Industrial EnclosuresED. 04

Transcription

1 onsumer & ndustrial Power Protection ndustrial nclosures. 04 or indoor and outdoor industrial applications Sheltering as a second nature imagination at work

2 ndustrial nclosures pplication guide / ecatalogue Multiox VJO PO.25 Street lighting pole boxes nsulated boxes.3.4 R PolySafe nsulated wall mounting cabinets.3.26 VMS (modular) ixorail Senior Wall mounting system enclosures.3.27 Modula 630K Modula Plus Sheet steel distribution boards RVS (stainless steel) Pedestals.2 Uabinet Subterranean enclosures.2.7 eating Ventilation limate control eneral accessories egrees of protection.67 Power dissipation values imensional drawings Specifications for tender documents eneral characteristics ndex

3 ndustrial nclosures Visit and click on ecatalogue ecatalogue Use the Quick Search to directly search on product number or keyword ind a product easily by using parametric search, entering the technical characteristics of the product you are looking for ompare many products next to each other, looking at common and comparable features omparable features ommon features very product page contains all available data: technical specifications, mounting instructions, dimensional drawings, texts for tender, Plus another very usefull functionality: all linked accessories and functions related to the choosen product ll product info in one centralised place on our site ll product info is downloadable, printable and able! lways the latest uptodate info at hand! 2

4 ndustrial nclosures ousings for all kind of applications ndustry Shipyards, mining, automotive, paper & pulp, food and beverage, petrochemicals, heavy industry, transformers, system monitoring,... ommercial pplication guide Leisure (market places, camping sites, harbours for pleasure craft, amusement parks,...), fuel stations, car washes, launderettes and laundries, service enclosures for construction yards,... Utilities nergy distribution (electricity, gas, water), cable TV, telecommunication, photovoltaic cells, solar energy,... Public services Public transport, public lighting, railways, water treatment plants, waste management,... 3

5 ndustrial nclosures Multiox VJO pplication guide Small multipurpose boxes Wide range of small to medium size multipurpose boxes for in and outdoor applications. utomation and control applications in industry, machinery, toolshop and OM. lectronic applications in data and telecom industry. s commercial and industrial power distribution boxes. ll boxes are made from polystyrene or glassfibre reinforced polycarbonate, offering a high protection degree of P66 with mechanical impact strength of K07 for polystyrene and K08 for polycarbonate. Multiox enclosures can be easily modified and/or customized (coloured, printed, with cutouts ). Polyester NM sized boxes Seven NM sized boxes according to the Joint ndustrial ouncil (J) for in and outdoor applications. utomation and control applications in oil and steel industry, petrochemical plants, breweries. pplications in utilities such as public lighting, traffic control, signalisation. or installation in aggressive environments such as shipyards, offshore oil production platforms, mining sites. ll boxes are made of hot moulded, glassfibre reinforced polyester, offering a high protection degree of P67/P66 with a mechanical impact strength of K0. VJoxes can be readily worked with conventional tools such as drills, cutting mills, saws, punches, etc. Overview of the range Page.3 Overview of the range Page.3 Product information Page.9 Product information imensional drawings Specifications for tender documents Page.4 Page.0 Page.50 imensional drawings Specifications for tender documents Power dissipation values Page.3 Page.5 Page.68 4

6 ndustrial nclosures PO R pplication guide Modular polyester boxes Range of nine medium sized, modular, multipurpose boxes for in and outdoor applications. utomation and control applications in oil and steel industry, petrochemical plants, breweries. pplications in utilities such as public lighting, traffic control, signalisation. or installation in aggressive environments such as shipyards, offshore oil production platforms, mining sites. ll boxes are made of hot moulded, glassfibre reinforced polyester, offering a high protection degree of P67 with a mechanical impact strength of K0. POboxes can be readily worked with conventional tools such as drills, cutting mills, saws, punches, etc. Universal polyester cabinets Range of seven universal multipurpose cabinets for in and outdoor applications. deal for high performance applications in eavy industry (pulp & paper mills, mining sites, wood & lumber production, steel mills, ). Petroleum refineries, chemical and petrochemical plants. Temporary connection (for construction yards, camping sites, harbours for pleasure crafts, market places, fairs, ). limentation industry and breweries. Waste water treatment, public lighting, traffic control, signalisation. or installation in aggressive environments such as shipyards, offshore oil production platforms, mining sites. ll cabinets are made of hot moulded, glassfibre reinforced polyester, offering a high protection degree of P66 with a mechanical impact strength of K0 (K07 for cabinets with glazed door). Overview of the range Page.3 Overview of the range Page.2 Product information Page.3 Product information Page.3 imensional drawings Specifications for tender Page.4 Page.52 imensional drawings Specifications for tender Page.20 Page.53 documents documents Power dissipation values Page.70 Power dissipation values Page.72 5

7 ndustrial nclosures PolySafe VMS pplication guide Multipurpose polyester cabinets Range of fourteen multipurpose, factory assembled cabinets in one depth 320 mm, for in and outdoor stationary use. pplications in ommercial: leisure (market places, camping sites, harbours for pleasure crafts, amusement parks), fuel stations, car washes, launderettes and laundries, service enclosures for construction yards, ndustrial: shipyards, mining, automotive, paper & pulp, food and beverage, petrochemicals, transformers, system monitoring, Utilities: waste water treatment, waste management, telecommunications, traffic signalisation, traffic control, public transport, energy distribution (electricity, gas, water), cable television (TV), public lighting, railways, ll cabinets are made of selfextinguishing, hot moulded, glassfibre reinforced polyester, offering a high protection degree of P65 with a mechanical impact strength of K0 (P55K07 for cabinets with glazed door). Modular enclosures system Range of five modular boxes based on a 00mm module. Rapid assembly of any configuration of units without the need for tools. or indoor application. ndustry Public utilities Motor control centers lectronic instrumentation Low voltage distribution boards The boxes are made of glassfibre reinforced polycarbonate. overs are made of either transparent or opaque polycarbonate. VMS boxes provide a high protection degree of P65 and a mechanical impact strength of K08 for the bases and endplates and K0 for the covers. Overview of the range Page.2 Overview of the range Page.2 Product information Page.4 Product information Page.3 imensional drawings Specifications for tender Page.22 Page.54 imensional drawings Specifications for tender Page.24 Page.55 documents documents Power dissipation values Page.74 Power dissipation values Page.76 6

8 ndustrial nclosures ixorail Senior Modula 630K pplication guide Type tested distribution enclosure according to N Type tested energy distribution enclosure conforms to N KM and approved. The application of the range is ideal for the installation of electrical energy distribution in domestic and commercial markets. range of 5 standard enclosures equipped with a removable N rail frame and polyester cover plates offers maximum protection thanks to the total insulation. asy wiring, due to the flexible cable entry plates on top and bottom. abinets are available as standard with protection degree P4 and have high mechanical impact of K08. Type tested distribution boards according to N Type tested energy distribution enclosure conforms to N LOV approved. Manufactured in sheet steel and delivered in flat pack format. esigned for V 40/60z 30k eff. The application of the range makes it ideal for installation in electrical distribution systems in industrial and commercial markets. range of 2 enclosures equipped with a various range of functional units based on a module of 50 mm x 500 mm offering maximum possibilities to the panelboard builder. asy wiring, due to the direct mounting of the functional units on the rear panel, used as mounting plate. abinets are available as standard with protection degree P4 and a high mechanical impact of K08. Overview of the range Page.2 Overview of the range Page.2 Product information Page.26 Product information Page.3 imensional drawings Specifications for tender Page.28 Page.56 imensional drawings Specifications for tender Page.29 Page.57 documents documents Power dissipation values Page.77 Power dissipation values Page.78 7

9 ndustrial nclosures Modula Plus, 2, 3, 4, 6 pplication guide Type tested distribution boards according to LOV approved. System enclosure for distribution boards up to 4000 in industrial and commercial market segments. Manufactured in sheet steel and deliver in flat pack format. istribution board up to 4000, and cw = 70k/s. The Rated operational voltage (Ue) is 690V, the rated isolation voltage (Ui) is 000V and the rated frequency is 50/60 z. Protection lass, protection against indirect contacts by earthing. Protection against water and dust P55 with doors and P30 without doors. Nonmetallic pedestals Wide range of Nsize and non Nsize pedestals for outdoor application like power distribution traffic signalling and public lighting telecommunication, electronics or cable TV waste water treatment camping sites and market places Pedestals are delivered with integrated bases (for non Nsizes) or to be mounted on a standard N base. ll enclosures are made from hot moulded, glass fibre reinforced polyester and offer protection degree from P20 up to P54 and are idealy suited for outdoor installation. Overview of the range Page.2 Product information Page.2 Product information Page.4 imensional drawings Specifications for tender Page.30 Page.58 imensional drawings Specifications for tender Page.32 Page.60 documents documents Power dissipation values Page.80 Power dissipation values Page.84 8

10 ndustrial nclosures RVS Uabinet pplication guide Stainless steel pedestals wide range of stainless steel RVS pedestals for outdoor use complies with the standard N and the The RVS stainless steel pedestals make it possible to offer professional above ground solutions for cable networks, telecommunications, recreation grounds and other general applications. n stainless steel S 304, painted in a polyester coating RL range from N 00 up to N 4 in the width and deliverable in 5 different heights and one depth of 355 mm. The cabinets have partially sunken bases in stainless steel or in concrete. The pedestals offers maximum protection to the user and equipment thanks to the protection degree P43 K0 according the 60529, N and N 5002 Subterranean enclosures Stainless steel enclosures used in underground applications and suitable for installing all kinds of equipment for permanent or temporary connectivity. n stainless steel S 304, with bulb plate cover. They can remain underground both in active and passive condition. They avoid obstacles at street level and are vandalism approved. The enclosure offers maximum protection to the user and equipment due to the high protection degree of the diving bell principle and the very strong structure and cover according the 60529, N 24 and N.4452 Used on markets, fairs and other events, but they are also suitable for permanent connections, low voltage energy distribution, glass fiber connections for T related applications or for installing equipment for mobile telephony. Overview of the range Page.3 Product information Page.22 imensional drawings Specifications for tender documents Power dissipation values Page.44 Page.65 Page.86 Product information imensional drawings Specifications for tender documents Page.2 Page.46 Page.66 9

11 ndustrial nclosures Notes pplication guide 0

12 ndustrial nclosures.4 Multiox.9.3 VJO PO pplication guide / ecatalogue.25 Street lighting pole boxes nsulated boxes nsulated wall mounting cabinets Wall mounting system enclosures Sheet steel distribution boards Pedestals Subterranean enclosures limate control eneral accessories eneral characteristics ndex.

13 ndustrial nclosures Notes nsulated boxes.2

14 ndustrial nclosures Overview nsulated oxes Multiox P66 VJO P67/P66 PO P67 65 x 65 x 57/8 86 x 86 x x 5 x x 65 x 57/8 236 x 86 x x 86 x x 94 x 57/8 0 x 0 x 66/90 30 x 94 x 57/8 287 x 236 x 38/ x 287 x 42/ x 302 x x 302 x 75 nsulated boxes 30 x 30 x 75/ x 338 x 70/ x 302 x x 94 x 57/8 80 x 0 x 90// x 389 x 70/ x 302 x x 80 x 90//65 49 x 440 x x 302 x x 80 x 90// x 372 x x 254 x / x 603 x 75 x W x in mm.3

15 Multiox Small multipurpose boxes nsulated boxes pplications eatures and benefits deal for automation and control applications in industry, machinery, toolshop and OM. lectronic applications in data and telecom industry. lso suitable for use as commercial and industrial distribution boxes. Standards N N N N V 0606 Teil /.84 pprovals Only for polycarbonate boxes different basic enclosures (from 65 x 65 mm up to 36 x 254 mm) with up to 3 different cover depths. Material: made of polystyrene or glassfibre reinforced polycarbonate. olour: rey RL 7035 igh protection degree, P66K07 for polystyrene, and P66K08 for polycarbonate, by means of injected polyurethane seal. Polycarbonate boxes are available with smooth side walls (only one entry) or with several metric knockouts. Polystyrene boxes are available with smooth side walls or with several metric knockouts. Opaque grey or transparent covers. esigned for surface mounting. ombinations of heights and widths optional. Polystyrene boxes (650 glow wire test) are suitable for use in temperatures up to +70, polycarbonate boxes (960 glow wire test) are suitable for use in temperatures up to +20. Total insulation igh resistance to chemical and aggressive influences. Noncorrosive and maintenancefree. alogenfree. Selfextinguishing (UL94V2). Rated insulation voltage Ui = 000V Overview of the range imensional drawings Specifications for tender documents Page.3 Page.0 Page.50.4

16 Multiox Why Multiox o you prefer something standard or can it be tailormade? offers you: customerspecific developments for all your applications and requirements, exclusively to meet your needs! ll colours (environmental aspects, customised, differentiated) Painted or screened With cutouts (circular, rectangular, square) oupling facilities in vertical and horizontal direction M shielded Small multipurpose boxes Or do you prefer the "ready to install and use" answer? (quipped and wired).5

17 Multiox Small multipurpose boxes (for terminals) (for terminals and components) Polystyrene Polycarbonate (*) Mounting plate (nsulated) N profile 5x5x N profile 35x7,5x nsulated boxes ase With metric knockouts Smooth With metric knockouts Smooth With metric knockouts epth = 57 = 8 = 57 = 8 = 57 = 8 = 57 = 8 = 57 = 8 rey over RL Transparent over M M M rey over RL 7035 x W = 65 x 65 mm x W = 94 x 65 mm x W = 94 x 94 mm Transparent over x 45 mm L=49,5 long/short side x 45 mm L=49,5 short side x 74 mm L=80 long side L=80 long/short side Smooth With metric knockouts = 57 = 8 = 66 = M x W = 0 x 0 mm x 90 mm L=92 long/short L=8 long/short side side Smooth With metric knockouts Smooth With metric knockouts = 66 = 90 = 57 = 8 = 57 = 8 = 75 = M 42 M x W = 30 x 94 mm x W = 30 x 30 mm x 74 mm L= long side L=06 long side x 0 mm L= long/short L=06 long/short side side Smooth = 75 = M x W = 80 x 94 mm x 74 mm L=54 long side L=44 long side With metric knockouts Smooth = 57 = 8 = 57 = (*) Smooth = one metric knockout on short side for power supply cord! (See dimensional drawings on.0) Pack.=.6

18 Multiox Small multipurpose boxes (for terminals and components) ase With metric knockouts Smooth epth = 90 = = 65 = 90 = = 65 rey over RL Polystyrene Polycarbonate (*) Transparent over M rey over RL 7035 x W = 80 x 0 mm Transparent over Mounting plate (nsulated) 50 x 90 mm N profile 35x7,5x L=44 long side Small multipurpose boxes M 65 x W = 82 x 80 mm 50 x 50 mm L=44 long side With metric knockouts = 90 = = Smooth = 90 = = With metric knockouts = 90 = = M x W = 254 x 80 mm x 50 mm L=26 long side Smooth = 90 = = With metric knockouts = = M x W = 36 x 254 mm x 220 mm L=336 long side Smooth = = (*) Smooth = one metric knockout on short side for power supply cord! (See dimensional drawings on.0) Pack.= Multiox Matrix M (Multiox) eight Width

19 Multiox ccessories ombi set Thumb grip or joining several boxes horizontal and/or vertical or fixing on to cover screws O O small M vailable for all Multioxes set = 4 pcs O small M O small M arrying handle Used with Multioxes for portable purposes (plastic, blue). nsulated boxes O2 O large from M 53 on inges onverts removable covers into hinged covers. (incl. drilling template) small up to M 52 with plastic screws with selftapping screws ouble membrane nipple P66 Special plastic material (elastic and large from M 53 on temperatureresistant) Secure fitting without locknut, two integrated sealing membranes. Wall mounting brackets or external mounting of all Multioxes able glands, see p M6 set = 4 pieces Padlock 8676 or protection against unauthorised M20 M25 M access. vailable from M 65 on ir vent (Px4) To allow ventilation and prevent Spacers n plastic (6 + 8 mm), determines the distance between Pboards or mounting condensation. ir vents are preferably mounted in the upper and lower part of the box M plates and the base of the box set = 8 pieces (incl. fixing screws) vailable for all Multioxes. overscrews Short for grey cover, enclosure depth rilling template ids drilling, setting the required min. spacing, maximum number of holes and box positioning Long for grey cover, enclosure dept & Short for transparent cover, enclosure depth Long for transparent cover, enclosure depth and

20 VJox Polyester NM sized boxes pplications eatures nsulated boxes ndustry reweries Steel works Shipyards Oil refineries Public utilities Petrochemical plants Standards N N N pprovals UL types 3, 3R, 3S, 4, 4, 6, 2 and 3 S types 3, 3R, 3S, 4, 4, 6, 2 and 3 S (ustralian Standards) VJboxes are designed in accordance with the Joint ndustrial ouncil (J) US. The VJrange consists of seven box sizes in three versions: with screw cover with stainless steel hinges with plastic hinges The bases and covers are made of light grey (RL 7035), hot moulded, glass fibre reinforced polyester, dyed in mass. They come complete with 4 threaded inserts (odge) for fixing a mounting plate. askets that guarantee an optimal tightness degree, are made of polyurethane foam. ll fixing hardware is made of stainless steel. The box can be readily worked with conventional tools, such as drills, cutting mills, saws, punches, etc. Versatile service conditions: polyester enclosures can withstand continuous temperatures up to 70 (58 ) (peak temperatures up to 50 or 302 ) VJboxes provide optimum security to both operators and equipment because they feature total insulation and protection degree P67/P66 according to (P68 on demand) Protection degree K0 against external mechanical impacts according to N and This protection degree covers the total volume of the enclosure according to N and VJ polyester boxes are maintenancefree and corrosion resistant. Rated insulation voltage Ui = 000V VJboxes are UL listed, as per UL Standard 508 and S approved as per 22.2 nr. 94 types 3, 3R, 3S, 4, 4, 6, 2 and 3. Special versions Overview of the range Page.3 imensional drawings Specifications for tender documents Power dissipation values Page.3 Page.5 Page.68 With air vents With inset polycarbonate window (226 x 75).9

21 VJox Polyester NM sized boxes Type VJ 66 VJ 86 VJ 08 VJ 20 ox with polyester cover P67 () (acc. to N60529 m deep /2h.) x W x Weight (kg) 86 x 86 x x 86 x x 236 x x 287 x nsulated boxes With fixing screws ox with hinged cover P67 With stainless steel hinges x W x Weight (kg) 86 x 86 x x 86 x x 236 x x 287 x ox with hinged cover P67 With plastic hinges x W x Weight (kg) 86 x 86 x x 86 x x 236 x x 287 x ox with raised polyester cover P67 () (acc. to N60529 m deep /2h.) x W x Weight (kg) 287 x 236 x x 287 x With fixing screws ox with hinged raised cover P67 x W x Weight (kg) 287 x 236 x x 287 x With stainless steel hinges ox with hinged raised cover P67 x W x Weight (kg) x 236 x x 287 x With plastic hinges Mounting plate Sendzimir zinc plated sheet steel 2 mm x W 24 x x x x () P68 on request.0

22 VJox ccessories inges The VJox plastic hinges allow the cover to open at an angle exceeding 80. The cover can be lifted off and reinstalled without the use of a tool, which substan VJ 42 VJ 64 VJ 86 cially reduces the operations within the cover. 389 x 338 x x 338 x x 389 x x 389 x x 440 x x 440 x y simply adjusting one of the pivot parts, the cover becomes unremovable Set of 2 pieces RL 7035 Surface mounted windows Screwed P67 x W = 262 x 2 NM sized boxes Screwed P67 with indication strip 389 x 338 x x 389 x x 440 x x W = 240 x Screwed P67 without indication strip x W = 27 x x 338 x x 389 x x 440 x imensions on.0 ir vents P44 Two air vents must be mounted per enclosure to ensure sufficient air circulation and prevent condensation water. 389 x 338 x x 389 x x 440 x omplete with template and screws. The air vents are preferably mounted in the upper and lower part of the box Set of two pieces in polyamide. RL x 338 x x 389 x x 440 x x x x

23 VJox Notes nsulated boxes.2

24 PO Modular polyester boxes Standards eatures Modular boxes N N N pprovals oxes with polyester cover: types 3, 3R, 4, 4, 6, 6P, 2 and 3 oxes with polycarbonate cover: types 3, 3R, 4, 4, 2 and 3 oxes with hinged cover: types 3, 3R, 4, 4, 6, 2 and 3 oxes with polyester cover: types 3, 3R, 4, 4, 6, 6P, 2 and 3 oxes with polycarbonate cover: types 3, 3R, 4, 4, 2 and 3 oxes with hinged cover: types 3, 3R, 4, 4, 6, 2 and 3 Lloyd's Register of Shipping x e. S 05T0034U The range consists of nine boxes based on the 300 and 85 mm modules. The bases are made of light grey (RL 7035), hot moulded glass fibre reinforced polyester, dyed in mass. These come complete with M4 threaded inserts (odge) for fixing a mounting plate or mounting frame. The cover is made of either transparent polycarbonate or light grey (RL 7035) hot moulded glass fibre reinforced polyester, dyed in mass. POboxes provide optimum security to both operators and equipment because they feature total insulation and protection degree P67 according to and N Protection degree K0 against external mechanical impacts according to N and This protection covers the total volume of the enclosure according to N and ach large box is a multiple of a smaller one. ts fixing points are also a multiple of those of a small box. These fixing points are blind holes for M4 threaded inserts. our to six blind holes for M6 threaded inserts are also provided in each base. PO polyester boxes are designed for both wall and pole mounting. The box can be readily worked with conventional tools such as drills, cutting mills, saws punches, etc. Versatile service conditions: polyester enclosures can withstand continuous temperatures up to70 (peak temperatures up to 50 ) and the transparent polycarbonate covers resist service temperature up to 20 PO polyester boxes are maintenancefree and corrosion resistant. Rated insulation voltage Ui = 000V. PO boxes are UL listed, as per UL Standard 508, types 3, 3R, 4, 4, 6, 6P, 2 and 3 They are also S approved. pplications Overview of the range imensional drawings Specifications for tender documents Power dissipation values Page.3 Page.4 Page.52 ndustry Oil refineries Shipyards Steel works reweries Petrochemical plants Public utilities Page.70.3

25 PO Modular polyester boxes Type PO PO 3 PO 4 PO 7 ox with polyester cover P67 x W x Weight (kg) 86 x 5 x x 86 x x 302 x x 302 x nsulated boxes Lightgrey cover with fixing screws ox with polycarbonate cover P66 x W x Weight (kg) 86 x 5 x x 86 x x 302 x x 302 x Transparent cover with fixing screws ox with hinged cover P67 Transparent cover with thumb screws for the door x W x Weight (kg) 302 x 86 x x 302 x x 302 x ox with hinged cover P55 x W x Weight (kg) 86 x 5 x x 86 x x 302 x x 302 x Lightgrey cover ox with hinged cover and lock (ventilated) P44 x W x Weight (kg) 302 x 86 x x 302 x x 302 x Lightgrey cover Pack:.4

26 PO PO 5 PO 8 PO 6 PO PO x 302 x x 302 x x 302 x x 372 x x 603 x x 302 x x 302 x x 302 x x 372 x x 603 x Modular boxes 488 x 302 x x 302 x x 302 x x 302 x x 302 x x 372 x x 603 x x 302 x x 302 x x 302 x x 372 x

27 PO Modular polyester boxes Type PO PO 3 PO 4 PO 7 ase with plain sides x W x Pack 86 x 5 x x 86 x x 302 x x 302 x nsulated boxes ase with 2 open sides Sizes in box refer to location of open side panel ase with 4 open sides x W x Pack x W x Pack 302 x 86 x x 86 x x 302 x x 302 x x 302 x x 302 x Polyester cover Lightgrey cover with fixing screws x W x Pack 86 x 5 x x 86 x x 302 x x 302 x Polycarbonate cover Transparent cover with fixing screws x W x x W x Pack 86 x 5 x x 86 x x 302 x x 302 x inged cover Transparent cover with thumb screws for the door x W x Pack 302 x 86 x x 302 x x 302 x epth extension frame lass fibre reinforced polyamide P6 Mounting plate Pertinax 5 mm Sendzimir zinc coated sheet steel 2 mm Perforated.5 mm (or sliding nuts, see.3) x W x Pack x W x W x W Pack 86 x 5 x x x x x 86 x x x x x 302 x x x x x 302 x x x x lind cover plate ovidur.5 mm x W Pack 50 x x x x

28 PO PO 5 PO 8 PO 6 PO PO x 302 x x 302 x x 302 x x 372 x x 603 x x 302 x x 302 x x 302 x x 302 x x 302 x x 302 x x 372 x x 372 x x 603 x x 603 x Modular boxes 488 x 302 x x 302 x x 302 x x 372 x x 603 x x 302 x x 302 x x 302 x x 302 x x 372 x x 603 x x 302 x x 302 x x 372 x () x 302 x x 302 x x 372 x x 603 x () inged cover with side flange 43 x x x x x x x x x x x x x x x x

29 PO Modular panel building O Polyester cover 2 O 2 Wall mounting feet, stainless steel or nonmetallic O 3 O 4 Ventilator Nonmetallic hinge 3 O 5 oupling collar nsulated boxes O 6 O 7 O 8 O 9 O 0 epth extension frame lear polycarbonate cover oupling cover plate Twist lock latch oamed polyurethane gaskets with tongue and groove labyrinths at all seal points 9 0 Optimal use of the modular design The unique modular concept of PO boxes enables mounting of different standard functions in coupled boxes..8

30 PO ccessories ombi endplates in polystyrene Width 4 x M20/6 + x M32/ x M32/ x M25/M x M20/ x M25/ x M50/ x M25/ x M20/ x M40/ x M20/6 300 x M40/ x M25/ x M25/ oupling frames oupling frames are made of polyamide (rubber). omplete with template. The smallest side of the coupling frame fits the front side of the box. The maximum passage between two coupled boxes can be marked off with the aid of the template. Within this mark, any desired opening can be made. able glands, see p..2 lind endplates in polyester Width Width or dimensions of maximum opening, see page.6 ableend boxes n polyester or side Type Max Ø Nr. of clamps (funnelshaped in polystyrene) cable (mm) provided PO3 x PO3 2 x PO4 x PO7 3 x 75 imensions, see page.7 Modular boxes or dimensions of maximum opening, see page J.6 or direct mounting to cable end box. Max. Ø cable: 75 mm Used in PO 3 and PO 7 nclosure side 85, 300, 370 mm 850 Universal stress relieving cable clamp. Max. Ø cable: 75 mm Used in PO 4 nclosure side 300, 370, 600 mm 85 able clamps () 8505 or mounting to universal stress relieving attachment Max. Ø cable: 75 mm Spare part () See drawing on page.7.9

31 PO ccessories nsulated boxes Rubber cable sleeves or direct mounting omplete with template 8506 or use as a sealing gland on cable end boxes. Max. Ø cable: 75 mm ridges Make heavy connections easier whilst guaranteeing that the original degree of protection is maintained its the 300 mm side. 852 its the 370 mm side. ir vents P44 Two air vents must be mounted per enclosure to ensure sufficient air circulation and prevent water condensation. omplete with template and screws. The air vents are preferably mounted in the upper and lower part of the base Set of 2 pieces in polyamide. RL 7035 Pole mounting t the rear of enclosure, profiles are installed. round the pole, a fixation (holding) band is installed. On the profile, clamps are placed to catch the holding band securely Set of 2 profiles for side 300 and 370 mm (fixation band not included). Safety locks with handle omplete with drilling template, keys and mounting hardware keys V 2432 Safety locks without handle Square key 8 mm Triangular key 8 mm Triangular key mm oublebit yale key 3 mm Mounting brackets Set of 4 pieces in glass fibre reinforced polyamide or external fixing points. irect fixing through the four corner holes of the enclosure. f extension frames are to be used, the mounting brackets shall be mounted before the frames. Maximum permissible component weight: 50 kg Set of 4 pieces in stainless steel (type 304) or extremely severe working conditions. or band iron fixation to round poles. The four brackets are mounted directly at the rear of the box in reinforcements provided for that purpose. ixing by M4 threaded bushes (supplied). Maximum permissible component weight: 50 kg..20

32 PO ccessories Type inges inge screw Set of 2 pieces Remark: the box must be mounted prior to fitting the hinge screw. Selection ase PO Polyester cover Polyester cover + depth extension Polycarbonate cover Polycarbon. cover + depth extension n order to enable hinge mounting, holes must be drilled in the cover and in either the base or the extension frame. Templates for drilling these holes are supplied with eacht set. The type of hinge depends on the required combination. ence six sets of hinges are available. ach set consists of two hinges, srews, a drilling template, the mounting instructions and, if necessary, spacer Triangular TTR sealing screw or screwed cover. Set of 2 pieces. or hinged cover Modular boxes shims. Set of 2 pieces. over hinges Set of 2 pieces in stainless steel (complete with fixing hardware) Spanner 8506 or triangular TTR sealing screw. over must be milled along the dotted line to a depth of 6 mm prior to hinge Sealing plate Set of 2 pieces mounting. Padlocking set over fixing screws Slotted screw Max. diameter of padlock: 8 mm. Threaded inserts Thumb grip or cover screws or hinge screws. M4 odge type inserts Set of 50 pieces Set of 2 pieces M6 odge type inserts x 2, 50 mm M4 special tool for securing M6 special tool for securing.2

33 PO Universal fuseboard frames Type nsulated boxes Universal fuseboard frames ncludes: mpty frames fitted with an earth terminal and cover plate. The packaging includes fixing screws and height extension studs. 302 x 86 4 modules x modules x modules x modules x modules x 86 4 modules x modules x modules ccessories lank plate Marking strip for screening off rectangular openings m or cutout of 45 mm self adhesive 8532 m.22

34 PO quipped individual units Type PO 3 PO 4 PO 7 PO 6 PO nclosures for Nrail equipment ncludes: base with two open sides with combi end plates top: 3 x M20/6 bottom: 2 x M32/ x M25/ x M20/6 base frame with earth connector and coverplate transparent pivoting cover 86 x 302 x 75 4 modules x 302 x modules x 302 x modules 8562 nclosures for disconnector loadbreak switches (ilos) and fused disconnector loadbreak switches (ulos) ncludes: base with two open sides combi end plates: PO3 on top and bottom: side 85:4 x M20/6 + x M32/25 PO 4 on top and bottom: side 300:2 x M50/ x M25/20 PO 7 and PO are with 2 open sides, cable entry plates are to be ordered separately, see p..9 mounting plate with threaded holes and earthing connector transparent cover with handle cutout and with screws extension shaft and operating handle isconnector loadbreak switches and fused disconnector loadbreak switches are to be ordered separately 302 x 86 x 75 LOS 40/63/80/00/25 3P/4P x 302 x 75 LOS 2 60/200 3P/4P LOS 40/63/25 3P/4P + ULOS /63/00 3P/4P x 302 x 75 LOS 3 60/200/250/35 3P/4P ULOS P/4P + ULOS P/4P x 372 x 270 LOS 4 400/500/630 3P/4P + ULOS 250 3P/4P + ULOS P/4P Modular boxes.23

35 PO quipped individual units Type PO 3 PO 4 PO 7 PO 6 PO nsulated boxes nclosures for loadbreak switches (ilos) and fuse bases ncludes: base with two open sides with combi end plates top and bottom: 4 x M20/6 + x M32/25 one Nrail and mounting plate with earthing transparent cover with handle cutout and with screws extension shaft and operating handle 302 x 86 x 75 LOS 40/63/80 3P/4P isconnector loadbreak switches, fuse bases and fuses are to be ordered separately nclosures for changeover switches (ilos/ulos) ncludes: base with two open sides cable entry plates are optional, see p..9 mounting plate with changeover system (O) and earth bar transparent cover with handle cutout and with screws extension shaft and operating handle hangeover switches are to be ordered separately 603 x 302 x 20 LOS 25 3P/4P + ULOS /63/00 3P/4P x 372 x 270 LOS 3 60/200/250/35 3P/4P + ULOS P/4P + ULOS P/4P

36 ndustrial nclosures Street lighting pole boxes ase and cover in fiberglass reinforced polyester (types, and ). ase and cover in fiberglass reinforced thermoplast (type ). onstructed for mounting in lighting poles or on facades. Total insulation P44 K09 Junction boxes escription quipment Ref. no. Pack. Type Type over with 4 screws M4. ntries Top: 2 threaded P6 equipped with universal cable entries (85084) and compression bushes (85047) ottom: 2 threaded P2 of which equipped with an universal entry (6032) over with triangular screw (TTR) and sealable. ntries ottom: 2 universal P (85082) ncludes: 2 pin fuseholders 20 (6902) support with 4 terminals 6 mm 2 (77924) with insulated hood in rubber (890704) ncludes: 3 pin fuseholders 20 (6902) terminal with 4 terminals 6 mm 2 (77924) with insulated hood in rubber (890704) ncludes: 2 pin fuseholders 20 (6902) support with 4 terminals 6 mm 2 (77922 without earth connector) with insulated hood in rubber (890704) nsulated boxes Type over with triangular screw 8 mm ntries Top: threaded P2 ottom: 3 which can be used for: l protection tube Ø 28 mm 2 universal P2 (6032) or 2 compression glands P2 (8505) use together with a brass nut extra knockout Ø 3 mm non used entries can be sealed from the inside by a blanking plug (85067) mpty unit ottom equipped with 2 brass nuts P2 ox with mounting plate with: 3 pin fuseholders 20 (6902) support with terminals with 2 compression nuts able section: 2535 mm 2 (779204) The terminals are equipped with an insulated hood Type over with 2 triangular screws (TTR) ntries Top: knockout with a supplied nut 20 ottom: 5 of which 3 knockouts 3 for l protection tube Ø 28 mm or 3 V4 0 mm 2 or 3 VU4 0 mm 2 VO st 6 mm 2 V3.5 mm 2 or V3 2.5 mm 2 non used entries can be sealed from the inside by a supplied blanking plug ncludes 3 disconnectors for cylindrical fuses S32 support with 4 terminals 6 mm 2, each one with 2 compression units and insulated hood in rubber ccessories ixation on the back (l) for type Set of 2 fixations + 4 selftapping screws in stainless steel ixation on the back (nox) for type 8968 Set of 2 fixations + 4 selftapping screws in stainless steel Key for types and Triangular key (TTR) Key for type Triangular key 8 mm imensional drawings Page.8.25

37 ndustrial nclosures Notes nsulated boxes.26

38 ndustrial nclosures pplication guide / ecatalogue.3 R nsulated boxes.4 PolySafe nsulated wall mounting cabinets Wall mounting system enclosures Sheet steel distribution boards Pedestals Subterranean enclosures limate control eneral accessories eneral characteristics ndex.

