2011 ilinq CATALOGUE

Transcription

1 2011 ilinq CATALOGUE

2 Company Overview A brand built on quality B&R Enclosures is Australia s leading manufacturer of electrical enclosures, with a comprehensive range of products designed for industrial conditions, and the severe environments so common in Australia. Industrial Enclosures & Switchboards B&R Enclosures manufactures a range of electrical enclosures for a variety of applications in industrial, mining, switchboards and process control. Since operations began in 1955, B&R Enclosures has been a leading manufacturer of electrical enclosures to the Australian market. Hazardous Area Equipment B&R Ex Systems is a new division of B&R Enclosures specialising in the supply of electrical equipment for hazardous areas. B&R Ex Systems offer a comprehensive range of enclosures, lighting, controls and glanding, as well as custom control fitouts. Data Racks and Cabinets B&R Data Systems is a leading Australian manufacturer of high quality products and solutions for the Australian ICT, Telecommunications and Data Centre markets. B&R Data Systems specialise in server and network racks, power management, cooling, cable management and security solutions. Commerical & Domestic Metering Enclosures Hager B&R is a joint venture between B&R and Hager, representing B&R s domestic and commercial range of enclosures. These include domestic metering enclosures & connection equipment (meter boxes), commercial metering enclosures and switchboards up to 630 Amps. B&R engages in a policy of continuous development and improvement of its products. Therefore the Company reserves the right to alter, add and/or delete specificiations of any product or equipment without notice and without incurring liability.

3 Contents Introduction Overview...2 Single Door Enclosure Overview...4 Double Door Enclosure Overview...5 Enclosure Selection Guide...6 Size Selection Charts 1800 high, 400 deep high, 600 deep high, 800 deep high, 400 deep high, 600 deep high, 800 deep high, 400 deep high, 600 deep high, 800 deep...15 Product Information General Accessories...16 Single Door Enclosure...18 Double Door Enclosure...20 Frame...22 Single Door...24 Double Door...26 Cladding...28 Top Cover...30 Gland Plate & Frame...32 Adjustable Gland Plate System...34 Mounting Pan...36 Swing Frame...38 Swing Frame Trim " Rack Rails...42 Internal Rail System...44 Hinged Escutcheon...46 Plinth Kit...48 Plinth Cladding...50 Plinth Mounting Base...52 Plan Holder...54 Laptop Lectern...56 Light Kits...58 Technical Guide IP Ratings Chart...60

4 Overview B&R manufacture a range of products to suit various environments and locations. Some enclosures are suited to highly specific applications whilst others have been designed for a wide variety of uses. We call these multiple application enclosure systems. These multiple application systems are available with a wide range of accessories to better allow the enclosures to be configured to suit the application. The benefit of a multiple application enclosure is that you are able to order your highly specific requirement to arrive quickly and costeffectively, by configuring a standard enclosure with a range of accessories. ilinq is our newest multiple application enclosure system and is suitable for a range of applications including: Industrial automation Control system & plant construction Electronic packaging Information technology Networking infrastructure Telecommunications ilinq is a bayable enclosure system that can be configured to suit a wide variety of applications. It features a unique symmetrical rail profile that allows components to be interchangeable whether on top, bottom, front or back. As part of the design process B&R has worked with a wide variety of industry experts to ensure ilinq suits industry specifications and applications. The enclosures are available in single or double door configurations and can be quickly and easily bayed together. A standard enclosure comes preassembled with frame, door, fixed rear panel, top (with eye bolts), gland plate system and mounting pan. If required as a stand alone enclosure, side panels or doors can be purchased separately. Once bayed together or fitted with side panels, enclosures are rated to IP55, ensuring limited ingress of dust and complete protection from low pressure jets of water. An extensive range of cladding components and accessories are available, and all components that make up an enclosure can be purchased individually, so that a solution can be configured to meet your exact requirements. 2 Introduction

5 Why buy ilinq? The ultimate enclosure solution for multiple applications. ilinq is an Australian designed and manufactured, high quality, modular, bayable enclosure system, that is extremely versatile and easy to install. B&R developed the ilinq range in response to demand from our customers for a user friendly bayable enclosure system which was both easy to use and cost-effective. Some of the key features of ilinq are: Easy to order Easy to assemble Easy to install Flexible design Panel cutouts and paint any powdercoat colour (special order) Easy to order The symmetrical design of the enclosure system allows the same part to fit many locations. The easy to use catalogue clearly lists all parts and accessories for each enclosure size. All B&R staff have had extensive assembly training and are available to help configure your ilinq bayable enclosure system. Easy to assemble ilinq enclosures are delivered preassembled with front door, rear panel, gland plate system, mounting pan and flat top. All components can also be purchased separately for applications which require a special configuration. Cladding can be taken off and rotated very quickly. A door can be changed from right to left hand hinging in less than 5 minutes. For ease of installation, there are only 5 metric hex drive keys required 2½, 3, 4, 5, 6. All fixings are hex drive button head set screws and taptites. M6 and M8 front access cage nuts and M5 taptites are used throughout the enclosures, at 25mm increments. Easy to install The plinth system allows levelling from inside the enclosure frame. One person can bay ilinq enclosures together using hand tools or a battery drill. B&R Enclosures ilinq Catalogue

6 Single Door Enclosure Overview Top Cover Flat Eye Bolts Fixed Cladding* Frame Mounting Pan Door Gland Plate System *All side cladding sold separately ilinq Single Door Enclosure 1800mm high Model LQE LQE LQE LQE LQE LQE LQE LQE LQE Height (mm) Width (mm) Depth (mm) mm high Model LQE LQE LQE LQE LQE LQE LQE LQE LQE Height (mm) Width (mm) Depth (mm) mm high Model LQE LQE LQE LQE LQE LQE LQE LQE LQE Height (mm) Width (mm) Depth (mm) Introduction

7 Double Door Enclosure Overview Eye Bolts Top Cover Flat Frame Fixed Cladding* Mounting Pan Door second closing Door first closing Gland Plate System *All side cladding sold separately ilinq Double Door Enclosure 1800mm high Model LQE180804/DD LQE181004/DD LQE181204/DD LQE180806/DD LQE181006/DD LQE181206/DD LQE180808/DD LQE181008/DD LQE181208/DD Height (mm) Width (mm) Depth (mm) mm high Model LQE200804/DD LQE201004/DD LQE201204/DD LQE200806/DD LQE201006/DD LQE201206/DD LQE200808/DD LQE201008/DD LQE201208/DD Height (mm) Width (mm) Depth (mm) mm high Model LQE220804/DD LQE221004/DD LQE221204/DD LQE220806/DD LQE221006/DD LQE221206/DD LQE220808/DD LQE221008/DD LQE221208/DD Height (mm) Width (mm) Depth (mm) B&R Enclosures ilinq Catalogue

8 Enclosure Selection Guide Enclosure Features Galvanised roll formed profile Stainless steel hinge pins Symmetrical frame Patented 100mm & 200mm plinth system Front access M6 & M8 cage nuts in frame Materials Frame galvanised steel Thickness 1.5 mm Cladding zinc coated steel Thickness 1.6 mm Gasket polyurethane foamed in place Surface finish powdercoated RAL7035 Protection rating IP55 ilinq enclosures feature a unique symmetrical rail profile that allows components to be interchangeable whether on top, bottom, front or back. The enclosures are available in single or double door configurations and can be quickly and easily bayed together. Once bayed together or fitted with cladding, enclosures are rated to IP55, ensuring limited ingress of dust and complete protection from low pressure jets of water. The enclosure is powdercoated with a light grey RAL7035 ripple finish. Other colours and solutions are available upon request. Inclusions Frame Rear fixed panel (screw on type) Flat top with eye bolts Solid door (1000mm & 1200mm wide cabinets are fitted with double doors) Quarter turn lock with a 7mm square insert 3mm thick galvanised mounting pan Fixed gland plate 1.6mm thick galvanised steel plate (2 per set on double door enclosures) How to order Step 1 Select enclosure model size from Size Selection Chart (pages 7 15). The charts are categorised by height and depth (one page displays one height and depth with widths available) and is incremented from smallest to largest height. Step 2 Select cladding & mounting components from the range listed in the size selection column under the selected enclosure. Step 3 Select accessories from the range listed in the selected enclosure column in the size selection chart. Step 4 If additional information is required see dimensions section (from page 16 59) or contact your local B&R sales office. Step 5 Contact local sales office to place order and/or arrange for any special requirements such as punching or specific powdercoat colours. 6 Introduction

