Pixus Technologies Catalog

Transcription

1 The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario rand Products US: CN:

2 Diversity in perfection. 210 Rittal Electronics Catalogue

3 Instrument cases/system enclosures. s well as the classic Rittal Vario-Case instrument case, with its numerous application benefits, the RiCase instrument case will also impress you, with its modern design in numerous colour variants and, above all, its all-metal enclosure construction. The Ripac Vario-Module system enclosure is fully compatible with the latest Ripac subrack range, making it ideal for individual installation and configuration as a microcomputer system. ll in all, the design and function of this range are sure to impress. Riox System enclosure for the horizontal installation of single boards or the installation of routers, hubs and modems. Ripac Vario-Module Shown left as an instrument case in 7 U. The 6 U subracks are cooled diagonally. The fans are located on the rear panel. Optionally also as a rack-mounted enclosure. Instrument cases/ system enclosures System enclosure Riox 214/215 System enclosure Ripac Vario-Module Instrument case RiCase Instrument case Vario-Case is Rittal RiCase The modular all-metal enclosure is a perfect safe for valuable electronics. The styling and colour add innovative design touches, emphasising the value of the electronics within. Rittal Vario-Case is the successful classic amongst Rittal instrument cases. Chassis, as well as modular assemblies and PCs, are easily installed. The pitch pattern of channels on the side panels permits variable attachment of all installed equipment. Rittal Electronics Catalogue 211

4 Overview of system enclosures and instrument cases Riox Ripac Vario-Module System enclosures Model No. see page pplications System enclosure for use as instrument case or as a rack-mounted enclosure. For the installation of Euroboards and double Euroboards (horizontal), bridges, hubs, routers or modems. System enclosures Model No. see page pplications System enclosure for use as instrument case or as a rack-mounted enclosure. For the installation of PCs and board type plug-in units. Suitable for mobile and stationary applications. Design features mm (19 ) system enclosure to IEC Optional use as instrument case or rack-mounted enclosure eight: 1 U Installation width: 84 P Optionally includes a mounting kit for installing a double Euroboard Mounting plate (accessories) for individual population Extruded aluminium section Protection category IP 40 Design features mm (19 ) system enclosure to IEC Optional use as instrument case or rack-mounted enclosure eights: 1 8 U Installation widths: 42, 63, 84 P Depths: mm Protection category IP 40 Extruded aluminium section Depth-variable interior installation User benefits Minimum space requirements of just 1 U Simple and fast assembly May easily be changed from instrument case to rack-mounted enclosure EMC upgradable Individual finishing to customer wishes User benefits May easily be changed from instrument case to rack-mounted enclosure EMC upgradable Depth-variable interior installation Wide range of accessories Neutral design 212 Rittal Electronics Catalogue

5 Overview of system enclosures and instrument cases RiCase Vario-Case is Instrument cases Model No. see page pplications Instrument case for the installation of mm (19 ) slide-in equipment and components. Suitable for mobile and stationary applications. Instrument cases Model No. see page pplications Instrument case for the installation of mm (19 ) slide-in equipment, components and individual board type plug-in units. Suitable for mobile and stationary applications. Design features Instrument case to IEC eights: 1 12 U Installation widths: mm ( 1 / 2 19 ) and mm (19 ) Depths: mm Protection category IP 40 Extruded aluminium section Symmetrical design Depth-/height-variable interior installation Design features Instrument case to IEC eights: 1 9 U Installation widths: mm ( 1 / 2 19 ) and mm (19 ) Depths: mm Protection category IP 40 Extruded aluminium section Symmetrical design Depth-/height-variable interior installation User benefits igh level of stability Optionally as Tower enclosure 3 colours as standard Ergonomic handle, feet and door variants For mobile and stationary use User benefits Optionally as Tower enclosure Ergonomic handle, feet and door variants For mobile and stationary use Stackable For the installation of mm (19 ) slide-in equipment or individual board type plug-in units Rittal Electronics Catalogue 213

6 Order information Riox system enclosures 1 U Model No mm (19 ) rack mount Model No (19 ) rack mount incl. mounting kit for double Euroboards U Width () mm (19 ) (19 ) (19 ) (19 ) (19 ) (19 ) (19 ) Depth (T) mm Model No Supply includes Side panel Front panel Rear panel ase/ cover tray Mounting kit 1 1 Model No. desktop housing U Width () mm Depth (T) mm Model No Supply includes Side panel Front panel Rear panel ase/ cover tray ccessories EMC set Mounting plate mm (19 ) rack mount 447 T1 = T 7 T E (19 ) Desktop housing T T1 = T Rittal Electronics Catalogue

7 Order information Riox system enclosures 1 U Technical specifications: System enclosures 1 U, 150/ 200/250/300 or 350 mm deep Easy to assemble with just 4 screws Optionally for use as an instrument case or rack-mounted enclosure Front panel to hold a cover film to conceal the screws Maximum possible useful interior space Optional EMC upgrades with additional EMC gaskets Option of installing 1 VME or CPCI board horizontally The Riox housing system was designed for the horizontal mounting of single boards and board type plug-in units, and for the installation of routers, hubs or modems. Minimal space requirement of just 1 U Designed as either a desktop or rack unit Individual finishing to customer wishes Simple assembly with only 4 screws EMC upgrades available Material/Surface finish: Side panels: Extruded aluminium section, untreated ase/cover trays: luminium, clear chromated Front/rear panel: Extruded aluminium section, clear chromated Mounting plate: Sheet steel System enclosure 1 U to IEC Optionally available for rackmounting in the enclosure or as an instrument case version. Mounting kit and plate of sheet steel for individual installations. Model No. see table. EMC set Model No. see table. orizontal circuit-board mounting. Rittal Electronics Catalogue 215

8 In detail: System enclosure Ripac Vario-Module The ideal enclosure solution for variable applications. The Ripac Vario-Module system enclosure can be used either as an instrument case or rack-mounted enclosure, due to the installation of corner trims or mm (19 ) flanges in the front section, which allow it to be adapted to suit existing applications. 1 Design features Front corner trim piece for configuration as an instrument case. Front flanges for configuration as a rackmounted enclosure. Variable interior installation with system components from the Ripac subrack range. 2 EMC/Earthing asic EMC protection due to the all-metal enclosure with conductive contact points. EMC expansion flanges and corner trim panels prepared for the installation of EMC gaskets. PE conductor set for connecting the cover plates/ gland plates to the side panels with Protective Earth conductors. System accessories Support stand/carrying handle to fit all 3, 4 and 6 U enclosures. djustable on a 30 angle. Rear adjustable feet may be retro-fitted. They provide mechanical protection for the connection elements and allow power cables to be wound up during transportation. Front handles for mounting on the flanges (with mounting holes). Microcomputer packaging system with a backplane and power supply unit, the Ripac Vario- Module is easily upgraded to a complete MPS system. Keyboard lid 4 U, 84 P for retrospective, front mounting on 4 U high, 84 P wide enclosures. Prepared to accommodate mechanical or membrane keyboards. crylic front doors, horizontally hinged to protect the installed control components. 216 Rittal Electronics Catalogue

