Rittal console systems...

Transcription

1 Rittal console systems multi-variable Universal console Optionally with short or tall door. Short door offers free field for mounting desk section (see photograph) or keyboard drawer. High level of stability and high protection category because the body is more or less manufactured from a single piece. One-piece mounting plate across the entire height, with C fold at the side, depth-adjustable on a 25 mm pitch pattern. Universal interior installation with partial mounting plates, component shelves, punched sections and rails thanks to round and square holes on a 25 mm pitch pattern. Rear door across the entire height for uninhibited access from the rear. Console system Multi-variable in combination. Each component may be installed in isolation or integrated into the machine or plant. Pedestals, with mounting plate, in two depths, also suitable for use as consoles. Desk units in two depths with perforated strips in the base and cover for easy installation. Consoles, with mounting plate, in three depths and two heights for virtually any installation situation. Instead of the consoles, compact enclosures AK (see Catalogue 30, page 84) may also be combined with the console system. German patent no European patent no with validity for DE, ES, FR, GB, IT US patent no. 4,843,519 One-piece console Variable installation depth in the cover section, and cable entry from the rear via a mounting plate height-offset by 2x40 mm. Cover including perforated strips for cable routing. Safety lid stay may be unlatched with two-handed operation. Door hinge may be swapped from right to left by simply unscrewing the hinges. UL CSA TÜV Germanischer Lloyd Russian Maritime Register of Shipping Lloyds Register of Shipping VDE Norske Veritas Bureau Veritas 178 Systems for the human/machine interface

2 Console systems Console systems AP Combination options Console systems AP Modules Console systems AP Technical details One-piece consoles AP, sheet steel Universal consoles AP, sheet steel One-piece consoles AP, stainless steel Universal consoles AP, stainless steel Function and variability are key features of all Rittal console systems. Perfect designs for added benefits in terms of assembly, security and operation. The performance capability of a machine or plant is decided at the console and operating unit. Only optimum packaging of today s sensitive controls combined with optimum ergonomic conditions for operating staff can create the pre-requisites for cost-effective plant operation. Console systems 179

3 The elements of the AP console system in depths 400 mm (blue) and 0 mm (green) may be combined in numerous user-specific variants, as shown in the diagram. The table opposite allows you to find the order number for your selection immediately. Integrated into the stylish, tailor-made Command Panel systems VIP 6000, Optipanel and Compact Panel (yellow), this produces a wide range of modern extension options for the CP classic AP console systems. VIP 6000, see page Optipanel, see page Compact-Panel, see page Support arm systems, see page Specify the dimensions for positioning on the trim plate and the Model No. of the enclosure attachment. A2 A1 A6 B7 1)2) A5 A6 B1 1) A6 A4 A2 B4 A2 A4 A4 CP A2 A5 A1 CP A2 A5 A1 A3 A3 CP B4 B1 B7 CP 1) 1)2) 1) 1)2) B4 B1 B7 B3 B3 CP A2 CP 1) May also be configured with the door at the rear (see diagram opposite) 2) When assembling, additional holes on the desk unit are required A1 B1 1) A8 A9 B8 B9 180 Systems for the human/machine interface

4 Console systems AP Combination options for the modules B4 A6 B3 A5 A4 Examples of configuration with doors to the rear A3 A2 For further information, see page Technical details, see page D = 0 mm Height mm D = 400 mm Width Width B7 A6 630 with deep rear door Console systems A5 430 with deep rear door 430 A4 B4 A3 200 B3 A A1 B1 A9 200 B9 A8 100 B8 Systems for the human/machine interface 181

5 Multi-variable The components of the AP console system can be combined in many user-specific variants. Modern flat screens and operator panels can also be used. Integrated into the stylish Command Panel systems VIP 6000, Optipanel and Compact Panel, this produces a wide range of modern extension options for the classic AP console systems. Combination options see page IP 55 to EN /10.91 Complies with NEMA 12 (provided the appropriate parts are combined). Technical details see page Trim panel To finish off pedestals, desk units or consoles. Sheet steel, spray finished, 1.5 mm / / /495 Width mm 800 To fit Depth mm Colour RAL B Consoles Enclosure open at bottom Door(s) hinged at bottom with retaining cords at the front. For depth 0 mm: with door(s) at rear Mounting plate. For depth 0 mm: adjustable on a 25 mm pitch pattern Sheet steel 1.5 mm 2.0 mm RAL 7032 Dipcoat primed RAL 7044, Powder-coated on the outside in textured RAL mm Zinc-plated Width in mm P. of Height in mm Depth in mm with deep rear door 1 p. Number of lids Weight (kg) Standard double-bit lock insert may be exchanged for 47 mm lock inserts, type D, see page 242 Other accessories from page 196 or via index. 182 Systems for the human/machine interface