9 Size Selection Chart 1800 High, 400 Deep Single Door Double Door (DD) Page Enclosure Width (mm) DD 1000 DD 1200 DD Enclosure LQE LQE LQE LQE180804/DD LQE181004/DD LQE181204/DD Enclosure includes frame, door, fixed rear panel, flat top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths. Cladding & Mounting Components Description DD 1000 DD 1200 DD Page Side Side Cladding CP hinged LQCP1804 LQCP1804 LQCP1804 LQCP1804 LQCP1804 LQCP Cladding CF fixed LQCF1804 LQCF1804 LQCF1804 LQCF1804 LQCF1804 LQCF Door solid LQD1804 LQD1804 LQD1804 LQD1804 LQD1804 LQD Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP Plinth cladding 100 mm LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC Plinth cladding 200 mm LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC Side cladding and plinth components not included in enclosure (LQE) assembly Introduction Accessories # Items required with component Description DD 1000 DD 1200 DD Page Swing Frames Swing Frame (RU) LQSF36U LQSF36U LQSF36U # Rail horizontal (2) # LQRF06 # LQRF08 # LQRF Size Selection Charts Trim side LQSS36U08 LQSS36U Trims centre (2) LQSC36U08 LQSC36U # Set of 2 Horizontal rails required with each swing frame sold. Swing frame trims optional Escutcheon hinged 1800 high enclosure equals 17 x 100mm internal escutcheon modules Escutcheon LQHE1706 LQHE1708 LQHE # Rail vertical # LQRV17 # LQRV17 # LQRV Rail horizontal LQRH06 LQRH08 LQRH # Vertical rails required with each escutcheon Horizontal rails optional Plan Holder 35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD # 1 required when fitting plan holder Laptop Lectern Laptop lectern LQLL LQLL LQLL # Door rail # LQRD06 # LQRD08 # LQRD # 2 required when fitting laptop lecterns Light Kits Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L Door Rail Product Information Technical Guide Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD B&R Enclosures ilinq Catalogue

10 Enclosure Selection Guide 1800 High, 600 Deep Single Door Double Door (DD) Page Enclosure Width (mm) DD 1000 DD 1200 DD Enclosure LQE LQE LQE LQE180806/DD LQE181006/DD LQE181206/DD Enclosure includes frame, door, fixed rear panel, flat top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths. Cladding & Mounting Components Description DD 1000 DD 1200 DD Page Cladding CP hinged LQCP1806 LQCP1806 LQCP1806 LQCP1806 LQCP1806 LQCP Side Side Cladding CF fixed LQCF1806 LQCF1806 LQCF1806 LQCF1806 LQCF1806 LQCF Door LQD1806 LQD1806 LQD1806 LQD1806 LQD1806 LQD Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP Plinth cladding 100 mm LQPC0106 LQPC0106 LQPC0106 LQPC0106 LQPC0106 LQPC Plinth cladding 200 mm LQPC0206 LQPC0206 LQPC0206 LQPC0206 LQPC0206 LQPC Side cladding and plinth components not included in enclosure (LQE) assembly Accessories # Items required with component Description DD 1000 DD 1200 DD Page Swing Frames Swing Frame (RU) LQSF36U LQSF36U LQSF36U # Rail - horizontal # LQRF06 # LQRF08 # LQRF Trim side LQSS36U08 LQSS36U Trim centre LQSC36U08 LQSC36U # Horizontal rails required with each swing frame sold. Swing frame trims optional Escutcheon - hinged 1800 high enclosures equals 17 x 100mm internal escutcheon modules Escutcheon LQHE1706 LQHE1708 LQHE # Rail vertical # LQRV17 # LQRV17 # LQRV Rail horizontal LQRH06 LQRH08 LQRH # Vertical rails required with each escutcheon Horizontal rails optional Plan Holder 35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD # 1 required when fitting plan holder Laptop Lectern Laptop lectern LQLL LQLL LQLL # Door rail # LQRD06 # LDRD08 # LQRD # 2 required when fitting laptop lecterns Light Kits Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L Door Rail Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD Size Selection Chart

11 Size Selection Chart 1800 High, 800 Deep Single Door Double Door (DD) Enclosure Width (mm) DD 1000 DD 1200 DD Page Enclosure LQE LQE LQE LQE180808/DD LQE181008/DD LQE181208/DD Enclosure includes frame, door, fixed rear panel, flat top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths. Cladding & Mounting Components Description DD 1000 DD 1200 DD Page Side Cladding CP hinged LQCP1808 LQCP1808 LQCP1808 LQCP1808 LQCP1808 LQCP Cladding CF fixed LQCF1808 LQCF1808 LQCF1808 LQCF1808 LQCF1808 LQCF Door LQD1808 LQD1808 LQD1808 LQD1808 LQD1808 LQD Introduction Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP Side Plinth cladding 100 mm LQPC0108 LQPC0108 LQPC0108 LQPC0108 LQPC0108 LQPC Plinth cladding 200 mm LQPC0208 LQPC0208 LQPC0208 LQPC0208 LQPC0208 LQPC Side cladding and plinth components not included in enclosure (LQE) assembly Accessories # Items required with component Description DD 1000 DD 1200 DD Page Swing Frames Size Selection Charts Swing Frame (RU) LQSF36U LQSF36U LQSF36U # Rail horizontal # LQRF06 # LQRF08 # LQRF Trim side LQSS36U08 LQSS36U Trim centre LQSC36U08 LQSC36U # Horizontal rails required with each swing frame sold. Swing frame trims optional Escutcheon hinged 1800 high enclosures equals 17 x 100mm internal escutcheon modules Escutcheon LQHE1706 LQHE1708 LQHE # Rail vertical # LQRV17 # LQRV17 # LQRV Rail horizontal LQRH06 LQRH08 LQRH # Vertical rails required with each escutcheon Product Information Horizontal rails optional Plan Holder 35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD # 1 required when fitting plan holder Laptop Lectern Laptop lectern LQLL LQLL LQLL # Door rail # LQRD06 # LQRD08 # LQRD # 2 required when fitting laptop lecterns Technical Guide Light Kits Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L Door Rail Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD B&R Enclosures ilinq Catalogue

12 Size Selection Chart 2000 High, 400 Deep Single Door Double Door (DD) Page Enclosure Width (mm) DD 1000 DD 1200 DD Enclosure LQE LQE LQE LQE200804/DD LQE201004/DD LQE201204/DD Enclosure includes frame, door, fixed rear panel, flat top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths. Cladding & Mounting Components Description DD 1000 DD 1200 DD Page Cladding CP - hinged LQCP2004 LQCP2004 LQCP2004 LQCP2004 LQCP2004 LQCP Side Side Cladding CF - fixed LQCF2004 LQCF2004 LQCF2004 LQCF2004 LQCF2004 LQCF Door LQD2004 LQD2004 LQD2004 LQD2004 LQD2004 LQD Plinth kit -100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP Plinth kit mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP Plinth cladding mm LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC Plinth cladding mm LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC Side cladding and plinth components not included in enclosure (LQE) assembly Accessories # Items required with component Description DD 1000 DD 1200 DD Page Swing Frames Swing Frame (RU) LQSF40U LQSF40U LQSF40U # Rail horizontal # LQRF06 # LQRF08 # LQRF Trim side LQSS40U08 LQSS40U Trim centre LQSC40U08 LQSC40U # Horizontal rails required with each swing frame sold. Swing frame trims optional Escutcheon hinged 2000 high enclosures equals 19 x 100mm internal escutcheon modules Escutcheon LQHE1906 LQHE1908 LQHE # Rail vertical # LQRV19 # LQRV19 # LQRV Rail horizontal LQRH06 LQRH08 LQRH # Vertical rails required with each escutcheon Horizontal rails optional Plan Holder 35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/ # Door rail # LQRD06 # LQRD # LQRD mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD # 1 required when fitting plan holder Laptop Lectern Laptop lectern LQLL LQLL LQLL # Door rail # LQRD06 # LQRD08 # LQRD # 2 required when fitting laptop lecterns Light Kits Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L Door Rail Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD Size Selection Chart

