Product Diversity Knowledge Transfer MPS Expertise Globalization Integrative Thinking Product Information System Enclosure Ripac Vario-Module

Transcription

1 Product Diversity Knowledge Transfer MPS Expertise Globalization Integrative Thinking Product Information System Enclosure Ripac Vario-Module May be used as an instrument case or rack-mounted enclosure Basic EM protection, thanks to all-metal enclosure EM-upgradable Portable 237

2 In Detail: System Enclosure Ripac Vario-Module The ideal enclosure solution for variable applications. The Ripac Vario-Module system enclosure can be used either as an or rack-mounted enclosure, due to the installation of corner trims or mm (19") flanges in the front section, which allow it to be adapted to suit existing applications. Design Features Front orner Trim Piece for configuration as an. Front Flanges for configuration as a rack-mounted enclosure. Variable Interior Installation with system components from the Ripac subrack range. Basic EM Protection due to the all-metal enclosure with conductive contact points. EM Expansion Flanges and corner trim panels prepared for the installation of EM gaskets. PE onductor Set for connecting the cover plates/ gland plates to the side panels with Protective Earth conductors. Support Stand/arrying Handle to fit all 3, 4 and 6U enclosures. djustable on a 30 angle. Rear djustable Feet may be retro-fitted. They provide mechanical protection for the connection elements and allow power cables to be wound up during transportation. Front Handles for mounting on the flanges (with mounting holes). Microcomputer Packaging System with a backplane and power supply unit, the Ripac Vario-Module is easily upgraded to a complete MPS system. Keyboard Lid 4U, 84HP for retrospective, front mounting on 4U high, 84HP wide enclosures. Prepared to accommodate mechanical or membrane keyboards. crylic Front Doors horizontally hinged to protect the installed control components. 236

3 Order Information Ripac Vario-Module 2U, 3U/42 HP, 63HP Rail Ripac Vario-Module Packs 2U 3U Page type of Installation width (HP) Depth (mm) Enclosure Order No. VM without vent holes Enclosure Order No. VM with vent holes e B B Expansion ccessories/individual Parts orner trim pieces for assembly as Mounting flanges for assembly as rack-mounted unit without handle holes with handle holes Front horizontal rails (not suitable for depth-adjustable installation) B Front horizontal rails, with 10 mm extension for injector/extractor handles (not suitable for depth-adjustable installation) 1 Rear horizontal rails F Z rail DIN G Insulating strips (21HP) H onductive strips (84HP) I Threaded inserts EM Expansion K EM gaskets, horizontal top/bottom cover to horizontal rail EM gaskets, vertical Front/rear panel, EM see pages Other ccessories Front/rear panels see pages arrying handles Front handles* crylic front door Rear adjustable feet *Only in conjunction with mounting flanges with handle holes 2U Section B-B 3U T e x 10 = f T e x 10 = f B1 TE B2 3 HE HE B1 TE B2 T = Depth HE = U TE = HP 238

4 Order Information Ripac Vario-Module 2U, 3U/42 HP, 63HP n Technical Specifications: May be used as a rack mounted unit or External dimensions to DIN , part 1 for installation in enclosures, mm (19") Installation dimensions for board type plug-in units to DIN , part 5 and DIN IE and IEEE / Protection ategory: IP 40 for non-vented version 2 side panels 1 top cover with/without vent holes 1 bottom cover with/ without vent holes 4 horizontal rails 4 threaded inserts 2 rear corner trim pieces for EM gaskets ssembly parts Ripac Vario-Module ccessories: See page Horizontal Rails: From page 173 olor: RL 7035 RL 5018 Horizontal Rails onfiguration Material/Surface Finish: Side panels: finished in RL 7035 Horizontal rails: finished in RL 7035 orner trim: Die-cast zinc, spray finished in RL 7035 overs: Sheet steel, spray finished in RL 7035 Side trim: finished in RL 7035 ontact paints: onductive orner Trim Pieces With channel to hold EM gaskets Order No. see page ) Equipped s n Instrument ase: Front corner trim must be 2) Equipped s Rack-Mounted Unit: Mounting flanges must be Included in the supply To be ordered separately, depending on application 239

5 Order Information Ripac Vario-Module 1U, 2U, 3U/84HP Rail Ripac Vario-Module Packs 1U 2U 3U Page type of Installation width (HP) Depth (mm) Enclosure Order No. VM without vent holes Enclosure Order No. VM with vent holes e B B Expansion ccessories/individual Parts Top cover, non vented Top cover, vented Bottom cover, non vented Bottom cover, vented orner trim pieces for assembly as Mounting flanges for assembly as rack-mounted unit without handle holes with handle holes Front horizontal rails (not suitable for depth-adjustable installation) B Front horizontal rails with 10 mm extension for injector/extractor handles (not suitable for depth-adjustable installation) 1 Rear horizontal rails F Z rail DIN G Insulating strips (21HP) H onductive strips (84HP) I Threaded inserts EM Expansion K EM gaskets, horizontal for top/bottom cover to horizontal rail EM gaskets, vertical Front/rear panel, EM See pages Other ccessories Front/rear panels See pages arrying handles Front handles* crylic front door Rear adjustable feet *Only in conjunction with mounting flanges with handle holes 1U 2U 3U T T e x 10 = f 35.1 T e x 10 = f 78.1 e x 10 = f 1 HE B1 TE B HE B1 TE B HE B1 TE B T = Depth HE = U TE = HP 240