6 Console systems AP Desk units Enclosure open top and bottom Console lid with cam and lid stay Sheet steel 1.5 mm 2.0 mm RAL 7032 Dipcoat primed RAL 7044, Powder-coated on the outside in textured RAL 7032 Width in mm P. of Page Height in mm 200 Depth in mm 8 (for depth 400) 9 (for depth 0) 1 Weight (kg) Aluminium strips AP Standard double-bit lock insert may be exchanged for 47 mm lock inserts, type D, see page 242 Other accessories from page 196 or via index. Pedestals Enclosure open at top Door or double door with locking rod. For depth 400 mm: front For depth 0 mm: front and rear Gland plates, two-piece Mounting plate. For depth 0 mm: Infinitely adjustable. Sheet steel 1.5 mm 2.0 mm 1.5 mm 3.0 mm RAL 7032 Dipcoat primed RAL 7044, Powder-coated on the outside in textured RAL 7032 Zinc-plated Console systems Width in mm P. of Page Height in mm 670 Depth in mm Doors Weight (kg) Base/plinth SO Height 100 mm Height 200 mm Cross-member, adjustable AP Cable clamp rails Swing frame SR 11 U * * Cat. 30, 1021 Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, 700, see page 242 and Ergoform-S lock system see page 241 * Two swing frames may be installed. Other accessories from page 196 or via index. Systems for the human/machine interface 183

7 Pedestals / / / / /10 AP / AP AP / AP / AP / AP Ø Ø (10) (795) 597 (797) AP AP / AP Ø Ø (797) (795) (10) (795) 597 (797) AP AP / AP Systems for the human/machine interface

8 Console systems AP Technical details i.l i. L AP / AP / AP AP / AP / AP i.l. = Clearance width Console systems /1115/ /1102/ Systems for the human/machine interface 185

9 Pedestals Side view 800/0/ /1040/ /1100/10 660/1060/ X View in X direction i.l. 742/1142/ AP / AP / AP i.l. = Clearance width /1197/1597 Side view /0/ /1040/ /1100/10 660/1060/ X View in X direction i.l. 742/1142/ AP / AP / AP /1197/ Systems for the human/machine interface

10 Consoles Console systems AP Technical details View in Y direction /0/ /1197/ /1142/ T3 T2 X Y T3 T2 X Y T1 T AP / AP / AP AP / AP / AP View in X direction 797/1197/ /1133/ Depth 400 Depth 0 T1 = vertically hinged 3 U 300 T2 = vertically hinged 6 U 195 T3 = vertically hinged, max. 110 T1 = static, max / / Z X Y Z X Y 4.5/ /548 View in Z direction 797/1197/ /1132/ = = Console systems AP / AP / AP AP / AP / AP t = / /1115/ /1127/1527 Systems for the human/machine interface 187

11 480 B3 B B B (87) (127) B6 B B4 370 B4 B1 400 B B F F1 Enclosure, solid rear and sides, door or double door at front, Console lid with lid stay, Two-piece gland plate, Mounting plate. Width (B1) in mm P. of Page Height in mm 960 Depth in mm 400 /480 1 = Width B3 = Clearance width, top B4 = Clearance width, front B5 = Clearance width, bottom B6 = Width of door, left B7 = Width of door, right B8 = Punched length F1 = Mounting plate width F2 = Distance between mounting holes Doors Weight (kg) Base/plinth SO Height 100 mm Height 200 mm Cross member, adjustable AP Aluminium strips AP * Cable clamp rails PS Swing frame SR, 11 U Cat. 30, 1021 * should be shortened by 200 mm. 188 Systems for the human/machine interface

12 One-piece consoles AP Sheet steel Console systems see page or via index. Sheet steel Enclosure: 1.5 mm Door and console lid: 2.0 mm Mounting plate: 3.0 mm Enclosure, door and console lid: Dipcoat-primed in RAL 7044 and powder-coated on the outside in textured RAL 7032 Mounting plate and gland plates: Zinc-plated IP 55 to EN /10.91 Complies with NEMA 12 Standard double-bit lock insert may be exchanged for 47 mm lock inserts, type D, see page 242. Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, see page 242 and Ergoform-S lock system, see page 241. Combination of one-piece console with Optipanel. Systems for the human/machine interface 189