13 Size Selection Chart 2000 High, 600 Deep Single Door Double Door (DD) Page Enclosure Width (mm) DD 1000 DD 1200 DD Enclosure LQE LQE LQE LQE200806/DD LQE201006/DD LQE201206/DD Enclosure includes frame, door, fixed rear panel, flat top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths. Cladding & Mounting Components Description DD 1000 DD 1200 DD Page Side Side Cladding CP hinged LQCP2006 LQCP2006 LQCP2006 LQCP2006 LQCP2006 LQCP Cladding CF fixed LQCF2006 LQCF2006 LQCF2006 LQCF2006 LQCF2006 LQCF Door LQD2006 LQD2006 LQD2006 LQD2006 LQD2006 LQD Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP Plinth cladding 100 mm LQPC0106 LQPC0106 LQPC0106 LQPC0106 LQPC0106 LQPC Plinth cladding 200 mm LQPC0206 LQPC0206 LQPC0206 LQPC0206 LQPC0206 LQPC Side cladding and plinth components not included in enclosure (LQE) assembly Introduction Accessories # Items required with component Description DD 1000 DD 1200 DD Page Swing Frames Swing Frame (RU) LQSF40U LQSF40U LQSF40U # Rail horizontal # LQRF06 # LQRF08 # LQRF Size Selection Charts Trim side LQSS40U08 LQSS40U Trim centre LQSC40U08 LQSC40U # Horizontal rails required with each swing frame sold. Swing frame trims optional Escutcheon - hinged 2000 high enclosures equals 19 x 100mm internal escutcheon modules Escutcheon LQHE1906 LQHE1908 LQHE # Rail vertical # LQRV19 # LQRV19 # LQRV Rail horizontal LQRH06 LQRH08 LQRH # Vertical rails required with each escutcheon Horizontal rails optional Plan Holder 35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD # 1 required when fitting plan holder Laptop Lectern Laptop lectern LQLL LQLL LQLL # Door rail # LQRD06 # LQRD08 # LQRD # 2 required when fitting laptop lecterns Light Kits Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L Door Rail Product Information Technical Guide Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD B&R Enclosures ilinq Catalogue

14 Size Selection Chart 2000 High, 800 Deep Single Door Double Door (DD) Page Enclosure Width (mm) DD 1000 DD 1200 DD Enclosure LQE LQE LQE LQE200808/DD LQE201008/DD LQE201208/DD Enclosure includes frame, door, fixed rear panel, flat top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths. Cladding & Mounting Components Description DD 1000 DD 1200 DD Page Cladding CP hinged LQCP2008 LQCP2008 LQCP2008 LQCP2008 LQCP2008 LQCP Side Side Cladding CF fixed LQCF2008 LQCF2008 LQCF2008 LQCF2008 LQCF2008 LQCF Door LQD2008 LQD2008 LQD2008 LQD2008 LQD2008 LQD Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP Plinth cladding 100 mm LQPC0108 LQPC0108 LQPC0108 LQPC0108 LQPC0108 LQPC Plinth cladding 200 mm LQPC0208 LQPC0208 LQPC0208 LQPC0208 LQPC0208 LQPC Side cladding and plinth components not included in enclosure (LQE) assembly Accessories # Items required with component Description DD 1000 DD 1200 DD Page Swing Frames Swing Frame (RU) LQSF40U LQSF40U LQSF40U # Rail horizontal # LQRF06 # LQRF08 # LQRF Trim side LQSS40U08 LQSS40U Trim centre LQSC40U08 LQSC40U # Horizontal rails required with each swing frame sold. Swing frame trims optional Escutcheon - hinged 2000 high enclosures equals 19 x 100mm internal escutcheon modules Escutcheon LQHE1906 LQHE1908 LQHE # Rail vertical # LQRV19 # LQRV19 # LQRV Rail horizontal LQRH06 LQRH08 LQRH # Vertical rails required with each escutcheon Horizontal rails optional Plan Holder 35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD # 1 required when fitting plan holder Laptop Lectern Laptop lectern LQLL LQLL LQLL # Door rail # LQRD06 # LQRD08 # LQRD # 2 required when fitting laptop lecterns Light Kits Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L Door Rail Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD Size Selection Chart

15 Size Selection Chart 2200 High, 400 Deep Single Door Double Door (DD) Page Enclosure Width (mm) DD 1000 DD 1200 DD Enclosure LQE LQE LQE LQE220804/DD LQE221004/DD LQE221204/DD Enclosure includes frame, door, fixed rear panel, flat top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths. Cladding & Mounting Components Description DD 1000 DD 1200 DD Page Side Side Cladding CP hinged LQCP2204 LQCP2204 LQCP2204 LQCP2204 LQCP2204 LQCP Cladding CF fixed LQCF2204 LQCF2204 LQCF2204 LQCF2204 LQCF2204 LQCF Door LQD2204 LQD2204 LQD2204 LQD2204 LQD2204 LQD Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP Plinth cladding 100 mm LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC Plinth cladding 200 mm LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC Side cladding and plinth components not included in enclosure (LQE) assembly Introduction Accessories # Items required with component Description DD 1000 DD 1200 DD Page Swing Frames Swing Frame (RU) LQSF45U LQSF45U LQSF45U # Rail horizontal # LQRF06 # LQRF08 # LQRF Size Selection Charts Trim side LQSS45U08 LQSS45U Trim centre LQSC45U08 LQSC45U # Horizontal rails required with each swing frame sold. Swing frame trims optional Escutcheon hinged 2200 high enclosures equals 21 x 100mm internal escutcheon modules Escutcheon LQHE2106 LQHE2108 LQHE # Rail vertical # LQRV21 # LQRV21 # LQRV Rail horizontal LQRH06 LQRH08 LQRH # Vertical rails required with each escutcheon Horizontal rails optional Plan Holder 35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD # 1 required when fitting plan holder Laptop Lectern Laptop lectern LQLL LQLL LQLL # Door rail # LQRD06 # LQRD08 # LQRD # 2 required when fitting laptop lecterns Light Kits Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L Door Rail Product Information Technical Guide Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD B&R Enclosures ilinq Catalogue

16 Size Selection Chart 2200 High, 600 Deep Single Door Double Door (DD) Page Enclosure Width (mm) DD 1000 DD 1200 DD Enclosure LQE LQE LQE LQE220806/DD LQE221006/DD LQE221206/DD Enclosure includes frame, door, fixed rear panel, flat top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths. Cladding & Mounting Components Description DD 1000 DD 1200 DD Page Cladding CP hinged LQCP2206 LQCP2206 LQCP2206 LQCP2206 LQCP2206 LQCP Side Side Cladding CF fixed LQCF2206 LQCF2206 LQCF2206 LQCF2206 LQCF2206 LQCF Door LQD2206 LQD2206 LQD2206 LQD2206 LQD2206 LQD Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP Plinth cladding 100 mm LQPC0106 LQPC0106 LQPC0106 LQPC0106 LQPC0106 LQPC Plinth cladding 200 mm LQPC0206 LQPC0206 LQPC0206 LQPC0206 LQPC0206 LQPC Side cladding and plinth components not included in enclosure (LQE) assembly Accessories # Items required with component Description DD 1000 DD 1200 DD Page Swing Frames Swing Frame (RU) LQSF45U LQSF45U LQSF45U LQSF45U LQSF45U # Rail horizontal # LQRF06 # LQRF08 # LQRF Trim side LQSS45U08 LQSS45U Trim centre LQSC45U08 LQSC45U # Horizontal rails required with each swing frame sold. Swing frame trims optional Escutcheon hinged 2200 high enclosures equals 21 x 100mm internal escutcheon modules Escutcheon LQHE2106 LQHE2108 LQHE # Rail vertical # LQRV21 # LQRV21 # LQRV Rail horizontal LQRH06 LQRH08 LQRH # Vertical rails required with each escutcheon Horizontal rails optional Plan Holder 35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD # 1 required when fitting plan holder Laptop Lectern Laptop lectern LQLL LQLL LQLL # Door rail # LQRD06 # LQRD08 # LQRD # 2 required when fitting laptop lecterns Light Kits Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L Door Rail Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD Size Selection Chart

17 Size Selection Chart 2200 High, 800 Deep Single Door Double Door (DD) Page Enclosure Width (mm) DD 1000 DD 1200 DD Enclosure LQE LQE LQE LQE220808/DD LQE221008/DD LQE221208/DD Enclosure includes frame, door, fixed rear panel, flat top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths. Cladding & Mounting Components Description DD 1000 DD 1200 DD Page Side Side Cladding CP hinged LQCP2208 LQCP2208 LQCP2208 LQCP2208 LQCP2208 LQCP Cladding CF fixed LQCF2208 LQCF2208 LQCF2208 LQCF2208 LQCF2208 LQCF Door LQD2208 LQD2208 LQD2208 LQD2208 LQD2208 LQD Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP Plinth cladding 100 mm LQPC0108 LQPC0108 LQPC0108 LQPC0108 LQPC0108 LQPC Plinth cladding 200 mm LQPC0208 LQPC0208 LQPC0208 LQPC0208 LQPC0208 LQPC Side cladding and plinth components not included in enclosure (LQE) assembly Introduction Accessories # Items required with component Description DD 1000 DD 1200 DD Page Swing Frames Swing Frame (RU) LQSF45U LQSF45U LQSF45U LQSF45U LQSF45U # Rail - horizontal # LQRF06 # LQRF08 # LQRF Size Selection Charts Trim - side LQSS45U08 LQSS45U Trim - centre LQSC45U08 LQSC45U # Horizontal rails required with each swing frame sold. Swing frame trims optional Escutcheon - hinged 2200 high enclosures equals 21 x 100mm internal escutcheon modules Escutcheon LQHE2106 LQHE2108 LQHE # Rail vertical # LQRV21 # LQRV21 # LQRV Rail horizontal LQRH06 LQRH08 LQRH # Vertical rails required with each escutcheon Horizontal rails optional Plan Holder 35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/ # Door rail # LQRD06 # LQRD08 # LQRD * 1 required when fitting plan holder Laptop Lectern Laptop lectern LQLL LQLL LQLL # Door rail # LQRD06 # LQRD08 # LQRD # 2 required when fitting laptop lecterns Light Kits Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L Door Rail Product Information Technical Guide Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD B&R Enclosures ilinq Catalogue

