Ripac Vario-Module System Enclosure

Transcription

1 Ripac Vario-Module System Enclosure The Riase instrument case impresses with its modern design and high functionality. Particular features include the numerous colour variants and the all-metal enclosure construction. The Ripac Vario-Module system enclosure (desktop the latest Ripac subrack range, making it ideal for individual configuration and assembly as a microcomputer system. t just one U, the RiBox system enclosure offers a high packaging density in even the smallest of spaces. or rack-mounted enclosure) is fully compatible with Page 6

2 Instrument ases / System Enclosures Instrument cases/ system enclosures RiBox System enclosure for horizontal installation of individual boards, hubs, routers and modems. Mounting plate of sheet steel for individual population. Mounting kit for horizontal installation of boards. Rittal Riase ll-metal instrument case for 48.6 (9 ) slide-in equipment The perfect safe for high-quality electronics. Extruded aluminium sections and die-cast elements form an extremely robust yet lightweight enclosure. Stability and non-slip properties are guaranteed by 0 high corner caps. The distance from the desktop or from the lower enclosure offers excellent ventilation conditions. Slide-in strips simply slide into the required profile channel, to facilitate any required attachment. Ripac Vario-Module System enclosure for direct installation of PBs or board-type plug-in units. Basic enclosure optionally for EM or non-em applications and suitable for individual configuration, e.g. with flanges/ cover plates. Optionally with corner trim for configuration as an instrument case or with 48.6 (9 ) flanges for configuration as a rack-mounted enclosure. Overview of benefits RiBox orizontal installation of selected system components Standard mounting plate Minimal build height of U Ripac Vario-Module Optional use as instrument case or rack-mounted enclosure Portable Optionally as EM version Rittal Riase Instrument case for the installation of 48.6 (9 ) slide-in equipment and components ll-metal design affords a high level of mechanical protection Ergonomic handle, feet and door variants For mobile and static use 3 colour variants as standard onfiguration as a Tower version Front doors made from aluminium or acrylic Stackable Page 6

3 Instrument ases / System Enclosures RiBox System Enclosures U E B B T Technical specifications: System enclosures U, 50, 00, 50, 300, 350 deep Easy to assemble with just 4 screws. Optionally for use as an instrument case or 9 rackmounted enclosure, front panel to hold an overlay to conceal the screws. Maximum possible useful interior space. Optional EM upgrades with additional EM gaskets. Option of installing VME or PI board horizontally. Design: System enclosure U, to IE Optionally available for 9 rackmounting in the enclosure or as an instrument case version. Equipped as an instrument case Equipped as a rack-mounted unit Material/surface finish: Side panels: untreated Base/cover trays: luminium, clear-chromated Front/rear panel: clear-chromated Mounting plate: Sheet steel ustom variations available upon request. Detail drawing, see page 9. U (E) Width (B) Width (B) 9 (48.6) 9 (48.6) 9 (48.6) 9 (48.6) 9 (48.6) 9 (48.6) 9 (48.6) Depth (T) Model No. RP instrument case Model No. RP rack case Model No. RP rack-mount including mounting kit for double Euroboards Supply includes Side panel Font panel Rear panel Base/cover tray Mounting kit ccessories EM set Mounting plate Page 63

4 Instrument ases / System Enclosures Ripac Vario-Module U Technical specifications: May be used as a rack-mounted enclosure or instrument case. External dimensions to IE for installation in 48.6 (9 ) racks. Installation dimensions for board type plug-in assemblies to IE Material/Surface finish: Side panels: spray-finished in RL 7035 orizontal rails: clear-chromated orner trims: Die-cast zinc, spray-finished in RL 7035 Side trims: spray-finished in RL 7035 Protection category: IP 40 for non-vented version. side panels, 4 horizontal rails, 4 threaded inserts, corner trims, assembly parts. Equipped as an instrument case Equipped as a rack-mounted unit orner trims, mounting flanges and top and bottom covers must be ordered separately. orizontal rails for further configuration must be ordered separately, see pages Detailed drawings, see page 9. orizontal rail configuration U ustom variations available upon request. Ripac Vario-Module U Page Installation width (P) Width (B) Width (B) Depth (T) Model No. VM Basic enclosure lso required Top covers Bottom covers Front corner trims for assembly as instrument case Flanges for configuration as rack-mount without handle holes ccessories Front/rear panels Rear adjustable feet Page 64