9 Product information System enclosure Ripac Vario-Module May be used as an instrument case or rackmounted enclosure asic EMC protection, due to all-metal enclosure EMC-upgradable Portable Rittal Electronics Catalogue 217

10 Order information Ripac Vario-Module 2 U, 3U/42 P, 63 P Rail type Ripac Vario-Module Packs of 2 U 3 U Page Installation width (P) Depth (mm) Enclosure Model No. VM without vent holes Enclosure Model No. VM with vent holes e Expansion accessories/individual parts Corner trim pieces for assembly as instrument case Mounting flanges for assembly as rack-mounted unit without handle holes with handle holes Front horizontal rails (not suitable for depth-adjustable installation) Front horizontal rails, with 10 mm extension for injector/extractor handles (not suitable for depthadjustable installation) C1 Rear horizontal rails F Z rail DIN G Insulating strips (21 P) Conductive strips (84 P) I Threaded inserts EMC expansion K EMC gaskets, horizontal for upper/lower horizontal rail between covers and horizontal rails EMC gaskets, vertical Front/rear panel, EMC see page Other accessories Front/rear panels see page Carrying handles Front handles* crylic front door Rear adjustable feet * Only in conjunction with mounting flanges with handle holes U Section - T = Depth E = U T TE = P e x 10 = f 1 TE 2 3 E E U T e x 10 = f 1 TE Rittal Electronics Catalogue

11 Order information Ripac Vario-Module 2 U, 3U/42 P, 63 P Technical specifications: May be used as a rack mounted unit or instrument case External dimensions to DIN , part 1 for installation in enclosures, mm (19 ); Installation dimensions for board type plug-in units to DIN , part 5 and IEC and IEEE / Protection category: IP 40 for non vented version. 2 side panels 1 top cover with/without vent holes 1 bottom cover with/without vent holes 4 horizontal rails 4 threaded inserts 2 rear corner trim pieces for EMC gaskets ssembly parts Ripac Vario-Module accessories see page orizontal rails from page 148 Material/Surface finish: Side panels: Extruded aluminium section, spray finished in RL 7035 orizontal rails: Extruded aluminium section, spray finished in RL 7035 Corner trim: Die-cast zinc, spray finished in RL 7035 Covers: Sheet steel, spray finished in RL 7035 Side trim: Extruded aluminium section, spray finished in RL 7035 Contact points: Conductive 1 2 oizontal rail configuration 3 U Included in the supply C C Corner trim pieces with channel to hold EMC gaskets. Model No. see page ) Equipped as an instrument case: Front corner trim must be ordered separately. To be ordered separately, depending on application. 2) Equipped as a rackmounted unit: Mounting flanges must be ordered separately. Rittal Electronics Catalogue 219

12 Order information Ripac Vario-Module 1 U, 2 U, 3 U/84 P Rail type Ripac Vario-Module P. of 1 U 2 U 3 U Page Installation width (P) Depth (mm) Enclosure Model No. VM without vent holes Enclosure Model No. VM with vent holes e Expansion accessories/individual parts Top cover, non vented Top cover, vented ottom cover, non vented ottom cover, vented Corner trim pieces for assembly as instrument case Mounting flanges for assembly as rack-mounted unit without handle holes with handle holes Front horizontal rails (not suitable for depthadjustable installation) Front horizontal rails with 10 mm extension for injector/ extractor handles (not suitable for depthadjustable installation) C1 Rear horizontal rails F Z rail DIN G Insulating strips (21 P) Conductive strips (84 P) I Threaded inserts EMC expansion K EMC gaskets, horizontal for upper/lower horizontal rail between covers and horizontal rails EMC gaskets, vertical Front/rear panel, EMC see page Other accessories Front/rear panels see page Carrying handles Front handles* crylic front door Rear adjustable feet * Only in conjunction with mounting flanges with handle holes 1 U 2 U 3 U T = Depth E = U TE = P T e x 10 = f T T e x 10 = f e x 10 = f Section TE TE 1 E TE E E Rittal Electronics Catalogue

13 Order information Ripac Vario-Module 1 U, 2 U, 3 U/84 P Technical specifications: May be used as a rack mounted unit or instrument case External dimensions to DIN , part 1 for installation in enclosures, mm (19 ); Installation dimensions for board type plug-in units to DIN , part 5 and IEC and IEEE / Protection category: IP 40 for non vented version. 2 side panels 1 top cover with/without vent holes 1 bottom cover with/without vent holes 4 horizontal rails 4 threaded inserts 2 rear corner trim pieces for EMC gaskets ssembly parts Ripac Vario-Module accessories: see page orizontal rails: from page 148 Material/Surface finish: Side panels: Extruded aluminium section, spray finished in RL 7035 orizontal rails: Extruded aluminium section, spray finished in RL 7035 Corner trim: Die-cast zinc, spray finished in RL 7035 Covers: Sheet steel, spray finished in RL 7035 Side trim: Extruded aluminium section, spray finished in RL 7035 Contact points: Conductive Front horizontal rail with 10 mm extension For injector/extractor handles. Model No. see page ) Equipped as an instrument case: Front corner trim must be ordered separately. 2) Equipped as a rackmounted unit: Mounting flanges must be ordered separately. 2 orizontal rail configuration 3 U Included in the supply. To be ordered separately, depending on application. The front horizontal rails ( or ) and rear horizontal rails (C and D) are equipped as per the table on page 147. C C Rittal Electronics Catalogue 221