18 General Accessories Baying Accessories Catalogue No LQBK LQMF1801 LQMF2001 LQMF2201 Description Baying kit (8 external / 10 internal) Mounting pan infill 1800 high Mounting pan infill 2000 high Mounting pan infill 2200 high Baying kit and mounting pan infill panel Locks Catalogue No Description LQLA7S Lock assembly 7mm square LQLS/92268 Swing handle, keylockable (92268) SKZ Key - ZA27 3 way (7 mm, 8 mm, 3 mm ) SK8 Key - Metal (8 mm ) LQLI8S Lock insert 8mm square LQLI8T Lock insert 8mm triangle LQLI3D Lock insert 3mm double bit 7mm Square Turnbuckle Lock Assembly Swing Handle Lock SKZ key Square Lock Insert 16 Product Information

19 General Accessories Catalogue No LQDS Description Door Stay (white) Fixings Catalogue No Description Pack Qty LQCG06 Cage nuts M6 (front access) 20 LQCG08 Cage nuts M8 (front access) 20 IPCG06 Cage nuts M6 (rear access) 20 IPCG08 Cage nuts M8 (rear access) 20 LQB0612 Button head hex drive set screws (M6 x 12) 20 LQB0812 Button head hex drive set screws (M8 x 12) 20 LQB0512 Button head hex drive set screws (M5 x 12) 20 LQB0616 Button head hex drive set screws (M6 x 16) 20 LQB0620 Button head hex drive set screws (M6 x 20) 20 LQB0625 Button head hex drive set screws (M6 x 25) 20 LQB0825 Button head hex drive set screws (M8 x 25) 20 IPWS06 Star washers M6 20 Front access cage nut Button head hex drive set screw Rear access cage nut Introduction Size Selection Charts IPWS08 Star washers M8 20 IPWF06 Flat washers M6 20 IPWF08 Flat washers M8 20 Star washers Flat washers Technical Guide Product Information For more information visit B&R Enclosures ilinq Catalogue

20 Single Door Enclosure brenclosures.com.au/lqse.htm Enclosure Features Galvanised roll formed profile Stainless steel hinge pins Symmetrical frame Patented plinth system (optional) Front access M6 & M8 cage nuts in frame Materials Frame galvanised steel Thickness 1.5mm Cladding zinc coated steel Thickness 1.6mm Gasket polyurethane foamed in place Surface finish powdercoated RAL7035 Protection rating IP55 ilinq single door enclosures feature a unique symmetrical rail profile that allows components to be interchangeable whether on top, bottom, front or back. The enclosures can be bayed with any combination of single or double door enclosure widths. The heights and depths must be the same. Once bayed together or fitted with side panels, enclosures are rated to IP55, ensuring limited ingress of dust and complete protection from low pressure jets of water. The enclosure is powdercoated with a light grey RAL7035 ripple finish. Other options and solutions are available upon request. Inclusions Frame Rear fixed panel (screw on type) Flat top with four eye bolts Solid door Quarter turn lock with a 7mm square insert Mounting pan 3mm thick galvanised Fixed gland plate 1.6mm thick galvanised steel 18 Product Information

21 Introduction H1 " " Size Selection Charts H2 Single Door Enclosure D1 92 W2 W3 D1 D2 D3 27 Top Opening D1 D2 D3 Detail Additional Dimensions W2 W3 Front Opening Height, H2 = (H1 94) Width, W2 = ( 90) Front View Side View Side Opening Height, H2 = (H1 94) Depth, D2 = (D1 99) Top Opening Width, W2 = ( 90) Depth, D2 = (D1 99) Bottom Fixings Width, W3 = ( 131) Depth, D3 = (D1 140) Product Information 1800mm High 2000mm High 2200mm High Height Width Depth Height Width Depth Height Width Depth Catalogue No H1 D1 Catalogue No H1 D1 Catalogue No H1 D1 LQE LQE LQE LQE LQE LQE LQE LQE LQE LQE LQE LQE Technical Guide LQE LQE LQE LQE LQE LQE LQE LQE LQE LQE LQE LQE LQE LQE LQE For more information visit B&R Enclosures ilinq Catalogue

22 Double Door Enclosure brenclosures.com.au/lqdde.htm Enclosure Features Galvanised roll formed profile Stainless steel hinge pins Symmetrical frame Patented plinth system (optional) Front access M6 & M8 cage nuts in frame Materials Frame galvanised steel Thickness 1.5mm Cladding zinc coated steel Thickness 1.6mm Gasket polyurethane foamed in place Surface finish powdercoated RAL7035 Protection rating IP55 ilinq double door enclosures feature a unique symmetrical rail profile that allows components to be interchangeable whether on top, bottom, front or back. The enclosures can be bayed with any combination of single or double door enclosure widths. The heights and depths must be the same. Once bayed together or fitted with side panels, enclosures are rated to IP55, ensuring limited ingress of dust and complete protection from low pressure jets of water. The enclosure is powdercoated with a light grey RAL7035 ripple finish. Other colours and solutions are available upon request. Inclusions Frame Rear fixed panel (screw on type) Flat top with four eye bolts 2 Solid doors 1st closing door has 2 locking points 2nd closing door has 4 locking points Quarter turn lock with a 7mm square insert Mounting Pan 3mm thick galvanised Fixed gland plates 2 x 1.6mm thick galvanised steel 20 Product Information

23 Introduction H1 W2 W3 Double Door Enclosure D1 D2 D3 27 Top Opening " D1 D2 D3 H2 D1 92 " Detail Additional Dimensions W2 W3 Size Selection Charts Front Opening Height, H2 = (H1 94) Width, W2 = ( 90) Front View Side View Side Opening Height, H2 = (H1 94) Depth, D2 = (D1 99) Top Opening Width, W2 = ( 90) Depth, D2 = (D1 99) Bottom Fixings Width, W3 = ( 131) Depth, D3 = (D1 140) Product Information 1800mm High 2000mm High 2200mm High Height Width Depth Height Width Depth Height Width Depth Catalogue No H1 D1 Catalogue No H1 D1 Catalogue No H1 D1 LQE180804/DD LQE181004/DD LQE181204/DD LQE180806/DD LQE181006/DD LQE181206/DD LQE180808/DD LQE181008/DD LQE181208/DD LQE200804/DD LQE201004/DD LQE201204/DD LQE200806/DD LQE201006/DD LQE201206/DD LQE200808/DD LQE201008/DD LQE201208/DD LQE220804/DD LQE221004/DD LQE221204/DD LQE220806/DD LQE221006/DD LQE221206/DD LQE220808/DD LQE221008/DD LQE221208/DD Technical Guide For more information visit B&R Enclosures ilinq Catalogue

24 Frame brenclosures.com.au/lqf.htm Frame Features Galvanised roll formed profile High frequency welded Symmetrical frame Ideal for custom suites 316 stainless steel hinge pins Front access M6 & M8 cage nuts Materials Galvanised steel Thickness 1.5mm ilinq frames are ideal when the enclosures are to be bayed together into a customised suite and are available preassembled. Doors, side panels, tops, gland plates, plinths and other accessories can be added to the frame so that it is configured to the specific requirements of the application. Inclusions Symmetrical frame 16 cladding mounts Stainless steel hinge pins 22 Product Information