39 ndustrial nclosures Overview insulated wall mounting cabinets nsulated wall mounting cabinets R P66 35 x 25 x x 35 x x 45 x x 45 x 230 PolySafe P x 500 x x 750 x x 500 x x 750 x x 000 x x 535 x x 250 x x 500 x x 635 x x 750 x x 835 x x 000 x x 000 x x 250 x x 750 x x 000 x x 000 x 320 x W x in mm.2

40 R Universal polyester cabinets Standards eatures Universal cabinets N N N pprovals UL types 3, 3R, 3S, 4, 4, 2 and 3 S types 3, 3R, 3S, 4, 4, 2 and 3 S ustralian Standards The range is available in seven sizes, ranging from 35 x 25 to 035 x 835 mm. The cabinets are made of lightgrey (RL 7035) hot moulded, glass fibre reinforced polyester, dyed in mass. The enclosure is furnished with four threaded studs and bolts for mounting plate or mounting frame installation. The enclosure provides total insulation and a protection degree of P66 following and N Protection degree K0 against external mechanical impacts according to N and (K07 for cabinets with glazed door). This protection covers the total volume of the enclosure according to N and Resists temperatures up to 70 in continuous use (peak temperatures up to 50 ). Self extinguishing and halogenfree. abinets are maintenance free and corrosion resistant. Rated insulation voltage Ui = 000V. pplications eavy industry rewery Steel mills Public services Petrochemical plants Street signalisation Temporary connection (for construction sites) Telecom Photovoltaic energy Overview of the range imensional drawings Specifications for tender documents Power dissipation values Page.2 Page.20 Page.53 Page.72.3

41 R nsulated wall mounting cabinets Monobloc type of cabinet n and outdoor use 7 dimensions 35x25x70 up to 035x835x300 mm, 2 or 3 point locking mechanism lass fibre reinforced polyester Protection degree P66*K0 (plain door) itted for mounting plate and modular mounting frame Wall mounting/pole fixing xecution on base (metal or concrete) pprovals: UL/S/S Selfadhesive rainhood (as a standard accessory with each cabinet) avoiding dripping water drops while opening the door Mounting frame with individual modular cover plates for Nrail equipment 50 mm between centres, up to 80 modules! RL P66* * R Product of Product of competitor competitor atalogue P66 P66 P65 Lab Tests P66 P65/54 P42 onstruction Petrochemicals onveyer belts.4

42 R urable polyurethane gasket rgonomic new closing mechanism Reducing closing force by 25% an also be operated by swinghandle nsulated wall mounting cabinets Patented doorlifter for bigger dimensions ensuring the door takes it s center position during closing Traffic Water treatment amping and otels.5

43 R Universal polyester cabinets nsulated wall mounting cabinets abinet P65 K0 With individual double bit lock 3 mm abinet P66 K0 With central double bit lock 3 mm Type x W x R x 25 x point R x 35 x point R x 45 x point R x 45 x point abinet P66 K0 With central swing handle for profile half cylinder lazed door cabinet P65 K07 With individual double bit lock 3 mm 8328 point point point lazed door cabinet P66 K07 With central double bit lock 3 mm lazed door cabinet P66 K07 With central swing handle for profile half cylinder Pack:.6

44 R pplications R 75 R 86 R 08 ndustry Steel works Oil refineries reweries Shipyards Public utilities 735 x 535 x x 635 x x 835 x point Universal cabinets point

45 R Universal polyester cabinets ccessories nsulated wall mounting cabinets Mounting plates Pertinax 5 mm Sendzimir zinc coated sheet steel 2 mm Metal perforated.5 mm Mounting frame anks Modules Type x W x x W R x 25 x x R x 35 x x R x 45 x x R x 45 x x Rail for terminal blocks vailable spaces for terminal ull cover plates Plain With cutouts for Nrail equipment With cutout for individual modular cover plates Number of ind. mod. cover plates containable ndividual modular cover plates P20 (PV) Plain With cutout for Nrail equipment x W 50 x () () 50 x x (2) (2) Modules Pack: () and (2): see page.0.8

46 R R x 535 x x R x 635 x x R x 835 x x nsulated wall mounting cabinets x x x () 8380 (2) () (2)

47 R nsulated wall mounting cabinets ousing in one piece Removable door: left or righthand hinged (not for version with swinghandle) Slightly curved gasketslot avoiding stagnant water ixing points at rear of door over plate: polyester RL 7035 hinged independent reversible sealable with snapon fixing Three point closing system with one lock. xchangeable locks ndependent rail for terminal blocks Mounting frame removable predrilled reinforced Nrails ntegrated hinges. oor opens 80 Mounting plate metal pertinax perforated irect wall fixing points or wall fixing lugs in plastic material or stainless steel..0

48 R ommon accessories ixing lugs Set of 4 fixing lugs. 304 stainless steel. Profile half cylinder locks Standard: = 40 mm L = 30,5 mm With 2 keys V Set of 4 fixing lugs in polyamide With 2 keys 242 With 2 keys inge supports for inner door 8300 Set of 2 hinge supports for cover plate. Together with a closed cover plate an inner door can be realised. With 2 keys With square key, 6 mm With square key, 8 mm With triangular key, 8 mm L Universal cabinets Lock inserts To replace doublebit inserts from With triangular key, mm standard delivery mm With doublebit key, 3 mm mm 8 mm mm Ventilation grids (P44) Set of two ventilation grids rilling Ø 34,9 mm Please refer to chapter for more ventila Other locks on request. tion options. andles Supporting chair Neutral handle or R 75 and 86, for temporary andle with lock and 2 keys V connections andle with lock and 2 keys andle with lock and 2 keys andle with lock and 2 keys andle for profile half cylinder andle for profile half cylinder for padlocking.

49 R ommon accessories (continued) nsulated wall mounting cabinets ranch terminals 6 x 0 mm x 6 mm 2 to clip on 2 x 2 mm bar Phase bar black arth bar green Neutral bar blue lanking plate or 4 modules or 4 modules Marking strip 8532 m Self adhesive ocument pocket 856 N 4 W x = 325 x 80 mm N 5 W x = 55 x 225 mm Nuts or perforated mounting plates M4 M M

50 R Notes nsulated wall mounting cabinets.3

51 PolySafe Multipurpose polyester cabinets nsulated wall mounting cabinets Standards eatures N N N pprovals abinets with one door: type 3, 3R, 3S, 4, 4, 2, 2K and 3 abinets with two doors: type 3, 3R, 3S, 4, 4, 2, 2K and 3 oupled cabinets: type 3, 3R, 3S, 2, 2K and 3 mbient conditions ndoor and outdoor stationary use, at temperatures between 50 and 70 in continuous use and at peak temperatures up to +50 and excessive height up to 2000 m Suitable for aggressive and marine or corrosive environments 4 standard dimensions (from 500 x 500 up to 250 x 000) in one depth 320 mm abinets are standard factory assembled (empty or equipped) igh protection degree P65K0 (20J) according to and N and (P55 K07 for cabinets with glazed door) This protection covers the total volume of the enclosure according to N and Material: selfextinguishing, hot moulded, halogenfree, fiberglass reinforced polyester (environment friendly) olour: grey RL7035, dyed in mass esigned for wall mounting, floor standing and pole fixing oupling possibilities in height, width and depth Total insulation oor with 5point latching mechanism xecution as pedestal possible Rated insulation voltage Ui= 000V orrosion and maintenance free asy recyclable: no mouldedin metal parts Overview of the range imensional drawings Specifications for tender documents Power dissipation values Page.2 Page.22 Page.54 Page.74.4

52 PolySafe Multipurpose cabinets pplications ommercial Leisure (market places, camping sites, harbours for pleasure crafts, amusement parks), fuel stations, car washes, launderettes and laundries, service enclosures for construction yards, ndustrial Shipyards, mining, automotive, paper and pulp, food and beverage, petrochemicals, heavy industry, transformers, system monitoring, Utilities Water treatment plants, waste management, telecommunications, traffic signaling systems, traffic management, public transport, energy distribution (electricity, gas, water), cable television (TV), public lighting, railways,.5

53 nsulated wall mounting cabinets PolySafe Wall mounting brackets No mounting screws necessary an be mounted vertical or horizontal ackpanel nclosed in main structure as a seamless top panel as a result No inserts PUR sealing directly injected and responsible for high protection degree P65 Rainhood for outdoor use Up to P65, not necessary Possibility of ventilation through cutouts in top panel and air vents on side panels (to prevent internal condensation) Protection degree: P44/P54 in case of ventilation Mouldedin markings on the inside top panel shows the cutout and fixation points Neoprene gasket Preformed and premounted Side panels ntegrated into top and bottom Provide a very solid and stable construction Mounting frame n lu with standard horizontal lu profiles for all four widths Regulation in depth possible for all sizes Offering a complete solution (no more sawing necessary).6 loor mounting frame ase in polyester (height 65 mm) or anchoring the cabinet with the floor Mouldedin markings on the inside bottom panel shows the cutout and fixation points for anchoring Mounting plates Metal 2 mm Pertinax 5 mm Metal perforated 2 mm ixed (by means of ilo) as well as adjustable in depth for all sizes

54 Self tapping ilo screws (no inserts) or assembling main structure and fixation of the back panel Makes the cabinet easily dismantled for recycling PolySafe inges Mounted directly on the side panels, each step of 250 mm irect access outside the functional part of the cabinet Standard ergonomic operating handle Premounted on the door Suitable for all types of profile half cylinder locks (standard depth 40 mm/ alt. depth 45 mm) Possibility of padlocking (no access to unauthorised persons) oorlifter or bigger dimensions nsuring the door takes its center position during closing Multipurpose cabinets oor lush mounted Plain or glazed No inserts (ilo screws) nclosed in main structure as a seamless top panel as a result PUR sealing directly injected results in high protection degree P65 Opening angle 00 Standard 5 point latching mechanism Operated by one handle Provides secure closing (P65) oorstop Prevents stressing the door hinges caused by wind in outside use oor conducting or exact door positioning in the main structure.7

55 PolySafe ustomisation nsulated wall mounting cabinets abinet can be ordered with preformed cutouts to suit your application: ease and speed of mounting. Layout in compartments and internal separations as a flexible solution for the end customer (e.g. separation of distribution and instrumentation sections). oupling in depth by means of a depth extension kit (unlimited). abinet also available with inset polycarbonate window: visability of operating components, internal signalisation. oupling in height and width by means of a coupling kit (see accessories): ease of extension. abinet can be factory equipped and wired according to the customers requirements: ready to install and operate..8

56 PolySafe ustomisation Mounting applications abinet also available in kitform on demand: ease of transportation, space saving storage. Rainhoods our fixing points for securing rainhood are marked off in top panel. y drilling holes in the top panel and by fitting air vents ( ) on the side panels, the cabinet with rainhood will be efficiently ventilated. (P44) or extra depth or extra width, please contact us. Plinth nsulated wall mounting cabinets asily mounted in accordance with the enclosed instructions abinet can be provided with door on the front and at the rear: easy access, two different individual compartments. abinet can be supplied painted in other colours or with personal identification: environmental influence adaptation, ease of recognition, antigraffiti..9

57 PolySafe Multipurpose polyester cabinets nsulated wall mounting cabinets epth = 320 mm actoryassembled cabinet P65 K0 omplete with handle and wall mounting brackets of S 304 stainless steel (without cylinder lock) imensions ( x W) abinet with plain door abinet with glazed door (polycarbonate window) (P55) Weight (kg) abinet with door on the front and at the back PS x PS x PS x PS x PS x Mounting plate imensions ( 0 mm x W 0 mm) Sendzimir zinc coated sheet steel 2 mm Perforated 2 mm Pertinax 5 mm Pertinax 0 mm epth extension kit P65 To increase the standard depth 320 mm of the cabinet up to 640 mm. The kit consists out of two side panels, one top and bottom panel and two open backpanels Rainhood or an efficient ventilation (P44) in outdoor use by drilling holes in the top panel. s the standard enclosure is P65, a rainhood is not necessary. n case of extra width or depth, please contact us. Plinth or floor mounting frame. abinet and plinth are anchored together in the flooring = 65 mm daptor frame for Nbase mounting abinet and adaptor frame are anchored on the N base (polyester or concrete) Nbase or more information, see page Mounting frame in lu onsisting out of: four attachment brackets, two vertical profiles. orizontal profiles to be ordered separately, see.9 ontinuously adjustable djustable in steps of 2,5 mm Length of horizontal profile (mm)

58 PolySafe PS 352 PS 420 PS 430 PS 440 PS 442 PS 452 PS 530 PS 542 PS x x x x x x x x x Multipurpose cabinets () () ()

59 PolySafe ccessories nsulated wall mounting cabinets L Profile half cylinder locks Standard: = 40 mm L = 30,5 mm With 2 keys V With 2 keys 242 With 2 keys 455 With 2 keys With square key, 6 mm With square key, 8 mm With triangular key, 8 mm oor stop / anopy stop 00 opening angle of the door or the canopy Left turning Right turning With triangular key, mm With doublebit key, 3 mm Wall mounting brackets for standard cabinets (as replacement) andle or profile half cylinder locks Kit of four brackets for clip fixation at the rear of the cabinet. Made of stainless steel type 304 (as replacement) Wall mounting brackets for cabinets with rainhood andle or two profile half cylinder locks. or utility applications Kit of four special brackets for clip fixation at the rear of the cabinet. Rainhood Rainhoods for enclosure combinations. Standard rainhoods on page.20 Padlocking handle or padlocking (max. Ø 0 mm) epth adjustment kit Set of four brackets for depth adjustment of mounting plate (step 2,5 mm) x 320 mm 750 x 320 mm 2000 x 320 mm 2250 x 320 mm 2500 x 320 mm 500 x 640 mm 2000 x 640 mm 750 x 640 mm 000 x 640 mm 250 x 640 mm.22

60 PolySafe ccessories (continued) / J Pole mounting 500 mm width 750 mm width t the rear of the enclosure, profiles are mounted on the wall mounting brackets. round the pole, a steel holding band is installed. On the profiles, clamps are placed to fix the holding band securely. oupling kit P65 epth 320 mm nnerdoor P20 x W 500 x 500 mm 500 x 750 mm 750 x 500 mm 750 x 750 mm 000 x 500 mm 000 x 750 mm rame and door with 2 doublebit locks. or controls and automation applications. 9 /TS swing frame or direct fixing of 9 or TS modular chassis to the standard drillings. nsulated wall mounting cabinets Vertical and/or lateral coupling. Package includes the neopreen gasket, or cabinets x W = 500 x units 9 2 units TS or cabinets x W = 750 x units 9 22 units TS coupling bolts and nuts, and the protection profiles. = 320 = = 200 = or cabinets x W = 000 x units 9 32 units TS = / = = = 85 Ø9 (x4) or cabinets x W = 250 x units 9 42 units TS Metal frame: epoxycoating RL Ø9 (xj) 9 /TSprofiles: galvanised bichromated metal orner profile To fill up the corner between two coupled enclosures Length = 308 mm Use 2 profiles when coupling 4 enclosures lind coverplates for 9 /TS swing frames To fill up the remaining free space or cabinets x W = 500 x 750 eight of the coverplate = 32 mm or cabinets x W = 750 x 750 eight of the coverplate = 5 mm or cabinets x W = 250 x 750 eight of the coverplate = 28 mm Metal: epoxycoating RL 7035 Remark: not necessary for cabinet x W = 000 x

61 PolySafe ccessories (continued) nsulated wall mounting cabinets Louvre plate its on ventilation opening. Package includes 2 grids and 4 nylon nails. ir vents P44 Two air vents must be mounted per enclosure to ensure sufficient air circulation and prevent condensation water. omplete with template and screws. overplate Mounted in front of mounting plate or mounting frame PV sheet RL mm or cabinet (xw) 500 x 500 mm x 500 mm 750 x 750 mm 000 x 500 mm 000 x 750 mm 000x000 mm mm W 95 mm ir vents are preferably mounted in the upper and lower part of the enclosure. 250 x 750 mm Set of 2 pieces in polyamide. RL x000 mm Please refer to chapter for more ventilation options. Transparent sheet 3 mm or cabinet (xw) 500 x 500 mm Supporting chair or PS220 and PS or enclosures for temporary connections 750 x 500 mm 750 x 750 mm x 500 mm x 750 mm x000 mm x 750 mm x000 mm

62 PolySafe Notes nsulated wall mounting cabinets.25

63 PolySafe Modular framework for Nrail equipment P20 nsulated wall mounting cabinets escription 40 mod. xw = 500x mod. xw = 500x elivered in kitform ontent of the kit: 2 x support for left vertical profile 2 x support for right vertical profile 2 x vertical mounting profile 2 x insulated vertical cover for P20 2 x insulated horizontal cover for P20 all screws and nuts for assembly 2 rows 4 rows escription 80 mod. xw = 750x mod. xw = 750x escription 20 mod. xw = 000x mod. xw = 000x750 6 rows 7 rows escription mod. xw = 250x Modular functions and accessoires, see.27.26

64 PolySafe Modular functions for Nrail equipment (to be mounted on the modular framework) onsists of: Nrail coverplate with rectangular cutout accessories for assembly eight 50 mm Width Modules ( mod. = 8 mm) entre distance 50 mm 500 mm mm Modular functions for terminals or other equipment (to be mounted on the modular framework) onsists of: Nrails plain coverplate accessories for assembly Multipurpose cabinets eight Width entre distance 50 mm 500 mm 750 mm 50 mm mm ccessories (to be mounted on the modular framework) Metal mounting plates x W = 50 x 500 mm x W = 50 x 750 mm x W = 300 x 500 mm x W = 300 x 750 mm epth extension studs for metal mounting plates with 2 screws M5 x 0 ( set = 2 pieces) set Length (mm): set Length (mm): set Length (mm): set Length (mm): set Length (mm): set Length (mm): set Length (mm):

65 PolySafe ccessories for lu mounting frame nsulated wall mounting cabinets luminium profiles (mm) nclosure width 500 Profile length nclosure width 750 Profile length nclosure width 000 Profile length nclosure width 250 Profile length Profile length nclosure width 500 Profile length nclosure width 750 Profile length nclosure width 000 Profile length 968 Support for studs nsulated nut RL 7035 Screws Screw M6 with flange SW0 2 3 ex. 0 M nclosure width 250 Profile length Profile length 3000 Screw M6 x M6 Ø0 M nclosure width 500 Profile length nclosure width 750 Profile length nclosure width 000 Profile length nclosure width 250 Profile length Profile length Screw M6 in PV for coverplate (sealable) Nuts in metal M6 9 Ø M6 M Profile length 3000 ixing brackets M4 M6 M6 M M 0 4 M Ø

66 PolySafe ccessories for lu mounting frame (continued) 4 4 M6 M M 0, L L Nuts in PV M6 rackets L = 25 = 0 = 9, L = 40 = 24 = 9, L = 80 = 64 = 9, L = 20 = 64 = 49,5 = 4,5 Studs Type M4M6 L = 5 Type 2 M6M6 L = 5 L = 20 L = 25 L = 30 L = M6 M4 9,5 5 L 9,5 9 9 M6 M6 nsulated wall mounting cabinets L = 45 L = 55 L = L = L = 80 L = 00 L = Type 3 M6M6 L = L = L 2 M6 M6.29

67 PolySafe Mounting applications for lu mounting frame nsulated wall mounting cabinets ontinuously adjustable lu mounting frame M6 M6x2 M6 Use of coverplate M6x2 M6 M6 nsulated nut Stud type 3 Stud type 3 Stud type 2 M6x2 M6x2 Stud type 2 djustable lu mounting frame in steps of 2.5 mm racket racket M6x2 Note: Same way of mounting for coverplate as mounting plate M6 M6.30

68 ndustrial nclosures pplication guide / ecatalogue nsulated boxes.3 VMS (modular) nsulated wall mounting cabinets.26 ixorail Senior Wall mounting system enclosures Sheet steel distribution boards Pedestals Subterranean enclosures limate control eneral accessories eneral characteristics ndex.

69 ndustrial nclosures Overview wall mounting system enclosures Wall mounting system enclosures VMS (Modular) P x 220 x x 320 x x 320 x 79 ixorail Senior P4 650 x 300 x x 550 x x 320 x x 300 x x 550 x x 440 x x 550 x 20 x W x in mm.2

70 VMS Modular enclosure system pplications eatures Wall mounting system enclosures ndustry Public utilities Multi motor panels lectronic instrumentation Low voltage panelboards Standards N N N N V 0660 Teil 500 S 5486 Part pprovals Single boxes: types 2, 3, 3R, 3S, 5, 2 and 2K Modular system: types 2, 3, 3R, 3S, 5, 2 and 2K Modular system using : types 2 and 3R oxes with internal hinged cover: types 2, 5, 2 and 2K oxes with external hinges: type 2 The range consists of five boxes based on a 00 mm module. The innovative coupling concept allows easy, rapid assembly of any combination of units without the need for tools. The open bases offer excellent accessebility and wiring space for installation, mounting and cable connection, even after coupling. The side panel openings can be closed by either blind or combi end plates. Once mounted, end plates fit perfectly flush with the side panels of the base. ach large box is a multiple of a smaller one. ts fixing points in increments of 25 mm in bottom plate and top end are also a multiple of those of a small box. The base and end plates are made of light grey (RL 7035) glassfiber reinforced polycarbonate. The cover is made of either transparent or opaque light grey (RL 7035) polycarbonate. multiple of accessories like mounting plates, cover plates, depth extension frame,... makes the VMS a complete system for electrical distribution and control applications. VMS boxes are halogenfree, corrosion resistant and require no maintenance. VMS boxes provide optimum security to both operations and equipment because they feature total insulation and protection degree P65 according to and N This protection covers the total volume of the enclosure according to N and Overview of the range imensional drawings Specifications for tender documents Power dissipation values Page.2 Page.24 Page.55 Page.76.3

71 VMS oupling system Wall mounting system enclosures The enclosures are coupled by means of vertical dowels, inserted into the corner shafts. These dowels are universal to all sizes. ndplates installation ndplates, combi or blind, are snapped on from the outside and fixed by means of vertically inserted dowels..4

72 VMS Modular insulated enclosures system Modular enclosures system O O 2 ase O 0 O ombi endplate O 9 O 20 oupling clamp Transparent cover able endplate Universal support O 3 O 4 Opaque cover inged cover O 2 O 3 able stress release ridge O 2 O 22 Stress relieving cable clamp ixing bracket O 5 O 6 epth extension frame O 4 O 5 Partition plate O 23 O 24 ir vent O 7 O 8 Mounting plate in metal Mounting plate in pertinax O 6 O 7 usbar support Nprofile oupling set 2 x 220 mm O 25 Locking key lind cover plate Mounting rail 2 x 2 mm O 9 lind endplate O 8 oupling dowels.5

73 VMS Technical specifications Wall mounting system enclosures Protection degree according to individual and coupled with coupling set 2 x 220 with extension frame with cable entries with bridges Protection degree against external mechanical impacts according to N and base + end plates + covers hinged cover Materials bases + end plates covers cover screws gaskets Temperature resistance materials continuous use olours bases + end plates covers Protection Rated voltage Rated insulation voltage Rated current Rated short time withstand current Rated peak shortcircuit current Standards P65 P44 P65 P43 P55 K08 K07 reinforced fibreglass polycarbonate polycarbonate polyamide PUR, neoprene see page.6 20 up to +80 RL 7035 RL 7035 / transp. Total isolation 690V / 800V 690V max. 250 max. 30k (0.3 s.) max. 65k peak N N V 0660 T 500 S 5486 Part Recommended configuration for optimal modularity VMS 43 VMS VMS 63 VMS 64 VMS 32 VMS 32 VMS 33 VMS 43 VMS 63 VMS 32 VMS

74 VMS eatures and enefits Modular dimensions in increments of 00 mm in height and width, available in five sizes: 320 x 220 mm 320 x 320 mm 440 x 320 mm 640 x 320 mm 640 x 440 mm ssorted covers: transparent, opaque, or hinged, common design and depth. Time saving coupling by means of vertical dowels, inserted into corner slots. Modular enclosures system ndplates, combi or blind, are snapped on from the outside and fixed by means of vertically sunk keys. Once mounted, endplates fit perfectly flush with the side panels of the base. Rectangular mounting plates (2 mm in metal or 5 mm in laminated pertinax) with mounting set. Usable mounting depth is maximised and not dependant on plate thickness. Universal support for screwless and depth adjustable installation of component rails. The support is simply clicked over the base. ridges are inserted after connection of cables (320 and 440 mm sides). Universal cable entries and stress relieving cable clamps for cables up to Ø 75 mm can be located in any base on side 320 mm (for two cables) or on side 440 mm (for three cables)..7

75 VMS Modular system components Wall mounting system enclosures ase With four open sides Transparent cover With slotted screws Type x W x Pack. x W x Pack. VMS 32 VMS 33 VMS x 220 x x 220 x x 320 x x 320 x x 320 x x 320 x VMS 63 VMS x 320 x x 320 x x 440 x x 440 x Opaque cover With slotted screws x W x Pack. 320 x 220 x x 320 x x 320 x x 320 x x 440 x inged cover With double closure system 25 opening angle x W x Pack. 320 x 320 x x 320 x epth extension frame With fixing screws x W x Pack. 320 x 220 x x 320 x x 320 x x 320 x x 440 x Mounting plate Metal, 2 mm With mounting set Pertinax, 5 mm With mounting set x W x W 260 x x x x x x x x x x Plain cover plate nsulated material, 2 mm With mounting set Pack. x W Pack x x x x x

76 VMS ccessories ombi endplates Side (mm) haracteristics Metric Pack x M32/M x M / x M50/M x M25/M /0 3 x M50/M x M /0 7 x M /0 x M50/M x M32/M x M25/M /0 2 x M25/M /0 4 x M40/M x M /0 x M40/M x M25/M /0 x M50/M x M40/M x M25/M /0 lind endplates Side (mm) / /0 oupling key or base coupling Modular enclosures system /0 able entries Side (mm) /5 Ø max. of cable: 2 x 75 mm /5 Ø max. of cable: 3 x 75 mm able stress release Side (mm) /5 440 With one clamp Ø max. of cable: 75 mm /5 Locking pin or cable endplates (spare part) oupling set 2 x To couple 2 sides of 220 mm to one side of 440 mm With mounting accessories able clamp To mount on cable stress release Ø max. of cable: 75 mm oupling clamp or coupling in special cases ridges Side (mm) or large crosssection cables Universal support To fit: mounting plates (metal or synthetic) cover plates copper rail 5 x 3 copper rail 9 x 6.5 mounting rail 2 x 2 mm.9

77 VMS ccessories (continued) Wall mounting system enclosures Universal support Side 320 mm To fit: mounting plates (metal or pertinax) cover plates Nrails copper rail 5 x 3 copper rail 2x5/0 mounting rail 2 x 2 mm ixation screws to be used: (5x3) Symmetrical Nprofiles Side (mm) lways supplied with two universal supports Mounting rail 2 x 2 mm Side (mm) To fit connection terminal blocks lways supplied with two universal supports ranch terminals, see p..7 over screw Set of 4 pieces inge screw ase must be fixed prior to hinge installation Set of 2 pieces. inges n order to enable hinge mounting, holes must be drilled in the cover and in the base. Templates for drilling are supplied with each set. ach set consists of two hinges, screws, a drilling template, the mounting instructions and spacer shims. Set of 2 pieces. Thumb grip or cover screw or hinge screw. Set of 4 pieces. Partition plates Side (mm) or full compartimentalisation of coupled bases Wall fixing brackets Set of four brackets with screws Stainless steel or external fixing points irect fitting through the corner shafts of the base To be installed prior to extension frame or hinge installation Three optional mounting positions (0, 45, 90 ) Selftapping screws 5 x x 6 5 x or fixation in the base. 6 x x To fasten components to metallic mounting plates. lanking plate m or 45 mm cutout ir vent P nstall two air vents per enclosure to allow ventilation and prevent Marking strip Selfadhesive 8532 m condensation. Set of 2 pieces..0

78 VMS Preassembled units for panelboards Type VMS 32 VMS 33 VMS 43 VMS 63 VMS 64 nclosures for Nrail equipment ncludes: base with four open sides base frame with earth bar and coverplate transparent hinged cover (VMS 33 VMS 43) transparent cover with screws (VMS 32 VMS 63) 320 x 220 x 79 4 modules x 320 x 79 4 modules x 320 x modules x 320 x modules Modular enclosures system nclosures for Nrail equipment including endplates ncludes: base with four closed sides with combi end plates: top: 7 x M20 bottom: x M50/ x M40/ x 25/20 side: plain bare frame with earth connector and cover plate transparent pivoting cover (VMS 43) transparent cover with screws (VMS 32 VMS 63) 320 x 220 x 79 4 modules x 320 x modules x 320 x modules x 220 x x 320 x x 320 x 79 nclosures with.r.. fuse plates ncludes: base with four open sides mounting plate with.r.. bases transparent cover with screws 25 3 N 00 + N N 00 + N N + N () N 2 + N () uses are to be ordered separately N 3 + N () () To the functional units N /2/3 the mounting plate can be rotated 90, in the way that the enclosure can be coupled with the units LOS 4 ULOS /2 (side 440)..