14 Order information Ripac Vario-Module 4 U, 6 U Rail type Ripac Vario-Module Packs of 4 U (3 + 1) 6 U Page Installation width (P) Depth (mm) Enclosure Model No. VM with vent holes e Expansion accessories/individual parts Top cover, non vented Top cover, vented ottom cover, non vented ottom cover, vented Corner trim pieces for assembly as instrument case Mounting flanges for assembly as rack-mounted unit without handle holes with handle holes Front horizontal rails (not suitable for depth-adjustable installation) Front horizontal rails with 10 mm extension for injector/extractor handles (not suitable for depthadjustable installation) C1 Rear horizontal rails D1 Rear horizontal rails, centre E Rear adaptor rail, centre F Z rail DIN G Insulating strips (21 P) Conductive strips (84 P) I Threaded inserts EMC expansion K EMC gaskets, horizontal for upper/lower horizontal rail between covers and horizontal rails EMC gaskets, vertical Front/rear panel, EMC see page Other accessories Front/rear panels see page Carrying handles Front handles* crylic front door Rear adjustable feet * Only in conjunction with mounting flanges with handle holes U (3 + 1) E 6 E T = Depth E = U TE = P U Rittal Electronics Catalogue

15 Order information Ripac Vario-Module 4 U, 6 U Technical specifications: May be used as a rack mounted unit or instrument case. External dimensions to DIN , part 1 for installation in enclosures, mm (19 ); Installation dimensions for board type plug-in units to DIN , part 5 and IEC and IEEE / Protection category: IP 40 for solid version 2 side panels 1 top cover with/without vent holes 1 bottom cover with/without vent holes 4 horizontal rails 4 threaded inserts 2 rear corner trim pieces for EMC gaskets 2 side trim pieces, centre ssembly parts Ripac Vario-Module accessories see page 226/227 orizontal rails from page 148 Material/Surface finish: Side panels: Extruded aluminium section, spray finished in RL 7035 orizontal rails: Extruded aluminium section, spray finished in RL 7035 Corner trim: Die-cast zinc, spray finished in RL 7035 Covers: Sheet steel, spray finished in RL 7035 Side trim: Extruded aluminium section, spray finished in RL 7035 Contact points: Conductive 1 2 orizontal rail configuration C C 4 U (3 + 1) 6 U C D C 1) Equipped as an instrument case: Front corner trim must be ordered separately. 2) Equipped as a rackmounted unit: Mounting flanges must be ordered separately. Included in the supply To be ordered separately, depending on application Rittal Electronics Catalogue 223

16 Order information Ripac Vario-Module 7 U, 8 U Rail type Ripac Vario-Module 7/8 U Packs of 7 U (6 + 1) 8 U (2 x x 1) Installation width (P) Depth (mm) Enclosure Model No. VM without vent holes Enclosure Model No. VM with vent holes e Expansion accessories/individual parts Top cover, non vented Top cover, vented ottom cover, non vented ottom cover, vented Corner trim pieces for assembly as instrument case Mounting flanges for assembly as rack-mounted unit without handle holes with handle holes Front horizontal rails (not suitable for depth-adjustable installation) Page Front horizontal rails, with 10 mm extension for injector/extractor handles (not suitable for depthadjustable installation) C1 Rear horizontal rails D1 Rear horizontal rails, centre E Rear adaptor rail, centre F Z rail DIN G Insulating strips (21 P) Conductive strips (84 P) I Threaded inserts EMC expansion EMC gaskets, vertical/horizontal see page 152, 166, 146 Front/rear panel, EMC see page Other accessories Front/rear panels see page Carrying handles Front handles* crylic front door Rear adjustable feet * Only in conjunction with mounting flanges with handle holes 7 U (6 + 1) E T = Depth E = U TE = P T 1 e x 10 = f TE 6 E E 1 E E U (2 x x 1) 224 Rittal Electronics Catalogue

17 Order information Ripac Vario-Module 7 U, 8 U Technical specifications: May be used as a rack mounted unit or instrument case. External dimensions to DIN , part 1 for installation in enclosures, mm (19 ); Installation dimensions for board type plug-in units to DIN , part 5 and IEC and IEEE / Protection category: IP 40 for non vented version. 2 side panels 1 top cover with/without vent holes 1 bottom cover with/without vent holes 4 horizontal rails 4 threaded inserts 2 rear corner trim pieces for EMC gaskets 2 side trim pieces, centre ssembly parts Ripac Vario-Module accessories: see page 226/227 orizontal rails: from page 148 Material/Surface finish: Side panels: Extruded aluminium section, spray finished in RL 7035 orizontal rails: Extruded aluminium section, spray finished in RL 7035 Corner trim: Die-cast zinc, spray finished in RL 7035 Covers: Sheet steel, spray finished in RL 7035 Side trim: Extruded aluminium section, spray finished in RL 7035 Contact points: Conductive. 1 2 orizontal rail configuration C D C 7 U (6 + 1) C C C C 8 U (2 x x 1) 1) Equipped as an instrument case: Front corner trim must be ordered separately. 2) Equipped as a rackmounted unit: Mounting flanges must be ordered separately. Included in the supply. To be ordered separately, depending on application. Rittal Electronics Catalogue 225

18 ccessories Ripac Vario-Module Enclosure population System components from the Ripac range can be used for individual interior installation of the enclosures (see page 149). Feet With fold-out support stand. Load capacity up to 20 kg. Plastic, RL 7035 Packs of Model No. VM Front flanges Required when the Ripac Vario-Module is to be used as a rack-mounted enclosure. The flanges have a channel to hold vertical EMC gaskets. Model No. see page 154 luminium, clear chromated * without handle holes ** with handle holes U Packs of Model No. VM* Model No. VM** * * * ** * ** * ** * ** * ** Front corner trim pieces Required when the Ripac Vario-Module is to be used as an instrument case. The corner trim pieces have a channel to hold vertical EMC gaskets. Model No. see page 154. Die-cast zinc Colour: RL 7035 U Packs of Model No. VM Front handles Can only be used in conjunction with mounting flanges with handle holes. Die-cast zinc, spray finished For U Packs of Model No. UV 3 and and EMC gaskets The enclosures can be fitted or retro-fitted to meet EMC requirements using EMC gaskets from the Ripac range. EMC gaskets, vertical Model No. see page 154 EMC gaskets, horizontal Model No. see page 154 Front panels/rear panels To cover the front and rear of the enclosure. lso available with hinges, vented for fan installation, or as an EMC version. Model No. see page Rittal Electronics Catalogue