25 Introduction Frame D1 H2 W2 W3 D1 D2 D3 27 Top Opening D1 D2 D3 Detail Additional Dimensions H1 W2 W3 Size Selection Charts Front Opening Height, H2 = (H1 94) Width, W2 = ( 90) Front View Side View Side Opening Height, H2 = (H1 94) Depth, D2 = (D1 94) Top Opening Width, W2 = ( 90) Depth, D2 = (D1 90) Bottom Fixings Width, W3 = ( 131) Depth, D3 = (D1 131) Product Information 1800mm High 2000mm High 2200mm High Height Width Depth Height Width Depth Height Width Depth Catalogue No H1 D1 Catalogue No H1 D1 Catalogue No H1 D1 LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF Technical Guide LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF LQF For more information visit B&R Enclosures ilinq Catalogue

26 Single Door brenclosures.com.au/lqsd.htm Single Door Features Support loads up to 100kg 4 hinge and locking points Suitable for enclosures up to 800mm wide Quick & easy installation Materials Body zinc coated steel Thickness 1.6mm Gasket polyurethane foamed in place Surface finish powdercoated RAL7035 ilinq doors can be fitted on any vertical surface of the frame, front, rear or either side in right or left hand configurations.they are available in a variety of styles to suit the application including: Doors fitted with windows (indicated by /W on the part number) Vented doors (indicated by /V on the part number) All ilinq doors are stiffened to support loads of up to 100 kg and come complete with 4 hinge and locking points and a quarter turn locking system with a 7mm square insert. Standard single doors can be fitted in minutes to all four sides of the frame in every combination of left or right hand hinge. Single doors are suitable for enclosures up to 800mm wide. A key lockable (92268) swing handle is available as an option. Lock inserts with 8mm triangle, 8mm square and 3mm double bit can be purchased seperately. Two M6 earth studs are included. See page 26 for information on double doors. Inclusions Symmetrical door 19 x 19mm door stiffener rails 4 hinge and locking points 7mm square quarter turn lock Earth strap kit 24 Product Information

27 Introduction W2 W3 W4 H2 Size Selection Charts H4 H3 55 H Single Door " H1 " Front View Internal View Side View Single Door Catalogue No External Single Door Door Rail Fixing Points Internal Stiffener Rail Window Size Height Width Height Width Height Width Height Width Solid Door Window Door Vented Door H1 H2 W2 H3 W3 H4 W4 LQD LQD1806 LQD1806/W LQD1806/V LQD1808 LQD1808/W LQD1808/V LQD LQD2006 LQD2006/W LQD2006/V LQD2008 LQD2008/W LQD2008/V LQD LQD2206 LQD2206/W LQD2206/V LQD2208 LQD2208/W LQD2208/V Product Information Technical Guide For more information visit B&R Enclosures ilinq Catalogue

28 Double Door brenclosures.com.au/lqdd.htm Double Door Features Support loads up to 100kg 4 hinge and locking points Suitable for enclosures 800mm and wider Quick & easy installation Materials Body Zinc coated steel Thickness 1.6mm Gasket polyurethane foamed in place Surface finish powdercoated RAL7035 ilinq double doors can be fitted to any vertical surface of the frame, front, rear or either side. They are available in a variety of styles to suit the application including: Doors fitted with windows (indicated by /W on the part number) Vented doors (indicated by /V on the part number) All ilinq doors are stiffened to support loads of up to 100 kg and come complete with 4 hinge and locking points and a quarter turn locking system with a 7 mm square insert. Standard double doors can be fitted in minutes to all four sides of the frame in every combination of left and right hand hinge. Double doors are available as an option for 600mm wide enclosures. A key lockable (92268) swing handle is available as an option. Lock inserts with 8mm triangle, 8mm square and 3mm double bit can be purchased seperately. Two M6 earth studs on each door are included. See page 24 for information on single doors. Inclusions Symmetrical door with mullion first closing Symmetrical door with lock second closing 19 x 19mm door stiffener rail 4 hinge and 2 locking points on first closing door 4 hinge and locking points on second closing door 7mm square quarter turn lock Earth strap kit 26 Product Information

29 Introduction Size Selection Charts H1 W2 W3 W4 " W2 W3 W4 H " 55 H3 55 H4 H2 Double Door Front View Internal View Side View Double Door Catalogue No External Double Doors Stiffener Rail Fixing Points Internal Stiffener Rail Window Size Height Width Height Width Height Width Height Width Solid Door Window Door Vented Door H1 H2 W2 H3 W3 H4 W4 LQDD LQDD1810 LQDD1810/W LQDD1810/V LQDD1812 LQDD1812/W LQDD1812/V LQDD LQDD2010 LQDD2010/W LQDD2010/V LQDD2012 LQDD2012/W LQDD2012/V LQDD LQDD2210 LQDD2210/W LQDD2210/V LQDD2212 LQDD2212/W LQDD2212/V Product Information Technical Guide For more information visit B&R Enclosures ilinq Catalogue

30 Cladding brenclosures.com.au/lqc.htm Cladding Features Fit to any vertical frame surface Option of fixed or hinged cladding Supports loads of up to 100kg Materials Body zinc coated steel Thickness 1.6mm Gasket polyurethane foamed in place Surface finish powdercoated RAL7035 ilinq cladding panels can be fitted on any vertical surface of the frame, front, rear or either side. They are available in two configurations: Fixed Screw fixed to 8 hinge/cladding points assembled on the frame. Hinged Screw fixed to one side and hinged on the other. ilinq panels will support loads of up to 100kg. Two M6 earth studs are included. Inclusions (Fixed) Symmetrical fixed panel Eight M6 x 12 button head hex drive set screws Earth strap kit Inclusions (Hinged) Symmetrical hinged panel Four M6 x 12 button head hex drive set screws 4 hinges Earth strap kit 28 Product Information

31 Fixed Size Selection Charts Introduction H1 Hinged H Front View Side View Front View Side View Cladding External Catalogue No Height Width Fixed Panel Hinged Panel H1 LQCF1804 LQCP LQCF1806 LQCP LQCF1808 LQCP LQCF1810 LQCP LQCF1812 LQCP LQCF2004 LQCP LQCF2006 LQCP LQCF2008 LQCP LQCF2010 LQCP LQCF2012 LQCP LQCF2204 LQCP LQCF2206 LQCP LQCF2208 LQCP LQCF2210 LQCP LQCF2212 LQCP Product Information Technical Guide For more information visit B&R Enclosures ilinq Catalogue

32 Top Cover brenclosures.com.au/lqtc.htm Top Cover Features Flat or vented options available 4xM12 Eyebolts (flat top) Materials Zinc coated steel Thickness 1.6mm Gasket polyurethane foamed in place Surface finish powdercoated RAL7035 ilinq top covers are available in two variations flat or vented. Flat top covers are used for sealing the top of the enclosure and come with four M12 eyebolts for lifting (SWL 1360kg). They come complete with all fixings required for installation and two M6 earth studs. Vented top covers are typically used when the enclosure is positioned in a controlled environment and additional cooling air flow is required. They come complete with all fixings required for installation and two M6 earth studs (vented option does not come with M12 eyebolts). A gland plate system can also be used on the top of the frame, if required. Refer to page 32 for information on gland plate systems. Inclusions (Flat Top Cover) Symmetrical flat top 4 x M12 eyebolts Sealing washers 4 x internal tube nut fixings (Double door enclosures have 6 fixing points) Earth strap kit All fixings Inclusions (Vented Top Cover) Symmetrical vented top 4 x M8 x 50 hexagonal spacers 8 x M8 x 25 button head hex drive set screws 8 x M8 star washers Earth strap kit All fixings 30 Product Information

33 Flat Introduction D1 D2 W2 24 Top View Side View Vented D1 D2 W2 Size Selection Charts 50 Top Cover Top View Side View External Fixing Position Catalogue No Width Depth Width Depth Flat Vented D1 W2 D2 LQTF0404 LQTV LQTF0604 LQTV LQTF0804 LQTV LQTF1004 LQTV LQTF1204 LQTV LQTF0606 LQTV LQTF0806 LQTV LQTF1006 LQTV LQTF1206 LQTV LQTF0808 LQTV LQTF1008 LQTV LQTF1208 LQTV Product Information Technical Guide For more information visit B&R Enclosures ilinq Catalogue

34 Gland Plate and Frame brenclosures.com.au/lqgpf.htm Gland System Features Fitted internally or externally into top or bottom of frame Large glanding area Easy access when fitting or removing Available as a kit or configured for special applications Materials Frame aluminium extrusion Gasket closed cell neoprene Plate options 1.6mm galvanised steel 3mm brass 6mm aluminium The ilinq gland plate kit consists of an extruded aluminium frame fitted with a fixed 1.6 mm galvanised steel gland plate. To build a customised gland plate system the frame and optional gland plate material can be purchased separately and configured to suit the application. Inclusions (Gland Kit) Symmetrical extruded aluminium frame Symmetrical 1.6 mm galvanised steel gland plates 1000mm & 1200mm wide 2 fixed gland plates and centre mullion. All fixings Inclusions (Gland Plates) Symmetrical gland plate in selected material All fixings NOTE: Gland frame puchased separately Inclusions (Gland Frame) Symmetrical extruded aluminium frame All fixings NOTE: Gland plates puchased separately 32 Product Information