79 VMS Preassembled units for panelboards Wall mounting system enclosures Type nclosures for loadbreak switches (ilos) and fuse bases ncludes: base with four open sides transparent cover with handle opening and screws extension shaft and operating handle for VMS 32:two Nrails with earthing (without equipment) for VMS 43 and VMS 63: mounting plate with threaded holes for loadbreak switches, fuse bases and earthing connectors VMS x 220 x 79 LOS 40/63/80 3P/4P + 27 / 33 M VMS x 320 x 79 LOS 63/80/00/25 3P/4P + 3 N 00 + N 8534 LOS P/4P + 3 N 00 + N VMS 63 VMS 64 Miniature circuit breakers, loadbreak switches and fuses are to be ordered separately nclosures for changeover switches (ilos/ulos) ncludes: base with four open sides mounting plate with changeover system (O) and earth bar transparent cover with handle opening and screws extension shaft and operating handle 640 x 320 x 79 LOS 25 3P/4P ULOS /63/00 3P/4P x 440 x 79 LOS 3 60/200/250/35 3P/4P ilos and ulos switches are to be ordered separately ULOS P/4P

80 VMS Preassembled units for panelboards Type nclosures for M's type Record Plus () ncludes: base with four open sides mounting plate with threaded holes and earth connector transparent cover with operating handle for moulded case circuit breakers transparent cover with operating handle and pushbuttons for moulded case circuit breakers with earthleakage device VMS 32 VMS 33 VMS x 320 x (+R) 3P/4P P/4P P/4P VMS x 320 x R 3P/4P R 3P/4P VMS 64 Wall mounting system enclosures The use of short or long terminal covers for the breaker is mandatory. reaker and terminal covers always have to be ordered separately. () Shortcircuit resistance 20k eff. at 440V.3

81 VMS Preassembled individual units Wall mounting system enclosures Type nclosures for loadbreak switches and fused disconnector loadbreak switches (ilos/ulos) ncludes: base with four open sides N rail with earthing connector (VMS 32) mounting plate with threaded holes and earthing connector (VMS 33 VMS 43) transparent cover with handle cut out and with screws extension shaft and operating handle Loadbreak switches and fused disconnector loadbreak switches are to be ordered separately VMS x 220 x 79 LOS 40/63/80/00/25 3P/4P VMS x 320 x 79 LOS 2 60/200 3P/4P LOS 3P/4P + 40/63/ ULOS /63/00 3P/4P VMS x 320 x 79 LOS 3 60/200/250/35 3P/4P ULOS P/4P VMS x 440 x 79 LOS 4 400/500/630 3P/4P ULOS 250 3P/4P ULOS P/4P Type VMS 32 VMS 33 VMS 43 VMS 64 nclosures with loadbreak switches (ilos) 320 x 220 x x 320 x 79 ncludes: base with four closed sides with combi end plates: top: side 220: 4 x P6 + x P42 bottom: side 320: 4 x P6 + 2 x P2 + 4 x P29 side 220: 3 x P29 side 320: 4 x P6 + 3 x P42 four pole loadbreak switch 660V transparent cover and screws extension shaft and operating handle LOS 63 4P LOS 25 4P LOS P nclosures with loadbreak switches (ilos) and fuse bases ncludes: base with four closed sides with combi end plates: top: side 220: 4 x P6 + x P42 bottom: side 320: 4 x P6 + 2 x P2 + 4 x P29 side 220: 3 x P29 side 320: 4 x P6 + 3 x P42 four pole loadbreak switch 660V partition plates between adjacent bases transparent cover and screws extension shaft and operating handle 320 x 220 x 79 LOS 63 4P + 3 fuse screw holders x 320 x 79 LOS 63 4P + 3 N 00 + N LOS 25 4P + 3 N 00 + N LOS P + 3 N 00 + N

82 VMS Supporting frame Wall mounting system enclosures ccessories Vertical Zprofile RL luzink L = 2360 mm, for 6 x luzink L = 2040 mm, for 5 x 320 ixation bracket or connection of vertical with horizontal profile luzink L = 080 mm, for 3 x luzink L = 760 mm, for 2 x 320 Screw M5 x 6 N 7500 TOR 4 2 orizontal profile Length = 2500 mm Stand support Left Length = 6000 mm Right

83 VMS Supporting frame Wall mounting system enclosures Wall mounting of small units can be made using stainless steel fixing brackets (see chapter J). or mounting and handling of units of more than five enclosures, a supporting frame is compulsory. The supporting frame consists of at least two horizontal profiles (= the length of the assembly width) and a number of two vertical profiles (equal to the number of vertical sections +). f the unit height is greater than 000 mm, three horizontal profiles will be used. The vertical profiles are 40 mm longer than the height of the assembled panel. The frame and the enclosure assembly should be mounted simultaneously. orizontal and vertical profiles of the first row of enclosures are assembled together by clamping brackets and sliding nuts. The next clamping brackets are mounted on the horizontal profile. ccessories luminium profile x 7 x 3 mm Length = 3 m rame clamping brackets omplete with 2 bolts and 2 M8 sliding nuts. or clamping top and bottom horizontal profiles to vertical profiles. lamping plate omplete with screw and M8 sliding nut. or fitting the enclosures onto vertical profiles of the frame. Wall mounting bracket The first row of enclosures is then mounted on the vertical profiles with the clamping plates. ollowing rows are then assembled the same way. olt M6 x 2 N To fit clamping plate on the enclosure rame and enclosure assemblies are mounted simultaneously..6

84 VMS Notes Wall mounting system enclosures.7

85 VMS usbar system Wall mounting system enclosures Universal busbar system KM approved according to N orizontal configuration Parallel configuration ccessories orizontal configuration 25/250 Parallel arrangement Parallel arrangement 630/ orizontal configuration 25/250 Parallel arrangement 400.8

86 VMS usbar system orizontal configuration Parallel arrangement Rated nominal current n 25/60 usbar supports Pack entre distance of phase bars (mm) istance between N or bar and 50 adjacent phase bar (mm) usbars for phase bar for bars N Pack for length 3 m Number and dimensions of phase bars x (2 x 5) (L L2 L3) Number and dimensions of bars N Total phase section (mm 2 ) x (2 x 5) 60 Total section N (mm 2 ) 60 haracteristics entre distance of busbar supports (mm) ynamic shortcircuit resistance (k peak) Thermal shortcircuit resistance (k eff.) orizontal configuration x (2 x 0) x (2 x 5) x (2 x 5) x (2 x 5) x (2 x 5) 2 x (2 x 5) x (20 x 5) 2 x (2 x 5) x (20 x 0) 2 x (20 x 5) /290 43/54 20/ x (20 x 5) 2 x (20 x 5) /290 40/ / x (30 x 0) 2 x (30 x 5) x (30 x 5) 2 x (30 x 5) Modular enclosures system onnection with flat copper onnection with cable directly on copper 2 x 5 / 2 x 0 ranching Main bar Total thickness of bar width width clamped bars (mm) Main bar able section (mm 2 ) lamp width (mm) (mm) Min. Max. lamp able clamp Min. Max. (mm)

87 VMS Parallel arrangement Wall mounting system enclosures onnection with flat copper or cableshoe to bars onnecting block or flat copper with widths 25, 30 or or flat copper with widths 20 or or flat copper with widths 5 or onnection for cables mm2 to bars Wing contactblocks olts or 5 mm thick bars M0 x olts or 5 mm thick bars M0 x M0 x M0 x or 0 mm thick bars M0 x or 0 mm thick bars M0 x M0 x M0 x b s x L b s x L Legend b: height of the rectangular bars s: height of the horizontal, rectangular bars or of the connection with cables or flat copper x: minimal required bolt length L: length of the fitting hookbolt able clamps for mounting on to wing contactblocks able section (mm 2 ) lamp width Min. Max. (mm)

88 VMS Mounting instructions Mounting of the pivoting doors oupling of the bases O O2 Set the two bases against each other ouple with dowels oupling of two 220 mm bases to one 440 mm base nstall the door locking screws on the door frame with self tapping screws. Protection degree: P43: door locking screws open P65: door locking screws closed nd plate installation Modular enclosures system O O2 Position the end plate in the base opening bottom. Snap the plate completely in the opening. Lock the end plate by means of two locking pins. O O2 O3 nstall the bridge (a) in the 440 mm side. xact location is defined by the slots ouple the bases with the four dowels Snap coupling clamps in the openings below the upper base lip able gland installation in the combi end plate over installation O O2 O3 Snap the screws in the four cover corners. The screws are then captive. it the cover on the base (one turn on screws, max. 2.5Nm). f necessary, stick the total isolation symbol on the cover..2

89 VMS Wall mounting system enclosures nstallation of depth extension frame O Snap the screws frame corners. The screws are then captive O2 Tighten the frame onto the base with the screws. nstallation of the stress relieving cable clamp nstall the stress release support with the four self tapping screws. nstall the stress release clamps in the sleeve. Lock with the bolt and nut. nstallation of the bridge or the extension frames with 640 mm side, additional fixation with two self tapping screws. Mounting of the cable end plates O O2 O3 ut the top base lip following the marks. Side 320 opening is 220 mm. Side 440 opening is 320 mm. nstall the end plate in the channel of the base bottom, then press against the side wall. Lock with the locking pins. nsert the rubber cable entries in the end plates. O O2 O3 ouple the two bases with dowels. ut the top adjacent side lips following the markings. Stick the selfadhesive gasket and press it into the bridge gutter. nstall the bridge between the two bases..22

90 VMS nstallation of the universal support apabilities of the universal support nsert the universal support on the base insert. Simultaneously fit the support on the inner lip. Press completely. Unlocking the universal support Modular enclosures system Press the locking latch towards the bottom. Lift the support. Metal mounting plates (a) or pertinax plates (b) opper rails 5 x 3 lat bar 2 x 2 mm Symmetrical Nprofile.23

91 VMS nstallation of the mounting plates nstallation of the partition plates Wall mounting system enclosures O Rotate the screws one turn in each support. O2 nsert the four supports in the mounting plate slots. O3 nstall the plate with the supports in the bottom of the base. O4 Tighten the screws. nstallation of the cover plates nstall the partition plate between the two bases to be coupled. The plate must be mounted with the slots on the top. nstallation of the hinges O O2 Snap the four supports on the base inner lip. nstall the four quarterturn fasteners on the cover plate. it the cover plate on the supports by turning the fasteners. nstallation of the air vents efore the hinge installation, install the mounting brackets on the base, or install the enclosure on the wall or on the supporting frame. ntroduce the hinges in the screw holes of the cover. nsert in the base corners. Turn the screw until locked (360 ). nstallation of the mounting brackets rill a Ø 9 mm hole, install the air vent and screw the nut. it the brackets in the proper orientation (0, 45, 90 ). Screw through the base corner holes..24

92 VMS nstallation of the busbar support efine the required rated current. nstall the busbar supports on the fixing points located in the base bottom. Tighten with two screws. ntroduce the copper bars in the support and set with the reversible top plate and four screws. 25 / 250 horizontal 630 parallel Modular enclosures system 250 parallel 250 parallel 400 parallel ixing upper part busbar support.25

93 ixorail Senior Type tested distribution cabinet Wall mounting system enclosures pprovals/marking pplications s an elegant insulated cabinet in: restaurants and hotels workshops hospitals shopping centers offices commercial buildings leisure and sport locations eatures Secure: total insulation Protection degree: P43K08 ouble wall: a sheet steel outer wall plus an inner insulated extruded wall Universal: for Nrail equipment up to 92.5 mm nstallation friendly: ample wiring room and a removable mounting frame lexible cable entries, integrated in the base omponents The ixorail Senior cabinet includes: base in RL 906 mounting frame labels for circuit indication coverplates a transparent or grey door in RL 906 closed by handle without lock sealing option Overview of the range imensional drawings Specifications for tender documents Power dissipation values Page.2 Page.28 Page.56 Page.77 Plain door Transparent door ixorail Senior x W x 650 x 300 x x 300 x x 550 x x 550 x x 550 x x 300 x x 300 x x 550 x x 550 x x 550 x 20 Number of modules Number of rows Pack..26

94 ixorail Senior ccessories 4 pole terminals 63 Plain plate Rail section 6.5 x 9 4 pole terminals With cover for Nrail mounting 4 pole terminals Rail section 2 x 5 Shortcircuit capacity 35k peak 0 ms Predrilled plates 7 x P3, x P2 P48 / 2 x P3,5 2 x P29 / 4 x P3,5 Label for circuit indication or enclosure width 300 mm 2 Type tested distribution cabinet or enclosure width 550 mm Protective shroud or 60 terminal 6002 ocument pocket arth bar or enclosure width 300 mm or enclosure width 550 mm lank plate 856 N 4 W x = 325 x 80 mm N 5 W x = 55 x 225 mm Locking device 8505 daptor kit + nsert 3 mm double bit 8327 The standard handle can be replaced by adaptor + insert or handle m or screening off rectangular openings or cut out of 45 mm Key to be ordered separately 8326 nsert 8 mm triangle daptor kit = + + Key to be ordered separately 8325 nsert 8 mm square Key to be ordered separately 833 ilinder lock with 2 keys V2432 Neutral handle 8346 andle with key on V

95 ndustrial nclosures Notes Wall mounting system enclosures.28

96 Modula 630K Wall mounting system enclosures pplication guide / ecatalogue nsulated boxes nsulated wall mounting cabinets.2 Modula 630K Wall mounting system enclosures.27 Modula Plus Sheet steel distribution boards Pedestals Subterranean enclosures limate control eneral accessories eneral characteristics ndex.

97 Modula 630K Overview wall mounting system enclosures Modula 630K P4 Modula Plus P30/P55 Sheet steel distribution boards 545 x 600 x 220/ x 900 x 220/ x 600 x 220/ x 900 x 220/ x 600 x 220/ x 900 x 220/ x 650 x 500/ x 900 x 500/ x 050 x 500/ x 600 x 220/ x 900 x 220/ x 600 x 220/ x 900 x 220/ x 300 x 500/ x 600 x 220/ x 900 x 220/ x 600 x 220/ x 900 x 220/ x 600 x 220/ x 900 x 220/ x 600 x 220/ x 900 x 220/ x 600 x 220/ x 900 x 220/250 x W x in mm.2

98 Modula 630K Type tested distribution board pplications eatures Wall mounting system enclosures Type tested distribution board in industrial and commercial markets Standards N pprovals Lovag elivered in kit form orm and orm 2 asy wiring, due to the direct mounting of the functional units on the rear panel, used as a mounting plate Protection level Without door P40 K07 With plain door P4 K08 With transparent door P4 K07 Material used Sheet steel coated with ovenbaked epoxy paint oors, side panels and roof: mm thick Upper/bottom panels and bases: 2 mm thick Sendzimir zinc plated steel Rear panel:.5 mm thick oupling kit: 2 mm thick olours RL 7035: enclosure, doors and protective covers RL 7024: bases lectrical characteristics Rated voltage: 690V 40/60z Rated current: max. 630 Rated short current cw: max. 30k ( sec.) Rated peak shortcircuit current pk: max. 60k peak imensions Overview of the range Page.2 eight: 545 to,90 mm Width: 600 or 900 mm epth: 220 mm (250 with the door) Usable width: 500 mm imensional drawings Specifications for tender documents Page.29 Page.57 Power dissipation values Page.78.3

99 Modula 630K Sheet steel distribution boards Modula 630K is a wallmounted sheetmetal enclosure supplied in kit form which is particularly suited for setting up switch and lowvoltage distribution boards in the services and industrial sectors. ue to its modularity and simplicity, Modula 630K offers numerous practical advantages to facilitate mounting and wiring operations, i.e. ultraquick assembly, optimised functionality, userfriendliness and timesaving connection or handling. The rear panel comprises all the functional construction components. Modula 630K has been designed to allow direct mounting and wiring of the functional units on the back panel and to provide access to the equipment, terminals and busbar system from all sides. Top, side and cover panels can be easily installed later in the workshop or onsite. The system is made of sheet steel and is protected by a coating of epoxy paint (colour RL 7035). The enclosures are available in two widths (600 and 900 mm) and six heights (from 545 to 295 mm), increasing in increments of 50 mm. Supplied in spacesaving kit form, the enclosures can be assembled in a few minutes using a few screws. The cable or busbar compartment is included in the 900 mm wide enclosure. ll components are mounted on the sheetmetal rear panel. The compartment can be positioned on the left or right as wished when the enclosure is being installed. Protective covers and/or doors made of mm thick sheet steel are coated with an attractive, safe epoxy paint (colour RL 7035)..4

100 Modula 630K The KT form saves storage and transport space. The.5 mm thick steel rear panel is equipped with 8 mm diameter holes at distances of 25 mm. The sendzimir zinc plated steel, which complies with M regulations, ensures improved earthing. n ingenious system of grooves makes it possible to fix the side panels on the rear panel without screws being needed. Type tested distribution board robust assembly is achieved using only four screws after the side and roof panels have been fitted. Protective covers with openings for 27 modules (of 8 mm each) are fitted directly onto the side panels. Opaque or transparent doors which open to the right or the left are equipped with a cylindrical lock (type V2432) as a standard feature. usbar/cable compartments can be easily installed on the right or the left of the enclosure. The installation of the (up to 630 ) busbar system at the back of the enclosure and/or in the cable compartment ensures that generous wiring space is available. The roof and base are equipped with 3mm thick rigid PV wire accesspanels (colour RL 7035). These are easy to remove and handle..5

101 Modula 630K orm orm 2 ccording to N and ccording to N and Sheet steel distribution boards No compartment No separation between the enclosure, busbar system, functional units and terminals With Modula 630K 600 mm wide individual enclosure 900 mm wide enclosure with integrated cable/busbar compartment without partition The busbar system is protected from the functional units With Modula 630K 900 mm wide enclosure with integrated busbar compartment with separation between busbar compartment and functional units The separation screen is made of 3 mm thick, halogen free polyester. The openings are easy to break out, for the passage of cables, u, flexible brass,... With preservation of P20 asy to place with the help of simple wirecutters separation orm 2 horizontal separation screen or functional unit and cable/busbar compartment, e.g. n cable/busbar compartment: separation between incoming feeder and busbar Separation between Main switchboard and Secure switchboard Separation between electrical distribution (igh voltage) and data / telecom (Low voltage).6

102 Modula 630K Range imensions ndividual enclosures Stacked units asic height (mm) ,45,295 Usable height (mm) ,050,200 Maximum number of 8 mm modules Type tested distribution board Stacked enclosures

103 Modula 630K ndividual enclosures 600 mm width P40 K07 With cable entry plates Sheet steel distribution boards = + or Without cable entry plates x W x * (mm) 545 x 600 x x 600 x x 600 x x 600 x 220,45 x 600 x 220,295 x 600 x 220 * 250 mm deep with door Usable height (mm) No. of stacked units of 27 mod. 3 (8 mod.) 4 (08 mod.) 5 (35 mod.) 6 (62 mod.) 7 (89 mod.) 8 (26 mod.) back panel + 2 sides = roof + bottom With cable entry plates or Without cable entry plates oors The doors are delivered with a cylindrical V2432 type lock Specifications of the doors elivered with a cylindrical V2432 type lock Protection degree Opaque door: P4 K08 Transparent door: P4 K07 Number of stacked units of 27 modules 3 (8 mod.) 4 (08 mod.) 5 (35 mod.) 6 (62 mod.) 7 (89 mod.) 8 (26 mod.) Opaque door P4 K Transparent door P4 K imensions Page.29.8

104 Modula 630K ndividual enclosures 900 mm width P40 K07 With cable entry plates = + or Without cable entry plates Type tested distribution board x W x * (mm) 545 x 900 x x 900 x x 900 x x 900 x 220,45 x 900 x 220,295 x 900 x 220 * 250 mm deep with door Usable height (mm) No. of stacked units of 27 mod. 3 (8 mod.) 4 (08 mod.) 5 (35 mod.) 6 (62 mod.) 7 (89 mod.) 8 (26 mod.) back panel + 2 sides = roof + bottom With cable entry plates or or Without cable entry plates oors Two doors width Specifications of the doors elivered with a cylindrical V2432 type lock Protection degree Opaque door: P4 K08 Transparent door: P4 K07 Number of stacked units of 27 modules 3 (8 mod. + compartment) 4 (08 mod. + compartment) 5 (35 mod. + compartment) 6 (62 mod. + compartment) 7 (89 mod. + compartment) 8 (26 mod. + compartment) Opaque door Transparent + opaque door imensions Page.29.9

105 Modula 630K Stacked enclosures 600 mm width P40 K07 Type of stacking inges on left inges on right x W x * Total number of stacked units Sheet steel distribution boards omposition 5 stacked units 4 stacked units 5 stacked units 4 stacked units 5 stacked units 5 stacked units 460 x 600 x x 600 x stacked units 5 stacked units 2 bases and 4 sides 2 6 stacked units 5 stacked units 760 x 600 x stacked units 6 stacked units Roof and bottom 90 x 600 x stacked units 6 stacked units stacked units 6 stacked units onnection kit * 250 mm deep with door.0

106 Modula 630K Stacked enclosures 900 mm width P40 K07 Type of stacking inges on left inges on right x W x * Total number of stacked units omposition 5 stacked units 4 stacked units 5 stacked units cable compartment cable compartment cable compartment cable compartment cable compartment cable compartment 4 stacked units 5 stacked units 5 stacked units 460 x 900 x x 900 x Type tested distribution board 5 stacked units cable compartment cable compartment 5 stacked units 2 bases and 4 sides 2 6 stacked units cable compartment cable compartment 5 stacked units 760 x 900 x stacked units cable compartment cable compartment 6 stacked units Roof and bottom 90 x 900 x stacked units cable compartment cable compartment 6 stacked units stacked units cable compartment cable compartment 6 stacked units onnection kit * 250 mm deep with door.

107 Modula 630K Stacked enclosures Sheet steel distribution boards oors 600 mm width elivered with two cylindrical V2432 type locks Protection degree: Opaque P4 K08 Transparent P4 K mm width 2 doors ( mm) Type of stacking Number of stacked units Opaque door Transparent door Opaque door Transparent + opaque door or or ases 600 mm width 900 mm width eight = 00 mm eight = 00 mm eight = 200 mm eight = 200 mm

108 Modula 630K onfiguration alternatives ndividual enclosures 600 mm wide individual enclosure with 3 to 8 stacked units comprising 27 modules each. 900 mm wide individual enclosure with 3 to 8 stacked units comprising 27 modules each with incorporated cable compartment. Wall mounting brackets. 00 mm or 200 mm high base for placing the panel on the ground. Opaque or transparent door. Stacked enclosures with two individual doors 600 mm wide enclosures. 900 mm wide enclosures with incorporated cable compartments. Wall mounting brackets (2 sets). 00 mm or 200 mm high base for placing panel on the ground. ndividual doors ( opaque or transparent door per enclosure). 600 Stacked enclosures with a single door for full height of the unit 600 mm wide enclosures with 9 to 2 stacked units comprising 27 modules. 900 mm wide enclosures with 9 to 2 stacked units comprising 27 modules and incorporated cable/busbar compartment. onnection kit. 00 mm or 200 mm high base for placing the system on the ground. single opaque or transparent door. 600 Type tested distribution board L xample nclosure Wall mounting brackets oor ase xample 600 mm wide 6stacked unit enclosure nclosure Transparent door mm wide 6stacked unit enclosure nclosure Opaque door Wall mounting brackets ase xample 600 mm wide 6stacked unit enclosure nclosure mm wide 6stacked unit enclosure nclosure Opaque door for 2 stacked units ase 2 stackedunit connection kit

109 Modula 630K oupling in width Sheet steel distribution boards oupling set for width 3 up to 8 rows Set of 2 open side walls oupling set for width () / () Undepending in height Rows

110 Modula 630K oupling set for width 0 and 2 rows Set of 2 open side walls Type tested distribution board oupling set for width () 200 / 500 / 800 = 60 (0 rows) = 90 (2 rows) () Undepending in width Select your enclosure on page.34 and.35. Order the additional coupling sets. /W 0 rows + 2 rows x x x x x x x x x x x x Rows

111 Modula 630K unctional units Modular equipment Moulded case circuit breakers Loadbreak switches Sheet steel distribution boards or 27 modules of 8 mm eight = 50 mm (<63) eight = 200 mm (<63) or use of Moduclic (see page.42) or 3P/4P devices Vertical mounting Record Plus & type 3/4P 60 (4 dev.) (2) 250 3/4P 250 (3 dev.)450 3/4P R (3 devices) (3) 600 Record Plus type 3P 630 ( device)600 4P 630 ( device)600 3P R ( dev.)600 4P R ( dev.) orizontal mounting (mm) ilos 3 250/ ilos 4 400/ Vertical mounting (mm) ilos 3 250/ ilos 4 400/ eight = 200 mm (Moduclic) or M25 and ilos 40/60 () Terminals orizontal mounting Record Plus & type 3/4P /4P 60 + R (3) 250 3/4P /4P R (3) 200 3P = 50 mm one horizontal row With a 4 x 60 terminal L = 200 mm = 50 mm Note: use an additional protective cover (ref ) for connections if >63 llpurpose mounting plate = 300 mm three vertical rows arth bar (option) Plate = 40 x 490 mm M4 nut M5 nut M6 nut () n case of a functional unit for M s together with a function (Moduclic) we recommend the use of one or two blind cover plate(s) of 50 mm (880655) as extra connection space. (2) Without R With R: 2 devices 3/4 P (3) Without adaptor plate..6

112 Modula 630K unctional units for cable compartment Modular equipment Terminals Visual switch or 2 rows 2 x 8 mm modules per row = 300 mm Moulded case circuit breakers or 3P/4P M s Vertical mounting Record Plus type (mm) 3/4P /4P Loadbreak switches ilos /2 300 ilos 3 250/ Terminals in cable compartment, one vertical row L = 490 mm arth bar 2x5 bar 24 threated holes M5 L = 490 mm (option) onnectors + screws M5 x 3 Max. 2 x 0 mm 2 per connector ombination of ilos 3 (35) with M 60/250 Record Plus type* Type tested distribution board or use a blind coverplate =50 mm as cable incoming space *With u connexion 60 onnection 250 on request istribution terminal for Record Plus specially designed to allow the use of the moulded case circuit breaker Record Plus frame as a mains device with cables distributing the load over multiple outgoing circuits (or lines of multiple outgoing circuits). The terminals are available as a three or four pole set allowing the line or load side of the breaker to be equipped. The sets consist of a number of fully insulated single pole units that can be assembled into a multipole distribution block before they are mounted on the breaker. rame size 60/250 xternal connectors No. of conductors max. 6 onnector 6 copper cable cores 2.5 mm 2 up to 35 mm 2 Set for equipping the line or load side of a breaker Size of conductors 4 x mm 2 2 x mm 2 Set 3 pole Set 4 pole Strippable length 2 mm 2 mm Maximum torque on lug bolt 6 Nm 3 Nm

113 Modula 630K Moduclic busbar system Sheet steel distribution boards Moduclic is a secondary busbar system of 250, 660V~ 60k peak. Moduclic is an incoming busbar for modular devices and this as well for M s as for comfort functions. The Moduclic is mounted directly on the Nrail and is independent the type of system enclosure: Modula or VPSystem. The main advantage of the Moduclic is the safety aspect (P20): adding or removing electrical circuits in a panel board without disconnecting the power. ll outgoing circuits stay in the operational function, due to the fact that all operations are done using the insulated lick connection, without touching the parts on tension, even not when using an insulated tool. Standard connections of 6 mm2 (up to 40) are shipped with the Moduclic. The Moduclic busbar system is suitable for integration in all system enclosures conform to modules 3P + 2N P20 LK max. Range P+2N + cables 3P+N 8 black cables 6 mm 2 6 blue cables 6 mm P+2N + cables mono 2 black cables 6 mm 2 2 blue cables 6 mm P+2N no cables ables with furelle L f black cables 6 mm 2 20 mm blue cables 6 mm 2 20 mm black cables 0 mm 2 20 mm blue cables 0 mm 2 20 mm Stripped cables black cables 6 mm mm blue cables 6 mm mm black cables 0 mm mm blue cables 0 mm mm ables for 2 x 4P M s 6 black & 2 blue cables 6 mm 2 20 mm cables 0 mm 2 20 mm cables 6 mm mm cables 0 mm mm ables for 4 x 2P M s 4 black & 4 blue cables 6 mm 2 20 mm cables 0 mm 2 20 mm cables 6 mm mm cables 0 mm mm Plugs plugs.52.5 mm2 blue plugs 46 mm2 yellow Mounting On Nrail (step = 200 mm) 200 MOUL MOUL mm irect on busbar (step = 200 mm) 200 MOUL ncomming connections able max. 70 mm ,2 x 9, lexibar 3 x 20 x 70.8

