Fiberglass Enclosures

Transcription

1 Fiberglass Enclosures

2 FIBREGLASS ENCLOSURES quadri in vetroresina IP66 FIBreGLASS ENCLOSURES J 7 sizes J Modular and adjustable frame J Din rails adjustable in height J Removable panels J Robust construction J Innovative design J Snap-on fixing and ¼ turn screws J Designed for installations at temperature 25 through 60 C J Glow wire 960 fibreglass enclosures J Line suitable for assembled units complying with Standard EN Product overview 4-5 Table for product selection 6-7 Technical specifications 8-0 Dimensional drawings 2

3 FIBREGLASS ENCLOSURES IP66 WINDOW DOOR VERSION J 7 sizes J Modular and adjustable frame J Din rails adjustable in height J Removable panels J Robust construction J Innovative design J Snap-on fixing and ¼ turn screws J Designed for installations at temperature 25 through 60 C J Glow wire 960 for window door version J Line suitable for assembled units complying with Standard EN Product overview 4-5 Table for product selection 6-7 Technical specifications 8-0 Dimensional drawings 3

4 FIBREGLASS ENCLOSURES Product overview Metal back plate Available also in insulating material Optional plate adjustment bracket Inner door with ergonomic handle Door left or right hinged Film protected window 4

5 Wall support Assembled rails for the fixing of frames Innovative module cover Centre-to-centre distance: 25 mm (36 modules) 50 mm (from 54 up to 40 modules) 200 mm (90 modules) Possibility of adjustment on 2 levels Removable panel, snap on installation 5

6 FIBreGLASS ENCLOSURES Table for product selection FIBreGLASS ENCLOSURES WINDOW DOOR VERSION mounting insulating inner plate mounting door Plate * * pcs x box n modules dissipated power EMP EPP eid Code Sizes mm Code p W Code Code Code vtr 0 plain 300x265x vtr 0 glazed Door 300x265x vtr 02 plain 425x325x vtr 02 glazed Door 425x325x (2x3) vtr 03 plain 500x430x vtr 03 glazed Door 500x430x (8x3) vtr 04 plain 650x430x vtr 04 glazed Door 650x430x (8x4) vtr 05 plain 650x540x vtr 05 glazed Door 650x540x (24x4) vtr 06 plain 805x65x vtr 06 glazed Door 805x65x (28x5) vtr 07 plain 060x80x vtr 07 glazed Door 060x80x (38x5) () DIn Rails + module frame assembling (Din rail distance 48 mm from the module frame) (2) mounting plate assembling (in the lowest position) Colour 66 20J 6 grey RAL 7035 CEI 23-48/23-49 EN RINA ITALY (without Door Version only) protection IP impact resistance

7 MODule frame blind panel double blind panel din vertical wall adjustment rail FRAMe brackets device for assembly mounting plate ACCESSORY FOR POLE MOUNTING * * * * * EMF EBP EBPD EDR EVF EMB EPAB Code Code Code Code Code Code Code FIAP Code ACCESSORY FOR THE POLE MOUNTING OF THE ENCLOSURE J Hot dip galvanized steel accessory for installation on round poles J Constituted by two jaws and relevant screws for pole sizes from 48 to 80 mm dia J For pole diameters from 80 to 200 mm, use metal strapping (not included) instead of the screws () GALVANIZED STEEL (2) stainless steel cover strip for MODULE COVER CODE 0580 LOCK CODE EKL

8 FIBreGLASS ENCLOSURES Adjustment of din rail centre-to-centre The innovative din rail assembly allows the easy installation of STD electrical devices (48 and 75 mm) simply operating on the central screw This operation is possible inside the enclosure or before its installation Din rail positioning into the guide The exclusive internal design of the enclosure allows the highest possible flexibility for the din rail positioning ¼ turn screw assures quick and easy fixing Installation of modular kit Quick assembly / Removal of module cover 8

9 FIBreGLASS ENCLOSURES Mounting of blank panel door hinging allows 80 degree swing Single or double snap-in covering panels can be installed using just a screw driver The wide angle door opening prevents breaking when the enclosure is installed Frame assembling Wiring ducts fixing system Panels can be assembled separately for easier wiring Centre-to-centre: 25 mm (36 modules) 50 mm (from 54 to 40 modules) 200 mm (90 modules) Wiring ducts T and T-E can be easily mounted on the frame through a special fixing accessory 9

10 FIBreGLASS ENCLOSURES Mounting Plate Assembly Inner door assembling Non modular devices can be installed inside enclosure by using the mounting plate, which can be installed in different positions by using the adjustment brackets (code EPAB 04682) The special profile of the inner door assures a good distance from the outer door The inner door allows right or left hinging on 2 depth positions and is equipped with ergonomic handle Wall brackets Optional key lock Optional wall-brackets are available in stainless steel or galvanized steel A key lock is available in addition to the standard key to provide maximum security 0

11 FIBreGLASS ENCLOSURES Dimensional drawings SOLID/WINDOW TYPE L I D E F F F 74 U 44 V 27 N A M C H G B DISTANCES BETWEEN DOOR AND SLOTTED PANEL N 2 POSSIBLE DISTANCES BETWEEN INNER AND OUTER DOOR (except size 07 which has values 50/80) DISTANCE BETWEEN MOUNTING PLATE AND INNER DOOR Size/description DIMENSIONS A B C D E F F G H I L M N U V VTR VTR VTR VTR VTR VTR VTR MODULES 36 (3x2) 54 (3x8) 72 (4x8) 96 (4x24) 40 (5x28) 90 (5x38) Mounting plate Insulating mounting plate Inner door O Q O 4 R T P Wall brackets P S Size/description dimensions O P Q R S T VTR ,5 2 VTR , VTR , VTR VTR VTR VTR

12