5 Instrument ases / System Enclosures Ripac Vario-Module U, EM E = U TE = P Technical specifications: May be used as a rack-mounted enclosure or instrument case. External dimensions to IE for installation in 48.6 (9 ) racks. Installation dimensions for board type plug-in assemblies to IE Material/Surface finish: Side panels: spray-finished in RL 7035 orizontal rails: clear-chromated orner trims: Die-cast zinc, spray-finished in RL 7035 Side trims: spray-finished in RL 7035 ontact points: conductive Protection category: IP 40 for non-vented version. side panels, 4 horizontal rails, 4 threaded inserts, rear corner trims, assembly parts. Equipped as an instrument case Equipped as a rack-mounted unit orner trims, mounting flanges and top and bottom covers must be ordered separately. orizontal rails for further configuration must be ordered separately, see pages Detailed drawings, see page 9. orizontal rail configuration U ustom variations available upon request. Ripac Vario-Module U Page Installation width (P) Width (B) Width (B) Depth (T) Model No. VM Basic enclosure EM lso required EM top covers EM bottom covers Front corner trims for assembly as instrument case Flanges for configuration as rack-mount without handle holes EM installation EM gaskets, horizontal for upper/lower horizontal rail between covers and horizontal rails EM gaskets, vertical Front/rear panels EM ccessories Front/rear panels Rear adjustable feet Page 65

6 T Instrument ases / System Enclosures Ripac Vario-Module 3U B E B TE E = U TE = P Technical specifications: May be used as a rack-mounted enclosure or instrument case. External dimensions to IE for installation in 48.6 (9 ) racks. Installation dimensions for board type plug-in assemblies to IE Material/Surface finish: Side panels: spray-finished in RL 7035 orizontal rails: clear-chromated orner trims: Die-cast zinc, spray-finished in RL 7035 Side trims: spray-finished in RL 7035 Protection category: IP 40 for non-vented version. side panels, 4 horizontal rails, 4 threaded inserts, corner trims, assembly parts. Equipped as an instrument case Equipped as a rack-mounted unit orner trims, mounting flanges and top and bottom covers must be ordered separately. orizontal rails for further configuration must be ordered separately, see pages Detailed drawings, see page 9. orizontal rail configuration 3U ustom variations available upon request. Ripac Vario-Module 3U Page Installation width (P) Width (B) Width (B) Depth (T) Model No. VM Basic enclosure lso required Top covers Bottom covers Front corner trims for assembly as instrument case Flanges for configuration as rack-mount without handle holes with handle holes ccessories Front/rear panels arrying handles Front handles ) crylic front door Rear adjustable feet ) Only in conjunction with mounting flanges with handle holes Page 66

7 T Instrument ases / System Enclosures Ripac Vario-Module 3U, EM B E B TE E = U Technical specifications: May be used as a rack-mounted enclosure or instrument case. External dimensions to IE for installation in 48.6 (9 ) racks. Installation dimensions for board type plug-in assemblies to IE Material/Surface finish: Side panels: spray-finished in RL 7035 orizontal rails: clear-chromated orner trims: Die-cast zinc, spray-finished in RL 7035 Side trims: spray-finished in RL 7035 ontact points: conductive Protection category: IP 40 for non-vented version. side panels, 4 horizontal rails, 4 threaded inserts, rear corner trims, assembly parts. Equipped as an instrument case Equipped as a rack-mounted unit orner trims, mounting flanges and top and bottom covers must be ordered separately. orizontal rails for further configuration must be ordered separately, see pages Detailed drawings, see page 9. orizontal rail configuration 3U ustom variations available upon request. Ripac Vario-Module 3U Page Installation width (P) Width (B) Width (B) Depth (T) Model No. VM Basic enclosure EM lso required EM top covers EM bottom covers Front corner trims for assembly as instrument case Flanges for configuration as rack-mount without handle holes with handle holes EM installation EM gaskets, horizontal for upper/lower horizontal rail between covers and horizontal rails EM gaskets, vertical Front/rear panels EM ccessories Front/rear panels arrying handles Front handles ) crylic front door Rear adjustable feet ) Only in conjunction with mounting flanges with handle holes Page 67