35 Gland Frame Size Selection Charts D1 Top View 26 Side View Introduction Gland Plate D2 W2 Top View Gland Plate & Frame Gland Plate Kit Gland Frame Gland Plate 1.6 mm steel Gland Plate 6mm Aluminium Gland Plate 3 mm Brass Opening Size Plate Size Width Depth Width Depth D1 W2 D2 LQGK0404 LQGF0404 LQGP0404 LQGP0404/A6 LQGP0404/B LQGK0604 LQGF0604 LQGP0604 LQGP0604/A6 LQGP0604/B LQGK0804 LQGF0804 LQGP0804 LQGP0804/A6 LQGP0804/B LQGK1004 LQGF1004 LQGP1004 LQGP1004/A6 LQGP1004/B LQGK1204 LQGF1204 LQGP1204 LQGP1204/A6 LQGP1204/B LQGK0606 LQGF0606 LQGP0606 LQGP0606/A6 LQGP0606/B LQGK0806 LQGF0806 LQGP0806 LQGP0806/A6 LQGP0806/B LQGK1006 LQGF1006 LQGP1006 LQGP1006/A6 LQGP1006/B LQGK1206 LQGF1206 LQGP1206 LQGP1206/A6 LQGP1206/B LQGK0808 LQGF0808 LQGP0808 LQGP0808/A6 LQGP0808/B LQGK1008 LQGF1008 LQGP1008 LQGP1008/A6 LQGP1008/B LQGK1208 LQGF1208 LQGP1208 LQGP1208/A6 LQGP1208/B Product Information Technical Guide For more information visit B&R Enclosures ilinq Catalogue

36 Adjustable Gland Plate System brenclosures.com.au/lqagp.htm Adjustable Gland Plate Features Fitted internally or externally into top or bottom of frame Large glanding area Easy access when fitting or removing Available as a kit Materials Frame aluminium extrusion Plate 1.6mm galvanised steel Gasket closed cell neoprene or foamed in place polyurethane ilinq adjustable gland plate systems are optional in enclosures 600mm (depth or width) and above. Gland plates can be fitted either internally or externally into the bottom or top of new or existing enclosures. The adjustable gland plate kit is supplied with an extruded aluminium frame and one set of 3 plates (2 fixed, 1 sliding) of 1.6mm galvanised steel for 600mm and 800mm wide frames and 2 sets for 1000mm and 1200mm wide frames. The sliding plate can be adjusted to form an opening or removed to punch holes as required. The plates are secured by serrated clamp nuts for effective earthing. Inclusions Extruded aluminium frame 1.6mm steel gland plates (see page 35 for quantities) All fixings 34 Product Information

37 W2 Introduction Gland Frame Top View Adjustable Gland Plate System Gland Plate Kit Number of plates Opening Size Overall Plate Size Individual Plate Width Depth Width Depth Depth W2 D2 D1 D3 LQGK0606/GA LQGK0806/GA LQGK1006/GA LQGK1206/GA LQGK0608/GA LQGK0808/GA LQGK1008/GA LQGK1208/GA Size Selection Charts Product Information Accessories LQGN Description Clamp nut for fixing gland plates to frame Technical Guide D3 D1 D2 Individual Plate Side Plate For more information visit B&R Enclosures ilinq Catalogue

38 Mounting Pan brenclosures.com.au/lqmp.htm Mounting Pan Features Stiffened to support load of up to 500kg Depth adjustable Infill panel available for bayed enclosures Materials Body galvanised steel Thickness 3mm Brackets ZA27 zinc alloy Metal mounting pans are manufactured from 3mm galvanised steel and are stiffened to support loads of up to 500kg. They are depth adjustable in 25mm increments and can be installed using slides that locate the pan into the correct position for mounting to the frame. Mounting pans can be mounted off any profile using the same mounting pan bracket and fixings. In bayed enclosure systems a mounting pan infill panel is available to fill the space between the mounting pans. The mounting pan infill brackets can be mounted on either horizontal or vertical frame profile rails. Inclusions (Mounting Pan) Summetrical 3mm galvanised steel mounting pan 4 mounting brackets All fixings Inclusions (Infill Panel) Summetrical 3mm galvanised steel mounting pan 2 mounting brackets All fixings 36 Product Information

39 Size Selection Charts Introduction Mounting Pan Infill Panel 124 W2 H1 H2 H Front View Side View Front View Side View Mounting Pan Size Fixings Height Width Height Width Catalogue No. H1 H2 W2 LQMP LQMP LQMP LQMP LQMP LQMP LQMP LQMP LQMP LQMP LQMP LQMP LQMP LQMP LQMP Mounting Pan Infill Panel (for bayed systems) Catalogue No. Size Height H1 LQMF LQMF LQMF Product Information Technical Guide For more information visit B&R Enclosures ilinq Catalogue

40 Swing Frames brenclosures.com.au/lqsf.htm Swing Frame Features Suitable for mounting 19 equipment Allows easy access to equipment Suitable for loads of up to 100kg when installed internally Suitable for loads of up to 80kg when installed externally Materials Frame 76 x38 mm RHS Thickness 2.5 mm ilinq swing frames are used to install 19" rack mounted equipment which allows access to both the front and rear without having to remove or open cladding on the side or back of the enclosure. The swing frames are very robust, constructed from 76 x 38 x 2.5 mm RHS and are suitable for loads of up to 100kg when installed internally or 80kg when installed externally. A horizontal swing frame rail set is required to mount the swing frame which are available in widths to suit the enclosure (purchased seperately). There are two mounting positions internal 135 and external 180. The internal position is suitable for heavy equipment (100kg) and can be swung up to 135. The external position is rated to carry slightly lower weights (80kg), but swings out to a full 180. This gives unrestricted access to the inside of the enclosure. For 800mm and wider enclosures, a swing frame trim (refer to page 40) is available to suit installation of the swing frame in either the centre, left or right sides. The trim consists of symmetrical panels, a single panel for the left or right hand installations and two symmetrical panels for centre installation. The trim panels are constructed from 1.6mm zinc coated steel powdercoated mist blue (white) gloss and are attached to the swing frame using the fixings supplied. Inclusions (19" Swing Frame) Swing frame 2 x slotted turnbuckle locks RU indicator tape All fixings NOTE: Horizontal swing frame rails purchased separately 38 Product Information

41 19" Swing Frame 135º Size Selection Charts Introduction 497 H " Swing Frame 180º 497 H Front View Side View Front View Side View Horizontal Swing Frame Rails 20 Product Information W2 105 Front View Top View 19" Swing Frame Catalogue No. Height H1 To Fit Frame Height (mm) RU LQSF36U LQSF40U LQSF45U Horizontal Swing Frame Rails Width Fixing Width To Fit Frame Catalogue No. W2 Width (mm) LQRF LQRF Technical Guide For more information visit B&R Enclosures ilinq Catalogue

42 Swing Frame Trims brenclosures.com.au/lqsft.htm Swing Frame Trims Features Symmetrical panels Side mount or centre mount Materials Zinc coated steel Thickness 1.6 mm Surface finish powdercoated Note: Image shows centre mount trim For enclosures 800mm and wider, a swing frame trim is available to suit the installation of a swing frame in either the centre, left or right sides. The trim consists of symmetrical panels, a single panel for the left or right hand installations and two symmetrical panels for centre installation. The trims are constructed from 1.6mm zinc coated steel powdercoated mist blue (white) gloss. Trims are securely fixed to the swing frame and help direct airflow through the 19" rack mounted equipment. The trims also assist to make the equipment mounted to the rear of the swing frame secure. Inclusions (Centre Mount) Symmetrical swing frame trims (2) All fixings Inclusions (Side Mount) Symmetrical swing frame trim All fixings 40 Product Information

43 Swing Frame Trim Side Swing Frame Trims Centre (2) Product Information Size Selection Charts H1 Introduction Front View H Top View Front View 99 Top View Swing Frame Trim - Side Catalogue No. Height H1 To Fit Swing Frame RU LQSS36U LQSS40U LQSS45U Swing Frame Trims - Centre (2) Catalogue No. Height H1 To Fit Swing Frame RU LQSC36U LQSC40U LQSC45U Technical Guide For more information visit B&R Enclosures ilinq Catalogue

