. at.nos apacity U U U U EN EN & & 2 ISO IE Information technology - Generic cabling systems Information technology - abling installation Information technology - Generic cabling for customers premises Fixing of wall mounting cabinets (mm) imensions (mm) Width epth at.nos apacity U U U U at.nos apacity Height Width epth U U U U 810 Fan plate (mm) Weight (kg) The figures are representing net weight (excluding packaging) at.nos apacity Weight U U U U Ventilation area at.nos Number of fans ross-section (cm²) Flow rate (m³/h)

13 XL VI 19" freestanding cabinets General characteristics Extendable metal cabinets Textured polyester coating RL 9002 providing excellent corrosion and scratch resistance Front door made of safety glass Protection class against solid bodies and liquids: IP 20 Protection class against mechanical impact: IK 08 Max. load: 10 kg/u (i.e. 420 kg for a 42 U cabinet) 500 kg for 42 U server cabinet Front side (mm) ll cabinets are delivered in 19" configuration For 800 mm wide cabinets, the position of the uprights may be modified to take 23" equipment 60 W onformity to standards The XL VI 19" cabinets are in accordance with the following standards: IE EN IE EN IE EN EI-310- IE & 2 IN IE EN IE EN The XL VI 19" cabinets are designed to be integrated in installations that are in accordance with the following standards: EN EN & & 2 ISO IE NF Part 4-41 imensions (mm) egrees of protection provided by enclosures (IP code) egrees of protection provided by enclosures for electrical equipment against external mechanical impact (IK code) Information technology equipment - Safety abinets, racks, panels and associated equipment (NSI/EI/ ) imensions of mechanical structures of the mm (19") series Modular order for the development of mechanical structures for electronic equipment practices Modular order for the development of mechanical structures for electronic equipment practices. Interface co-ordination dimensions for the 25 mm equipment practice (dimensions for cabinets and racks) Information technology - Generic cabling systems Information technology - abling installation Information technology - Generic cabling for customers premises Low voltage electrical installations 1 E H 60 at.nos H W / / /99/ /39/ (for 23") 552 (for 23") H 1 Top view (mm) W W at.nos H (1) / (1) Without levelling feet W Front door open Front & back doors open 1 E / / / / / P at.nos W P /20/94/ / / djustments of dimensions in 12.5 mm steps - max. = + 50 mm - Front and back adjusted independently 902

14 able entry plates (mm) Keyboard support shelf (mm) W 850 max min. 460 max. W Top plates ottom plates W. 600 plates 444 x 159 W. 800 plates 737 x 174 W. 600 plates 444 x 159 W. 800 plates 444 x U. 600 x 3 x x 3 x x 4 x x 4 x 4 Shelves (mm) W1 W x x 5 Weight (kg) The weights given are net weights (excluding packaging) at.nos Fan plates (mm) Standard cabinet Extension cabinet / (ext) / (ext) / (ext) / (ext) / (ext) / (ext) at.nos Usable width W1 W (1) (1) Mounting distance 262 mm 159 Ø 7 Ø 5,5 Ø 5, Ø 7 Ø 5,5 Ø 5,5 87, at.nos Ventilation area Number ross-section Flow rate of fans (cm 2 ) (m 3 /h)

15 Height 19" VI freestanding cabinetsxxxxxx 32 to 42 U freestanding cabinets and accessories General characteristics Extendable metal cabinets Textured polyester coating RL 9002 providing excellent corrosion and scratch resistance Front door made of tempered glass Protection class against solid bodies and liquids: IP 20 Protection class against mechanical impact: IK 08 Max. load: 10 kg/u (i.e. 420 kg for a 42 U cabinet) oor opening (mm) onformity to standards The VI 19" freestanding cabinets are in accordance with the following standards: IE EN IE EN IE EN EI-310- IE & 2 IN IE EN IE EN egrees of protection provided by enclosures (IP code) egrees of protection provided by enclosures for electrical equipment against external mechanical impact (IK code) Information technology equipment - Safety abinets, racks, panels and associated equipment (NSI/EI/ ) imensions of mechanical structures of the mm (19") series Modular order for the development of mechanical structures for electronic equipment practices Modular order for the development of mechanical structures for electronic equipment practices. Interface co-ordination dimensions for the 25 mm equipment practice (dimensions for cabinets and racks) 225 max. 225 max. The VI 19" freestanding cabinets are designed to be integrated in installations that are in accordance with the following standards: EN EN & & 2 ISO IE imensions (mm) Information technology - Generic cabling systems Information technology - abling installation Information technology - Generic cabling for customers premises Front door open Front & back doors open at.nos apacity max U U U Front side (mm) epth 70 W H Width 70 at.nos apacity Height (1) Width epth U U U U (1) Without levelling feet 40 max. at.nos apacity H W U U U