8 Instrument ases / System Enclosures Ripac Vario-Module 4U, 6U, 7U Technical specifications: May be used as a rack-mounted enclosure or instrument case. External dimensions to IE for installation in 48.6 (9 ) racks. Installation dimensions for board type plug-in assemblies to IE Material/surface finish: Side panels: spray-finished in RL 7035 orizontal rails: clear-chromated orner trims: Die-cast zinc, spray-finished in RL 7035 Protection category: IP 40 for non-vented version. side panels, 4 horizontal rails, 4 threaded inserts, rear corner trims, side trims centre, assembly parts. Equipped as an instrument case Equipped as a rack-mounted unit orner trims, mounting flanges and top and bottom covers must be ordered separately. orizontal rails for further configuration must be ordered separately, see pages Detailed ustom drawings, variations available see page upon 9. request. orizontal rail configuration 6U 4U (3 + ) D ustom variations available upon request. D 7U (6 + ) Ripac Vario-Module 4U (3 + ) 6U 7U (6 + ) Page Installation width (P) Width (B) Width (B) Depth (T) Model No. VM Basic enclosure lso required Top covers Bottom covers Front corner trims for assembly as instrument case Flanges for configuration as rack-mount without handle holes with handle holes ccessories Front/rear panel see page arrying handles Front handles ) crylic front door Rear adjustable feet ) Only in conjunction with mounting flanges with handle holes Page 68

9 Instrument ases / System Enclosures Ripac Vario-Module 4U, 6U, 7U, EM Technical specifications: May be used as a rack-mounted enclosure or instrument case. External dimensions to IE for installation in 48.6 (9 ) racks. Installation dimensions for board type plug-in assemblies to IE Material/surface finish: Side panels: spray-finished in RL 7035 orizontal rails: clear-chromated orner trims: Die-cast zinc, spray-finished in RL 7035 ontact points: conductive Protection category: IP 40 for non-vented version. side panels, 4 horizontal rails, 4 threaded inserts, rear corner trims, side trims centre, assembly parts. orner trims, mounting flanges and top and bottom covers must be ordered separately. Detailed drawings, see page ustom 9. variations available upon request. ustom variations available upon request. Equipped as an instrument case Equipped as a rack-mounted unit orizontal rails for further configuration must be ordered separately, see pages U (3 + ) orizontal rail configuration 6U D D 7U (6 + ) Ripac Vario-Module 4U (3 + ) 6U 7U (6 + ) Page Installation width (P) Width (B) Width (B) Depth (T) Model No. VM Basic enclosure EM lso required EM top covers EM bottom covers Front corner trims for assembly as instrument case Flanges for configuration as rack-mount without handle holes with handle holes EM installation EM gaskets, horizontal for upper/lower horizontal rail between covers and horizontal rails EM gaskets, vertical Front/rear panels EM ccessories Front/rear panel arrying handles Front handles ) crylic front door Rear adjustable feet ) Only in conjunction with mounting flanges with handle holes Page 69

10 Instrument ases / System Enclosures Ripac Vario-Module ccessories Enclosure population For individual interior installation of the encl osures, system components from the Ripac range may be used. Top overs for Ripac Vario module Standard version Sheet steel, spray-finished olour: RL 7035 EM version Sheet steel, spray-finished ontact points: conductive P Depth Model No. VM standard with vent holes without vent holes with vent holes Model No. VM EM without vent holes ustom variations available upon request. Bottom overs for Ripac Vario module Standard version Sheet steel, spray-finished olour: RL 7035 P Depth Model No. VM standard with vent holes ustom variations available upon request. EM version Sheet steel, spray-finished ontact points: onductive without vent holes with vent holes Model No. VM EM without vent holes Feet with fold-out support stand. Load capacity up to 0 kg. Plastic olour: RL 7035 Model No. VM Mounting plate For mounting heavy components. luminium ssembly parts. P Depth Model No. VM Page 70