19 ccessories Ripac Vario-Module Carrying handles For ergonomic transportation, even with stacked cases. May also be used as a support stand. Not suitable for use in conjunction with flanges. Maximum load 350 N. For enclosure depth P. of Model No. VM mm mm mm mm Die-cast zinc and extruded aluminium section, spray finished in RL 7035 German patent no Rear adjustable feet For retro-fitting to the rear. Dual function: Mechanical protection of connection components lso acts as a cable tidy during transportation Packs of Model No. VM P, colour RL 7035 to UL 94-V0, self-extinguishing Earthing set For connecting the cover plates/gland plates to the side panels with PE conductors. Green/yellow PE conductor cable, 1.5 mm 2, with washer, flat eyebolt and assembly parts Packs of Model No. VM Support stand/carrying handle To fit all 3 U, 4 U and 6 U enclosures, adjustable on 30 degree increments. Extruded aluminium section/die-cast, spray finished in RL support stand/carrying handle, assembly parts Note: Corner trim for support stands/carrying handles should be ordered separately For Ripac Vario-Module P. of Model No. VM 42 P P P German patent no Corner trim for VM P. of Model No. VM 3 U U U crylic front doors, hinged To protect installed control components. Side panels: luminium, spray finished in RL 7035 Window: Smoked acrylic 1 front door, assembly parts 1 U For Ripac Vario-Module Packs of Model No. VM 3 42 P P P P P P German patent no Keyboard lid 4 U, 84 P For retrospective, front mounting on a 4 U high, 84 P wide Ripac Vario-Module. Suitable for accommodating mechanical or sealed-membrane keyboards. luminium, spray finished in RL U Packs Model No. VM Rittal Electronics Catalogue 227

20 In detail: Rittal RiCase Rittal RiCase, the all-metal enclosure, provides the perfect framework for valuable electronics. Extruded aluminium sections and die-cast components create an extremely robust yet lightweight enclosure. The screw fastenings are concealed by specially designed and protective elements. Mounting angles at the front and rear allow the installation of mm (19 ) components. The RiCase desktop enclosure is supplied flatpack, i.e. partially assembled with ready-made side panels, cover and base trays. andles, a support stand/carrying handle, a folding keyboard or a glazed door are easily retrofitted. 1 Design features high level of stability and protection due to extruded aluminium sections and die-cast components. Stable, non-slip design guaranteed by 10 mm high corner caps. The resulting gap to the desktop or lower enclosure offers good air flow and ventilation conditions. Symmetrical layout for mm (19 ) population at front and rear. Mounting angles front and rear allow installation of mm (19 ) components. Depth- and height-variable installation with the aid of slide-in strips. Simply slide into the desired channel and attach as required. For door fitting the slide-in strip without tapped holes can be exchanged for a slide-in strip with tapped holes. 2 Cooling Vertical ventilation oles in the base and cover trays allow natural convection from bottom to top. Ventilation can be additionally improved by fitting a rack-mounted fan. Diagonal ventilation ir inlet is at the front via a front panel with vent slots. The heated interior air is dissipated via a fan mounted on the rear door. 228 Rittal Electronics Catalogue

21 Product information Rittal RiCase Colour variants RL 5018 RL 5012 Ral 7030 RiCase enclosures are supplied in three colour variants as standard. Other colours can also be supplied on request. Desktop enclosure for the installation of mm (19 ) rack-mounted equipment and components ll-metal design affords a high level of mechanical protection Ergonomic handle, base and door variants For mobile and stationary use 3 colour variants as standard Rittal Electronics Catalogue 229

22 In detail: Rittal RiCase RiCase enclosures can be configured individually to suit the application using doors, handles and front and rear panels. 1 andling orizontal carrying handles allow easy transportation, even of populated enclosures. Support stand/carrying handle for portable use, adjusts in 30 increments (Model No. see page 238). Tower feet ensure stability of the enclosures, in vertical orientation. Precise stackability is guaranteed, due to the designer corners of the bottom and top, which slot into one another in a non-slip, stable arrangement. 2 Doors and covers The rear may be sealed with a blanking plate. owever, the symmetrical arrangement also permits population from the rear (Model No. see page 240). hinged blanking plate improves handling and provides easier access to rear components (Model No. see page 241). The hinged rear door (also for fan installation) is equipped with a security lock (Model No. see page 240). Depending on siting conditions, the horizontally hinged rear panel can prove particularly useful e.g. for use with the tower version (Model No. see page 241). Tower version in conjunction with a corresponding front door and tower feet, RiCases may be configured as tower enclosures. The front door featuring acrylic glazing or aluminium plate with left-hand or righthand hinge, as required protects the display and control components. The painted aluminium frame section is equipped with a security lock. (Model No. see page 238) Keyboard lid suitable for the installation of mm (19 ) keyboards. orizontally hinged with security lock (Model No. see page 238). 230 Rittal Electronics Catalogue

23 Product information Rittal RiCase Configuration as a tower version Front doors made from aluminium or acrylic glazing Stackable Rittal Electronics Catalogue 231

24 Order information Rittal RiCase mm ( 1 / 2 19 )/1 U, 2 U, 3 U, 4 U Enclosure for subrack width mm ( 1 / 2 19 ) P. of 1 U 2 U 3 U 4 U Page Depth (T) mm Model No. RC non vented, RL 5018* Model No. RC non vented, RL 5012* Model No. RC non vented, RL Model No. RC vented, RL 5018* Model No. RC vented, RL 5012* Model No. RC vented, RL a b c d Weight (kg) vented/non vented 3.3/ / / / / / / / /7.5 ccessories orizontal carrying handles Support stand/ carrying handle RL 5018* RL 5012* RL lanking plate/rear panel Front door, vertically hinged Slide rails Mounting angles, mm (19 ) Threaded inserts Trim section * Extended delivery times 6.3 a b c = Width T = Depth E = U E E (1) T d x X5 7.5 X Rittal Electronics Catalogue

25 Order information Rittal RiCase mm ( 1 / 2 19 )/1 U, 2 U, 3 U, 4 U Technical specifications: Depth: 300 mm, 420 mm, 540 mm Installation width: mm ( 1 / 2 19 ) Installation options: mm ( 1 / 2 19 ) slide-in equipment and modular assemblies to DIN , part 5 and IEC Protection category: IP 42 for non vented version. Material/Surface finish: Cover trays: Extruded aluminium section/die-cast, spray finished in RL 7035 Side panels: Extruded aluminium section, spray finished in RL 7035, colours RL 5018/5012/7030* Corner caps: Plastic, RL 5018/5012/7030* mm (19 ) mounting bracket: Extruded aluminium section, clear chromated 2 side panels, 2 cover trays, 8 corner caps, 8/12/16 cover caps (300/420/540 mm depth), mm (19 ) mounting angles, 4 threaded inserts, 4 plain inserts, 1 rear panel. Enclosures are supplied partially assembled * RL 5018: turquoise RL 5012: light blue RL 7030: stone grey Special sizes and colours on request. RiCase accessories from page 236 Subrack systems from page 128 inged blanking plate Vertically hinged for installation into electronic enclosures or cases. The horizontal carrying handles, with a load bearing capacity of up to 30 kg, are easily retro-fitted. Rittal Electronics Catalogue 233