114 Modula 630K Terminals arth/neutral bar 2 x 5 bar; L =.2 m 63 threaded holes M connectors and screws 2 x 5 bar; L = 490 mm 24 threaded holes M5 onnectors + screws M5 x 3 Max. 2 x 0 mm 2 per connector (ref. 6007, 8258) 4P terminals (N rail mounting) 63 4 pole terminal x 9 mm bars for 63 nominal P terminals (for installation on metal section) 4 pole terminal with protective shroud 35k peak; u 20 x 5; L = 200 mm nput: 2 x M8 Output: 4 x M6 Lxx = 230 x 50 x 70 mm Type tested distribution board 2 x 4 bar; L = 475 mm connector 35 mm 2 20 connectors 6 mm 2 2 fixation clips M6 ixation clips M6 Set of 20 pieces pole terminal with protective shroud 2k peak; u 0 x 6; L = 80 mm able input: 6 mm 2 Outputs: 8 x 0 mm 2 Lxx = 88 x 85 x 48 mm 4 pole terminal with protective shroud 30k peak; u 0 x 6; L = 20 mm able input: 25/35 mm 2 Outputs: 4 x 6 mm 2 7 x 0 mm 2 Lxx = 26 x 85 x 48 mm 60 4 pole terminal with protective shroud 44k peak; u 32 x 5; L = 275 mm nput: x M0 Output: 8 x M6 Lxx = 300 x 240 x 40 mm lexible connectors onnection with bolt/nut on flat copper onnectors 6 mm Set of 20 pieces onnectors 35 mm 2 Set of 20 pieces pole terminal (20 connectors) 35k peak; u 2 x 5; L = 26 mm able input: 0 mm 2 Outputs: 8 x 0 mm 2 Lxx = 26 x 80 x 52 mm Protective shroud or 60 terminal x 3 x 0.5 L = 2 m 60 2 x 20 x L = 2 m x 20 x L = 2 m x 32 x L = 2 m

115 Modula 630K usbars connectors Vertical or horizontal mounting () 250 busbar holders (2) 400 busbar holders (2) 630 busbar holders (2) Sheet steel distribution boards 250, 4P for 2 x 5 u bars or enclosure or cable/busbar compartment (2) 250, 4P for 20 x 5 u bars or enclosure or cable/busbar compartment (2) up to 630 or enclosure 250 for 20 x 5 u bars 400 for 32 x 5 u bars 630 for 30 x 0 u bars or cable compartment (3) Remark: only one piece opper bars opper bars opper bars 2 x 5 mm u 250 (5k eff. 0.3 s.) 2 x 5 bar M5 threaded hole Length = 958 mm x 5 mm u (5k eff. 0.3 s.) Set of 3 edgewise bars and 20 x 5 flat bar with M5 threaded holes Length = 300 mm 20 x 5 mm u (30k eff. s.) Set of 4 u bars 20 x 5 bars with threaded holes M6 2 x 5 mm u 250 (5k eff. 0.3 s.) 2 x 5 bar Plain Length = 3 m x 5 mm u (5k eff. 0.3 s.) Set of 3 edgewise bars and 20 x 5 flat bar with M5 threaded holes Length = 450 mm 20 x 5 mm u 400 (20k eff. 0.3 s.) 20 x 5 flat bar Plain Length = 3 m x 5 mm u (30k eff. s.) Set of 4 u bars 32 x 5 bars with threaded holes M6 30 x 0 mm u (30k eff. s.) Set of 4 u bars 30 x 0 bars with threaded holes M8 Protective shroud 530 x 00 mm 530 x,000 mm astener bolts () Shortcircuit behaviour given a maximum distance of 300 mm between the holders (2) Set of two pieces, fixation accessories included (3) an also be used as an individual support with mounting accessories M6 x 6 (40 pieces bag) M8 x 20 (40 pieces bag)

116 Modula 630K Staircase busbar holders 630 Set of 4 holders busbar holder With protection shroud P Protection shroud for staircase busbar holder ront rontal protection shroud L = m ront + lateral Protection shroud ront + lateral L = m Separation screen orm 2 Vertical 900 mm wide enclosure with integrated busbar compartment with separation between busbar compartment and functional units The separation screen is made of 3 mm thick, halogen free PV RL 7037 asy to place with the help of simple wirecutters P20 eight 3 rows 4 rows 5 rows 6 rows 7 rows 8 rows orizontal Type tested distribution board W = 600 mm or functional unit Without protection shroud Top + bottom Protection shroud Top + bottom W = 300 mm or cable compartment With Moduclic functional unit (p..42).2

117 Modula 630K nclosure accessories Sheet steel distribution boards Plain protective cover Stacked eight unit (mm) With screw and nut olour = RL Recessed, for 30 mm extra space equipment behind door With 45 mm cutout Nrail Length = 493 mm epth extension brackets Set of two pieces + screws + clips ixed eight = 87 mm djustable djustable from 5 to 0 mm ixation bracket obtuse angle support for Nrail at 45 ; height = 55 mm Plain protective covers for busbar/cable compartments Wall mounting brackets Set of 4 pieces Lighting unit ableaccess plates Plain plate Predrilled plate 7 x P Predrilled plate x P 2 P 48 2 x P x P 29 4 x P

118 Modula 630K eneral accessories dhesive band for circuit indication Width (mm) * * with protective cover Strips or 45 mm cutout sections Length = 72 mm ivisible into multiples of 9 mm Length = m ocument pocket 856 N 4 W x = 325 x 80 mm N 5 W x = 55 x 225 mm Security lock keyset comprising two keys (without a cam) Support for cable duct Set of 0 pieces for vertical positioning Wiring supports abletray support set of 20 pieces abletray set of 0 pieces ags of screws ag of 30 M6 slotted head screws for the metal support ag of 50 M6 clips ag of 0 M5 screws for protective cover with captive lock washers ag of 50 clips M5 Type tested distribution board able support Set of two pieces + screws + clips or cable compartment or 600 mm wide enclosure.23

119 Modula 630K omposition unit xample uide for calculating the space required for the unit and its components Step 3: Outgoing feeder modules O2 Sheet steel distribution boards 0k peak crête m Record ROR ,03 8x 5x 2x x 20% Step : ncoming feeder Select the functional units from those shown on page.42:. Record M + differential system = 250M 2. eight in mm eight = 50 mm O x Step 2: usbars at the back of the enclosure alculate the total number of 8 mm modules necessary: 8 x 2P 0/0,03 = 8 x 4 mod. = 32 5 x 2P 6 = 5 x 2 mod. = 0 2 x 4P 32 = 2 x 4 mod. = 8 x 4P 25 = x 6 mod. = 6 Total number of modules = 56 Reserve space calculation dd the required reserve space (e.g. 20%) O3 to that of the outgoing feeders = 56 x 0.2 =.2 2 mod. Number of stacked units dd the outgoing and reserve space modules and divide by (56+2)/27 = 68/27 = stacked units. ind the reference for the appropriate enclosure on page.34. Select the 50 mm function if you do not use cable trays or 200 mm when using cable trays, current exceeding 63 or when using Moduclic. This means x 200 mm (height = 200 mm) 2 x 50 mm (height = 300 mm) Step 4: nclosure x x2 Usable height = 750 alculate the busbar requirements on the basis of the details given on page.46 as follows: 250 holder = 2 x 4P holders 250 bar = 4 lengths of 2 x 5 mm x x4 dd the height of the incoming feeder (50 mm) to the height of the outgoing and reserve units (500 mm) = 650 mm and select the enclosures whose usable height is equal to, or exceeds this height 750 mm = x x Select the opaque covers for the reserve space: = 00 mm = (2 x 50 mm) x2.24

120 Modula 630K Option : oor usbars orizontal or vertical mounting f a door is necessary, please decide whether you would like an opaque or transparent door x Option 2: nclosure with cable compartment xample of mounting Type tested distribution board The cable compartment is incorporated in the basic 900 mm wide enclosure. Where necessary, select an enclosure with a usable height of 750 mm x x dd the (transparent) door x and the protective cover for the cable compartment x usbars, see p

121 Modula 630K Notes Sheet steel distribution boards.26

122 Low voltage distribution boards Modula Plus pplications Standard application Sheet steel distribution boards ndustry igh commercial Low commercial Standards N part Protection degree With door P55 Without door P30 (equipped with functional units and coverplates) Protection class arthing, protection class eeder ir circuit breaker from 400 up to 4000 fixed or withdrawable Loadbreak switches up to 2500 fixed, fused or fuseless Moulded case circuit breakers up to 600 fixed or plugin Outgoing circuits Moulded case circuit breakers up to 600 fixed or plugin Loadbreak switches up to 2500 fixed, fused or fuseless Miniature circuit breakers Material abinet structure sheet steel, thickness mm xternal panel sheet steel, tickness.5 mm, powder coated oors sheet steel, thickness 2 mm, powder coated olour xternal panel RL 7035 overplates RL 7024 oors RL 7035 esign doors RL 7035 and RL 7024 Technical data Overview of the range imensional drawings Specifications for tender documents Page.2 Page.30 Page.58 Rated operational voltage Ue 690V Rated insulation voltage Ui 000V Rated frequency 5060z Rated current of busbar systems orizontal in the top P ventilated enclosure P Vertical busbar P ventilated enclosure P Rated shortcircuit current Thermical (keff.) cw 80k /s Mechanical data imensions: eight 2000 mm epth 500 mm, 700 mm Width 400 mm, 650 mm, 900 mm nternal separation orm, form 2 and form 3 Power dissipation values Page.80.27

123 Modula Plus Sheel steel distribution boards Safety Tested according Shortcircuit proof arth continuity proven lexible layout quipment zone width 650mm width 900mm usbar zone in the top lateral abling zone integrated cable compartment enclosure of 400mm width ase of handling Lifting eye bolts are delivered as standard with each enclosure Transport segments can be coupled with stable lifting brackets for crane transport able entry able entry plate made of 3 parts included as standard in enclosures of width 650mm and 900mm ases are offered in height of 00mm or 200mm Reliable construction Welded top and bottom frame Painted frame oors and covers 2mm sheet steel, powder coated ccessibility oor opening angle 30 as standard 80 with transparent and design doors oors can easily be removed Removable side and rear panel overplates can be removed individually.28

124 Modula Plus esthetics inish in light grey, RL 7035 hoice of doors plain sheet steel transparent, with wide area equipped with glass design door ase of cabling Wide lateral cutouts in mounting plates of functional units ntegrated or separate cable compartment Safety P20 separation shrouds offered to prevent from accidential access to the busbars Sheet steel distribution enefits boards Modularity overplates and functional units offered from height 50mm up to 700mm LV devices can be mounted in horizontal or vertical position ntegrated system Modula Plus is developed as an integrated system prepared to receive all kind of low voltage devices in conformity to standards proven by typetesting..29

125 Modula Plus Kit structure Sheel steel distribution boards Modula Plus is a range of floor standing system enclosures delivered in kitform, to be assembled, equipped and wired by panel builder and nstaller. ach enclosure consists of different kits which can easily be selected from the overview below. n enclosure consists of a welded frame on bottom and top. Vertical uprights are bolted with a central bolt on top and bottom, building the cabinet structure. n order to be able to receive functional units, a functional frame has to be mounted to the front of enclosures of width 650 and 900mm. Thanks to this functional frame, cover plates and functional units of width 500mm may be fitted into enclosure width 650mm, whereas the enclosure of width 900mm may receive functional units and cover plates of 750mm width. s alternative, the enclosures of 900mm width can be equipped with a functional frame including an integrated cable compartment. When this option is chosen, the enclosure of 900mm width as well needs to be equipped with functional units of width 500mm. Rear panel, bases, side panel and doors can be fitted to the enclosure structure to ensure P degree and goodlooking finish. Overview of the kit structure and a brief description of the content of each kit. Top and bottom frame ncluding roofplate, lifting eye bolts and bottom plate in 3 parts (enclosure width 650mm and 900mm). ncludes gasket and parts for maintain P with enclosures coupled. unctional frame onsisting of two vertical uprights, two horizontal parts in top and bottom and fixation elements. xternal panel Rear panel ( piece) Side panel (set of 2 pieces) elivery always includes all required fixation elements. Vertical uprights Set of 4 pieces including fixation material, fixing elements for rear panel, hinges and closing mechanism for door already premounted. unctional frame with integrated cable compartment n addition to the content of a standard functional frame, two additional vertical uprights and a cover plate for the cable compartment are included. oors inges and closing mechanism already premounted to the vertical uprights; Transparent and design doors are delivered with hinges offering 80 opening angle..30

126 Modula Plus unctional units Kit of mounting accessories to support low voltage devices. ontent: mounting plates or mounting frames, coverplates with cutout according to the device, fixation material. over plates ontent: coverplate, fixation screws, distance holder, metric clips. overplates are offered from height 50mm up to 600mm allowing a flexible layout e.g. by providing space between functional units. unctional units evices with high rated current are supported by stable mounting frames. dditional depth profiles need to be ordered according to the depth of enclosure. over plates for meters ontent: coverplate provided already with cutouts for meters and changeover switch, fixation screws, 2 hinges, distance holder, metric clips. Kit structure ases ach base consists of 4 corner parts and removable covers in front, rear and laterally. ases are offered in heigth 00mm or 200mm. omfort handle andle prepared to receive standard profile halfcylindric lock. The handle can easily be mounted, using same cutout and fixation screws as the standard doublebit locking mechanism. Lifting eye bolts 4 lifting eye bolts are delivered as standard with each cabinet. s alternative when intending to move equipped transport units, a set of reinforced lifting brackets can be chosen. Side connection kit Set of 4 corner profiles including all fixation screws. This kit is especially designed for coupling of equipped transport units..3

127 Modula Plus Selection table epth 500mm / 700mm Width 650mm 900mm 900mm 400mm 650mm 900mm 900mm 400mm Pack. Sheel steel distribution system Top and bottom frame Vertical uprights Set of 4 pieces ntegrated cable compartm. epth 500mm Separate cable compartm ntegrated cable compartm. epth 700mm Separate cable compartm unctional frame unctional door Rear panel ncl. fixation material Side panel Set of two pieces, incl. fixation material oors Plain steel, P Transparent, P55 esign, P ase height 00mm mm Ventilated roof P

128 Modula Plus eneral accessories Lifting brackets Set of lifting brackets for safe crane transport of equipped transport sections. Kit of 2 lifting brackets and fixation material. oupling kit Kit for safe coupling of two enclosures building a transport section. Set of 4 corner profiles including all fixation material. dapter for design and transparent door dapter to mount comfort handle on design and transparent doors. omfort handle andle prepared to receive standard profile half cylindric lock. alf cylinder profile not included. This handle is mounted with the standard screws delivered with each door. Locks profile half cylinder type With 2 keys, V With square key, 8mm With triangular key, 8mm With 2 keys 434 Spare keys are available on request Sheet steel distribution system Mounting profiles epth profile epth 500mm epth 700mm fixed to the functional frame in front and the enclosure structure in the rear. epth 500mm epth 700mm can be fixed to the enclosure structure in front and rear. They are used to mount the vertical busbar in an integrated and separate cable compartment. Set of two pieces including fixation material ottom support for vertical busbars onsists of one Lshape support including fixation material. This profile is used as well to support a horizontal busbar system in the integrated cable compartment. Rear profile Width 650mm Profile to fix busbar holder to the rear of an enclosure width 650mm or in an enclosure with integrated cable compartment. Width 900mm Profile to fix busbar holder to the rear of an enclosure width 900mm. Set of two pieces including fixation material. This profile can be used for both busbar systems up to 630 and racket racket to mount staircase busbar in an integrated cable compartment racket to mount staircase busbar in an separate cable compartment. Set of two pieces including fixation material..33

129 Modula Plus unctional units for modular Nrail devices Sheel steel distribution system unctional unit for modular devices include: Nrail for mounting the modular equipment fixation brackets to attach the Nrail to the functional frame coverplate with cutout for Ndevices screws to mount the Nrail and the fixation brackets screws to fix the cover plate imensions rackets for recessed mounting of Nrails Width 500mm (24 modules of 8mm) eight 50mm eight 200mm imensions eight 50mm eight 200mm These brackets allow modification of a standard Nrail function to receive Ms type Record Plus frame. Set of 2 brackets. (one set need to be ordered in addition for each function for Ms: , , or 88378) Width 750mm (36 modules of 8mm) Pack. Pack. rackets for recessed Nrail eight adapter profiles Profile of length,2 m Pack. Profile of length 354mm Profiles allow mouting of Ms next to M Record Plus frame on a recessed Nrail. (profile of length 354mm allows mounting of 8 or 9 modules next to a M 4 or 3 pole in a functional unit of 24 modules) Profile to mount M next to M on a recessed Nrail Support for horizontal canalisation (only for use with functional units for modular devices of height 200mm) Kit for mounting horizontal cable canalisation up to dimensions 60x40mm The kit includes: horizontal profile supporting the canalisation profile lateral mounting brackets for fixation on the functional frame screws to fix the horizontal profile and the mounting brackets. Width 500mm Width 750mm Support Support Pack. Note: able trunking is not included!.34

130 Modula Plus unctional units for terminals over plates for meters lind cover plates unctional unit for terminals include: Nrail for the terminals fixation brackets to attach the Nrail to the functional frame plain cover plate screws to mount the Nrail and the fixation brackets screws to fix the cover plate ach kit includes a coverpanel with cutouts, fixation screws and two hinges. imensions Width 500mm (24 modules of 8mm) eight 50mm 500 x 200 for 4 meters 72x72mm 500 x 200 for 2 meters 72x72mm 500 x 200 for 4 meters 96x96mm 500 x 200 for 2 meters 96x96mm imensions Width 750mm (36 modules of 8mm) eight 50mm 750 x 200 for 4 meters 72x72mm 750 x 200 for 2 meters 72x72mm 750 x 200 for 4 meters 96x96mm 750 x 200 for 2 meters 96x96mm Pack. Sheet steel distribution system ach kit includes a plain coverpanel and fixation screws. 500 x 50mm 500 x 00mm 500 x 50mm 500 x 200mm 500 x 250mm 500 x 300mm 500 x 400mm 500 x 600mm x 50mm 750 x 00mm 750 x 50mm 750 x 200mm 750 x 250mm 750 x 300mm 750 x 400mm 750 x 600mm Recessed cover plates (40mm) Ventilated cover plates ach kit includes a plain coverpanel and fixation screws. The coverplate is recessed by 40mm and enlarges the space between cover plate and door from 93mm to 33mm. 500 x 300mm x 300mm Mounting plates S = cross section of total ventilation surface. ach kit includes a plain cover panel and fixation screws. 500 x 200mm S = 20 cm x 200mm S = 85 cm Perforated Plain eight 200 mm 400 mm 600 mm 200 mm 200 mm 400 mm 600 mm 200 mm Width 500 mm 500 mm 500 mm 500 mm 750 mm 750 mm 750 mm 750 mm Perforated no no no yes no no no yes To assembly the mounting plates, 2 sets of depth profiles are necessary: epth 500mm with functional chassis: 2 x epth 700mm with functional chassis: 2 x lind cover plate not included. rackets included Pack..35

131 Modula Plus unctional units for M Record Plus without R ll breakers with manual operation Sheel steel distribution system unctional unit for M type Record Plus include: Mounting plate for the breaker cover plate with cutout screws to fix the mounting plate on the functional frame screws to fix the cover plate Note: a covering profile to fill the cutout in the cover plate is included in every functional unit for 3 breaker of functional unit Width 500mm Width 750mm Width 500mm Width 750mm Width 500mm reaker type 3pole / 4pole /3pole 630/4pole 630/3pole 630/4pole Mounting position horizontal vertical horizontal vertical horizontal vertical horizontal vertical horizontal horizontal vertical vertical Qty of breaker eight mm Pack. Width 750mm unctional unit to mount moulded case circuit breaker type Record Plus /3pole 630/4pole 630/3pole 630/4pole horizontal horizontal vertical vertical Note: all functional units allow front or rear connection of the breaker. unctional units for M type Record Plus K600 include: rame to mount the breaker cover plate with cutout screws to fixt the mounting frame on the functional frame screws to fix the cover plate epth profile to mount a functional unit type Record Plus K600 in horizontal position. Two set of depth profiles need to be ordered with every functional unit depending on the depth of the enclosure. K600 Width 500mm () () Width 750mm () K600 K600 K600 horizontal vertical vertical () M type Record Plus K600 are fixed on a mounting frame. or mounting the frame into an enclosure, always two set of depth profiles need to be ordered according to the depth of enclosure. e.g. or K 600, horizontally mounted in enclosure epth 500mm: x epth 700mm: x ll functional units fit in enclosure depth 500mm and depth 700mm ccessories Plastic cable binder support Set of 24 pieces These supports can be fitted to each functional unit for M Record Plus up to frame (630) over profile over profile for standard cutouts of 65mm for Record Plus breaker and frame. L =.2 m.36

132 Modula Plus unctional units for M Record Plus with R ll breakers with manual operation unctional unit for M type Record Plus include: Mounting plate for the breaker cover plate with cutout screws to fix the mounting plate on the functional frame screws to fix the cover plate Note: a covering profile to fill the cutout in the cover plate is included in every functional unit for 3 breaker. unctional unit to mount moulded case circuit breaker type Record Plus Note: all functional units allow front or rear connection of the breaker ccessories Plastic cable binder support Set of 24 pieces These supports can be fitted to each functional unit for M Record Plus up to frame (630) of functional unit Width 500mm Width 750mm Width 500mm Width 750mm Width 500mm Width 750mm reaker type 3pole / 4pole /3pole 630/4pole 630/3pole 630/4pole 630/3pole 630/4pole 630/3pole 630/4pole Mounting position horizontal vertical horizontal vertical horizontal vertical horizontal vertical horizontal horizontal vertical vertical horizontal horizontal vertical vertical () Record Plus frame with lateral R, mounted without standard connection kit. (2) t is advisible to foresee 50mm of cabling space underneath the function. ll functional units fit in enclosure depth 500mm and depth 700mm. over profile over profile for standard cutouts of 65mm for Record Plus breaker and frame. L =.2m Qty of breaker () 2 () () 3 () 3 3 eight mm (2) 600 (2) (2) 600 (2) Pack. Sheet steel distribution system.37

133 Modula Plus unctional units for M Record Plus Plugin, all breakers with manual operation Sheel steel distribution system with R 630 Rotary operation 60 without R 60 with R of functional unit Width 500mm Width 500mm reaker type 3pole / 4pole /3 pole 630/4 pole 60/rotary handle 60/rotary handle Mounting position horizontal horizontal horizontal horizontal horizontal horizontal horizontal Qty of breaker eight mm Pack. 250 without or with R /rotary handle horizontal without or with R /rotary handle horizontal 250 K600 without R () K600/rotary handle horizontal 400 Motor operation 60 without R Width 500mm /motor operation horizontal with R /motor operation horizontal without or with R /motor operation horizontal without or with R () 630/motor operation horizontal 300 K600 without R () K600/motor operation horizontal () M type Record Plus 630 in horizontal position and K600 are fixed on a mounting frame. or mounting the frame into an enclosure, always two set of depth profiles need to be ordered according to the depth of the enclosure. e.g. or 630,motor operation in enclosure epth 500mm: x epth 700mm: x ll functional units fit in enclosure depth 500mm and depth 700mm. osmos functional unit for M Record Plus and ssembly on copper bars type osmos Vertical Mounting eight 300 mm Width 500 mm ut out 433 x 66 mm 400 Maximum number of Record Plus breakers Type 3P = 5 4P = 3 Type 3P = 4 4P = 3.38

134 Modula Plus unctional units for disconnector loadbreak switches LOS ll switches with rotary handle unctional unit for loadbreak switches type LOS includes: mounting plate for the breaker cover plate with cutout screws to fix the mounting plate on the functional frame screws to fix the cover plate unctional unit to mount loadbreak switches in a system enclosure type Modula Plus. unctional unit to for loadbreak switches type LOS 4, 6S, 7S and 8S include: mounting frame for the breaker cover plate with cutouts screws to assemble the mounting frame screws for the cover plate Note: depth profiles always have to be ordered separately according to the enclosure depth. 40 up to up to up to up to up to k 800 up to k 600 up to k of functional unit Width 500mm () () () () Width 750mm () () () () reaker type 3pole / 4pole LOS LOS LOS 2 LOS 3 LOS 3 LOS 4 LOS 4 LOS 6S LOS 6S LOS 6S LOS 6S LOS 7S/8S LOS 7S/8S Mounting position vertical vertical vertical horizontal vertical horizontal vertical horizontal vertical horizontal vertical horizontal vertical Qty of breaker eight mm () Loadbreak switches type LOS 4, 6S, 7S, 8S are fixed on a mounting frame. or mounting the frame into an enclosure, always two sets of depth profiles need to be ordered according to the depth of the enclosure. e.g. or LOS 4 horizontally mounted: epth 500mm : x epth 700mm : x ll functional units, except LOS 7S/8S in horizontal position (884063), can be mounted in both depth 500mm and depth 700mm requires an enclosure of 700mm depth. Pack. Sheet steel distribution system unctional units for disconnector loadbreak switches ULOS ll switches with rotary handle unctional unit to for fused loadbreak switches type ULOS include: mounting frame for the breaker. cover plate with cutouts screws to assemble the mounting frame screws for the cover plate Note: depth profiles always have to be ordered separately according to the enclosure depth. epth profile to mount a functional unit type ULOS ULOS 3S. Two sets of depth profiles need to be ordered with every functional unit depending on the depth of the enclosure. of functional unit Width 500mm 42 up to ULOS 000/ULOS 00/ULOS up to () () () reaker type 3pole/4pole ULOS /ULOS 2 ULOS 3S (N) ULOS 3S (N) Mounting position horizontal horizontal horizontal vertical Qty of breaker eight mm () Loadbreak switches type ULOS 23S are fixed on a mounting frame. or mounting the frame into an enclosure, always two sets of depth profiles need to be ordered according to the depth of the enclosure. e.g. or ULOS 2 horizontally mounted: epth 500mm : x epth 700mm : x ll functional units fit in enclosure depth 500mm and depth 700mm. Pack..39

135 Modula Plus unctional units for automatic changeover switches Record Plus ll breakers with motor operation Sheel steel distribution system unctional unit for automatic changeover switches includes: mounting frame for the breaker. cover plate with cutouts Screws to assemble the mounting frame screws for the cover plate Note: depth profiles always have to be ordered separately according to the enclosure depth. unctional unit for automatic controller for changeover switches type Record Plus. hangeover Record Plus KK K KK K utomatic ontroler of functional unit Operation Rotary handle hor. assembly Rotary handle hor. assembly Rotary handle hor. assembly Rotary handle hor. assembly Rotary handle hor. assembly Rotary handle hor. assembly Rotary handle hor. assembly Motor operated hor. assembly Motor operated hor. assembly Motor operated hor. assembly Motor operated hor. assembly Motor operated hor. assembly Motor operated hor. assembly reaker type Qty of 3 poles / 4 polesbreakers 3P 4P 3P/4P 3P 4P 3P/4P 3P/4P 3P/4P 3P/4P 3P 4P 3P/4P 3P/4P 3P/4P eight (mm) hangeover functions are fixed on a mounting frame. or mounting the changeover functions into the enclosure, always two set of depth profiles need to be ordered according to the depth of the enclosure 250 Pack osmos functional unit for industrial fuses ssembly on copper bars type osmos Vertical Mounting.g. hangeover function motor operated in enclosure epth 500 mm: x epth 700 mm: x eight Width ut out mm 500 mm 42 x 95 mm.40

136 Modula Plus unctional units for air circuit breaker MPact Plus of functional unit reaker type 3pole / 4pole Mounting position Qty of breaker eight mm Pack. unctional unit for type MPact Plus includes: mounting frame for the breaker cover plate with cutout screws to assemble the mounting frame screws to fix the cover plate Note: a set of depth profiles always needs to be ordered separately according to the enclosure depth unctional unit to mount in a system enclosure type Modula Plus. 800 up to up to 4000 Width 500mm () () Width 750mm () () MPact Plus frame MPact Plus, frame MPact Plus, frame /2 MPact Plus, frame /2 vertical vertical vertical vertical fixed withdrawable fixed withdrawable () ir circuit breakers type MPact Plus are fixed on a mounting frame. or mounting the frame into an enclosure, always one set of depth profiles needs to be ordered according to the depth of the enclosure. e.g. or MPact Plus frame size, fixed mounted: epth 500mm : x epth 700mm : x Note: ll functional units, except MPact Plus frame size, fixed (884065), can be mounted in depth 700mm only can also be fitted in an enclosure of 500mm depth. Sheet steel distribution system.4

137 Modula Plus Sheel steel distribution system orm separation nclosures type Modula Plus can be equipped with separation screens orm2 according to standard N 60439, which means separation between busbar compartment and functional units with a protection degree of P2x or Pxx. olumns with feeder type MPact Plus can be equipped with separation screens up to orm 3. The individual separation screens are made of polypropylene (selfextinguishing) with a thickness of 3mm. orizontal separation screens orm 2 Separation between horizontal busbar and functional units orizontal separation screens include: Separation screen ixation screws Note: horizontal separation screens are fixed to depth profiles of the horizontal busbar in the top. f there is no busbar system, a set of depth profiles needs to be ordered separately according to the enclosure depth Vertical separation screens orm 2 Separation between lateral busbar and functional units Vertical separation screens include: Separation screen ixation screws Note: vertical separation screens are fixed directly to the vertical uprights of an enclosure. of form separation nclosure dimensions nclosure width 650mm and 900mm (depth 500mm and 700mm) nclosure width 400mm (depth 500mm and 700mm) Panel depth 500mm Panel depth 700mm Pack. Vertical separation screens orm 2 Separation screen for vertical busbar systems in the rear Panel width 650mm and 900mm with integrated cable compartment Panel width 900mm nternal separation orm 3 Separation form 3 for air circuit breaker Type MPact Plus orm 3 separation for type MPact Plus includes: separation screens P20 fixation brackets screws to fix brackets and separation screens. Note: orm 3 separation always requires form 2 separation for the enclosure where the breaker is installed. or form 2 separation please refer to page.5. unctional unit to mount in a system enclosure type Modula Plus, form 3. of functional unit Width 500mm MPact Plus frame size 800 up to Width 750mm MPact Plus frame size 800 up to reaker type 3pole/4pole MPact Plus, frame MPact Plus, frame MPact Plus, frame 2 MPact Plus, frame 2 Mounting type fixed withdrawable fixed withdrawable Pack. nternal separation form 3 for M Record Plus () Separation of the functions nternal width 500 mm epth 500 mm epth 700 mm nternal width 750 mm