6 Order Information Ripac Vario-Module 1U, 2U, 3U/84HP n Technical Specifications: May be used as a rack mounted unit or External dimensions to DIN , part 1 for installation in enclosures, 482.6mm (19") Installation dimensions for board type plug-in units to DIN , part 5 and DIN IE and IEEE / side panels 1 top cover with/without vent holes 1 bottom cover with/without vent holes 4 horizontal rails 4 threaded inserts 2 rear corner trim pieces for EM gaskets ssembly parts Ripac Vario-Module ccessories: See pages Horizontal Rails: From page 173 Horizontal Rails onfiguration Protection ategory: IP 40 for non-vented version Material/Surface Finish: Side panels: finished in RL 7035* Horizontal rails: finished in RL 7035 orner trim: Die-cast zinc, spray finished in RL 7035 overs: Sheet steel, spray finished in RL 7035 Side trim: finished in RL 7035 ontact points: onductive *olors: (see page 239) Front Horizontal Rail With 10 mm Extension For injector/extractor handles Order No. see page ) Equipped s n Instrument ase: Front corner trim must be 2) Equipped s Rack-Mounted Unit: Mounting flanges must be Included in the supply To be ordered separately, depending on application The front horizontal rails ( or B) and rear horizontal rails ( and D) are equipped as per the table on page

7 Order Information Ripac Vario-Module 4U, 6U Rail Ripac Vario-Module Packs 4U 6U Page type of (3 + 1) Installation width (HP) Depth (mm) Enclosure Order No. VM without vent holes Enclosure Order No. VM with vent holes e B B Expansion ccessories/individual Parts Top cover, solid Top cover, vented Bottom cover, solid Gland plate, vented orner trim pieces for assembly as Mounting flanges for assembly as rack-mounted unit without handle holes with handle holes Front horizontal rails (not suitable for depth-adjustable installation) B Front horizontal rails with 10 mm extension for injector/extractor handles (not suitable for depth-adjustable installation) 1 Rear horizontal rails D1 Rear horizontal rails, center E Rear adapter rail, center F Z rail DIN G Insulating strips (21HP) H onductive strips (84HP) I Threaded inserts EM Expansion K EM gaskets, horizontal for top/bottom cover to horizontal rail EM gaskets, vertical Front/rear panel, EM See pages Other ccessories Front / rear panels See pages arrying handles Front handles* crylic front door Rear adjustable feet *Only in conjunction with mounting flanges with handle hole 4U (3 + 1) 6U T = Depth HE = U TE = HP HE HE

8 Order Information Ripac Vario-Module 1U, 2U, 3U/84HP n Technical Specifications: May be used as a rack mounted unit or External dimensions to DIN , part 1 for installation in enclosures, mm (19") Installation dimensions for board type plug-in units to DIN , part 5 and DIN IE and IEEE / side panels 1 top cover with/without vent holes 1 bottom cover with/without vent holes 4 horizontal rails 4 threaded inserts 2 rear corner trim pieces for EM gaskets ssembly parts Horizontal Rails onfiguration Protection ategory: IP 40 for solid version Material/Surface Finish: Side panels: finished in RL 7035* Horizontal rails: finished in RL 7035 orner trim: Die-cast zinc, spray finished in RL 7035 overs: Sheet steel, spray finished in RL 7035 Side trim: finished in RL 7035 ontact points: onductive *olors: (see page 239) Ripac Vario-Module ccessories: See pages Horizontal Rails: From page 173 1) Equipped s n Instrument ase: Front corner trim must be 2) Equipped s Rack-Mounted Unit: Mounting flanges must be Included in the supply To be ordered separately, depending on application 243