44 19" Rack Rails brenclosures.com.au/lqrr.htm 19" Rack Rail Features Rails are EIA-10-D compliant Easy identifiable RU positioning Supplied as a pair Square holes punched at ½ RU increments Materials Zinc coated steel Thickness 2.0mm 19" rack rails are supplied as a pair (one left and one right) with all fixings included and are made from 2mm zinc coated steel powdercoated mist blue (white) gloss. The rails are EIA-10-D compliant with square holes punched at ½ RU increments suitable for standard rear access cage nuts. Matrix rails are required to mount the 19 rack rails and are purchased seperately. Inclusions Left and right rails (2) RU indicator tape All fixings NOTE: Matrix rails purchased separately 42 Product Information

45 19" Rack Rails 600mm wide 19" Rack Rails 800mm wide H1 Introduction H1 Front View Front View Size Selection Charts 19" Rack Rails 600mm wide Catalogue No. Height H1 To Fit Frame Height (mm) To Suit Enclosure Width (mm) RU # Min. No of matrix rails LQRR38U LQRR42U LQRR47U Product Information # For matrix rails refer to pages " Rack Rails 800mm wide Catalogue No. Height H1 To Fit Frame Height (mm) To Suit Enclosure Width (mm) RU # Min. No of matrix rails LQRR38U/ LQRR42U/ LQRR47U/ # For matrix rails refer to pages Technical Guide For more information visit B&R Enclosures ilinq Catalogue

46 Internal Rail System (IRS) brenclosures.com.au/lqirs.htm Internal Rail Features Matrix Rail suitable for heavier or complex configurations, mountable in any direction Profile Rails suitable for mounting lighter components Door Rail fits into the stiffening frame on the internal side of the door Materials Matrix Rail galvanised steel Dimensions 75 x 19 x 1.6mm Profile Rail zinc coated steel Dimensions 50 x 18 x 1.6mm 25x18x1.6mm Door Rail zinc coated steel Dimensions 19 x 18 x 1.6mm Surface finish profile & door rail powdercoated A matrix rail is typically used for heavier or complex configurations. It can be mounted to the frame profile, to other rails and any combination of frame and rails in any direction height, width or depth. Accessories and equipment can be fitted to the matrix rails by using front access cage nuts (M6 or M8) or M5 taptites at 25mm increments. Matrix rail is supplied in 21 sizes in 100mm increments to suit standard ilinq frame dimensions. Profile rails are typically used to hold lighter items in the enclosure and it is suitable for front access cage nuts (M6 or M8) or M5 taptites. The profile rail is self aligning and fits between the frame profile of the enclosure and is secured by M5 taptites. The profile rails are available in both 25mm and 50mm sizes to suit all enclosure depths only. A door rail is used for supporting any door mounted equipment and are secured to the door stiffener rail with M5 taptites. Door rails are supplied in all door widths. Profile rails and door rails are powdercoated mist blue (white) gloss. Inclusions (Matrix Rail) Symmetrical matrix rail Die cast ends (2) All fixings Inclusions (Profile Rail) Symmetrical profile rail All fixings Inclusions (Door Rail) Symmetrical door rail All fixings NOTE: Front access cage nuts for all rails purchased separately (refer to page 17) 44 Product Information

47 Matrix Rail mm Profile Rail W2 Front View Side View Introduction Front View Side View 50 mm Profile Rail W Door Rail Front View W2 Side View Size Selection Charts Front View Side View Matrix Rail Catalogue No. Width To suit Frame Size LQRM LQRM LQRM mm Profile Rail Width Fixings To suit Catalogue No. W2 Frame Size LQRP04/ LQRP06/ LQRP08/ Product Information LQRM LQRM LQRM LQRM LQRM LQRM LQRM LQRM LQRM LQRM mm Profile Rail Width Fixings To suit Catalogue No. W2 Frame Size LQRP04/ LQRP06/ LQRP08/ Matrix Rail Detail Technical Guide LQRM LQRM LQRM LQRM Door Rail Catalogue No. Width Fixing W2 To suit Door Width LQRM LQRM LQRM LQRM LQRD LQRD LQRD LQRD ø For more information visit B&R Enclosures ilinq Catalogue

48 Hinged Escutcheon brenclosures.com.au/lqhe.htm Hinged Escutcheon Features Suitable for loads of up to 25kg Slotted cam locks (2) Recessed handle Materials Zinc coated steel Thickness 1.6mm Surface finish powdercoated The ilinq hinged escutcheon is manufactured from 1.6mm zinc coated steel and is suitable for loads of up to 25kg. The escutcheon is powdercoated mist blue (white) gloss. It is supplied with all fixings necessary for installation onto the escutcheon rail. Vertical hinged escutcheon rails are required when fitting escutcheons. To comply with IEC60529 IP2X specifications, horizontal rails can be used. All escutcheon rails are powdercoated mist blue (white) gloss. Inclusions (Matrix Rail) Symmetrical Escutcheon 2 x ¼ turn slotted locks All fixings NOTE: Vertical and horizontal escutcheon rails purchased separately 46 Product Information

49 Escutcheon Vertical Rail (2) Horizontal Rail (2) Optional 18 Introduction Size Selection Charts H1 Top View Bottom View " H1 H2 " Front View Side View Hinged Escutcheon Escutcheon Locking Height Width Height Suits Catalogue No. H1 H2 Height Width LQHE LQHE LQHE LQHE LQHE LQHE Vertical Rail (2) Catalogue No. Height H1 Suits Height LQRV LQRV LQRV Horizontal Rail (2) Width Catalogue No. Suits Width LQRH LQRH Note: Horizontal rails required for IP2X applications. Product Information Technical Guide For more information visit B&R Enclosures ilinq Catalogue

50 Plinth Kit brenclosures.com.au/lqpk.htm Plinth Kit Features Diecast corner pieces Multiple fixing points Levelling feet Easy access to the bottom of the enclosure Front cladding Option of solid or vented Access for pipe lifting Option of 100mm or 200mm high Materials Plinth feet ZA27 diecast Plinth cladding zinc coated steel Thickness 1.2mm Surface finish powdercoated ilinq plinths are designed to raise the enclosure off the floor to allow access to cabling. The plinth kit includes 4 diecast corner feet (200mm high plinths use 8 corner feet) and 2 covers for the front and rear, 4 levelling feet and all fixings. For vented plinth applications use suffix /V when ordering. Plinth cladding features 40mm pipe lifting access holes and plugs and are held in place with two M5 button head hex drive set screws. Plinth feet and covers are powdercoated textured matt black. Inclusions 4 diecast corner feet on 100mm high plinths 8 diecast corner feet on 200mm high plinths Levelling feet (4) 4 Plinth foot corner covers (8 required on 200mm high) Front & rear cladding All fixings 48 Product Information

51 Solid Plinth Kit Introduction Vented Plinth Kit Size Selection Charts H1 H1 W3 Front View Top View W2 W3 Side View Top View Product Information 100mm Plinth Kits Catalogue No Plinth Kits 100mm high Fixing Dimensions Solid Vented H1 W2 W3 LQP0104 LQP0104/V LQP0106 LQP0106/V LQP0108 LQP0108/V LQP0110 LQP0110/V LQP0112 LQP0112/V mm Plinth Kits Catalogue No Plinth Kits 200mm high Fixing Dimensions Solid Vented H1 W2 W3 LQP0204 LQP0204/V LQP0206 LQP0206/V LQP0208 LQP0208/V LQP0210 LQP0210/V LQP0212 LQP0212/V Technical Guide For more information visit B&R Enclosures ilinq Catalogue

52 Plinth Cladding brenclosures.com.au/lqpc.htm Plinth Cladding Features Easy access to the bottom of the enclosure Access for pipe lifting Option of solid or vented Option of 100mm or 200mm high Materials Zinc coated steel Thickness 1.2mm Surface finish powdercoated Plinth cladding is available in 100mm and 200mm high options with 40mm pipe lifting access holes and plugs. Cladding is manufactured from 1.2mm zinc coated steel and is powdercoated textured matt black. Available in solid or vented options, the plinth cladding is held in place with two M5 button head hex drive set screws. Inclusions Plinth cladding (1) All fixings 50 Product Information

53 Solid Plinth Cladding Introduction H1 Front View Vented Plinth Cladding H1 Front View Size Selection Charts Plinth Cladding - 100mm high Cladding 100 mm high Catalogue No Height Width Solid Vented H1 LQPC0104 LQPC0104/V LQPC0106 LQPC0106/V LQPC0108 LQPC0108/V LQPC0110 LQPC0110/V LQPC0112 LQPC0112/V Plinth Accessories Product Code Description LQPF Die-cast corner foot kit (4) LQPS02 Plinth stacking kit for 200 mm high plinths Plinth Cladding - 200mm high Cladding 200mm high Catalogue No Height Width Solid Vented H1 LQPC0204 LQPC0204/V LQPC0206 LQPC0206/V LQPC0208 LQPC0208/V LQPC0210 LQPC0210/V LQPC0212 LQPC0212/V LQPF LQPS02 Product Information Technical Guide For more information visit B&R Enclosures ilinq Catalogue