138 Modula Plus Notes Sheet steel distribution system.43

139 Modula Plus usbars Sheel steel distribution system The busbar system for enclosures range Modula Plus is designed to allow easy installation and combination of horizontal and vertical busbars, whereas the vertical busbar can be located in the back of the enclosure, behind the functional unit or in a lateral busbar compartment. Nominal current (P30) orizontal and vertical busbar in a lateral cable compartment: 240 in an enclosure of 500mm depth (max. 2 bars per phase) 4000 in an enclosure of 700mm depth (up to 4 bars per phase) Vertical busbar in the back of a functional compartment: up to 630 n addition, there is an option to place a vertical staircase busbar system up to 630 in the lateral cable compartment. The copper bars of this kind of busbar system are arranged in different layers, allowing easy cabling of outgoing devices. onnection of horizontal and vertical busbar system. ottom support for vertical busbar system. orizontal busbar up to 4000 Vertical busbar in cable compartment Vertical busbar in integrated cable compartment.44

140 Modula Plus Main busbar system The main busbar system is based on rectangular copper bars of 5mm thickness and a length of 650mm. ach bar has lenghtwise diam. mm holes every 25mm on both sides for easy and time saving connections and to fix outgoing cables. The copper bars are bent on one side for lengthwise or square coupling without any additional connecting plate. The vertical busbar can be mounted in an integrated lateral busbar compartment at left or right side of an enclosure of 900mm width or in a separate cable and busbar compartment. t is recommended to mount the bottom support of the vertical busbar after defining the exact position of the busbars. The horizontal busbar system can be mounted at any height of the enclosure Modula Plus and requires a height of 250mm (with copper bars up to 25x5mm) or 300mm (copper bars 60x5mm). The busbars can be front covered by plain cover plates of appropriate height and width. n enclosures of depth 700mm the space in front of the busbars may as well be used for functional units for terminals or Nrail devices. The supports for the horizontal busbars are the same as for the vertical busbar system. The busbar supports are fixed to the enclosure by depth profiles, which always need to be ordered separately. epth profiles to mount vertical and horizontal busbar orizontal busbar in enclosure The horizontal busbar system is fixed to the functional frame in front and the enclosure structure in the rear with standard depth profiles nclosure depth 500mm, set of 2 profiles nclosure depth 700mm, set of 2 profiles Vertical busbar in integrated or separate cable compartment The vertical busbar is fixed to the enclosure structure in front and rear by means of following depth profiles nclosure depth 500mm, set of 2 profiles nclosure depth 700mm, set of 2 profiles Sheet steel distribution system orizontal busbar ottom support for vertical busbar nclosure depth 500mm and 700mm The vertical busbar is supported at the bottom by a busbar holder fixed on the depth profiles for the vertical busbar by an additional Lshape profile This profile may serve as well to support a horizontal busbar in a cable compartment, where no functional frame is available. P N / P No # LL2L No # N 2 u Wx mm 63x5 80x5 00x5 63x5 25x5 00x5 25x5 25x5 60x5 60x5 Selection table for horizontal and vertical busbar system 2k k cw L 35k 50k k k 250 overplate /mm usbar L = 650mm usbar support

141 Modula Plus Rear mounted busbar system up to 630 Sheel steel distribution system nclosures Modula Plus offer an option to use rear mounted busbar system or nominal current up to 630. Technical characteristics dmissible current ross section of busbars Length of busbars 630 in P30 20 x 5mm 32 x 5mm 30 x 0mm 000mm The copper bars have pretapped holes M6 or M8 (depending on the cross section of the copper bars) for easy cable connection. The busbar holder guarantees high shortcircuit resistance and is fixed to the rear structure of the cabinets by a special mounting profile. protective shroud of height 000mm offers the possibility to cover the whole busbar system, offering internal separation of form 2. usbar holder Mounting profiles ccessories for enclosures W650mm and 900mm with integrated cable compartment for enclosures W900mm olts Set of 40 bolts M6x6 for copper bars of 20x5mm and 32x5mm Set of 40 bolts M8x20 for copper bars of 30x0mm Protective shroud x 000mm xample of busbar system 630, to be mounted in enclosure width 650mm: x 88085, 4 copper bars 30 x 0mm 3 x , busbar holder 2 x , mounting profiles W650mm Selection table for rear mounted busbar system N / P30 P u W x 20x5 32x5 30x0 Tapped holes M6 M6 M8 5k cw 20k k u L/mm u usbar support W = 650mm W = 900mm

142 Modula Plus Lateral busbar system up to 630 nclosures Modula Plus can be equipped with busbar system up to 630 located in the lateral cable or busbar compartment at left or right side of the cabinet. Technical characteristics dmissible current ross section of busbars Length of busbars 630 in P30 20 x 5mm 32 x 5mm 30 x 0mm 000mm The copper bars have pretapped holes M6 or M8 (depending on the cross section of the copper bars) for easy cable connection. The busbar holder for lateral busbar systems has a staircase shape which eases the cabling of the different phases. Like in the rear mounted busbar systems, the staircase busbar system can be equipped with a protective shroud to prevent from accidential access to life parts, offering internal seggragation of form 2. Staircase busbar holder Set of 4 pcs, 4 pole pc, 4 pole ccessories to mount the staircase busbar in an integrated cable compartment () Mounting brackets, set of 2 pieces () please order one set for each busbar support Protection shroud rontal, P20 Sheet steel distribution system Mounting in Modula Plus: or mounting a busbar system of 630 in the lateral cable compartment some fixation brackets are required to fix the busbar holder in the rear of the cable compartment Set of frontal and lateral, P Set of top and bottom ccessories olts Set of 40 bolts M6x6 for copper bars of 20x5mm and 32x5mm Set of 40 bolts M8x20 for copper bars of 30x0mm Selection table for rear mounted busbar system P30 N / P55 u W x mm Tapped holes 5k cw 20k 25k 30k u L/mm u usbar support Mounting bracket Qty x5 32x5 30x0 M6 M6 M

143 Modula Plus arthing busbars Sheel steel distribution system n enclosures Modula Plus horizontal and vertical earthing bars can be realised with copper bars of cross section 32x5mm. The bars have a standard length of 750mm and are provided with predrilled holes on its whole length. The earth bars are fixed to the functional frame by brackets included in the delivery of the bars. The vertical bar is bent with an angle of 90 at one side, offering an simple possibility to connect to the horizontal busbar. Kit for vertical earth bar Kit for vertical earth bar ontaining of one copper bar, L 750mm, 4 cage nuts and screws for fixing to the functional frame Kit for horizontal earth bar Kit for horizontal earth bar ontaining one copper bar, L 750mm, 4 cage nuts and screws for fixing to the functional frame oupling of horizontal and vertical earth bars Possible configuration of busbar systems The drawing on the right gives an overview of all different kind of busbar configurations which may be implemented in system enclosures Modula Plus: rear busbars up to 630 lateral staircase busbars up to 630 vertical busbars up to 4000 horizontal busbars up to

144 ndustrial nclosures pplication guide / ecatalogue nsulated boxes.5 (nonmetallic) nsulated wall mounting cabinets (nonmetallic) 3 (nonmetallic) Wall mounting system enclosures (nonmetallic) 6 (nonmetallic) Sheet steel distribution boards.22 RVS (stainless steel) Pedestals Subterranean enclosures limate control eneral accessories eneral characteristics ndex.

145 ndustrial nclosures Overview nonmetallic pedestals P43/P23 3/ P44 3/P P44 3/ P44 4 P43 6 P44/P x 385 x x 590 x x 590 x x 785 x x 470 x P x 395 x x 785 x x 785 x x 5 x x 605 x 320 Pedestals 590 x 425 x x 5 x x 5 x 320 3/P P x 495 x x 800 x x 676 x x 433 x x 445 x x 445 x x 745 x x 87 x 424 4S P x 433 x x 590 x x 200 x x 320 x x 433 x x 785 x x 676 x x 320 x x 5 x x 87 x x 445 x x 200 x 676 x W x in mm.2

146 ndustrial nclosures Overview stainless steel pedestals RVS with single door P43 RVS with double door P43 RVS with double door and 2 compartments P43 N 00 N 0 N N 2 N 3 N 4 N x 460 x x 595 x x 790 x x 20 x x 20 x x 460 x x 595 x x 790 x x 20 x x 450 x x 780 x x 20 x 355 Pedestals 000 x 595 x x 790 x x 20 x x 450 x x 780 x x 20 x 355 N 3 50 x 790 x x 20 x x 450 x x 780 x x 450 x x 450 x x 780 x x 450 x 355 x W x in mm.3

147 ndustrial nclosures abinets for underground cable distribution and all kind of outdoor industrial application Pedestals Standards N pplications Power distribution able television (TV) in one or two ways Telecommunication and electronics Traffic signalling and public lighting Temporary service for construction sites amping sites and market places Marinas Water treatment Substations 48 cm (9") racking systems wide range of pedestals has completed our comprehensive range of nonmetallic enclosures for several years. n power distribution application pedestals enable the connection of underground cables and the distribution to several consumers within the cabinets. esides there are lots of applications that require reliable outdoor housings like Telecommunication or Traffic signalling. eatures abinets to be mounted on a plinth. The base is partly buried into the ground. or some types the base is an integrated part of the pedestals. s with all our polyester boxes and cabinets, the pedestal feature high protection and total insulation to S 5486, Part and egree of protection is at least P43. Very high mechanical impact strength K0 (N/ 62262) and a high thermal insulation which results in reduced temperature variations within the enclosure. ll cabinets are corrosion resistant and UV stabilised for outdoor applications..4

148 pplications able television distribution (TV) as distribution Telecommunication (surface terminal cabinet) amping sites Small pedestal eatures Small outdoor enclosure with integrated base. ood grey colour RL 7036 ventilated version in thermoplastic engineering polymer non ventilated version in hot moulded, glass fibre reinforced polyester blackened triangular zamac locking screws, vandalproof and for all seasons egrees of protection: P43 for the non ventilated hoods P23 for the ventilated hoods. ccording to and S 5490 Protection degree K0 against external mechanical impacts according to N/ ase in high density polyethylene (P) RL 9005 ase resists a ground temperature of 50 The upper part of the base serves as a mounting plate and is provided with three slots for fixation points. Mouldedin indication of burial depth. asy to install by one person only (weight: 4.5 kg). Standards N Pedestal Small pedestal Type Ventilated, thermoplastic Ventilated, thermoplastic + lock 2432 Nonventilated, polyester Nonventilated, polyester + lock 2432 Key for triangular screws Pack. able television distribution Overview of the range imensional drawings Specifications for tender documents Power dissipation values Page.2 Page.32 Page.60 Page.84.5

149 2 olumn cabinets eatures Pedestals pplications Power distribution able TV distribution (TV) Traffic signalling amping sites Pump application olumns made of hot moulded, glass fibre reinforced polyester. yed in mass RL 7035 light grey. Protection degree P44 according to N 60529, and S 5490 Total insulation Protection degree K0 against external impacts according to N/ orrosion resistant. UV stabilised for outdoor applications, coated version for improved resistance against UVcorrosion. Suitable for use in environments from 35 to +25. Temporary exceeding temperatures will not be harmful. ully integrated locking clamp, suitable for operation by a half profile cylindric lock. The cylindric lock can be fitted in a recessed lock box, protected by a vandal proof plastic cap. The enclosure can be accessed by removing the frontal liftoff segments (not hinged). ixing holes for threaded inserts M6 are provided in the rear panel allowing direct mounting of busbars, a frame, a mounting plate or components. nserts to fix the mounting plate are already installed. The base and the rear panel of the column are molded as one part. The base allows for stable installation of the column. or easy access to the inside of the cabinet, the hinged roof offers an opening angle of 90. The rainhood shape prevents water stagnation on the roof. Standards N Overview of the range imensional drawings Specifications for tender documents Power dissipation values Page.2 Page.33 Page.6 Page.84.6

150 2 2 olumn cabinets Type 2N 2N 2N 2N Standard x W x 097 x 433 x x 433 x x 433 x x 433 x Mounting plate Pertinax with fixing bolts ccessories x W x 200 x 395 x x 395 x x 395 x x 395 x olumn cabinets Locks profile half cylinder type Vandal proof nameplate holder an be placed on every flat surface, by drilling two holes Ø 5.5 mm; the identifica With 2 keys, V With square key, 8 mm tion window is used as a drill template. Steady against vandalism; it keeps its total isolation. Possibility to write on manually and/or to use the standard letteringsystems; the maximal letterheight is 8 mm. Usefull dimensions of letters: 8 x With triangular key, 8 mm With 2 keys 434 Spare keys are available on request. Outside dimensions: 30 x 83 x 5 nserts Threaded inserts M6 x Special tool for securing threaded inserts M Support for cable release clamp (to be ordered separately).7

151 3 Pedestals ommon features Pedestals pplications Power distribution Water treatment able television distribution (TV) in one or two ways Photovoltaic amping sites and market places Traffic signalling and public lighting abinets made of hot moulded, glass fibre reinforced polyester. yed in mass RL 7035 light grey. elivered in kitform or factory assembled. Protection degree P44 according to N 60529, and S 5490 Total insulation Protection degree K0 against external impacts according to N/ orrosion resistant. UV stabilized for outdoor applications, coated cabinets for increased resistance against UVcorrosion on request. Suitable for use in environments from 35 to Temporary exceeding temperatures will not be harmful. The open door can be manually unhinged to allow free access for maintenance. oor opening angle exceeds 80. Studs are moulded in the rear panel which can receive M8 inserts to allow direct mounting at busbars, a frame or a mounting plare for components. ixation points at the side panel are foreseen to mount busbars. Supplied with open bottom. To be mounted on a basement according to N standard dimensions between the fixation points. The rainhood shape prevents water stagnation on the roof. abinets can be coupled together side to side or double deep. Removable bottom profile for easy cable access without tools. Standards N / abinets with flat surface our sizes in four different widths; all sizes feature the same height and depth. Three point locking mechanism, operated by a swing handle. The swing handle is designed to receive a half profile cylindric lock. 3/P abinets with anti fly posting surface ight sizes in four different widths and two different heights; all sizes feature the same depth. Three point locking mechanism, operated by a solid handle. The solid, not recessed handle allows for more usable space inside the cabinet and is designed to receive a half profile cylinder lock. Profiled door and rear panels make poster sticking difficult and causes poster to drop off..8

152 3 3 Nsize pedestals N 0 N N 2 N 3 Type 3 / ( = 875) P44 Kitform actory assembled Type 3 / P ( = 875) P44 Kitform actory assembled Type x W x Type x W x 3/ x 590 x /P x 590 x / 875 x 785 x /P 875 x 785 x / x 5 x /P x 5 x / x 445 x /P x 445 x Nsize pedestals in kitform Type 3 / P ( = 25) P44 Kitform actory assembled Mounting plate eight 875 mm Type x W x x W x 3/P x 590 x x 485 x /P 2 25 x 785 x x 680 x /P x 5 x x 000 x /P x 445 x x 340 x eight 25 mm x W x 95 x 485 x x 680 x x 000 x x 340 x Pertinax with fixing bolts ottom plate Polyester 3 mm with mounting bolts x W 562 x x x x Wall fixing unit Two aluminium profiles with wall fixing lugs W Polyester bases Kitform x W x 900 x 585 x x 780 x x 0 x x 430 x Overview of the range Page.2 Specifications for tender documents Page.6 imensional drawings Page.34 Power dissipation values Page.85.9

153 3 ccessories Locks profile half cylinder type Vandal proof nameplate holder an be placed on every flat surface, by drilling two holes Ø 5.5 mm; the identification window is used as a drill template. Steady against vandalism; it keeps its 39.5 With 2 keys, V total isolation Possibility to write on manually and/or to With square key, 8 mm use the standard letteringsystems; the maximal letterheight is 8 mm. Usefull dimensions of letters: 8 x 43 Pedestals With triangular key, 8 mm With 2 keys 434 Spare keys are available on request. ocument pocket Outside dimensions: 30 x 83 x 5 nserts Threaded inserts M8 Type dodge for rear panel and door. 856 N 4 W x = 325 x 80 mm N 5 W x = 55 x 225 mm Special tool for securing threaded inserts M8 Louvre plate P its one ventilation opening. Package includes 2 grids and 4 nylon nails. Total insulation. RL

154 / ( = 875) O O2 O3 O4 O5 O6 O7 O8 O9 O0 O O2 O3 O4 O5 O6 O7 O8 O9 O0 oor (with handle) oorpost Roof Rear panel Middle beam Side panel ottom profile Support Set hinges 3 Spare parts 3/ 0 left right / ( = 875) 3/P ( = 875) oor (with handle) Left door (without handle) oorpost Roof Rear panel Middle beam Side panel ottom profile Support Set hinges Set accessories includes all screws, washers and bolts for assembly of the individual polyester parts into a cabinet. N 0 O O2 O3 O4 O5 O6 O7 O8 O9 N N 2 N 3 3/ left right / 2 left right / 3 left right Nsize pedestals in kitform 3/P ( = 875) O O2 O3 O4 O5 O6 O7 O8 O9 O0 3/P 0 left right /P left right /P 2 left right /P 3 left right or polyester parts with special UV topcoat for prolonged smooth surface of roof, door, rear and side panels, please contact us O O2 O3 O4 O5 O0 3/P ( = 25) oor (with handle) oorpost Roof Rear panel Middle beam O6 O7 O8 O9 Side panel ottom profile Support Set hinges Set accessories includes all screws, washers and bolts for assembly of the individual polyester parts into a cabinet /P ( = 25) O O2 O3 O4 O5 O6 O7 O8 O9 O0 3 Spare parts N 0 N N 2 N 3 3/P 20 3/P 2 3/P 22 3/P 23 left right left right left right left right

155 3/ Pedestals with two separate compartments eatures Pedestals pplications amping sites Temporary connections Metering/distribution combined cabinet Traffic signalling Standards N abinets made of hot moulded, glass fibre reinforced polyester. yed in mass RL 7035 light grey. Two sizes in two different widths, both sizes feature the same height and depth. Two compartments partitioned for separate functional requirements. Shipped fully assembled. Protection degree P44 according to N 60529, and S 5490 Total insulation Protection degree K0 against external impacts according to N/ orrosion resistant. UV stabilized for outdoor applications. Suitable for use in environments from 35 to Temporary exceeding temperatures will not be harmful. ach door has a three point locking mechanism operated by a recessed handle or a swing handle, designed to receive a half profile cylindric lock. The open doors can be manually unhinged to allow free access for maintenance. Mounting plates included, except for the right compartment of 3/2 Threaded inserts for bolts M0 are moulded in the rear panel, allowing for direct mounting of busbars, a frame or a mounting plate for components. Supplied with open bottom. To be mounted on a basement according to N standard dimensions between the fixation points. The rainhood shape prevents water stagnation on the roof. abinets can be coupled together side to side or double depth. Overview of the range imensional drawings Specifications for tender documents Power dissipation values Page.2 Page.37 Page.62 Page.85.2

156 3/ 3/ Pedestals with separate compartments N N 2 Type 3/ Two compartments actoryassembled P44 With recessed lock With swing handle Mounting plate for the right compartment Pertinax with fixing bolts ottom plate Polyester 3 mm with mounting bolts Type x W x x W x x W 3/ 875 x 785 x 320 Unique mounting plate for both compartments included 757 x / x 5 x 320 ncludes mounting plate for left compartment x 620 x x Pedestals with two separate compartments Wall fixing unit Two aluminium profiles with wall fixing lugs W Polyester bases Kitform x W x 900 x 780 x x 0 x

157 3/ ccessories Locks profile half cylinder type Vandal proof nameplate holder an be placed on every flat surface, by drilling two holes Ø 5.5 mm; the identification window is used as a drill template. Steady against vandalism; it keeps its 39.5 With 2 keys, V total isolation. Possibility to write on manually and/or to With square key, 8 mm use the standard letteringsystems; the maximal letterheight is 8 mm. Usefull dimensions of letters: 8 x 43 Pedestals With triangular key, 8 mm With 2 keys 434 Spare keys are available on request. ocument pocket 856 N 4 W x = 325 x 80 mm Outside dimensions: 30 x 83 x 5 oor blocker To prevent unwanted closing of opened door in case of strong wind N 5 W x = 55 x 225 mm To be mounted easily on the ridges in side wall and door orrosion free Louvre plate P its one ventilation opening. Package includes 2 grids and 4 nylon nails. Total insulation RL 7035 lamps for quick removal of bottom profile Replace the standard fixation of bottom profile with fixed screws. Permits to remove the bottom profile without tools, after withdrawing the door. etter entry to the pedestal for cable connection. nserts Threaded inserts M8 Type dodge for side panel Special tool for securing threaded inserts M8.4

158 3/ Notes Pedestals with two separate compartments.5

159 3/ Pedestals with greater depth eatures Pedestals pplications Power distribution as meter units Power supply and control units Rectifier or inverters enerators or transformer stations Pumping installations 9" rack electronic systems oor, rear and side panels made of hot moulded, glass fibre reinforced polyester. yed in mass RL 7035 light grey. Rainhood made of hand layup glass fibre reinforced polyester. Rainhood with RL 7035 topcoat. Six sizes in two heights, two depths and three widths. Shipped fully assembled. Protection degree P43 according to N 60529, and S 5490 Total insulation Protection degree K0 against external impacts according to N/ orrosion resistant. UV stabilized for outdoor applications. Suitable for use in environments from 35 to + 25 Temporary exceeding temperatures will not be harmful. Three point locking mechanism, operated by a solid handle. The solid, not recessed handle allows for more usable space inside the cabinet and is designed to receive a half profile cylinder lock. The open doors can be manually unhinged to allow free access for maintenance. Possibility of pivoting door on side or back. Threaded inserts for bolts M0 are moulded in the rear panel, allowing for direct mounting of busbars, a frame or a mounting plate for components. Supplied with open bottom. Provided with fixing points for floor or base mounting. The rainhood shape prevents water stagnation on the roof. nti poster surface make poster sticking difficult and causes poster to drop off. Standards N ccessories Locks profile half cylinder type Vandal proof nameplate holder an be placed on every flat surface, by drilling two holes Ø 5.5 mm; the identification window is used as a drill template. Steady against vandalism; it keeps its 39.5 With 2 keys, V total isolation. Possibility to describe manually and/or to With square key, 8 mm With triangular key, 8 mm With 2 keys 434 Spare keys are available on request. use the standard letteringsystems; the maximal letterheight is 8 mm. Usefull dimensions of letters: 8 x 43 Outside dimensions: 30 x 83 x 5 ocument pocket 856 N 4 W x = 325 x 80 mm N 5 W x = 55 x 225 mm.6

160 3/ 3/ Pedestals with greater depth Width Type 3 / ( 875, 424 mm) actoryassembled P43 Type 3 / ( 25, 676 mm) actoryassembled P43 Type x W x Type x W x 3/P x 676 x /P x 676 x /P x 87 x /P x 87 x /P x 200 x /P x 200 x Pedestals with greater depth Mounting plate = 875 mm x W x 665 x 485 x x 680 x x 000 x = 25 mm x W x 95 x 485 x x 680 x x 000 x Pertinax with fixing bolts ottom plate = 424 mm = 676 mm x W x W 635 x x x x x x Polyester 3 mm with mounting bolts Polyester bases Kitform or cabinets = 424 mm x W x 900 x 645 x x 835 x x 64 x = 676 mm x W x 900 x 645 x x 835 x x 64 x ccessories Louvre plate P its one ventilation opening. Package includes 2 grids and 4 nylon nails. Total insulation. RL 7035 lamps for quick removal of bottom profile Replace the standard fixation of bottom profile with fixed screws. Permits to remove the bottom profile without tools, after withdrawing the door. etter entry to the pedestal for cable connection. Overview of the range Page.2 Specifications for tender documents Page.62 imensional drawings Page.38 Power dissipation values Page.85.7

161 4 olumn cabinets ommon features Pedestals pplications Power distribution able TV distribution Traffic signalling amping sites Pump application Pedestal and base are made of hot moulded glass fibre reinforced polyester. yed in mass RL 7035 light grey. Protection degree P43/P44 according to N 60259, and S 5490 Total insulation mpact strength K0 against external impacts according N/ orrosion resistant. UV stabilised for outdoor applications. Suitable for use in environments from 35 to +25. Temporary exceeding temperatures will not be harmful. ixing holes for threaded inserts M6 are provided in the rear panel allowing direct mounting of busbars, mounting plate or components. nserts to fix a mounting plate are installed. The base can be buried into the ground for stable installation of the column. The rainhood shape prevents water stagnation on the roof. eatures for 4 abinets with hinged door P43 Pedestal and base are delivered together. Swing handle for half profile cylindrical lock. oor opening angle of 80 Standards N eatures for 4S abinets with frontal liftoff segments P44 ase and rear panel are moulded as one part. Recessed lock box for half profile cylindrical lock, protected by a vandal proof cover. The enclosure can be accessed by removing the frontal liftoff segments (not hinged). Overview of the range Page.2 imensional drawings Specifications for tender documents Page.40 Page Power dissipation values Page.84.8

162 4 4/4S olumn cabinets Width Type S 4S2 Mounting plate Pertinax with fixing bolts x W x Type x W x 600 x 395 x x 370 x x 495 x x 470 x x 745 x x 720 x x 320 x x 278 x x 320 x x 278 x olumn cabinets ccessories Locks profile half cylinder type Swing handle or 4 with double bit locking or 4 security lock V or 4 security lock V2432 for double locking or 4S with 2 keys, V2432.9

163 6 Pedestals P44/54 eatures Pedestals pplications Power distribution able TV amping sites Traffic signalling Standards N abinets are made of hot moulded, glass fibre reinforced polyester. yed in mass RL 7035 light grey. Three sizes in three widths; all sizes feature the same height and depth. ach size is available in two protection degrees; P44 and P54 according to N 60529, and S 5490 elivered in space saving kitform or factory assembled. Total insulation Protection degree K0 against external impacts according to N/ orrosion resistant. UV stabilized for outdoor applications. Suitable for use in environments from 35 to Temporary exceeding temperatures will not be harmful. Three point locking mechanism, operated by an integrated handle or swing handle. The open doors can be manually unhinged to allow free access for maintenance. The door opening angle exceeds 80 The rear panel has mounting holes for self tapping screws ilo 7.2 x 26 mm and threaded inserts M8, allowing direct mounting of busbars, a frame, a mounting plate for components. Supplied with open bottom. To be mounted on a plinth according to N standard dimensions between the fixation points. The rainhood shape prevents water stagnation on the roof. abinets can be coupled side to side or double deep. ccessories Locks profile half cylinder type Vandal proof nameplate holder an be placed on every flat surface, by drilling two holes Ø 5.5 mm; the identification window is used as a drill template With 2 keys, V Steady against vandalism; it keeps its total isolation. Possibility to write on manually and/or to With square key, 8 mm use the standard letteringsystems; the maximal letterheight is 8 mm. Usefull dimensions of letters: 8 x With triangular key, 8 mm With 2 keys 434 Spare keys are available on request. Outside dimensions: 30 x 83 x 5 nserts Threaded inserts M8 (Type odge for rear panels) Threaded inserts M5 (Type odge for side panels) Overview of the range imensional drawings Specifications for tender documents Power dissipation values Page.2 Page.42 Page.64 Page Special tool for securing threaded inserts M ilo screws 7.2 x 26 mm to fix the busbar system.20

164 6 6 Pedestals P44/54 Width N 00 N 0 N Type 6 P44 Type actoryassembled, recessed lock P44 Kit form, recessed lock P44 Type 6 P54 actoryassembled, recessed lock P54 Kit form, recessed lock P54 Kitform, swing handle P54 x W x Type x W x 830 x 470 x x 470 x x 605 x x 605 x x 800 x x 800 x Pedestals P44/54 Mounting plate Pertinax with fixing bolts x W x 703 x 360 x x 495 x x 690 x ottom plate Polyester 3 mm with mounting bolts x W 427 x x x Wall fixing unit Two aluminium profiles with wall fixing lugs W Polyester bases Kitform x W x 900 x 450 x x 585 x x 780 x ccessories Louvre plate P its one ventilation opening. Package includes 2 grids and 4 nylon nails. Total insulation. RL 7035 ocument pocket 856 N 4 W x = 325 x 80 mm N 5 W x = 55 x 225 mm.2

165 RVS Stainless steel pedestals Pedestals pplications nergy distribution Recreation grounds able television Traffic regulation & signalling Telecommunications Market connections vent connections as distribution Standards wide range of stainless steel cabinets RVS for outdoor use completes the delivery program of outdoor enclosures. Together with the series of fibreglassreinforced polyester cabinets and the full range of UTS cabinets for subterranean solutions, it provides an extremely versatile product offering. RVS cabinets for outdoor use make it possible to offer professional aboveground solutions for cable networks, telecommunications, recreation grounds and other applications. The cabinets have partially sunken bases N N N 5002 dvantages lexibility in dimensions, colour and design. asy and cheap to recycle. uaranteed 30year service life. Maintenancefree. ood mechanical properties ( 60947). igh torsion resistance. Resists impact test with sharp point according to N igh K value. Twists and bends (no tears or holes) on impact. igh fire resistance. igh vandal resistance. Special designs rapidly available, even as single orders. Overview of the range imensional drawings Specifications for tender documents Power dissipation values Page.3 Page.44 Page.65 Page.86 eatures The cabinets can be placed on either concrete or stainless steel bases. They can also be adapted for wall mounting. The protection degree P43K 0 according to and N/ high mechanical impact resistance according to ensures that the cabinet is extremely vandal proof. ondensation is limited by the natural ventilation provided by labyrinth openings. Ventilation abinet side Roof.22

166 RVS onstruction abinets are made of 2 mm S 304 stainless steel with polyester surface treatment in RL ntigraffiti treatment available on request. Other RL colours available on request. oors are fitted with stainless steel hinged rods (8 mm) and the opened door is easy removable without tools. oors hinge pins turn in nylon bushings, no corrosion at critical points of rotation is possible Natural ventilation with protection degree P43. Large opening between doors and cabinet frame, no moisture accumulation is possible. utomatic condensation evacuation thanks to unique design of cabinet base. Natural ventilation thanks to labyrinth openings on top of the side panels and special base design. No internal moisture problems thanks to polystyrene plate inside the roof panel; any moisture formed is automatically discharged along vertical sides of cabinet. 3 point rod closing mechanism sliding in synthetic bearings for high cabinets and double door cabinets. single locking point mechanism for smaller doors. Standard handle suitable for profile halfcylinder lock. Other lock types are available on request. abinet suitable for fixing, with four M2 bolts, to concrete or stainless steel basements according to N The stainless steel fixing bolts are adjustable. Wall mounting brackets and a stainless steel bottom plate in the RL 7034 are available in case of wall mounting. our or six fixing holes in rear panel for mounting a mounting plate or frame. ables easily inserted thanks to removable bottom profile. (sill profile). uaranteed earthing independent of corrosionsensitive transitional surfaces. ustomisation on request door stop handle cable entry door cable entry door (inside) wall mounting Stainless steel pedestals.23

167 RVS Stainless steel pedestals P43K0 Pedestals with single door Pedestals with double door Standard delivery a plain door central locking system handle without lockinsert open bottom without mounting plate N 00 N 0 N N 2 N 3 N 4 Pedestal Type RVL 300 RVL 30 RVL 3 RVL 32 eight 650 x W x 650 x 460 x x 595 x x 790 x x 20 x Pedestals Mounting plate eight 900 Pedestal Type Type x W x MPL RVN x 460 x MPL RVN x 595 x MPL RVN x 790 x MPL RVN x 20 x RVN x 450 x RVN x 780 x Mounting plate Type MPN 300 MPN 30 MPN 3 MPN 32 MPN 33 MPN eight 000 Pedestal Type x W x RV x 595 x RV x 790 x RV x 20 x RV x 450 x RV x 780 x Mounting plate Type MP MP MP MP MP Pedestal eight 50 Type x W x RV 3 50 x 790 x RV x 20 x RV x 450 x RV x 780 x Mounting plate Type MP MP MP MP Pedestal eight 350 Type x W x RVS x 450 x RVS x 780 x Mounting plate Type MPS MPS ccessories ixation kit for mounting plate Special bolts and nuts Type R 200 R 20 R 2 R 22 R 23 R 24 ases in stainless steel Optional : kit for mounting fuse strips eneral accessories oor stop ocument pocket N 4 ocument pocket N 5 Paint touchup kit RL oor stop ocument pocket N 5 Paint touchup kit.24

168 RVS Pedestals with double door and 2 compartments eight 650 eight 900 eight 50 Standard delivery a plain double door central locking system / door handle without lockinsert / door N 2 x W x 650 x 20 x x 20 x x 20 x Type RVL 32 S ZZ RVN 32 S ZZ RVN 32 S 2 ZZ RVN 32 S 3 ZZ RV 32 S ZZ ouble door usefull width Left with one mounting plate in melamine over the total width of the pedestal with separation sheet in melamine P20 open bottom 2 Right Mounting plate usefull width outer dimensions compartment eight Z Width Y Left Y2 Right ig. 2 3 Stainless steel pedestals RV 32 S 2 ZZ RV 32 S 3 ZZ n stainless steel ase R 22 N 3 eight x 450 x RVN 33 S ZZ RVN 33 S 2 ZZ RVN 33 S 3 ZZ eight x 450 x RV 33 S ZZ RV 33 S 2 ZZ ase RV 33 S 3 ZZ n stainless steel R 23 Mounting plate in melamine Usefull dimensions: enclosures height minus 20 mm enclosures width minus 00 mm thickness 9 mm ig. ig. 2 ig. 3 ross section.25

169 ndustrial nclosures Notes Pedestals.26

170 ndustrial nclosures pplication guide / ecatalogue nsulated boxes nsulated wall mounting cabinets Wall mounting system enclosures Sheet steel distribution boards Pedestals.2 Uabinet Subterranean enclosures limate control eneral accessories eneral characteristics ndex.