9 Order Information Ripac Vario-Module 7U, 8U Rail Ripac Vario-Module 7/8U Packs 7U 8U Page type of (6 + 1) (2 x x 1) Installation width (HP) Depth (mm) Enclosure Order No. VM without vent holes Enclosure Order No. VM with vent holes e B B Expansion ccessories/individual Parts Top cover, non vented Top cover, vented Bottom cover, non vented Bottom cover, vented orner trim pieces for assembly as Mounting flanges for assembly as rack-mounted unit without handle holes with handle holes Front horizontal rails (not suitable for depth-adjustable installation) B Front horizontal rails, with 10 mm extension for injector/extractor handles not suitable for depth-adjustable installation) 1 Rear horizontal rails D1 Rear horizontal rails, center E Rear adapter rail, center F Z rail DIN G Insulating strips (21HP) H onductive strips (84HP) I Threaded inserts EM Expansion K EM gaskets, vertical See pages 171, 177, 188 Front/rear panel, EM See pages Other ccessories Front / rear panels See pages arrying handles Front handles* crylic front door Rear adjustable feet *Only in conjunction with mounting flanges with handle holes 7U (6 + 1) 8U (2 x x 1) T HE 6 HE e x 10 = f HE HE B1 B2 TE T = Depth HE = U TE = HP 8 HE

10 Order Information Ripac Vario-Module 7U, 8U n Technical Specifications: May be used as a rack mounted unit or External dimensions to DIN , part 1 for installation in enclosures, mm (19") Installation dimensions for board type plug-in units to DIN , part 5 and DIN IE and IEEE / side panels 1 top cover with/without vent holes 1 bottom cover with/without vent holes 4 horizontal rails 4 threaded inserts 2 rear corner trim pieces for EM gaskets 2 side trim pieces, center Protection ategory: IP 40 for non-vented version ssembly parts Horizontal Rails onfiguration Material/Surface Finish: Side panels: finished in RL 7035* D Horizontal rails: finished in RL 7035 orner trim: Die-cast zinc, spray finished in RL 7035 overs: Sheet steel, spray finished in RL 7035 Side trim: finished in RL 7035 ontact points: onductive *olors: (see page 239) Ripac Vario-Module ccessories: See pages Horizontal Rails: From page 173 B B B 1) Equipped s n Instrument ase: Front corner trim must be 2) Equipped s Rack-Mounted Unit: Mounting flanges must be Included in the supply To be ordered separately, depending on application B 245

11 ccessories Ripac Vario-Module Enclosure Population System components from the Ripac range can be used for individual interior installation of the enclosures (see page 149.) Feet With fold-out support stand. Load capacity up to 20 kg. Plastic, RL 7035 Packs of Order No Front Flanges Required when the Ripac Vario-Module is to be used as a rack-mounted enclosure. The flanges have a channel to hold vertical EM gaskets. Order No. see page 171. luminum, clear chromated U Packs Order No.* Order No.** of * * * ** * ** * ** * ** * ** *Without handle holes **With handle holes Front orner Trim Pieces Required when the Ripac Vario-Module is to be used as an. The corner trim pieces have a channel to hold vertical EM gaskets. Order No. see page 171. Die-cast zinc olor: RL 7035 U Packs of Order No Front Handles an only be used in conjunction with mounting flanges with handle holes. Die-cast zinc, spray finished For U Packs of Order No. 3 and and EM Gaskets The enclosures can be fitted or retro-fitted to meet EM requirements using EM gaskets from the Ripac range. EM gaskets, vertical Order No. see page 171. EM gaskets, horizontal Order No. see page 177. Front Panels/Rear Panels To cover the front and rear of the enclosure. lso available with hinges, vented for fan installation, or as an EM version. Order No. see pages

12 ccessories Ripac Vario-Module n arrying Handles For ergonomic transportation, even with stacked cases. May also be used as a support stand. Not suitable for use in conjunction with flanges. Maximum load 350 N. Die-cast zinc and extruded aluminum section, spray finished in RL For enclosure depth Packs of Order No mm mm mm mm German patent no Rear djustable Feet For retro-fitting to the rear. Dual function: Mechanical protection of connection components lso acts as a cable tidy during transportation P, color RL 7035 to UL 94-V0, self-extinguishing Packs of Order No Earthing Set For connecting the cover plates/gland plates to the side panels with PE conductors. Green/yellow PE conductor cable, 1.5mm 2, with washer, flat eyebolt and assembly parts Packs of Order No Support Stand/arrying Handle To fit all 3U, 4U and 6U enclosures, adjustable on a 30 degree increments. Extruded aluminum section/die-cast, spray finished in RL support stand/carrying handle, assembly parts Note: orner trim for support stands/carrying handles should be For Ripac Packs Order No. Vario-Module of 42HP HP HP German patent no orner trim Packs Order No. for VM of 3U U U crylic Front Doors, Hinged To protect installed control components. Side panels: luminum, spray finished in RL 7035 Window: Smoked acrylic 1 front door, assembly parts U For Ripac Packs of Order No. Vario-Module 3 42HP HP HP HP HP HP German patent no Keyboard Lid 4U, 84 HP For retrospective, front mounting on a 4U high, 84HP wide Ripac Vario-Module. Suitable for accommodating mechanical or sealed-membrane keyboards. luminum, spray finished in RL 7035 U Packs of Order No