54 Plinth Mounting Base brenclosures.com.au/lqpmb.htm Plinth Mounting Base Features Suitable for installation via pipe rollers Access for pipe lifting Heavy duty Front access cover Materials Galvanised steel Thickness 3mm Gasket closed cell neoprene Surface finish powdercoated ilinq s plinth mounting base is an alternative structural base designed for installations where manoeuvring the enclosure into position requires the use of pipe rollers. The mounting base features a removable front cover, with the fixing holes accessed through the frame base. Mounting base is powdercoated textured matt black. Inclusions Plinth mounting base Closed cell neoprene gasket All enclosure to base fixings 52 Product Information

55 Size Selection Charts Technical Guide H1 Introduction Front View D1 65 D2 Plinth Mounting Base W Product Information Top View Plinth Mounting Base Height Width Depth Opening Catalogue No. H1 D1 W2 D2 LQPB LQPB LQPB LQPB LQPB LQPB LQPB LQPB LQPB LQPB LQPB LQPB LQPB LQPB LQPB For more information visit B&R Enclosures ilinq Catalogue

56 Plan Holder brenclosures.com.au/lqph.htm Plan Holder Features A4 only - 400mm wide door A4 & A3-500mm & 600mm doors Depths of 35mm & 80mm Fix to the inside of the door Materials Zinc coated steel Thickness 1.6mm Surface finish powdercoated On 400mm and 500mm wide doors the plan holder screws directly to the door stiffener rails and does not require a door rail. On 600mm and 800mm wide doors, a door rail is required for installation. All plan holders are available in 35 and 80 mm depths and accept both A4 and A3 documents. Plan holders are powdercoated mist blue (white) gloss. Note: A 400mm wide door will accept A4 only. Inclusions Plan holder All fixings NOTE: Door rail required for 600mm & 800mm door widths purchased separately. 54 Product Information

57 Plan Holder 400mm & 500mm wide Product Information Size Selection Charts D1 273 Front View Side View Introduction Plan Holder 600mm wide D Front View Side View Plan Holder - 400mm wide door Width Depth Catalogue No D1 Suits LQPH04/ A4 LQPH04/ A4 Plan Holder - 500mm wide door Width Depth Catalogue No D1 Suits LQPH05/ A3 Portrait LQPH05/ A3 Portrait Plan Holder - 600mm & 800mm wide door Depth Product Code D1 Suits LQPH06/35* 35 A3 LQPH06/80* 80 A3 * Note: door rail required Technical Guide For more information visit B&R Enclosures ilinq Catalogue

58 Laptop Lectern brenclosures.com.au/lqll.htm Laptop Lectern Features To suit 600mm & 800mm wide doors Fix to the internal side of the door Materials Body zinc coated steel Cladding thickness 1.6mm Surface finish powdercoated The ilinq hinged laptop lectern has been designed to allow fast and easy access when using a laptop computer. Dimensions are 300mm deep x 440mm wide and is suitable for holding up to 15kg. The laptop lectern has been designed to fit between the door stiffening rails on 600mm and 800mm doors and protrudes approx 25mm past the door stiffener rails when not in use. Two door rails (purchased separately) are required for installation. The laptop lectern is powdercoated mist blue (white) gloss. Inclusions Laptop Lectern All fixings NOTE: Two (2) Door rails required (purchased separately) 56 Product Information

59 Technical Guide Product Information Introduction Laptop Lectern º 24 Front View 318 Size Selection Charts Side View Laptop Lectern Product Code Description LQLL Laptop Lectern for ilinq range For more information visit B&R Enclosures ilinq Catalogue

60 Light Kits brenclosures.com.au/lqlk.htm Light Kit Features Door switch Fluorescent or LED Mounting brackets Materials Body zinc coated steel Thickness 1.6mm Surface finish powdercoated The Light Kits are available as 2 options Fluorescent or LED. Each light comes complete with light diffuser, door switch and mounting brackets. They can also be mounted directly to profile or matrix rails. The 10W LED option is a slim fitting light. This option allows for opening of full height swing frames or escutcheons when fitted. Inclusions (Fluorescent Light Kit) 15W fitting Diffuser Door micro switch Mounting brackets All fixings Inclusions (LED Light Kit) 10W LED fitting Diffuser 24VDC driver Door micro switch Mounting brackets All fixings 58 Product Information

61 LED Light Kit Introduction Fluorescent Light Kit Front View End View Front View End View Door Switch (supplied with each light kit) Size Selection Charts Front View Side View Product Information Fluorescent Light Kit Product Code LQLK15W 15 Watt Fluorescent Light Kit Note: To suit frames 800mm wide and above LED Light Kit Product Code LQLK10W/L8 10 Watt LED Light Kit Note: To suit frames 800mm wide and above Technical Guide For more information visit B&R Enclosures ilinq Catalogue

62 IP Ratings Protection provided by enclosures for electrical equipment is indicated by the IP Code, basically by the two characteristic numerals. First Numeral Protection against the ingress of solid particles IP Second Numeral Protection against harmful ingress of water IP Requirements Example Protection of persons against access to hazardous parts with: 0 No protection Nonprotected 1 Full penetration of 50 mm diameter sphere not allowed. Contact with hazardous parts not permitted. 2 Full penetration of 12.5 mm diameter sphere not allowed. The jointed test finger shall have adequate clearance from hazardous parts. 3 The access probe of 2.5 mm diameter shall not penetrate. 4 The access probe of 1.0 mm diameter shall not penetrate Back of hand Finger Tool Wire IP Requirements Example Protection from water 0 No protection Nonprotected 1 Protected against vertically falling drops of water. Limited ingress permitted. 2 Protected against vertically falling drops of water with the enclosure tilted 15 from the vertical. Limited ingress perrmitted. 3 Protected against sprays to 60 from the vertical. Limited ingress permitted. 4 Protected against water splashed from all directions. Limited ingress permitted. Vertically dripping Dripping up to 15 from the vertical Limited spraying Splashing from all directions 5 Limited ingress of dust permitted (no harmful deposit). Wire 5 Protected against jets of water. Limited ingress permitted. Hosing jets from all directions 6 Totally protected against the ingress of dust. Wire 6 Protected against strong jets of water. Limited ingress permitted. Strong hosing jets from all directions 7 Protected against the effects of immersion between 15 cm and 1 m. 15cm min. Temporary immersion This Chart is intended to be read in conjunction with AS Degrees of protection provided by enclosures for electrical equipment (IP Code). The symbols shown on this chart are for explanatory purposes only. They are not part of the IP Code and must not be used instead of the Code. 8 Protected against long periods of immersion under pressure Continuous immersion 60 Technical Guide

63 Contents

64 HEAD OFFICE B&R Enclosures Pty Ltd Brisbane South Industrial Park 51 Stradbroke Street Heathwood, QLD 4110 PO Bo x 1151 Browns Plains BC, QLD 4118 P (07) F (07) sales@brenclosures.com.au Mobile Web brenclosures.mobi Web QUEENSLAND (BRISBANE) Head Office Brisbane South Industrial Park 51 Stradbroke Street Heathwood, QLD 4110 P (07) F (07) QUEENSLAND (TOWNSVILLE) 25 Dalrymple Road Garbutt, QLD 4814 P (07) F (07) NEW SOUTH WALES (SYDNEY) Unit 1 / 170 Power Street Glendenning NSW 2761 P (02) F (02) NEW SOUTH WALES (NEWCASTLE) Ross Joice Agencies Pty Ltd Broadmeadow Road Broadmeadow, NSW 2292 P (02) F (02) VICTORIA Sunmore Close Heatherton, VIC 3202 P (03) F (03) SOUTH AUSTRALIA 505 Grand Junction Road Wingfield, SA 5013 P (08) F (08) WESTERN AUSTRALIA 20 Millrose Drive Malaga, WA 6090 P (08) F (08) TASMANIA (LAUNCESTON) WP Martin Pty Ltd 85 Elizabeth Street Launceston, TAS 7250 P (03) F (03) NORTHERN TERRITORY Jewell Distributors Pty Ltd Cnr Hidden Valley & Beaton Roads Berrimah, NT 0828 P (08) F (08) CJ/BB