171 Uabinet Underground cabinets Subterranean enclosures pplications esthetical solution Temporary connection at markets, fairs and events Low voltage distribution lass fibre connections T applications Mobile telephone networks Sewer installations kwh meter enclosures Telephone network Repeater ccess Modules Outdoor locations Market places ity squares arbours Railway stations Sports stadia and arenas irports Shopping centres ndoor locations actories Storage facilities Maintenance areas Sports halls vent halls ongress halls Shopping malls No obstacle at street level ully integrated solutions The cover can integrate paving materials xtra public space Safety over closed during use ue to iving bell system (oyle s law) the enclosure can be used without any problem immediately after a flood (tested by m water during 48 h) The user does not have to come close to the M s User compartment is separated from electricity supplier compartment Outgoing cables channelled through a cable chamber over load tested by OPR according to N 2425 (2.5 Ton) lectrically tested by Kema according to N and omplied to Rosguidelines (directives 200/95/) oncrete enforced with polyester fibers. over in stainless steel S 304 No damage due to flood ue to the diving bell system (oyle s law) the cabinet can be used without any problem immediately after a flood (tested by m water during 48 h, and proven reliable). Standards N NN N N 2425 imensional drawings Specifications for tender documents Page.46 Page.66.2

172 Uabinet Type Stadion (Stadium) haracteristics Technical features Subterranean enclosures ommon compartment for users and supplier. Maximum voltage 400/230V Maximum incoming rating 63 Maximum outgoing rating 32 requency 50z Maximum outgoing functions 8 Operating temperature 20 to +40 Level of immersion m above groundlevel over load 2.5 tons Maximum angle of cover opening 80 Lifetime 20 years imensions ( x W x L) 59 x 620 x 770 mm asic compositions Stadion Stadion 2 Stadion 3 Stadion 4 Stadion 5 Stadion 6 Stadion 7 Stadion 8 32/5P /5P 2 2 6/3P Main breaker kwh

173 Uabinet Type air Subterranean enclosures haracteristics Technical features Separated compartments for users and supplier. Maximum voltage 400/230V Maximum incoming rating 63 Maximum outgoing rating 32 requency 50z Maximum outgoing functions 8 Operating temperature 20 to +40 Level of immersion m above groundlevel over load 2.5 tons Maximum angle of cover opening 80 Lifetime 20 years imensions ( x W x L) 59 (569) x 708 x 230 mm asic compositions air air 2 air 3 air 4 air 5 air 6 air 7 air 8 32/5P /5P 2 6/3P Main breaker kwh

174 Uabinet Type Market haracteristics Technical features Subterranean enclosures Separated compartments for users and supplier. Maximum voltage 400/230V Maximum incoming rating 63 Maximum outgoing rating 32 requency 50z Maximum outgoing functions 2 Operating temperature 20 to +40 Level of immersion m above groundlevel over load 2.5 tons Maximum angle of cover opening 80 Lifetime 20 years imensions ( x W x L) 59 (569) x 04 x 95 mm asic compositions Market Market 2 Market 3 Market 4 Market 5 Market 6 Market 7 Market 8 32/5P /5P 2 2 6/3P Main breaker kwh

175 Uabinet nclosure for distribution applications Subterranean enclosures able connections haracteristics ables can be connected in two different ways: n the case of horizontally mounted switchboxes, they can be connected directly to the load distributor rails. n the case of swivelling arrangements, they are connected by means of flexible cables which are connected, using a clamping device installed especially for this purpose, to an underground cable with a maximum conductor gauge of 50 mm 2 ; the entire cable entry box is sealed by pouring in a liquid insulating compound. imensions: L x W x = 500 x 00 x 500 mm. over can be secured by means of a reduceddepth profile half cylinder lock Normal level of groundwater table should not extend above 30 cm below surface (street) level. Maximum permissible load 25 tonnes according to N 24 standard Under certain conditions the cover can be provided with a paving material or similar finish to make it blend in with its surroundings. n a hermetically sealed 5walled container (sealed compartment) with its open end faced upwards a 400 rated rail system is mounted on a hinged frame which accepts 6 fused load distributing rails also rated at 400. The maximum load per fuseprotected distributing rail must not exceed 250. The hinged construction, aided by a gas strut, can easily be tilted from the horizontal to the vertical position, whereupon it is accessible just like a normal aboveground switchbox. When the frame is in the horizontal position the upper sealed compartment, which is mounted to the underside of the hinged cover, can be swivelled until it is over the lower sealed compartment, causing a socalled air lock to be formed between the walls of the two superimposed sealed compartments. This prevents power distribution devices from coming into contact with water, even if the enclosure was to become fully immersed in water. Of course the enclosure may also be fitted with a horizontally placed distribution unit that lacks the swivel function. This unit is adequately protected, so fuses can be replaced without any risk of touching live parts accidentally..6

176 nclosure for telecommunications applications Uabinet pplications haracteristics Subterranean enclosures UTS enclosure for RM installations. Repeater ccess Module This enclosure has been designed specifically for housing sensitive electrical equipment such as is used for telecommunication links. The equipment is protected by a builtin enclosure (P65) which, in turn, is integrated into a sealed compartment. imensions: L x W x = 65 x 895 x 55 mm. The cover features a brass surfacemounted lock that accepts reduceddepth profile half cylinder lock Normal level of groundwater table should not extend above 25 cm below surface (street) level. Maximum permissible load 25 tonnes according to N 24 standard Under certain conditions the cover can be provided with a paving material or similar finish so that it blends into its surroundings..7

177 Uabinet Notes Subterranean enclosures.8

178 ndustrial nclosures pplication guide / ecatalogue nsulated boxes nsulated wall mounting cabinets Wall mounting system enclosures Sheet steel distribution boards Pedestals.2 eating Subterranean enclosures.7 Ventilation limate control eneral accessories eneral characteristics ndex.

179 eating eating units limate control K047 dvantages 40 unction Small heating units for enclosures are important accessories for guaranteeing operational safety of control and distribution units. They are mainly used to prevent formation of condensation or to maintain a minimum temperature inside the enclosure, that is, a few degrees above the temperature of the surrounding air. Operating principle nergy saving ynamic heatingup Selfregulating Temperaturelimiting Quick snapon fixing No maintenance Long endurance ompact housing Standards V UL on request pplications Switch cabinets, instrument cases, display panels, control desks, automatic bank machines, car park control systems, etc. itting Pushfit onto N 35 mm rail (N ). nstallation preferably at the bottom of the cabinet, at about 40 mm from the equipment itself. Small heating units are fitted with PT heating resistances (positive temperature coefficient semiconductors). The selfregulating and selflimiting semiconductor heating elements maintain a constant temperature on the heating surface of the small heating units. The aluminium casing transmits heat to the surrounding air by natural radiation. Special extruded sections ensure the heat is fully radiated. eating requirements calculation Using the formula: P = x Δ T x k P = power supplied by the resistance (W) = external free surface of the enclosure (m 2 ) ΔT = difference in temperature between the internal temperature after heating, and the external temperature, in K. k = thermal radiation coefficient: sheet steel: 5.5 W/m 2 K polyester: 3.5 W/m 2 K pproximation rule: recommended value 00 w/m 3 of enclosure volume. or an outdoor installation, the calorific power should be doubled. Several small heating units are better than a single large heating unit..2

180 eating eating units K04740 Technical data K Nominal voltage Power eating element eating body Protection class Protection level onnection imensions ( x ) V / (max. 265 V) 0 to 50 W selfregulating PT resistance anodised aluminium sections, test voltage 4000 V/3 sec P54 Series K047: silicon cable 2 x 0.75 m 2 length 300 mm Series 40: with terminals mm 2 Series K047: 25 x 60 mm Series 40: 70 x 60 mm Order codes W () max. () (mm) Wt. (kg) Pack. eating K () t ambient temperature eating unit L046 with fan Technical data Nominal voltage Power eating element eating body Surface temperature Protection class Protection level onnection itting an 220/280V 5060z 250 and 400W traditional heating element with builtin thermostat anodised aluminium sections ±75 P20 threepole terminal strip 2.5 mm 2 on N 35 mm rail rate: 35 m 3 /h without counterpressure ball bearing service: hrs at 20 With forced ventilation with an axial fan. Prevents formation of dangerous levels of condensation, and maintains a constant temperature inside the enclosure. Order codes L046 W x 80 x x 80 (mm) Wt. (kg) Pack..3

181 eating eating units V03 and VL03 (with fan) Technical data limate control V03: eating element, extra compact, flatter, only 22mm thick. VL03: V03 heating element with an axial fan to give optimal heat radiation. resh air drawn in from outside is heated and dried. f the fan fails, thermal power drops automatically to prevent overheating. pplications Nominal voltage Power eating element eating body onnection Surface temperature with fan itting Protection class an rate (without counterpressure) imensions ( x W x ) Weight Order codes V03 220/230V 5060z W traditional heating element with builtin thermostat anodised aluminium sections fivepole terminal strip 2.5 mm 2 45 at a distance of 50 mm on N rail 35 m 3 /h (00 50W) 08 m 3 /h ( W) 80 x 2 x 22 mm (00 50W) 9 x 5 x 22 mm ( W) 240 g (00 50W) 490 g ( W) Power 00W 50W 200W 300W 400W Pack. Telecommunications systems, control panels, display panels, control desks, bank cash machines, car park control systems. ompact heater with integrated ventilation R /550W 230V. eating capacity adjusts to ambient temperature. Safely cutout in case of fan failure. djustable temperature range. VL03 with fan 00W 50W 200W 300W 400W Semi conductor fan heater Technical data Nominal voltage Power urrent at make eating element Temperature regulation Optical indicator asing Protection class Protection level onnection itting xial fan imensions Weight pproval Order codes /230V 5060z 350 / 550W W / 230V W / 230V PT resistor self regulating djustment range 0 60 Thermostat control lamp Plastic, light grey (double insulated) P 20 4 pole terminal connector, 2.5 mm 2 on N 35 mm rail 45 m 3 /h, ball bearing service life 50,000 h at x 00 x 24 mm (xwx). kg UL file R Pack..4

182 eating KTO / KTS Temperature regulators unction ZK 0, KTO, KTS and ZR 0 elements regulate and control the temperature inside the enclosure by means of small heating elements, fans, heat exchangers and refrigeration units. hot ZK 0 Technical data ZR 0 cold eating Type ZK 0 KTO KTS ZR 0 Range of adjustment: Temperature ysteresis ontact type Power () Weight imensions ( x W x ) pplication diagram Protection level onnection itting ase M K nverter: single pole N 0 (4) 250V NO 5 (2) 250V resistive load 00 g 67 x 50 x 38 (see below) P20 () Values in brackets = inductive load cos ϕ = 0,60 pplication diagram ZK 0 ZR K N 0 (2) 250V resistive load 36 g 60 x 33 x 35 red button: heating K NO 0 (2) 250V resistive load 36 g 60 x 33 x 35 blue button: cooling, fan, alarm signal P20 P mm 2 screw connector push fit on N 35mm rail (N 50022) plastic UL 94 VO according to N 55042, N , N Order codes ZK 0 KTO KTS ZR K NO 0 (2) 250V resistive load 90 g 67 x 50 x 46 (see below) P20 Pack. L N Load Load 2 L2 N2 Load : heater Load 2: ilter fan, cooling equipment, signal device.5

183 eating umidity controller Technical data limate control The electronic temperature regulator and humidity controller controls the temperature and humidity level of the air independently of each other by switching resistive and inductive loads (e.g. small heating units and refrigeration units). T 02 Range of adjustment: Temperature ysteresis umidity Response time Power supply voltage ontact type Power () On/off indicator Weight imensions ( x W x ) Protection level onnection itting ase nterference protection K 50 %90 % 60 sec. 230V/5060z relay outputinverter contact 8 (4) 250V V 8 2V 5 35V L 40 g 50 x 67 x 43 P mm 2 screw connector push fit on N 35mm rail (N 50022) plastic UL 94 VO N according to V 0875 Order codes T Pack. () Values in brackets = inductive load cos ϕ = 0,80 Mechanical hygrostat The electromechanical hygrostat is designed to controle enclosure heaters so that the dew point is raised when a critical relative humidity of 65% is exceeded. n this way condensation and corrosion are effectively prevented. MR 02 Technical data djustment range Switching accuracy Voltage Switching capacity, max. load resistive load inductive load cos phi 0.8 inductive load L/R = 3 ms switching capacity, min.load contact type onnection asing Mounting Protection level imensions Weight 3595% relative humidity ±3% 250V 5 250V V 50V 75V 00 m / 20V change over contact terminals in casing 3 x 2.5 mm 2 Plastic, light grey on N 35 mm rail P 20 67x50x38 mm (xwx) 60 g Order codes Pack. MR

184 Passive ventilation nclosure ventilation Pressure differences occur because of temperature variations between inside the enclosure with a high protection degree and the environment. n case of vacuum, dust and humidity can be absorbed through the door seal and can enter the enclosure. s the humidity cannot exit the enclosure condensation may occur. n order to prevent this pressure compensation plugs or ventilation grids should be used. Louvre plate P44 ir vent (Px4) its one ventilation opening Package includes 2 grids and mounting accessories Total insulation Outlet 2000 mm 2 To allow ventilation and prevent condensation. ir vents are preferably mounted in the upper and lower part of the box M Pressure compensation plug P55 eating Outlet 3000 mm 2 Outlet 4500 mm 2 Ventilation grids P44 () Set of 2 ventilation grids rilling Ø 34.9 mm () f installed i.e. inside R corners, underneath PolySafe roof Kit of two pieces n a tightly closed enclosure, pressure differentials can occur during extreme temperature variations, such as day/night operation. The risk of dust and humidity being absorbed increases dramatically. The plug permits a controlled change in pressure. asy installation in each enclosure. Technical data imensions: dia 65.5 mm x 30.5 mm utout: dia 37 mm ixation with P 29 thread or nut Material: S / P ir inlet: ± 7 cm 2 Protection: P55 Remark: for optimal pressure compensation the use of 2 plugs, installed diagonally to each other, is recommended. Pressure compensation plug P66 ir vents P44 Kits of two pieces in polyamide Set of 2 pieces RL Two air vents must be mounted per enclosure to ensure sufficient air circulation and prevent condensation water. omplete with template and screws. ir vents are preferably mounted in the upper and lower part of the base..7

185 Ventilation hot nclosure ventilation olour RL 7035 asket included P54 as standard ilter fan selection On request: filter fans and exhaust filters type LS...K and type L...K in colour RL 7032 limate control cold The electrical operating elements built into a control enclosure, such as power converters, transformers, inductance coils, contactors, relays, etc., emit dissipation heat into the surrounding air. f this dissipation heat is not removed, it may cause the temperature inside the enclosure to exceed the temperature permissible for electrical equipment. This poses a hazard to, in particular, electronic components. The heat must therefore be removed to avoid malfunction and, ultimately, idle time. Natural aeration (by domes, gills, etc.) is not recommended, as the risk of contamination is very high and, in addition, the degree of protection of the enclosure cannot be maintained. n such cases, forced aeration with appropriate builtin filters is the answer. n this system, the cooler ambient air is sucked by a fan into the lower part of the control enclosure, simultaneously filtered, and then blown into the body of the enclosure. ere the air absorbs the dissipated heat and is then removed via an exhaust filter located in the upper part of the enclosure. n overpressure created simultaneously in the enclosure prevents dust particles penetrating any openings in the housing. Removing warm air by suction is not recommended, as the partial vacuum created within the enclosure would neutralise the dustprotective effect. The air flow (volume flow rate) of the filter fan depends on the total thermal loss and the temperature difference Δ t between the permissible interior temperature and the ambient temperature. The following formula applies here: V (m 3 /h) = 3. P (W) x.5 Δ T (K) V = required air flow (m 3 /h) P = thermal loss in watts (W) ΔT = interior/ambient temperature difference in Kelvin (K) 3. = constant numerical value of miscellaneous ventilation data.5 = 5% margin ir flows (m 3 /h) for thermal losses up to 3000 watts and temperature differences (T) of (K) can be taken from the selection chart. t is recommended that a 5% margin be added to allow for contaminated filter mats or extreme conditions. The air flows specified for the individual filter fans were measured in accordance with N t an air density of.2 kg/m 3, the tolerance is ±5%. ilter material Ntested VLON P5/350S, P5/500S or T3/290S filter mats (to N 2485) are used in the filter fans and exhaust filters. The material is thermally bonded. ehaviour in fire corresponds to N 53438, class. The P5/350S filter mat collects dust particles of a minimum size of 0 μm at a separation efficiency of 85%, while the P5/500S filter mat collects dust particles of a minimum size of 5 μm at a separation efficiency of 94%. f the dust particles are extremely fine, the supplementary, denser T3/290S filter mat may be used. This collects dust particles of a minimum size of 0.5 μm at a separation efficiency of 96% (please note the reduced air flow). Soiled filter mats can be cleaned by rinsing out with water, by beating, or by blowing through with compressed air (do not wring out!). ousing ousings are made of heatresistant S plastic (35 to +85 ), selfextinguishing to UL 94 VO, tracking resistance to 3k. olour RL Other colours available upon request. egree of protection Our filter fans are conform to relevant regulations. ontactvoltage proof to N 300. Resistance to foreign bodies and water to P54 (N 60529) is achieved by combining a horizontal air flow with a gasket, delivered as a standard. dvantages Serie LV filter fans offer the follow advantages: Quick mounting Snaps into the cutout, no screws needed Low shape Maximum protrusion of the cover is only 6.5 mm.8

186 Ventilation Selection of the filter fan and the exhaust filter Temperature difference Δ T (K) Thermal loss Pv (W) Volume (m 3 /h) Ventilation LV LV LV 00 LV LV 250 LV 300 LV LV 500 LV LV xample Parameters Thermal loss Temperature difference 500W 20K Selection LV V ilter fan + exhaust filter 5 ilter fan free blowing with filter mat P5/500S.9

187 Ventilation ilter fans and exhaust filters Standard delivery ilter fan 230V 50/60z P54 sealing included standard filter mat P5/350 S RL 7035 xhaust filter P54 sealing included standard filter mat P5/350 S RL 7035 limate control Type LV 80 (2) LV 85 ()(2) LV 00 (2) LV 200 LV 250 LV 300 LV 400 LV 500 LV 600 LV m 3 /h utout in mm (3) 68 x x x 92 6 x 6 25 x x x x x x 292 Type V 80 V 80 V 00 V 200 V 250 V 300 V 400/500 V 400/500 V 600/700 V 600/ m 3 /h () 24V (2) P5/50S (3) etail drawing see page.47 Technical data filter fan ilter fan 230V 50/60z ilter fan type xhaust filter P54 & sealing is standard ree air flow m 3 /h n combination with exhaust filter m 3 /h Standard filter mat P 5/50 S (67 % efficiency) Standard filter mat P 5/350 S (85 % efficiency) Optional filter mat P 5/500 S (94 % efficiency) ree air flow m 3 /h n combination with exhaust filter m 3 /h Optional filter mat P 5/350 S + fine filter mat T3/290 S (96 % efficiency) ree air flow m 3 /h n combination with exhaust filter m 3 /h Power input 230V 50/60z W urrent 230V 50/60z Noise level d () Service life hour Speed rpm Temperature 0 to +55 pproval /UL/S Turn motor 80 to change from blowing to sucking (reduced air flow) Suction version can be ordered as option 5V on request 400V on request 24V on request 2V on request Options Spare filter mat P5/350 S Spare filter mat P5/500S ine filter mat T3/290S asket P LV 80 V 80 yes 5 2 yes 5/4 22/6m / yes yes yes yes 8896 LV 85 V 80 yes 20 6 yes 3 (24V) 30m yes yes standard yes 8897 LV 00 V 00 yes 25 5 yes 2 70m /3200 yes yes yes yes yes yes yes imensional drawings Page.47.0

188 Ventilation asket (spare part) ilter mat (spare part) P54 Polyethyleen P5/50S degree of separation 67% filter class (4) 2 (U 2) P5/350S degree of separation 85% filter class (4) 3 (U 3) P5/500S degree of separation 94% filter class (4) 4 (U 4) T3/290 S degree of separation 96% filter class (4) 4 (U 4) Type Type M 85 P M 85 P M 5 P Type M 235 P M 035 P M 335 P M 435 P M 435 P M 735 P M 735 P Type M 200 P M 0 P M 300 P M 400 P M 400 P M 700 P M 700 P Type M 300 T M 400 T M 400 T M 700 T M 700 T Ventilation (4) N N LV 200 V 200 yes yes LV 250 V 250 yes yes LV 300 V 300 yes 5 90 yes LV 400 V 400/500 yes yes LV 500 V 400/500 yes yes LV 600 V 600/700 yes yes LV 700 V 600/700 yes yes / /300 yes yes yes yes yes 9/ /300 yes yes yes yes yes / /300 yes yes yes yes yes / /3030 yes yes yes yes yes /6 0.24/ /320 yes yes 8828 yes yes / / /2800 yes yes yes yes yes /55 0.5/ / yes 8894 yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes.

189 ndustrial nclosures Notes limate control.2

190 ndustrial nclosures pplication guide / ecatalogue nsulated boxes nsulated wall mounting cabinets Wall mounting system enclosures Sheet steel distribution boards Pedestals Subterranean enclosures limate control eneral accessories eneral characteristics ndex.

191 ndustrial nclosures Metric ompression glands Metric P68 in polyamide (RL 7035) Lock nuts in polyamide Metric (RL 7035) Metric rill lamping L L2 L3 Keywidth size 2 (mm) range Sw (mm) Metric size Width Thickness Keywidth (mm) 3 M2 Sw (mm) M , M M M M M M M eneral accessories M M M M /68* *body 68 / nut 65 Temperature : 30 up to Temperature : 40 up to + 00 M M M M ompression glands Metric P54 in polystyrene (RL 7035) lanking plugs Metric P54 in polyamide (RL 7035) Metric rill lamping L L2 L3 Keywidth size 2 (mm) range Sw (mm) Metric size Width Thickness Thread L2 (mm) 2 L length (mm) M M , M M M M M M M M Temperature : 30 up to M M M Temperature : 40 up to + 00 M

192 Metric ndustrial nclosures Reducing ring Metric P54 in polyamide (RL 7035) onnection thread grummet Metric in polyethylene (RL 7035) Metric size Thread (mm) Keywidth Metric size S (mm) (mm) 2 (mm) 2 L L2 Sw (mm) M20 M M25 M M32 M M40 M M50 M M63 M Temperature : 40 up to + 00 Temperature : up to M M M M M M M M thickness s diameter d diameter d2 eneral accessories Universal cable entries Metric P54 in polyethylene (RL 7035) Metric size able section Thread in mm 2 (mm) L L2 M M M M M Temperature : 40 up to

193 ndustrial nclosures Universal cable entries (grey) Max. Ø rill Ø cable P (mm) olour grey grey grey grey 8529 eneral accessories Min. Ø Max. Ø rill Ø cable P (mm) olour grey grey grey grey grey Max. Ø cable P olour 3.5 grey grey grey 2 2 grey

194 ndustrial nclosures Terminals ranch terminals pole terminal 6.5 x 9 mm bars 63 Phase bar black 2 or Nrail mounting pole terminal with cover 60 6 x 0 mm 2 and 2 x 6 mm 2 To clip on 2 x 2 mm bar or Nrail mounting arth bar green pole terminal 2 x 5 mm bars 60 or Nrail mounting Protective screen for arthneutral bar 2 x 5 mm Length.2 m + 50 clamps + 50 nuts Max. distance between supports: 200 mm To use with support x 0 mm 2 and 2 x 6 mm 2 To clip on 2 x 2 mm bar Neutral bar blue 6 x 0 mm 2 and 2 x 6 mm 2 To clip on 2 x 2 mm bar x 6 mm 2 ixation on Nrail eneral accessories 6008 Support for four bars 2 x 5 Max. distance between support: 200 mm arth bar 2 x 4 with 3 clamps Screw fixation or Nrail mounting Use with above bars Neutral clamp with screw fixation (also snap on bar 2 x 2) able on bus bar connection 4 connections possibility luminium cable can be connected ar thickness: max. 2 mm ar width: no limit 3570 mm 2 cable cables 3 cables connections (6 mm 2 ) 9050 mm 2 cable cables 3 cables connections (25 mm 2 ) nsulation hood in rubber or terminal 3570 mm or terminal 9550 mm Neutral clamp with screw fixation ar on busbar connections Main Secondary Total bar thickness bar bar Min. Max able on bar connection Max. Ø able ar thickness ar width cross (mm 2 ) (mm) (mm) 0 to 50 5 to to 35 3 to to 20 2 to 5 5 to 2.5

195 ndustrial nclosures Terminals for l and u cable 06 mm2 Terminals 2535 mm2 eneral accessories 4 terminals with max. capacity Single compression unit: 4 x 4 mm 2 4 x 6 mm 2 4 x 0 mm 2 3 x 6 mm 2 ouble compression unit is optional ixation arth terminal 06 mm 2 with screws without on Nprofile without 48 with screws with 46 on Nprofile with 48 with screws without Without insulation hood compression nut l/u cable compression nuts l/u cable With insulation hood compression nuts l/u cable With insulation hood and Nrail fixation compression nuts l/u cable nsulation hood ouble compression unit Set of 4 compression nuts nsulated hood n rubber onduct through terminal 6 mm 2 with double clamp onductors 4 6 mm 2 500V l conductors 4 25 mm ouble compression unit Set of 4 compression nuts Key nsulated key M20 000V for terminals 2535 mm 2. able connection for outer lines Section mm mm mm mm

196 ndustrial nclosures ocument pocket Self adhesive Surfacemounted windows N W x 80 ncluding drill template and mounting x 60 mm 2 mod. N 5 transparent Marking strip Selfadhesive lanking plates W x m or 4 modules break off /2 module x 96 mm 4 mod x 30 mm 6 mod x 63 mm 8 mod x 200 mm 0 mod Screwed P eneral accessories m Spare blank plate for screening off inged, with gasket P55 rectangular openings 3 3 andle eigth 50 mm With reinforced rib + screws Made of Vyncolite 4 Screwed P67, with indication strip nclosure lighting 230V 50/60z W 4 4 With magnetic attachment 355 x 65 x 65 mm 8892 With Schuko socket 250V/6 5 Screwed P67, without indication strip 882 With socket 250V/6 Without cover over for lamp

197 ndustrial nclosures eight extension studs eight extension studs L (mm) Ø Ø 0 M4 M4 Type M Type M L (mm) Ø 60 M6M6 5 M4 M M6M6 20 M4 M M4 M L 2 30 M4 M M6 M6 eneral accessories 60 M4 M4 65 M4 M4 97 M4 M4 02 M4 M Type M4M M6M4 M4 9,5 5 9 M6 eight extension studs nsulated nuts (grey RL 7035) Ø M4 5 3,2 8,5 M4 L (mm) Ø 5 M6M6 20 M6M6 25 M6M6 Type M M5 8 7,0 0 M5 4 M6 22,3 20,4 9 M6 7 M8 25,3 24,2 0 M M6M M6M6 45 M6M M6M6 65 M6M M6M6 80 M6M M6M6 20 M6M L 9 M6 9,5 M6.8

198 ndustrial nclosures Screws luminium profiles SW Screws M6 with flanges Profile length 3 m M Screws M6 in PV for cover plate (sealable) M6 rackets L , Ø , eneral accessories , M6 2 L ,5 4, M L

199 ndustrial nclosures alvanised profiles Nuts in metal Profile 5 x 8 x Length: 3 m M M 0 4 eneral accessories N profile 35 x 7.3 x Length: 3 m 869 Profile 30 x 5 x.5 Length: 3 m M4 M6 M6 M M 0 4 M Nuts in PV.5 Sliding nuts for 30 x 5 M M M 0, Sliding nuts for 25 x 0 M Sliding nuts 8263 u profile 2 x 5 with threat M 5 Length: 3 m onnectors + screws M 5 x 3 Max. 2 x 0 mm 2 per connector or perforated mounting plate olt M4 olt M5 olt M6 or use on symmetrical Nrail eigth: 2 mm eigth extension studs

200 ndustrial nclosures ixation material Profiles Sliding contact + screw M4 Type ( 5 x 8) Profile Width of length the box 00 mm mm Sliding contact + washer + screw M Set for meter fixation M Screw M5 for meter fixation L = mm 250 mm 320 mm 506 mm 550 mm Type ( 5 x 8) Profile Width of length the box 0 mm mm 295 mm 48 mm eneral accessories 525 mm Screw M5 for meter fixation L = 2 mm Type U () Profile Width of length the box 90 mm mm Screw M 4 x mm 200 mm Sliding nut M4 Washer M mm 276 mm 320 mm 506 mm mm 600 () N /bl Type Z ( 5 x 8) Profile eightof length the box oupling kit mm 220 mm 290 mm ross fixation for profiles 405 mm 476 mm 520 mm

201 ndustrial nclosures Notes eneral accessories.2

202 ndustrial nclosures greements bbreviations dvantages of polyester enclosures egrees of protection ngineering specifications Legal units imensional drawings Multiox VJox PO Street lighting pole boxes R PolySafe VMS ixorail Senior Modula 630K Modula Plus 2 3 3/ 3/ 4 6 RVS Uabinet Ventilation Specifications for tender documents Multiox VJox PO R PolySafe VMS ixorail Senior Modula 630K Modula Plus 2 3/ & 3/P 3/ 3/P 4 6 RVS Uabinet Power dissipation values VJox PO R PolySafe VMS ixorail Senior Modula 630K Modula Plus RVS eneral characteristics.