11 Instrument ases / System Enclosures Ripac Vario-Module ccessories Front Flanges Required when the Ripac Vario-Module is to be used as a rack-mounted enclosure. The flanges have a channel to accoodate vertical EM gaskets. luminium, clear-chromated U without handle hole Model No. VM with handle hole ccessories: Vertical EM gasket, see Front page handles 4. for mounting on front flanges, Front handles for mounting on front corner trim, see page 7. Front corner trims Required when the Ripac Vario-Module is to be used as a desk-top instrument case. The corner trims have a channel to accoodate vertical EM gaskets. luminium, spray-finished olour: RL 7035 U Model No. VM and 8U available on request. ccessories: Vertical EM gasket, see Front page handles 4. for mounting on front corner trim Front handles for mounting on front corner trim, see page 7. Front handles For mounting on front corner trims Maximum load capacity: 500 N over: BS andle part: luminium, clear anodised handle parts, 4 covers, assembly parts. U Model No. VM ccessories: arrying handles For ergonomic transportation, even with stacked enclosures. May also be used as a support stand. Max. load capacity: 350 N. Die-cast zinc and extruded aluminium section olour: RL 7035 Only for use with front and rear trims. For enclosure depth Model No. VM ccessories: Page 7

12 Instrument ases / System Enclosures Ripac Vario-Module ccessories Rear Front feet For mounting on the rear of the enclosure. Dual function: Mechanical protection of the connection components. lso act as a cable tidy during transportation. P, self-extinguishing to UL 94-V0 olour: RL 7035 Model No. VM Earthing set For connecting the top and bottom covers to the side panels with PE conductors. onductor cable green/yellow,.5, with washer, flat-pin connector and assembly parts. Model No. RP Support stand/carrying handle To fit Ripac Vario-Module 3U, 4 U and 6 U, adjustable on a 30 pitch pattern. Extruded aluminium section/die-cast olour: RL 7035 ssembly parts. orner trim for support stands/carrying handles should be ordered separately. For Ripac Vario-Module Model No. VM 4 P P P orner trim for support stand Model No. VM 3 U U U Front doors of acrylic glazing, horizontally hinged For protection of built-in control components. Side parts: luminium, spray-finished in RL 7035 Window: Smoked acrylic ssembly parts. U For Ripac Vario-Module Model No. VM 3 4 P P P P P P Front panels/rear panels To cover the enclosures front and rear. lso available as a hinged or EM version. Model No. see page 53. Page 7

13 T Instrument ases / System Enclosures Riase 69. (/ 9 ) (E) E = U Technical specifications: Depth: 300, 40, 540 Installation width: 69. ( / 9 ) Installation options: 69. ( / 9 ) slide-in equipment to IE Material/surface finish: overs: Extruded aluminium section/ die-cast, spray-finished Side panels: spray-finished orner caps: Plastic 48.6 (9 ) mounting bracket: clear-chromated Enclosures for subrack width 69. ( / 9 ) olour: RL 7035 (pale grey) Decorative colours and corner caps: RL 508 (turquoise) RL 50 (pale blue) RL 7030 (stone grey) Protection category: IP 4 for unvented version. Packs of side panels, covers, 8 corner caps, 8//6 cover caps (300/40/540 depth), (9 ) mounting brackets, 4 threaded inserts, plain inserts, rear panel. Enclosures are supplied partially assembled. U U 3U 4 U Page eight () (U) Depth (T) Unvented Model No. R, RL Model No. R, RL 50 ) Model No. R, RL 7030 ) Vented Model No. R, RL Model No. R, RL 50 ) Model No. R, RL 7030 ) Weight (kg) vented/ unvented ccessories arrying handles, horizontal RL Support stand/ carrying handle RL 50 ) RL 7030 ) Blanking plates (rear panel) Special sizes and colours available on request. Property rights: German registered design no UK reg. design no US design patents Des. 40,640 and Des. 43,464 Japan. reg. designs no and Detailed drawings, see page Front door, vertically hinged Slide rails Mounting angles 48.6 (9 ) Threaded inserts with M4 thread End section ) Extended delivery times Page 73