16 Height Height Height Top view (mm) Fixed shelves (mm) W P epth Width at.nos apacity W P max U U U istance between fixing centres for shelves: 550 mm at.nos Width epth Height Telescopic shelves (mm) Weight (kg) The figures are representing net weights (excluding packaging) at.nos apacity Weight U U U U 115 epth Width Fan plate (mm) Extended 440 at.nos Width epth Height Extended Vertical cable management tray (mm) W Ventilation area at.nos Number of fans ross-section (cm²) Flow rate (m³/h) Plinth (mm) H epth Width at.nos Height Width epth at.nos Width epth Height

17 To maximize energy savings in any type of buildings THEY HVE SPEIFIE N INSTLLE ENERGY SVING PROUTS: iamond 2 & 3 ubai Residence Evelyn Singapore The Soil Marine ay Singapore Tribeca by the Waterfront Singapore Infrared detector 906

18 TRFFI ETETION, UTOMTI ETETOR IGITL PSSGE ETETION POWER PKS ETETION (See p. 909) utomatically switch on or off the light when user is detected (See p. 909) an be switched on manually or switched off, automatically override with remote control ETETORS (See p. 909) To complete installation from 47 to 186 m 2 areas POWER PKS (See p. 909) Where several circuits are required or for large areas Lighting management selection chart (See p. 909) 3 TEHNOLOGIES The choice of your solution depends on the surface of rooms, the walls and how the rooms are used for (passage, long stay...) PSSIVE INFRRE TEHNOLOGY Passive infrared (PIR) technology senses occupancy by detecting the difference between heat emitted from the human body in motion and background space ULTRSONI TEHNOLOGY Using the oppler principle, ultrasonic occupancy sensors work by boucing ultrasonic sound waves off objects in an area and measuring the time it takes for the waves to return UL TEHNOLOGY combination that takes advantage of the best features of both PIR and ultrasonic technologies. Using the ual Sensing Verification Principle, both sensing technologies must detected occupancy to turn lighting on, while continued detection by only one technology will hold lighting on OTHER LEGRN SYSTEMS N RNGES FOR YOUR PROJETS International standards wiring accessories See p Solutions for office equipment See p Solutions for shared work areas See p VI equipment and emergency lighting systems See p and

19 lighting management selection chart: stand alone range TRFFI ETETION / THUMWHEEL SETTING 5 to 47 m 2 48 to 93 m 2 94 to 190 m 2 Energy Saving eiling-mounting etector at.no to 23 % Wall-mounting - etectors at.no at.no etector at.no PSSGE ETETION / THUMWHEEL SETTING, MNUL ON 5 to 47 m 2 48 to 93 m 2 94 to 190 m 2 Energy Saving eiling-mounting etectors at.no or at.no push-buttons rteor: at.nos / eliane: at.no Mosaic: at.nos /31 or override function with remote control at.no onfiguration tools at.no to 65 % POWER PKS + ETETORS / THUMWHEEL SETTING, MNUL ON 5 to 47 m 2 48 to 93 m 2 94 to 190 m 2 Energy Saving eiling-mounting - - Power packs at.no or at.no etector Ultrasonic at.no pushbuttons rteor: at.nos / eliane: at.no Mosaic: at.nos /31 or override function with remote control at.no onfiguration tools at.no to 65 % Wall-mounting Power packs at.no or at.no detector IR: at.no pushbuttons rteor: at.nos / eliane: at.no Mosaic: at.nos /31 or override function with remote control at.no onfiguration tools at.no Power packs at.no or at.no detector ual technology: at.no pushbuttons rteor: at.nos / eliane: at.no Mosaic: at.nos /31 or override function with remote control at.no onfiguration tools at.no IGITL PSSGE ETETOR / PRESET 5 to 47 m 2 48 to 93 m 2 94 to 190 m 2 Energy Saving eiling-mounting etectors at.nos / pushbuttons rteor: at.nos / eliane: at.no Mosaic: at.no /31 or override function with remote control at.no onfiguration tools at.no etector at.no pushbuttons rteor: at.nos / eliane: at.no Mosaic: at.nos /31 or override function with remote control at.no onfiguration tools at.no etector at.no pushbuttons rteor: at.nos / eliane: at.no Mosaic: at.no /31 or override function with remote control at.no onfiguration tools at.no to 23 % Wall-mounting etector at.no pushbuttons rteor: at.nos / eliane: at.no Mosaic: at.no /31 or override function with remote control at.no onfiguration tools at.no