203 ndustrial nclosures greements bbreviations S ustralia l luminium greements / bbreviations ÖV S, MKO ST UT V ustria elgium anada enmark inland rance ermany STM S NL u N.. merican Society for Testing Materials ritish Standards uropean ommittee for lectrotechnical Standardisation (omité uropéen de Normalisation lectronique) enelec ertification greement opper eutsche nstitut für Normung e.v. dison thread nternational lectrotechnical ommission S ST MQ KM reat ritain reat ritain taly Netherlands P.. M.. NN N N Protection degree Metric thread elgian Standards (Norme belge / elgische norm) Netherlands lectrotechnical ommittee (Nederlands lektrotechnisch omité) rench Standards (Norme française) NM NMKO RT North merica Norway Portugal P 2P 3P 4P Unipolar ipolar Tripolar Tetrapolar Spain P.. Thread following N (Panzerrohrgewinde) SMKO Sweden RL.. olour Standard (usschuss für Lieferbedingungen und ütesicherung) SV Switzerland V Verband eutscher lektrotechniker UL, N, OS UR U.S.. U.S.. Lloyd s Register of Shipping.2

204 ndustrial nclosures dvantages of polyester enclosures Temperature resistant Temperature resistant Normal corrosion resistance cid rain Saline corrosion resistance Sea shore xtreme corrosion resistance ndustry mpact resistance Up to 50J Total insulation Polyester enclosures provide protection against indirect electrical contact Maintenance free Self extinguishing Limit fire propagation ire retardant Protect equipment dvantages of polyester enclosures alogenfree No toxic gas release in a fire orrosion resistant Total insulation Self extinguishing oloured in mass U.V.resistant igh P rating asket tongue/groove arrangement Polyurethane gasket no joint gasket stick on bottom and sides Temperature resistant Resist to wide temperature variations without modification of properties (RP: 50 to +50 ) Lightweight Weight: /4 of steel asy to handle mpact resistant onstant quality ecause of machine moulding nstaller friendly asy to work (standard tools) asy to install (mounting feet, lightweight) asy to maintain (when scratches occur, some vaselin gives back appearance of RP) esthetic Suitable for indoor/outdoor designs igh P rating ondensation limiting Reduced change of inside condensation versus metallic enclosures Lightweight Technical data on protection degrees, see pages.4.5 on materials, see page.6.8.3

205 ndustrial nclosures egrees of protection of the electrical equipment up to 000V a.c. and 500V d.c. P 2 according to (200) and N (99) Protection of persons against contact with live parts Protection of equipment against ingress of solid foreign bodies 2 Protection against ingress of liquids 0 Test No protection 0 Test No protection gainst access with hand and ingress of solid objects greater than 50 mm gainst vertically falling drops egrees of protection gainst access with finger and ingress of solid objects greater than 2 mm gainst access with tools and ingress of solid objects greater than 2.5 mm gainst access with wires of strips and ingress of solid objects greater than mm omplete protection against contact with live parts and ingress of harmful deposits of dust omplete protection against contact with live parts and ingress of dust gainst drops of falling liquid at an angle up to 5 from the vertical gainst water falling in rain at an angle up to 60 from the vertical gainst water splashed from any direction (over 360 ) gainst water jets from any direction (over 360 ) gainst water projected in powerful jets as from heavy seas 7 gainst immersion in water under defined conditions of pressure and time 8 gainst continuous submersion in water fter 0 strokes, the enclosure should show neither visible crack of damage that might jeopardize the protection degree P Protection against external mechanical damage ccording to NN 2000 mpact strength ammer mass (kg) M = 0.5 M = 0.5 M = 0.5 M = 0.5 M = 0.25 M = 0.5 M = 0.5 M =.5 M =.5 M = 5 M = 5 M = 5 M = 5 all (m) h = 0. h = 0.5 h = 0.2 h = 0.25 h = 0.2 h = 0.2 h = 0.4 h = 0.27 h = 0.4 h = 0.2 h = 0.4 h = h = 0.4 mpact energy (J) xplanation The standard NN 2000/ was valid untill pril 5, 997. The tables mentioned above are classified according to the impact energy. The Pxx3 values and the Kvalues can not just be compared to each other, because there exists a difference between the form of the hammer and the K * = no protection Protection against external mechanical damage ccording to N and mpact strength ammer mass (kg) * M = 0.25 M = 0.25 M = 0.25 M = 0.25 M = 0.25 M = 0.25 M = 0.5 M =.7 M = 5 M = 5 M = 0 all (mm) * h = 56 h = 80 h = 40 h = 200 h = 280 h = 400 h = 400 h = 300 h = 200 h = 400 h = 500 mpact energy (J) * number of tests. n that case, it is impossible to set up a conversion table. Notice that no value was defined to replace the Pxx. f a shock resistance higher than K0 is needed, the new standard will only provide a recommendation. The Kvalue is shown with a figure of two numbers to exclude the confusion with the Pxx3 value

206 ndustrial nclosures egrees of protection Type ntended use and description Type ntended use and description Type ntended use and description 2 3 3R 3S ndoor use, primarily to provide a degree of protection against limited amounts of falling dirt. ndoor use, primarily to provide a degree of protection against limited amounts of falling water and dirt. Outdoor use, primarily to provide a degree of protection against rain, sleet, wind blown dust and damage from external ice formation. Outdoor use, primarily to provide a degree of protection against rain, sleet and damage from external ice formation. Outdoor use, primarily to provide a degree of protection against rain, sleet, windblown dust and to provide for operation of external mechanisms when ice laden P ndoor or outdoor use, primarily to provide a degree of protection against windblown dust and rain, splashing water, hosedirected water and damage from external ice formation. ndoor or outdoor use, primarily to provide a degree of protection against corrosion, wind blown dust and rain, splashing water, hosedirected water and damage from external ice formation. ndoor use, primarily to provide a degree of protection against settling airborne dust, falling dirt and dripping noncorrosive liquids. ndoor or outdoor use, primarily to provide a degree of protection against hosedirected water and the entry of water during occasional temporary submersion at a limited depth and damage from external ice formation. ndoor or outdoor use, primarily to provide a degree of protection against hosedirected water, the entry of water during prolonged submersion at a limited depth and damage from external ice formation. 2 2K 3 ndoor use, primarily to provide a degree of protection against circulating dust, falling dirt and dripping noncorrosive liquids. ndoor use, primarily to provide a degree of protection against dust, spraying of water, oil and noncorrosive coolant. egrees of protection Rating of enclosures following UL 50 and S 22.2 no. 94M9 nclosure 2 3 3R 3S P 2 2K 3 VJO Standard With raised cover, standard With stainless steel hinges With raised cover with stainless steel hinges With plastic hinges With raised cover with plastic hinges Window 8" x 4" factory assembled Window 8" x 4" factory assembled PO With polyester cover With polycarbonate cover With hinged cover With polyester cover and stainless steel hinges With polycarbonate cover and stainless steel hinges With polyester cover and plastic hinges With polycarbonate cover and plastic hinges With polyester cover and depth extension frame With polycarbonate cover and depth extension frame With hinged cover and depth extension frame With polyester cover, depth extension frame and stainless steel hinges With polycarb. cover, depth extension frame and stainless steel hinges With polyester cover, depth extension frame and plastic hinges With polycarbonate cover, depth extension frame and plastic hinges VMS Single Modular system Modular system using coupling set With hinged cover With external plastic hinges R Standard PolySafe actory assembled with single door actory assembled with double door actory assembled coupled cabinets actory assembled with drain ventilators.5

207 ndustrial nclosures Plastics dvantages of plactics ngineering specifications plastic is a material that can be formed and shaped into finished articles using heat (thermoformed). t has a molecular structure that consists of very long chains of polymers formed by the interaction of many molecules (monomers) or molecular pairs. distinction is made between thermoplastics and thermosettings. Thermoplastics Made by injection of the molten plastic into a cool mould. Parts formed from thermoplastics can be repeatedly softened by an increase of temperature. Most thermoplastics are soluble in a suitable organic solvent. Thermosettings Made by forming the plastic objects in a hot mould. Once formed, it becomes substantially infusible and also insoluble because of the crosslinked molecular structure. Thus products from materials made using thermosettings do not melt upon heating and are practically insoluble to most commercial solvents. Some softening under the effect of commercial solvents is however possible. ouble insulation ensures perfect safety against direct and indirect contact. The frame does not need to be earthed. Unlikely metals, plastics are corrosionresistant. The enclosures are homogeneous, thus they do not require any maintenance even when scratched, as only more of the same materials will be exposed. ue to their light weight plastic enclosures can be very easily handled and installed. Technical data of plastics Properties Standards Unit Polyester glassfibre reinforced Mechanical mpact strength Notched impact strength lexural strength Tensile strength lectrical Tracking resistance Surface resisitivity Special resistivity ielectric strength Physical eflection temperature Vicat softening point Temperature resistance olour fastness Tropicalisation and resistance to mould and fungus growth Water absorption ensity lame resistance Oxygen index lammability ot wire resistance Toxicity of fumes SO79 SO 79 SO 78 SO SO 74/ SO 306/50 continuous SO SO 62/ 96h SO 83 SO 4589 UL 94 (3 mm) 6952 SO 465 kj/m 2 kj/m 2 MPa MPa V/50dr omparative fig. Ω cm kv/mm lue wool scale 8 mg kg/dm 3 % O2 % l K > to no degradation halogenfree.6

208 Special features Polyester (UP) thermoset derived from unsaturated polyester resins reinforced with glass fibres. Readily worked with common tools such as drills, punches and saws. Polyester enclosures are ideally suited for outdoor installations and use in hot, humid and/or chemically agressive environments. The glassfibre has a minimum diameter of 2 μ and is considered as not harmfull. Polystyrene and related polymers (PS/S/S) Polystyrene is a general purpose thermoplastic with good electrical properties. Where higher impact resistance is needed, styrenebutadiene (S) or acrylonitrilebutadienestyrene (S) is used. Polyurethane (PUR) Thermosetting material, with good chemical resistance. n its foamed and elastic form it is used for gaskets. Neoprene rubber (R) lastomer with excellent chemical resistance and excellent flame resistance. ndustrial nclosures thylenepropyleneterpolymer (PM) lastomer with good chemical resistance and excellent aging resistance. Polycarbonate (P) Thermoplastic with high impact resistance over a wide temperature range. The UVstabilised grades can be used for outdoor applications. Polyphenylene oxide (PPO) Thermoplastic with good mechanical rigidity and excellent dimensional stability. This material is normally not used for outdoor applications because of its tendency to discolour when exposed to UVradiation. Polyamide (P) Thermoplastic with good mechanical, thermal and electrical properties. t is resistant to most commonly used solvents, but is readily attacked by acids. Polybuthyleneterephtalate (PT) Thermoplastic with good electrical, chemical and thermal resistance. Polyvinylchloride (PV) Thermoplastic with good resistance to weathering and excellent flame resistance. ngineering specifications Polycarbonate Polycarbonate glassfibre reinforced PPO P6 (2.5% humidity) PV no rupture 3050 no rupture no rupture no rupture no rupture 65 K K K75 > K K to no degradation to no degradation to no degradation to no degradation to no degradation to V2 850 halogenfree V 960 halogenfree V 960 halogenfree V2 650 halogenfree 43 to V0 960 halogens.7

209 ndustrial nclosures Resistance against submersion at room temperature Product UP P P PS/S S PPO PT PV PP PUR Neoprene PM ngineering specifications Water Seawater cid, diluted cid, conc. cid, oxid. lkalis, diluted lkalis, conc. ammoniac Salt, aqueous sol. chlorides lcohols Ketones acetone sters nbutylacetate thers ydrocarbons aliphatic white spirit ydrocarbons aromatic xylene ydrocarbons halogenated chlorobenzene Mineral oils Oils and fats Propylene glycol Nitrobenzene Phenol S S S NS NS L NS S S L L L L L S S NS L L NS S S L NS NS S S S L NS L NS S L NS NS NS NS NS S S NS NS NS NS NS NS S NS NS S S NS NS NS S S S L S S S L S S S S S S L NS S S S L NS S S S L L S S S L L NS NS NS NS NS NS NS NS NS NS NS L S NS NS S S S S L S L S S NS NS NS NS NS L L NS NS NS NS S S NS NS S S S L NS L L S L NS L L L L S S L S L NS S S NS NS S S S S L S S S S NS NS NS NS L S S NS NS NS NS S S S NS L S S S S L S S S S S S S S S/L L S S S NS L L/NS S S S NS S S S L L NS NS L NS S L NS NS L NS L L L L NS NS NS S S S NS NS S S S L NS S S S S L S NS NS L L L NS NS 0NS NS L S NS L S S S S NS S S S S S S S L L NS NS NS NS NS NS NS NS NS L S Temperature limits (for continuous use) min. ( ) max. ( ) () y resistance is meant the maintenance of isolation and mechanical properties necessary for good functioning. n eventual changing outlook is not taken into consideration (ex. loose of gloss). bbreviations S = satisfactory UP: polyester PPO: polyphenylene oxide L = limited P: polycarbonate PT: polybutyleneterephtalate NS = not satisfactory P: polyamide PV: polyvinylchloride PS: polystyrene PP: polypropylene S: styrenebutadiene PUR: polyurethane S: acrylonitrilebutadienestyrene PM: ethylenepropyleneterpolymer () PS (standard): 0 PS (higher impact): 20 S: 20 S: 20 or satisfactory and lasting troublefree operation of outdoor enclosures, the following precautions are recommended Material selection Select proper enclosure material and gasket: sufficient U.V. resistance resistance to normal corrosion (e.g. acid rain) resistance to saline corrosion (e.g. sea shore) resistance to extreme corrosion (e.g. industrial sea shore) lassfibre reinforced polyester enclosures satisfy all those requirements. ce stagnation void water stagnation on top of enclosures. cing, deicing and dirt will deteriorate gaskets by allowing corrosive deposits in cracks. or Superpolyrel 400 we recommend the use of a rainhood. Ventilation f condensation inside enclosure will be harmful, there are two ways to avoid it: natural ventilation, made by creating openings in the enclosure to allow air to circulate and remove moisture. This can be done if the required protection does not exceed raintightness if the enclosure must be raintight and watertight (P55 or more), heating of the enclosure may be necessary to remove moisture..8

210 ndustrial nclosures Legal units (S), conversion and formulas Quantity Length Width eight, depth Radius iameter Way,waylength Wavelength rea Volume Plane angle Mass Time Period requency Rotationfrequency (No of revolutions) ngular velocity Linear velocity Light velocity Sound velocity cceleration Output orce Weight Pressure nergy, work Moment of force Quantity of heat Power Thermodynamic temperature lectrical current Voltage Resistance mpedance Power () Power () Single phase Threephase active reactive apparent active reactive apparent nergy onsumption ctive Single phase Threephase nergy onsumption Reactive Single phase Threephase Resistance conductors fficiency Motor slip Power mec Symbol ormule for proportions l w h r d s λ (S) V α, β, ϕ m t T f n n ω v, u, w c c a q p W, M Q P T, θ, U R Z P P Q S P Q S Wa Wa Wr Wr R h s Pn(Pmec) = l.b V = l.b.h f = / T n = β / t ω = β = t v = s / t a = δv/δt q = V/t = m.a = m.g p = / (S) W =.s W = P.t M =.r P = W / t P =.v R = U/ Z = U/ P = U. P=U..cos Q=U..sinϕ S = U. P= 3.U..cosϕ Q= 3.U..sinϕ S= 3.U. Wa= U..t.cosϕ Wa= 3.U..t.cosϕ Wr= U..t.sinϕ Wr= 3.U..t.sinϕ R = ρ.l/s η = Pn/Pt s = (nsnr).00/ns Pn=2π x M.n/60 Unit metre metre metre metre metre metre metre square metre cubic metre radian kilogram second second ertz (=/s) Newton Newton Pascal Joule (= N.m) Joule (= W.s) Newtonmeter Joule Watt degree Kelvin ampere Volt Ohm Ohm Watt Watt Vreactive Voltampere Watt Vreactive Voltampere Joule Joule Ohm percent bbreviation (symbol) m m m m m m m m 2 m 3, dm 3, cm 3, mm 3 rad, kg s s z rad/s rad/s m/s m/s 2 m 3 /s N (kg.m/s 2 ) N Pa (N/m 2 ) J (N.m) J N.m J W(=J/s) W(=N.m/s) K V Ω W W var W var V J J Ω % Related lightyear are liter stere (wood) degree,min,sec rotation ton minute, hour, day kilometer/hour earth acceleration hecto Pascal kilowatthour kilowatt degree elsius ρ in Ω mm 2 /m bbreviation (symbol) km, hm, dam dm, cm, mm, μm, nm ly a, ha, ca km 2, cm 2, mm 2 l hl, dl, cl, ml hl = 00 l st " rot. t min., h, d, ms, μs, ns kz,mz,z km/h g kn, MN hpa kj, MJ kwh kn.m,kn.cm,n.cm kj, MJ mw, kw, MW μ, m, k kv, mv, õv MΩ,kΩ,mΩ MΩ,kΩ,mΩ MW,kW,mW MW,kW,mW kvar kv, MV MW,kW,mW kvar kv, MV kwh kwh kvarh kvarh L in m Other units nch oot mile yard square inch gallon barrel pint pound ounce rpm, r/s rpm, r/s miles/hour [kgforce] bar mmmerc.col. mmwat.col. lb/squareinch electronvolt Ws=Nm calory therm horse power kcalory/hour degree ahrenheit S in mm 2 Symbol in ft mile yd in 2 gal bbl pt mg, μg lb oz miles/h [kgf] bar mm g mm 2 O psi ev cal therm hp kcal/h onversion in = 2.54 cm ft = 2 in = cm ly = 9.46 x 0 2 km mi = 609 m ; minaut = 852 m yd = m ; mi = 760 yd λ = c l / f ca = m 2 ; a = 00 m 2 ha = 00 a = m 2 in 2 = 6.45 cm 2 l = dm 3 ; gal = l bbl = 42 gal = 58.9 l (oil m) pt = l st = m 3 = π/80 rad = 60 = 3600 " tr = 2 rad = 360 t = 000 kg lb = 6 oz = kg oz = g day = 24 h ; h = 60 rpm = π / 30 rad/s rpm = rad/s mile/h =.6 km/h c l = km/s (vacuum) cg = 332 m/s in air at 0 g = 9.8 m/s 2 (elgium) [ kgf = 9.8 N] bar = 0 5 Pa ; hpa = 00 Pa mm g = Pa mm 2 O = 9.8 Pa psi = kpa ev = J kwh = J kcal = 4 87 J therm = k J hp = 736 W kcal/h =.63 W = K ; x = (x )K = 5/9 ; x = 5/9(x32) Ω = V / W = V. W = V. cos ϕ = P/S = P/ (P 2 +Q 2 ) S 2 = P 2 + Q 2 kwh = J kwh = J cos ϕ = Wa/ (Wa 2 +Wr 2 ) ρ u = 0,078 Ω.mm 2 /m Pn = useful power Pt = added power ns = f.60/p Pt = Pn/η Legal units.9

211 Multiox M M42 Polystyrene/Polycarbonate Polycarbonate (*) M Metric knockouts = M6/ imensional drawings M2 Metric knockouts = M6/ M22 Metric knockouts = M6/ M33 Metric knockouts = M20/ M Metric knockouts = M6/ (*) Smooth = one metric knockout on short side for power supply cord.0

212 Multiox M44 M85 Polystyrene/Polycarbonate Polycarbonate (*) M44 M52 Metric knockouts = M20 = M20/25 = M25/32 Metric knockouts = M6/ imensional drawings M53 Metric knockouts = M20 = M20/25 = M25/32 = M32/ M65 Metric knockouts = M20 = M32/ M75 Metric knockouts = M20 = M25/32 = M32/ (*) Smooth = one metric knockout on short side for power supply cord.

213 Multiox M87 Polystyrene/Polycarbonate Polycarbonate (*) M87 Metric knockouts = M20 = M25/32 = M32/ imensional drawings (*) Smooth = one metric knockout on short side for power supply cord

214 imensional drawings.3 VJox imensions J K L M N P R S T W Type VJ66 VJ86 VJ08 VJ08 VJ20 VJ20 VJ42 VJ42 VJ64 VJ64 VJ86 VJox Top view cover Top view base Section Section

215 PO ases PO PO 7 = insert standard delivered in PO boxes (base + cover) = with insert M4 or M6 PO 5 imensional drawings PO 3 PO 8 PO 4 PO 6 PO PO 2.4

216 PO oxes Wall mounting irect to the wall With stainless steel mounting brackets imensional drawings Transparant hinged cover PO inged cover with side flange With polyamide mounting brackets h b d d imensions h b e Type K M R S T V W Z PO PO 3 PO 4 PO PO PO 8 PO PO PO = thickness of mounting plate.5

217 PO utouts in side panels Side 85 imensional drawings Side 300 Side 370 Side 485 Side 555 Side 600.6

218 PO ableend boxes PO 3 entry 2 entries imensional drawings PO 4 PO 7 entry 3 entries.7

219 Street lighting pole boxes Type Type imensional drawings Type Type SL.000 Ø 6.6 SL

220 ndustrial nclosures Notes imensional drawings.9

221 imensional drawings.20 R abinets imensions R K L M N O P Q R T U V W Y Z , , , , ,5 48 Wall mounting irect to the wall y fixing lugs in polyamide y fixing lugs in stainless steel

222 R Mounting plates over plates Plain and with openings for Nrail equipment R imensions R 2 rows 2 rows 3 rows 3 rows 4 rows 4 rows 5 rows imensions x 26 2 x 324 Y imensional drawings over plates with cutout for individual modular cover plates imensions Type Mod. R R R R R R ndividual modular cover plate imensions

223 PolySafe nclosures imensional drawings Usable mounting space on the doors = = = = = = = = = = =V = = = = = =T = = W = = = =V = =W = = U = imensions Type K L M N O P R S T U V W 2 3 Y Y2 Y nclosure oor nclosure entres of entres for wall mounting Window Usable mounting space Thickness of dmissible external dimensions letthrough the mounting surface on the doors the mounting charge in kg dimensions plate plate = pertinax 5 mm 2 = metal perforated 2 mm 3 = pertinax 0 mm.22

224 PolySafe nner door djustable mounting plate Min. 25 Min. 46 Max. 96 imensional drawings djustable mounting frame in steps of 2.5 mm ontinuously adjustable mounting frame Max Min. 8 Min Max

225 VMS ases VMS 32 VMS 63 imensional drawings VMS 33 VMS 64 VMS 43.24

226 VMS ases Openings in the base side walls uiltin heights Side 220 Side 320 imensional drawings Side 440 Pivoting covers Side 640 Type imensions b h VMS x VMS x

227 VMS able end plates and universal cable stress releases Mounting brackets Side 320 imensional drawings Side 440 Type imensions a b c VMS x VMS x VMS x VMS x VMS x Side view entre dimensions 27 Y Y Y 27.26

228 VMS usbar supports horizontal 250 parallel imensional drawings horizontal 400 parallel parallel.27

229 ixorail Senior Surface mounting 20 imensional drawings 4 pole terminals imensions Type b ha 4 rows 48 mod rows 60 mod rows 96 mod rows 20 mod rows 44 mod with protective cover.28

230 Modula 630K nclosures imensional drawings imensions Stacked units imensions Stacked units ross sections 600 mm width 900 mm width.29

231 Modula Plus nclosure dimensions Width 400mm Width 650mm imensional drawings h h w3 d3 d2 imensions (mm) W d d2 d3 w3 h Width 900mm imensions (mm) W d d2 d3 w3 h imensions (mm) W d d2 d3 w w2 w3 h imensions between door and internal coverplate (top view) space functional units cable compartment.30

232 ndustrial nclosures Notes imensional drawings.3

233 Small pedestal imensional drawings.32

234 2 2 olumn cabinets 2N 2N 2N 2N imensional drawings 2 Mounting plates 2N 2N 2N/N.33

235 imensional drawings

236 3 3/P 20 3/P 2 imensional drawings 3/P 22 3/P 23.35

237 3 Polyester bases N 02 Polyester bases N 3 imensional drawings burialdepth The dimensions of the base fixation points are in accordance with N imensions N imensions N ottom plate To be mounted between pedestal and Nbase or as bottom plate of the enclosure. imensions N

238 3/ 3/ 3/ 2 imensional drawings ases N 2 burialdepth The dimensions of the base fixation points are in accordance with N imensions N

239 3/ 3/P 03 3/P 04 imensional drawings 3/P 05 imensions N J K ottom plate imensions N J K Polyester base imensions N No of holes imensions N

240 3/ 3/P 233 3/P 243 3/P 253 imensions N J K imensional drawings imensions N J K

241 imensional drawings

242 4 4 S T S2 imensional drawings T

243 6 600 imensional drawings M5 = for dodge insert M5 60 M8 = for dodge insert M8 M5 = for dodge insert M5 6 M8 = for dodge insert M8 M5 = for dodge insert M5 ottom plate Polyester base M8 = for dodge insert M8 burialdepth imensions imensions N 00 0 N 00 0 The dimensions of the base fixation points are in accordance with N

244 Notes imensional drawings.43

245 RVS Pedestals with single door imensional drawings ase * *Pedestals with removable sill profile imensions N Type W 00 RVL RVN RVL RVN RV RVL RVN RV RV imensions N Type 00 R R R R R R

246 RVS Pedestals with double door Two compartments * * *Pedestals with removable sill profile imensional drawings ross section imensions N Type W 2 RVL RVN RV RV RVN RV RV RVS RVN RV RV RVS imensions Type 2 Y Y2 Z RVL 32 S ZZ RVN 32 S ZZ RVN 32 S2 ZZ RVN 32 S3 ZZ RV 32 S ZZ RV 32 S2 ZZ RV 32 S3 ZZ RVN 33 S ZZ RVN 33 S2 ZZ RVN 33 S3 ZZ RV 33 S ZZ RV 33 S2 ZZ RV 33 S3 ZZ Remark: other dimensions identical to RVL 32 / RVN 32 / RVN 33 / RV 32 / RV 33.45

247 Uabinet Type Stadion (Stadium) imensional drawings Type air Type Market

248 Ventilation ilter fan LV 80 and LV 85 V 80 Ø x Ø imensional drawings ilter fan LV 200 V 200 snapon fixing screwtype fixing ilter fan LV V ilter fan LV snapon fixing screwtype fixing 3.5 V (49.0) 6.0 holes for screwtype fixing only 4 x Ø4.5 screwtype fixing.47

249 Ventilation ilter fan LV 300 V 300 imensional drawings ilter fan LV 400 holes for screwtype fixing only V 400/500 holes for screwtype fixing only ilter fan LV 500 V 400/500 holes for screwtype fixing only ilter fan LV V 600/ holes for screwtype fixing only.48

250 Ventilation ilter fan LV 700 V 600/700 holes for screwtype fixing only imensional drawings.49

251 ndustrial nclosures Specifications for tender documents Multiox Small multipurpose boxes The range comprises different basic box sizes, from 65 x 65 mm up to 36 x 254 mm, with up to 3 different cover depths and two designs: with grey lid with transparent lid. They are suitable for applications that require light weight and durability. The base is manufactured from glassfibre reinforced polycarbonate (type P) or polystyrene (type PS), both dyed in mass RL 7035 (light grey). lassfibre reinforced polycarbonate bases (type P) come with smooth side walls (only one Metric entry) or with several Metric knockouts. Polystyrene bases (type PS) come with smooth side walls or with several Metric knockouts. The lid is manufactured from transparent or opaque grey polycarbonate or grey polystyrene. The lid is fixed to the base by means of cover screws in polyamide. Polycarbonate boxes can withstand temperatures from 35 to +20, the polystyrene boxes temperatures between 40 and +70. The box offers maximum protection to the user and the equipment by means of total insulation and a protection degree as per and also complies with the impactresistance standard as per N and This protection covers the total volume of the enclosure according to N and boxes type P, P66K08 boxes type PS, P66K07 oxes are corrosionresistant and do not require any maintenance. Materials are halogenfree. oth types (P and PS) are selfextinguishing according UL94V2. oxes offer high resistance to chemical and aggressive influences. The box is secured to the wall by screws directly through the base, direct through the four corner shafts of the base (under the cover screws) or by using external mounting brackets. oxes may be fitted with external hinges and/or padlocking as a protection against unauthorised access. oxes can be combined in height and in width by means of a combi set. t is possible to mount N profiles (5x5x and 35x7.5x) as well as mounting plates. oxes type P bear the cul approval. Tailormade boxes are available upon request: coloured, painted, overprinted, machine finished, M shielded..50