14 T Instrument ases / System Enclosures Riase 48.6 (9 ) (E) 56 E = U Page 74 Technical specifications: Depth: 300, 40, 540 Installation width: 48.6 (9 ) Installation options: 48.6 (9 ) slide-in equipment to IE Material/surface finish: overs: Extruded aluminium section/ die-cast, spray-finished Side panels: spray-finished orner caps: Plastic 48.6 (9 ) mounting bracket: clear-chromated Enclosure for subrack width 48.6 (9 ) Packs of olour: RL 7035 (pale grey) Decorative colours and corner caps: RL 508 (turquoise) RL 50 (pale blue) RL 7030 (stone grey) Protection category: IP 4 for unvented version. side panels, covers, 8 corner caps, 8//6 cover caps (300/40/540 depth), 48.6 (9 ) mounting brackets, threaded inserts, plain inserts. Enclosures are supplied partially assembled. For rear installation, order back panel/door separately. Special sizes and colours available on request. Detailed drawings, see page 93. 3U 4U 6U 7U 9U U Page eight () (U) Depth (T) Not vented Model No. R, RL Model No. R, RL 50 ) Model No. R, RL 7030 ) Vented Model No. R, RL Model No. R, RL 50 ) Model No. R, RL 7030 ) Weight (kg) vented/ unvented ccessories arrying handles, horizontal Support RL stand/ carrying RL 50 ) handle RL 7030 ) Back panel, screw-fastened Rear door, vertically hinged Rear door for fan installation Front door, vertically hinged Slide rails Mounting angles 48.6 (9 ) Threaded inserts with M4 thread End section ) Extended delivery times.

15 Instrument ases / System Enclosures Riase accessories Mounting angles 48.6 (9 ) For front/rear installation of subracks and blanking plates. clear-chromated ssembly parts. pack of threaded inserts and packs of mounting rails and spacers are required for depth-adjustable installation. For enclosure height Model No. R U U U U U U U U lso required: Threaded inserts, see page 75. Mounting rails, see page 75. Spacers, see page 75. Threaded inserts with M4 thread for Riase For the installation of mounting angles, slide rails, mounting kits, cable ducts etc. Simply slide into the channels in the side panels. clear-chromated For enclosure height Model No. R U U U U U U U U Mounting rails For depth-variable installation of mounting angles For the installation of component shelves, static or pull-out luminium, clear-chromated ssembly parts. B Version for depth-variable mounting angles omponent shelf installation for 48.6 (9 ) (width 409, also with telescopic slides) Direct component shelf installation (width 47 ) For enclosure depth lso required: Threaded inserts, see page 75. Spacers, see page 75. ccessories: omponent shelf omponent shelf, 48.6 (9 ) Model No. R B 3 4 Threaded inserts Short spacers Long spacers Mounting rails Spacers For the attachment of mounting rails. Design Model No. R Short for depth-variable mounting bracket Long for component shelf installation (width 409 ) Page 75

16 Instrument ases / System Enclosures Riase accessories Side rails To support heavy installed equipment..5 sheet steel, passivated ssembly parts. For enclosure depth Model No. R lso required: Threaded inserts, see page 75. Earthing set for Riase for Riase To meet electrical protective measures; fits all Riase enclosures. Threaded insert, screw, green/yellow connection cable, serrated washer, nut. Model No. V Rear trim To cover the sides to the left and right of the subrack when no rear door or rear panel is used. spray-finished olour: RL 7035 ssembly parts. For enclosure height Model No. R 3 U U U U U U arrying handles horizontal For easy, secure transportation. May be retrofitted Load capacity 30 kg/pair Side parts: Die-cast, spray-finished entre part: spray-finished olour: RL 7035 ssembly parts. For enclosure depth Model No. R Page 76

17 Instrument ases / System Enclosures Riase accessories 3 Support stand/carrying handle Support stand/carrying handle adjustable in 30 increments Suitable for retrofitting to 7 U For 69. ( / 9 ) and 48.6 (9 ) wide enclosures Load capacity 30 kg inged part: Die-cast, spray-finished entre part: spray-finished with plastic cover olour: RL 7035 Decorative colours: RL 7030 (stone grey) RL 508 (turquoise) 3 RL 50 (pale blue) ssembly parts. For enclosure width Decorative colour RL W Model No. R 69. ( / 9 ) ( / 9 ) 50 ) ( / 9 ) 7030 ) (9 ) (9 ) 50 ) (9 ) 7030 ) W = Overall width of handle ) Extended delivery times. Keyboard lid Suitable for the installation of 48.6 (9 ) keyboards. orizontally hinged with security lock Removable cover plate Frame section: Extruded aluminium section/ die-cast, spray-finished Base and cover plate: luminium, spray-finished olour: RL 7035 ssembly parts. For enclosure width (U) Packs of Model No. R 48.6 (9 ) (9 ) Use only in conjunction with support stand/ carrying handle Front door vertically hinged For mechanical protection of built-in control components. Optionally hinged on the right or left With security lock Frame section: spray-finished orner pieces: Die-cast aluminium, spray-finished Glazed pane: Light grey acrylic olour: RL 7035 ssembly parts. For enclosure width W (B) (U) Model No. R 69, ( / 9 ) , ( / 9 ) (9 ) (9 ) (9 ) (9 ) B Page 77