26 Order information Rittal RiCase mm (19 )/3 U, 4 U, 6 U, 7 U Enclosure for subracks width mm (19 ) P. of 3 U 4 U 6 U 7 U 9 U 12 U Page Depth (T) mm Model No. RC non vented, RL 5018* Model No. RC non vented, RL 5012* Model No. RC non vented, RL 7030 Model No. RC vented, RL 5018* Model No. RC vented, RL 5012* Model No. RC vented, RL a b c d Weight (kg) vented non vented ccessories oriz. carrying handles Support RL 5018* stand/ carrying RL 5012* handles RL lanking plate/rear panel Rear door, solid Rear door, for fan Front door, vertic. hinged Slide rails Mounting angles, mm (19 ) Threaded inserts Trim section * Extended delivery times a b c = Width T = Depth E = U E E (1) X 30 T d x X Rittal Electronics Catalogue

27 Order information Rittal RiCase mm (19 )/3 U, 4 U, 6 U, 7 U Technical specifications: Depth: 300 mm, 420 mm and 540 mm Installation width: mm (19 ) Installation options: mm (19 ) slide-in equipment and modular assemblies to DIN , part 5 and IEC Protection category: IP 42 for no vented version. Material/Surface finish: Cover trays: Extruded aluminium section/die-cast, spray finished in RL 7035 Side panels: Extruded aluminium section, spray finished in RL 7035, colours RL 5018/5012/7030* Corner caps: Plastic, RL 5018/ 5012/7030* mm (19 ) mounting angles: Extruded aluminium section, clear chromated 2 side panels, 2 cover trays, 8 corner caps, 8/12/16 cover caps (300/420/540 mm depth), mm (19 ) mounting angles, 2 threaded inserts, 4 plain inserts. Enclosures are supplied partially assembled * RL 5018: turquoise RL 5012: light blue RL 7030: stone grey Special sizes and colours on request. RiCase accessories from page 238 Subrack systems from page 128 The support stand/ carrying handle, of solid aluminium, is adjustable on 30 increments. The keyboard lid is designed for mm (19 ) keyboards and has a security lock. Rittal Electronics Catalogue 235

28 ccessories Rittal RiCase interior installation Mounting angles for mm (19 ) For additional installation of subracks. Extruded aluminium section, clear chromated 2 mounting angles ssembly parts Note: 1 pack of threaded inserts and 2 packs of mounting rails and spacers are required for depth-adjustable installation. For enclosure Packs of Model No. RC height 1 U U U U U U U U Slide rails To support heavy slide-in equipment. 1.5 mm sheet steel, yellow passivated 2 slide rails, assembly parts Enclosure depth Packs of Model No. RC 300 mm mm mm Note: Threaded inserts should be ordered separately. Threaded inserts For fastening mounting angles, slide rails, mounting kits, cable trunking etc. Slides into the grooves of the side panels. Extruded aluminium section, clear chromated 8 threaded inserts For enclosure height Packs of Model No. RC 1 U U U U U U U U Earthing set For compliance with electrical protection measures; fits all Rittal RiCase enclosures. Insert strip, pointed grub screws, green/ yellow connection lead, serrated washer, nut Packs of Model No. VC Mounting rails For depth-variable installation of the mounting angles. For static or pull-out installation of component shelves. luminium, clear chromated 2 mounting rails ssembly part For enclosure depth Packs of Model No. RC 420 mm mm Note: Threaded inserts and spacers should be ordererd separately. 236 Rittal Electronics Catalogue

29 ccessories Rittal RiCase interior installation Spacers For securing mounting rails. With 471 mm component shelves, the mounting rails are screwed directly to the side panel. 4 spacers Note: Threaded inserts should be ordered separately. ssembly kit for Packs of Model No. RC depth-adjustable mounting angles component shelf installation 409 mm wide 1) component shelf installation 471 mm wide 2) Direct installation ) mm (19 ) component shelves, see page 360 2) Component shelves, see IT Catalogue, page 429 Depth-adjustable version /.410/ mm version /.410/ mm version /.410/.420 Trim section To cover the sides on the left and right of the subrack when no rear door or rear panel is used. Extruded aluminium section, spray finished in RL trim sections ssembly parts For enclosure height Packs of Model No. RC 3 U U U U U U M6 assembly screws For captive nuts, including plastic washers. Description Packs of Model No. EL Cheese-head screw Posidrive-head screw M6 captive nuts For fastening accessories with contact of the subrack to the enclosure/frame. For fastening accessories without contact of the subrack to the enclosure/frame. Packs of Model No. EL Packs of Model No. EL Rittal Electronics Catalogue 237

30 ccessories Rittal RiCase external mounting orizontal carrying handles For easy, secure transportation May be retrofitted Load capacity 30 kg/pair End pieces: Die-cast, spray finished in RL 7035 Centre part: Extruded aluminium section, painted in RL 7035 For enclosure Packs of Model No. RC depth 300 mm mm mm carrying handles, assembly parts Support stand/carrying handles Support stand/carrying handle adjustable in 30 increments Suitable for retro-fitting to 2 7 U For mm ( 1 / 2 19 ) and mm (19 ) wide enclosures Load capacity 30 kg inged part: Die-cast, spray finished in RL 7035, other colours RL 5018/5012/7030 Centre part: Extruded aluminium section, spray finished in RL 7035 with plastic coating 1 support stand/carrying handle ssembly parts For enclosure width Col. RL W mm Model No. RC mm ( 1 / 2 19 ) 5018* mm ( 1 / 2 19 ) 5012* mm ( 1 / 2 19 ) mm (19 ) 5018* mm (19 ) 5012* mm (19 ) W = total width handle * Extended delivery times RL 5018 RL5012 RL Keyboard lid Suitable for the installation of mm (19 ) keyboards. orizontally hinged with security lock Removable cover plate Frame section: Extruded aluminium section/ die-cast, spray finished in RL7035 ase and cover plate: luminium, spray finished in RL keyboard lid, assembly parts Note: Only in conjunction with support stand/ carrying handle For enclosure width (U) Packs of Model No. RC mm (19 ) mm (19 ) Rittal Electronics Catalogue