252 ndustrial nclosures VJox Polyester NM sized boxes oxes are designed in accordance with the "Joint ndustrial ouncil" (J) US. The range consists of seven different sizes ranging from 86 x 86 mm (6 x 6 inch) to 49 x 440 mm (8 x 6 inch) in three designs: with screwed lid with stainless steel hinges with plastic hinges. The base and the lid are made of selfextinguishing, glassfibrereinforced and halogenfree polyester, dyed in mass RL 7035 (light grey). The glassfibre content is a minimum of 20%. The base also comes with four threaded inserts M4 for securing a mounting plate. oxes can withstand an ambient temperature of 50 to +50. The box offers maximum protection to the user and equipment thanks to the total insulation and the P67/P66 protection degree as per t also complies with impact resistance degree K0 as per N and This protection covers the total volume, protected space, of the box according to N and oxes are corrosionresistant and do not require any maintenance. The base is fitted with mouldedin mounting brackets suitable for external mounting. oxes have the UL certification mark, as per UL standard 508 types 3, 3R, 3S, 4, 4, 6, 2 and 3. They also comply with S certification mark as per 22.2 no. 94 types 3, 3R, 3S, 4, 4, 6, 2 and 3. oxes also bear the following certification mark: S ustralian Standards Specifications for tender documents.5

253 ndustrial nclosures Specifications for tender documents PO Modular polyester boxes The range consists of nine types with module 50/85 mm, with dimensions ranging from 85 x 50 mm to 600 x 600 mm in five different designs: with screwed polyester lid with screwed polycarbonate lid with screwed flap lid with hinged polyester lid ventilated with hinged polyester lid and lock. The base is made from selfextinguishing, glassfibrereinforced and halogenfree polyester, dyed in mass RL 7036 (dark grey). The glassfibre content is a minimum of 20%. The base also comes with a minimum of four M4 threaded inserts for mounting metal, perforated metal and pertinax (insulated) mounting plates, and also mounting frames for modular equipment. The base also has space for four M6 threaded inserts. The lid is manufactured: either from selfextinguishing, glassfibrereinforced and halogenfree polyester, dyed in mass RL 7035 (light grey) or from transparent polycarbonate. The design as flap lid: frame in selfextinguishing, glassfibrereinforced and halogenfree polyester, dyed in mass RL 7035 (light grey), the window in transparent polycarbonate. The box can withstand temperatures from 50 to +50 (peak). (35 to +20 for the box with polycarbonate lid). The useful mounting depth of the box can be expanded by means of depth extension frames without affecting the original protection degrees. The box offers maximum protection for user and equipment thanks to the total insulation and the protection degree as per and also complies with the impactresistance standard N and This protection covers the total volume of the enclosure according to N and box with screwed polyester lid, P67K0 box with screwed polycarbonate lid, P66K0 box with screwed flap lid, P67K0 box with hinged polyester lid, P55K0 ventilated box with hinged polyester lid and lock, P44K0. oxes are suitable for external mounting. oxes are corrosionresistant and do not require any maintenance. There are various ways of securing the box to the wall: using screws in the four corner holes using fixing lugs secured through the four corner holes using stainless steel fixing clamps, fitted directly to the rear of the base in the reinforcements provided. n all these cases, the P values and total insulation are guaranteed. ll boxes have the same depth and can be assembled by means of coupling frames. oxes have the UL certification mark, in accordance with UL standard 508 and also comply with the S certification mark as per 22.2 no. 94. boxes with polyester lid, types 3, 3R, 4, 4, 6, 6P, 2 and 3 boxes with polycarbonate lid, types 3, 3R, 4, 4, 2 and 3 boxes with flap lid, types 3, 3R, 4, 4, 6, 2 and 3. oxes also bear the following certification marks: S ustralian Standards 3399 exe. S 05T0034U Lloyd's Register of Shipping KM KUR S..52

254 ndustrial nclosures R Universal polyester cabinets The range comprises seven different sizes ranging from 35 x 25 mm to 035 x 835 mm in two different designs: cabinet with plain door cabinet with glazed door. The cabinet is manufactured from selfextinguishing, glassfibrereinforced and halogenfree polyester, dyed in mass RL 7035 (light grey). The glass fibre content is a minimum of 20%. The cabinet is fitted with four threaded pins and four nuts to secure perforated metal, Sendzimir zinc coated sheet steel or pertinax (insulated) mounting plates and mounting frames. The cabinet consists of two parts: the base and the door. The removable door is secured to the base by two hinges and the opening angle is a maximum of 80. n a closed position, the hinges are invisible. losure is controlled by a threepoint locking mechanism operated by a single central operating grip or handle (singlepoint closure for cabinets 300 x 200 mm and 400 x 300 mm), twopoint closing for cabinets 500 x 400 mm, 600 x 400 mm and 700 x 500 mm as an alternative. The door is fitted with a seamless seal and the total concept is such that stagnating water on the seal is avoided. doorlifter (for bigger dimensions) ensures the door takes its center position during closing. The four angles in the base are doublewalled. Ventilation against condensation can be done without the ventilation grids being visible when the cabinet is closed. The mounting frame or the mounting plate can be equipped and wired outside the cabinet. They are placed subsequently in the cabinet: either on the securing points in the rear of the base provided for this purpose, without any further arrangement being necessary or on special mounting supports which slide into the mouldedon profiles in the angles of the cabinet. The equipment is protected by a singlepiece cover plate, manufactured from selfextinguishing, glassfibrereinforced and halogenfree polyester, dyed in mass RL The cover plate is secured with snapon fixing screws, which can be easily removed by the use of tools. This guarantees the protection degree of P20 as for f required, the cover plate can be fitted with hinges. Protection of the modular devices can also be obtained by using individual modular cover plates (h = 50 mm) in PV material, also offering P20. These individual modular cover plates can be plain or with cutout for Nrail equipment. The cabinets can withstand temperatures from 50 to +50 (peak). The cabinet offers maximum protection to user and equipment thanks to the total insulation and protection degree P66 as per and also complies with the impactresistance standard N and P66K0 cabinets with plain door. P66K07 cabinets with glazed door. This protection covers the total volume of the enclosure according to N and The cabinets are suitable for outdoor use. The cabinets are corrosionresistant and do not require any maintenance. The cabinets are secured to the wall by: either four 304 stainless steel or polyamid mounting brackets, screwed along the back of the cabinet using stainless steel bolts which do not penetrate the back or directly by means of screws in the doublewalled corners or directly through the base by means of four screws, sealed by a non removable sealing cap. n these cases the P value and the overall total insulation remain guaranteed. The cabinets have the UL approval in accordance with UL standard 508 types 3, 3R, 3S, 4, 4, 2 and 3. They also comply with the S certification mark as per 22.2 no. 94 types 3, 3R, 3S, 4, 4, 2 and 3. The cabinets also bear the certification mark: S ustralian Standards Specifications for tender documents.53

255 ndustrial nclosures Specifications for tender documents PolySafe Multipurpose polyester cabinets The range consists out of fourteen types with module 250 mm, with dimensions ranging from 500x500 mm up to 250x000 mm, in one depth 320 mm and two different designs : cabinet infactory assembled with plain door cabinet infactory assembled with glazed door our stainless steel wall mounting brackets are also supplied. The cabinet is manufactured from selfextinguishing, hot moulded, glass fibre reinforced and halogenfree polyester, dyed in mass RL 7035 (light grey). The glassfibre content is a minimum of 25%. The cabinet exists out of a back panel, two side panels, a top panel, a base panel and a flushmounted door. The door is secured to the main structure of the cabinet by means of hinges, each step of 250mm, and its angle of opening is a maximum of 00. The hinges are not visible when the door is in closed position. losure is effected by a fivepoint locking mechanism (threepoint for widths 500 mm) controlled by a single central operating handle. The operating handle is suitable for all types of profile half cylinder locks (standard depth 40 mm, alternative depth 45 mm). doorlifter (for bigger dimensions) ensure the door takes its center position during closing. The standard depth of the cabinet is 320 mm, but can be increased to 640 mm by using a 320 mm extension kit. The cabinets can be coupled in height and in width by means of a coupling kit. The mounting plate (in pertinax, in Sendzimir zinc coated sheet steel or in perforated metal) can be set up and wired outside the cabinet. t is placed subsequently in the cabinet. The mounting plate is secured directly to the securing points provided on the back panel of the cabinet or mounted on four depth adjustment brackets (steps of 2.5 mm). The modular mounting frame for Nrail equipment is completed with modular functions height 50 mm, plain or with cutouts, or modular plain functions height 300 mm. They guarantee a protection degree of P20 with open doors. The addition of a rainhood allows for natural ventilation (P44/P54) in the cabinet. The cabinets are designed for wall mounting, floor standing and pole fixing. The cabinets are resistant to temperatures of 50 up to +50 (peak). The cabinet offers maximum protection to user and equipment thanks to the total insulation and the high protection degree P65 (P55 for cabinets with glazed door) according to 60529, N t also complies with the impactresistance degree K0 (K07 for cabinets with glazed door) according to N and This protection covers the total volume, protected space, of the cabinet according to N and The cabinets are suitable for indoor as well as outdoor use. The cabinets are corrosionresistant and do not require any maintenance. The cabinets are secured to the wall by means of stainless steel mounting brackets which are clinged and fixed on the back without using any screws. These wall mounting brackets can be mounted vertical or horizontal. The cabinets with rain hood are secured to the wall by means of four special simular brackets. cabinet can be placed on the ground by using a floor mounting frame which is anchored to the ground together with the cabinet. ll cabinets width 750 and 000 mm can be mounted on a Nbase by means of a N adaptor frame. n all these cases the P degree as well as the total insulation are guaranteed. The cabinets have following approvals: UL and S cabinets with single door: types 3, 3R, 3S, 4, 4, 2, 2K and 3. cabinets with double door: types 3, 3R, 3S, 4, 4, 2, 2K and 3. coupled cabinets: types 3, 3R, 3S, 2, 2K and 3. Standards: 60529, N 60529, N 62262, 62262, N 62208, 62208,

256 ndustrial nclosures VMS Modular enclosures system The range consists of five types with module 00 mm, with dimensions ranging from 320 x 220 mm to 640 x 440 mm. The bases are manufactured from selfextinguishing, glassfibrereinforced and halogenfree polycarbonate, dyed in mass RL 7035 (light grey). The glass fibre content is at least 20%. Securing points are fitted in the base to secure metal and pertinax mounting plates, mounting frames, busbars, etc., by means of selftapping screws. These securing points form rows parallel to the box edge and figure both in the base and top edge with a step between them of 25 mm. The bases, with four open walls, can be linked without screws using dowels. The open side walls are closed by means of clickin endplates which are locked by keys. The lid is manufactured: either from selfextinguishing, halogenfree polycarbonate, dyed in mass RL 7035 (light grey) or from selfextinguishing, transparent polycarbonate. The design as flap lid: the frame dyed in mass RL 7035, the window transparent, both in selfextinguishing polycarbonate. The useful mounting depth of the box, 57 mm, can be expanded using depth extension frames. The endplates are manufactured from selfextinguishing, glassfibrereinforced and halogenfree polycarbonate, dyed in mass RL 7035 (light grey) and available in three designs: as a blind endplate as a combi endplate with P or Metric knockouts as a cable entry endplate for cable input up to Ø 75 mm. The boxes can withstand temperatures from 20 to +80. The box offers maximum protection for user and equipment thanks to the total insulation and the protection degree as per and also complies with the impactresistance standard N and This protection covers the total volume of the enclosure according to N and individual, P65K07 coupled, P65K07 box with one depth extension frame, P65K07 box with multiple extension frames, P45K07 coupled with coupling set 2x220, P44K07 box with cable entry, P43K07 box with bridge, P55K07. The boxes are corrosionresistant and do not require any maintenance. The box can be secured to the wall in various ways: using screws in the four corner holes using stainless steel mounting lugs through the four corner holes using a supporting frame, consisting of at least two horizontal and two vertical profiles. f the assembly entails more than five boxes, a supporting frame is needed. busbar system up to 250 can be integrated by means of glassfibrereinforced polycarbonate busbar supports, with centre to centre distance between them of 320 mm, with a horizontal arrangement of the busbars (25250) or parallel arrangement of two busbars per phase (250250). These guarantee a thermal shortcircuit resistance between the phase rails with a maximum of 30k (0,3 sec) and a dynamic shortcircuit resistance between the phase rails of a maximum of 65k peak. The boxes have the UL approval, in accordance with UL standard 508 and also comply with S certification mark as per 22.2 no. 94: individual arrangement, types 2, 3, 3R, 3S, 5, 2 and 2K coupled, types 2, 3, 3R, 3S, 5, 2 and 2K coupled with coupling set 2 x 220, types 2 and 3R box with hinged cover, types 2, 5, 2 and 2K box with external hinges, type 2. The boxes also bear the KM KUR and comply with following standards: N S5486 Part N V 0660Part 500. Specifications for tender documents.55

257 ndustrial nclosures Specifications for tender documents ixorail Senior Type tested distribution enclosure conform to N Manufactured using sheet steel for the outer enclosure, and protected inside with insulated, selfextinguishing and halogenfree profiles. The sheet metal parts are pretreated with iron phosphate and protected with epoxy polyester powder paint RL 906 giving smooth finish. The range consists of 5 different sizes: two widths: 300 & 550 mm three heights: mm one depth: 20 mm or modular devices from 48 modules up to 44 modules per enclosure, with 2 or 24 modules per row. Standard equipped with a removable N rail frame in sendzimir zinc plated steel polyester cover plates, selfextinguish and halogenfree, with the necessary cut outs for the modular devices. The center distance between two N profiles is 37.5 mm The maximum depth for the modular devices is 92.5 mm with a wiring space of 75 mm behind the components Top and bottom of the enclosure are, for easy cable entry without any tool, equipped with a flexible cable entry per module width of 250 mm. The capacity of the top cable entry is 2 x 32.5 mm 5 x 9 mm 38 x 3.5 mm The capacity of the bottom cable entry is x 50.5 mm 2 x 32.5 mm 2 x 9 mm 28 x 3.5 mm 2 x.5 mm n the back of the enclosure knockouts are available for easy cable entry from the backside. The door is, by one hand, easy removable and adjustable without any tool. The opening is reversible without any mechanical reworking. The door may be plain or transparent if a visual control function is required. Standard closing with a handle without insert with one or three point closing mechanism depending on the height of the enclosure The standard handle is replaceable by other inserts and /or handles with or without key. The wallmounting fixation may be outside the enclosure with a set of 4 brackets or inside with screws going trough the backside, protected with plastic covers. The enclosure offers maximum protection to the user and equipment thanks to the total insulation and the protection degree P43 K08, according to 60529, N and N and The system enclosures comply with the standards N and The enclosures have the KM and approvals..56

258 ndustrial nclosures Modula 630K Type tested distribution boards according to N The cabinet is a "flat pack" sheet steel wall mounting enclosure for indoor use. Manufactured using sheet steel with mm thickness for the doors, top and side panels and 2 mm thickness for the cable entry plate on top & bottom. The rear panel, on the same time mounting plate is manufactured using sendzimir zinc plated steel with 2 mm thickness. The sheet metal parts are pretreated with iron phosphate and protected with epoxy polyester powder paint RL 7035 giving smooth finish. The range consists of 2 different sizes: in two widths: 600 & 900 mm six heights: external dimensions from 545 up to 295 mm Useful: ach functional unit with a multiple step of 50 mm in the height. Standard from 3 rows of 50 mm up to 8 rows of 50 mm one depth: 220 mm without door, 250 mm with door The rear panel allows the direct mounting and wiring of the functional units and provides access to the equipment, terminals and busbar system from all sides. unctional units, based on the dimension of a module of 50 x 500 mm, are available for modular devices from 8 modules up to 26 modules per enclosure, with 27 modules per row molded case circuit breakers, load break switches, terminals, and bus bars up to 630 unctional units for cable / bus bar compartment are also available vertical / horizontal separation screen allow the execution as a form 2 type tested assembly. The standard wall mounting enclosure offers also coupling facilities in width and height up to 2 rows with maximum 90 mm in the height. Those coupled enclosures can be placed on a base of 00 or 200 mm The door is easy removable and the opening is reversible without any mechanical reworking. Standard closing with one or two single point closing mechanism depending on the height of the enclosure. Plain or transparent doors are equipped with a cylindrical lock with key The standard lock with key 2432 is replaceable by a handle with or without key. The wallmounting fixation may be outside the enclosure with a set of 4 brackets or inside with screws going trough the backside. The enclosure offers maximum protection to the user and equipment thanks the protection degree P4 K 08, according to 60529, N and N and nclosures with transparent door obtain the protection P4 K 07. The type tested system enclosures comply with the standards N and The enclosures have the LOV approval. Specifications for tender documents.57

259 ndustrial nclosures Specifications for tender documents Modula Plus System enclosure for Low Voltage distribution panel from 60 up to 4000 onformity to standards The panels are complying to the standard N ll typetests and individual tests required by the standard have been done. nternal separation orm, orm 2 as option. Technical characteristics The panel is designed of kitform enclosures made from sheet steel, which can be stand alone and coupled next to each other. ach cabinet consists of a strong, welded top and bottom frame to which the vertical uprights are bolted. Top and bottom frame and vertical uprights offer a pattern of rectangular and round holes for easy fixation of functional units, depth profiles and busbars. They consist of three different compartments, all of them fully accessible from the front. The busbar compartment The main busbar is located in the top of the enclosure and is based on flat, rectangular copper provided with holes diameter mm for easy coupling and connection of wires and busbars in step of 25mm. ross section from 63x5mm up to 60x5mm. enter distance 90mm. The bars are provided with a bending at one end to allow easy connection with each other. The compartment for functional units The panels are equipped with individual functional units, consisting of mounting plates or mounting frames supporting one or more low voltage devices and covered with metal coverplates to prevent from accidential access to live parts. functional units for Nrail equipment functional units for meters functional units for Moulded ase ircuit reaker from 25 up to 250. The devices are mounted fixed in horizontal or vertical position functional units for Loadbreak Switches up to 350. The devices are mounted fixed in horizontal or vertical position functional units for ir ircuit reakers up to The devices are mounted fixed or withdrawable. The design of functional units allow quick and easy replacement or modification of the units. The cable compartment n integrated cable compartment located at the left or right side of the enclosure guides outgoing cables or contains vertical busbar based on flat, rectangular copper provided with holes diameter mm for easy coupling and connection of wires and busbars in step of 25mm. ross section from 63x5mm up to 60x5mm. enter distance 90mm. The bars are provided with a bending at one end to allow easy connection with each other. or rated current up to 630 a staircase type of busbar based on flat copper from 20x5mm up to 30x0mm is used for easy interconnection between the busbar and outgoing Low Voltage devices. The bars are provided with threaded holes M6 or M8 and can be covered by a protective shroud P20 as option. lectrical characteristics Rated operational voltage Rated insulation voltage Rated shortcircuit withstand current Rated current of the busbar system egree of protection The panel is designed for indoor use mbient temperature V 000V 70k / (s) up to 4000 P55 P30.58

260 ndustrial nclosures Notes Specifications for tender documents.59

261 ndustrial nclosures Specifications for tender documents Pedestals Polyester floor standing enclosures offer reliable housing for switching, distributing and protective equipment used in underground low voltage and communication networks as well as various kind of outdoor industrial applications. The bases are partly buried into the ground, guaranteeing a stable support for the equipped enclosure, and allowing easy and safe cable entry into the enclosure. The pedestals feature high protection degrees to protect both equipment and people. The enclosures have very high mechanical impact strenght for increased safety during many years. The design offers natural ventilation to prevent accumulation of condensation humidity inside the enclosure. The polyester has a low thermal conductivity, resulting in reduced temperature variations within the enclosure. The pedestals comply with following standards: 60529: P protection degree against ingress of foreign bodies N and 62262: K protection degree against mechanical impact : able distribution cabinets in power networks Small pedestal Small pedestal: 752 x 385 x 270 mm Light weight and easy to install by one person: 4.5 kg Sturdy base in P, colour RL 9005, and rainhood in RL The rainhood is secured onto the base with two vandal proof zamac screws. The base resists ground temperatures as low as 50 rrow indicators injected on the base front indicate burial depth and correct positioning. mounting plate is integrated with the base, provided with 3 slots for mounting of devices. The ventilated, thermoplastic hood guarantees a protection degree P23. lternatively, the base with polyester hood guarantees P43 and increased thermal stability in tropical temperatures. Protection degree K0 against external mechanical impacts according to N and Particularly suited for cable television networks..60

262 ndustrial nclosures 2 olumn cabinets olumn cabinets with integrated base: 097 x 433 x 240 mm 347 x 433 x 240 mm 622 x 433 x 240 mm 896 x 433 x 240 mm The base and the rear panel of the column are molded as one part. The base allows for stable installation of the column. nclosure made of hot moulded, glass fibre reinforced polyester in RL 7035 light grey. orrosion resistant, UV stabilized for outdoor applications, suitable for use in environments from 35 to Temporary exceeding temperatures will not be harmful. labyrinth design guarantees natural ventilation whilst maintaining a good protection degree. The rainhood shape prevents water stagnation on the roof. This guarantees a protection degree P44 according to The cabinets offer maximum protection to user and equipment: protection degree K0 against external impacts according to N and ully integrated locking clamp, suitable for operation by a half profile cylindric lock. The cylindric lock can be fitted in a recessed lock box, protected by a vandal proof plastic cap. Once unlocked, the enclosure can be accessed without tools by removing the frontal liftoff segments completely (not hinged). or easy access the roof can be opened, offering an opening angle of 90. ixing holes for threaded inserts M6 are provided in the rear panel allowing direct mounting of busbars, a frame, a mounting plate or components. Particularly suitable for outdoor installation of fused switchgear, 4pole busbars, etc. 3/ & 3/P Nsize pedestals abinets for Nbase mounting: 875 x 590 x 320 mm 25 x 590 x 320 mm Nsize x 785 x 320 mm 25 x 785 x 320 mm Nsize 875 x 5 x 320 mm 25 x 5 x 320 mm Nsize x 445 x 320 mm 25 x 445 x 320 mm Nsize 3 oor and rear available with flat surface (Type 3/) or with profiled surface (Type 3/P anti poster). oors with profiled surface offer a labeling space on the top left corner. Supplied with open bottom for cable entry. To be mounted on a basement according to N standard dimensions between the fixation points. oth side panels are bolted to the roof and to the rear. The roof is bolted to the rear and the side panels. orizontal bottom profiles are connected onto the side panels, guaranteeing a structure with high resistance to torsional and bending forces, according to or easy cable entry the bottom profile can be easily removed by means of two sliding latches. The larger enclosures have two doors and two rear panels. The two rear panels are crosslinked with a middle beam. The left door has a doorpost, acting as a blocking profile to the right door. nclosure made of hot moulded, glass fibre reinforced polyester in RL 7035 light grey. orrosion resistant, UV stabilized for outdoor applications, suitable for use in environments from 35 to Temporary exceeding temperatures will not be harmful. labyrinth design guarantees natural ventilation whilst maintaining a good protection degree. The rainhood shape prevents water stagnation on the roof. This guarantees a protection degree P44 according to The cabinets offer maximum protection to user and equipment: protection degree K0 against external impacts according to N and Three point locking mechanism, operated by a swing handle designed to receive a half profile cylindric lock. The door opening angle exceeds 80. The open door can be manually unhinged to allow free access for maintenance. The hinges are made of glassfibre reinforced P, guaranteeing excellent corrosion resistance. Threaded inserts for bolts M8 can be mounted in the rear panel, allowing for direct mounting of busbars, a frame or a mounting plate for components. dditional fixation possibilities are foreseen in the side panel to mount horizontal busbars. Thus the usable width on the busbar is maximised. abinets can be coupled together side to side or double deep. or 3/P pedestals the profiled door and rear panels make poster sticking difficult and cause poster to drop off. Particularly designed for outdoor installation of fused switchgear, 4pole busbars, telecom jumper frames, etc..6 Specifications for tender documents

263 ndustrial nclosures Specifications for tender documents 3/ Pedestals with two separate compartments abinets for Nbase mounting: 875 x 785 x 320 mm N size 875 x 5 x 320 mm N size 2 oor and rear with flat surface. nternal separation in two compartments. The compartments are individually accessible and feature independant doors and locking systems. Supplied with open bottom for cable entry. To be mounted on a basement according to N standard dimensions between the fixation points. oth side panels are bolted to the roof and to the rear. The roof is bolted to the rear and the side panels. orizontal bottom profiles are bolted onto the side panels, guaranteeing a structure with high resistance to torsional and bending forces, according to nclosure made of hot moulded, glass fibre reinforced polyester in RL 7035 light grey. orrosion resistant, UV stabilized for outdoor applications, suitable for use in environments from 35 to Temporary exceeding temperatures will not be harmful. labyrinth design guarantees natural ventilation whilst maintaining a good protection degree. The rainhood shape prevents water stagnation on the roof. This guarantees a protection degree P44 according to The cabinets offer maximum protection to user and equipment: protection degree K0 against external impacts according to N and Three point locking mechanism on each door, operated by a recessed, integrated handle or a swing handle. The handles are designed to receive half profile cylindric locks. The open doors can be manually unhinged to allow free access for maintenance. The hinges are made of glassfibre reinforced P, guaranteeing excellent corrosion resistance. Threaded inserts for bolts M0 are molded in the rear panel, allowing for direct mounting of busbars, a frame or a mounting plate for components. Particularly designed for outdoor installation of power supply metering units in one comparment, and end user devices in the other compartment. 3/P Pedestals with increased depth abinets with greater depth for base mounting: 875 x 676 x 424 mm 25 x 87 x 676 mm 25 x 676 x 676 mm 875 x 200 x 424 mm 875 x 87 x 424 mm 25 x 200 x 676 mm Provided with 4 fixing points for floor or base mounting. oor and rear profiled surface (anti poster). The sides height 875 mm are profiled, whereas the sides height 25 mm are flat, allowing installation of outgoing power plugs or connectors. Supplied with open bottom for cable entry. oth side panels are bolted to the roof and to the rear. The roof is bolted to the rear and the side panels. orizontal bottom profiles are bolted onto the side panels, guaranteeing a structure with high resistance to torsional and bending forces, according to The larger enclosures have two doors and two rear panels. The two rear panels are crossliked with a middle beam. The left door has a doorpost, acting as a blocking profile to the right door. Possibility of pivoting door on side or back. nclosure made of hot moulded, glass fibre reinforced polyester in RL 7035 light grey. orrosion resistant, UV stabilized for outdoor applications, suitable for use in environments from 35 to Temporary exceeding temperatures will not be harmful. Rainhood made of hand lay up glass fibre reinforced polyester with RL 7035 topcoat. labyrinth design guarantees natural ventilation whilst maintaining a good protection degree. The rainhood shape prevents water stagnation on the roof. This guarantees a protection degree P43 according to The cabinets offer maximum protection to user and equipment: protection degree K0 against external impacts according to N and Three point locking mechanism, operated by a solid, industrial handle. The handle is designed to receive a half profile cylindric lock. The open door can be manually unhinged to allow free access for maintenance. The hinges are made of glassfibre reinforced P, guaranteeing excellent corrosion resistance. Particularly designed for all kind of outdoor industrial application, e.g. pump control or waste water treatment..62

264 ndustrial nclosures 4 olumn cabinets olumn cabinets type 4 with integrated base: 600 x 395 x 224 mm 600 x 495 x 224 mm 600 x 745 x 224 mm The base and the rear panel of the column are separate items, but are delivered assembled together nclosure made of hot moulded, glass fibre reinforced polyester in RL 7035 light grey. orrosion resistant, UV stabilized for outdoor applications, suitable for use in environments from 35 to +25. Temporary exceeding temperatures will not be harmful. labyrinth design guarantees natural ventilation whilst maintaining a good protection degree. The rainhood shape prevents water stagnation on the roof. This guarantees a protection degree P43 according to The pedestals guarantee Total nsulation The cabinets offer maximum protection to user and equipment: protection degree K0 against external impacts according to N and swing handle, suitable for operation by a half profile cylindric lock. oor opening angle of 80º is provided ixing holes for threaded inserts M6 are provided in the rear panel allowing direct mounting of busbars, a frame, a mounting plate or components. Particularly suitable for outdoor installation of fused switchgear, 4pole busbars, etc. 4S olumn cabinets olumn cabinets 4S with integrated base: 420 x 320 x 234 mm 850 x 320 x 234 mm The base and the rear panel of the column are moulded as one part. The base allows for stable installation of the column. nclosure made of hot moulded, glass fibre reinforced polyester in RL 7035 light grey. orrosion resistant, UV stabilized for outdoor applications, suitable for use in environments from 35 to +25. Temporary exceeding temperatures will not be harmful. labyrinth design guarantees natural ventilation whilst maintaining a good protection degree. The rainhood shape prevents water stagnation on the roof. This guarantees a protection degree P44 according to The cabinets offer maximum protection to user and equipment: protection degree K0 against external impacts according to N and ully integrated locking clamp, suitable for operation by a half profile cylindric lock. The cylindric lock can be fitted in a recessed lock box, protected by a vandal proof plastic cap. Once unlocked, the enclosure can be accessed without tools by removing the frontal liftoff segments completely (not hinged). The pedestals guarantee total insulation ixing holes for threaded inserts M6 are provided in the rear panel allowing direct mounting of busbars, a frame, a mounting plate or components. Particularly suitable for outdoor installation of fused switchgear,4pole busbars, etc. Specifications for tender documents.63

265 ndustrial nclosures Specifications for tender documents 6 Pedestals P44/54 abinets for base mounting: 830 x 470 x 320 mm N size x 590 x 320 mm N size x 785 x 320 mm N size Supplied with open bottom for cable entry. To be mounted on a basement according to N standard dimensions between the fixation points. oth side panels are bolted to the roof. The side panels are bolted to the rear. orizontal bottom profiles crosslink the side panels. nclosure made of hot moulded, glass fibre reinforced polyester in RL 7035 light grey. orrosion resistant, UV stabilized for outdoor applications, suitable for use in environments from 35 to Temporary exceeding temperatures will not be harmful. labyrinth design guarantees natural ventilation whilst maintaining a good protection degree. The rainhood shape prevents water stagnation on the roof. This guarantees a protection degree P44 according to The cabinets offer maximum protection to user and equipment: protection degree K0 against external impacts according to N and Three point locking mechanism, operated by a recessed, integrated handle or a swing handle. The handle is designed to receive a half profile cylindric lock. The open door can be manually unhinged to allow free access for maintenance. The hinges are made of nickled brass, guaranteeing excellent corrosion resistance. The door opening angle exceeds 80 ixation points for self tapping ilo screws 7,2 x 26 mm are moulded in the rear panel, allowing for direct mounting of busbars, a frame or a mounting plate for components. abinets can be coupled together side to side or double deep. Particularly designed as low cost solution for outdoor installation of fused switchgear, 4pole busbars, etc..64