18 Instrument ases / System Enclosures Riase accessories luminium front door vertically hinged For mechanical protection of built-in control components. Optionally hinged on the right or left With security lock Frame section: spray-finished orner pieces: Die-cast al uminium, spray-finished luminium plate olour: RL 7035 ssembly parts. For enclosure width W (B) (U) Model No. R 48.6 (9 ) (9 ) (9 ) Front door for tower enclosure For mechanical protection of built-in control components. Optionally hinged on the right or left With security lock Frame section: spray-finished orner pieces: Die-cast aluminium, spray-finished Glazed pane: Light grey acrylic olour: RL 7035 ssembly parts. For enclosure width W (U) Model No. R 48.6 (9 ) (9 ) W = Overall width of front door Page 78

19 Instrument ases / System Enclosures Riase accessories 3 Tower feet For vertical siting of enclosures. May be retrofitted. Plastic to UL 94-V0, self-extinguishing Decorative colours: 3 RL 7030 (stone grey) RL 508 (turquoise) RL 50 (pale blue) 4 tower feet, assembly parts. Decorative colour RL Model No. R 508 set set set Back panel screw-fastened To close off the rear. /3 aluminium, natural anodised Two 48.6 (9 ) mounting brackets, assembly parts Y Y For enclosure width (U) Model No. R 48.6 (9 ) (9 ) (9 ) (9 ) (9 ) (9 ) ustom variations available upon request Rear door vertically hinged To close off the rear. inged, with security lock Optionally hinged on the left or right luminium, spray-finished olour: RL 7035 ssembly parts..5 For enclosure width (U) Model No. R 48.6 (9 ) (9 ) (9 ) (9 ) ustom variations available upon request i.l. = 474 i.l. = learance width.5 Page 79

20 Instrument ases / System Enclosures Riase accessories E Rear door for fan installation To close off the rear. With security lock Optionally hinged on the left or right For the installation of 0 fans luminium, spray-fin olour: RL 7035 ssembly parts. ished For enclosure width ccessories: Fan expansion kit, (U) Model No. R 48.6 (9 ) (9 ) (9 ) (9 ) ustom variations available upon request..5 E = U Blanking plate For the installation in electronic enclosures or housings. luminium, natural-anodised U 69. ( / 9 ) Model No. V 48.6 (9 ) Blanking plate horizontally hinged For the installation in electronic enclosures or housings. 3 aluminium, natural-anodised inge: Die-cast zinc, zinc-plated ssembly parts. Width U 48.6 (9 ) (9 ) 6 Model No. EL Blanking plate vertically hinges For the installation in electronic enclosures or housings. 3 aluminium, natural-anodised inge: Die-cast zinc, zinc-plated ssembly parts. Width U 48.6 (9 ) (9 ) 6 Model No. EL inge for blanking plates Die-cast zinc, zinc-plated ssembly parts. Model No. EL ssembly screws M6 x 5 For electronic equipment, 48.6 (9 ) installed components and blanking plates. Plastic washers. Design heese-head screw M6 00 Phillips-head screw M6M 00 Model No. EL Page 80

21 Instrument ases / System Enclosures Riase accessories aptive nuts M6 For the attachment of rack-mounted electronic equipment, 48,6 (9 ) installed equipment and blanking plates to mounting angles, 48,6 (9 ). For use with metal thickness from In areas of narrow tolerance, captive nuts for metal thicknesses of..5 should be used. Optionally with or without contact of the installed equipment to the 48.6 (9 ) section/ enclosure. Design For metal thicknesses Packs of With contact Without contact With contact Without contact Model No. EL Page 8