13 i. L i. L i. L i. L i. L i. L i. L i. L Enclosure Sheet steel 1.5 mm Dipcoat primed in RAL 7044 Doors* top, bottom, rear 2.0 mm Powder coated in textured RAL 7032 on the outside Mounting plate 3.0 mm Zinc-plated Three-piece gland plates 1.5 mm Zinc-plated AP , 2 design strips Aluminium section RAL 18 Protection category IP 55 to EN 60,529 / 10.91, complies with NEMA 12 * With short bottom door (AP ) the drawer or desk section (see page 227) should be fitted in order to preserve the protection category. W x H x D 600 x 1300 x 0 mm Weight (kg) Page Short bottom door 77.0 Tall bottom door 75.8 Base/plinth 100 mm high SO mm high SO Cross member, adjustable AP Cable clamp rail PS hinges PS Cable entry plates PS Top door with studs left and right for installing vertical perforated mounting strips SZ and horizontal support strips SZ to be mounted on top (see Cat. 30, page 9). In terms of interior installation, AP universal consoles are similar to free-standing enclosure ES 00 in other words, many accessory components (PS Model No.) will fit. Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, see page 242 and Ergoform-S lock system, see page Systems for the human/machine interface

14 Universal console AP Sheet steel Console systems see page or via index. Plenty of space for tower PCs, printers and paper. Model No. see page 263. For installing display and control components, keyboards etc. Model No. see page 227. for mouse and keyboard with a maximum width of 0 mm. Model No. see page 227. Systems for the human/machine interface 191

15 480 B3 B B5 1.5 B6 B B5 B (87) (127) B4 B1 1.5 B M6 x B F2 F1 Enclosure, solid rear and sides, door or double door at front, with locking rod, Console lid with lid stay and stainless steel cam latched in the enclosure, Two-piece gland plate, Mounting plate, zinc-plated, passivated. Width (B1) in mm P. of Page Height in mm Depth in mm 400/ / / /480 1 = Width B3 = Clearance width, top B4 = Clearance width, front B5 = Clearance width, bottom B6 = Width of door, left B7 = Width of door, right B8 = Punched length F1 = Mounting plate width F2 = Distance between mounting holes Doors Weight (kg) Height 100 mm Base/plinth SO Height 200 mm Standard double-bit lock insert of locking rod may be exchanged for 27 mm lock inserts, type A, see page 242 and Ergoform-S lock system, see page Systems for the human/machine interface

16 One-piece consoles AP Stainless steel Console systems see page or via index. Stainless steel Enclosure: 1.5 mm Door or double door and console lid: 2.0 mm Mounting plate: 3.0 mm sheet steel Enclosure, door and console lid: Brushed, grain Mounting plate: Zinc-plated IP 55 to EN /10.91 Complies with NEMA 12. for base/plinth to compensate for floor irregularities. Model No. see page 210. Model No. see page 262. mounted on the rear panel for an additional operating housing. Model No. see page 95. Systems for the human/machine interface 193

17 i. L i. L i. L i. L i. L i. L i. L i. L Enclosure, solid top and sides, Rear door, Three-piece gland plates, Mounting plate. Three-piece front: Top door inclined by 11, r/h hinge. Empty space for Desk section AP Keyboard drawer AP Bottom door, r/h hinge. Two-piece front: Top door inclined by 11, r/h hinge. Bottom door, r/h hinge. P. of Universal console Page with short front door with tall front door Width in mm Height in mm Depth in mm Weight (kg) Desk section AP or Keyboard drawer AP Base/plinth SO Height 100 mm Height 200 mm Base/plinth trim, modular SO Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, 700, see page 242 and Ergoform-S lock system, see page Systems for the human/machine interface

18 Universal consoles AP Stainless steel Console systems see page or via index. Stainless steel Enclosure: 1.5 mm Door: 2.0 mm Mounting plate: Sheet steel 3.0 mm, zinc-plated Brushed, grain 240 IP 56 to EN /10.91 Complies with NEMA 12. for 3 cables up to Ø 6 mm. Model No. SZ , see page 216. Model No. see Innovations 2003, page 28. For desk section, mouse and mousepad IP 67. Model No. see page 262. Systems for the human/machine interface 195