31 ccessories Rittal RiCase external mounting Front door, vertically hinged For mechanical protection of built-in control components. Optional right-hand or left-hand hinges With security lock Frame section: Extruded aluminium section, spray finished in RL 7035 Corner pieces: Die-cast aluminium, spray finished in RL 7035 Window: Smoked acrylic 1 front door, assembly parts For enclosure width W () mm (U) Model No. RC mm ( 1 / 2 19 ) mm ( 1 / 2 19 ) mm (19 ) mm (19 ) mm (19 ) mm (19 ) luminium front door, vertically hinged For mechanical protection of built-in control components. Optional right-hand or left-hand hinges With security lock Frame section: Extruded aluminium section, spray finished in RL 7035 Corner pieces: Die-cast aluminium, spray finished in RL 7035 luminium plate For enclosure width W () mm (U) Model No. RC mm (19 ) mm (19 ) mm (19 ) front door, assembly parts Front door for tower For mechanical protection of built-in control components. Optional right-hand or left-hand hinges With security lock Frame section: Extruded aluminium section, spray finished in RL 7035 Corner pieces: Die-cast aluminium, spray finished in RL 7035 Window: Smoked acrylic For enclosure width W () mm (U) Model No. RC mm (19 ) mm (19 ) front door, assembly parts Tower feet For vertical orientation of enclosures. May be retrofitted. Plastic to UL 94-V0, self-extinguishing, RL 5018/5012/ tower feet, assembly parts Colour RL P. of Model No. RC set set set RL5018 RL5012 RL7030 Rittal Electronics Catalogue 239

32 ccessories Rittal RiCase - external mounting Rear panel To cover the rear. May be screw fastened, incl. mounting angles. 2/3 mm aluminium, natural anodised 1 rear panel mm (19 ) mounting angles ssembly parts For enclosure width mm (19 ) e1 e2 (U) Packs of Model No. RC Y Y Rear door, solid To cover the rear. inged, with security lock Optional right-hand or left-hand hinges luminium, spray finished in RL rear door, hinged ssembly parts For enclosure width (U) Packs of Model No. RC mm (19 ) mm (19 ) mm (19 ) mm (19 ) i. L. = 474 Rear door, for fan installation To cover the rear. With security lock Optional right-hand or left-hand hinges For 120 mm fan luminium, spray finished in RL rear door, hinged ssembly parts For enclosure width (U) 1 Model No. RC mm (19 ) mm (19 ) mm (19 ) mm (19 ) E = U E 2.5 Fan expansion kit With one fan, including assembly parts and connection cable (0.61 m). Technical specifications: Rated operating voltage: 230 V Power consumption: 19/18 W at 50/60 z ir throughput (unimpeded air flow): 140/165 m 3 /h, 50/60 z Temperature range: 10 C to + 55 C P. of Model No. DK Fan 1 set Rittal Electronics Catalogue

33 ccessories Rittal RiCase - external mounting lanking plates 3 mm aluminium, natural anodised mm (19 ) 2 mm aluminium, natural anodised mm ( 1 / 2 19 ) Notes: Order mounting angles for mm (19 ) blanking plates seperately if used as rear panel. U Packs of Model No. VC mm ( 1 / 2 19 ) Model No. EL mm (19 ) Ventilation front plates For venting enclosures from front or rear. 3 mm aluminium, natural anodised Width U P. of Model No. EL mm (19 ) mm (19 ) mm (19 ) lanking plate, vertically hinged For installation in electronic enclosures or cases. inges: Die-cast zinc, zinc-plated lanking plate: 3 mm aluminium, natural anodised 2 hinges, 1 front plate, assembly parts Width U b mm Model No. EL mm (19 ) mm (19 ) X Note: Order mounting angles for mm (19 ) cases separately if used as rear panel. b Cutout for hinge 35 E = U 15 E 90 recessed X lanking plate, horizontally hinged For installation in electronic enclosures or cases. inges: Die-cast zinc, zinc-plated lanking plate: 3 mm aluminium, natural anodised Width U b mm Model No. EL mm (19 ) mm (19 ) hinges, 1 front plate, assembly parts X b Note: Order mounting angles for mm (19 ) cases separately if used as rear panel. E Cutout for hinge 35 E = U recessed 6.8 X Rittal Electronics Catalogue 241

34 In detail: Rittal Vario-Case is Function combined with an attractive design are the distinguishing features of the Rittal Vario-Case is instrument case. It is suitable for the installation of complete slide-in equipment, as well as individual assemblies. The symmetrical construction guarantees simple, convenient handling. The continuous pitch pattern of channels in the side panels offers the ultimate in installation versatility. 1 Design features Cover/base trays of plastic, UL 94-V0, with or without vent slots. Side panel with pitch pattern of channels made from extruded aluminium section the robust basis for incorporating mm (19 ) slide-in equipment and modular assemblies in a depthvariable manner. Double fold-out enclosure feet in the base trays enable two different angles of inclination. Threaded inserts for depth- and height-variable mounting of system accessories (see page 250). Slide rails to support heavy installed equipment (see page 251). Mounting kit by using suitable horizontal rails, board type plug-in units may be installed directly (see page 250). Concealed assembly screws for a good appearance. Stackable due to integral enclosure feet and recepticals, even with different depths. 2 andling Support stand/carrying handle to incline cases up to 30 or for convenient transportation (see page 253). andles for horizontal or vertical mounting on the side panels (see page 253). Recessed handle in the side panels, for secure, convenient transportation. 3 Climate control Climate control Individual ventilation concepts, e.g. front panels with vent slots, vented base/cover trays or rackmounted fans. 242 Rittal Electronics Catalogue

35 Product information Rittal Vario-Case is Instrument case for the installation of complete mm (19 ) rack mounts or individual board type plug-in units Plastic roof/base trays Depth- and height-variable configuration For mobile and stationary use 4 Enclosure configuration lanking plates of anodised aluminium. lso available in a hinged version (horizontally or vertically hinged) (see page 254). Front doors of acrylic, available both horizontally and vertically hinged. In addition, the vertically hinged version is also available with an aluminium plate instead of glass. security lock is installed in all cases. See page 252 for further information. Keyboard lid for installing mm (19 ) keyboards. The aluminium trim plate is easily machined to order (see page 251). Drawers/utility table create a tidy working environment (see page 253). Rittal Electronics Catalogue 243

36 Order information Rittal Vario-Case is, mm ( 1 / 2 19 )/1 U, 2 U, 3 U, 4 U Enclosure for subrack width mm ( 1 / 2 19 ) Packs of 1 U 2 U 3 U 4 U Page Depth (mm) Model No. without vent slots VC d f g h i k l ccessories Mounting kit VC Carrying handles, vertical VC Carrying handles, horizontal VC lanking plate/rear panel VC Slide rails VC crylic door, vertically hinged VC Other VC accessories see page T = Depth E = U Section E d Section - Y T f x 25 = g h x 12.5 = i Detail Y k x 12.5 = I 50 3 Detail Z Z R Rittal Electronics Catalogue

37 Order information Rittal Vario-Case is, mm ( 1 / 2 19 )/1 U, 2 U, 3 U, 4 U Technical specifications: Total depth: 300 mm, 400 mm Installation width: mm ( 1 / 2 19 ) Installation facilities: mm ( 1 / 2 19 ) slide-in equipment and modular assemblies to DIN , part 5 and IEC Side panels: Extruded aluminium section, spray finished similar to RL 7030/7035 Cover trays: Plastic UL 94-V0 (self-extinguishing), colour similar to RL 7035 Rear panel: 2 mm aluminium, natural anodised 2 plastic cover trays 4 (6) enclosure feet and 4 (6) covers 2 side panels 1 rear panel 4 mounting angles 4 threaded inserts 4 plain inserts ssembly parts. Enclosures are supplied partially assembled. ccessories: see page EMC version available on request Special sizes and colours available on request Support stand/carrying handle For Vario-Case enclosures. Model No. see page 253. lanking plate Serves as a cover for VC. Model No. see page 254. Rittal Electronics Catalogue 245

38 Order information Rittal Vario-Case is, mm (19 )/1 U, 4 U, 7 U Û Enclosure for subrack width mm (19 ) Packs of 1 U 4 U 7 U Page Depth (mm) Model No. without vent slots VC * * Model No. with vent slots VC * * d f g h i k l ccessories Carrying handles, horizontal VC Support stand/carrying handle VC lanking plate/rear panel EL Slide rails VC crylic door, vertically hinged VC crylic door, horizont. hinged VC mm (19 ) 1 U drawer PS mm (19 ) 3 U drawer PS Other VC accessories see page * Extended delivery times T = Depth E = U Section E d Section - X 62.5 Detail X Detail Z T f x 25 = g 3 h x 12.5 = i k x 12.5 = I R Z 246 Rittal Electronics Catalogue

39 Order information Rittal Vario-Case is, mm (19 )/1 U, 4 U, 7 U Technical specifications: Installation depth: 300 mm, 400 mm, 500 mm Installation width: mm (19 ) Installation facilities: mm (19 ) slide-in equipment and modular assemblies to DIN , part 5 and IEC Side panels: Extruded aluminium section, spray finished similar to RL 7030/7035 Cover trays: Plastic UL 94-V0 (self-extinguishing), colour similar to RL 7035 Rear panel: 2 mm aluminium, natural anodised 2 plastic cover trays 4 (6) enclosure feet and 4 (6) covers 2 side panels 1 rear panel, solid 4 mounting angles 4 threaded inserts 4 plain inserts ssembly parts. Enclosures are supplied partially assembled. ccessories: see page EMC version available on request Special sizes and colours available on request Vertical carrying handles for easy transportation. Model No. see page 253. Ventilation front plate in 1 U or 3 U. Model No. see page 254. Rittal Electronics Catalogue 247

40 Order information Rittal Vario-Case is, mm (19 )/3 U, 6 U, 9 U Enclosure for subrack width mm (19 ) Packs of 3 U 6 U 9 U Page Depth (mm) Model No. without vent holes VC Model No. with vent holes VC d f g h i k l ccessories Mounting kit VC Carrying handles, horizontal VC Carrying handles, vertical VC Support stand/carrying handle VC lank plate/rear panel EL Slide rails VC crylic door, vertically hinged VC crylic door, horizont. hinged VC mm (19 ) 1 U drawer PS mm (19 ) 3 U drawer PS Other VC accessories see page T = Depth E = U Section - E d Section - Y Detail X Detail Z T f x 25 = g h x 12.5 = i k x 12.5 = I R Z 248 Rittal Electronics Catalogue

41 Order information Rittal Vario-Case is, mm (19 )/3 U, 6 U, 9 U Technical specifications: Installation depth: 300 mm, 400 mm, 500 mm Installation width: mm (19 ) Installation facilities: mm (19 ) slide-in equipment and modular assemblies to DIN 41494, part 5 and IEC Side panels: Extruded aluminium section, spray finished similar to RL 7030/7035. Cover trays: Plastic UL 94-V0 (self-extinguishing), colour similar to RL 7035 Rear panel: Plastic UL 94-V0 (self-extinguishing), colour similar to RL plastic cover trays 4 (6) enclosure feet and 4 (6) covers 2 side panels 1 rear panel with vent slots 2 mounting angles 2 threaded inserts 2 plain inserts ssembly parts. Enclosures are supplied partially assembled. ccessories: see page EMC version available on request Special sizes and colours available on request Installation facility for subracks and modular board type plug-in units. crylic door, horizontally or vertically hinged. Model No. see page 252. Rittal Electronics Catalogue 249

42 ccessories Rittal Vario-Case is Mounting kit For direct installation of board type plug-in units without using a subrack. The vertical rails/adaptors of the assembly parts are used to fasten horizontal rails/horizontal rail sets in Rittal Vario-Case is enclosures. For VC Model No. VC 3 U U Vertical rails: luminium, natural anodised daptor: Plastic 2 vertical rails, front 2 vertical rails, rear 4 threaded inserts 8 adaptors (12 for 6 U) ssembly parts. The horizontal rails/horizontal rail sets must be ordered separately. orizontal rail sets To equip Rittal Vario-Case is enclosures for the direct installation of board type plug-in units, without subracks. ccessories: Guide rails, see page 160 without integrated Z rails for backplanes or female connectors to DIN or Z rails/insulating strips should be ordered separately Fitting 3 U, 84 P with integrated Z rails for female connectors to DIN without integrated Z rails for backplanes or female connectors to DIN or Z rails/insulating strips should be ordered separately Fitting 6 U, 84 P with integrated Z rails for female connectors to DIN Model No. UV Packs of 1 set 1 set 1 set 1 set orizontal rails, front orizontal rails, rear orizontal rails, rear, with integrated Z rails Centre horizontal rail Centre horizontal rail with integrated Z rails Threaded inserts P strips ssembly screws Threaded inserts M4 For fastening mounting angles, slide rails, cable trunking etc. to the side panels. luminium, natural anodised For VC Packs of Model No. VC 1 U U U U U U U Rittal Electronics Catalogue

43 ccessories Rittal Vario-Case is Mounting angle for mm (19 ) Depth-adjustable on a 12.5 mm pitch pattern, for fastening slide-in equipment or front plates in Vario-Case enclosures. For depth-variable installation of subracks/slidein equipment via threaded inserts. luminium, natural anodised Sections, assembly screws U Packs of Model No. VC Slide rails To support heavy subracks/slide-in equipment. 1.5 mm sheet steel, passivated Slide rails, assembly screws For enclosure Packs of Model No. VC 300 mm mm mm Note: To secure the slide rails in the enclosure, threaded inserts should be ordered separately. Earthing set For compliance with electrical protection measures; fits all Rittal Vario-Case is enclosures. Insert strip, pointed grub screws, green/ yellow connection lead, serrated washer, nut Packs of Model No. VC Keyboard lid Suitable for the installation of mm (19 ) keyboards. inged, with security lock. Supplied form: Fitted keyboard lid, with solid aluminium plate on the inside (without keyboard) Centre/side parts: luminium, spray finished similar to RL 7030/7035 Corner pieces: Die-cast zinc, spray finished similar to RL 7030 Insertion plate: luminium, spray finished similar to RL 7035 P. of 4 U 6 U Width () mm 534 mm mm 292 mm a mm 244 mm b mm 282 mm c mm 286 mm Model No. VC U available on request. German patent no German registered design no. M IR registered design no. DM/ with validity for E, C, ES, FR, IT, LU, NL Keyboard lid, assembly parts b 20 c a Rittal Electronics Catalogue 251

44 ccessories Rittal Vario-Case is Front doors, vertically hinged luminium or acrylic To protect installed control components Optional right-hand or left-hand hinges Generally fitted with a security cylinder May be used as a front or rear door Side panels: Extruded aluminium section/ die-cast, spray finished in RL 7030 Centre part: luminium, spray-finished similar to RL front door, assembly parts luminium door for VC U W () mm mm b mm c mm Model No. VC mm (19 ) mm (19 ) mm (19 ) Side panels: Extruded aluminium section/ die-cast, spray finished in RL7030 Window: Smoked acrylic 1 front door, assembly parts b c crylic door for VC U W () mm mm b mm c mm Model No. VC mm ( 1 / 2 19 ) mm ( 1 / 2 19 ) mm (19 ) mm (19 ) mm (19 ) mm (19 ) Section - max. 43 German patent no European patent no with validity for C, G, NL German registered design no. 1 MR 371 IR registered design no. DM with validity for E, C, DE, ES, FR, IT, LU, NL Front doors, horizontally hinged crylic To protect installed control components Optional top or bottom hinges Generally fitted with lock and security cylinders Side panels: Extruded aluminium section/diecast, spray finished in RL7030 Window: Smoked acrylic 1 front door, assembly parts For VC U W () mm mm b mm c mm Model No. VC b 20 c mm ( 1 / 2 19 ) mm ( 1 / 2 19 ) mm (19 ) mm (19 ) mm (19 ) mm (19 ) Section - max. 43 German patent no European patent no with validity for C, G, NL German registered design no. 1 MR 371 IR registered design no. DM with validity for E, C, DE, ES, FR, IT, LU, NL 252 Rittal Electronics Catalogue

45 ccessories Rittal Vario-Case is Support stand/carrying handle Suitable for retrofitting to 2 U 6 U Support stand/carrying handle adjustable in 30 increments Load capacity up to 30 kg End pieces: Die-cast zinc, spray finished in RL 7030 Centre part: Extruded aluminium section with plastic cover, spray finished in RL support stand/carrying handle, assembly parts 130 For VC mm Packs of Model No. VC mm mm Carrying handles, vertical For easy, convenient transportation. End pieces: Die-cast zinc, spray finished similar to RL 7035 Centre part: Extruded aluminium section, spray finished similar to RL carrying handles, assembly parts For VC Packs of Model No. VC 3 U U German patent no Carrying handles, horizontal For easy, convenient transportation. Side panels: Die-cast zinc, spray finished similar to RL 7035 Centre part: Extruded aluminium section, spray finished similar to RL carrying handles, assembly parts For VC Packs of Model No. VC 300 mm deep mm deep mm deep German patent no Rubber caps for VC feet Designed for retrofitting to the feet of Vario-Case enclosures, these rubber caps prevent slipping on smooth surfaces. Soft PVC, Shore hardness 60, RL 7030 Packs of Model No. VC German patent no Drawer/utility table For keyboards up to 440 mm wide, operating manuals. Minimum depth of VC enclosures: 500 mm. luminium 1 drawer, 1 pair of telescopic slides, assembly parts U Model No. PS ccessories: Installation kit, Model No.VC (Packs of 4) Strips should be ordered separately. Model No. see page 250. Rittal Electronics Catalogue 253

46 ccessories Rittal Vario-Case is lanking plates 3 mm aluminium, natural anodised mm (19 ). 2 mm aluminium, natural anodised mm ( 1 / 2 19 ). U Packs of Model No. VC mm ( 1 / 2 19 ) Model No. VC mm (19 ) Ventilation front plates For venting enclosures and cases. 3 mm aluminium, natural anodised Width U Packs of Model No. EL mm (19 ) mm (19 ) mm (19 ) lanking plate, vertically hinged For installation in mm (19 ) enclosures. inges: Die-cast zinc, zinc-plated lanking plate: 3 mm aluminium, natural anodised b X E 2 hinges, 1 front plate, assembly parts Width U b mm Model No. EL mm (19 ) mm (19 ) Cutout for hinge 90 recessed E = U 35 X lanking plate, horizontally hinged For installation in mm (19 ) enclosures. inges: Die-cast zinc, zinc-plated lanking plate: 3 mm aluminium, natural anodised E X 35 b 2 hinges, 1 front plate, assembly parts Cutout for hinge E = U Width U b mm Model No. EL mm (19 ) mm (19 ) recessed 6.8 X Rittal Electronics Catalogue

47 ccessories Rittal Vario-Case is inge For hinged blanking plates. Die-cast zinc, zinc-plated Packs of Model No. EL German patent no UK patent no M6 x 16 assembly screws For captive nuts, including plastic washers. Description Packs of Model No. EL Cheese-head screw Posidrive-head screw M6 captive nuts For fastening accessories with contact of the subrack to the enclosure/frame. For fastening accessories without contact of the subrack to the enclosure/frame. Packs of Model No. EL Packs of Model No. EL Rittal Electronics Catalogue 255